Commit graph

932,869 commits

Author SHA1 Message Date
Vasily Khoruzhick
81d9780283 ASoC: Add HP iPAQ RX1950 support
Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-08-31 13:25:17 +01:00
Vasily Khoruzhick
8614d310a2 ASoC: uda1380: make driver more powersave-friendly
Disable some codec modules in standby mode, completely disable
codec in off mode to save some power.
Fix suspend/resume: mark mixer regs as dirty on resume to
restore mixer values, otherwise driver produces no sound
(master is muted by default).

Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
Acked-by: Marek Vasut <marek.vasut@gmail.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-08-31 13:25:17 +01:00
Jarkko Nikula
4e48541676 ASoC: Swap bias level enumeration
Swapping the bias level enumeration is only meant to help debugging. It is
easier if number 0 means bias off and bigger number means bigger bias level.

Signed-off-by: Jarkko Nikula <jhnikula@gmail.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-08-31 13:06:40 +01:00
Manuel Lauss
ffc4fdbbe1 ASoC: fix au1x platform
This patch fixes up the au1x audio platform after the multi-component
merge:
- compile fixes and updates to get DB1200 platform audio working again,
- removal of global variables in AC97/I2S/DMA(PCM) modules.

The AC97 part is limited to one instance only for now due to issues
with getting at driver data in the soc_ac97_ops.

Signed-off-by: Manuel Lauss <manuel.lauss@googlemail.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-08-31 13:06:31 +01:00
Arnaud Lacombe
c94d3fb01f kbuild: use getopt_long(), not its _only() variant
NetBSD lacks getopt_long_only() whereas getopt_long() works just fine.

Signed-off-by: Arnaud Lacombe <lacombar@gmail.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2010-08-31 13:33:41 +02:00
Robert Richter
4cbe75be5c oprofile, arm: initialize perf_event pointers with NULL
The pointers must be NULL'ed to avoid double-freeing the pointers in
rare cases during reinitialization.

Signed-off-by: Robert Richter <robert.richter@amd.com>
2010-08-31 12:51:43 +02:00
Will Deacon
c7fd239a64 ARM: oprofile: fix and simplify init/exit functions
Now that oprofile_arch_exit is only called when the OProfile module
is unloaded, it can assume that init completed successfully and not
have to worry about double frees or releasing NULL perf events.

This patch ensures that oprofile_arch_init fails gracefully on ARM
and simplifies the exit code based on the above.

Cc: Robert Richter <robert.richter@amd.com>
Cc: Matt Fleming <matt@console-pimps.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Robert Richter <robert.richter@amd.com>
2010-08-31 11:49:07 +02:00
Will Deacon
979048e1f2 oprofile: don't call arch exit code from init code on failure
oprofile_init calls oprofile_arch_init to initialise the architecture-specific
backend code. If this backend code returns failure, oprofile_arch_exit is
called immediately, making it difficult to allocate and free resources
correctly.

This patch removes the oprofile_arch_exit call from oprofile_init,
meaning that all architectures must ensure that oprofile_arch_init
cleans up any mess it's made before returning an error. As far as
I can tell, this only affects the code for ARM.

Cc: Robert Richter <robert.richter@amd.com>
Cc: Matt Fleming <matt@console-pimps.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Robert Richter <robert.richter@amd.com>
2010-08-31 11:47:50 +02:00
Nicolas Palix
49ab7a3913 Coccinelle: Add misc/ifcol.cocci
Find confusingly indented code in or after an if.  An if branch should
be indented.  The code following an if should not be indented.
Sometimes, code after an if that is indented is actually intended to be
part of the if branch.

This has a high rate of false positives, because Coccinelle's column
calculation does not distinguish between spaces and tabs, so code that
is not visually aligned may be considered to be in the same column.

Signed-off-by: Nicolas Palix <npalix@diku.dk>
Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2010-08-31 11:43:13 +02:00
Nicolas Palix
033456e2c5 Coccinelle: Add misc/doubleinit.cocci
Find duplicate field initializations.  This has a high rate of false
positives due to #ifdefs, which Coccinelle is not aware of in a structure
initialization.

