Commit graph

932,869 commits

Author SHA1 Message Date
Bartlomiej Zolnierkiewicz
22cabc2619 cmd64x: remove superfluous checks from cmd64x_set_dma_mode()
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-19 01:24:59 -08:00
Bartlomiej Zolnierkiewicz
60349ab99f cmd64x: fix PIO and MWDMA timings calculations
Just use the standard ide_timing_compute() helper to calculate
PIO and MWDMA timings.  This fixes some issues with the open-coded
version like allowing faster MWDMA timings than the ones required
by the current PIO mode or not accounting for the enhanced MWDMA
cycle time specified by the device.

Based on libata pata_cmd64x host driver.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-19 01:24:58 -08:00
Bartlomiej Zolnierkiewicz
31bbb668fb amd74xx: don't change UDMA settings when programming PIO timings
Based on libata pata_amd host driver.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-19 01:24:58 -08:00
Bartlomiej Zolnierkiewicz
d23f33de3c alim15x3: cleanup ali_cable_detect()
Remove leftover local_irq_[save,restore]() and FIXME note.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-19 01:24:57 -08:00
Bartlomiej Zolnierkiewicz
5f6bd68ef5 alim15x3: remove superfluous locking from ali_set_pio_mode()
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-19 01:24:57 -08:00
Bartlomiej Zolnierkiewicz
293f18ad72 alim15x3: add ali_fifo_control() helper
Based on libata pata_ali host driver.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-19 01:24:56 -08:00
Bartlomiej Zolnierkiewicz
3c8cc8df5a alim15x3: fix PIO timings calculations
Just use the standard ide_timing_compute() helper to calculate
PIO timings.  This fixes many issues with the open-coded version
like potential recovery timings underclocking or not accounting
for the enhanced cycle time specified by the device.

Based on libata pata_ali host driver.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-19 01:24:56 -08:00
Bartlomiej Zolnierkiewicz
2b7d03a5cd ide: use standard timing for XFER_PIO_SLOW mode in ide_timing_compute()
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-19 01:24:55 -08:00
Thomas Abraham
51fe52229e ARM: SAMSUNG: serial: Modify console initialization.
This patch modifies s3c24xx_serial_initconsole function to accept multiple
platform UART information structures. This is required on platforms that have
differences among the instances of UART ports. As an example, the FIFO sizes
could be different for each UART instance and hence multiple platform UART
information structures would be needed.

This patch also modifies the s3c24xx_console_init macro since it wraps the
call to the s3c24xx_serial_initconsole function.

Signed-off-by: Thomas Abraham <thomas.ab@samsung.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-01-19 17:50:47 +09:00
Ben Dooks
bb9b1c7727 ARM: Merge next-samsung-clock2
Merge branch 'next-samsung-clock2' into next-samsung-try5
2010-01-19 17:49:59 +09:00
Ben Dooks
c3e71c6d21 ARM: Merge next-samsung-devupdates1
Merge branch 'next-samsung-devupdates1' into next-samsung-try5
2010-01-19 17:48:35 +09:00
Ben Dooks
645f0b07fe ARM: Merge next-jassi-spi
Merge branch 'next-jassi-spi' into next-samsung-try5
2010-01-19 17:47:39 +09:00
Ben Dooks
44d6cef805 ARM: Merge next-s3c6410-andygreen
Merge branch 'next-s3c6410-andygreen' into next-samsung-try5
2010-01-19 17:42:25 +09:00
Ben Dooks
8e2376ab10 ARM: Merge next-samsung-mc-adc
Merge branch 'next-samsung-mc-adc' into next-samsung-try5

Conflicts:
	arch/arm/mach-s3c6400/include/mach/map.h
	(fix ADC and RTC merge)
2010-01-19 17:42:02 +09:00
Michael Hennerich
5a9003db1f Input: ADP5588 - add support for ADP5587 devices
The ADP5587 is quite similar to the ADP5588 but features a greater I/O
voltage range and lacks the Dual Light Sensor Interface.  This new part
is also supported by this driver.

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-01-19 00:32:17 -08:00
Michael Hennerich
ec51b7f538 Input: ad7879 - support auxiliary GPIOs via gpiolib
Drop the simple fancy sysfs hooks for the aux GPIOs and expose these via
the gpiolib interface so that other drivers can use them.

