Commit graph

932,869 commits

Author SHA1 Message Date
Magnus Damm
8d099d4446 serial: sh-sci: fix SH-Mobile SH breakage
The follwing commit breaks SH-Mobile on non-ARM platforms:
"8a77b8d serial: sh-sci: Support ARM-based SH-Mobile CPUs."

The commit assumed that CONFIG_ARCH_SHMOBILE only was set
on ARM platforms, but it turns out that this kconfig is also
set by all SH-based SoCs. Sh7724 and other older SH-Mobile
SoCs are all broken without this fix.

This patch converts the "defined(CONFIG_ARCH_SHMOBILE)" into
one "defined()" per SoC model - similar to existing SH code.

Reported-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-03-23 13:23:15 +09:00
Rafael J. Wysocki
bf02bd2590 ACPI / ACPICA: Do not check reference counters in acpi_ev_enable_gpe()
acpi_ev_enable_gpe() should enable the GPE at the hardware level
regardless of the value of the GPE's runtime reference counter.

There are only two callers of acpi_ev_enable_gpe(), acpi_enable_gpe()
and acpi_set_gpe().  The first one checks the GPE's runtime
reference counter itself and only calls acpi_ev_enable_gpe() if it's
equal to one, and the other one is supposed to enable the GPE
unconditionally (if called with ACPI_GPE_ENABLE).

This change fixes the problem in acpi_enable_wakeup_device() where
the GPE will not be enabled for wakeup if it's runtime reference
counter is zero, which is a regression from 2.6.33.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Reported-by: Robert Moore <robert.moore@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2010-03-23 00:22:49 -04:00
Kuninori Morimoto
67eaa3e4fb sh: Add watch-dog register address for SH7722/SH7723/SH7724
Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-03-23 13:19:36 +09:00
Kuninori Morimoto
bec9fb072f sh: ms7724: Add tiny-document for sound
Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-03-23 13:19:34 +09:00
Kuninori Morimoto
b230eb32c8 sh: mach-ecovec24: Add i2c_put_adapter on sh_eth_init
i2c_put_adapter is needed after i2c_get_adapter

Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-03-23 13:19:31 +09:00
Zhang Rui
bc73675b99 ACPI: fixes a false alarm from lockdep
fixes a false alarm from lockdep, as acpi hotplug workqueue waits other
workqueues.
http://bugzilla.kernel.org/show_bug.cgi?id=14553
https://bugzilla.kernel.org/show_bug.cgi?id=15521

Original-patch-from: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2010-03-23 00:17:25 -04:00
Zhang Rui
1ee4d61fd9 ACPI dock: support multiple ACPI dock devices
There may be multiple ACPI dock devices exist in ACPI namespace
and we should probe all of them.
http://bugzilla.kernel.org/show_bug.cgi?id=15521

CC: Li Shaohua <shaohua.li@intel.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2010-03-23 00:16:50 -04:00
Eric W. Biederman
688328c7ec netxen: The driver doesn't work on NX_P3_B1 so cause probe to fail.
I haven't been able to get link up on a NX_P3_B1 since 2.6.31.  The
driver complains about a firmware hang instead.  When I asked I was
told rev 0x41 was a preproduction rev.  So disable support in the
driver so no one is surprised the code doesn't work.

Signed-off-by: Eric W. Biederman <ebiederm@aristanetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-22 20:32:38 -07:00
Tom Goff
7316ae88c4 net_sched: make traffic control network namespace aware
Mostly minor changes to add a net argument to various functions and
remove initial network namespace checks.

Make /proc/net/psched per network namespace.

Signed-off-by: Tom Goff <thomas.goff@boeing.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-22 20:26:25 -07:00
Joe Perches
300bc06024 ixgbevf: Message formatting fixup
Commit 29b8dd024b
left a trailing ", " after a message.
Fix it and make the text used a bit smaller when DEBUG is #defined

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-22 20:08:04 -07:00
Amerigo Wang
5fc05f8764 netpoll: warn when there are spaces in parameters
v2: update according to Frans' comments.