Signed-off-by: Nicolas Palix <npalix@diku.dk>
Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2010-08-31 11:43:13 +02:00
Nicolas Palix
be8fe9d451 Coccinelle: Move alloc directory into api directory
alloc contains various semantic patches related
to the allocation APIs

Signed-off-by: Nicolas Palix <npalix@diku.dk>
Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2010-08-31 11:43:13 +02:00
Nicolas Palix
77c272fb24 Coccinelle: Move resource_size.cocci to the api directory
Signed-off-by: Nicolas Palix <npalix@diku.dk>
Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2010-08-31 11:37:54 +02:00
Nicolas Palix
99d653d4bc Coccinelle: Move err_cast.cocci to the api directory
Signed-off-by: Nicolas Palix <npalix@diku.dk>
Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2010-08-31 11:37:54 +02:00
Nicolas Palix
034174598b Coccinelle: Add api/memdup_user
Use kmemdup_user rather than duplicating its implementation
This is a little bit restricted to reduce false positives

Signed-off-by: Nicolas Palix <npalix@diku.dk>
Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2010-08-31 11:37:54 +02:00
Nicolas Palix
0426a97c4b Coccinelle: Add api/memdup.cocci
Use kmemdup rather than duplicating its implementation

Signed-off-by: Nicolas Palix <npalix@diku.dk>
Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2010-08-31 11:37:54 +02:00
Nicolas Palix
998f552323 Coccinelle: Add api/kstrdup.cocci
Use kstrdup rather than duplicating its implementation

Signed-off-by: Nicolas Palix <npalix@diku.dk>
Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2010-08-31 11:37:53 +02:00
Nicolas Palix
43ba21b57a Coccinelle: Add free/kfree.cocci
Find a use after free.  Values of variables may imply that some
execution paths are not possible, resulting in false positives.
Another source of false positives are macros such as
SCTP_DBG_OBJCNT_DEC that do not actually evaluate their argument

Signed-off-by: Nicolas Palix <npalix@diku.dk>
Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2010-08-31 11:37:53 +02:00
Nicolas Palix
5c34050188 Coccinelle: Add iterators/list_entry_update.cocci
list_for_each_entry uses its first argument to get from one element of
the list to the next, so it is usually not a good idea to reassign it.
The first rule finds such a reassignment and the second rule checks
that there is a path from the reassignment back to the top of the loop.

Signed-off-by: Nicolas Palix <npalix@diku.dk>
Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2010-08-31 11:37:53 +02:00
Nicolas Palix
afc48a82fa Coccinelle: Add iterators/itnull.cocci
Many iterators have the property that the first argument is always bound
to a real list element, never NULL.  False positives arise for some
iterators that do not have this property, or in cases when the loop
cursor is reassigned.  The latter should only happen when the matched
code is on the way to a loop exit (break, goto, or return).

Signed-off-by: Nicolas Palix <npalix@diku.dk>
Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2010-08-31 11:37:53 +02:00
Nicolas Palix
4045159253 Coccinelle: Add iterators/fen.cocci
for_each_node iterators only exit normally when the loop cursor is
NULL, so there is no point to call of_node_put on the final value.

Signed-off-by: Nicolas Palix <npalix@diku.dk>
Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2010-08-31 11:37:53 +02:00
Nicolas Palix
54c056280e Coccinelle: Add locks/mini_lock.cocci
Find missing unlocks.  This semantic match considers the specific case
where the unlock is missing from an if branch, and there is a lock
before the if and an unlock after the if.  False positives are due to
cases where the if branch represents a case where the function is
supposed to exit with the lock held, or where there is some preceding
function call that releases the lock.

Signed-off-by: Nicolas Palix <npalix@diku.dk>
Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2010-08-31 11:37:53 +02:00
Nicolas Palix
8aa6273106 Coccinelle: Add locks/double_lock.cocci
Find double locks.  False positives may occur when some paths cannot
occur at execution, due to the values of variables, and when there is
an intervening function call that releases the lock.

Signed-off-by: Nicolas Palix <npalix@diku.dk>
Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2010-08-31 11:37:53 +02:00
Nicolas Palix
e105007c12 Coccinelle: Add locks/call_kern.cocci
Find functions that refer to GFP_KERNEL but are called with locks held.
The proposed change of converting the GFP_KERNEL is not necessarily the
correct one.  It may be desired to unlock the lock, or to not call the
function under the lock in the first place.