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-01-19 00:31:51 -08:00
Ben Dooks
22c810ab3e ARM: S3C24XX: Add mci platform data set call s3c24xx_mci_set_platdata().
Add a s3c24xx_mci_set_platdata() call for all the machine files that have
platform data for the MCI driver. This brings the MCI device into line with
the other devices with __initdata and a specific call to ensure the right
structure type is being passed.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-01-19 17:21:38 +09:00
Paul Mundt
79f211b8e1 sh64: wire up sys_accept4.
sh64 on the other hand provides both direct broken out syscalls as well
as socketcall access. As there are binaries that use both socketcall has
to stay around. The current ABI prefers direct syscalls.

It was pointed out that when sys_recvmmsg was added in, sys_accept4 was
overlooked. This takes care of wiring it up.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-01-19 17:00:31 +09:00
Paul Mundt
6eacb2c4cb sh: unwire sys_recvmmsg.
sh32 at the moment only uses sys_socketcall to reach these, so unwire
recvmmsg for now. While we're at it, add it to the ignore list, as per
the s390 change.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-01-19 17:00:06 +09:00
Paul Mundt
a4ae2b2b18 sh64: Fixup build breakage from breakpoint handler rename.
The breakpoint handler was renamed on sh32, but sh64 was overlooked in
the conversion. Fix it up now.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-01-19 15:58:27 +09:00
Paul Mundt
d6db8888c8 sh64: Use the shared FPU state restorer.
This kills off the sh64-specific state restorer and switches over to
the generic one.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-01-19 15:55:27 +09:00
Paul Mundt
88ea1a445a sh64: Fix up PC casting in unaligned fixup notifier with 32bit ABI.
Presently the build bails with the following:

  CC      arch/sh/mm/alignment.o
cc1: warnings being treated as errors
arch/sh/mm/alignment.c: In function 'unaligned_fixups_notify':
arch/sh/mm/alignment.c:69: warning: cast to pointer from integer of different size
arch/sh/mm/alignment.c:74: warning: cast to pointer from integer of different size
make[2]: *** [arch/sh/mm/alignment.o] Error 1

This is due to the fact that regs->pc is always 64-bit, while the pointer size
depends on the ABI. Wrapping through instruction_pointer() takes care of the
appropriate casting for both configurations.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-01-19 15:41:50 +09:00
Paul Mundt
3ef2932b8c sh64: Fix up the build for the thread_xstate changes.
This updates the sh64 processor info with the sh32 changes in order to
tie in to the generic task_xstate management code.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-01-19 15:40:03 +09:00
Paul Mundt
cb6d04468d sh: Kill off now bogus fixmap/page wiring documentation.
The plans for _PAGE_WIRED were detailed in a comment with the fixmap
code, but as it's now all taken care of, we no longer have any reason for
keeping it around, particularly since it's no longer accurate. Kill it
off.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-01-19 15:22:52 +09:00
Paul Mundt
bb29c677b3 sh: Split out MMUCR.URB based entry wiring in to shared helper.
Presently this is duplicated between tlb-sh4 and tlb-pteaex. Split the
helpers out in to a generic tlb-urb that can be used by any parts
equipped with MMUCR.URB.

At the same time, move the SH-5 code out-of-line, as we require single
global state for DTLB entry wiring.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-01-19 15:20:35 +09:00
Paul Mundt
046581f962 sh: Provide a dummy _PAGE_WIRED flag for non-X2TLB parts.
This provides a dummy value for legacy parts which permits the entry
wiring to be open-coded. The compiler takes care of optimizing the entry
wiring away in these cases.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-01-19 14:23:39 +09:00
Paul Mundt
6d63e73d52 sh: Limit ioremap_prot() to 32bit pgprot parts.
Presently ioremap_prot() uses an unsigned long to pass the pgprot value
around. This results in the upper half of the pgprot being chomped when
using 64-bit pgprots on a 32-bit ABI (X2TLB and SH-5).

As the only users of ioremap_prot() are presently legacy parts, this
doesn't cause too much of an issue. In the future when the interface is
converted to use pgprot_t directly this can be re-enabled for the other
parts, too.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-01-19 14:00:14 +09:00
Paul Mundt
f33609344a sh: Convert p3_ioremap() users to ioremap_prot().
This kills off the ancient p3_ioremap(), converting over to the more
generic ioremap_prot() instead.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-01-19 13:55:41 +09:00
Paul Mundt
acf2c9685f sh: Kill off duplicate address alignment in ioremap_fixed().
This is already taken care of in the top-level ioremap, and now that
no one should be calling ioremap_fixed() directly we can simply throw the
mapping displacement in as an additional argument.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-01-19 13:49:19 +09:00
Paul Mundt
d57d64080d sh: Prevent 64-bit pgprot clobbering across ioremap implementations.
Presently 'flags' gets passed around a lot between the various ioremap
helpers and implementations, which is only 32-bits. In the X2TLB case
we use 64-bit pgprots which presently results in the upper 32bits being
chopped off (which handily include our read/write/exec permissions).

