The RCU-specific resched_cpu() function sends a resched IPI to the
specified CPU, which can be used to force the tick on for a given
nohz_full CPU. This is needed when this nohz_full CPU is looping in the
kernel while blocking the current grace period. However, for the tick
to actually be forced on in all cases, that CPU's rcu_data structure's
->rcu_urgent_qs flag must be set beforehand. This commit therefore
causes rcu_implicit_dynticks_qs() to set this flag prior to invoking
resched_cpu() on a holdout nohz_full CPU.
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Because list_for_each_entry_rcu() can now check for holding a
lock as well as for being in an RCU read-side critical section,
this commit replaces the workqueue_sysfs_unregister() function's
use of assert_rcu_or_wq_mutex() and list_for_each_entry_rcu() with
list_for_each_entry_rcu() augmented with a lockdep_is_held() optional
argument.
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
None of rcu_segcblist_set_len(), rcu_segcblist_add_len(), or
rcu_segcblist_xchg_len() are used outside of kernel/rcu/rcu_segcblist.c.
This commit therefore makes them static.
Fixes: eda669a6a2 ("rcu/nocb: Atomic ->len field in rcu_segcblist structure")
Signed-off-by: kbuild test robot <lkp@intel.com>
[ paulmck: "Fixes:" updated per Stephen Rothwell feedback. ]
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The function hlist_bl_del_init_rcu() is declared in rculist_bl.h,
but never used. This commit therefore removes it.
Signed-off-by: Ethan Hansen <1ethanhansen@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
There are tests for full and narrows loads from bpf_sysctl.file_pos, but
for bpf_sysctl.write only full load is tested. Add the missing test.
Suggested-by: Andrey Ignatov <rdna@fb.com>
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrey Ignatov <rdna@fb.com>
Link: https://lore.kernel.org/bpf/20191029143027.28681-1-iii@linux.ibm.com
The return value of raw_tp programs is ignored by __bpf_trace_run()
that calls them. The verifier also allows any value to be returned.
For BTF-enabled raw_tp lets enforce 'return 0', so that return value
can be used for something in the future.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20191029032426.1206762-1-ast@kernel.org
Looks like omap3 RNG is similar to the omap2 rng, let's get it working
by configring the dts node for it.
We must also add rng_ick to core_l4_clkdm as noted by Adam Ford.
And please note that the RNG is likely disabled on HS devices. At least
n900 does not have it accessible, and instead omap3-rom-rng driver must
be used. So let's tag RNG as disabled on n900 as noted by Pali Rohár
<pali.rohar@gmail.com>.
On am3517 at least the clocks need to be configured to get it working
as noted by Adam Ford, so let's tag it disabled for now.
Cc: Aaro Koskinen <aaro.koskinen@iki.fi>
Cc: Adam Ford <aford173@gmail.com>
Cc: Pali Rohár <pali.rohar@gmail.com>
Cc: Sebastian Reichel <sre@kernel.org>
Cc: Tero Kristo <t-kristo@ti.com>
Tested-by: Adam Ford <aford173@gmail.com> #logicpd-torpedo-37xx-devkit
Signed-off-by: Tony Lindgren <tony@atomide.com>
Clang warns:
../drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc_link.c:2520:42:
error: implicit conversion from enumeration type 'enum transmitter' to
different enumeration type 'enum physical_phy_id'
[-Werror,-Wenum-conversion]
psr_context->smuPhyId = link->link_enc->transmitter;
~ ~~~~~~~~~~~~~~~~^~~~~~~~~~~
1 error generated.
As the comment above this assignment states, this is intentional. To
match previous warnings of this nature, add a conversion function that
explicitly converts between the enums and warns when there is a
mismatch.
See commit 828cfa2909 ("drm/amdgpu: Fix amdgpu ras to ta enums
conversion") and commit d9ec5cfd5a ("drm/amd/display: Use switch table
for dc_to_smu_clock_type") for previous examples of this.
v2: use PHYLD_UNKNOWN for the default case.
