The noencrypt flag was intended to be set if the "frame was received
unencrypted" according to include/uapi/linux/nl80211.h. However, the
current behavior is opposite of this.
Cc: stable@vger.kernel.org
Fixes: 018f6fbf54 ("mac80211: Send control port frames over nl80211")
Signed-off-by: Denis Kenzior <denkenz@gmail.com>
Link: https://lore.kernel.org/r/20190827224120.14545-3-denkenz@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
In ieee80211_deliver_skb_to_local_stack intercepts EAPoL frames if
mac80211 is configured to do so and forwards the contents over nl80211.
During this process some additional data is also forwarded, including
whether the frame was received encrypted or not. Unfortunately just
prior to the call to ieee80211_deliver_skb_to_local_stack, skb->cb is
cleared, resulting in incorrect data being exposed over nl80211.
Fixes: 018f6fbf54 ("mac80211: Send control port frames over nl80211")
Cc: stable@vger.kernel.org
Signed-off-by: Denis Kenzior <denkenz@gmail.com>
Link: https://lore.kernel.org/r/20190827224120.14545-2-denkenz@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
We need to use a different firmware for C0 versions of killer Qu NICs.
Add structures for them and handle them in the if block that detects
C0 revisions.
Additionally, instead of having an inclusive check for QnJ devices,
make the selection exclusive, so that switching to QnJ is the
exception, not the default. This prevents us from having to add all
the non-QnJ cards to an exclusion list. To do so, only go into the
QnJ block if the device has an RF ID type HR and HW revision QnJ.
Cc: stable@vger.kernel.org # 5.2
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/20190821171732.2266-1-luca@coelho.fi
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
If 'fq' qdisc is used and a program has requested timestamps,
skb->tstamp needs to be cleared, else fq will treat these as
'transmit time'.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Tests showed that the keygenflags parameter is not handled
correctly within the zcrypt ccamisc generate cca cipher key
code. A similar code is used with cca cipher key value import
and there the flags are handled correctly. For unknown reason
these lines have not been updated for the generate function
and so this patch now introduces these two lines of code.
This affects only pkey with the use of CCA cipher keys and
the use of additional key generate flags.
Fixes: 4bc123b18c ("s390/zcrypt: Add low level functions for CCA AES cipher keys")
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
The A64 ISA accepts distinct (but overlapping) ranges of immediates for:
* add arithmetic instructions ('I' machine constraint)
* sub arithmetic instructions ('J' machine constraint)
* 32-bit logical instructions ('K' machine constraint)
* 64-bit logical instructions ('L' machine constraint)
... but we currently use the 'I' constraint for many atomic operations
using sub or logical instructions, which is not always valid.
When CONFIG_ARM64_LSE_ATOMICS is not set, this allows invalid immediates
to be passed to instructions, potentially resulting in a build failure.
When CONFIG_ARM64_LSE_ATOMICS is selected the out-of-line ll/sc atomics
always use a register as they have no visibility of the value passed by
the caller.
This patch adds a constraint parameter to the ATOMIC_xx and
__CMPXCHG_CASE macros so that we can pass appropriate constraints for
each case, with uses updated accordingly.
Unfortunately prior to GCC 8.1.0 the 'K' constraint erroneously accepted
'4294967295', so we must instead force the use of a register.
Signed-off-by: Andrew Murray <andrew.murray@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
On architectures that discard .exit.* sections at runtime, a
warning is printed for each jump label that is used within an
in-kernel __exit annotated function:
can't patch jump_label at ehci_hcd_cleanup+0x8/0x3c
WARNING: CPU: 0 PID: 1 at kernel/jump_label.c:410 __jump_label_update+0x12c/0x138
As these functions will never get executed (they are free'd along
with the rest of initmem) - we do not need to patch them and should
not display any warnings.
The warning is displayed because the test required to satisfy
jump_entry_is_init is based on init_section_contains (__init_begin to
__init_end) whereas the test in __jump_label_update is based on
init_kernel_text (_sinittext to _einittext) via kernel_text_address).
