SMB2_FLAGS_SIGNED is controlled by the incoming request and only indicates
that a signature accompanies that request. Do not use it to decide whether a
signing-required session must authenticate the request.
Reject an unsigned plaintext request before dispatch when the session
requires signing. Continue to validate signatures on signed requests,
including when signing is optional. Encrypted requests have already been
authenticated during decryption.
An OPLOCK_BREAK acknowledgment is a session request and is subject to the
same signing rule, so do not exclude it from signed-request detection.
Reported-by: Charles Vosburgh <trilobyte777@gmail.com>
Tested-by: ChenXiaoSong <chenxiaosong@kylinos.cn>
Reviewed-by: ChenXiaoSong <chenxiaosong@kylinos.cn>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
The VFS initializes a child's POSIX ACL from the parent's default ACL and
the requested creation mode. Do not mutate the parent ACL or overwrite the
child's VFS-computed access and default ACLs afterwards.
This preserves restrictive ACL_MASK entries and prevents SMB object creation
from widening effective permissions.
Reported-by: Charles Vosburgh <trilobyte777@gmail.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Michael Bommarito says:
====================
amt: fix use-after-free of the skb head across pulls
Several AMT receive and transmit paths cache a pointer into the skb head
and then call a helper that can reallocate that head before the cached
pointer is used again, so the later access reads or writes freed memory.
Patch 1 walks every AMT path and, for each pointer used after a
reallocating call, either snapshots the value before the first pull or
re-derives the pointer after the last one.
Patch 2 is a smaller, separable hardening change: the three handlers
that rewrite the ethernet header do so in place without making the head
private, which corrupts a cloned skb (for example one held by a packet
tap). It adds skb_cow_head() before the rewrite, split out so the
use-after-free fix is not held up by discussion of the clone case.
====================
Link: https://patch.msgid.link/20260711151934.2955226-1-michael.bommarito@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
amt_multicast_data_handler(), amt_membership_query_handler() and
amt_update_handler() rewrite the ethernet header of the decapsulated skb
in place (eth->h_proto, eth->h_dest and, for the query, also
eth->h_source) before handing it up the stack. The skb head may be
shared, for example when a packet tap has cloned it on the underlay
interface, so writing through it corrupts the other reader's copy.
Call skb_cow_head() before the rewrite so the head is private. It is
placed before the pointers into the head are (re-)derived, so a
reallocation caused by the copy is picked up by those derivations.
Fixes: cbc21dc1cf ("amt: add data plane of amt interface")
Signed-off-by: Michael Bommarito <michael.bommarito@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Taehee Yoo <ap420073@gmail.com>
Link: https://patch.msgid.link/20260711151934.2955226-3-michael.bommarito@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Several AMT receive and transmit paths cache a pointer into the skb head
(ip_hdr(), ipv6_hdr(), eth_hdr() or the AMT message header) and then call
a helper that can reallocate that head before the cached pointer is used
again. pskb_may_pull(), ip_mc_may_pull(), ipv6_mc_may_pull(),
iptunnel_pull_header(), ip_mc_check_igmp() and ipv6_mc_check_mld() can all
free the old head and move the data, so a pointer taken before the call
dangles afterwards and the later access is a use-after-free of the freed
head.
The affected sites are:
amt_rcv() caches ip_hdr() before amt_parse_type() pulls, then reads
iph->saddr.
amt_dev_xmit() caches ip_hdr()/ipv6_hdr() before ip_mc_check_igmp()/
ipv6_mc_check_mld() and pskb_may_pull(), then reads the group address.
amt_multicast_data_handler() caches eth_hdr() before pskb_may_pull(),
then writes the L2 header.
amt_membership_query_handler() caches the AMT header, the outer and
inner eth_hdr() and ip_hdr() before iptunnel_pull_header() and several
pulls, then reads and writes them.
amt_igmpv3_report_handler() and amt_mldv2_report_handler() cache
ip_hdr()/ipv6_hdr() and the current group record and read the record
count from the report header inside the record loop, across the
*_mc_may_pull() calls.
amt_update_handler() caches ip_hdr() and the AMT membership-update
header before pskb_may_pull(), iptunnel_pull_header(),
ip_mc_check_igmp() and the report handler, then reads iph->daddr and
amtmu->nonce / amtmu->response_mac.
Fix each site by either snapshotting the scalar that is used after the
pull before the first pull runs, or re-deriving the header pointer from
the skb after the last pull that can move the head. Values that are
stable across the pull (source and group address, the response MAC and
nonce, the record count, the outer source MAC) are snapshotted; pointers
that are written through or read repeatedly are re-derived.
