Size of the virtchnl2_rss_key struct should be 7 bytes but the
compiler introduces a padding byte for the structure alignment.
This results in idpf sending an additional byte of memory to the device
control plane than the expected buffer size. As the control plane
enforces virtchnl message size checks to validate the message,
set RSS key message fails resulting in the driver load failure.
Remove implicit compiler padding by using "__packed" structure
attribute for the virtchnl2_rss_key struct.
Also there is no need to use __DECLARE_FLEX_ARRAY macro for the
'key_flex' struct field. So drop it.
Fixes: 0d7502a9b4 ("virtchnl: add virtchnl version 2 ops")
Reviewed-by: Larysa Zaremba <larysa.zaremba@intel.com>
Signed-off-by: Pavan Kumar Linga <pavan.kumar.linga@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Scott Register <scott.register@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
idpf_ring::skb serves only for keeping an incomplete frame between
several NAPI Rx polling cycles, as one cycle may end up before
processing the end of packet descriptor. The pointer is taken from
the ring onto the stack before entering the loop and gets written
there after the loop exits. When inside the loop, only the onstack
pointer is used.
For some reason, the logics is broken in the singleq mode, where the
pointer is taken from the ring each iteration. This means that if a
frame got fragmented into several descriptors, each fragment will have
its own skb, but only the last one will be passed up the stack
(containing garbage), leaving the rest leaked.
Then, on ifdown, rxq::skb is being freed only in the splitq mode, while
it can point to a valid skb in singleq as well. This can lead to a yet
another skb leak.
Just don't touch the ring skb field inside the polling loop, letting
the onstack skb pointer work as expected: build a new skb if it's the
first frame descriptor and attach a frag otherwise. On ifdown, free
rxq::skb unconditionally if the pointer is non-NULL.
Fixes: a5ab9ee0df ("idpf: add singleq start_xmit and napi poll")
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Michal Kubiak <michal.kubiak@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Tested-by: Scott Register <scott.register@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Use the queue wide write back cache tracking insted of duplicating the
value in strut rq_wb.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20231226090747.204969-1-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
submit_bio_noacct allows completely invalid operations, or operations
that are not supported in the bio path. Extent the existing switch
statement to rejcect all invalid types.
Move the code point for REQ_OP_ZONE_APPEND so that it's not right in the
middle of the zone management operations and the switch statement can
follow the numerical order of the operations.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20231221070538.1112446-1-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
For the QUEUE_FLAG_HW_WC to actually work, it needs to have a separate
number from QUEUE_FLAG_FUA, doh.
Fixes: 43c9835b14 ("block: don't allow enabling a cache on devices that don't support it")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20231226081524.180289-1-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Remove the @of_xlate: lines to prevent the kernel-doc warning:
include/linux/iio/iio.h:534: warning: Excess struct member 'of_xlate' description in 'iio_info'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Jonathan Cameron <jic23@kernel.org>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: linux-iio@vger.kernel.org
Link: https://lore.kernel.org/r/20231223050556.13948-1-rdunlap@infradead.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
AD7091R-5 and AD7091R-2/-4/-8 have slightly different register field
layout and due to that require different masks for getting the index of
the channel associated with each read.
Add a callback function so the base driver can get correct channel ID
for each chip variant.
Signed-off-by: Marcelo Schmitt <marcelo.schmitt@analog.com>
Link: https://lore.kernel.org/r/1f7a40b4839b3a1c3f1a0654a1b329bea870feb6.1703013352.git.marcelo.schmitt1@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
AD7091R-5 devices have a few modes of operation (sample, command,
autocycle) which are set by writing to configuration register fields.
Follow up patches will add support for AD7091R-2/-4/-8 which don't have
those operation modes nor the register fields for setting them.
Make ad7091r_set_mode() a callback function of AD7091R chip_info struct
so the base driver can appropriately handle each design without having
to check which actual chip is connected.
