Commit graph

1,294,499 commits

Author SHA1 Message Date
Johannes Berg
085bc003ba um: mmu: remove stub_pages
I removed all the users of this some time ago, but
evidently forgot the pointers. Remove them from the
data structure too.

Fixes: bfc58e2b98 ("um: remove process stub VMA")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
2024-01-04 21:37:08 +01:00
Sergey Gorenko
2f1888281e IB/iser: Prevent invalidating wrong MR
The iser_reg_resources structure has two pointers to MR but only one
mr_valid field. The implementation assumes that we use only *sig_mr when
pi_enable is true. Otherwise, we use only *mr. However, it is only
sometimes correct. Read commands without protection information occur even
when pi_enble is true. For example, the following SCSI commands have a
Data-In buffer but never have protection information: READ CAPACITY (16),
INQUIRY, MODE SENSE(6), MAINTENANCE IN. So, we use
*sig_mr for some SCSI commands and *mr for the other SCSI commands.

In most cases, it works fine because the remote invalidation is applied.
However, there are two cases when the remote invalidation is not
applicable.
 1. Small write commands when all data is sent as an immediate.
 2. The target does not support the remote invalidation feature.

The lazy invalidation is used if the remote invalidation is impossible.
Since, at the lazy invalidation, we always invalidate the MR we want to
use, the wrong MR may be invalidated.

To fix the issue, we need a field per MR that indicates the MR needs
invalidation. Since the ib_mr structure already has such a field, let's
use ib_mr.need_inval instead of iser_reg_resources.mr_valid.

Fixes: b76a439982 ("IB/iser: Use IB_WR_REG_MR_INTEGRITY for PI handover")
Link: https://lore.kernel.org/r/20231219072311.40989-1-sergeygo@nvidia.com
Acked-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Signed-off-by: Sergey Gorenko <sergeygo@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2024-01-04 16:37:03 -04:00
Anton Ivanov
541d4e4d43 um: Fix naming clash between UML and scheduler
__cant_sleep was already used and exported by the scheduler.
The name had to be changed to a UML specific one.

Signed-off-by: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Reviewed-by: Peter Lafreniere <peter@n8pjl.ca>
Signed-off-by: Richard Weinberger <richard@nod.at>
2024-01-04 21:22:27 +01:00
Vincent Whitchurch
32253f00ac um: virt-pci: fix platform map offset
The offset is currently always zero so the backend can't distinguish
between accesses to different ioremapped areas.

Fixes: 522c532c4f ("virt-pci: add platform bus support")
Signed-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
2024-01-04 21:15:49 +01:00
Dmitry Torokhov
0c64117d11 Input: da9063_onkey - avoid explicitly setting input's parent
devm_input_allocate_device() already sets parent of the new input
device, there's no need to set it up explicitly.

Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/ZYOseYfVgg0Ve6Zl@google.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2024-01-04 12:02:20 -08:00
Naresh Solanki
1cadc04c1a
regulator: event: Ensure atomicity for sequence number
Previously, the sequence number in the regulator event subsystem was
updated without atomic operations, potentially leading to race
conditions. This commit addresses the issue by making the sequence
number atomic.

Signed-off-by: Naresh Solanki <naresh.solanki@9elements.com>
Link: https://msgid.link/r/20240104141314.3337037-1-naresh.solanki@9elements.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2024-01-04 20:02:06 +00:00
Dmitry Torokhov
ec4fcc6b6a Input: da9063_onkey - avoid using OF-specific APIs
There is nothing OF-specific in the driver, so switch from OF properties
helpers to generic device helpers.

Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/ZYOsUfKceOFXuCt5@google.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2024-01-04 12:01:51 -08:00
Ilya Leoshkevich
ecba66cb36 s390/bpf: Fix gotol with large offsets
The gotol implementation uses a wrong data type for the offset: it
should be s32, not s16.

Fixes: c690191e23 ("s390/bpf: Implement unconditional jump with 32-bit offset")
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/r/20240102193531.3169422-2-iii@linux.ibm.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2024-01-04 11:35:40 -08:00
Will Deacon
040113fa32 KVM: arm64: Add missing memory barriers when switching to pKVM's hyp pgd
In commit f320bc742b ("KVM: arm64: Prepare the creation of s1
mappings at EL2"), pKVM switches from a temporary host-provided
page-table to its own page-table at EL2. Since there is only a single
TTBR for the nVHE hypervisor, this involves disabling and re-enabling
the MMU in __pkvm_init_switch_pgd().

Unfortunately, the memory barriers here are not quite correct.
Specifically:

  - A DSB is required to complete the TLB invalidation executed while
    the MMU is disabled.

  - An ISB is required to make the new TTBR value visible to the
    page-table walker before the MMU is enabled in the SCTLR.

An earlier version of the patch actually got this correct:

  https://lore.kernel.org/lkml/20210304184717.GB21795@willie-the-truck/

but thanks to some badly worded review comments from yours truly, these
were dropped for the version that was eventually merged.

Bring back the barriers and fix the potential issue (but note that this
was found by code inspection).

