Commit graph

932,869 commits

Author SHA1 Message Date
Or Gerlitz
f19624aa92 IB/iser: Simplify send flow/descriptors
Simplify and shrink the logic/code used for the send descriptors.
Changes include removing struct iser_dto (an unnecessary abstraction),
using struct iser_regd_buf only for handling SCSI commands, using
dma_sync instead of dma_map/unmap, etc.

Signed-off-by: Or Gerlitz <ogerlitz@voltaire.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-02-24 09:41:12 -08:00
Or Gerlitz
78ad0a34dc IB/iser: Use different CQ for send completions
Use a different CQ for send completions, where send completions are
polled by the interrupt-driven receive completion handler.  Therefore,
interrupts aren't used for the send CQ.

Signed-off-by: Or Gerlitz <ogerlitz@voltaire.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-02-24 09:41:11 -08:00
Or Gerlitz
704315f082 IB/iser: Remove atomic counter for posted receive buffers
Now that both the posting and reaping of receive buffers is done in
the completion path, the counter of outstanding buffers not be atomic.

Signed-off-by: Or Gerlitz <ogerlitz@voltaire.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-02-24 09:41:11 -08:00
Or Gerlitz
bcc60c381d IB/iser: New receive buffer posting logic
Currently, the recv buffer posting logic is based on the transactional
nature of iSER which allows for posting a buffer before sending a PDU.
Change this to post only when the number of outstanding recv buffers
is below a water mark and in a batched manner, thus simplifying and
optimizing the data path.  Use a pre-allocated ring of recv buffers
instead of allocating from kmem cache.  A special treatment is given
to the login response buffer whose size must be 8K unlike the size of
buffers used for any other purpose which is 128 bytes.

Signed-off-by: Or Gerlitz <ogerlitz@voltaire.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-02-24 09:41:10 -08:00
Or Gerlitz
1cef465985 IB/iser: Revert commit bba7ebb "avoid recv buffer exhaustion"
We will make a major change in the recv buffer posting logic, after
which the problem commit bba7ebb "avoid recv buffer exhaustion caused
by unexpected PDUs" comes to solve doesn't exist any more, so revert it.

Signed-off-by: Or Gerlitz <ogerlitz@voltaire.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-02-24 09:41:09 -08:00
Jan Engelhardt
0f234214d1 netfilter: xtables: reduce arguments to translate_table
Just pass in the entire repl struct. In case of a new table (e.g.
ip6t_register_table), the repldata has been previously filled with
table->name and table->size already (in ip6t_alloc_initial_table).

Signed-off-by: Jan Engelhardt <jengelh@medozas.de>
Signed-off-by: Patrick McHardy <kaber@trash.net>
2010-02-24 18:36:04 +01:00
Jan Engelhardt
6bdb331bc6 netfilter: xtables: optimize call flow around xt_ematch_foreach
Signed-off-by: Jan Engelhardt <jengelh@medozas.de>
Signed-off-by: Patrick McHardy <kaber@trash.net>
2010-02-24 18:35:37 +01:00
Jan Engelhardt
dcea992aca netfilter: xtables: replace XT_MATCH_ITERATE macro
The macro is replaced by a list.h-like foreach loop. This makes
the code more inspectable.

Signed-off-by: Jan Engelhardt <jengelh@medozas.de>
Signed-off-by: Patrick McHardy <kaber@trash.net>
2010-02-24 18:34:48 +01:00
Jan Engelhardt
0559518b5b netfilter: xtables: optimize call flow around xt_entry_foreach
Signed-off-by: Jan Engelhardt <jengelh@medozas.de>
Signed-off-by: Patrick McHardy <kaber@trash.net>
2010-02-24 18:33:43 +01:00
Jan Engelhardt
72b2b1dd77 netfilter: xtables: replace XT_ENTRY_ITERATE macro
The macro is replaced by a list.h-like foreach loop. This makes
the code much more inspectable.

Signed-off-by: Jan Engelhardt <jengelh@medozas.de>
Signed-off-by: Patrick McHardy <kaber@trash.net>
2010-02-24 18:32:59 +01:00
Carlos O'Donell
5fd4514bb3 parisc: Set PCI CLS early in boot.
Set the PCI CLS early in the boot process to prevent
device failures. In pcibios_set_master use the new
pci_cache_line_size instead of a hard-coded value.