As such, we convert everything internally to using pgprot_t directly and
simply convert over with pgprot_val() where needed. With this in place,
transparent fixmap utilization for early ioremap works as expected.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-01-19 13:34:38 +09:00
Ben Dooks
3cd2fff59f ARM: MINI2440: Remove commented out devices from device array
There's no point in having these in until there is proper support for
them, so remove as they only confuse the device changing script.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-01-19 09:23:52 +09:00
Ben Dooks
f126752043 ARM: SAMSUNG: Add platform data registration for OHCI
Add a platform data helper for the OHCI device

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-01-19 09:23:51 +09:00
Ben Dooks
0a6361316d ARM: SAMSUNG: Make UART device code common
Move s3c24xx_uart_devs, s3c24xx_uart_src and the platform devices to a
common entry in plat-samsung since they are the same in all the current
implementations.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-01-19 09:23:50 +09:00
George Kadianakis
8605c46c17 [SCSI] lpfc: restore MSI-X/MSI support
A Gentoo bug report [1] showed that as of 2.6.31 lpfc only uses INTx interrupts.
This patch restores lpfc's ability to support MSI-X/MSI interrupts that the
"Addition of SLI4 Interface - Base Support" patch [2] broke.
It reestablishes MSI-X as the default interrupt method and in case MSI-X is not
supported lpfc_sli{4,}_enable_intr fallbacks to MSI and then to INTx.

[1]: http://bugs.gentoo.org/show_bug.cgi?id=296319
[2]: commit da0436e915

[James Smart:
Background:
Nothing Broke. This was intended.

We had originally enabled MSI-X by default, but in qualification within the
last 12 months, we encountered a major catch-22:

There were at least 4 platforms, from 2 major OEMs, that :
- Say they support MSI-X - platform routines work and act as if they do.
- We enable it, generate a test interrupt to check they really do deliver it,
and it works.
- But shortly after attachment, the system hangs or loses interrupts,
resulting in a bad system behavior.

Given the distro's picking up the 2.6.32 kernel, we had to stick with a
default of MSI-X off, with user-enabled MSI-X as these platforms couldn't get
fixed.

However, we're also now encountering platforms that require MSI-X and never
INTx, so we must change. It's desired also for also for performance reasons.

So - now (2.6.33) is the right time to re-enable MSI-X by default.
]
[jejb: fix up comment on default values]

Signed-off-by:  George Kadianakis <desnacked@gmail.com>
Acked-by: James Smart  <james.smart@emulex.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-01-18 16:51:59 -06:00
Giridhar Malavali
e8a392444d [SCSI] qla2xxx: Update version number to 8.03.02-k0.
Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-01-18 16:51:59 -06:00
Giridhar Malavali
f8ac60855e [SCSI] qla2xxx: Remove firmware hint for 81xx parts.
Firmware is loaded from flash for these ISP types.

Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-01-18 16:51:58 -06:00
Giridhar Malavali
9a069e1967 [SCSI] qla2xxx: Add BSG support for FC ELS/CT passthrough and vendor commands.
[jejb: fixed printk casting issues]
Signed-off-by: Sarang Radke <sarang.radke@qlogic.com>
Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-01-18 16:51:05 -06:00
Linus Torvalds
24bc7347da Merge git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog
* git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog:
  [WATCHDOG] iTCO_wdt: Add Intel Cougar Point and PCH DeviceIDs
2010-01-18 14:20:15 -08:00
Suresh Siddha
bb668da6d6 x86, apic: use logical flat for systems with <= 8 logical cpus
We can use logical flat mode if there are <= 8 logical cpu's
(irrespective of physical apic id values).  This will enable simplified
and efficient IPI and device interrupt routing on such platforms.

This has been tested to work on both Intel and AMD platforms.
Exceptions like IBM summit platform which can't use logical flat mode
are addressed by using OEM platform checks.

Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Chris McDermott <lcm@linux.vnet.ibm.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-01-18 14:15:28 -08:00
Suresh Siddha
dfea91d5a7 x86, apic: use physical mode for IBM summit platforms
Chris McDermott from IBM confirmed that hurricane chipset in IBM summit
platforms doesn't support logical flat mode.  Irrespective of the other
things like apic_id's, total number of logical cpu's, Linux kernel
should default to physical mode for this system.

The 32-bit kernel does so using the OEM checks for the IBM summit
platform.  Add a similar OEM platform check for the 64bit kernel too.

Otherwise the linux kernel boot can hang on this platform under certain
bios/platform settings.

Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Tested-by: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Chris McDermott <lcm@linux.vnet.ibm.com>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-01-18 14:15:27 -08:00
Linus Torvalds
54ef91dcf0 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6:
  ALSA: Remove warning message for invalid OSS minor ranges
  ALSA: hda - Fix capture on Sony VAIO with single input
  ALSA: hda - Fix mute led GPIO on HP dv-series notebooks
  ALSA: use subsys_initcall for sound core instead of module_init
  ALSA: hda - Fix missing capture mixer for ALC861/660 codecs
  ALSA: hda - Improved MacBook (Pro) 5,1 / 5,2 support
  ALSA: hda - Fix Toshiba NB20x quirk entry
2010-01-18 14:13:17 -08:00
Linus Torvalds
91302873ba Merge branch 'for-linus' of git://git.monstr.eu/linux-2.6-microblaze
* 'for-linus' of git://git.monstr.eu/linux-2.6-microblaze:
  microblaze: pci_controller->arch_data really is a struct device_node *
  microblaze: Add missing double apostrophe in Kconfig
  microblaze: Add PT_ macros for special purpose regs
  microblaze: Enable accept4 syscall
  microblaze: Wire up recvmmsg syscall
2010-01-18 14:12:42 -08:00
Linus Torvalds
fe64454d7b Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6:
  mfd: Unlock mc13783 before subsystems initialisation, at probe time.
  mfd: WM835x GPIO direction register is not locked
  mfd: tmio_mmc hardware abstraction for CNF area
  mfd: WM8350 off by one bug
  mfd: Correct WM835x ISINK ramp time defines
2010-01-18 14:11:26 -08:00
Linus Torvalds
8888be69ad Merge branch 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc
* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc:
  powerpc: Move cpu hotplug driver lock from pseries to powerpc
  powerpc: Move /proc/ppc64 to /proc/powerpc update
  powerpc/8xx: Fix user space TLB walk in dcbX fixup
  powerpc: Fix decrementer setup on 1GHz boards
  powerpc/iseries: Initialise on-stack completion
  powerpc/hvc: Driver build breaks with !HVC_CONSOLE
  serial/pmac_zilog: Workaround problem due to interrupt on closed port
  powerpc/macintosh: Make Open Firmware device id constant
  powerpc: Use helpers for rlimits
  powerpc: cpumask_of_node() should handle -1 as a node
  powerpc/pseries: Fix dlpar compile warning without CONFIG_PROC_DEVICETREE
  powerpc/pseries: Fix xics interrupt affinity
  powerpc/swsusp_32: Fix TLB invalidation
  powerpc/8xx: Always pin kernel instruction TLB
  powerpc: 2.6.33 update of defconfigs for embedded 6xx/7xxx, 8xx, 8xxx
  powerpc: Use scripts/mkuboot.sh instead of 'mkimage'
  powerpc/5200: update defconfigs
2010-01-18 14:08:55 -08:00
Linus Torvalds
1e868d8e6d Merge branch 'for-linus' of git://oss.sgi.com/xfs/xfs
* 'for-linus' of git://oss.sgi.com/xfs/xfs:
  xfs: xfs_swap_extents needs to handle dynamic fork offsets
  xfs: fix missing error check in xfs_rtfree_range
  xfs: fix stale inode flush avoidance
  xfs: Remove inode iolock held check during allocation
  xfs: reclaim all inodes by background tree walks
  xfs: Avoid inodes in reclaim when flushing from inode cache
  xfs: reclaim inodes under a write lock
2010-01-18 14:08:07 -08:00
Linus Torvalds
2faae42233 Merge branch 'mantis' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6
* 'mantis' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6: (117 commits)
  V4L/DVB (13851): Fix Input dependency for Mantis
  V4L/DVB(13824a): mantis: Fix __devexit bad annotations
  V4L/DVB (13808b): mantis: replace DMA_nnBIT_MASK to DMA_BIT_MASK(32)
  V4L/DVB (13808): [Mantis/Hopper] Build update for Mantis/Hopper based cards
  V4L/DVB(13808a): mantis: convert it to the new ir-core register/unregister functions
  V4L/DVB (13812): [Mantis/Hopper] Update Copyright header
  V4L/DVB (13811): [MB86A16] Update Copyright header
  V4L/DVB (13810): [MB86A16] Use DVB_* macros
  V4L/DVB (13809): Fix Checkpatch violations
  V4L/DVB (13807): Fix: Free device in the device registration failure case
  V4L/DVB (13806): Register and Initialize Remote control
  V4L/DVB (13805): Fix: Unregister the frontend before detaching
  V4L/DVB (13804): Remove unused I2C Adapter ID
  V4L/DVB (13803): Remove unused dependency on CU1216
  V4L/DVB (13802): [Mantis/Hopper] Fix all build related warnings
  V4L/DVB (13801): [MB86A16] Use the search callback
  V4L/DVB (13800): [Mantis] I2C optimization. Required delay is much lesser than 1mS.
  V4L/DVB (13799): [Mantis] Unregister frontend
  V4L/DVB (13798): [Mantis] Enable power for all cards, use byte mode only on relevant devices
  V4L/DVB (13797): [Mantis/Hopper/TDA665x] Large overhaul,
  ...
2010-01-18 14:07:07 -08:00
Linus Torvalds
630ca048ce Merge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6: (23 commits)
  V4L/DVB (13966): DVB-T regression fix for saa7134 cards
  V4L/DVB (13955): cx25821: fix double unlock in medusa_video_init()
  MAINTAINERS: ivtv-devel is moderated
  MAINTAINERS: Andy Walls is the new ivtv maintainer
  V4L/DVB (13941): rj54n1cb0c: remove compiler warning
  V4L/DVB sh_mobile_ceu: don't check platform_get_irq's return value against zero
  V4L/DVB mx1_camera: don't check platform_get_irq's return value against zero
  V4L/DVB (13934): tda8290: Fix FM radio easy programming standard selection for TDA8295
  V4L/DVB (13900): gspca - sunplus: Fix bridge exchanges.
  V4L/DVB (13887): tda8290: add autodetection support for TDA8295c2
  V4L/DVB (13882): gspca - stv06xx-vv6410: Ensure register STV_SCAN_RATE is zero
  V4L/DVB (13880): gspca - m5602-s5k4aa: Add vflip quirk for the Amilo Xi 2428
  V4L/DVB (13875): gspca - vc032x: Fix a possible crash with the vc0321 bridge.
  V4L/DVB (13868): gspca - sn9c20x: Fix test of unsigned.
  V4L/DVB (13858): ir-keytable: use the right header
  feature-removal-schedule: Add v4l1 drivers obsoleted by gspca sub drivers
  V4L/DVB (13622): gspca - ov534: Fix a compilation warning.
  V4L/DVB (13834): dib8000: fix compilation if !DVB_DIB8000
  V4L/DVB (13831): uvcvideo: Fix oops caused by a race condition in buffer dequeuing
  V4L/DVB (13829): uvcvideo: Fix alternate setting selection in isochronous mode
  ...
2010-01-18 14:06:52 -08:00
H. Peter Anvin
1838ef1d78 x86-64, rwsem: 64-bit xadd rwsem implementation
For x86-64, 32767 threads really is not enough.  Change rwsem_count_t
to a signed long, so that it is 64 bits on x86-64.