Cc: Quentin Perret <qperret@google.com>
Fixes: f320bc742b ("KVM: arm64: Prepare the creation of s1 mappings at EL2")
Signed-off-by: Will Deacon <will@kernel.org>
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20240104164220.7968-1-will@kernel.org
2024-01-04 19:33:00 +00:00
Marc Zyngier
f4af13bd93 Merge branch kvm-arm64/vgic-6.8 into kvmarm-master/next
* kvm-arm64/vgic-6.8:
  : .
  : Fix for the GICv4.1 vSGI pending state being set/cleared from
  : userspace, and some cleanup to the MMIO and userspace accessors
  : for the pending state.
  :
  : Also a fix for a potential UAF in the ITS translation cache.
  : .
  KVM: arm64: vgic-its: Avoid potential UAF in LPI translation cache
  KVM: arm64: vgic-v3: Reinterpret user ISPENDR writes as I{C,S}PENDR
  KVM: arm64: vgic: Use common accessor for writes to ICPENDR
  KVM: arm64: vgic: Use common accessor for writes to ISPENDR
  KVM: arm64: vgic-v4: Restore pending state on host userspace write

Signed-off-by: Marc Zyngier <maz@kernel.org>
2024-01-04 19:28:15 +00:00
Oliver Upton
ad362fe07f KVM: arm64: vgic-its: Avoid potential UAF in LPI translation cache
There is a potential UAF scenario in the case of an LPI translation
cache hit racing with an operation that invalidates the cache, such
as a DISCARD ITS command. The root of the problem is that
vgic_its_check_cache() does not elevate the refcount on the vgic_irq
before dropping the lock that serializes refcount changes.

Have vgic_its_check_cache() raise the refcount on the returned vgic_irq
and add the corresponding decrement after queueing the interrupt.

Cc: stable@vger.kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20240104183233.3560639-1-oliver.upton@linux.dev
2024-01-04 19:26:34 +00:00
Jens Axboe
6ff1407e24 io_uring: ensure local task_work is run on wait timeout
A previous commit added an earlier break condition here, which is fine if
we're using non-local task_work as it'll be run on return to userspace.
However, if DEFER_TASKRUN is used, then we could be leaving local
task_work that is ready to process in the ctx list until next time that
we enter the kernel to wait for events.

Move the break condition to _after_ we have run task_work.

Cc: stable@vger.kernel.org
Fixes: 846072f16e ("io_uring: mimimise io_cqring_wait_schedule")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2024-01-04 12:21:08 -07:00
Linus Torvalds
5eff55d725 platform-drivers-x86 for v6.7-7
Revert P2SB / PCI deadlock fix due issue with older HW w/o P2SB.
 
 The following is an automated shortlog grouped by driver:
 
 p2sb:
  - Revert: Allow p2sb_bar() calls during PCI device probe
 -----BEGIN PGP SIGNATURE-----
 
 iHUEABYIAB0WIQSCSUwRdwTNL2MhaBlZrE9hU+XOMQUCZZbdygAKCRBZrE9hU+XO
 MX6wAQDFPp8Ko9EGGfBtBn3AoZZ12bcj1DOHi3FIafnfrFiBpAD/Q0v9qpL6PwI1
 dIS55gNAsv6RdOcBRSjXWJoySg3EcwA=
 =ILxf
 -----END PGP SIGNATURE-----

Merge tag 'platform-drivers-x86-v6.7-7' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86

Pull x86 platform driver fix from Ilpo Järvinen:
 "Unfortunately the P2SB deadlock fix broke some older HW and we need
  some time to figure out the best way to fix the issue so reverting the
  deadlock fix for now"

* tag 'platform-drivers-x86-v6.7-7' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
  Revert "platform/x86: p2sb: Allow p2sb_bar() calls during PCI device probe"
2024-01-04 10:58:51 -08:00
Linus Torvalds
08bd31ece0 sound fixes for 6.7-final
It became more than wished, partly because of vacations.
 But all changes are fairly device-specific and should be safe to
 apply.
 
 - A regression fix for Oops at ASoC HD-audio probe
 - A series of TAS2781 HD-audio codec fixes
 - A random build regression fix with SPI helpers
 - Minor endianness fix for USB-audio mixer code
 - ASoC FSL driver error handling fix
 - ASoC Mediatek driver register fix
 - A series of ASoC meson g12a driver fixes
 - A few usual HD-audio oneliner quirks
 -----BEGIN PGP SIGNATURE-----
 
 iQJCBAABCAAsFiEEIXTw5fNLNI7mMiVaLtJE4w1nLE8FAmWWcX4OHHRpd2FpQHN1
 c2UuZGUACgkQLtJE4w1nLE8FQRAAsZJ9O/FnNa/di4pJC+bmvADm/82swu3B1FUk
 bW/yMA25JvFU0aHv5LatoRzhzv3T5AawG85qTIL93zo+sBtputtu4rtmFnj0MY5Q
 uoOHV9PAgE1GhGvw4fOuxq2AqNViW7R9wsvDThEouqqO3/U11f4h3CEtKNS9AykG
 fdhvzfkq3wUeHOrWIcRn9ZFR2ej9Ziypc95CZ2ORR1RcOmGh3ZJ8jgSs1rGBYB1i
 F8y5kK1rl3nt1vDgBpCxj6pSPYNqsSNtgQRZw6Ie0oFuqxFQQ36Fxi4Hg0KLLFIp
 JrX9TPV9/s1JVO8qlhAtZ+frWFWmEcyvImh2Vzjg0/zXNULR/kxJ5W2b7XbGZxNS
 6jwp+6fgoRCqFfpXxyGSTM+GmoSWZhKKFgyGyCuXAMWK0XQC/om0aZv/+DYvn/sr
 X8fNBqGv4qMub60JfGsMCA/0StC1RYzGAGCcUCVL2Ihq4Rbf4jYd1T+/9pzFT1Fx
 hURnvlz2RDJH0CxsU4EVCKyz7aQ4PLYmKg1M8X4ow2MsGX2gx2plGbcBkPLN3Ta3
 kaqVSWk8YA1zG62xhAvI/UbKRGn7hv2AidIBN4daNMV23aHmRFqhgubLFRZCWHEo
 QPSzrBTJqfL+ySNxgtFvAS0AgVbM27HuF//I1nnvF8YrlwUHos+IH5ls54BFQLg0
 LYTQKIk=
 =+Nvo
 -----END PGP SIGNATURE-----

