Commit graph

932,869 commits

Author SHA1 Message Date
Juha Yrjola
0ccd76d4c2 omap_hsmmc: Implement scatter-gather emulation
Instead of using the bounce buffer, using scatter-gather emulation
(as in the OMAP1/2 MMC driver) removes the need of one extra memory
copy and improves performance.

Signed-off-by: Juha Yrjola <juha.yrjola@solidboot.com>
Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2009-03-24 21:30:05 +01:00
Adrian Hunter
4a694dc915 omap_hsmmc: Fix response type for busy after response
Some MMC commands result in the card becoming busy after
the response is received.  This needs to be specified
for the omap_hsmmc host controller, which is what this
patch does.  However, the effect is that some commands
with no data will cause a Transfer Complete (TC) interrupt
in addition to the Command Complete (CC) interrupt.
In order to deal with that, the irq handler has needed
a few changes also.

The benefit of this change is that the omap_hsmmc host
controller driver now waits for the TC interrupt while
the card is busy, so the mmc_block driver needs to poll
the card status just once instead of repeatedly.
i.e. the net result is more sleep and less cpu.

The command sequence for open-ended multi-block write
with DMA is now:

	Issue write command CMD25
	Receive CC interrupt
	Data is sent
	Receive TC interrupt (DMA is done)
	Issue stop command CMD12
	Receive CC interrupt
	Card is busy
	Receive TC interrupt
	Card is now ready for next transfer

Signed-off-by: Adrian Hunter <adrian.hunter@nokia.com>
Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2009-03-24 21:30:04 +01:00
Jarkko Lavinen
82788ff532 omap_hsmmc: Do dma cleanup also with data CRC errors
Signed-off-by: Jarkko Lavinen <jarkko.lavinen@nokia.com>
Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2009-03-24 21:30:04 +01:00
Pierre Ossman
2a69567b87 mmc: add maintainer for mvsdio driver
Nicolas Pitre accepted to look after the mvsdio driver.

Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2009-03-24 21:30:04 +01:00
Maen Suleiman
236caa7cc3 mmc: SDIO driver for Marvell SoCs
This supports MMC/SD/SDIO currently found on the Kirkwood 88F6281 and
88F6192 SoC controllers.

Signed-off-by: Nicolas Pitre <nico@marvell.com>
Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2009-03-24 21:30:03 +01:00
Alexander Beregalov
4cb32906e4 MMC: tmio_mmc.h: fix build problem
drivers/mmc/host/tmio_mmc.h: In function 'tmio_mmc_kmap_atomic':
drivers/mmc/host/tmio_mmc.h:147: error: implicit declaration of function 'kmap_atomic'
drivers/mmc/host/tmio_mmc.h:147: error: 'KM_BIO_SRC_IRQ' undeclared (first use in this function)
drivers/mmc/host/tmio_mmc.h: In function 'tmio_mmc_kunmap_atomic':
drivers/mmc/host/tmio_mmc.h:153: error: implicit declaration of function 'kunmap_atomic'
drivers/mmc/host/tmio_mmc.h:153: error: 'KM_BIO_SRC_IRQ' undeclared (first use in this function)

Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com>
Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2009-03-24 21:30:03 +01:00
Magnus Damm
bedcc45c2e tmio_mmc: Fix use after free in remove()
Update the tmio_mmc code to call mmc_free_host() when
done using the private data. Without this fix the driver
frees memory and then keeps on using it as private data.

Signed-off-by: Magnus Damm <damm@opensource.se>
Acked-by: Ian Molton <ian@mnementh.co.uk>
Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2009-03-24 21:30:03 +01:00
Magnus Damm
bc6772a023 tmio_mmc: Fix one off, use resource_size() in probe()
Update the tmio_mmc code to use resource_size(). With this
patch applied the correct resource size is passed to ioremap().