Currently, if we leave spaces before dst port,
netconsole will silently accept it as 0. Warn about this.

Also, when spaces appear in other places, make them
visible in error messages.

Signed-off-by: WANG Cong <amwang@redhat.com>
Cc: David Miller <davem@davemloft.net>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-22 20:05:45 -07:00
Mike Frysinger
21afc27c9f can: bfin_can: switch to common Blackfin can header
The MMR bits are being moved to this header, so include it.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Acked-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-22 20:05:45 -07:00
David S. Miller
91c030b4d6 Merge branch 'master' of /home/davem/src/GIT/linux-2.6/ 2010-03-22 20:05:26 -07:00
JosephChan@via.com.tw
4f1deba435 pata_via: Add VIA VX900 support
Signed-off-by: Joseph Chan <josephchan@via.com.tw>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2010-03-22 22:44:17 -04:00
Dan Carpenter
38013262c2 korina: use resource_size()
This size calculation is wrong.  It should be end - start + 1.
Use resource_size() to calculate it correctly.

Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-22 18:33:11 -07:00
Jiri Pirko
3e4aa12f8a ipoib: remove addrlen check for mc addresses
Finally this bit can be removed. Currently, after the bonding driver is
changed/fixed (32a806c194 net-next-2.6),
that's not possible for an addr with different length than dev->addr_len
to be present in list. Removing this check as in new mc_list there will be
no addrlen in the record.

Signed-off-by: Jiri Pirko <jpirko@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-22 18:33:11 -07:00
Dan Carpenter
664ffe80c0 ewrk3: range checking problem
The range checking here is wrong.  It should be HASH_TABLE_LEN which
is 512.

Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-22 18:33:10 -07:00
Amerigo Wang
ecbacf8da7 netconsole: do not depend on experimental
Nowadays, most distributions enable netconsole by default,
including RHEL, Fedora, Debian, Arch, Opensuse. And
we don't have any bug reports about it. So I think there
is no need to mark it as experimental any more.

Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: WANG Cong <amwang@redhat.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Matt Mackall <mpm@selenic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-22 18:33:10 -07:00
Dan Carpenter
7c5365bca3 stmmac: use resource_size()
The size calculation is not correct.  It should be end - start + 1.
Use resource_size() to calculate it instead.

Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-22 18:33:10 -07:00
Alexander Duyck
d2ba2ed8fe igb: add support for Intel I350 Gigabit Network Connection
This patch adds support for the the I350 Gigabit network connection which
is the follow-on part to the 82580.

Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
CC: James Hearn <james.r.hearn@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-22 18:30:05 -07:00
Alexander Duyck
52a1dd4d15 igb: cleanup usage of virtualization registers
The igb driver was incorrectly attempting to write to registers that do not
exist on 82580 hardware.  This wasn't causing any issues that I can tell,
but it is not recommended behavior either so I have changed this so we are
determining which registers to write to based on mac type.

Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-22 18:30:04 -07:00
Alexander Duyck
411f557c3a igb: Do not overwrite mdicnfg register when accessing 82580 phy
This change removes the extra configuration we were doing on the mdicnfg
register which should be set by EEPROM and which we should not need to
write again afterwards.  This code was a holdover from some earlier
development work that was being done on a board with an incomplete EEPROM
and is no longer needed now that the production EEPROMs are in place.

Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-22 18:30:04 -07:00
David S. Miller
33e2bf6aa1 Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6
Conflicts:
	Documentation/feature-removal-schedule.txt
	drivers/net/wireless/ath/ath5k/phy.c
2010-03-22 18:15:15 -07:00
Tom Herbert
e880eb6c5c rps: Fix build with CONFIG_SYSFS enabled
Fix build with CONFIG_SYSFS not enabled.