Merge tag 'sound-6.7-final' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound

Pull sound fixes from Takashi Iwai:
 "It became more than wished, partly because of vacations. But all
  changes are fairly device-specific and should be safe to apply:

   - A regression fix for Oops at ASoC HD-audio probe

   - A series of TAS2781 HD-audio codec fixes

   - A random build regression fix with SPI helpers

   - Minor endianness fix for USB-audio mixer code

   - ASoC FSL driver error handling fix

   - ASoC Mediatek driver register fix

   - A series of ASoC meson g12a driver fixes

   - A few usual HD-audio oneliner quirks"

* tag 'sound-6.7-final' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ALSA: hda/realtek: Fix mute and mic-mute LEDs for HP ProBook 440 G6
  ASoC: meson: g12a-tohdmitx: Fix event generation for S/PDIF mux
  ASoC: meson: g12a-toacodec: Fix event generation
  ASoC: meson: g12a-tohdmitx: Validate written enum values
  ASoC: meson: g12a-toacodec: Validate written enum values
  ASoC: SOF: Intel: hda-codec: Delay the codec device registration
  ALSA: hda: cs35l41: fix building without CONFIG_SPI
  ALSA: hda/realtek: fix mute/micmute LEDs for a HP ZBook
  ALSA: hda/realtek: enable SND_PCI_QUIRK for hp pavilion 14-ec1xxx series
  ASoC: mediatek: mt8186: fix AUD_PAD_TOP register and offset
  ALSA: scarlett2: Convert meter levels from little-endian
  ALSA: hda/tas2781: remove sound controls in unbind
  ALSA: hda/tas2781: move set_drv_data outside tasdevice_init
  ALSA: hda/tas2781: fix typos in comment
  ALSA: hda/tas2781: do not use regcache
  ASoC: fsl_rpmsg: Fix error handler with pm_runtime_enable
2024-01-04 10:51:16 -08:00
Linus Torvalds
5939a693dc drm fixes for 6.8
qaic:
 - fix GEM import
 - add quirk for soc version
 
 bridge:
 - parade-ps8640, ti-sn65dsi86: fix aux reads bounds
 
 mgag200:
 - fix gamma LUT init
 
 i915:
 - Fix bogus DPCD rev usage for DP phy test pattern setup
 - Fix handling of MMIO triggered reports in the OA buffer
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEEEKbZHaGwW9KfbeusDHTzWXnEhr4FAmWWDXMACgkQDHTzWXnE
 hr7EVw/9FHVVtslSRNgVUL2Jy1Y0wgw7pBb698HLw8pfpjeG9sGeyK26PYX1I1sz
 jRfnqqEsr87ymwAkvCGbYvrnS4Ljq8OGvU+FsxwuGWgrSD5HG87On1xHBmaQN29m
 V5Y8XDt6xUGvdB2p8qtERcfiKkw0GldsYhA1ZXi0TFkipPPHHK3ewiwSB5gGWeZF
 /b9ss1mAPUGB6K0169CfTjQpQoDzon4w+NRsVZnAuliodrIV8+jtAoU3La8ME60r
 Zfbf7zmYLfgMW0oWU+CYuhWolwZqsWWjBXer+lG3GytQ83BN7ggj5AZd+vfudv7T
 pnmnuSEy6QJrT3JkHQLM7hn5WXALrYQALMGxj6RxDcEVrziXWRvN5FmgTyR839kN
 PHmsRPdZtxs/smc6RjTYTQUeN6KSNGj0SK2zNVjxPBVMmo9vWeWPFiURQLDbxj49
 OMpNypSKHCXMhOG31HTrfoQ0K6q+dN9zDSxSP7oxO2cm05ZMoQOQK2lHBVz1BxBg
 hkwGadXKpRlKGbgDWLgGh+Ga0FDmHEC+0NWgJPiA2TbwUJp/9E5QWN+y9swxfRT/
 oEYscWasKenJJQZGaHaAsmDbTx9AdzX6YlXmER6aPwcq7zSv4NN6INGSln+oyfAf
 I+CruL0UmbOrdaQbt2jrWdK89NtBrFXJTF6U1Ks//Oa7k4RYnJY=
 =OvB8
 -----END PGP SIGNATURE-----

Merge tag 'drm-fixes-2024-01-04' of git://anongit.freedesktop.org/drm/drm

Pull drm fixes from Dave Airlie:
 "These were from over the holiday period, mainly i915, a couple of
  qaic, bridge and an mgag200.

  qaic:
   - fix GEM import
   - add quirk for soc version

  bridge:
   - parade-ps8640, ti-sn65dsi86: fix aux reads bounds

  mgag200:
   - fix gamma LUT init

  i915:
   - Fix bogus DPCD rev usage for DP phy test pattern setup
   - Fix handling of MMIO triggered reports in the OA buffer"