Signed-off-by: Carlos O'Donell <carlos@codesourcery.com>
Reviewed-by: Grant Grundler <grundler@google.com>
Signed-off-by: Kyle McMartin <kyle@redhat.com>
2010-02-24 17:30:36 +00:00
dingdinghua
23e2af3518 jbd2: clean up an assertion in jbd2_journal_commit_transaction()
commit_transaction has the same value as journal->j_running_transaction,
so we can simplify the assert statement.

Signed-off-by: dingdinghua <dingdinghua@nrchpc.ac.cn>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2010-02-24 12:11:20 -05:00
Dmitry Monakhov
56c50f11f4 ext4: trivial quota cleanup
The patch is aimed to reorganize and simplify quota code a bit.
Quota code is itself complex enough, but we can make it more readable
in some places:
- Move quota option parsing to separate functions.
- Simplify old-quota and journaled-quota mix check.

Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org>
Acked-by: Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2010-03-01 23:28:41 -05:00
Dmitry Monakhov
482a74258f ext4: mount flags manipulation cleanup
Replace intermediate EXT4_MOUNT_XXX flags manipulation to
corresponding macro.

Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org>
Acked-by: Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2010-02-24 11:35:32 -05:00
Linus Torvalds
7b1f94b8a6 Merge branch 'for-linus' of git://git.monstr.eu/linux-2.6-microblaze
* 'for-linus' of git://git.monstr.eu/linux-2.6-microblaze:
  microblaze: Fix out_le32() macro
  microblaze: Fix cache loop function for cache range
2010-02-24 07:43:02 -08:00
Linus Torvalds
83d90addc8 Merge branch 'for-linus' of git://git.kernel.dk/linux-2.6-block
* 'for-linus' of git://git.kernel.dk/linux-2.6-block:
  Revert "block: improve queue_should_plug() by looking at IO depths"
2010-02-24 07:42:42 -08:00
Jiaying Zhang
c8d46e41bc ext4: Add flag to files with blocks intentionally past EOF
fallocate() may potentially instantiate blocks past EOF, depending
on the flags used when it is called.

e2fsck currently has a test for blocks past i_size, and it
sometimes trips up - noticeably on xfstests 013 which runs fsstress.

This patch from Jiayang does fix it up - it (along with
e2fsprogs updates and other patches recently from Aneesh) has
survived many fsstress runs in a row.

Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Jiaying Zhang <jiayingz@google.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2010-02-24 09:52:53 -05:00
Misael Lopez Cruz
d62abe563f OMAP4: PMIC: Add support for twl6030 codec
In order to have TWL6030 CODEC driver as a platform driver, codec data
should be passed through twl_platform_data structure.

For twl6030 audio codec, the following data may be passed:
    - audpwron_gpio: gpio line used to power-up/down the codec. A low-to-high
      transition powers codec up. Setting audpwron_gpio to a negative value
      means that codec will use manual power sequence instead of automatic
      sequence
    - naudint_irq: irq line for audio interrupt. twl6030 drives NAUDINT line
      to low when an interrupt (codec ready, plug insertion/removal, etc) is
      detected

However, codec driver can operate if any or none of them are passed.

Signed-off-by: Misael Lopez Cruz <x0052729@ti.com>
Signed-off-by: Margarita Olaya Cabrera <magi.olaya@ti.com>
Signed-off-by: Jorge Eduardo Candelaria <jorge.candelaria@ti.com>
Acked-by: Samuel Ortiz <sameo@linux.intel.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-02-24 13:17:03 +00:00
Jiri Kosina
7c821a179f Remove fs/ntfs/ChangeLog
Remove fs/ntfs/ChangeLog. No need for such files since we have git.

Acked-by: Anton Altaparmakov <aia21@cam.ac.uk>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-02-24 13:55:31 +01:00
Thadeu Lima de Souza Cascardo
a8ab0102d7 doc: fix console doc typo
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@holoscopio.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-02-24 13:51:32 +01:00
Tomi Valkeinen
ddbfeb396e OMAP: DSS2: OMAPFB: Remove FB_OMAP2_FORCE_AUTO_UPDATE
Remove the option for forcing auto-update. Auto-update for manual update
displays is no more a DSS feature, so if a particular display devices does
have auto-update mode, it should be in display's custom settings.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
2010-02-24 14:31:28 +02:00
Tomi Valkeinen
942a91a6e0 OMAP: DSS2: DSI: remove external TE support
With the reworked model, DSI driver doesn't need to know anything about
external TE lines. Thus we can remove ext_te support, and only leave the
DSI TE trigger support.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
2010-02-24 14:31:28 +02:00
Tomi Valkeinen
69b2048f44 OMAP: DSS2: move timing functions
Move check/set/get_timings() from omap_dss_device to omap_dss_driver.