Fixes: cbc21dc1cf ("amt: add data plane of amt interface")
Signed-off-by: Michael Bommarito <michael.bommarito@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Taehee Yoo <ap420073@gmail.com>
Link: https://patch.msgid.link/20260711151934.2955226-2-michael.bommarito@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
FS_IOC32_GETVERSION has a distinct compat command encoding. Passing it
through compat_ptr_ioctl() leaves pidfd_ioctl() unable to recognize the
otherwise architecture-independent inode generation query.
Translate the compat command to FS_IOC_GETVERSION before dispatching it
through the native pidfd ioctl implementation.
Signed-off-by: Li Chen <me@linux.beauty>
Link: https://patch.msgid.link/20260716052822.1034228-1-me@linux.beauty
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner (Amutable) <brauner@kernel.org>
Commit 5dae222a5f ("vfs: allow copy_file_range to copy across devices")
allowed filesystems that implement the copy_file_range() f_op to decide
if they want to access cross-sb copy from/to the same fs type.
The same commit added checks to verify same sb copy for filesystems that
implement ->copy_file_range() and do not support cross-sb copy at the
time, namely, to ceph, fuse and nfs.
The two remaining fs which implement ->copy_file_range(), cifs and
overlayfs started to support cross-sb copy from this time.
While overlayfs does support cross-sb copy when the two underlying files
are on the same base fs, the copy operation on the two real files from
two different overalyfs filesystems is performed with the mounter
creds of the destination overlayfs and the read permission access hook
for the source file was called with the wrong creds.
This could cause either deny of access to copy which would otherwise be
allowed (e.g. with splice) or allow read access to file which would
otherwise be denied.
Fix the latter case by explicitly verifying read access to source file
with the source overlayfs mounter creds.
The former case remains a quirk of cross-sb overlayfs copy, but
userspace could fall back to regular copy so no harm done.
Fixes: 5dae222a5f ("vfs: allow copy_file_range to copy across devices")
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Link: https://patch.msgid.link/20260712122421.203113-1-amir73il@gmail.com
Signed-off-by: Christian Brauner (Amutable) <brauner@kernel.org>
The hvs and v3d drivers use dev_get_drvdata(master) in their unbind
functions. Since the vc4-drm gets removed before its dependent drivers
(vc4_hvs/vc4_v3d) the vc4_hvs_unbind/vc4_v3d_unbind functions try to
get drvdata of its master and fails with a null dereference error.
Use the data pointer passed to the unbind functions directly instead of
dev_get_drvdata(master). This avoids using potentially freed memory.
Fixes: d3f5168a08 ("drm/vc4: Bind and initialize the V3D engine.")
Fixes: c8b75bca92 ("drm/vc4: Add KMS support for Raspberry Pi.")
Signed-off-by: Gregor Herburger <gregor.herburger@linutronix.de>
Link: https://patch.msgid.link/20260721-rpi-vc4-fix-v2-1-b813dcd01dc7@linutronix.de
Reviewed-by: Maíra Canal <mcanal@igalia.com>
Signed-off-by: Maíra Canal <mcanal@igalia.com>
Currently, DRM_PANEL_SAMSUNG_S6E3HA8 selects DRM_DISPLAY_DSC_HELPER
without ensuring its dependency, DRM_DISPLAY_HELPER, is enabled,
causing an unmet dependency.
Let's select DRM_DISPLAY_HELPER as other similar options do.
This unmet dependency bug was found by kconfirm, a static analysis tool
for Kconfig.
Fixes: fd3b2c5f40 ("drm/panel: s6e3ha8: select CONFIG_DRM_DISPLAY_DSC_HELPER")
Signed-off-by: Julian Braha <julianbraha@gmail.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20260712001514.2318597-1-julianbraha@gmail.com
Currently, DRM_PANEL_ILITEK_ILI9882T selects DRM_DISPLAY_DSC_HELPER
without ensuring DRM_DISPLAY_HELPER is also enabled, causing an unmet
dependency and build failure.
Other similar options select DRM_DISPLAY_HELPER, let's do the same here.
This unmet dependency bug was found by kconfirm, a static analysis tool
for Kconfig.
Fixes: 68e28facbc ("drm/panel: ilitek-ili9882t: Select DRM_DISPLAY_DSC_HELPER")
Signed-off-by: Julian Braha <julianbraha@gmail.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20260712002632.2323484-1-julianbraha@gmail.com
Commit 4c95b2b7d4 ("drm/panel: ilitek-ili9881c: support Waveshare
7.0" DSI panel") adds an additional iovcc regulator that other
Ilitek ili9881c based panels apparently do not have or need.
The commit goes out of its way to make usage of this new regulator
optional, dutifully testing if the field in `struct ili9881c` is NULL
before touching the new regulator. However, in the probe function,
it unconditionally fails if devm_regulator_get_optional returns an
error.
devm_regulator_get_optional() returns -ENODEV if the regulator is
missing, causing probe to fail for other panels that do not have
an iovcc-supply set in the device tree.
