Commit graph

932,869 commits

Author SHA1 Message Date
Stanislaw Gruszka
7cf2442129 iwlwifi: use IWL_DEBUG_SCAN for debug scanning
Replace IWL_DEBUG_{INFO,HC,RC} to IWL_DEBUG_SCAN in iwl-scan.c file. Add
some more IWL_DEBUG_SCAN messages. This will allow to fully debug
scanning using only IWL_DL_SCAN flag.

Also start one message sentence with capital letter, since that
convention in iwl-scan.c file.

Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Acked-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-09-14 16:14:25 -04:00
Stanislaw Gruszka
74d81b259d iwlwifi: cleanup scan initiate check
Remove redundant checks and use iwl_is_ready_rf().

Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Acked-by: Wey-Yi W Guy <wey-yi.w.guy@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-09-14 16:14:25 -04:00
Stanislaw Gruszka
edeb78a7fa mac80211: wait for scan work complete before restarting hw
This is needed to avoid warning in ieee80211_restart_hw about hardware
scan in progress.

Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Acked-by: Wey-Yi W Guy <wey-yi.w.guy@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-09-14 16:14:25 -04:00
Stanislaw Gruszka
e7e16b90b4 iwlwifi: do not force complete scan too early
Currently we force scan complete at the end of iwl_scan_cancel_timeout
function. This cause race condition when we can get a new scan request
from mac80211 and complete it by iwl_bg_complete from older scan. Change
code to force scan complete only when really needed: device goes down,
interface is removed or scan timeout occurs.

Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Acked-by: Wey-Yi W Guy <wey-yi.w.guy@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-09-14 16:14:25 -04:00
Stanislaw Gruszka
6bd1758d97 iwlwifi: assure we complete scan in scan_abort and scan_check works
Assure we complete scan in mac80211 when we abort scanning (scan_abort
work) or scan timeout occurs (scan_check work). Currently
iwl_scan_cancel_timeout() procedure force scan finish in mac80211
at the end of timeout loop, so we can use it in proper work functions.

Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Acked-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-09-14 16:13:26 -04:00
Stanislaw Gruszka
f5354c17dc iwlwifi: force scan complete after timeout
If we do not get notification from hardware about scan complete, after
timeout do mac80211 scan completion anyway. This assure we end scan
in case of firmware hung.

Patch fix one of the causes of wdev_cleanup_work warning reported at
https://bugzilla.redhat.com/show_bug.cgi?id=593566

Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Acked-by: Wey-Yi W Guy <wey-yi.w.guy@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-09-14 16:13:26 -04:00
Chris Wilson
3f08e4ef80 agp/intel: Fix resume regression from 2d2430cf
On i915 [EeePCs] something scribles over the registers during suspend
and resume so we must save a copy of the PGETBL_CTL register programmed
by the BIOS and restore that upon resume.

Reported-by: Sitsofe Wheeler <sitsofe@yahoo.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2010-09-14 21:13:13 +01:00
Chris Wilson
b1c5b0f8cc agp/intel: Remove redundant setting of gtt_mappable_entries
Two calls enter, only one will leave.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2010-09-14 21:13:12 +01:00
Chris Wilson
819f3fb7fe drm/i915/sdvo: Propagate i2c error from switching DDC control bus.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2010-09-14 21:13:12 +01:00
Chris Wilson
9d1a903d4b drm/i915/sdvo: Tidy intel_sdvo_hdmi_sink_detect
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2010-09-14 21:13:11 +01:00
Chris Wilson
2b6efaa476 drm/i915: Remove unused intel_ringbuffer->ring_flag
This can always be re-added should somebody find a use...

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2010-09-14 21:13:00 +01:00
Chris Wilson
890f3359f7 drm/i915/i2c: Track the parent encoder rather than just the dev
The SDVO proxy i2c adapter wants to be able to use information stored in
the encoder, so pass that through intel_i2c rather than iterate over all
known encoders every time.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2010-09-14 21:08:36 +01:00
Chris Wilson
2cf34d7b7e drm/i915: Allow get_fence_reg() to be uninterruptible
As we currently may need to acquire a fence register during a modeset,
we need to be able to do so in an uninterruptible manner. So expose that
parameter to the callers of the fence management code.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2010-09-14 21:08:36 +01:00
Chris Wilson
48b956c5a8 drm/i915: Push pipelining of display plane flushes to the caller
This ensures that we do wait upon the flushes to complete if necessary
and avoid the visual tears, whilst enabling pipelined page-flips.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2010-09-14 21:08:35 +01:00
Stanislaw Gruszka
02d8c14b59 iwlwifi: rewrite scan completion
Assure (partially) we call ieee80211_scan_completed() only once when
scan was requested from mac80211.