Signed-off-by: Nicolas Palix <npalix@diku.dk>
Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2010-08-31 11:37:53 +02:00
Nicolas Palix
7703692ef8 Coccinelle: Move deref_null.cocci to a more appropriate directory
deref_null.cocci is moved to the 'null' directory
which contains other null related rules.

Signed-off-by: Nicolas Palix <npalix@diku.dk>
Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2010-08-31 11:37:53 +02:00
Nicolas Palix
2e1e1605fc Coccinelle: Add null/kmerr.cocci
This semantic patch looks for kmalloc etc that are not followed by a
NULL check.  It only gives a report in the case where there is some
error handling code later in the function, which may be helpful
in determining what the error handling code for the call to kmalloc etc
should be.

Signed-off-by: Nicolas Palix <npalix@diku.dk>
Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2010-08-31 11:37:53 +02:00
Nicolas Palix
c75b81bffa Coccinelle: Add null/eno.cocci
The various basic memory allocation functions don't return ERR_PTR

Signed-off-by: Nicolas Palix <npalix@diku.dk>
Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2010-08-31 11:37:52 +02:00
Tejun Heo
9c37547ab6 workqueue: use zalloc_cpumask_var() for gcwq->mayday_mask
alloc_mayday_mask() was using alloc_cpumask_var() making
gcwq->mayday_mask contain garbage after initialization on
CONFIG_CPUMASK_OFFSTACK=y configurations.  This combined with the
previously fixed GCWQ_DISASSOCIATED initialization bug could make
rescuers fall into infinite loop trying to bind to an offline cpu.

Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: CAI Qian <caiqian@redhat.com>
2010-08-31 11:18:34 +02:00
Tejun Heo
477a3c33d1 workqueue: fix GCWQ_DISASSOCIATED initialization
init_workqueues() incorrectly marks workqueues for all possible CPUs
associated.  Combined with mayday_mask initialization bug, this can
make rescuers keep trying to bind to an offline gcwq indefinitely.
Fix init_workqueues() such that only online CPUs have their gcwqs have
GCWQ_DISASSOCIATED cleared.

Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: CAI Qian <caiqian@redhat.com>
2010-08-31 10:54:35 +02:00
Robert Richter
10f0412f57 oprofile, x86: fix init_sysfs error handling
On failure init_sysfs() might not properly free resources. The error
code of the function is not checked. And, when reinitializing the exit
function might be called twice. This patch fixes all this.

Cc: stable@kernel.org
Signed-off-by: Robert Richter <robert.richter@amd.com>
2010-08-31 10:26:26 +02:00
Ingo Molnar
daab7fc734 Merge commit 'v2.6.36-rc3' into x86/memblock
Conflicts:
	arch/x86/kernel/trampoline.c
	mm/memblock.c

Merge reason: Resolve the conflicts, update to latest upstream.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-08-31 09:45:46 +02:00
Naohiro Aota
1458ce166c idr: describe how nextidp works in idr_get_next().
It was unclear in original kernel-doc how nextidp worked in
idr_get_next(). Let's describe it.

Signed-off-by: Naohiro Aota <naota@elisp.net>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-08-31 09:43:59 +02:00
Naohiro Aota
ea24ea850b idr: fix kernel-doc warnings.
Fix the following kernel-doc warnings.

% perl scripts/kernel-doc lib/idr.c > /dev/null
Warning(lib/idr.c:300): No description found for parameter 'starting_id'
Warning(lib/idr.c:300): Excess function parameter 'start_id' description in 'idr_get_new_above'
Warning(lib/idr.c:485): No description found for parameter 'idp'
Warning(lib/idr.c:596): No description found for parameter 'nextidp'
Warning(lib/idr.c:596): Excess function parameter 'id' description in 'idr_get_next'
Warning(lib/idr.c:774): No description found for parameter 'starting_id'
Warning(lib/idr.c:774): Excess function parameter 'staring_id' description in 'ida_get_new_above'
Warning(lib/idr.c:918): No description found for parameter 'ida'

Signed-off-by: Naohiro Aota <naota@elisp.net>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-08-31 09:32:02 +02:00
Konrad Rzeszutek Wilk
7ac41ccf47 x86, iommu: Fix IOMMU_INIT alignment rules
This boot crash was observed:

 DMA-API: preallocated 32768 debug entries
 DMA-API: debugging enabled by kernel config
 BUG: unable to handle kernel paging request at 19da8955
 IP: [<f4ffffff>] 0xf4ffffff
 *pde = 00000000

The crux of the failure was that even if we did not use any
of the .iommu_table section, the linker would still insert it
in the vmlinux file. This patch fixes that and also fixes the
runtime crash where we would try to access the array.