Fixes: 4c95b2b7d4 ("drm/panel: ilitek-ili9881c: support Waveshare 7.0" DSI panel")
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20260713082213.75759-1-david.oberhollenzer@sigma-star.at
Currently, v3d_power_suspend() removes the GPU clock without first
quiescing the GPU's memory interface (AXI). If the clock is cut while the
core still has outstanding AXI transactions in flight, the hardware is
frozen mid-transaction. That corrupted state survives the power cycle, and
the first job submitted after the next resume will cause a GPU hang
accompanied by an L2T "pte invalid" MMU fault.
The hardware already provides a safe-powerdown sequence for this: request
the GMP to stop and wait for outstanding reads/writes to drain
(v3d_idle_axi()), plus the GCA safe shutdown on pre-4.1 HW
(v3d_idle_gca()). The driver implements both, but the runtime PM support
added later never invoked them when powering the GPU down.
Perform the safe-powerdown sequence in v3d_power_suspend() before
disabling the clock, while the core is still powered.
Link: https://github.com/raspberrypi/linux/issues/7443
Link: https://github.com/raspberrypi/linux/issues/7488
Fixes: 458f2a712a ("drm/v3d: Introduce Runtime Power Management")
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Link: https://patch.msgid.link/20260718-v3d-pm-axi-transactions-v1-2-4ecd7729ed70@igalia.com
Signed-off-by: Maíra Canal <mcanal@igalia.com>
Both read and write may receive internal restart error codes from
the filesystem layer and should be converted to -EINTR. However,
when multishot read support was added, the error code normalization
was lost for both io_read() and io_read_mshot().
Extract the conversion into io_fixup_restart_res() and apply it
in all three locations: io_rw_done(), io_read(), and io_read_mshot().
Fixes: a08d195b58 ("io_uring/rw: split io_read() into a helper")
Cc: stable@vger.kernel.org
Signed-off-by: Yitang Yang <yi1tang.yang@gmail.com>
Link: https://patch.msgid.link/20260722124551.130563-1-yi1tang.yang@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
v3d_idle_axi() drains the GPU's memory interface for a safe powerdown by
using the V3D_GMP_CFG register. It reached both registers with the macros
V3D_CORE_READ and V3D_CORE_WRITE.
On V3D 7.x the GMP is no longer a per-core block; it lives in the hub
register region. Reaching it through the per-core register block addresses
the wrong region.
Select the hub accessors (V3D_{READ,WRITE}) for the GMP on V3D 7.x and
keep the per-core path for earlier generations.
Cc: stable@vger.kernel.org
Fixes: 0ad5bc1ce4 ("drm/v3d: fix up register addresses for V3D 7.x")
Link: https://patch.msgid.link/20260718-v3d-pm-axi-transactions-v1-1-4ecd7729ed70@igalia.com
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Signed-off-by: Maíra Canal <mcanal@igalia.com>
My university email will cease to exist in the next few days, so map it
to a personal email address.
Reviewed-by: André Almeida <andrealmeid@igalia.com>
Acked-by: Maíra Canal <mairacanal@riseup.net>
Link: https://patch.msgid.link/20260717111559.2759217-1-maira.canal@usp.br
Signed-off-by: Maíra Canal <maira.canal@usp.br>
Both pidfs_alloc_file() and pidfs_export_open() need to force O_RDWR
and reapply the pidfd flags that do_dentry_open() strips. Move the
common logic into a helper.
PIDFD_AUTOKILL is now part of the restore mask in the file handle path
as well, but pidfs_export_permission() rejects O_TRUNC, so this is a
no-op there. But warn nonetheless.
Link: https://patch.msgid.link/20260722-esszimmer-umsetzen-nennt-ed5fc604300a@brauner
Signed-off-by: Christian Brauner (Amutable) <brauner@kernel.org>
Li Chen <me@linux.beauty> says:
Reopening a thread pidfd via open_by_handle_at() silently dropped
PIDFD_THREAD because do_dentry_open() strips O_EXCL. Restore the flag
and add a selftest check.
* patches from https://patch.msgid.link/20260716052726.1032092-1-me@linux.beauty:
selftests/pidfd: check PIDFD_THREAD survives open_by_handle_at()
pidfs: preserve thread pidfds reopened by file handle
Link: https://patch.msgid.link/20260716052726.1032092-1-me@linux.beauty
Signed-off-by: Christian Brauner (Amutable) <brauner@kernel.org>
Verify that a thread pidfd reopened via open_by_handle_at() still
reports PIDFD_THREAD in F_GETFL.