Fixes: 1948367768 ("jump_label: Annotate entries that operate on __init code earlier")
Signed-off-by: Andrew Murray <andrew.murray@arm.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
Check that we can write and read the guest memory with this s390x
ioctl, and that some error cases are handled correctly.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Link: https://lkml.kernel.org/r/20190829130732.580-1-thuth@redhat.com
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Explicitly specify the valid ranges for size and ar, and reword
buf requirements a bit.
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Link: https://lkml.kernel.org/r/20190829124746.28665-1-cohuck@redhat.com
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
If the KVM_S390_MEM_OP ioctl is called with an access register >= 16,
then there is certainly a bug in the calling userspace application.
We check for wrong access registers, but only if the vCPU was already
in the access register mode before (i.e. the SIE block has recorded
it). The check is also buried somewhere deep in the calling chain (in
the function ar_translation()), so this is somewhat hard to find.
It's better to always report an error to the userspace in case this
field is set wrong, and it's safer in the KVM code if we block wrong
values here early instead of relying on a check somewhere deep down
the calling chain, so let's add another check to kvm_s390_guest_mem_op()
directly.
We also should check that the "size" is non-zero here (thanks to Janosch
Frank for the hint!). If we do not check the size, we could call vmalloc()
with this 0 value, and this will cause a kernel warning.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Link: https://lkml.kernel.org/r/20190829122517.31042-1-thuth@redhat.com
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
-----BEGIN PGP SIGNATURE-----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=IVL8
-----END PGP SIGNATURE-----
Merge tag 'vfio-ccw-20190828' of https://git.kernel.org/pub/scm/linux/kernel/git/kvms390/vfio-ccw into features
Add some logging into the s390dbf.
* tag 'vfio-ccw-20190828' of https://git.kernel.org/pub/scm/linux/kernel/git/kvms390/vfio-ccw:
vfio-ccw: add some logging
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
If kasan enabled kernel is used as crash kernel it crashes itself with
program check loop during kdump execution. The reason for that is that
kasan shadow memory backed by pages beyond OLDMEM_SIZE. Make kasan memory
allocator respect physical memory limit imposed by kdump.
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Replace strncmp usage in console mode setup code with simple strcmp.
Replace strncmp which is used for prefix comparison with str_has_prefix.
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
"earlyprintk" option documentation does not clearly state which
platform supports which additional values (e.g. ",keep"). Preserve old
option behaviour and reuse str_has_prefix instead of strncmp for prefix
testing.
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Reuse str_has_prefix instead of strncmp with hardcoded length to
make the intent of a comparison more obvious.
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Command line option values passed to __setup callbacks are always
null-terminated and "s390_iommu=" may only accept "strict" as value.
So replace strncmp with strcmp.
While at it also make s390_iommu_setup return 1, which means this
command line option is handled by this callback.
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Remove including <linux/version.h> that don't need it.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
A null pointer would be passed to a call of the function “of_node_put”
immediately after a call of the function “of_graph_get_next_endpoint”
failed at one place.
Remove this superfluous function call.
This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Inside function ctrl_cx2341x_getv4lflags(), qctrl.flag
will be uninitlaized if cx2341x_ctrl_query() returns -EINVAL.
However, it will be used in the later if statement, which is
potentially unsafe.
Signed-off-by: Yizhuo <yzhai003@ucr.edu>
Acked-by: Mike Isely <isely@pobox.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
A null pointer would be passed to a call of the function "kfree" directly
after a call of the function "kcalloc" failed at one place.
Pass the data structure member "urb" instead for which memory
was allocated before (so that this resource will be properly cleaned up).
This issue was detected by using the Coccinelle software.
Fixes: d571b592c6 ("media: em28xx: don't use coherent buffer for DMA transfers")
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
The gic-its node unit-address has an additional zero compared
to the actual reg value. Fix it.