Signed-off-by: Marcelo Schmitt <marcelo.schmitt@analog.com>
Link: https://lore.kernel.org/r/5140336980f66c2c45f05895c3b68e2f65fba1c2.1703013352.git.marcelo.schmitt1@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
With the grouping of ad7091r initialization data and callbacks into the
init_info struct, there is no more need to pass the device name and
register map through probe function parameters as those will be available
in the init_info object.
Remove probe parameters that are not needed anymore.
Signed-off-by: Marcelo Schmitt <marcelo.schmitt@analog.com>
Link: https://lore.kernel.org/r/090a6b461410a374511a8c73659de28b2665f96b.1703013352.git.marcelo.schmitt1@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
AD7091R designs may differ on their communication protocol and resources
required for proper setup. Extract what is design specific into a
init_info struct so the base driver can use data and callback functions
from that struct rather than checking which specific chip is connected
during device initialization.
Signed-off-by: Marcelo Schmitt <marcelo.schmitt@analog.com>
Link: https://lore.kernel.org/r/1aca2261e227474dc58ce26442845947bcde9b14.1703013352.git.marcelo.schmitt1@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Some code generic to AD7091R devices such as channel definitions were in
the AD7091R-5 driver. There was also some generic register definitions
declared in the base driver which would make more sense to be in the
header file.
The device state struct will be needed for the ad7091r8 driver in a
follow up patch so that ought to be moved to the header file as well.
Lastly, a couple of regmap callback functions are also capable of
abstracting characteristics of different AD7091R devices and those are
now being exported to IIO_AD7091R name space.
Move AD7091R generic code either to the base driver or to the header
file so both the ad7091r5 and the ad7091r8 driver can use those
declaration in follow up patches.
Signed-off-by: Marcelo Schmitt <marcelo.schmitt@analog.com>
Link: https://lore.kernel.org/r/6376fc523ee503d47ec499e2cd2ef13bfb5fd8ba.1703013352.git.marcelo.schmitt1@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The ADC needs a voltage reference to work correctly.
Users can provide an external voltage reference or use the chip internal
reference to operate the ADC.
The availability of an in chip reference for the ADC saves the user from
having to supply an external voltage reference, which makes the external
reference an optional property as described in the device tree
documentation.
Though, to use the internal reference, it must be enabled by writing to
the configuration register.
Enable AD7091R internal voltage reference if no external vref is supplied.
Fixes: 260442cc5b ("iio: adc: ad7091r5: Add scale and external VREF support")
Signed-off-by: Marcelo Schmitt <marcelo.schmitt@analog.com>
Link: https://lore.kernel.org/r/b865033fa6a4fc4bf2b4a98ec51a6144e0f64f77.1703013352.git.marcelo.schmitt1@gmail.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
AD7091R-5 devices are supported by the ad7091r-5 driver together with
the ad7091r-base driver. Those drivers declared iio events for notifying
user space when ADC readings fall bellow the thresholds of low limit
registers or above the values set in high limit registers.
However, to configure iio events and their thresholds, a set of callback
functions must be implemented and those were not present until now.
The consequence of trying to configure ad7091r-5 events without the
proper callback functions was a null pointer dereference in the kernel
because the pointers to the callback functions were not set.
Implement event configuration callbacks allowing users to read/write
event thresholds and enable/disable event generation.
Since the event spec structs are generic to AD7091R devices, also move
those from the ad7091r-5 driver the base driver so they can be reused
when support for ad7091r-2/-4/-8 be added.
Fixes: ca69300173 ("iio: adc: Add support for AD7091R5 ADC")
Suggested-by: David Lechner <dlechner@baylibre.com>
Signed-off-by: Marcelo Schmitt <marcelo.schmitt@analog.com>
Link: https://lore.kernel.org/r/59552d3548dabd56adc3107b7b4869afee2b0c3c.1703013352.git.marcelo.schmitt1@gmail.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Drop one kernel-doc comment to prevent a warning:
iscsi_iser.h:313: warning: Excess struct member 'mr' description in 'iser_device'
and spell 2 words correctly (buffer and deferred).
