Currently the SVA domain is a naked struct iommu_domain, allocate a struct
arm_smmu_domain instead.
This is necessary to be able to use the struct arm_master_domain
mechanism.
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Tested-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Reviewed-by: Michael Shavit <mshavit@google.com>
Reviewed-by: Nicolin Chen <nicolinc@nvidia.com>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/8-v9-5cd718286059+79186-smmuv3_newapi_p2b_jgg@nvidia.com
Signed-off-by: Will Deacon <will@kernel.org>
Allow creating and managing arm_smmu_mater_domain's with a non-zero SSID
through the arm_smmu_attach_*() family of functions. This triggers ATC
invalidation for the correct SSID in PASID cases and tracks the
per-attachment SSID in the struct arm_smmu_master_domain.
Generalize arm_smmu_attach_remove() to be able to remove SSID's as well by
ensuring the ATC for the PASID is flushed properly.
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Tested-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Reviewed-by: Nicolin Chen <nicolinc@nvidia.com>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/7-v9-5cd718286059+79186-smmuv3_newapi_p2b_jgg@nvidia.com
Signed-off-by: Will Deacon <will@kernel.org>
We no longer need a master->sva_enable to control what attaches are
allowed. Instead we can tell if the attach is legal based on the current
configuration of the master.
Keep track of the number of valid CD entries for SSID's in the cd_table
and if the cd_table has been installed in the STE directly so we know what
the configuration is.
The attach logic is then made into:
- SVA bind, check if the CD is installed
- RID attach of S2, block if SSIDs are used
- RID attach of IDENTITY/BLOCKING, block if SSIDs are used
arm_smmu_set_pasid() is already checking if it is possible to setup a CD
entry, at this patch it means the RID path already set a STE pointing at
the CD table.
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Reviewed-by: Nicolin Chen <nicolinc@nvidia.com>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/6-v9-5cd718286059+79186-smmuv3_newapi_p2b_jgg@nvidia.com
Signed-off-by: Will Deacon <will@kernel.org>
Prepare to allow a S1 domain to be attached to a PASID as well. Keep track
of the SSID the domain is using on each master in the
arm_smmu_master_domain.
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Tested-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Reviewed-by: Michael Shavit <mshavit@google.com>
Reviewed-by: Nicolin Chen <nicolinc@nvidia.com>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/5-v9-5cd718286059+79186-smmuv3_newapi_p2b_jgg@nvidia.com
Signed-off-by: Will Deacon <will@kernel.org>
The core code allows the domain to be changed on the fly without a forced
stop in BLOCKED/IDENTITY. In this flow the driver should just continually
maintain the ATS with no change while the STE is updated.
ATS relies on a linked list smmu_domain->devices to keep track of which
masters have the domain programmed, but this list is also used by
arm_smmu_share_asid(), unrelated to ats.
Create two new functions to encapsulate this combined logic:
arm_smmu_attach_prepare()
<caller generates and sets the STE>
arm_smmu_attach_commit()
The two functions can sequence both enabling ATS and disabling across
the STE store. Have every update of the STE use this sequence.
Installing a S1/S2 domain always enables the ATS if the PCIe device
supports it.
The enable flow is now ordered differently to allow it to be hitless:
1) Add the master to the new smmu_domain->devices list
2) Program the STE
3) Enable ATS at PCIe
4) Remove the master from the old smmu_domain
This flow ensures that invalidations to either domain will generate an ATC
invalidation to the device while the STE is being switched. Thus we don't
need to turn off the ATS anymore for correctness.
The disable flow is the reverse:
1) Disable ATS at PCIe
2) Program the STE
3) Invalidate the ATC
4) Remove the master from the old smmu_domain
Move the nr_ats_masters adjustments to be close to the list
manipulations. It is a count of the number of ATS enabled masters
currently in the list. This is stricly before and after the STE/CD are
revised, and done under the list's spin_lock.
This is part of the bigger picture to allow changing the RID domain while
a PASID is in use. If a SVA PASID is relying on ATS to function then
changing the RID domain cannot just temporarily toggle ATS off without
also wrecking the SVA PASID. The new infrastructure here is organized so
that the PASID attach/detach flows will make use of it as well in
following patches.
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Tested-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Reviewed-by: Nicolin Chen <nicolinc@nvidia.com>
Reviewed-by: Michael Shavit <mshavit@google.com>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/4-v9-5cd718286059+79186-smmuv3_newapi_p2b_jgg@nvidia.com
Signed-off-by: Will Deacon <will@kernel.org>
The next patch will need to store the same master twice (with different
SSIDs), so allocate memory for each list element.