Signed-off-by: Tom Herbert <therbert@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-22 18:06:47 -07:00
Tony Lindgren
b3c7740a12 Merge branch 'omap-fixes-for-tony' of git://dev.omapzoom.org/pub/scm/saaguirre/linux-omap-camera into omap-fixes-for-linus 2010-03-22 14:06:38 -07:00
Arnaldo Carvalho de Melo
4ded2b250f perf report: Implement Newt callgraphs
Starts collapsed, allows annotating by pressing 'A' or 'a' on
the symbol, be it the top level one or any of the symbols in the
chains.

It (ab)uses the only tree widget in newt, that is actually a
checkbox tree that we use with just one option ('.'), end result
is usable but we really need to create a custom widget tree so
that we can use the data structures we have (hist_entry rb_tree
+ callchain rb_tree + lists), so that we reduce the memory
footprint by not creating a mirror set of data structures in the
newtCheckboxTree widget.

Thanks to Frédéric Weisbacker for fixing the orphanage problem
in 301fde2, without that we were tripping a newt bug (fix
already sent to newt's maintainer).

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Avi Kivity <avi@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1269291169-29820-1-git-send-email-acme@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-03-22 21:58:08 +01:00
Linus Torvalds
ae6be51ed0 Fix up prototype for sys_ipc breakage
Commit 45575f5a42 ("ppc64 sys_ipc breakage in 2.6.34-rc2") fixed the
definition of the sys_ipc() helper, but didn't fix the prototype in
<linux/syscalls.h>

Reported-and-tested-by: Andreas Schwab <schwab@linux-m68k.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-22 13:12:33 -07:00
Wolfram Sang
8b4709ecea regulator: fix dangling pointers
Fix I2C-drivers which missed setting clientdata to NULL before freeing the
structure it points to. Also fix drivers which do this _after_ the structure
was freed already.

Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Cc: Liam Girdwood <lrg@slimlogic.co.uk>
Cc: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-03-22 19:46:16 +00:00
Axel Lin
451a73cd46 lp3971: Fix BUCK_VOL_CHANGE_SHIFT logic
Given x=0,1,2, current implementation of BUCK_VOL_CHANGE_SHIFT(x) returns 0,4,8.
The correct return value should be 0,4,6.
This patch fix the logic.

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Acked-by: Marek Szyprowski <m.szyprowski@samsung.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-03-22 19:44:45 +00:00
Axel Lin
cdb868f581 lp3971: Fix setting val for LDO2 and LDO4
In lp3971_ldo_set_voltage function, it requires val to left shift 4
bits for LDO2 and LDO4.
This patch fix this issue.

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Acked-by: Marek Szyprowski <m.szyprowski@samsung.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-03-22 19:44:44 +00:00
Ameya Palande
4f26a2abe1 regulator: Get rid of lockdep warning
WARNING: at kernel/lockdep.c:2706 sysfs_add_file_mode+0x4c/0xa8()

Difference between v1 and v2:
Moved sysfs_attr_init() call as first one to access the structure.

Signed-off-by: Ameya Palande <ameya.palande@nokia.com>
CC: Liam Girdwood <lrg@slimlogic.co.uk>
CC: Mark Brown <broonie@opensource.wolfsonmicro.com>
CC: David Brownell <dbrownell@users.sourceforge.net>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-03-22 19:44:44 +00:00
Dan Carpenter
67e46f347e regulator: handle kcalloc() failure
Return -ENOMEM if kcalloc() fails

Signed-off-by: Dan Carpenter <error27@gmail.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-03-22 19:44:44 +00:00
Dmitry Torokhov
3fff6c04d8 Regulators: max8925-regulator - clean up driver data after removal
It is a good tone to reset driver data after unbinding the device.
Also change find_regulator_info() fro inline to __devinit - let compiler
figure out if it wants it to be inlined or not.

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-03-22 19:44:44 +00:00
Jeff Layton
91885258e8 nfsd: don't break lease while servicing a COMMIT
This is the second attempt to fix the problem whereby a COMMIT call
causes a lease break and triggers a possible deadlock.

