This commit changes variable names that can cause confusion.
For example, variable DST_MIN is quite confusing since the
keyword 'udp_dst_min' and keyword 'dst_min' is used with pg_ctrl.
On the following commit, 'dst_min' will be used to set destination IP,
and the existing variable name DST_MIN should be changed.
Variable names are matched to the exact keyword used with pg_ctrl.
Signed-off-by: Daniel T. Lee <danieltimlee@gmail.com>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
kexec reboot fails randomly in UEFI based KVM guest. The firmware
just resets while calling efi_delete_dummy_variable(); Unfortunately
I don't know how to debug the firmware, it is also possible a potential
problem on real hardware as well although nobody reproduced it.
The intention of the efi_delete_dummy_variable is to trigger garbage collection
when entering virtual mode. But SetVirtualAddressMap can only run once
for each physical reboot, thus kexec_enter_virtual_mode() is not necessarily
a good place to clean a dummy object.
Drop the efi_delete_dummy_variable so that kexec reboot can work.
Signed-off-by: Dave Young <dyoung@redhat.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Matthew Garrett <mjg59@google.com>
Cc: Ben Dooks <ben.dooks@codethink.co.uk>
Cc: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Cc: Jerry Snitselaar <jsnitsel@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Lukas Wunner <lukas@wunner.de>
Cc: Lyude Paul <lyude@redhat.com>
Cc: Octavian Purdila <octavian.purdila@intel.com>
Cc: Peter Jones <pjones@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Scott Talbert <swt@techie.net>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-efi@vger.kernel.org
Cc: linux-integrity@vger.kernel.org
Link: https://lkml.kernel.org/r/20191002165904.8819-8-ard.biesheuvel@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The efi_rci2_sysfs_init() is not used outside of rci2-table.c so
make it static to silence the following Sparse warning:
drivers/firmware/efi/rci2-table.c:79:12: warning: symbol 'efi_rci2_sysfs_init' was not declared. Should it be static?
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Dave Young <dyoung@redhat.com>
Cc: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Cc: Jerry Snitselaar <jsnitsel@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Lukas Wunner <lukas@wunner.de>
Cc: Lyude Paul <lyude@redhat.com>
Cc: Matthew Garrett <mjg59@google.com>
Cc: Octavian Purdila <octavian.purdila@intel.com>
Cc: Peter Jones <pjones@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Scott Talbert <swt@techie.net>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-efi@vger.kernel.org
Cc: linux-integrity@vger.kernel.org
Link: https://lkml.kernel.org/r/20191002165904.8819-7-ard.biesheuvel@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
If __calc_tpm2_event_size() fails to parse an event it will return 0,
resulting tpm2_calc_event_log_size() returning -1. Currently there is
no check of this return value, and 'efi_tpm_final_log_size' can end up
being set to this negative value resulting in a crash like this one:
BUG: unable to handle page fault for address: ffffbc8fc00866ad
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
RIP: 0010:memcpy_erms+0x6/0x10
Call Trace:
tpm_read_log_efi()
tpm_bios_log_setup()
tpm_chip_register()
tpm_tis_core_init.cold.9+0x28c/0x466
tpm_tis_plat_probe()
platform_drv_probe()
...
Also __calc_tpm2_event_size() returns a size of 0 when it fails
to parse an event, so update function documentation to reflect this.
The root cause of the issue that caused the failure of event parsing
in this case is resolved by Peter Jone's patchset dealing with large
event logs where crossing over a page boundary causes the page with
the event count to be unmapped.