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Sagi Grimberg <sagi@grimberg.me>
Cc: Max Gurtovoy <mgurtovoy@nvidia.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: Leon Romanovsky <leonro@nvidia.com>
Cc: linux-rdma@vger.kernel.org
Link: https://lore.kernel.org/r/20231222234623.25231-1-rdunlap@infradead.org
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Acked-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
A couple of bugfixes: one for a regression.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmWJgx4PHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRpGDwH+gMIAqB3Zvyps9EILCWRMkqnu33X0TQ4IcNo
P8pELD/YeuBo27dBRIAuITvtBr8UB6Yo0DYswQilN2hD9mQJ31Ky8gBTxDF7ZKdX
wz3kXUOGMYWJvmLet0+/Z+h3+4IZPw7x4pTA8aILHIVTAloICr3v9lejlnDxliow
AiermjEr8DhchEArgolWTTHRkpSqxMfnCqT/D+z+sB//kPH8iiHX0H2lgA1q2Nl2
mHsarYuOn/FWdeCz3wrifR9SGWFxEcs2LjMyXGb4LdgYtjpyPWLimTHVZma0KWws
aiyxGwjim7EgBgNDVD/W++CZnp893aPH/VXN2q2KZq+JiOhhbRg=
=Xffz
-----END PGP SIGNATURE-----
Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost
Pull virtio fixes from Michael Tsirkin:
"A couple of bugfixes: one for a regression"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
virtio_blk: fix snprintf truncation compiler warning
virtio_ring: fix syncs DMA memory with different direction
After a successful vp_legacy_probe() call, vp_legacy_remove() should be
called in the error handling path, as already done in the remove function.
Add the missing call.
Fixes: e85087beed ("eni_vdpa: add vDPA driver for Alibaba ENI")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Message-Id: <a7b0ef1eabd081f1c7c894e9b11de01678e85dee.1666293559.git.christophe.jaillet@wanadoo.fr>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
@ 2023-12-19 17:49 Siddh Raman Pant
2023-12-19 17:49 ` [PATCH net-next v7 1/2] nfc: llcp_core: Hold a ref to llcp_local->dev when holding a ref to llcp_local Siddh Raman Pant
2023-12-19 17:49 ` [PATCH net-next v7 2/2] nfc: Do not send datagram if socket state isn't LLCP_BOUND Siddh Raman Pant
0 siblings, 2 replies; 4+ messages in thread
Siddh Raman Pant says:
====================
[PATCH net-next v7 0/2] nfc: Fix UAF during datagram sending caused by missing refcounting
Changes in v7:
- Stupidly reverted ordering in recv() too, fix that.
- Remove redundant call to nfc_llcp_sock_free().
Changes in v6:
- Revert label introduction from v4, and thus also v5 entirely.
Changes in v5:
- Move reason = LLCP_DM_REJ under the fail_put_sock label.
- Checkpatch now warns about == NULL check for new_sk, so fix that,
and also at other similar places in the same function.
Changes in v4:
- Fix put ordering and comments.
- Separate freeing in recv() into end labels.
- Remove obvious comment and add reasoning.
- Picked up r-bs by Suman.
Changes in v3:
- Fix missing freeing statements.
Changes in v2:
- Add net-next in patch subject.
- Removed unnecessary extra lock and hold nfc_dev ref when holding llcp_sock.
- Remove last formatting patch.
- Picked up r-b from Krzysztof for LLCP_BOUND patch.
---
For connectionless transmission, llcp_sock_sendmsg() codepath will
eventually call nfc_alloc_send_skb() which takes in an nfc_dev as
an argument for calculating the total size for skb allocation.
virtual_ncidev_close() codepath eventually releases socket by calling
nfc_llcp_socket_release() (which sets the sk->sk_state to LLCP_CLOSED)
and afterwards the nfc_dev will be eventually freed.
When an ndev gets freed, llcp_sock_sendmsg() will result in an
use-after-free as it
(1) doesn't have any checks in place for avoiding the datagram sending.