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Tested-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Reviewed-by: Michael Shavit <mshavit@google.com>
Reviewed-by: Nicolin Chen <nicolinc@nvidia.com>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/3-v9-5cd718286059+79186-smmuv3_newapi_p2b_jgg@nvidia.com
Signed-off-by: Will Deacon <will@kernel.org>
Add arm_smmu_set_pasid()/arm_smmu_remove_pasid() which are to be used by
callers that already constructed the arm_smmu_cd they wish to program.
These functions will encapsulate the shared logic to setup a CD entry that
will be shared by SVA and S1 domain cases.
Prior fixes had already moved most of this logic up into
__arm_smmu_sva_bind(), move it to it's final home.
Following patches will relieve some of the remaining SVA restrictions:
- The RID domain is a S1 domain and has already setup the STE to point to
the CD table
- The programmed PASID is the mm_get_enqcmd_pasid()
- Nothing changes while SVA is running (sva_enable)
SVA invalidation will still iterate over the S1 domain's master list,
later patches will resolve that.
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Tested-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Reviewed-by: Nicolin Chen <nicolinc@nvidia.com>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/2-v9-5cd718286059+79186-smmuv3_newapi_p2b_jgg@nvidia.com
Signed-off-by: Will Deacon <will@kernel.org>
This allows the driver the receive the mm and always a device during
allocation. Later patches need this to properly setup the notifier when
the domain is first allocated.
Remove ops->domain_alloc() as SVA was the only remaining purpose.
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Tested-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Reviewed-by: Michael Shavit <mshavit@google.com>
Reviewed-by: Nicolin Chen <nicolinc@nvidia.com>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/1-v9-5cd718286059+79186-smmuv3_newapi_p2b_jgg@nvidia.com
Signed-off-by: Will Deacon <will@kernel.org>
When using MSI/INTx interrupt, the shared interrupts are still being
handled in the device remove routine, before free IRQs. So isb memory
is still read after it is freed. Thus move wx_free_isb_resources()
from txgbe_close() to txgbe_remove(). And fix the improper isb free
action in txgbe_open() error handling path.
Fixes: aefd013624 ("net: txgbe: use irq_domain for interrupt controller")
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Rename original txgbe_misc_irq_handle() to txgbe_misc_irq_thread_fn()
since it is the handle thread to wake up. And add the primary handler
to deal the case of MSI/INTx, because there is a schedule NAPI poll.
Fixes: aefd013624 ("net: txgbe: use irq_domain for interrupt controller")
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
When using MSI or INTx interrupts, request_irq() for pdev->irq will
conflict with request_threaded_irq() for txgbe->misc.irq, to cause
system crash. So remove txgbe_request_irq() for MSI/INTx case, and
rename txgbe_request_msix_irqs() since it only request for queue irqs.
Add wx->misc_irq_domain to determine whether the driver creates an IRQ
domain and threaded request the IRQs.
Fixes: aefd013624 ("net: txgbe: use irq_domain for interrupt controller")
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
When using MSI/INTx interrupts, wx->num_q_vectors is uninitialized.
Thus there will be kernel panic in wx_alloc_q_vectors() to allocate
queue vectors.
Fixes: 3f70318611 ("net: libwx: Add irq flow functions")
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add testcase where 7th argument is struct for architectures with 8 argument
registers, and increase the complexity of the struct.
Signed-off-by: Pu Lehui <pulehui@huawei.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Björn Töpel <bjorn@rivosinc.com>
Acked-by: Björn Töpel <bjorn@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/bpf/20240702121944.1091530-4-pulehui@huaweicloud.com
Factor out many args tests from tracing_struct and rename some function names
to make more sense. Meanwhile, remove unnecessary skeleton detach operation
as it will be covered by skeleton destroy operation.
Signed-off-by: Pu Lehui <pulehui@huawei.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/bpf/20240702121944.1091530-3-pulehui@huaweicloud.com
The global hci_hotkey_quickstart quirk flag is tested in
toshiba_acpi_enable_hotkeys() before the quirk flag is properly
initialized based on SMBIOS data. This causes the quirk to be
applied to all models, some of which behave erratically as a
result.
Fix this by initializing the global quirk flags during module
initialization before registering the ACPI driver. This also
allows us to mark toshiba_dmi_quirks[] as __initconst.