Signed-off-by: Jerry Snitselaar <jsnitsel@redhat.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Ben Dooks <ben.dooks@codethink.co.uk>
Cc: Dave Young <dyoung@redhat.com>
Cc: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Lukas Wunner <lukas@wunner.de>
Cc: Lyude Paul <lyude@redhat.com>
Cc: Matthew Garrett <mjg59@google.com>
Cc: Octavian Purdila <octavian.purdila@intel.com>
Cc: Peter Jones <pjones@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Scott Talbert <swt@techie.net>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-efi@vger.kernel.org
Cc: linux-integrity@vger.kernel.org
Cc: stable@vger.kernel.org
Fixes: c46f340569 ("tpm: Reserve the TPM final events table")
Link: https://lkml.kernel.org/r/20191002165904.8819-6-ard.biesheuvel@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
When there are no entries to put into the final event log, some machines
will return the template they would have populated anyway. In this case
the nr_events field is 0, but the rest of the log is just garbage.
This patch stops us from trying to iterate the table with
__calc_tpm2_event_size() when the number of events in the table is 0.
Tested-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Peter Jones <pjones@redhat.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Acked-by: Matthew Garrett <mjg59@google.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Ben Dooks <ben.dooks@codethink.co.uk>
Cc: Dave Young <dyoung@redhat.com>
Cc: Jerry Snitselaar <jsnitsel@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Lukas Wunner <lukas@wunner.de>
Cc: Octavian Purdila <octavian.purdila@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Scott Talbert <swt@techie.net>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-efi@vger.kernel.org
Cc: linux-integrity@vger.kernel.org
Cc: stable@vger.kernel.org
Fixes: c46f340569 ("tpm: Reserve the TPM final events table")
Link: https://lkml.kernel.org/r/20191002165904.8819-5-ard.biesheuvel@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Some machines generate a lot of event log entries. When we're
iterating over them, the code removes the old mapping and adds a
new one, so once we cross the page boundary we're unmapping the page
with the count on it. Hilarity ensues.
This patch keeps the info from the header in local variables so we don't
need to access that page again or keep track of if it's mapped.
Tested-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Peter Jones <pjones@redhat.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Acked-by: Matthew Garrett <mjg59@google.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Ben Dooks <ben.dooks@codethink.co.uk>
Cc: Dave Young <dyoung@redhat.com>
Cc: Jerry Snitselaar <jsnitsel@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Lukas Wunner <lukas@wunner.de>
Cc: Octavian Purdila <octavian.purdila@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Scott Talbert <swt@techie.net>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-efi@vger.kernel.org
Cc: linux-integrity@vger.kernel.org
Cc: stable@vger.kernel.org
Fixes: 44038bc514 ("tpm: Abstract crypto agile event size calculations")
Link: https://lkml.kernel.org/r/20191002165904.8819-4-ard.biesheuvel@linaro.org
[ Minor edits. ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The kernel command line option efivar_ssdt= allows the name to be
specified of an EFI variable containing an ACPI SSDT table that should
be loaded into memory by the OS, and treated as if it was provided by
the firmware.
Currently, that code will always iterate over the EFI variables and
compare each name with the provided name, even if the command line
option wasn't set to begin with.
So bail early when no variable name was provided. This works around a
boot regression on the 2012 Mac Pro, as reported by Scott.