Signed-off-by: Li Chen <me@linux.beauty>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://patch.msgid.link/20260716052726.1032092-1-me@linux.beauty
Signed-off-by: Christian Brauner (Amutable) <brauner@kernel.org>
PIDFD_THREAD shares O_EXCL. do_dentry_open() clears O_EXCL after
pidfs_export_open() validates the flags, so open_by_handle_at()
silently turns a thread pidfd into a process pidfd.
Restore PIDFD_THREAD on the opened file, matching pidfs_alloc_file().
Signed-off-by: Li Chen <me@linux.beauty>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://patch.msgid.link/20260716052726.1032092-1-me@linux.beauty
Signed-off-by: Christian Brauner (Amutable) <brauner@kernel.org>
In the trusted.* xattr namespace, ovl_is_escaped_xattr() compares
one byte less than the escaped overlay xattr prefix length. This makes
it match "trusted.overlay.overlay" without requiring the trailing dot.
As a result, an xattr such as "trusted.overlay.overlayfoo" is
incorrectly treated as an escaped overlay xattr. This can be reproduced
by setting "trusted.overlay.overlayfoo" on a lower file and listing xattrs
through an overlay mount. listxattr() then exposes it as
"trusted.overlay.oo", and a following getxattr() on that listed name fails
with ENODATA.
Compare the full escaped prefix, including the trailing dot, so
similarly-prefixed private xattrs are not misclassified.
Fixes: dad02fad84 ("ovl: Support escaped overlay.* xattrs")
Signed-off-by: Yichong Chen <chenyichong@uniontech.com>
Link: https://patch.msgid.link/20260708082221.633602-1-chenyichong@uniontech.com
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Christian Brauner (Amutable) <brauner@kernel.org>
huge_ptep_get() can be handed a virtual address pointing to the middle
of a contpmd/contpte mapped hugetlb folio (examples of callers are
pagemap_hugetlb_range, page_mapped_in_vma).
The arm64 helper rewalks the pgtables in find_num_contig to answer
whether the huge pte we have maps a contpmd or a contpte hugetlb folio,
and returns CONT_PMDS or CONT_PTES, so that it can collect a/d bits over
the contiguous ptes. We can falsely return CONT_PTES instead of
CONT_PMDS if the addr is not aligned. On systems where CONT_PTES !=
CONT_PMDS (meaning page size is 16K), we could collect excess A/D bit
state, meaning extra work for the kernel. Even worse, we may iterate
beyond the PTE table and dereference a garbage ptep pointer to access
physical memory we don't own. Since the ptep pointer is a linear map
address, we may run off the end of the linear map or into a hole,
dereference a VA not mapped into the kernel pgtables and cause kernel
panic.
Fix this by aligning the pmdp pointer down to a contpmd base before
checking equality with the passed huge pte pointer, to correctly answer
whether the huge pte is the base of a contpmd block.
Fixes: 29cb805196 ("arm64: hugetlb: Cleanup huge_pte size discovery mechanisms")
Cc: stable@vger.kernel.org
Acked-by: David Hildenbrand (Arm) <david@kernel.org>
Signed-off-by: Dev Jain <dev.jain@arm.com>
Acked-by: Muchun Song <muchun.song@linux.dev>
Signed-off-by: Will Deacon <will@kernel.org>
The interrupt-status packet reports transmit credits returned by the
device. edge_interrupt_callback() adds the 16-bit value to txCredits
without checking maxTxCredits.
edge_write() uses txCredits minus the software FIFO count as the amount
of data that fits. Since the FIFO is allocated with maxTxCredits bytes,
txCredits exceeding maxTxCredits can cause OOB write in ring buffer.
Cap accumulated credits at maxTxCredits. Conforming devices should never
hit the cap.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Cc: stable@vger.kernel.org
Assisted-by: Codex:GPT-5
Signed-off-by: Sunho Park <shpark061104@gmail.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
HPAGE_PMD_SHIFT expands to BUILD_BUG() when CONFIG_PGTABLE_HAS_HUGE_LEAVES
is not set, causing a compile error when both CONFIG_TRANSPARENT_HUGEPAGE
and CONFIG_HUGETLB_PAGE are disabled:
drivers/gpu/drm/drm_pagemap.c:480:12: error: call to '__compiletime_assert_458'
declared with 'error' attribute: BUILD_BUG failed
480 | order = HPAGE_PMD_ORDER;
| ^
include/linux/huge_mm.h:117:26: note: expanded from macro 'HPAGE_PMD_ORDER'
117 | #define HPAGE_PMD_ORDER (HPAGE_PMD_SHIFT-PAGE_SHIFT)
| ^
include/linux/huge_mm.h:113:28: note: expanded from macro 'HPAGE_PMD_SHIFT'
113 | #define HPAGE_PMD_SHIFT ({ BUILD_BUG(); 0; })
Define DRM_PAGEMAP_PMD_ORDER, which maps to HPAGE_PMD_ORDER when
CONFIG_ARCH_ENABLE_THP_MIGRATION is enabled and to -1 otherwise.