Fixes: 23f1d8b47d ("platform/x86: toshiba_acpi: Add quirk for buttons on Z830")
Reported-by: kemal <kmal@cock.li>
Closes: https://lore.kernel.org/platform-driver-x86/R4CYFS.TWB8QUU2SHWI1@cock.li/
Tested-by: kemal <kmal@cock.li>
Cc: stable@vger.kernel.org
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20240701194539.348937-1-W_Armin@gmx.de
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
The round-robin path selector is inefficient in cases where there is a
difference in latency between paths. In the presence of one or more
high latency paths the round-robin selector continues to use the high
latency path equally. This results in a bias towards the highest latency
path and can cause a significant decrease in overall performance as IOs
pile on the highest latency path. This problem is acute with NVMe-oF
controllers.
The queue-depth path selector sends I/O down the path with the lowest
number of requests in its request queue. Paths with lower latency will
clear requests more quickly and have less requests queued compared to
higher latency paths. The goal of this path selector is to make more use
of lower latency paths which will bring down overall IO latency and
increase throughput and performance.
Signed-off-by: Thomas Song <tsong@purestorage.com>
[emilne: commandeered patch developed by Thomas Song @ Pure Storage]
Co-developed-by: Ewan D. Milne <emilne@redhat.com>
Signed-off-by: Ewan D. Milne <emilne@redhat.com>
Co-developed-by: John Meneghini <jmeneghi@redhat.com>
Signed-off-by: John Meneghini <jmeneghi@redhat.com>
Link: https://lore.kernel.org/linux-nvme/20240509202929.831680-1-jmeneghi@redhat.com/
Tested-by: Marco Patalano <mpatalan@redhat.com>
Tested-by: Jyoti Rani <jrani@purestorage.com>
Tested-by: John Meneghini <jmeneghi@redhat.com>
Reviewed-by: Randy Jennings <randyj@purestorage.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Christophe Roullier says:
====================
Fixes for stm32-dwmac driver fails to probe
Mark Brown found issue during stm32-dwmac probe:
For the past few days networking has been broken on the Avenger 96, a
stm32mp157a based platform. The stm32-dwmac driver fails to probe:
<6>[ 1.894271] stm32-dwmac 5800a000.ethernet: IRQ eth_wake_irq not found
<6>[ 1.899694] stm32-dwmac 5800a000.ethernet: IRQ eth_lpi not found
<6>[ 1.905849] stm32-dwmac 5800a000.ethernet: IRQ sfty not found
<3>[ 1.912304] stm32-dwmac 5800a000.ethernet: Unable to parse OF data
<3>[ 1.918393] stm32-dwmac 5800a000.ethernet: probe with driver stm32-dwmac failed with error -75
which looks a bit odd given the commit contents but I didn't look at the
driver code at all.
Full boot log here:
https://lava.sirena.org.uk/scheduler/job/467150
A working equivalent is here:
https://lava.sirena.org.uk/scheduler/job/466518
I delivered 2 fixes to solve issue.
====================
Link: https://patch.msgid.link/20240701064838.425521-1-christophe.roullier@foss.st.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The mask parameter of syscfg property is mandatory for MP13 but
optional for all other cases.
The function should not return error code because for non-MP13
the missing syscfg phandle in DT is not considered an error.
So reset err to 0 in that case to support existing DTs without
syscfg phandle.
Fixes: 50bbc03931 ("net: stmmac: dwmac-stm32: add management of stm32mp13 for stm32")
Signed-off-by: Christophe Roullier <christophe.roullier@foss.st.com>
Reviewed-by: Marek Vasut <marex@denx.de>
Tested-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
When we want to use clock from RCC to clock Ethernet PHY (with ETHCK)
we need to check if value of clock rate is authorized.
If ETHCK is unused, the ETHCK frequency is 0Hz and validation fails.
It makes no sense to validate unused ETHCK, so skip the validation.
Fixes: 582ac13496 ("net: stmmac: dwmac-stm32: Separate out external clock rate validation")
Signed-off-by: Christophe Roullier <christophe.roullier@foss.st.com>
Reviewed-by: Marek Vasut <marex@denx.de>
Tested-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Correct member @num_por with size of right array @emac_v4_0_0_por for
struct ethqos_emac_driver_data @emac_v4_0_0_data.
Cc: stable@vger.kernel.org
Fixes: 8c4d92e82d ("net: stmmac: dwmac-qcom-ethqos: add support for emac4 on sa8775p platforms")
Signed-off-by: Yijie Yang <quic_yijiyang@quicinc.com>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://patch.msgid.link/20240701014720.2547856-1-quic_yijiyang@quicinc.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Indeed the maximum DMA burst length can be programmed not only for DW
xGMACs, Allwinner EMACs and Spear SoC GMAC, but in accordance with
[1, 2, 3] for Generic DW *MAC IP-cores. Moreover the STMMAC driver parses
the property and then apply the configuration for all supported DW MAC
devices. All of that makes the property being available for all IP-cores
the bindings supports. Let's make sure the PBL-related properties are
validated for all of them by the common DW *MAC DT schema.