(2) calls nfc_llcp_send_ui_frame(), which also has a do-while loop
which can race with freeing. This loop contains the call to
nfc_alloc_send_skb() where we dereference the nfc_dev pointer.
nfc_dev is being freed because we do not hold a reference to it when
we hold a reference to llcp_local. Thus, virtual_ncidev_close()
eventually calls nfc_release() due to refcount going to 0.
Since state has to be LLCP_BOUND for datagram sending, we can bail out
early in llcp_sock_sendmsg().
Please review and let me know if any errors are there, and hopefully
this gets accepted.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
As we know we cannot send the datagram (state can be set to LLCP_CLOSED
by nfc_llcp_socket_release()), there is no need to proceed further.
Thus, bail out early from llcp_sock_sendmsg().
Signed-off-by: Siddh Raman Pant <code@siddh.me>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Suman Ghosh <sumang@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
llcp_sock_sendmsg() calls nfc_llcp_send_ui_frame() which in turn calls
nfc_alloc_send_skb(), which accesses the nfc_dev from the llcp_sock for
getting the headroom and tailroom needed for skb allocation.
Parallelly the nfc_dev can be freed, as the refcount is decreased via
nfc_free_device(), leading to a UAF reported by Syzkaller, which can
be summarized as follows:
(1) llcp_sock_sendmsg() -> nfc_llcp_send_ui_frame()
-> nfc_alloc_send_skb() -> Dereference *nfc_dev
(2) virtual_ncidev_close() -> nci_free_device() -> nfc_free_device()
-> put_device() -> nfc_release() -> Free *nfc_dev
When a reference to llcp_local is acquired, we do not acquire the same
for the nfc_dev. This leads to freeing even when the llcp_local is in
use, and this is the case with the UAF described above too.
Thus, when we acquire a reference to llcp_local, we should acquire a
reference to nfc_dev, and release the references appropriately later.
References for llcp_local is initialized in nfc_llcp_register_device()
(which is called by nfc_register_device()). Thus, we should acquire a
reference to nfc_dev there.
nfc_unregister_device() calls nfc_llcp_unregister_device() which in
turn calls nfc_llcp_local_put(). Thus, the reference to nfc_dev is
appropriately released later.
Reported-and-tested-by: syzbot+bbe84a4010eeea00982d@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=bbe84a4010eeea00982d
Fixes: c7aa12252f ("NFC: Take a reference on the LLCP local pointer when creating a socket")
Reviewed-by: Suman Ghosh <sumang@marvell.com>
Signed-off-by: Siddh Raman Pant <code@siddh.me>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit 2f3ce7a56c ("net: sfp: rework the RollBall PHY waiting code")
changed the long wait before accessing RollBall / FS modules into
probing for PHY every 1 second, and trying 25 times.
Wei Lei reports that this does not work correctly on FS modules: when
initializing, they may report values different from 0xffff in PHY ID
registers for some MMDs, causing get_phy_c45_ids() to find some bogus
MMD.
Fix this by adding the module_t_wait member back, and setting it to 4
seconds for FS modules.
Fixes: 2f3ce7a56c ("net: sfp: rework the RollBall PHY waiting code")
Reported-by: Wei Lei <quic_leiwei@quicinc.com>
Signed-off-by: Marek Behún <kabel@kernel.org>
Tested-by: Lei Wei <quic_leiwei@quicinc.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
The BQ24296 is most similar to the BQ24196, but the:
1. OTG config is split from CHG config (REG01)
2. ICHG (Fast Charge Current limit) range is smaller (<=3008mA)
3. NTC fault is simplified to 2 bits
Signed-off-by: Hermes Zhang <chenhuiz@axis.com>
Link: https://lore.kernel.org/r/20231208034708.1248389-3-Hermes.Zhang@axis.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
The BQ24296 is most similar to the BQ24196, but the:
1. OTG config is split from CHG config (REG01)
2. ICHG (Fast Charge Current limit) range is smaller (<=3008mA)
3. NTC fault is simplified to 2 bits
Signed-off-by: Hermes Zhang <chenhuiz@axis.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20231208034708.1248389-2-Hermes.Zhang@axis.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Marek Report a possible irq lock inversion dependency warning when
commit 81a06f1d02 ("Revert "drm/rockchip: vop2: Use regcache_sync()
to fix suspend/resume"") lands linux-next.