The problem is that nfsd attempts to break a lease on a COMMIT call.
This triggers a delegation recall if the lease is held for a delegation.
If the client is the one holding the delegation and it's the same one on
which it's issuing the COMMIT, then it can't return that delegation
until the COMMIT is complete. But, nfsd won't complete the COMMIT until
the delegation is returned. The client and server are essentially
deadlocked until the state is marked bad (due to the client not
responding on the callback channel).

The first patch attempted to deal with this by eliminating the open of
the file altogether and simply had nfsd_commit pass a NULL file pointer
to the vfs_fsync_range. That would conflict with some work in progress
by Christoph Hellwig to clean up the fsync interface, so this patch
takes a different approach.

This declares a new NFSD_MAY_NOT_BREAK_LEASE access flag that indicates
to nfsd_open that it should not break any leases when opening the file,
and has nfsd_commit set that flag on the nfsd_open call.

For now, this patch leaves nfsd_commit opening the file with write
access since I'm not clear on what sort of access would be more
appropriate.

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Cc: stable@kernel.org
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2010-03-22 15:37:53 -04:00
Arnaldo Carvalho de Melo
478b0973bf perf tools: Exit browser before printing usage when unkown option passed
If not the screen will get garbled when using newt.

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1269274229-20442-5-git-send-email-acme@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-03-22 18:47:36 +01:00
Arnaldo Carvalho de Melo
084ab9f862 perf stat: Better report failure to collect system wide stats
Before:

[acme@doppio linux-2.6-tip]$ perf stat -a sleep 1s

 Performance counter stats for 'sleep 1s':

  <not counted>  task-clock-msecs
  <not counted>  context-switches
  <not counted>  CPU-migrations
  <not counted>  page-faults
  <not counted>  cycles
  <not counted>  instructions
  <not counted>  branches
  <not counted>  branch-misses
  <not counted>  cache-references
  <not counted>  cache-misses

    1.016998463  seconds time elapsed

[acme@doppio linux-2.6-tip]$

Now:

[acme@doppio linux-2.6-tip]$ perf stat -a sleep 1s
No permission to collect system-wide stats.
Consider tweaking /proc/sys/kernel/perf_event_paranoid.
[acme@doppio linux-2.6-tip]$

Reported-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1269274229-20442-4-git-send-email-acme@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-03-22 18:47:35 +01:00
Masami Hiramatsu
ca721e45b3 perf probe: Add NO_DWARF make option
Add NO_DWARF make option for testing build without libdw.

Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <1269274229-20442-3-git-send-email-acme@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-03-22 18:47:35 +01:00
Masami Hiramatsu
4b4da7f766 perf probe: Cleanup debuginfo related code
Cleanup debuginfo related code to eliminate fragile code which
pointed by Ingo (Thanks!).
1) Invert logic of NO_DWARF_SUPPORT to DWARF_SUPPORT.
2) For removing assymetric/local variable ifdefs, introduce
  more helper functions.
3) Change options order to reduce the number of ifdefs.

Reported-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <1269274229-20442-2-git-send-email-acme@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-03-22 18:47:35 +01:00
Arnaldo Carvalho de Melo
f3a1f0ea94 perf newt: Properly restore the screen when error exiting
Show an OK message box with the last message sent via pr_err,
etc.

Reported-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1269274229-20442-1-git-send-email-acme@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-03-22 18:47:34 +01:00
Frederic Weisbecker
301fde27c7 perf: Fix orphan callchain branches
Callchains have markers inside their capture to tell we
enter a context (kernel, user, ...).

Those are not displayed in the callchains but they are
incidentally an active part of the radix tree where
callchains are stored, just like any other address.

If we have the two following callchains:

addr1 -> addr2 -> user context -> addr3
addr1 -> addr2 -> user context -> addr4
addr1 -> addr2 -> addr 5

This is pretty common if addr1 and addr2 are part of an
interrupt path, addr3 and addr4 are user addresses and
addr5 is a kernel non interrupt path.