Reported-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Joerg Roedel <joerg.roedel@amd.com>
Cc: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
LKML-Reference: <1283191802-25086-1-git-send-email-konrad.wilk@oracle.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-08-31 08:06:10 +02:00
David S. Miller
1f0f638856 stmmac: Fix build warnings.
In file included from drivers/net/stmmac/stmmac_ethtool.c:30:
drivers/net/stmmac/stmmac.h:111: warning: 'struct platform_device' declared inside parameter list
drivers/net/stmmac/stmmac.h:111: warning: its scope is only this definition or declaration, which is probably not what you want
drivers/net/stmmac/stmmac_main.c: In function 'stmmac_dvr_probe':
drivers/net/stmmac/stmmac_main.c:1744: warning: cast from pointer to integer of different size
In file included from drivers/net/stmmac/stmmac_mdio.c:31:
drivers/net/stmmac/stmmac.h:111: warning: 'struct platform_device' declared inside parameter list
drivers/net/stmmac/stmmac.h:111: warning: its scope is only this definition or declaration, which is probably not what you want
drivers/net/stmmac/dwmac1000_core.c: In function 'dwmac1000_dump_regs':
drivers/net/stmmac/dwmac1000_core.c:56: warning: cast from pointer to integer of different size

Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-30 21:55:17 -07:00
Matthew Garrett
b137b9942a ACPI: Don't report current_now if battery reports in mWh
ACPI batteries can report in units of either current or energy. Right
now we expose the current_now file even if the battery is reporting
energy units, resulting in a file that should contain mA instead
containing mW. Don't expose this value unless the battery is reporting
current.

Signed-off-by: Matthew Garrett <mjg@redhat.com>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Acked-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2010-08-31 00:00:47 -04:00
David S. Miller
628e300ccc irda: Correctly clean up self->ias_obj on irda_bind() failure.
If irda_open_tsap() fails, the irda_bind() code tries to destroy
the ->ias_obj object by hand, but does so wrongly.

In particular, it fails to a) release the hashbin attached to the
object and b) reset the self->ias_obj pointer to NULL.

Fix both problems by using irias_delete_object() and explicitly
setting self->ias_obj to NULL, just as irda_release() does.

Reported-by: Tavis Ormandy <taviso@cmpxchg8b.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-30 18:37:56 -07:00
Michael Neuling
54a8340433 powerpc: Don't use kernel stack with translation off
In f761622e59 we changed
early_setup_secondary so it's called using the proper kernel stack
rather than the emergency one.

Unfortunately, this stack pointer can't be used when translation is off
on PHYP as this stack pointer might be outside the RMO.  This results in
the following on all non zero cpus:
  cpu 0x1: Vector: 300 (Data Access) at [c00000001639fd10]
      pc: 000000000001c50c
      lr: 000000000000821c
      sp: c00000001639ff90
     msr: 8000000000001000
     dar: c00000001639ffa0
   dsisr: 42000000
    current = 0xc000000016393540
    paca    = 0xc000000006e00200
      pid   = 0, comm = swapper

The original patch was only tested on bare metal system, so it never
caught this problem.

This changes __secondary_start so that we calculate the new stack
pointer but only start using it after we've called early_setup_secondary.

With this patch, the above problem goes away.

Signed-off-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-08-31 11:35:13 +10:00
Paul Mackerras
b0d278b7d3 powerpc/perf_event: Reduce latency of calling perf_event_do_pending
Commit 0fe1ac48 ("powerpc/perf_event: Fix oops due to
perf_event_do_pending call") moved the call to perf_event_do_pending
in timer_interrupt() down so that it was after the irq_enter() call.
Unfortunately this moved it after the code that checks whether it
is time for the next decrementer clock event.  The result is that
the call to perf_event_do_pending() won't happen until the next
decrementer clock event is due.  This was pointed out by Milton
Miller.