Fixes: 2d87061e70 ("arm64: dts: ti: Add Support for J721E SoC")
Reported-by: Robert Tivy <rtivy@ti.com>
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Tero Kristo <t-kristo@ti.com>
The gic-its node unit-address has an additional zero compared
to the actual reg value. Fix it.
Fixes: ea47eed33a ("arm64: dts: ti: Add Support for AM654 SoC")
Reported-by: Robert Tivy <rtivy@ti.com>
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Tero Kristo <t-kristo@ti.com>
The Main NavSS block on J721E SoCs contains a HwSpinlock IP instance that
is same as the IP on AM65x SoCs and similar to the IP on some OMAP SoCs.
Add the DT node for this on J721E SoCs. The node is present within the
Main NavSS block, and is added as a child node under the cbass_main_navss
interconnect node.
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Tero Kristo <t-kristo@ti.com>
The Main NavSS block on AM65x SoCs contains a HwSpinlock IP instance
that is similar to the IP on some OMAP SoCs. Add the DT node for this
on AM65x SoCs. The node is present within the NavSS block, and is
added as a child node under the cbass_main_navss interconnect node.
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Common processor board for K3 J721E platform has two push buttons
namely SW10 and SW11.
Add a gpio-keys device node to model them as input keys in Linux.
Add required pinmux nodes to set GPIO pins as input.
Signed-off-by: Nikhil Devshatwar <nikhil.nd@ti.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Reviewed-by: Keerthy <j-keerthy@ti.com>
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Add pinctrl macros for J721E SoC. These macro definitions are
similar to that of AM6, but adding new definitions to avoid
any naming confusions in the soc dts files.
Acked-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Tero Kristo <t-kristo@ti.com>
There are 10 gpio instances inside SoC with 3 groups as below:
- Group1: main_gpio0, main_gpio2, main_gpio4, main_gpio6
- Group2: main_gpio1, main_gpio3, main_gpio5, main_gpio7
- Group3: wkup_gpio0, wkup_gpio1
Only one instance can be used in each group at a time. So use main_gpio0,
main_gpio1 and wkup_gpio0 for the current linux context and mark other
gpio nodes as disabled.
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Reviewed-by: Keerthy <j-keerthy@ti.com>
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Similar to the gpio groups in main domain, there is one gpio group
in wakup domain with 2 module instances in it. This gpio group pins
out 84 lines(6 banks). Add DT node for these 2 gpio module instances.
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Reviewed-by: Keerthy <j-keerthy@ti.com>
Signed-off-by: Tero Kristo <t-kristo@ti.com>
There are 8 instances of gpio modules in main domain divided into 2 groups:
- Group1: gpio0, gpio2, gpio4, gpio6
- Group2: gpio1, gpio3, gpio5, gpio7
Groups are created to provide protection between two different processor
virtual worlds. There are x gpio lines coming out of each group. Each module
in a group has equal x gpio lines pinned out. There is a top level mux for
selecting the module instance for each pin coming out of group. Exactly
one module can be selected to control the corresponding pin. This muxing
can be controlled along the pad mux configuration registers.
Group1 pins out 128 lines(8 banks). Group 2 pins out 36 lines(2 banks).
Add DT nodes for each module instance in the main domain. Users should
make sure that correct gpio instance is selected in their pad configuration.
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Reviewed-by: Keerthy <j-keerthy@ti.com>
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Update the power-domain cells to 2 and mark all devices as
exclusive. Main uart 0 is the debug console for processor boards
and it is used by different software entities like u-boot, atf,
linux simultaneously. So just mark main_uart0 as shared device
for common processor board.
Reviewed-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Update the power-domain cells to 2 and mark all devices as
exclusive. Main uart 0 is the debug console for based boards
and it is used by different software entities like u-boot, atf,
linux. So just mark main_uart0 as shared device for base board.