This required the following changes to the assembly code:

a) %z0 doesn't work on all versions of gcc!  At least gcc 4.4.2 as
   shipped with Fedora 12 emits "ll" not "q" for 64 bits, even for
   integer operands.  Newer gccs apparently do this correctly, but
   avoid this problem by using the _ASM_ macros instead of %z.
b) 64 bits immediates are only allowed in "movq $imm,%reg"
   constructs... no others.  Change some of the constraints to "e",
   and fix the one case where we would have had to use an invalid
   immediate -- in that case, we only care about the upper half
   anyway, so just access the upper half.

Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
LKML-Reference: <tip-bafaecd11df15ad5b1e598adc7736afcd38ee13d@git.kernel.org>
2010-01-18 14:00:34 -08:00
Seth Heasley
3c9d8eccd8 [WATCHDOG] iTCO_wdt: Add Intel Cougar Point and PCH DeviceIDs
This patch adds the Intel Cougar Point and PCH DeviceIDs for iTCO Watchdog.

Signed-off-by: Seth Heasley <seth.heasley@intel.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2010-01-18 21:39:49 +00:00
Hin-Tak Leung
ad580db50e zd1211rw: adding 0409:0248 to supported device list
Yasuhiro ABE <yadiary@gmail.com> reported success in sourceforge zd1211-dev list.
The device is a NEC Aterm WL54GU usb wireless stick.

The brand and retail product name
    NEC, Aterm PA-WL54GU
The USB ID's (duh)
    ID 0409:0248
The chip ID string
    zd1211rw 1-1:1.0: zd1211b chip 0409:0248 v4810 high 00-1b-8b AL2230S_RF pa0 g--N-
The FCC ID
    unknown

Signed-off-by: Hin-Tak Leung <htl10@users.sourceforge.net>
Signed-off-by: Yasuhiro ABE <yadiary@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-18 15:07:03 -05:00