Tested-by: Scott Talbert <swt@techie.net>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: <stable@vger.kernel.org> # v4.9+
Cc: Ben Dooks <ben.dooks@codethink.co.uk>
Cc: Dave Young <dyoung@redhat.com>
Cc: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Cc: Jerry Snitselaar <jsnitsel@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Lukas Wunner <lukas@wunner.de>
Cc: Lyude Paul <lyude@redhat.com>
Cc: Matthew Garrett <mjg59@google.com>
Cc: Octavian Purdila <octavian.purdila@intel.com>
Cc: Peter Jones <pjones@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-efi@vger.kernel.org
Cc: linux-integrity@vger.kernel.org
Fixes: 475fb4e8b2 ("efi / ACPI: load SSTDs from EFI variables")
Link: https://lkml.kernel.org/r/20191002165904.8819-3-ard.biesheuvel@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The CPER parser assumes that the class code is big endian, but at least
on this edk2-derived Intel Purley platform it's little endian:
efi: EFI v2.50 by EDK II BIOS ID:PLYDCRB1.86B.0119.R05.1701181843
DMI: Intel Corporation PURLEY/PURLEY, BIOS PLYDCRB1.86B.0119.R05.1701181843 01/18/2017
{1}[Hardware Error]: device_id: 0000:5d:00.0
{1}[Hardware Error]: slot: 0
{1}[Hardware Error]: secondary_bus: 0x5e
{1}[Hardware Error]: vendor_id: 0x8086, device_id: 0x2030
{1}[Hardware Error]: class_code: 000406
^^^^^^ (should be 060400)
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Ben Dooks <ben.dooks@codethink.co.uk>
Cc: Dave Young <dyoung@redhat.com>
Cc: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Cc: Jerry Snitselaar <jsnitsel@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Lyude Paul <lyude@redhat.com>
Cc: Matthew Garrett <mjg59@google.com>
Cc: Octavian Purdila <octavian.purdila@intel.com>
Cc: Peter Jones <pjones@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Scott Talbert <swt@techie.net>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-efi@vger.kernel.org
Cc: linux-integrity@vger.kernel.org
Link: https://lkml.kernel.org/r/20191002165904.8819-2-ard.biesheuvel@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
perf script:
Andi Kleen:
- Fix recovery from LBR/binary mismatch in the "brstackinsn" --field.
perf annotate:
Arnaldo Carvalho de Melo:
- Propagate errors so that meaningful messages can be presented to the
user in case of problems.
perf map:
Steve MacLean:
- Fix handling of maps partially overlapped, resolving symbols in the
ranges not replaced by new mmaps.
perf tests:
Ian Rogers:
- Use raise() instead of NULL derefs to avoid causing a SIGILL rather than a
SIGSEGV for optimized builds that turn NULL derefs into ud2 instructions.
perf LLVM:
Ian Rogers:
- Don't access out-of-scope array.
perf inject:
Steve MacLean:
- Fix JIT_CODE_MOVE filename, that was having a u64 truncaded into a 32-bit
snprintf format and also a missing ".so" suffix in another case.
libsubcmd:
Ian Rogers:
- Make _FORTIFY_SOURCE defines dependent on the feature, avoiding
false positives with with memory sanitizers such as LLVM's ASan.
Vendor specific events:
Intel:
Andi Kleen:
- Fix period for Intel fixed counters.
s390:
Thomas Richter (2):
- Fix some event details transaction for machine type 8561.
tools headers UAPI:
Arnaldo Carvalho de Melo:
- Sync headers with the kernel, catching new usbdevfs ioctls and
madvise behaviours to properly decode in 'perf trace' output.
Documentation:
Steve MacLean:
- Correct and clarify jitdump spec.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQR2GiIUctdOfX2qHhGyPKLppCJ+JwUCXZMyWQAKCRCyPKLppCJ+
Jz0qAQC9lZQrWR+Q5S1rXbp5x45+mIji7Q8UK5pyzhpLRAOYNwD/cR6v6TCE96lE
a2hCqV+gV+pbc70Bw5H7TN+kVOtGaQE=
=wcfs
-----END PGP SIGNATURE-----
Merge tag 'perf-urgent-for-mingo-5.4-20191001' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent
Pull perf/urgent fixes from Arnaldo Carvalho de Melo:
perf script:
Andi Kleen:
- Fix recovery from LBR/binary mismatch in the "brstackinsn" --field.
perf annotate:
Arnaldo Carvalho de Melo:
- Propagate errors so that meaningful messages can be presented to the
user in case of problems.
perf map:
Steve MacLean:
- Fix handling of maps partially overlapped, resolving symbols in the
ranges not replaced by new mmaps.
perf tests:
Ian Rogers:
- Use raise() instead of NULL derefs to avoid causing a SIGILL rather than a
SIGSEGV for optimized builds that turn NULL derefs into ud2 instructions.
perf LLVM:
Ian Rogers:
- Don't access out-of-scope array.
perf inject:
Steve MacLean:
- Fix JIT_CODE_MOVE filename, that was having a u64 truncaded into a 32-bit
snprintf format and also a missing ".so" suffix in another case.
libsubcmd:
Ian Rogers:
- Make _FORTIFY_SOURCE defines dependent on the feature, avoiding
false positives with with memory sanitizers such as LLVM's ASan.