I can reproduce this warning with:
CONFIG_PROVE_LOCKING=y
CONFIG_DEBUG_LOCKDEP=y
It seems than when use regmap_reinit_cache at runtime whith Mark's
commit 3d59c22bbb ("drm/rockchip: vop2: Convert to use maple tree
register cache"), it will trigger a possible irq lock inversion dependency
warning.
One solution is switch back to REGCACHE_RBTREE, but it seems that
REGCACHE_MAPLE is the future, so I avoid using regmap_reinit_cache,
and drop all the regcache when vop is disabled, then we get a fresh
start at next enbable time.
Fixes: 81a06f1d02 ("Revert "drm/rockchip: vop2: Use regcache_sync() to fix suspend/resume"")
Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Closes: https://lore.kernel.org/all/98a9f15d-30ac-47bf-9b93-3aa2c9900f7b@samsung.com/
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
[dropped the large kernel log of the lockdep report from the message]
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20231217084415.2373043-1-andyshrk@163.com
Currently, a not-yet-entirely-initialized battmgr (e.g. with pd-mapper
not having yet started or ADSP not being up etc.) results in a couple of
zombie power supply devices hanging around.
This is particularly noticeable when trying to suspend the device (even
s2idle): the PSY-internal thermal zone is inaccessible and returns
-ENODEV, which causes log spam.
Register the power supplies only after we received some notification
indicating battmgr is ready to take off.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Tested-by: Luca Weiss <luca.weiss@fairphone.com>
Link: https://lore.kernel.org/r/20231218-topic-battmgr_fixture_attempt-v1-1-6145745f34fe@linaro.org
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
The current PON example is a bit of a mess after converting the binding
document to yaml and in the process updating parts of the example to
match the pmk8350 binding while leaving parts from the older pm8998
example in place.
Clean up the example and make it consistent by adding some newline
separators; dropping labels; removing stray spaces; fixing the PON node
name; and fixing the unit address so that it matches the interrupt
specifiers (which re-encodes the PON base address, 0x800 => 0x8).
Fixes: 76ba1900cb ("dt-bindings: power: reset: qcom-pon: Convert qcom PON binding to yaml")
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231130173017.12723-1-johan+linaro@kernel.org
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
devm_kasprintf and devm_kzalloc return a pointer to dynamically
allocated memory which can be NULL upon failure.
Fixes: 8648aeb5d7 ("power: supply: add Qualcomm PMI8998 SMB2 Charger driver")
Signed-off-by: Kunwu Chan <chentao@kylinos.cn>
Link: https://lore.kernel.org/r/20231124075021.1335289-1-chentao@kylinos.cn
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
When building with clang, there are two section mismatch warnings:
WARNING: modpost: vmlinux: section mismatch in reference: at91_poweroff_probe+0x7c (section: .text) -> at91_wakeup_status (section: .init.text)
WARNING: modpost: vmlinux: section mismatch in reference: at91_shdwc_probe+0xcc (section: .text) -> at91_wakeup_status (section: .init.text)
Drop '__init' from at91_wakeup_status() to clear up the mismatch.
Fixes: dde74a5de8 ("power: reset: at91-sama5d2_shdwc: Stop using module_platform_driver_probe()")
Fixes: 099806de68 ("power: reset: at91-poweroff: Stop using module_platform_driver_probe()")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
This resolves checkpatch warning "quoted string split across lines" on:
1640: WARNING: quoted string split across lines
1641: WARNING: quoted string split across lines
The motive to use multiple MODULE_AUTHOR statements came from this
comment from "include/linux/module.h":
/*
* Author(s), use "Name <email>" or just "Name", for multiple
* authors use multiple MODULE_AUTHOR() statements/lines.