This is safe because all code paths that use DRM_PAGEMAP_PMD_ORDER are
reachable only when CONFIG_ARCH_ENABLE_THP_MIGRATION is enabled.
Fixes: 139ab31aea ("drm/pagemap: Correct cpages calculation for migrate_vma_setup")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/r/202607201914.LpAGsbXs-lkp@intel.com/
Cc: Jan Stancek <jstancek@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Tested-by: Jan Stancek <jstancek@redhat.com>
Reviewed-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Link: https://patch.msgid.link/20260721223244.1102276-1-matthew.brost@intel.com
DRM pagemap overloads the migration PFN array to store driver-provided
PFNs before calling migrate_vma_*() to finalize the migration. If an
error occurs during the incremental copy phase, the migration PFN
entries are reverted to their original state. After reverting the
device-folio mutations, clear any remaining driver-provided PFNs to
avoid confusing the migrate_vma_*() helpers.
Also clear any driver-provided PFNs if populate_devmem_pfn() fails, as
a precaution against stale entries being interpreted as migration PFNs.
Reported-by: Sashiko <sashiko-bot@kernel.org>
Fixes: 3902846af3 ("drm/pagemap Fix error paths in drm_pagemap_migrate_to_devmem")
Fixes: ec265e1f1c ("drm/pagemap: Support source migration over interconnect")
Cc: stable@vger.kernel.org
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Link: https://patch.msgid.link/20260721204353.1082632-1-matthew.brost@intel.com
During reset recovery, mt7925_vif_connect_iter() replays firmware state
for links tracked in mvif->valid_links. After MLO link changes or MCU
timeout recovery, the driver bitmap can temporarily contain a link whose
mac80211 bss_conf has already gone away.
This can pass a NULL bss_conf to mt76_connac_mcu_uni_add_dev(), matching
the crash where x1, the second argument, is NULL:
pc : mt76_connac_mcu_uni_add_dev+0x8c/0x1f8 [mt76_connac_lib]
lr : mt7925_vif_connect_iter+0x9c/0x168 [mt7925_common]
x2 : ffffff80a77f6018 x1 : 0000000000000000 x0 : ffffff8099402080
Call trace:
mt76_connac_mcu_uni_add_dev+0x8c/0x1f8 [mt76_connac_lib]
mt7925_vif_connect_iter+0x9c/0x168 [mt7925_common]
mt7925_mac_reset_work+0x264/0x2f8 [mt7925_common]
Skip missing bss_conf entries before replaying the link. Non-MLO AP/STA
reset replay is unchanged because the helper still returns &vif->bss_conf
for the legacy link.
Fixes: 1406199418 ("wifi: mt76: mt7925: add link handling in mt7925_vif_connect_iter")
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Link: https://patch.msgid.link/20260616161016.19346-1-sean.wang@kernel.org
Signed-off-by: Felix Fietkau <nbd@nbd.name>
There is a new build failure with MT7996E=m MT76_CORE=y and NET_AIROHA_NPU=m:
ld.lld: error: undefined symbol: airoha_npu_get
ld.lld: error: undefined symbol: airoha_npu_put
>>> referenced by npu.c
>>> drivers/net/wireless/mediatek/mt76/npu.o:(mt76_npu_init) in archive vmlinux.a
Fix this by reworking the dependency for the MT7996_NPU to only
allow enabling that when mt76_core can link against the npu driver.
To make sure this gets caught more easily in the future when additional
mt76 variants need the same dependency, also turn CONFIG_MT76_NPU into
a tristate symbol that has the same dependency.
Fixes: 7fb554b1b6 ("wifi: mt76: Introduce the NPU generic layer")
Acked-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://patch.msgid.link/20260612201519.4054683-1-arnd@kernel.org
Signed-off-by: Felix Fietkau <nbd@nbd.name>
mt76_npu_device_active() and mt76_ppe_device_active() read dev->mmio.npu
and dev->mmio.ppe_dev. The mmio, usb and sdio bus structs share a union in
struct mt76_dev, so on USB and SDIO these read unrelated data from the
usb/sdio struct, which is non-NULL in practice.
mt76_npu_device_active() then returns true on USB, and
mt76_rx_poll_complete() takes the offload path and skips
mt76_rx_aggr_reorder(). RX A-MPDU subframes are delivered out of order and
the peer's TCP stack treats that as loss: heavy retransmissions and reduced
throughput in AP mode. Seen on mt7921u, mt7925u, mt76x2u and mt76x0u.