Vendor specific events:
Intel:
Andi Kleen:
- Fix period for Intel fixed counters.
s390:
Thomas Richter (2):
- Fix some event details transaction for machine type 8561.
tools headers UAPI:
Arnaldo Carvalho de Melo:
- Sync headers with the kernel, catching new usbdevfs ioctls and
madvise behaviours to properly decode in 'perf trace' output.
Documentation:
Steve MacLean:
- Correct and clarify jitdump spec.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=uUi1
-----END PGP SIGNATURE-----
Merge tag 'rxrpc-fixes-20191007' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs
David Howells says:
====================
rxrpc: Syzbot-inspired fixes
Here's a series of patches that fix a number of issues found by syzbot:
(1) A reference leak on rxrpc_call structs in a sendmsg error path.
(2) A tracepoint that looked in the rxrpc_peer record after putting it.
Analogous with this, though not presently detected, the same bug is
also fixed in relation to rxrpc_connection and rxrpc_call records.
(3) Peer records don't pin local endpoint records, despite accessing them.
(4) Access to connection crypto ops to clean up a call after the call's
ref on that connection has been put.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Jiri Pirko says:
====================
netdevsim: implement devlink dev_info op
Initial implementation of devlink dev_info op - just driver name is
filled up and sent to user. Bundled with selftest.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Add test to verify netdevsim driver name returned by devlink dev info.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Do simple dev_info devlink operation implementation which only fills up
the driver name.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In order for attrs to be prepared for reporter dump dumpit callback,
set GENL_DONT_VALIDATE_DUMP_STRICT instead of GENL_DONT_VALIDATE_DUMP.
Fixes: ee85da535f ("devlink: have genetlink code to parse the attrs during dumpit"
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
gpiod_get_from_of_node() is being retired in favor of
fwnode_gpiod_get_index(), that behaves similar to gpiod_get_index(),
but can work with arbitrary firmware node. It will also be able to
support secondary software nodes.
Let's switch this driver over.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Link: https://lore.kernel.org/r/20191004231017.130290-8-dmitry.torokhov@gmail.com
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
devm_fwnode_get_index_gpiod_from_child() is going away as the name is
too unwieldy, let's switch to using the new devm_fwnode_gpiod_get().
Note that we no longer need to check for NULL as devm_fwnode_gpiod_get()
will return -ENOENT if GPIO is missing.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Link: https://lore.kernel.org/r/20191004231017.130290-7-dmitry.torokhov@gmail.com
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
devm_gpiod_get_from_of_node() is being retired in favor of
devm_fwnode_gpiod_get_index(), that behaves similar to
devm_gpiod_get_index(), but can work with arbitrary firmware node. It
will also be able to support secondary software nodes.
Let's switch this driver over.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Acked-by: Adam Thomson <Adam.Thomson.Opensource@diasemi.com>
Link: https://lore.kernel.org/r/20191004231017.130290-6-dmitry.torokhov@gmail.com
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
devm_gpiod_get_from_of_node() is being retired in favor of
devm_fwnode_gpiod_get_index(), that behaves similar to
devm_gpiod_get_index(), but can work with arbitrary firmware node. It
will also be able to support secondary software nodes.
Let's switch this driver over.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Link: https://lore.kernel.org/r/20191004231017.130290-5-dmitry.torokhov@gmail.com
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
devm_gpiod_get_from_of_node() is being retired in favor of
devm_fwnode_gpiod_get_index(), that behaves similar to
devm_gpiod_get_index(), but can work with arbitrary firmware node. It
will also be able to support secondary software nodes.
Let's switch this driver over.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Link: https://lore.kernel.org/r/20191004231017.130290-4-dmitry.torokhov@gmail.com
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
devm_gpiod_get_from_of_node() is being retired in favor of
[devm_]fwnode_gpiod_get_index(), that behaves similar to
devm_gpiod_get_index(), but can work with arbitrary firmware node. It
will also be able to support secondary software nodes.