Fixes: e0d08a40a6 ("drm/amd/display: Add debugfs entry for reading psr state")
Link: https://github.com/ClangBuiltLinux/linux/issues/758
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
kfree has taken null pointer into account. hence it is safe to remove
the unnecessary check.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: zhong jiang <zhongjiang@huawei.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
These were not aligned for optimal performance for GPUVM.
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Tianci Yin <tianci.yin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Set mmSQ_CONFIG.DISABLE_SMEM_SOFT_CLAUSE as W/R.
Signed-off-by: Le Ma <le.ma@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cp wptr in wb buffer is outdated after VF FLR.
The outdated wptr may cause cp to execute unexpected packets.
Reset cp wptr in wb buffer.
Signed-off-by: HaiJun Chang <HaiJun.Chang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
PSP lost connection when err_event_athub occurs. These cleanup work can be
skipped in BACO reset.
v2: squash in missing include (Alex)
Signed-off-by: Le Ma <le.ma@amd.com>
Reviewed-by: Hawking Zhang <hawking.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The err_event_athub error will mess up the buffer and cause UVD resume hang.
Signed-off-by: Le Ma <le.ma@amd.com>
Reviewed-by: Hawking Zhang <hawking.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
SRIOV VF doesn't support BACO.
Only PF with BACO capability can do it.
Signed-off-by: Jiange Zhao <Jiange.Zhao@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
There is no need to cast a typed pointer to a void pointer when calling
a function that accepts the latter. Remove it, as the cast prevents
further compiler checks.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drivers/gpu/drm/amd/amdgpu/amdgpu_ttm.c:1221:24: warning: variable adev set but not used [-Wunused-but-set-variable]
drivers/gpu/drm/amd/amdgpu/amdgpu_ttm.c:488:24: warning: variable adev set but not used [-Wunused-but-set-variable]
drivers/gpu/drm/amd/amdgpu/amdgpu_ttm.c:547:24: warning: variable adev set but not used [-Wunused-but-set-variable]
It is never used, so can removed it.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The bitmap in cu_info structure is defined as a 4x4 size array. In
Acturus, this matrix is initialized as a 4x2. Based on the 8 shaders.
In the gpu cache filling initialization, the access to the bitmap matrix
was done as an 8x1 instead of 4x2. Causing an out of bounds memory
access error.
Due to this, the number of GPU cache entries was inconsistent.
Signed-off-by: Alex Sierra <alex.sierra@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The KIQ is on the second MEC and its reservation is covered in the
latter logic, so no need to reserve its bit twice.
Signed-off-by: Yong Zhao <Yong.Zhao@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Given amdkfd.ko has been merged into amdgpu.ko, this switch is no
longer useful.
Signed-off-by: Yong Zhao <Yong.Zhao@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The API was reduced to include only knowledge currently needed by the
FW scan logic, the rest is legacy. Support the new, reduced version.
Using the old API with newer firmwares (starting from
iwlwifi-*-50.ucode, which implements and requires the new API version)
causes an assertion failure similar to this one:
[ 2.854505] iwlwifi 0000:00:14.3: 0x20000038 | BAD_COMMAND
Signed-off-by: Ayala Beker <ayala.beker@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
mt76 dma layer is supposed to unmap skb data buffers while keep txwi
mapped on hw dma ring. At the moment mt76 wrongly unmap txwi or does
not unmap data fragments in even positions for non-linear skbs. This
issue may result in hw hangs with A-MSDU if the system relies on IOMMU
or SWIOTLB. Fix this behaviour properly unmapping data fragments on
non-linear skbs.
Fixes: 17f1de56df ("mt76: add common code shared between multiple chipsets")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
On same device (e.g. U7612E-H1) PCIE_ASPM causes continuous mcu hangs and
instability. Since mt76x2 series does not manage PCIE PS states, first we
try to disable ASPM using pci_disable_link_state. If it fails, we will
disable PCIE PS configuring PCI registers.
This patch has been successfully tested on U7612E-H1 mini-pice card
Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
syzbot reported an issue where we crash at setup time if failslab is
used. The issue is that io_wq_create() returns an error pointer on
failure, not NULL. Hence io_uring thought the io-wq was setup just
fine, but in reality it's a garbage error pointer.