Reviewed-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Since the chained quirks via chained_before flag is applied before the
depth check, it may lead to the endless recursive calls, when the
chain were set up incorrectly. Fix it by moving the depth check at
the beginning of the loop.
Fixes: 1f57825077 ("ALSA: hda - Add chained_before flag to the fixup entry")
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
lib/devres.c, which implements devm_ioremap_resource(), is only built
when CONFIG_HAS_IOMEM is set/enabled, so MTD_HYPERBUS should depend
on HAS_IOMEM. Fixes a build error and a Kconfig warning (as seen on
UML builds):
WARNING: unmet direct dependencies detected for MTD_COMPLEX_MAPPINGS
Depends on [n]: MTD [=m] && HAS_IOMEM [=n]
Selected by [m]:
- MTD_HYPERBUS [=m] && MTD [=m]
ERROR: "devm_ioremap_resource" [drivers/mtd/hyperbus/hyperbus-core.ko] undefined!
Fixes: dcc7d3446a ("mtd: Add support for HyperBus memory devices")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Vignesh Raghavendra <vigneshr@ti.com>
Cc: Miquel Raynal <miquel.raynal@bootlin.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: linux-mtd@lists.infradead.org
Acked-by: Vignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
omap_elm_correct_data() returns the number of bitflips for the whole
page. This is wrong, it should return the maximum number of bitflips
found in each ECC step.
In my case with a 4k page size NAND mtcdore reported -EUCLEAN with
only 12 bitflips on a page where we could correct up to 128 bits per
page (provided they are distributed equally on the 8 ECC steps)
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
In brcmstb_nand_verify_erased_page(), the ECC chunk pointer calculation
while correcting erased page bitflips is wrong, fix it.
Fixes: 02b88eea9f ("mtd: brcmnand: Add check for erased page bitflips")
Signed-off-by: Claire Lin <claire.lin@broadcom.com>
Reviewed-by: Ray Jui <ray.jui@broadcom.com>
Signed-off-by: Kamal Dasu <kdasu.kdev@gmail.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
While reading a trace data file that had 100,000s of tasks, the process
took an extremely long time. I profiled it down to add_new_comm(), which
was doing a qsort() call on an array that was pretty much already sorted
(all but the last element. qsort() isn't very efficient when dealing
with mostly sorted arrays, and this definitely showed its issues.
When adding a new task to the task list, instead of using qsort(), do
another bsearch() with a function that will find the element before
where the new task will be inserted in. Then simply shift the rest of
the array, and insert the task where it belongs.
Fixes: f7d82350e5 ("tools/events: Add files to create libtraceevent.a")
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: linux-trace-devel@vger.kernel.org
Link: http://lkml.kernel.org/r/20190828191820.127233764@goodmis.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
If the re-allocation of tep->cmdlines succeeds, then the previous
allocation of tep->cmdlines will be freed. If we later fail in
add_new_comm(), we must not free cmdlines, and also should assign
tep->cmdlines to the new allocation. Otherwise when freeing tep, the
tep->cmdlines will be pointing to garbage.
Fixes: a6d2a61ac6 ("tools lib traceevent: Remove some die() calls")
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: linux-trace-devel@vger.kernel.org
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/r/20190828191819.970121417@goodmis.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When we started using a thread to catch the PERF_RECORD_BPF_EVENT meta
data events to then ask the kernel for further info (BTF, etc) for BPF
programs shortly after they get loaded, we forgot to use
unshare(CLONE_FS) as was done in:
868a832918 ("perf top: Support lookup of symbols in other mount namespaces.")
Do it so that we can enter the namespaces to read the build-ids at the
end of a 'perf record' session for the DSOs that had hits.
Before:
Starting a 'stress-ng --cpus 8' inside a container and then, outside the
container running:
# perf record -a --namespaces sleep 5
# perf buildid-list | grep stress-ng
#
We would end up with a 'perf.data' file that had no entry in its
build-id table for the /usr/bin/stress-ng binary inside the container
that got tons of PERF_RECORD_SAMPLEs.