Code path that first clear STATUS_SCANNING bit is responsible to call
ieee80211_scan_completed(). Before the call, we check if mac80211
really request the scan.

Still persist some cases when we behave wrong, that will be addressed
in the next patches.

Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Acked-by: Wey-Yi W Guy <wey-yi.w.guy@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-09-14 16:08:04 -04:00
Stanislaw Gruszka
e693a802f0 iwlwifi: rework iwl_scan_cancel_timeout
Since on timeout version of iwl_scan_cancel procedure we can sleep,
do not have to schedule abort_scan work to begin and perform scanning,
can do this directly. Also now, as we do not queue abort_scan from
restart work anymore, we can queue abort_scan to priv->workqueue.

Don't drop mutex when waiting for scan complete. Use STATUS_HW_SCAN bit
to check if scanning is currently pending, because STATUS_SCANNING will
be cleared only with priv->mutex taken.

Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Acked-by: Wey-Yi W Guy <wey-yi.w.guy@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-09-14 16:08:04 -04:00
Stanislaw Gruszka
cd44600fdd iwlwifi: report scan completion when abort fail
When we are not able to send abort command to firmware, notify mac80211
that we complete scan, as we will newer do it lately. Check for all
possible errors that low level sending command procedure does not check,
to assure we catch all failures cases.

Patch fix one of the causes of wdev_cleanup_work warning reported at
https://bugzilla.redhat.com/show_bug.cgi?id=593566

Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Acked-by: Wey-Yi W Guy <wey-yi.w.guy@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-09-14 16:08:04 -04:00
Stanislaw Gruszka
d745d472af iwlwifi: cancel scan when down the device
Always cancel scan when stooping device and scan is currently pending,
we should newer have scan running after down device.

To assure we start scan cancel from restart work we have to schedule
abort_scan to different workqueue than priv->workqueue.

Patch fix not cancel scanning when restarting firmware, what is
one of the causes of wdev_cleanup_work warning (together with permanent
network connection lost) reported at
https://bugzilla.redhat.com/show_bug.cgi?id=593566

Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Acked-by: Wey-Yi W Guy <wey-yi.w.guy@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-09-14 16:08:04 -04:00
Johannes Berg
d5926d9d6a iwlwifi: move scan completed flags handling
Move the scan completed flags handling so that we
can notify mac80211 about aborted scans with the
correct status. Also queue the scan_completed work
before the BT status update so that it won't see
the bits still set (unless a new scan was started
in which case that's fine.)

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Acked-by: Wey-Yi W Guy <wey-yi.w.guy@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-09-14 16:08:03 -04:00
Johannes Berg
3eecce527c iwlwifi: unify scan start checks
Rather than duplicating all the checks and even
in case of errors accepting the scan request
from mac80211, we can push the checks to the
caller and in all error cases reject the scan
request right away (rather than accepting and
then saying it was aborted).

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Acked-by: Wey-Yi W Guy <wey-yi.w.guy@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-09-14 16:08:03 -04:00
Johannes Berg
b5be3efc34 iwlwifi: remove unused conf variables
There are a number of conf variables that are
unused, remove them.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Acked-by: Wey-Yi W Guy <wey-yi.w.guy@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-09-14 16:08:03 -04:00
Steve deRosier
740c1aa3b0 mac80211: Fix dangling pointer in ieee80211_xmit
hdr pointer is left dangling after call to ieee80211_skb_resize. This
can cause guards around mesh path selection to fail.

Signed-off-by: Steve deRosier <steve@cozybit.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-09-14 16:08:03 -04:00
Bill Jordan
a1e567c83f nl80211: Uninitialized variable
There is a path in nl80211_set_wiphy where result is tested but
uninitialized.