Gate both helpers on mt76_is_mmio() so they only run for the bus type that
owns the mmio union member.
Fixes: 7fb554b1b6 ("wifi: mt76: Introduce the NPU generic layer")
Cc: stable@vger.kernel.org
Tested-by: Nick Morrow <morrownr@gmail.com>
Signed-off-by: Devin Wittmayer <lucid_duck@justthetip.ca>
Link: https://patch.msgid.link/20260720232640.41293-1-lucid_duck@justthetip.ca
Signed-off-by: Felix Fietkau <nbd@nbd.name>
mt7915_mcu_bss_he_tlv() and mt7915_mcu_sta_bfer_tlv() both run after
checking HE support, then dereference the HE PHY capability returned by
mt76_connac_get_he_phy_cap(). That helper can return NULL when no
capability entry matches the vif type.
Fetch the capability before appending the TLV and skip the HE-specific
setup when no matching capability is available.
Fixes: e6d557a78b ("mt76: mt7915: rely on mt76_connac_get_phy utilities")
Signed-off-by: Ruoyu Wang <ruoyuw560@gmail.com>
Acked-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20260620155332.81120-1-ruoyuw560@gmail.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>
mt7925_sta_set_decap_offload() iterates over the vif valid_links mask
when updating decap offload state for an MLO station. The station may not
have a link STA for every valid link of the vif, so mt792x_sta_to_link()
can return NULL for a link that belongs to the vif but not to the station.
The function currently dereferences mlink before checking whether the
link WCID is ready. If mlink is NULL, setting or clearing
MT_WCID_FLAG_HDR_TRANS dereferences a NULL pointer.
Skip links without a station link before touching mlink->wcid.
Fixes: b859ad6530 ("wifi: mt76: mt7925: add link handling in mt7925_sta_set_decap_offload")
Signed-off-by: Guangshuo Li <lgs201920130244@gmail.com>
Link: https://patch.msgid.link/20260708075539.726200-1-lgs201920130244@gmail.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Unloading the mt7915e module with a MT7916 triggers multiples WARN in
__netif_napi_del_locked() and in page_pool_disable_direct_recycling()
because the driver does not disable the napi before destroying it.
This is troublesome since on MT7916 it is required to unload the module
and reinsert it with a different enable_6ghz parameter to change the
frequency. The system generally becomes unstable after reinserting the
module.
Fix it by disabling napi before deleting it. Also, do not delete napi
on WED queues since napi is neither used nor initialized on them.
Fixes: 17f1de56df ("mt76: add common code shared between multiple chipsets")
Signed-off-by: Nicolas Cavallari <nicolas.cavallari@green-communications.fr>
Link: https://patch.msgid.link/20260708144615.24092-1-nicolas.cavallari@green-communications.fr
Signed-off-by: Felix Fietkau <nbd@nbd.name>
PKT_TYPE_TXRX_NOTIFY is an mmio-only event, but mt7615_rx_check() and
mt7615_queue_rx_skb() dispatch it to mt7615_mac_tx_free() on every bus.
mt7615_mac_tx_free() cleans the DMA tx queues with
mt76_queue_tx_cleanup(), which calls queue_ops->tx_cleanup(). Only the
mmio queue ops implement that callback; on the mt7663 USB and SDIO
buses it is NULL, so a TXRX_NOTIFY there calls a NULL pointer in the RX
worker. Same defect as the mt7921 and mt7925 patches in this series.
Drop the event on non-mmio buses via mt76_is_mmio(), as in
commit 5683e1488a ("wifi: mt76: connac: do not check WED status for
non-mmio devices").
Fixes: eb99cc95c3 ("mt76: mt7615: introduce mt7663u support")
Cc: stable@vger.kernel.org
Signed-off-by: Devin Wittmayer <lucid_duck@justthetip.ca>
Link: https://patch.msgid.link/20260627191336.20223-4-lucid_duck@justthetip.ca
Signed-off-by: Felix Fietkau <nbd@nbd.name>
PKT_TYPE_TXRX_NOTIFY is an mmio-only event, but mt7925_rx_check() and
mt7925_queue_rx_skb() dispatch it to mt7925_mac_tx_free() on every bus.
mt7925_mac_tx_free() cleans the DMA tx queues with
mt76_queue_tx_cleanup(), which calls queue_ops->tx_cleanup(). Only the
mmio queue ops implement that callback; on USB it is NULL, so a
TXRX_NOTIFY there calls a NULL pointer in the RX worker:
BUG: kernel NULL pointer dereference, address: 0000000000000000
RIP: 0010:0x0
Call Trace:
mt7925_mac_tx_free+0x58/0x350 [mt7925_common]
mt7925_rx_check+0xe2/0x130 [mt7925_common]
mt76u_rx_worker+0x1b9/0x620 [mt76_usb]
Drop the event on non-mmio buses via mt76_is_mmio(), as in
commit 5683e1488a ("wifi: mt76: connac: do not check WED status for
non-mmio devices").