* tag 'drm-fixes-2024-01-04' of git://anongit.freedesktop.org/drm/drm:
  drm/i915/perf: Update handling of MMIO triggered reports
  drm/i915/dp: Fix passing the correct DPCD_REV for drm_dp_set_phy_test_pattern
  drm/mgag200: Fix gamma lut not initialized for G200ER, G200EV, G200SE
  drm/bridge: ps8640: Fix size mismatch warning w/ len
  drm/bridge: ti-sn65dsi86: Never store more than msg->size bytes in AUX xfer
  drm/bridge: parade-ps8640: Never store more than msg->size bytes in AUX xfer
  accel/qaic: Implement quirk for SOC_HW_VERSION
  accel/qaic: Fix GEM import path code
2024-01-04 10:48:03 -08:00
Quentin Deslandes
98e20e5e13 bpfilter: remove bpfilter
bpfilter was supposed to convert iptables filtering rules into
BPF programs on the fly, from the kernel, through a usermode
helper. The base code for the UMH was introduced in 2018, and
couple of attempts (2, 3) tried to introduce the BPF program
generate features but were abandoned.

bpfilter now sits in a kernel tree unused and unusable, occasionally
causing confusion amongst Linux users (4, 5).

As bpfilter is now developed in a dedicated repository on GitHub (6),
it was suggested a couple of times this year (LSFMM/BPF 2023,
LPC 2023) to remove the deprecated kernel part of the project. This
is the purpose of this patch.

[1]: https://lore.kernel.org/lkml/20180522022230.2492505-1-ast@kernel.org/
[2]: https://lore.kernel.org/bpf/20210829183608.2297877-1-me@ubique.spb.ru/#t
[3]: https://lore.kernel.org/lkml/20221224000402.476079-1-qde@naccy.de/
[4]: https://dxuuu.xyz/bpfilter.html
[5]: https://github.com/linuxkit/linuxkit/pull/3904
[6]: https://github.com/facebook/bpfilter

Signed-off-by: Quentin Deslandes <qde@naccy.de>
Link: https://lore.kernel.org/r/20231226130745.465988-1-qde@naccy.de
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2024-01-04 10:23:10 -08:00
Yonghong Song
9ddf872b47 bpf: Remove unnecessary cpu == 0 check in memalloc
After merging the patch set [1] to reduce memory usage
for bpf_global_percpu_ma, Alexei found a redundant check (cpu == 0)
in function bpf_mem_alloc_percpu_unit_init() ([2]).
Indeed, the check is unnecessary since c->unit_size will
be all NULL or all non-NULL for all cpus before
for_each_possible_cpu() loop.
Removing the check makes code less confusing.

  [1] https://lore.kernel.org/all/20231222031729.1287957-1-yonghong.song@linux.dev/
  [2] https://lore.kernel.org/all/20231222031745.1289082-1-yonghong.song@linux.dev/

Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20240104165744.702239-1-yonghong.song@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2024-01-04 10:18:14 -08:00
Imre Deak
9b0b61c5bc drm/i915/dp: Fix the PSR debugfs entries wrt. MST connectors
MST connectors don't have a static attached encoder, as their encoder
can change depending on the pipe they use; so the encoder for an MST
connector can't be retrieved using intel_dp_attached_encoder() (which
may return NULL for MST). Most of the PSR debugfs entries depend on a
static connector -> encoder mapping which is only true for eDP and SST
DP connectors and not for MST. These debugfs entries were enabled for
MST connectors as well recently to provide PR information for them, but
handling MST connectors needs more changes.

Fix this by not adding for now the PSR entries on MST connectors. To
make things more uniform add the entries for SST connectors on all
platforms, not just on platforms supporting DP2.0.

v2:
- Keep adding the entries for SST connectors. (Jouni)
- Add a TODO: comment for MST support.

Fixes: ef75c25e8f ("drm/i915/panelreplay: Debugfs support for panel replay")
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/9850
Cc: Animesh Manna <animesh.manna@intel.com>
Cc: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240103152609.2434100-1-imre.deak@intel.com
2024-01-04 19:22:26 +02:00
Dmitry Safonov
4c8530dc7d net/tcp: Only produce AO/MD5 logs if there are any keys
User won't care about inproper hash options in the TCP header if they
don't use neither TCP-AO nor TCP-MD5. Yet, those logs can add up in
syslog, while not being a real concern to the host admin:
> kernel: TCP: TCP segment has incorrect auth options set for XX.20.239.12.54681->XX.XX.90.103.80 [S]

Keep silent and avoid logging when there aren't any keys in the system.

Side-note: I also defined static_branch_tcp_*() helpers to avoid more
ifdeffery, going to remove more ifdeffery further with their help.

Reported-by: Christian Kujau <lists@nerdbynature.de>
Closes: https://lore.kernel.org/all/f6b59324-1417-566f-a976-ff2402718a8d@nerdbynature.de/
Signed-off-by: Dmitry Safonov <dima@arista.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Fixes: 2717b5adea ("net/tcp: Add tcp_hash_fail() ratelimited logs")
Link: https://lore.kernel.org/r/20240104-tcp_hash_fail-logs-v1-1-ff3e1f6f9e72@arista.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-01-04 09:07:04 -08:00
Jakub Kicinski
2e957f9c32 Merge branch '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue
Tony Nguyen says:

====================
Intel Wired LAN Driver Updates 2024-01-03 (i40e, ice, igc)

This series contains updates to i40e, ice, and igc drivers.

Ke Xiao fixes use after free for unicast filters on i40e.

Andrii restores VF MSI-X flag after PCI reset on i40e.

Paul corrects admin queue link status structure to fulfill firmware
expectations for ice.