Let's switch this driver over.
Note that now that we have a good non-devm API for getting GPIO from
arbitrary firmware node, there is no reason to use devm API here as
regulator core takes care of managing lifetime of "enable" GPIO and we
were immediately detaching requested GPIO from devm anyway.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Link: https://lore.kernel.org/r/20191004231017.130290-3-dmitry.torokhov@gmail.com
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
devm_gpiod_get_from_of_node() is being retired in favor of
devm_fwnode_gpiod_get_index(), that behaves similar to
devm_gpiod_get_index(), but can work with arbitrary firmware node. It
will also be able to support secondary software nodes.
Let's switch this driver over.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Link: https://lore.kernel.org/r/20191004231017.130290-2-dmitry.torokhov@gmail.com
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Sphinx is generating a build warning as the title underline
of this file is too short.
Signed-off-by: Adam Zerella <adam.zerella@gmail.com>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
This driver doesn't do anything with the match for the device node. The
logic is the same as looking to see if a device node exists or not
because this driver wouldn't probe unless there is a device node match
when the device is created from DT. Just test for the presence of the
device node to simplify and avoid referencing a potentially undefined
match table when CONFIG_OF=n.
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Mark Brown <broonie@kernel.org>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Frank Rowand <frowand.list@gmail.com>
Cc: <linux-spi@vger.kernel.org>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20191004214334.149976-9-swboyd@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Only the desc field is really used, so use struct regulator_desc instead.
Then struct pbias_regulator_data can be removed.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Link: https://lore.kernel.org/r/20191007114320.20977-1-axel.lin@ingics.com
Signed-off-by: Mark Brown <broonie@kernel.org>
It's more straightforward to use for statement here.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Acked-by: Steve Twiss <stwiss.opensource@diasemi.com>
Link: https://lore.kernel.org/r/20191007115009.25672-1-axel.lin@ingics.com
Signed-off-by: Mark Brown <broonie@kernel.org>
There are several problems in the error handling in fsl_mqs_probe().
1) "ret" isn't initialized on some paths. GCC has a feature which
warns about uninitialized variables but the code initializes "ret"
to zero at the start of the function so the checking is turned off.
2) "gpr_np" is a pointer so initializing it to zero is confusing and
generates a Sparse warning.
3) of_parse_phandle() doesn't return error pointers on error, it returns
NULL.
4) If devm_snd_soc_register_component() fails then the function should
free the "gpr_np".
Fixes: 9e28f6532c ("ASoC: fsl_mqs: Add MQS component driver")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/20191004102208.GB823@mwanda
Signed-off-by: Mark Brown <broonie@kernel.org>
Fixes gcc '-Wunused-but-set-variable' warning:
sound/soc/fsl/fsl_mqs.c: In function fsl_mqs_hw_params:
sound/soc/fsl/fsl_mqs.c:54:6: warning: variable bclk set but not used [-Wunused-but-set-variable]
It is never used, so can be removed.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Link: https://lore.kernel.org/r/20191006105522.58560-1-yuehaibing@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
If GPIOLIB is not set, building fails:
sound/soc/codecs/tas2770.c: In function tas2770_reset:
sound/soc/codecs/tas2770.c:38:3: error: implicit declaration of function gpiod_set_value_cansleep; did you mean gpio_set_value_cansleep? [-Werror=implicit-function-declaration]
gpiod_set_value_cansleep(tas2770->reset_gpio, 0);
^~~~~~~~~~~~~~~~~~~~~~~~
gpio_set_value_cansleep
sound/soc/codecs/tas2770.c: In function tas2770_i2c_probe:
sound/soc/codecs/tas2770.c:749:24: error: implicit declaration of function devm_gpiod_get_optional; did you mean devm_regulator_get_optional? [-Werror=implicit-function-declaration]
tas2770->reset_gpio = devm_gpiod_get_optional(tas2770->dev,
^~~~~~~~~~~~~~~~~~~~~~~
devm_regulator_get_optional
sound/soc/codecs/tas2770.c:751:13: error: GPIOD_OUT_HIGH undeclared (first use in this function); did you mean GPIOF_INIT_HIGH?