*/
#define MODULE_AUTHOR(_author) MODULE_INFO(author, _author)
Signed-off-by: Charalampos Mitrodimas <charmitro@posteo.net>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
These were mentioned by checkpatch:
Errors:
(1) code indent should use tabs where possible
(2) switch and case should be at the same indent
Warnings:
(1) Missing a blank line after declarations
Signed-off-by: Charalampos Mitrodimas <charmitro@posteo.net>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Use device life-cycle managed register function to simplify probe error
path and eliminate need for explicit remove function.
Signed-off-by: Andrew Davis <afd@ti.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
When the region driver fails while allocating HPA space for a
new region it can be because the parent resource, the CXL Window,
has no more available space.
In that case, the debug user sees this message:
cxl_core:alloc_hpa:555: cxl region2: failed to allocate HPA: -34
Expand the message like this:
cxl_core:alloc_hpa:555: cxl region8: HPA allocation error (-34) for size:0x20000000 in CXL Window 0 [mem 0xf010000000-0xf04fffffff flags 0x200]
Now the debug user can examine /proc/iomem and consider actions
like removing other allocations in that space or reducing the
size of their region request.
Suggested-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Alison Schofield <alison.schofield@intel.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Vishal Verma <vishal.l.verma@intel.com>
Reviewed-by: Fan Ni <fan.ni@samsung.com>
Link: https://lore.kernel.org/r/20231223004740.1401858-1-alison.schofield@intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Some ioctl commands do not require ioctl permission, but are routed to
other permissions such as FILE_GETATTR or FILE_SETATTR. This routing is
done by comparing the ioctl cmd to a set of 64-bit flags (FS_IOC_*).
However, if a 32-bit process is running on a 64-bit kernel, it emits
32-bit flags (FS_IOC32_*) for certain ioctl operations. These flags are
being checked erroneously, which leads to these ioctl operations being
routed to the ioctl permission, rather than the correct file
permissions.
This was also noted in a RED-PEN finding from a while back -
"/* RED-PEN how should LSM module know it's handling 32bit? */".
This patch introduces a new hook, security_file_ioctl_compat(), that is
called from the compat ioctl syscall. All current LSMs have been changed
to support this hook.
Reviewing the three places where we are currently using
security_file_ioctl(), it appears that only SELinux needs a dedicated
compat change; TOMOYO and SMACK appear to be functional without any
change.
Cc: stable@vger.kernel.org
Fixes: 0b24dcb7f2 ("Revert "selinux: simplify ioctl checking"")
Signed-off-by: Alfred Piccioni <alpic@google.com>
Reviewed-by: Stephen Smalley <stephen.smalley.work@gmail.com>
[PM: subject tweak, line length fixes, and alignment corrections]
Signed-off-by: Paul Moore <paul@paul-moore.com>
The QoS blocks saved/restored when toggling the PD_USB power domain are
clocked by ACLK_USB. Attempting to access these memory regions without
that clock running will result in an indefinite CPU stall.
The PD_USB node wasn't specifying this clock dependency, resulting in
hangs when trying to toggle the power domain (either on or off), unless
we get "lucky" and have ACLK_USB running for another reason at the time.
This "luck" can result from the bootloader leaving USB powered/clocked,
and if no built-in driver wants USB, Linux will disable the unused
PD+CLK on boot when {pd,clk}_ignore_unused aren't given. This can also
be unlucky because the two cleanup tasks run in parallel and race: if
the CLK is disabled first, the PD deactivation stalls the boot. In any
case, the PD cannot then be reenabled (if e.g. the driver loads later)
once the clock has been stopped.
Fix this by specifying a dependency on ACLK_USB, instead of only
ACLK_USB_ROOT. The child-parent relationship means the former implies
the latter anyway.
Fixes: c9211fa260 ("arm64: dts: rockchip: Add base DT for rk3588 SoC")
Cc: stable@vger.kernel.org
Signed-off-by: Sam Edwards <CFSworks@gmail.com>
Link: https://lore.kernel.org/r/20231216021019.1543811-1-CFSworks@gmail.com
[changed to only include the missing clock, not dropping the root-clocks]
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The RK806 on the NanoPC-T6 can be used to power on/off the whole board.