Rodrigo Cataldo corrects value used for hicredit calculations on igc.

* '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
  igc: Fix hicredit calculation
  ice: fix Get link status data length
  i40e: Restore VF MSI-X state during PCI reset
  i40e: fix use-after-free in i40e_aqc_add_filters()
====================

Link: https://lore.kernel.org/r/20240103193254.822968-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-01-04 08:19:14 -08:00
Thomas Lange
382a32018b net: Implement missing SO_TIMESTAMPING_NEW cmsg support
Commit 9718475e69 ("socket: Add SO_TIMESTAMPING_NEW") added the new
socket option SO_TIMESTAMPING_NEW. However, it was never implemented in
__sock_cmsg_send thus breaking SO_TIMESTAMPING cmsg for platforms using
SO_TIMESTAMPING_NEW.

Fixes: 9718475e69 ("socket: Add SO_TIMESTAMPING_NEW")
Link: https://lore.kernel.org/netdev/6a7281bf-bc4a-4f75-bb88-7011908ae471@app.fastmail.com/
Signed-off-by: Thomas Lange <thomas@corelatus.se>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/20240104085744.49164-1-thomas@corelatus.se
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-01-04 08:18:55 -08:00
Cristian Ciocaltea
38709af26c drm/rockchip: vop2: Drop superfluous include
The rockchip_drm_fb.h header contains just a single function which is
not directly used by the VOP2 driver.  Drop the unnecessary include.

Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20240104143951.85219-1-cristian.ciocaltea@collabora.com
2024-01-04 17:17:25 +01:00
Shin'ichiro Kawasaki
b20712e853
Revert "platform/x86: p2sb: Allow p2sb_bar() calls during PCI device probe"
This reverts commit b28ff7a7c3.

The commit introduced P2SB device scan and resource cache during the
boot process to avoid deadlock. But it caused detection failure of
IDE controllers on old systems [1]. The IDE controllers on old systems
and P2SB devices on newer systems have same PCI DEVFN. It is suspected
the confusion between those two is the failure cause. Revert the change
at this moment until the proper solution gets ready.

Link: https://lore.kernel.org/platform-driver-x86/CABq1_vjfyp_B-f4LAL6pg394bP6nDFyvg110TOLHHb0x4aCPeg@mail.gmail.com/T/#m07b30468d9676fc5e3bb2122371121e4559bb383 [1]
Signed-off-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Link: https://lore.kernel.org/r/20240104114050.3142690-1-shinichiro.kawasaki@wdc.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2024-01-04 18:16:51 +02:00
Andrea Righi
c312828c37 kernfs: convert kernfs_idr_lock to an irq safe raw spinlock
bpf_cgroup_from_id() is basically a wrapper to cgroup_get_from_id(),
that is relying on kernfs to determine the right cgroup associated to
the target id.

As a kfunc, it has the potential to be attached to any function through
BPF, particularly in contexts where certain locks are held.

However, kernfs is not using an irq safe spinlock for kernfs_idr_lock,
that means any kernfs function that is acquiring this lock can be
interrupted and potentially hit bpf_cgroup_from_id() in the process,
triggering a deadlock.

For example, it is really easy to trigger a lockdep splat between
kernfs_idr_lock and rq->_lock, attaching a small BPF program to
__set_cpus_allowed_ptr_locked() that just calls bpf_cgroup_from_id():

 =====================================================
 WARNING: HARDIRQ-safe -> HARDIRQ-unsafe lock order detected
 6.7.0-rc7-virtme #5 Not tainted
 -----------------------------------------------------
 repro/131 [HC0[0]:SC0[0]:HE0:SE1] is trying to acquire:
 ffffffffb2dc4578 (kernfs_idr_lock){+.+.}-{2:2}, at: kernfs_find_and_get_node_by_id+0x1d/0x80

 and this task is already holding:
 ffff911cbecaf218 (&rq->__lock){-.-.}-{2:2}, at: task_rq_lock+0x50/0xc0
 which would create a new lock dependency:
  (&rq->__lock){-.-.}-{2:2} -> (kernfs_idr_lock){+.+.}-{2:2}

 but this new dependency connects a HARDIRQ-irq-safe lock:
  (&rq->__lock){-.-.}-{2:2}

 ... which became HARDIRQ-irq-safe at:
   lock_acquire+0xbf/0x2b0
   _raw_spin_lock_nested+0x2e/0x40
   scheduler_tick+0x5d/0x170
   update_process_times+0x9c/0xb0
   tick_periodic+0x27/0xe0
   tick_handle_periodic+0x24/0x70
   __sysvec_apic_timer_interrupt+0x64/0x1a0
   sysvec_apic_timer_interrupt+0x6f/0x80
   asm_sysvec_apic_timer_interrupt+0x1a/0x20
   memcpy+0xc/0x20
   arch_dup_task_struct+0x15/0x30
   copy_process+0x1ce/0x1eb0
   kernel_clone+0xac/0x390
   kernel_thread+0x6f/0xa0
   kthreadd+0x199/0x230
   ret_from_fork+0x31/0x50
   ret_from_fork_asm+0x1b/0x30

 to a HARDIRQ-irq-unsafe lock:
  (kernfs_idr_lock){+.+.}-{2:2}

 ... which became HARDIRQ-irq-unsafe at:
 ...
   lock_acquire+0xbf/0x2b0
   _raw_spin_lock+0x30/0x40
   __kernfs_new_node.isra.0+0x83/0x280
   kernfs_create_root+0xf6/0x1d0
   sysfs_init+0x1b/0x70
   mnt_init+0xd9/0x2a0
   vfs_caches_init+0xcf/0xe0
   start_kernel+0x58a/0x6a0
   x86_64_start_reservations+0x18/0x30
   x86_64_start_kernel+0xc5/0xe0
   secondary_startup_64_no_verify+0x178/0x17b

 other info that might help us debug this:

  Possible interrupt unsafe locking scenario:

        CPU0                    CPU1
        ----                    ----
   lock(kernfs_idr_lock);
                                local_irq_disable();
                                lock(&rq->__lock);
                                lock(kernfs_idr_lock);
   <Interrupt>
     lock(&rq->__lock);

  *** DEADLOCK ***

Prevent this deadlock condition converting kernfs_idr_lock to a raw irq
safe spinlock.