This fixes it by moving the check for whether it's time for the
next decrementer clock event down to the point where we're about
to call the event handler, after we've called perf_event_do_pending.

This has the side effect that on old pre-Core99 Powermacs where we
use the ppc_n_lost_interrupts mechanism to replay interrupts, a
replayed interrupt will incur a little more latency since it will
now do the code from the irq_enter down to the irq_exit, that it
used to skip.  However, these machines are now old and rare enough
that this doesn't matter.  To make it clear that ppc_n_lost_interrupts
is only used on Powermacs, and to speed up the code slightly on
non-Powermac ppc32 machines, the code that tests ppc_n_lost_interrupts
is now conditional on CONFIG_PMAC as well as CONFIG_PPC32.

Signed-off-by: Paul Mackerras <paulus@samba.org>
Cc: stable@kernel.org
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-08-31 11:35:13 +10:00
Matthew McClintock
4562c986f0 powerpc/kexec: Adds correct calling convention for kexec purgatory
Call kexec purgatory code correctly. We were getting lucky before.
If you examine the powerpc 32bit kexec "purgatory" code you will
see it expects the following:

>From kexec-tools: purgatory/arch/ppc/v2wrap_32.S
-> calling convention:
->   r3 = physical number of this cpu (all cpus)
->   r4 = address of this chunk (master only)

As such, we need to set r3 to the current core, r4 happens to be
unused by purgatory at the moment but we go ahead and set it
here as well

Signed-off-by: Matthew McClintock <msm@freescale.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-08-31 11:35:12 +10:00
Krzysztof Halasa
921a86e0e3 Staging: Add SBE 2T3E3 WAN driver
This is a driver for SBE Inc.'s dual port T3/E3 WAN cards. Based on
their original GPLed driver.

The original driver tarball is now accessible at
http://userweb.kernel.org/~chris/SBE_2T3_Linux_2.0c.tgz

It needs at least a new generic HDLC setup code (not yet written) before
moving to drivers/net/wan.

Signed-off-by: Krzysztof Hałasa <khc@pm.waw.pl>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-30 17:36:50 -07:00
Greg Kroah-Hartman
b0b5763308 Staging: westbridge: mark BROKEN as it doesn't currently build properly
Future patches should fix this up.

Cc: David Cross <david.cross@cypress.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-30 17:29:22 -07:00
David Cross
81eb669b95 Staging: add West Bridge Astoria Driver
This is a driver for the Cypress West Bridge companion chip. Its
function is analogous to the North/South Bridges of PC environments
applied to embedded devices, in that it expands I/O and storage
capabilities of an embedded processor. The Astoria version, which this
driver applies to, functions as a USB, embedded memory and SDIO
controller. The kernel that this patch was applied to is linux-2.6.35,
although it was tested using the android kernel 2.6.29 running on the
Zoom 2 platform. In this system, it was used primarily as a sideloading
accelerator enabling direct data transfers between a USB host PC and
embedded memory without system overheads.  Minor modifications were also
made to the kernel for this patch. These include changes such as
EXPORTing of fat_get_block in the kernel code. Another function,
mpage_cleardirty was also added to the memory management code. This
function is used to clear the dirty pages from a specific inode. This
allows for direct, file based DMA. None of these changes are believed to
have any negative impact on the kernel and may provide additional
benefit for other developers and drivers.

The driver, as submitted, was placed into the drivers/staging/westbridge
folder as the directory structure it will eventually reside in is not yet
defined. The driver, as placed in staging is divided into four parts:
1) gadget - this implements a gadget peripheral controller and includes IOCTLs
for MTP transfers
2) block -this implements a generic block device driver to enable access to
embedded memory
3) api -this is the Cypress SDK, and includes USB and Storage specific
functions. In addition, it includes common code for low level routines such as
message passing and common data transfer routines
4) hal - this should likely be included in the arch directory as it needs to
be modified for a given platform. The directory structure in the staging area
is meant to reflect the eventual location of where this code likely should be.
It is platform specific. In this case, the HAL included is for the Android
Zoom 2 platform. Here, West Bridge is connected to the GPMC (general purpose
memory controller) of the OMAP3. Specific timing needs to be enabled to ensure
reliable communication.
Many thanks to Greg KH for conducting initial reviews and providing pointers.
Please contact david.cross@cypress.com for questions, concerns or feedback.