[1] DesignWare Cores Ethernet MAC Universal Databook, Revision 3.73a,
October 2013, p.378.
[2] DesignWare Cores Ethernet Quality-of-Service Databook, Revision 5.10a,
December 2017, p.1223.
[3] DesignWare Cores XGMAC - 10G Ethernet MAC Databook, Revision 2.11a,
September 2015, p.469-473.
Signed-off-by: Serge Semin <fancer.lancer@gmail.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20240628154515.8783-1-fancer.lancer@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Code used to create standalone and widget enum control is same, with
exception that in standalone case dynamic object needs to be registered
and control created directly.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Link: https://patch.msgid.link/20240627101850.2191513-14-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Code used to create standalone and widget mixer control is same, with
exception that in standalone case dynamic object needs to be registered
and control created directly.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Link: https://patch.msgid.link/20240627101850.2191513-13-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Code used to create standalone and widget bytes control is same, with
exception that in standalone case dynamic object needs to be registered
and control created directly.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Link: https://patch.msgid.link/20240627101850.2191513-12-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
soc_tplg_dbytes_create() missed se->dobj.index initialization, so add it
there. Additionally separate dynamic object initialization into separate
logical block code.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Link: https://patch.msgid.link/20240627101850.2191513-9-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Sebastian Andrzej Siewior says:
====================
net: bpf_net_context cleanups.
a small series with bpf_net_context cleanups/ improvements.
Jakub asked for #1 and #2 and while looking around I made #3.
====================
Link: https://patch.msgid.link/20240628103020.1766241-1-bigeasy@linutronix.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Widget kcontrols do not need to be managed as topology dynamic objects
with an index and a linked list. As they are always associated with a
widget which is already a topology dynamic object, thus all
addition/removals of a widget will by design manage the kcontrol.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Link: https://patch.msgid.link/20240627101850.2191513-3-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The bpf_net_ctx_get_.*_flush_list() are used at the top of the function.
This means the variable is always assigned even if unused. By moving the
function to where it is used, it is possible to delay the initialisation
until it is unavoidable.
Not sure how much this gains in reality but by looking at bq_enqueue()
(in devmap.c) gcc pushes one register less to the stack. \o/.
Move flush list retrieval to where it is used.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Acked-by: Jesper Dangaard Brouer <hawk@kernel.org>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Instead of using goto, when there is no controls, just do a loop when
there are. Overall the check seems to be a bit redundant as
num_kcontrols will only be above 0 if kcontrols are set anyway, but
let's keep it, while simplifying code.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Link: https://patch.msgid.link/20240627101850.2191513-2-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Every NIC driver utilizing XDP should invoke xdp_do_flush() after
processing all packages. With the introduction of the bpf_net_context
logic the flush lists (for dev, CPU-map and xsk) are lazy initialized
only if used. However xdp_do_flush() tries to flush all three of them so
all three lists are always initialized and the likely empty lists are
"iterated".
Without the usage of XDP but with CONFIG_DEBUG_NET the lists are also
initialized due to xdp_do_check_flushed().
Jakub suggest to utilize the hints in bpf_net_context and avoid invoking
the flush function. This will also avoiding initializing the lists which
are otherwise unused.
Introduce bpf_net_ctx_get_all_used_flush_lists() to return the
individual list if not-empty. Use the logic in xdp_do_flush() and
xdp_do_check_flushed(). Remove the not needed .*_check_flush().
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
There is no clone() invocation within a bpf_net_ctx_…() block. Therefore
the task_struct::bpf_net_context has always to be NULL and an explicit
initialisation is not required.
Remove the NULL assignment in the clone() path.
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Introduce Tx-Rx detection Time and Rx AEQ training mappings to
phy-airoha-pcie driver. This is a preliminary patch to introduce PCIe
support to En7581 SoC through the mediatek-gen3 PCIe driver.
This change is not introducing any backward compatibility issue since
the EN7581 dts is not upstream yet.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/edf3b28926177166c65256604d69f2f576cb6fb3.1719682943.git.lorenzo@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Introduce Tx-Rx detection time and Rx AEQ mappings in Airoha EN7581
PCIe-PHY binding. This change is not introducing any backward compatibility
issue since the EN7581 dts is not upstream yet.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/a018329ff9678f3360bc6381294f95c62d34f3e3.1719682943.git.lorenzo@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Add support for the Exynos USB 3.1 DRD combo phy, as found in Exynos 9
SoCs like Google GS101. It supports USB SS, HS and DisplayPort.