GPIOD_OUT_HIGH);
^~~~~~~~~~~~~~
GPIOF_INIT_HIGH
Reported-by: Hulk Robot <hulkci@huawei.com>
Fixes: 1a476abc72 ("tas2770: add tas2770 smart PA kernel driver")
Suggested-by: Ladislav Michl <ladis@linux-mips.org>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Link: https://lore.kernel.org/r/20191006104631.60608-1-yuehaibing@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This probe function is only called if the device is backed by a DT node,
so switch this call to of_device_get_match_data() to reduce code size
and simplify a bit. This also avoids needing to reference a potentially
undefined variable because of_device_get_match_data() doesn't need to
know anything beyond the struct device to find the match table.
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Paul Cercueil <paul@crapouillou.net>
Cc: Liam Girdwood <lgirdwood@gmail.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Takashi Iwai <tiwai@suse.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Frank Rowand <frowand.list@gmail.com>
Cc: <alsa-devel@alsa-project.org>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20191004214334.149976-8-swboyd@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Lost in the rebasing was Tvrtko's reminder that we need to keep an
uninterruptible wait around for the Ironlake VT-d w/a
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191006165002.30312-3-chris@chris-wilson.co.uk
We can have 2 dcpm-s with the same backend and frontend name
(capture + playback pair), this causes the following debugfs error
on Intel Bay Trail systems:
[ 298.969049] debugfs: Directory 'SSP2-Codec' with parent 'Baytrail Audio Port' already present!
This commit adds a ":playback" or ":capture" postfix to the debugfs dir
name fixing this.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20191005212202.5206-1-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The LX2160A esdhc controllers are setup by the driver to be DMA
coherent, but without marking them as such in DT, Linux thinks they
are not. This can lead to random sporadic DMA errors, even to the
extent of preventing boot, such as:
mmc0: ADMA error
mmc0: sdhci: ============ SDHCI REGISTER DUMP ===========
mmc0: sdhci: Sys addr: 0x00000000 | Version: 0x00002202
mmc0: sdhci: Blk size: 0x00000008 | Blk cnt: 0x00000001
mmc0: sdhci: Argument: 0x00000000 | Trn mode: 0x00000013
mmc0: sdhci: Present: 0x01f50008 | Host ctl: 0x00000038
mmc0: sdhci: Power: 0x00000003 | Blk gap: 0x00000000
mmc0: sdhci: Wake-up: 0x00000000 | Clock: 0x000040d8
mmc0: sdhci: Timeout: 0x00000003 | Int stat: 0x00000001
mmc0: sdhci: Int enab: 0x037f108f | Sig enab: 0x037f108b
mmc0: sdhci: ACmd stat: 0x00000000 | Slot int: 0x00002202
mmc0: sdhci: Caps: 0x35fa0000 | Caps_1: 0x0000af00
mmc0: sdhci: Cmd: 0x0000333a | Max curr: 0x00000000
mmc0: sdhci: Resp[0]: 0x00000920 | Resp[1]: 0x001d8a33
mmc0: sdhci: Resp[2]: 0x325b5900 | Resp[3]: 0x3f400e00
mmc0: sdhci: Host ctl2: 0x00000000
mmc0: sdhci: ADMA Err: 0x00000009 | ADMA Ptr: 0x000000236d43820c
mmc0: sdhci: ============================================
mmc0: error -5 whilst initialising SD card
These are caused by the device's descriptor fetch hitting speculatively
loaded CPU cache lines that the CPU does not see through the normal,
non-cacheable DMA coherent mapping that it uses for non-coherent
devices.