Signed-off-by: David Cross <david.cross@cypress.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-30 17:20:53 -07:00
Greg Kroah-Hartman
760ffce8ab Staging: delete rtl8192su driver
Now that we have a much better driver for this device (rtl8712), delete
this driver as it is no longer needed.

Cc: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-30 16:29:56 -07:00
Eric Dumazet
3ff2cfa55f ipv6: struct xfrm6_tunnel in read_mostly section
tunnel6_handlers chain being scanned for each incoming packet,
make sure it doesnt share an often dirtied cache line.

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-30 13:50:46 -07:00
Eric Dumazet
6dcd814bd0 net: struct xfrm_tunnel in read_mostly section
tunnel4_handlers chain being scanned for each incoming packet,
make sure it doesnt share an often dirtied cache line.

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-30 13:50:45 -07:00
Geert Uytterhoeven
c274f29120 net/m68k: Hydra Ethernet - print whole resource instead of start address
resource_size_t changed from `unsigned long' to `phys_addr_t`, which is either
`u32' or `u64'.
Print the whole resource to remove the cast and to make it future-proof.

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-30 13:50:45 -07:00
Gerrit Renker
3d5b99ae82 TCP: update initial windows according to RFC 5681
This updates the use of larger initial windows, as originally specified in
RFC 3390, to use the newer IW values specified in RFC 5681, section 3.1.

The changes made in RFC 5681 are:
 a) the setting now is more clearly specified in units of segments (as the
    comments  by John Heffner emphasized, this was not very clear in RFC 3390);
 b) for connections with 1095 < SMSS <= 2190 there is now a change:
    - RFC 3390 says that IW <= 4380,
    - RFC 5681 says that IW = 3 * SMSS <= 6570.

Since RFC 3390 is older and "only" proposed standard, whereas the newer RFC 5681
is already draft standard, it seems preferable to use the newer IW variant.

Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-30 13:50:44 -07:00
Gerrit Renker
89858ad143 dccp ccid-3: use per-route RTO or TCP RTO as fallback
This makes RTAX_RTO_MIN also available to CCID-3, replacing the compile-time
RTO lower bound with a per-route tunable value.

The original Kconfig option solved the problem that a very low RTT (in the
order of HZ) can trigger too frequent and unnecessary reductions of the
sending rate.

This tunable does not affect the initial RTO value of 2 seconds specified in
RFC 5348, section 4.2 and Appendix B. But like the hardcoded Kconfig value,
it allows to adapt to network conditions.

The same effect as the original Kconfig option of 100ms is now achieved by

> ip route replace to unicast 192.168.0.0/24 rto_min 100j dev eth0

(assuming HZ=1000).

Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-30 13:45:28 -07:00
Gerrit Renker
4886fcad6e dccp ccid-2: Share TCP's minimum RTO code
Using a fixed RTO_MIN of 0.2 seconds was found to cause problems for CCID-2
over 802.11g: at least once per session there was a spurious timeout. It
helped to then increase the the value of RTO_MIN over this link.

Since the problem is the same as in TCP, this patch makes the solution from
commit "05bb1fad1c"
       "[TCP]: Allow minimum RTO to be configurable via routing metrics."
available to DCCP.

This avoids reinventing the wheel, so that e.g. the following works in the
expected way now also for CCID-2:

> ip route change 10.0.0.2 rto_min 800 dev ath0

Luckily this useful rto_min function was recently moved to net/tcp.h,
which simplifies sharing code originating from TCP.

Documentation also updated (plus minor whitespace fixes).

Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-30 13:45:27 -07:00
Gerrit Renker
22b71c8f4f tcp/dccp: Consolidate common code for RFC 3390 conversion
This patch consolidates initial-window code common to TCP and CCID-2:
 * TCP uses RFC 3390 in a packet-oriented manner (tcp_input.c) and
 * CCID-2 uses RFC 3390 in packet-oriented manner (RFC 4341).

Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-30 13:45:26 -07:00