The performance impact of this change should be negligible and it also
helps to prevent similar deadlock conditions with any other subsystems
that may depend on kernfs.

Fixes: 332ea1f697 ("bpf: Add bpf_cgroup_from_id() kfunc")
Cc: stable <stable@kernel.org>
Signed-off-by: Andrea Righi <andrea.righi@canonical.com>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20231229074916.53547-1-andrea.righi@canonical.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-01-04 17:13:15 +01:00
Jing Xia
93ec4a3b76 class: fix use-after-free in class_register()
The lock_class_key is still registered and can be found in
lock_keys_hash hlist after subsys_private is freed in error
handler path.A task who iterate over the lock_keys_hash
later may cause use-after-free.So fix that up and unregister
the lock_class_key before kfree(cp).

On our platform, a driver fails to kset_register because of
creating duplicate filename '/class/xxx'.With Kasan enabled,
it prints a invalid-access bug report.

KASAN bug report:

BUG: KASAN: invalid-access in lockdep_register_key+0x19c/0x1bc
Write of size 8 at addr 15ffff808b8c0368 by task modprobe/252
Pointer tag: [15], memory tag: [fe]

CPU: 7 PID: 252 Comm: modprobe Tainted: G        W
 6.6.0-mainline-maybe-dirty #1

Call trace:
dump_backtrace+0x1b0/0x1e4
show_stack+0x2c/0x40
dump_stack_lvl+0xac/0xe0
print_report+0x18c/0x4d8
kasan_report+0xe8/0x148
__hwasan_store8_noabort+0x88/0x98
lockdep_register_key+0x19c/0x1bc
class_register+0x94/0x1ec
init_module+0xbc/0xf48 [rfkill]
do_one_initcall+0x17c/0x72c
do_init_module+0x19c/0x3f8
...
Memory state around the buggy address:
ffffff808b8c0100: 8a 8a 8a 8a 8a 8a 8a 8a 8a 8a 8a 8a 8a 8a 8a 8a
ffffff808b8c0200: 8a 8a 8a 8a 8a 8a 8a 8a fe fe fe fe fe fe fe fe
>ffffff808b8c0300: fe fe fe fe fe fe fe fe fe fe fe fe fe fe fe fe
                                     ^
ffffff808b8c0400: 03 03 03 03 03 03 03 03 03 03 03 03 03 03 03 03

As CONFIG_KASAN_GENERIC is not set, Kasan reports invalid-access
not use-after-free here.In this case, modprobe is manipulating
the corrupted lock_keys_hash hlish where lock_class_key is already
freed before.

It's worth noting that this only can happen if lockdep is enabled,
which is not true for normal system.

Fixes: dcfbb67e48 ("driver core: class: use lock_class_key already present in struct subsys_private")
Cc: stable <stable@kernel.org>
Signed-off-by: Jing Xia <jing.xia@unisoc.com>
Signed-off-by: Xuewen Yan <xuewen.yan@unisoc.com>
Link: https://lore.kernel.org/r/20231220024603.186078-1-jing.xia@unisoc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-01-04 17:13:04 +01:00
Quentin Schulz
056a9965e5 drm/panel: ltk050h3146w: use dev_err_probe wherever possible
This is only a cosmetic change.

This replaces a hand-crafted EPROBE_DEFER handling for deciding to print
an error message with dev_err_probe.

A side-effect is that dev_err_probe also adds a debug message when it's
not EPROBE_DEFER, but this is seen as an improvement.

Cc: Quentin Schulz <foss+kernel@0leil.net>
Signed-off-by: Quentin Schulz <quentin.schulz@theobroma-systems.com>
Reviewed-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20240104-ltk-dev_err_probe-v1-2-8ef3c0b585d8@theobroma-systems.com
2024-01-04 17:07:34 +01:00
Quentin Schulz
65afd91e8d drm/panel: ltk050h3146w: only print message when GPIO getting is not EPROBE_DEFER
devm_gpiod_get_optional may return EPROBE_DEFER in case the GPIO
controller isn't yet probed when the panel driver is being probed.

In that case, a spurious and confusing error message about not being
able to get the reset GPIO is printed even though later on the device
actually manages to get probed.

Use dev_err_probe instead so that the message is only printed when it
truly matters.