This is part of a larger patch-set, which moves the control from omapdss
driver to the display driver.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
2010-02-24 14:31:28 +02:00
Tomi Valkeinen
3651131268 OMAP: DSS2: move set/get_wss()
Move set/get_wss() from omap_dss_device to omap_dss_driver.

This is part of a larger patch-set, which moves the control from omapdss
driver to the display driver.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
2010-02-24 14:31:28 +02:00
Tomi Valkeinen
37ac60e414 OMAP: DSS2: move enable/disable/suspend/resume
Move enable/disable/suspend/resume from omap_dss_device to
omap_dss_driver.

This is part of a larger patch-set, which moves the control from omapdss
driver to the display driver.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
2010-02-24 14:31:28 +02:00
Tomi Valkeinen
18946f62c6 OMAP: DSS2: move update() and sync()
Move update() and sync() from omap_dss_device to omap_dss_driver.

Also, update was hardcoded to use virtual channel 0. This patch adds a
parameter that specifies the VC.

This is part of a larger patch-set, which moves the control from omapdss
driver to the display driver.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
2010-02-24 14:31:28 +02:00
Tomi Valkeinen
446f7bff70 OMAP: DSS2: move set/get_update_mode()
Move set/get_update_mode() from omap_dss_device to omap_dss_driver.

This is part of a larger patch-set, which moves the control from omapdss
driver to the display driver.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
2010-02-24 14:31:28 +02:00
Tomi Valkeinen
225b650d41 OMAP: DSS2: move enable/get_te()
Move enable/get_te() from omap_dss_device to omap_dss_driver.

This is part of a larger patch-set, which moves the control from omapdss
driver to the display driver.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
2010-02-24 14:31:27 +02:00
Tomi Valkeinen
a269950405 OMAP: DSS2: move get_recommended_bpp()
Move get_recommended_bpp() from omap_dss_device to omap_dss_driver.

This is part of a larger patch-set, which moves the control from omapdss
driver to the display driver.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
2010-02-24 14:31:27 +02:00
Tomi Valkeinen
96adceceed OMAP: DSS2: move get_resolution()
Move get_resolution() from omap_dss_device to omap_dss_driver.

This is part of a larger patch-set, which moves the control from omapdss
driver to the display driver.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
2010-02-24 14:31:27 +02:00
Tomi Valkeinen
a2faee84f6 OMAP: DSS2: move enable/disable_channel to overlay manager
Move enable/disable_channel() from omap_dss_device to overlay manager.

This is part of a larger patch-set, which moves the control from omapdss
driver to the display driver.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
2010-02-24 14:31:27 +02:00
Tomi Valkeinen
3f71cbe736 OMAP: DSS2: move wait_vsync()
Move wait_vsync() from omap_dss_device to overlay manager.

This is part of a larger patch-set, which moves the control from omapdss
driver to the display driver.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
2010-02-24 14:31:27 +02:00
Tomi Valkeinen
87424e1bff OMAP: DSS2: move get/set_rotate()
Move get/set_rotate() from omap_dss_device to omap_dss_driver.

This is part of a larger patch-set, which moves the control from omapdss
driver to the display driver.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
2010-02-24 14:31:27 +02:00
Tomi Valkeinen
8d8aa61dcf OMAP: DSS2: move set/get_mirror()
Move set/get_mirror() from omap_dss_device to omap_dss_driver.

This is part of a larger patch-set, which moves the control from omapdss
driver to the display driver.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
2010-02-24 14:31:27 +02:00
Tomi Valkeinen
c75d9464c1 OMAP: DSS2: move memory_read()
Move memory_read() from omap_dss_device to omap_dss_driver.

This is part of a larger patch-set, which moves the control from omapdss
driver to the display driver.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
2010-02-24 14:31:27 +02:00
Tomi Valkeinen
1a75ef422d OMAP: DSS2: move run_test()
Move run_test() from omap_dss_device to omap_dss_driver.

This is part of a larger patch-set, which moves the control from omapdss
driver to the display driver.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
2010-02-24 14:31:26 +02:00
Tomi Valkeinen
1bbb275e26 OMAP: DSS2: DSI: remove auto-update perf measurement
Remove performance measurement for auto-update. Auto-update and thus
performance measurement cannot be supported after the driver change where
the control is moved to display drivers.