DT and the device must agree wrt whether the device is DMA coherent or
not.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Acked-by: Li Yang <leoyang.li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
CONFIG_COMPAT_VDSO is defined by passing '-DCONFIG_COMPAT_VDSO' to the
compiler when the generic compat vDSO code is in use. It's much cleaner
and simpler to expose this as a proper Kconfig option (like x86 does),
so do that and remove the bodge.
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
For consistency with CROSS_COMPILE_COMPAT, mechanically rename COMPATCC
to CC_COMPAT so that specifying aspects of the compat vDSO toolchain in
the environment isn't needlessly confusing.
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
Directly passing the '--target' option to clang by appending to
COMPATCC does not work if COMPATCC has been specified explicitly as
an argument to Make unless the 'override' directive is used, which is
ugly and different to what is done in the top-level Makefile.
Move the '--target' option for clang out of COMPATCC and into
VDSO_CAFLAGS, where it will be picked up when compiling and assembling
the 32-bit vDSO under clang.
Reported-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
KBUILD_CPPFLAGS is defined differently depending on whether the main
compiler is clang or not. This means that it is not possible to build
the compat vDSO with GCC if the rest of the kernel is built with clang.
Define VDSO_CPPFLAGS directly to break this dependency and allow a clang
kernel to build a compat vDSO with GCC:
$ make ARCH=arm64 CROSS_COMPILE=aarch64-linux-gnu- \
CROSS_COMPILE_COMPAT=arm-linux-gnueabihf- CC=clang \
COMPATCC=arm-linux-gnueabihf-gcc
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
There's no need to export COMPATCC, so just define it locally in the
vdso32/Makefile, which is the only place where it is used.
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
Rather than force the use of GCC for the compat cross-compiler, instead
extract the target from CROSS_COMPILE_COMPAT and pass it to clang if the
main compiler is clang.
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
The DDC/CI protocol involves sending a multi-byte request to the
display via I2C, which is typically followed by a multi-byte
response. The internal I2C controller only allows single byte
reads/writes or reads of 8 sequential bytes, hence DDC/CI is not
supported when the internal I2C controller is used. The I2C
transfers complete without errors, however the data in the response
is garbage. Abort transfers to/from slave address 0x37 (DDC) with
-EOPNOTSUPP, to make it evident that the communication is failing.
Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Sean Paul <sean@poorly.run>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191002124354.v2.1.I709dfec496f5f0b44a7b61dcd4937924da8d8382@changeid
What we thought would be the module clock is actually the clock meant to be
used by the sensors, and play no role in the CSI controller. Now that the
binding has been updated to reflect that, let's update the device tree too.
Fixes: d2b9c64443 ("ARM: dts: sun7i: Add CSI0 controller")
Reported-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <mripard@kernel.org>
It turns out that what was thought to be the module clock was actually the
clock meant to be used by the sensor, and isn't playing any role with the
CSI controller itself. Let's drop that clock from our binding.
Fixes: c5e8f4ccd7 ("media: dt-bindings: media: Add Allwinner A10 CSI binding")
Reported-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <mripard@kernel.org>
The formula in the BSP kernel indicates that a 16-byte overhead is used
when sending the HFP. However, this value is currently set to 6 in the
sun6i_mipi_dsi driver, which makes some panels flashing.
Fix this overhead value.
Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20191006160303.24413-3-icenowy@aosc.io
Move the CAN enablement from SoM DTSi to board DTS, as each board might need
different CAN configuration. Moreover, disable CAN2 on the PDK2 as it is not
available on any connector. This also fixes on-SoM SD slot operation, as it
shares pins with the CAN2.
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: Ludwig Zenz <lzenz@dh-electronics.com>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: NXP Linux Team <linux-imx@nxp.com>
To: linux-arm-kernel@lists.infradead.org
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Old early platform device support is now sh-specific. Before moving on
to implementing new early platform framework based on real platform
devices, prefix all early platform symbols with 'sh_'.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Cc: Rich Felker <dalias@libc.org>
Link: https://lore.kernel.org/r/20191003092913.10731-3-brgl@bgdev.pl
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