After:
# perf buildid-list | grep stress-ng
f2ed02c68341183a124b9b0f6e2e6c493c465b29 /usr/bin/stress-ng
#
Then its just a matter of making sure that that binary debuginfo package
gets available in a place that 'perf report' will look at build-id keyed
ELF files, which, in my case, on a f30 notebook, was a matter of
installing the debuginfo file for the distro used in the container,
fedora 31:
# rpm -ivh http://fedora.c3sl.ufpr.br/linux/development/31/Everything/x86_64/debug/tree/Packages/s/stress-ng-debuginfo-0.07.29-10.fc31.x86_64.rpm
Then, because perf currently looks for those debuginfo files (richer ELF
symtab) inside that namespace (look at the setns calls):
openat(AT_FDCWD, "/proc/self/ns/mnt", O_RDONLY) = 137
openat(AT_FDCWD, "/proc/13169/ns/mnt", O_RDONLY) = 139
setns(139, CLONE_NEWNS) = 0
stat("/usr/bin/stress-ng", {st_mode=S_IFREG|0755, st_size=3065416, ...}) = 0
openat(AT_FDCWD, "/usr/bin/stress-ng", O_RDONLY) = 140
fcntl(140, F_GETFD) = 0
fstat(140, {st_mode=S_IFREG|0755, st_size=3065416, ...}) = 0
mmap(NULL, 3065416, PROT_READ, MAP_PRIVATE, 140, 0) = 0x7ff2fdc5b000
munmap(0x7ff2fdc5b000, 3065416) = 0
close(140) = 0
stat("stress-ng-0.07.29-10.fc31.x86_64.debug", 0x7fff45d71260) = -1 ENOENT (No such file or directory)
stat("/usr/bin/stress-ng-0.07.29-10.fc31.x86_64.debug", 0x7fff45d71260) = -1 ENOENT (No such file or directory)
stat("/usr/bin/.debug/stress-ng-0.07.29-10.fc31.x86_64.debug", 0x7fff45d71260) = -1 ENOENT (No such file or directory)
stat("/usr/lib/debug/usr/bin/stress-ng-0.07.29-10.fc31.x86_64.debug", 0x7fff45d71260) = -1 ENOENT (No such file or directory)
stat("/root/.debug/.build-id/f2/ed02c68341183a124b9b0f6e2e6c493c465b29", 0x7fff45d711e0) = -1 ENOENT (No such file or directory)
To only then go back to the "host" namespace to look just in the users's
~/.debug cache:
setns(137, CLONE_NEWNS) = 0
chdir("/root") = 0
close(137) = 0
close(139) = 0
stat("/root/.debug/.build-id/f2/ed02c68341183a124b9b0f6e2e6c493c465b29/elf", 0x7fff45d732e0) = -1 ENOENT (No such file or directory)
It continues to fail to resolve symbols:
# perf report | grep stress-ng | head -5
9.50% stress-ng-cpu stress-ng [.] 0x0000000000021ac1
8.58% stress-ng-cpu stress-ng [.] 0x0000000000021ab4
8.51% stress-ng-cpu stress-ng [.] 0x0000000000021489
7.17% stress-ng-cpu stress-ng [.] 0x00000000000219b6
3.93% stress-ng-cpu stress-ng [.] 0x0000000000021478
#
To overcome that we use:
# perf buildid-cache -v --add /usr/lib/debug/usr/bin/stress-ng-0.07.29-10.fc31.x86_64.debug
Adding f2ed02c68341183a124b9b0f6e2e6c493c465b29 /usr/lib/debug/usr/bin/stress-ng-0.07.29-10.fc31.x86_64.debug: Ok
#
# ls -la /root/.debug/.build-id/f2/ed02c68341183a124b9b0f6e2e6c493c465b29/elf
-rw-r--r--. 3 root root 2401184 Jul 27 07:03 /root/.debug/.build-id/f2/ed02c68341183a124b9b0f6e2e6c493c465b29/elf
# file /root/.debug/.build-id/f2/ed02c68341183a124b9b0f6e2e6c493c465b29/elf
/root/.debug/.build-id/f2/ed02c68341183a124b9b0f6e2e6c493c465b29/elf: ELF 64-bit LSB shared object, x86-64, version 1 (SYSV), dynamically linked, interpreter \004, BuildID[sha1]=f2ed02c68341183a124b9b0f6e2e6c493c465b29, for GNU/Linux 3.2.0, with debug_info, not stripped, too many notes (256)
#
Now it finally works:
# perf report | grep stress-ng | head -5
23.59% stress-ng-cpu stress-ng [.] ackermann
23.33% stress-ng-cpu stress-ng [.] is_prime
17.36% stress-ng-cpu stress-ng [.] stress_cpu_sieve
6.08% stress-ng-cpu stress-ng [.] stress_cpu_correlate
3.55% stress-ng-cpu stress-ng [.] queens_try
#
I'll make sure that it looks for the build-id keyed files in both the
"host" namespace (the namespace the user running 'perf record' was a the
time of the recording) and in the container namespace, as it shouldn't
matter where a content based key lookup finds the ELF file to use in
resolving symbols, etc.