Use IS_ERR() instead of a NULL check, and assign ret appropriately.
Reported-by: syzbot+221cc24572a2fed23b6b@syzkaller.appspotmail.com
Fixes: 561fb04a6a ("io_uring: replace workqueue usage with io-wq")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The commit ade49db337 ("ALSA: hda/hdmi - Allow audio component for
AMD/ATI and Nvidia HDMI") introduced the spec->pcm_lock mutex lock to
the whole generic_hdmi_init() function for avoiding the race with the
audio component registration. However, this caused a dead lock when
the unsolicited event is handled without the audio component, as the
codec gets runtime-resumed in hdmi_present_sense() which is already
inside the spec->pcm_lock in its caller.
For avoiding this deadlock, add a new mutex only for the audio
component binding that is used in both generic_hdmi_init() and the
audio notifier registration where the jack callbacks are handled /
re-registered.
Fixes: ade49db337 ("ALSA: hda/hdmi - Allow audio component for AMD/ATI and Nvidia HDMI")
Reported-and-tested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://lore.kernel.org/r/s5himo7i89i.wl-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
For the HPD interrupt functionality the HW depends on power wells in the
display core domain to be on. Accordingly when enabling these power
wells the HPD polling logic will force an HPD detection cycle to account
for hotplug events that may have happened when such a power well was
off.
Thus a detect cycle started by polling could start a new detect cycle if
a power well in the display core domain gets enabled during detect and
stays enabled after detect completes. That in turn can lead to a
detection cycle runaway.
To prevent re-triggering a poll-detect cycle make sure we drop all power
references we acquired during detect synchronously by the end of detect.
This will let the poll-detect logic continue with polling (matching the
off state of the corresponding power wells) instead of scheduling a new
detection cycle.
Fixes: 6cfe7ec02e ("drm/i915: Remove the unneeded AUX power ref from intel_dp_detect()")
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=112125
Reported-and-tested-by: Val Kulkov <val.kulkov@gmail.com>
Reported-and-tested-by: wangqr <wqr.prg@gmail.com>
Cc: Val Kulkov <val.kulkov@gmail.com>
Cc: wangqr <wqr.prg@gmail.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191028181517.22602-1-imre.deak@intel.com
This converts the TXX9 SPI driver to use GPIO descriptors
to control the GPIO chip selects.
As the driver was clearly (ab)using the device tree "reg"
property to offset into the global GPIO chip we have to
add a hack to counter the hack: add a 1-to-1 chip select
to GPIO offset mapping for all 16 lines on the TXX9 GPIO
chip. The details are described in a largeish comment
in the patch.
We do not need to set up the GPIO as output any more since
the core will take care of this, as well as it will handle
the polarity inversion semantics.
Cc: Atsushi Nemoto <atsushi.nemoto@sord.co.jp>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20191030073832.24038-1-linus.walleij@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The btndet-delay device property could control the HW debounce time.
It is easy to adjust the sensitivity of push button.
Signed-off-by: Shuming Fan <shumingf@realtek.com>
Link: https://lore.kernel.org/r/20191030085556.14351-1-shumingf@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The sensitivity could improve by decreasing the HW debounce time
and reduce the delay time of workequeue.
This patch added a device property for HW debounce time control.
We could change this value to tune the sensitivity of push button.
Signed-off-by: Shuming Fan <shumingf@realtek.com>
Link: https://lore.kernel.org/r/20191030085533.14299-1-shumingf@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This driver adds pinctrl/GPIO support for Intel Tiger Lake SoC. The
GPIO controller is based on the next generation GPIO hardware but still
compatible with the one supported by the Intel core pinctrl/GPIO driver.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
We can restore only values that had been changed and do not spam kernel log
with unnecessary messages. Convert intel_gpio_update_pad_mode() to a helper
function that will be used across few callers.
Suggested-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Since we didn't get any new reports from users about wrong settings
of pad ownership, there is no point to spam kernel log with it. Thus,
drop level from warning to debug.