Mark it as the system power controller.
Signed-off-by: Hugh Cole-Baker <sigmaris@gmail.com>
Link: https://lore.kernel.org/r/20231216212134.23314-1-sigmaris@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Cool Pi CM5 EVB works as a mother board connect with CM5.
CM5 Specification:
- Rockchip RK3588
- LPDDR4 2/4/8/16 GB
- TF scard slot
- eMMC 8/32/64/128 GB module
- Gigabit ethernet x 1 with PHY YT8531
- Gigabit ethernet x 1 drived by PCIE with YT6801S
CM5 EVB Specification:
- HDMI Type A out x 2
- HDMI Type D in x 1
- USB 2.0 Host x 2
- USB 3.0 OTG x 1
- USB 3.0 Host x 1
- PCIE M.2 E Key for Wireless connection
- PCIE M.2 M Key for NVME connection
- 40 pin header
Signed-off-by: Andy Yan <andyshrk@163.com>
Link: https://lore.kernel.org/r/20231212124407.1897604-1-andyshrk@163.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Add Cool Pi CM5, a board powered by RK3588
CM5 EVB works with a mother board connect with
CM5
Signed-off-by: Andy Yan <andyshrk@163.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231212124340.1897502-1-andyshrk@163.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
CoolPi 4B is a rk3588s based SBC.
Specification:
- Rockchip RK3588S
- LPDDR4 2/4/8/16 GB
- TF scard slot
- eMMC 8/32/64/128 GB module
- Gigabit ethernet drived by PCIE with RTL8111HS
- HDMI Type D out
- Mini DP out
- USB 2.0 Host x 2
- USB 3.0 OTG x 1
- USB 3.0 Host x 1
- WIFI/BT module AIC8800
- 40 pin header
Signed-off-by: Andy Yan <andyshrk@163.com>
arm64: dts: rockchip: Add support for rk3588s based board Cool Pi 4B
Link: https://lore.kernel.org/r/20231212124253.1897438-1-andyshrk@163.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Add Cool Pi 4B, a SBC powered by RK3588S
Signed-off-by: Andy Yan <andyshrk@163.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231212124237.1897378-1-andyshrk@163.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Add names to the pins of the general-purpose expansion header as given
in the Radxa GPIO page[1] following the conventions in the kernel
documentation[2] to make it easier for users to correlate the pins with
functions when using utilities such as 'gpioinfo'.
Signed-off-by: Trevor Woerner <twoerner@gmail.com>
Link: https://lore.kernel.org/r/20231213160556.14424-1-twoerner@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
This should be a per board property, should not be put in
a soc core dtsi.
And when this property convert from default-sample-phase
in linux-5.7 by commit 8a385eb572 ("ARM: dts: rockchip: fix
rockchip,default-sample-phase property names"), the emmc
on rk3036 kylin board get a initialising error:
[ 4.512797] Freeing unused kernel memory: 8192K
[ 4.519500] mmc_host mmc1: Bus speed (slot 0) = 37125000Hz (slot req 37500000Hz, actual 37125000HZ div = 0)
[ 4.530971] mmc1: error -84 whilst initialising MMC card
[ 4.537277] Run /init as init process
[ 4.550932] mmc_host mmc1: Bus speed (slot 0) = 300000Hz (slot req 300000Hz, actual 300000HZ div = 0)
[ 4.664717] mmc_host mmc1: Bus speed (slot 0) = 37125000Hz (slot req 37500000Hz, actual 37125000HZ div = 0)
[ 4.676156] mmc1: error -84 whilst initialising MMC card
I think the reason why the emmc on rk3036 kylin board was able
to work before linux-5.7 was that the illegal property was not
correctly identified by the rockchip dw_mmc driver.
Fixes: faea098e18 ("ARM: dts: rockchip: add core rk3036 dtsi")
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Reviewed-by: Shawn Lin <shawn.lin@rock-chips.com>
Link: https://lore.kernel.org/r/20231218105523.2478315-4-andyshrk@163.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>