Fixes: c948b5da6b ("wifi: mt76: mt7925: add Mediatek Wi-Fi7 driver for mt7925 chips")
Cc: stable@vger.kernel.org
Signed-off-by: Devin Wittmayer <lucid_duck@justthetip.ca>
Link: https://patch.msgid.link/20260627191336.20223-3-lucid_duck@justthetip.ca
Signed-off-by: Felix Fietkau <nbd@nbd.name>
PKT_TYPE_TXRX_NOTIFY is an mmio-only event, but mt7921_rx_check() and
mt7921_queue_rx_skb() dispatch it to mt7921_mac_tx_free() on every bus.
mt7921_mac_tx_free() cleans the DMA tx queues with
mt76_queue_tx_cleanup(), which calls queue_ops->tx_cleanup(). Only the
mmio queue ops implement that callback; on USB and SDIO it is NULL, so
a TXRX_NOTIFY there calls a NULL pointer in the RX worker:
BUG: kernel NULL pointer dereference, address: 0000000000000000
RIP: 0010:0x0
Call Trace:
mt7921_mac_tx_free+0x64/0x310 [mt7921_common]
mt7921_rx_check+0x5f/0xf0 [mt7921_common]
mt76u_rx_worker+0x1b9/0x620 [mt76_usb]
Drop the event on non-mmio buses via mt76_is_mmio(), as in
commit 5683e1488a ("wifi: mt76: connac: do not check WED status for
non-mmio devices").
Fixes: 48fab5bbef ("mt76: mt7921: introduce mt7921s support")
Cc: stable@vger.kernel.org
Signed-off-by: Devin Wittmayer <lucid_duck@justthetip.ca>
Link: https://patch.msgid.link/20260627191336.20223-2-lucid_duck@justthetip.ca
Signed-off-by: Felix Fietkau <nbd@nbd.name>
dev->stats fields can be updated concurrently from multiple CPUs
without synchronization.
Use DEV_STATS_INC() for stats increments and DEV_STATS_READ()
when reading dev->stats in ppp_get_stats64() and ppp_get_stats()
to avoid data races.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Qingfang Deng <qingfang.deng@linux.dev>
Link: https://patch.msgid.link/20260715055541.1147542-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In cifs_close_deferred_file(), cifs_close_all_deferred_files(), and
cifs_close_deferred_file_under_dentry(), when a pending deferred close
is cancelled via cancel_delayed_work(), the subsequent kmalloc_obj() to
add the file to the local processing list may fail under memory pressure.
The loop breaks immediately, but the cancelled work is no longer pending
(it would have called _cifsFileInfo_put()), and the cfile is never added
to file_head for processing. The cifsFileInfo reference and the open
server handle both leak.
Fix by saving the cfile that failed allocation in a local variable,
breaking as before, and calling _cifsFileInfo_put() on it after
releasing the lock. Any files later in the iteration are unaffected
since their deferred work is still pending and will fire normally.
Fixes: e3fc065682 ("cifs: Deferred close performance improvements")
Signed-off-by: Frank Sorenson <sorenson@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Windows Server's directory enumeration metadata lags behind the actual
file size after a write+close or rename. A concurrent readdir() in the
window between close() returning to userspace and stat() being called
overwrites the correct cached i_size with the stale server value, causing
stat() to return the wrong size.
Once _cifsFileInfo_put() removes the last writable handle from
openFileList, is_size_safe_to_change() permits readdir to overwrite
i_size. smb2_close_getattr() then stamps cifs_i->time = jiffies, making
the corrupt cached value appear fresh to the next stat().
The existing check (see Fixes:) only blocked stale size updates while
an active RW lease was held, not after the last writable handle closes.
Add cifsInodeInfo->time_last_write, written via smp_store_release() at
writable close and on setattr/truncate. is_size_safe_to_change() checks
is_inode_writable() first (acquiring open_file_lock), then rejects a
readdir size update if time_last_write falls within acregmax jiffies.
The spinlock release in _cifsFileInfo_put() forms a store-release barrier
that pairs with the spin_lock() (load-acquire) in is_inode_writable(),
ensuring the subsequent smp_load_acquire() on time_last_write observes
any update from a concurrent close(). When a size update is rejected and
the server value differs from the cached one, cifs_i->time is cleared to
force a fresh QUERY_INFO on the next stat().
readdir is also blocked from changing i_size while writable handles are
open or an RW lease is held, even on direct-IO mounts.