In terms of UTMI+, this is very similar to the existing Exynos850
support in this driver. The difference is that this combo phy supports
both UTMI+ (HS) and PIPE3 (SS). It also supports DP alt mode.
The number of ports for UTMI+ and PIPE3 can be determined using the
LINKPORT register (which also exists on Exynos E850).
For SuperSpeed (SS) a new SS phy is in use and its PIPE3 interface is
new compared to Exynos E850, and also very different from the existing
support for older Exynos SoCs in this driver.
The SS phy needs a bit more configuration work and register tuning for
signal quality to work reliably, presumably due to the higher
frequency, e.g. to account for different board layouts. Additionally,
power needs to be enabled before writing to the SS phy registers.
This commit adds the necessary changes for USB HS and SS to work.
DisplayPort is out of scope in this commit.
Notes:
* For the register tuning, exynos5_usbdrd_apply_phy_tunes() has been
added with the appropriate data structures to support tuning at
various stages during initialisation. Since these are hardware
specific, the platform data is supposed to be populated accordingly.
The implementation is loosely modelled after the Samsung UFS PHY
driver.
There is one tuning state for UTMI+, PTS_UTMI_POSTINIT, to execute
after init and generally intended for HS signal tuning, as done in
this commit.
PTS_PIPE3_PREINIT PTS_PIPE3_INIT PTS_PIPE3_POSTINIT
PTS_PIPE3_POSTLOCK are tuning states for PIPE3. In the downstream
driver, preinit differs by Exynos SoC, and postinit and postlock
are different per board. The latter haven't been implemented for
gs101 here, because downstream doesn't use them on gs101 either.
* Signal lock acquisition for SS depends on the orientation of the
USB-C plug. Since there currently is no infrastructure to chain
connector events to both the USB DWC3 driver and this phy driver, a
work-around has been added in
exynos5_usbdrd_usbdp_g2_v4_pma_check_cdr_lock() to check both
registers if it failed in one of the orientations.
* Equally, we can only establish SS speed in one of the connector
orientations due to programming differences when selecting the lane
mux in exynos5_usbdrd_usbdp_g2_v4_pma_lane_mux_sel(), which really
needs to be dynamic, based on the orientation of the connector.
* As is, we can establish a HS link using any cable, and an SS link in
one orientation of the plug, falling back to HS if the orientation is
reversed to the expectation.
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Reviewed-by: Peter Griffin <peter.griffin@linaro.org>
Tested-by: Peter Griffin <peter.griffin@linaro.org>
Tested-by: Will McVicker <willmcvicker@google.com>
Link: https://lore.kernel.org/r/20240617-usb-phy-gs101-v3-6-b66de9ae7424@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Using the regulator_bulk APIs, the handling of power supplies becomes
much simpler. There is no need anymore to check if regulators have been
acquired or not, the bulk APIs will do all the work for us. We can also
drop the various handles to the individual power supplies in the driver
runtime data and instead simply treat them all as one thing. Error
cleanup also becomes much simpler.
Converting to the regulator_bulk APIs also makes it easier to add
support for those SoCs that have additional power supplies for the PHY.
Google Tensor gs101 is one example of such a SoC. Otherwise we'd have
to add all additional supplies individually via individual calls to
regulator_get() and enable/disable handle them all individually,
including complicated error handling. That doesn't scale and clutters
the code.
Just update the code to use the regulator_bulk APIs.
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Tested-by: Will McVicker <willmcvicker@google.com>
Reviewed-by: Peter Griffin <peter.griffin@linaro.org>
Tested-by: Peter Griffin <peter.griffin@linaro.org>
Link: https://lore.kernel.org/r/20240617-usb-phy-gs101-v3-5-b66de9ae7424@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
In preparation for support for additional platforms, convert the phy
register access clock to using the clk_bulk interfaces.
Newer SoCs like Google Tensor gs101 require additional clocks for
access to additional (different) register areas (PHY, PMA, PCS), and
converting to clk_bulk simplifies addition of those extra clocks.
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Reviewed-by: Peter Griffin <peter.griffin@linaro.org>
Tested-by: Peter Griffin <peter.griffin@linaro.org>
Tested-by: Will McVicker <willmcvicker@google.com>
Link: https://lore.kernel.org/r/20240617-usb-phy-gs101-v3-4-b66de9ae7424@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