This will be stored as follows in the tree:

                   addr1
                   addr2
                   /   \
                  /     addr5
            user context
               /    \
             addr3  addr4

But we ignore the context markers in the report, hence
the addr3 and addr4 will appear as orphan branches:

    |--28.30%-- hrtimer_interrupt
    |          smp_apic_timer_interrupt
    |          apic_timer_interrupt
    |          |           <------------- here, no parent!
    |          |          |
    |          |          |--11.11%-- 0x7fae7bccb875
    |          |          |
    |          |          |--11.11%-- 0xffffffffff60013b
    |          |          |
    |          |          |--11.11%-- __pthread_mutex_lock_internal
    |          |          |
    |          |          |--11.11%-- __errno_location

Fix this by removing the context markers when we process the
callchains to the tree.

Reported-by: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <1269274173-20328-1-git-send-email-acme@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-03-22 18:47:34 +01:00
Ingo Molnar
d2f1e15b66 Merge commit 'v2.6.34-rc2' into perf/core
Merge reason: Pick up latest perf fixes from upstream.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-03-22 18:47:01 +01:00
Patrick McHardy
ef1691504c netfilter: xt_recent: fix regression in rules using a zero hit_count
Commit 8ccb92ad (netfilter: xt_recent: fix false match) fixed supposedly
false matches in rules using a zero hit_count. As it turns out there is
nothing false about these matches and people are actually using entries
with a hit_count of zero to make rules dependant on addresses inserted
manually through /proc.

Since this slipped past the eyes of three reviewers, instead of
reverting the commit in question, this patch explicitly checks
for a hit_count of zero to make the intentions more clear.

Reported-by: Thomas Jarosch <thomas.jarosch@intra2net.com>
Tested-by: Thomas Jarosch <thomas.jarosch@intra2net.com>
Cc: stable@kernel.org
Signed-off-by: Patrick McHardy <kaber@trash.net>
2010-03-22 18:25:20 +01:00
Mark Brown
74511020dd Merge branch 'for-2.6.34' into for-2.6.35 2010-03-22 17:23:46 +00:00
Mark Brown
69266866a5 ASoC: Allow WM8903 mic detect disable and don't force bias on
Don't force enable the microphone bias on WM8903 when doing jack
detection, and don't force enable microphone bias. This allows
platforms to only enable microphone detection when a jack has been
inserted.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-03-22 17:22:56 +00:00
Tetsuo Handa
7c3456fdb5 rxrpc: Check allocation failure.
alloc_skb() can return NULL.

Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-22 10:22:55 -07:00
Mark Brown
f06bce9c8c ASoC: Allow disabling of WM835x jack detection
If no report is specified then disable detection. Note that we don't
disable the slow clock, though the power consumption from it should
be negligable. That should be reference counted, ideally through DAPM.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-03-22 17:22:39 +00:00
Mark Brown
2f14430af5 ASoC: Move WM8350 microphone detection bias managment out of driver
Allow machines to control exactly when the bias is turned on and off.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-03-22 17:21:38 +00:00
Mark Brown
5b9e87cccc ASoC: Allow force enabled pins to be disabled
Some systems, such as those with mechanical jack detection, may wish
to force enable a pin (typically mic bias) only some of the time.
Support such systems by having disable_pin() also coveer force enabled
pins.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-03-22 17:21:23 +00:00
Mark Brown
d5021ec9fc ASoC: Add a notifier for jack status changes
Some systems provide both mechanical and electrical detection of jack
status changes. On such systems power savings can be achieved by only
enabling the electrical detection methods when physical insertion has
been detected.

Begin supporting such systems by providing a notifier for jack status
changes which can be used to trigger any reconfiguration.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-03-22 17:20:57 +00:00
Linus Torvalds
7b1f513aac Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
  virtio: console: Check if port is valid in resize_console
  virtio: console: Generate a kobject CHANGE event on adding 'name' attribute
2010-03-22 10:03:51 -07:00