Cc: Quentin Schulz <foss+kernel@0leil.net>
Signed-off-by: Quentin Schulz <quentin.schulz@theobroma-systems.com>
Reviewed-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20240104-ltk-dev_err_probe-v1-1-8ef3c0b585d8@theobroma-systems.com
2024-01-04 17:07:33 +01:00
Guanghui Feng
0c9ae0b860 uio: Fix use-after-free in uio_open
core-1				core-2
-------------------------------------------------------
uio_unregister_device		uio_open
				idev = idr_find()
device_unregister(&idev->dev)
put_device(&idev->dev)
uio_device_release
				get_device(&idev->dev)
kfree(idev)
uio_free_minor(minor)
				uio_release
				put_device(&idev->dev)
				kfree(idev)
-------------------------------------------------------

In the core-1 uio_unregister_device(), the device_unregister will kfree
idev when the idev->dev kobject ref is 1. But after core-1
device_unregister, put_device and before doing kfree, the core-2 may
get_device. Then:
1. After core-1 kfree idev, the core-2 will do use-after-free for idev.
2. When core-2 do uio_release and put_device, the idev will be double
   freed.

To address this issue, we can get idev atomic & inc idev reference with
minor_lock.

Fixes: 57c5f4df0a ("uio: fix crash after the device is unregistered")
Cc: stable <stable@kernel.org>
Signed-off-by: Guanghui Feng <guanghuifeng@linux.alibaba.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Link: https://lore.kernel.org/r/1703152663-59949-1-git-send-email-guanghuifeng@linux.alibaba.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-01-04 17:03:47 +01:00
Jay Buddhabhatti
97d62760e4 drivers: soc: xilinx: add check for platform
Some error event IDs for Versal and Versal NET are different.
Both the platforms should access their respective error event
IDs so use sub_family_code to check for platform and check
error IDs for respective platforms. The family code is passed
via platform data to avoid platform detection again.
Platform data is setup when even driver is registered.

Signed-off-by: Jay Buddhabhatti <jay.buddhabhatti@amd.com>
Link: https://lore.kernel.org/r/20231219055025.27570-3-jay.buddhabhatti@amd.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-01-04 17:02:49 +01:00
Jay Buddhabhatti
0c4b2255b7 firmware: xilinx: Export function to use in other module
Export zynqmp_pm_get_family_info() to access and find family information
in other module.

Signed-off-by: Jay Buddhabhatti <jay.buddhabhatti@amd.com>
Link: https://lore.kernel.org/r/20231219055025.27570-2-jay.buddhabhatti@amd.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-01-04 17:02:49 +01:00
Wei Yang
2ad3cc0582 scripts/tags.sh: remove find_sources
After commit '4f628248a5 kbuild: reintroduce ALLSOURCE_ARCHS support for
tags/cscope', find_sources only invoke find_arch_sources.

Signed-off-by: Wei Yang <richard.weiyang@gmail.com>
CC: Jike Song <albcamus@gmail.com>
Link: https://lore.kernel.org/r/20231229030654.17474-4-richard.weiyang@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-01-04 17:01:15 +01:00
Wei Yang
d70a091fb4 scripts/tags.sh: use -n to test archinclude
In bash, "! -z" is equivalent to "-n", which seems to be more intuitive.

Signed-off-by: Wei Yang <richard.weiyang@gmail.com>
CC: Sam Ravnborg <sam@ravnborg.org>
Link: https://lore.kernel.org/r/20231229030654.17474-3-richard.weiyang@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-01-04 17:01:15 +01:00
Wei Yang
0aedf7a2dc scripts/tags.sh: add local annotation
Commit 'f81b1be40c tags: include headers before source files'
introduce two local variables.

Let's add local annotation to make it obvious.

Signed-off-by: Wei Yang <richard.weiyang@gmail.com>
Link: https://lore.kernel.org/r/20231229030654.17474-2-richard.weiyang@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-01-04 17:01:15 +01:00
Wei Yang
f9fefa985d scripts/tags.sh: use more portable -path instead of -wholename
According to the manual, -path is more portable than -wholename. Also
for consistency, let's use -path here.

Signed-off-by: Wei Yang <richard.weiyang@gmail.com>
CC: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
CC: WANG Cong <xiyou.wangcong@gmail.com>
CC: Michal Marek <mmarek@suse.cz>
Link: https://lore.kernel.org/r/20231229030654.17474-1-richard.weiyang@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-01-04 17:01:15 +01:00
René Nyffenegger
4f3f263df5 scripts/tags.sh: Update comment (addition of gtags)
Commit f4ed1009fc ("kbuild: add GNU GLOBAL tags generation") added
support for the GNU Global source tagging system. However, this addition
was not reflected in the script's header comment.

Fixes: f4ed1009fc ("kbuild: add GNU GLOBAL tags generation")
Signed-off-by: René Nyffenegger <mail@renenyffenegger.ch>
Link: https://lore.kernel.org/r/20231217082719.4747-1-mail@renenyffenegger.ch
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-01-04 17:01:15 +01:00
Uwe Kleine-König
408201eb2e firmware: zynqmp: Convert to platform remove callback returning void
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.

To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().

Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/b5a82472a6d61608c2cd7728ca364f6c88a821c3.1703693980.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-01-04 17:01:15 +01:00
Uwe Kleine-König
31fd8f1ddd firmware: turris-mox-rwtm: Convert to platform remove callback returning void
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.

To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().

Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Marek Behún <kabel@kernel.org>
Link: https://lore.kernel.org/r/9074d1ad2e889425991fecad664781ae27b2418a.1703693980.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-01-04 17:01:15 +01:00
Uwe Kleine-König
51e24bac2f firmware: stratix10-svc: Convert to platform remove callback returning void
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.

To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().

Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Dinh Nguyen <dinguyen@kernel.org>
Link: https://lore.kernel.org/r/e574041cdce2e4e69f729dfa726a6d090762cff9.1703693980.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-01-04 17:01:15 +01:00
Uwe Kleine-König
6ac63d0bb5 firmware: stratix10-rsu: Convert to platform remove callback returning void
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.