Also, modify format to be in align with the rest restore helpers.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Refactor restoring GPI_IE registers by using an introduced helper.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Refactor restoring HOSTSW_OWN registers by using an introduced helper.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Deduplicate restoring PADCFGx registers by using a common helper.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Keeping the IRQ chip definition static shares it with multiple instances
of the GPIO chip in the system. This is bad and now we get this warning
from GPIO library:
"detected irqchip that is shared with multiple gpiochips: please fix the driver."
Hence, move the IRQ chip definition from being driver static into the struct
intel_pinctrl. So a unique IRQ chip is used for each GPIO chip instance.
This patch is heavily based on the attachment to the bug by Christoph Marz.
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=202543
Fixes: 6e08d6bbeb ("pinctrl: Add Intel Cherryview/Braswell pin controller support")
Depends-on: 83b9dc1131 ("pinctrl: cherryview: Associate IRQ descriptors to irqdomain")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
One spelling mistake is being fixed: benerate -> generate.
It is a complimentary fix to the commit 505485a83c ("pinctrl:
cherryview fixed typo in comment").
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Commit 03c4749dd6 ("gpio / ACPI: Drop unnecessary ACPI GPIO to Linux
GPIO translation") has made the cherryview gpio numbers sparse, to get
a 1:1 mapping between ACPI pin numbers and gpio numbers in Linux.
This has greatly simplified things, but the code setting the
irq_valid_mask was not updated for this, so the valid mask is still in
the old "compressed" numbering with the gaps in the pin numbers skipped,
which is wrong as irq_valid_mask needs to be expressed in gpio numbers.
This results in the following error on devices using pin 24 (0x0018) on
the north GPIO controller as an ACPI event source:
[ 0.422452] cherryview-pinctrl INT33FF:01: Failed to translate GPIO to IRQ
This has been reported (by email) to be happening on a Caterpillar CAT T20
tablet and I've reproduced this myself on a Medion Akoya e2215t 2-in-1.
This commit uses the pin number instead of the compressed index into
community->pins to clear the correct bits in irq_valid_mask for GPIOs
using GPEs for interrupts, fixing these errors and in case of the
Medion Akoya e2215t also fixing the LID switch not working.
Cc: stable@vger.kernel.org
Fixes: 03c4749dd6 ("gpio / ACPI: Drop unnecessary ACPI GPIO to Linux GPIO translation")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
When consumer requests a pin, in order to be on the safest side,
we switch it first to GPIO mode followed by immediate transition
to the input state. Due to posted writes it's luckily to be a single
I/O transaction.
However, if firmware or boot loader already configures the pin
to the GPIO mode, user expects no glitches for the requested pin.
We may check if the pin is pre-configured and leave it as is
till the actual consumer toggles its state to avoid glitches.
Fixes: 7981c0015a ("pinctrl: intel: Add Intel Sunrisepoint pin controller and GPIO support")
Depends-on: f5a26acf01 ("pinctrl: intel: Initialize GPIO properly when used through irqchip")
Cc: stable@vger.kernel.org
Cc: fei.yang@intel.com
Reported-by: Oliver Barta <oliver.barta@aptiv.com>
Reported-by: Malin Jonsson <malin.jonsson@ericsson.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Including:
- Follow-on fix for Renesas IPMMU to get rid of a redundant
error message.
- Quirk for AMD IOMMU to make it work on another Acer Laptop
model with a broken IVRS ACPI table.
- Fix for a panic at kdump in the Intel IOMMU driver.
-----BEGIN PGP SIGNATURE-----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=Sce8
-----END PGP SIGNATURE-----
Merge tag 'iommu-fixes-v5.4-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull iommu fixes from Joerg Roedel:
- Follow-on fix for Renesas IPMMU to get rid of a redundant error
message.
- Quirk for AMD IOMMU to make it work on another Acer Laptop model with
a broken IVRS ACPI table.
- Fix for a panic at kdump in the Intel IOMMU driver.
* tag 'iommu-fixes-v5.4-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
iommu/vt-d: Fix panic after kexec -p for kdump
iommu/amd: Apply the same IVRS IOAPIC workaround to Acer Aspire A315-41
iommu/ipmmu-vmsa: Remove dev_err() on platform_get_irq() failure