This is part of a larger patch-set, which moves the control from omapdss
driver to the display driver.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
2010-02-24 14:31:26 +02:00
Tomi Valkeinen
b9eb5d7d0b OMAP: DSS2: DSI: change DSI bus_lock to semaphore
Physical DSI bus is protected by a mutex. This patch changed the mutex to
a semaphore, so that we can lock and unlock the bus_lock from different
threads.

This is needed as the update process is started by user space program, and
thus the lock is acquired in that context, but the lock can be released in
different context, a work thread via irq.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
2010-02-24 14:31:26 +02:00
Steven J. Magnani
83b4d17d88 microblaze: Fix out_le32() macro
Trailing semicolon causes compilation involving out_le32() to fail.

Signed-off-by: Steven J. Magnani <steve@digidescorp.com>
Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-02-24 13:18:49 +01:00
Michal Simek
0d670b2472 microblaze: Fix cache loop function for cache range
I create wrong asm code but none test shows that this part of code is wrong.
I am not convinces that were good idea to create asm optimized macros
for caches. The reason is that there is not optimization with previous code
that's why make sense to add old code and do some benchmarking which
functions are faster.

Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-02-24 13:18:29 +01:00
David Härdeman
197d4db752 Input: winbond-cir - fix suspend/resume
This fixes suspend/resume problem with the driver caused by the
fact that ACPI _DIS method would completely power off the SP3
module leaving the output lines (including IRQ lines) in an
undefined state. This could cause spurious interrupts and requires
reinitializing hardware from scratch during resume.

This fixes:

	http://bugzilla.kernel.org/show_bug.cgi?id=15257

Signed-off-by: David Härdeman <david@hardeman.nu>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-02-24 02:10:38 -08:00
GeunSik Lim
e21a05cb40 doc: cpuset: Update the cpuset flag file
This patch is for modifying with correct cuset flag file.  We need to update
current manual for cpuset.  For example, before) cpus, cpu_exclusive, mems
after ) cpuset.cpus, cpuset.cpu_exclusive, cpuset.mems

Signed-off-by: Geunsik Lim <geunsik.lim@samsung.com>
Acked-by: Paul Menage <menage@google.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-02-24 11:06:39 +01:00
Baruch Siach
08268b78d6 mx25: move ARCH_MXC_IOMUX_V3 to the ARCH level
ARCH_MXC_IOMUX_V3 is not specific to the i.MX25 PDK platform. Thus,
ARCH_MXC_IOMUX_V3 should be selected by ARCH_MX25.

Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-02-24 10:45:21 +01:00
Fabio Estevam
82d52a1948 mx51_babbage: Fix ckih2 parameter in mx51_clocks_init function
This patch is to be applied into Sascha's mxc-master branch.

Fix ckih2 parameter in mx51_clocks_init funtion. CKIH2 pin is left unconnected on Babbage.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Amit Kucheria <amit.kucheria@canonical.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-02-24 10:29:14 +01:00
Mark Brown
cd6eb9808c mx31ads: Configure SSI5 pins in IOMUX for PMIC module audio support
SSI5 on the CPU is connected to the PMIC module to provide audio support
so unconditionally configure the relevant pins on the CPU to route out
the signals.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-02-24 10:23:42 +01:00
Uwe Kleine-König
bac3fcfad5 arm/imx/iomux-v1: check for invalid modes in mxc_gpio_mode
mxc_gpio_mode checks for invalid pins and so it returns zero for
success, -EINVAL for invalid pins.

While at it, remove definitions of GPIO_PORT_MAX removed as they are
unused now.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-02-24 10:07:16 +01:00
Uwe Kleine-König
e835d88e71 arm/imx: let platform files include the SoC-specific iomux header
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-02-24 10:07:15 +01:00
Uwe Kleine-König
111588f830 arm/imx/iomux-v1: rename header file
Addionally make iomux-mx*.h headers stand-alone and similar to iomux-v3
platform files should include their platform iomux header from now on.
For now iomux.h simply includes all iomux-v1 platform headers and so
provides compatibility until all files are converted.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-02-24 10:07:15 +01:00
Uwe Kleine-König
261f6f681c arm/mx25: don't include iomux.h which is for iomux-v1 machines
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-02-24 10:07:14 +01:00
Uwe Kleine-König
2f6c97c48e arm/imx/iomux-mx3.h: unify style and comments
- use __MACH_IOMUX_MX3_H__ as header protector analogous to
  <mach/mx...h>
- use tabs for indention

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-02-24 10:07:13 +01:00