To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().

Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Dinh Nguyen <dinguyen@kernel.org>
Link: https://lore.kernel.org/r/06df45c697a747cb6543800a4613db6e1f5462b4.1703693980.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-01-04 17:01:15 +01:00
Uwe Kleine-König
ffc3c92950 firmware: raspberrypi: Convert to platform remove callback returning void
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.

To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().

Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://lore.kernel.org/r/5df31ef3c069f45634631c9c639bbb60ab1d4798.1703693980.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-01-04 17:01:15 +01:00
Uwe Kleine-König
9eeec41226 firmware: qemu_fw_cfg: Convert to platform remove callback returning void
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.

To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().

Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Link: https://lore.kernel.org/r/8d7d86a24ea36985845c17b6da0933fedbf99ad8.1703693980.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-01-04 17:01:15 +01:00
Uwe Kleine-König
ab45e1f40b firmware: mtk-adsp-ipc: Convert to platform remove callback returning void
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.

To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().

Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/e2ea8abb4c30190392a86cf05cecd722d0f0b493.1703693980.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-01-04 17:01:14 +01:00
Uwe Kleine-König
303cbf2a30 firmware: imx-dsp: Convert to platform remove callback returning void
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.

To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().

Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/f4cc1ffe30b837d5eab96f2924f51999dfa9f671.1703693980.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-01-04 17:01:14 +01:00
Uwe Kleine-König
f69583d32f firmware: coreboot_table: Convert to platform remove callback returning void
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.

To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().

Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/d323e4f24bfab3ac1480933deb51e7c5cb025b09.1703693980.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-01-04 17:01:14 +01:00
Uwe Kleine-König
2595665037 firmware: arm_scpi: Convert to platform remove callback returning void
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.

To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().

Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/e7b4bc389949c3613a358bd8e57d70d7acd5552b.1703693980.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-01-04 17:01:14 +01:00
Uwe Kleine-König
927e11300d firmware: arm_scmi: Convert to platform remove callback returning void
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.

To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().

Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/86165c8ccd0bb47000a29e711102795b36c8df41.1703693980.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-01-04 17:01:14 +01:00
Andrew Davis
2765149273 mux: mmio: use reg property when parent device is not a syscon
The DT binding for the reg-mux compatible states it can be used when the
"parent device of mux controller is not syscon device". It also allows
for a reg property. When the reg property is provided, use that to
identify the address space for this mux. If not provided fallback to
using the parent device as a regmap provider.

While here use dev_err_probe() in the error path to prevent printing
a message on probe defer which now can happen in extra ways.

Signed-off-by: Andrew Davis <afd@ti.com>
Reviewed-by: Nishanth Menon <nm@ti.com>
Acked-by: Peter Rosin <peda@axentia.se>
Link: https://lore.kernel.org/r/20240104154552.17852-1-afd@ti.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-01-04 17:01:14 +01:00
Hans de Goede
b1b9f7a494 misc: lis3lv02d_i2c: Add missing setting of the reg_ctrl callback
The lis3lv02d_i2c driver was missing a line to set the lis3_dev's
reg_ctrl callback.

lis3_reg_ctrl(on) is called from the init callback, but due to
the missing reg_ctrl callback the regulators where never turned off
again leading to the following oops/backtrace when detaching the driver:

[   82.313527] ------------[ cut here ]------------
[   82.313546] WARNING: CPU: 1 PID: 1724 at drivers/regulator/core.c:2396 _regulator_put+0x219/0x230
...
[   82.313695] RIP: 0010:_regulator_put+0x219/0x230
...
[   82.314767] Call Trace:
[   82.314770]  <TASK>
[   82.314772]  ? _regulator_put+0x219/0x230
[   82.314777]  ? __warn+0x81/0x170
[   82.314784]  ? _regulator_put+0x219/0x230
[   82.314791]  ? report_bug+0x18d/0x1c0
[   82.314801]  ? handle_bug+0x3c/0x80
[   82.314806]  ? exc_invalid_op+0x13/0x60
[   82.314812]  ? asm_exc_invalid_op+0x16/0x20
[   82.314845]  ? _regulator_put+0x219/0x230
[   82.314857]  regulator_bulk_free+0x39/0x60
[   82.314865]  i2c_device_remove+0x22/0xb0

Add the missing setting of the callback so that the regulators
properly get turned off again when not used.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20231224183402.95640-1-hdegoede@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-01-04 17:01:14 +01:00
Andy Shevchenko
d3da61ea97 pvpanic: Kill duplicate PCI_VENDOR_ID_REDHAT definition
PCI_VENDOR_ID_REDHAT is already defined in pci_ids.h. Kill the dup.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://lore.kernel.org/r/20231221140921.2760432-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-01-04 17:01:14 +01:00
Greg Kroah-Hartman
e1be24b2e1 platform/surface: aggregator: make ssam_bus_type constant and static
Now that the driver core can properly handle constant struct bus_type,
move the ssam_bus_type variable to be a constant structure as well,
placing it into read-only memory which can not be modified at runtime.

It's also never used outside of
drivers/platform/surface/aggregator/bus.c so make it static and don't
export it as no one is using it.

Cc: Maximilian Luz <luzmaximilian@gmail.com>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Cc:  <platform-driver-x86@vger.kernel.org>
Reviewed-by: Maximilian Luz <luzmaximilian@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/2023121957-tapered-upswing-8326@gregkh
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-01-04 17:01:14 +01:00