I am hitting this path when I attempt:

sh# iw dev wlan0 set channel 10
command failed: Unknown error 1069727332 (-1069727332)

Signed-off-by: William Jordan <bjordan@rajant.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-09-14 16:08:03 -04:00
Nikitas Angelinas
942623166d net/wireless: use ARRAY_SIZE macro in radiotap.c
Replace sizeof(rtap_namespace_sizes) / sizeof(rtap_namespace_sizes[0])
with ARRAY_SIZE(rtap_namespace_sizes) in net/wireless/radiotap.c

Signed-off-by: Nikitas Angelinas <nikitasangelinas@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-09-14 16:05:57 -04:00
Nikitas Angelinas
bbce80e110 drivers/net/wireless/ath/ath9k: use ARRAY_SIZE macro in ani.c
Replace (sizeof(ofdm_level_table)/sizeof(ofdm_level_table[0]) with
ARRAY_SIZE(ofdm_level_table), and (sizeof(cck_level_table)/
sizeof(cck_level_table[0]) with ARRAY_SIZE(cck_level_table) in
drivers/net/wireless/ath/ath9k/ani.c

Signed-off-by: Nikitas Angelinas <nikitasangelinas@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-09-14 16:05:57 -04:00
Fabio Rossi
516c6e1f52 ath5k: avoid unneeded calibration error messages
Don't generate calibration errors messages when not needed.

Signed-off-by: Fabio Rossi <rossi.f@inwind.it>
Acked-by: Bruno Randolf <br1@einfach.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-09-14 16:05:56 -04:00
Helmut Schaa
65b7fc9747 rt2x00: fix oops in rt2x00lib_txdone with rt61pci
Fix a typo introduced in "rt2x00: Add helper function for reporting tx
status" that results in an oops in rt2x00lib_txdone.

Reported-by: Pavel Roskin <proski@gnu.org>
Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>
Acked-by: Gertjan van Wingerde <gwingerde@gmail.com>
Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-09-14 16:03:44 -04:00
Helmut Schaa
6646505de0 rt2x00: Enable missing interrupts in rt61pci
We're handling both, the CSR_BEACON_DONE and the CSR_TWAKEUP interrupts
in rt61pci. However, these interrupts are masked out by default. Fix
this.

Found via pure code inspection.

Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>
Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-09-14 16:03:44 -04:00
Helmut Schaa
93149cf87b rt2x00: Mask out unused interrupts in rt2800pci
We don't use all available interrupts in rt2800pci. Mask out all unused
interrupts to avoid waking up without having anything to do.

Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>
Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-09-14 16:03:44 -04:00
Helmut Schaa
0204464329 rt2x00: Check for specific changed flags when updating the erp config
Previously rt2x00 was always updating all erp related config variables
even though mac80211 might only have changed one. Hence, pass the
changed flags to the config_erp driver callback so that the driver
can limit the changes to the correct values.

This fixes an issue in AP mode where the beacon interval is not
initialized (and thus zero) but still sent to the hardware causing an
interrupt storm on rt2800pci hanging the system.

Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>
Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-09-14 16:03:43 -04:00
Helmut Schaa
47ee3eb135 rt2x00: Initialize AMPDU_BA_WINSIZE register
Since we're not using the AMPDU_BA_WINSIZE register to force the BlockAck
window size (we specify it in every TXWI) we should initialize it to 0.

Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>
Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-09-14 16:03:43 -04:00
Lars Ericsson
85f4d6488c rt2x00: Antenna diversity does not work in 2.6.35
The test if antenna diversity is at all enabled uses a local variable
'flags' to prepare the test condition, but uses 'ant->flags' when the test
is evaluated. The effect is that the diversity evaluation will never start.
I can see two solutions, use the 'flag' in the test condition or revert the
local flag change. My attached patch took alternative two.

Then the evaluation start but it will still not switch antenna. The problem
is a code section in rt2x00lib_config_antenna (). The effect of that code
section is that any change the diversity function perform will be
effectively shorten and no antenna selection command issued. The attached
patch will filter out any ANTENNA_SW_DIVERSITY setting but forward all
other

Signed-off-by: Lars Ericsson <lars_ericsson@telia.com>
Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-09-14 16:03:43 -04:00
Rajkumar Manoharan
58d7e0f37c ath9k_hw: Support fastcc for AR7010
To reduce scan time, enable fastcc for AR7010

(fastcc == fast channel change -- JWL)

Signed-off-by: Rajkumar Manoharan <rmanoharan@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-09-14 16:03:43 -04:00
Ohad Ben-Cohen
49063a0d0b wl1271: sdio: claim host only when doing IO
Do not maintain a persistent sdio_claim_host state. Instead,
claim host before doing IO and release host soon after.

This fixes several mmc deadlock scenarios, e.g. during
suspend/resume.

Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
Acked-by: Luciano Coelho <luciano.coelho@nokia.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-09-14 16:03:42 -04:00
Christian Lamparter
1d7e1e6b1b carl9170: Makefile, Kconfig files and MAINTAINERS
Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-09-14 16:03:42 -04:00
Christian Lamparter
00c4da27a4 carl9170: firmware parser and debugfs code
Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-09-14 16:03:42 -04:00
Christian Lamparter
a84fab3cbf carl9170: 802.11 rx/tx processing and usb backend
Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-09-14 16:03:42 -04:00
Christian Lamparter
319da621d5 carl9170: PHY/RF and MAC routines
Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-09-14 16:03:42 -04:00
Christian Lamparter
aae9af605a carl9170: Register maps, tx/rx descriptor formats and eeprom layout
Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-09-14 16:03:41 -04:00
Christian Lamparter
fe8ee9ad80 carl9170: mac80211 glue and command interface
Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-09-14 16:03:41 -04:00
Steven Rostedt
57c072c711 tracing: Fix reading of set_ftrace_filter across lists
If we do:

 # cd /sys/kernel/debug
 # echo 'do_IRQ:traceon schedule:traceon sys_write:traceon' > \
    set_ftrace_filter
 # cat set_ftrace_filter

We get the following output:

 #### all functions enabled ####
 sys_write:traceon:unlimited
 schedule:traceon:unlimited
 do_IRQ:traceon:unlimited

This outputs two lists. One is the fact that all functions are
currently enabled for function tracing, the other has three probed
functions, which happen to have 'traceon' as their commands.

Currently, when reading the first list (functions enabled) the
seq_file code will receive a "NULL" from the t_next() function
causing it to exit early. This makes "read()" from userspace stop
reading the code at this boarder. Although read is allowed to do this,
some (broken) applications might consider this an end of file and
stop early.

This patch adds the start of the second list to t_next() when it
finishes the first list. It is a simple change and gives the
set_ftrace_filter file nicer reading ability.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-09-14 15:14:20 -04:00
Steven Rostedt
98c4fd046f tracing: Keep track of set_ftrace_filter position and allow lseek again
This patch keeps track of the index within the elements of
set_ftrace_filter and if the position goes backwards, it nicely
resets and starts from the beginning again.

This allows for lseek and pread to work properly now.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-09-14 14:46:01 -04:00
Jason Cooper
ca8c1e5990 staging: brcm80211: fix "ERROR: do not use assignment in if condition"
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-09-14 09:04:07 -07:00
Jason Cooper
90ea22962c staging: brcm80211: fix "ERROR: return is not a function, paren..."
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-09-14 08:57:05 -07:00
Jason Cooper
a2627bc065 staging: brcm80211: fix "ERROR: open brace '{' following function dec..."
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-09-14 08:45:53 -07:00
Steven Rostedt
4aeb69672d tracing: Replace typecasted void pointer in set_ftrace_filter code
The set_ftrace_filter uses seq_file and reads from two lists. The
pointer returned by t_next() can either be of type struct dyn_ftrace
or struct ftrace_func_probe. If there is a bug (there was one)
the wrong pointer may be used and the reference can cause an oops.

This patch makes t_next() and friends only return the iterator structure
which now has a pointer of type struct dyn_ftrace and struct
ftrace_func_probe. The t_show() can now test if the pointer is NULL or
not and if the pointer exists, it is guaranteed to be of the correct type.

Now if there's a bug, only wrong data will be shown but not an oops.

Cc: Chris Wright <chrisw@sous-sol.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-09-14 11:42:30 -04:00
Steven Rostedt
2bccfffd15 tracing: Do not reset *pos in set_ftrace_filter
After the filtered functions are read, the probed functions are read
from the hash in set_ftrace_filter. When the hashed probed functions
are read, the *pos passed in is reset. Instead of modifying the pos
given to the read function, just record the pos where the filtered
functions ended and subtract from that.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-09-14 11:42:29 -04:00
Jason Cooper
7cc4a4c029 staging: brcm80211: fix 'ERROR: "foo * bar" should be "foo *bar"'
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-09-14 08:28:59 -07:00
Henry Ptasinski
29f6465fc8 staging: brcm80211: Fix URLs for firmware files.
Signed-off-by: Henry Ptasinski <henryp@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-09-14 08:25:15 -07:00
Andy Shevchenko
8dab24ce3e staging: brcm80211: use '%pM' format to print MAC address
Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: Nohee Ko <noheek@broadcom.com>
Cc: linux-wireless@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-09-14 08:25:15 -07:00