Reported-by: Karl Rister <krister@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Krister Johansen <kjlx@templeofstupid.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Stanislav Fomichev <sdf@google.com>
Cc: Thomas-Mich Richter <tmricht@linux.vnet.ibm.com>
Fixes: 657ee55319 ("perf evlist: Introduce side band thread")
Link: https://lkml.kernel.org/n/tip-g79k0jz41adiaeuqud742t2l@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
So it's available for libperf's users.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20190828135717.7245-24-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Even more, to have a "perf_record_" prefix, so that they match the
PERF_RECORD_ enum they map to.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20190828135717.7245-23-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
So it's available for libperf's users.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20190828135717.7245-22-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Move the PERF_RECORD_COMPRESSED event definition to libperf's event.h.
In order to keep libperf simple, we switch 'u64/u32/u16/u8' types used
events to their generic '__u*' versions.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20190828135717.7245-21-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Move the PERF_RECORD_HEADER_FEATURE event definition to libperf's
event.h.
In order to keep libperf simple, we switch 'u64/u32/u16/u8' types used
events to their generic '__u*' versions.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20190828135717.7245-20-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Move the PERF_RECORD_TIME_CONV event definition to libperf's event.h.
In order to keep libperf simple, we switch 'u64/u32/u16/u8' types used
events to their generic '__u*' versions.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20190828135717.7245-19-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Move the PERF_RECORD_STAT_ROUND event definition to libperf's event.h.
In order to keep libperf simple, we switch 'u64/u32/u16/u8' types used
events to their generic '__u*' versions.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20190828135717.7245-18-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Move the PERF_RECORD_STAT event definition to libperf's event.h.
In order to keep libperf simple, we switch 'u64/u32/u16/u8' types used
events to their generic '__u*' versions.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20190828135717.7245-17-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Move the PERF_RECORD_STAT_CONFIG event definition to libperf's event.h.
In order to keep libperf simple, we switch 'u64/u32/u16/u8' types used
events to their generic '__u*' versions.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20190828135717.7245-16-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Move the PERF_RECORD_THREAD_MAP event definition to libperf's event.h.
In order to keep libperf simple, we switch 'u64/u32/u16/u8' types used
events to their generic '__u*' versions.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20190828135717.7245-15-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Move the PERF_RECORD_SWITCH event definition to libperf's event.h.
In order to keep libperf simple, we switch 'u64/u32/u16/u8' types used
events to their generic '__u*' versions.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20190828135717.7245-14-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Move the PERF_RECORD_ITRACE_START event definition to libperf's event.h.
In order to keep libperf simple, we switch 'u64/u32/u16/u8' types used
events to their generic '__u*' versions.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20190828135717.7245-13-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