For deferred close (closetimeo > 0), time_last_write is refreshed at the
actual server close in smb2_deferred_work_close() and in the
cifs_close_deferred_file*() drain paths invoked by lease/oplock breaks
and tcon teardown, anchoring the protection window to the real close time
rather than the earlier userspace close.
time_last_write == 0 skips the time_before() check to avoid false
positives near boot on 32-bit systems where jiffies starts close to
INITIAL_JIFFIES.
Does not reproduce against Samba or with actimeo=0.
Fixes: e4b61f3b1c ("cifs: prevent updating file size from server if we have a read/write lease")
Signed-off-by: Frank Sorenson <sorenson@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
intel_mac_finish() is registered as the phylink mac_finish()
callback for the Elkhart Lake SGMII ports. phylink calls it at
the end of every major link reconfiguration, including the
initial one during probe.
The callback selects the PMC ModPHY LCPLL programming for the
requested MAC-side interface and then power-cycles the SerDes.
On Elkhart Lake that ModPHY is also used by the on-die AHCI
SATA PHY. Reapplying the programming during the initial
boot-time link-up disturbs the shared analog block while it is
still driving SATA, so the SATA link fails to train:
ata1: SATA link down (SStatus 1 SControl 300)
The disk carrying the root filesystem is never detected and the
system hangs at rootwait. Ethernet itself comes up normally,
which makes the failure look unrelated to the network driver.
Before mac_finish() runs, the legacy SerDes power-up path has
already programmed SERDES_GCR0 for the current interface. The
1G and 2.5G ModPHY tables selected by mac_finish() correspond
to the SerDes lane rate, so read that rate back from SERDES_GCR0
and skip the PMC reprogramming and SerDes power-cycle when it
already matches the selected interface.
This keeps the disruptive reprogramming out of the boot path
when the SerDes is configured correctly, while preserving the
previous behavior when a real SGMII/1000BASE-X to 2500BASE-X
rate change is needed. If the register read fails, reconfigure
as before.
Fixes: a42f6b3f1c ("net: stmmac: configure SerDes according to the interface mode")
Cc: stable@vger.kernel.org
Signed-off-by: Markus Breitenberger <bre@keba.com>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/20260713171619.192452-1-bre@breiti.cc
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
To pick up the changes in:
103ff3a50e ("KVM: s390: Add capability to support 2G hugepages")
229132c309 ("LoongArch: KVM: Add DMSINTC device support")
2619da73bb ("KVM: x86: Use __DECLARE_FLEX_ARRAY() for UAPI structures with VLAs")
4aebd7d5c7 ("KVM: s390: Add KVM capability for ESA mode guests")
4f256d5770 ("KVM: x86: nSVM: Save/restore gPAT with KVM_{GET,SET}_NESTED_STATE")
822790ab01 ("KVM: x86: Define KVM_X86_QUIRK_NESTED_SVM_SHARED_PAT")
8800dbf661 ("KVM: arm64: Allow userspace to create protected VMs when pKVM is enabled")
bf8f3cec93 ("KVM: s390: vsie: Refactor handle_stfle")
c547c51ff4 ("KVM: arm64: gic-v5: Add ARM_VGIC_V5 device to KVM headers")
d7507a94a0 ("KVM: SVM: Treat exit_code as an unsigned 64-bit value through all of KVM")
This addresses these perf build warnings:
Warning: Kernel ABI header differences:
diff -u tools/include/uapi/linux/kvm.h include/uapi/linux/kvm.h
diff -u tools/arch/x86/include/uapi/asm/kvm.h arch/x86/include/uapi/asm/kvm.h
diff -u tools/arch/x86/include/uapi/asm/svm.h arch/x86/include/uapi/asm/svm.h
diff -u tools/arch/s390/include/uapi/asm/kvm.h arch/s390/include/uapi/asm/kvm.h
Please see tools/include/uapi/README for further details.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To pick up the changes in:
45e57cfb7b ("fs: Clarify FS_CASEFOLD_FL semantics in UAPI header")
That don't result in changes to the string tables generated from this header.
This addresses this perf build warning:
Warning: Kernel ABI header differences:
diff -u tools/perf/trace/beauty/include/uapi/linux/fs.h include/uapi/linux/fs.h
Please see tools/include/uapi/README for further details.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To pick up the changes in:
4987a5763f ("net: block MSG_NO_SHARED_FRAGS in sendmsg()")
That don't result in changes to the string tables generated from this header.
This addresses this perf build warning:
Warning: Kernel ABI header differences:
diff -u tools/perf/trace/beauty/include/linux/socket.h include/linux/socket.h
Please see tools/include/uapi/README for further details.
Cc: Jann Horn <jannh@google.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