Signed-off-by: Magnus Damm <damm@opensource.se>
Acked-by: Ian Molton <ian@mnementh.co.uk>
Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2009-03-24 21:30:02 +01:00
Wolfgang Muees
c0c8887157 mmc_spi: allow higher timeouts for SPI mode
Some SD cards have very high timeouts in SPI mode.
So adjust the timeouts from theory to practice.

Signed-off-by: Wolfgang Muees <wolfgang.mues@auerswald.de>
Acked-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2009-03-24 21:30:02 +01:00
Wolfgang Muees
ea15ba5cd7 mmc_spi: wait more bytes for card response
Some cards are slower than the standard allows and need more
time to respond to a command. Max. observed number of bytes
was 12.

Signed-off-by: Wolfgang Muees <wolfgang.mues@auerswald.de>
Acked-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2009-03-24 21:30:02 +01:00
Wolfgang Muees
48881caec4 mmc_spi: allow setting of spi mode 3
Allow the platform data structures to specify spi mode 3
(if there is a pullup on the clock line or the spi hardware
is not able to serve spi mode 0).

Signed-off-by: Wolfgang Muees <wolfgang.mues@auerswald.de>
Acked-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2009-03-24 21:30:01 +01:00
Pierre Ossman
b8e2006d5b sdhci: change list address
Domain change of the sdhci development list.

Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2009-03-24 21:30:01 +01:00
Balaji Rao
d3096f88ac mmc: During unsafe resume, select the right volatge for the card
During mmc unsafe resume, choose the right voltage for the card after
powerup.

Although this has not seen to cause trouble, it's the wrong behaviour.

Signed-off-by: Balaji Rao <balajirrao@openmoko.org>
Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2009-03-24 21:30:01 +01:00
Pierre Ossman
be6f19fc24 sdio: check that addresses are within the address space
Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2009-03-24 21:30:00 +01:00
Pierre Ossman
c8d718f103 sdio: handle null tuples
Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2009-03-24 21:30:00 +01:00
Pierre Ossman
0d6132ba0b sdio: handle cis end marker in link field
Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2009-03-24 21:30:00 +01:00
Kim Kyuwon
1b331e69a2 omap_hsmmc: Initialize hsmmc controller registers when resuming
Most registers lose its state when the processor wakes up from sleep state.
Thus registers should be initialized, when the processor wakes up. However the
current hsmmc 'resume' function doesn't consider this issue and finally makes
deadlock. So this patch fixes this problem.

Signed-off-by: Kim Kyuwon <chammoru@gmail.com>
Signed-off-by: Adrian Hunter <ext-adrian.hunter@nokia.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2009-03-24 21:29:59 +01:00
Adrian Hunter
9e57d60829 omap_hsmmc: do not re-power when powering off MMC
Remove code that turns MMC1 power back on after it
has been powered off (when the voltage is 1.8V).

The offending code is not necessary because the
host controller bus voltage is initialized to
3V when probing or resuming.  Note that MMC powers up
with the highest voltage available (see mmc_power_up())
which will be 3V also.

Signed-off-by: Adrian Hunter <ext-adrian.hunter@nokia.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2009-03-24 21:29:59 +01:00
Adrian Hunter
736bb6bb01 mmc: Add Extended CSD register to debugfs
Extended CSD is a MMC card register.  As increasingly interesting
fields are being added to Extended CSD, it is helpful to see its
value.  Note that SD cards do not have an Extended CSD
register, so it is MMC only.

Signed-off-by: Adrian Hunter <ext-adrian.hunter@nokia.com>
Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2009-03-24 21:29:59 +01:00
Andy Whitcroft
6b0b62853b mmc: add MODALIAS linkage for MMC/SD devices
Currently we are using an explicit udev rule to trigger loading of the
mmc-block module when an MMC or SD card is detected:

    SUBSYSTEM=="mmc", RUN+="/sbin/modprobe -Qba mmc-block"

It makes much more sense for the mmc bus driver and the mmc-block module to
share MODALIAS information so that they are linked automatically.

There is no real information of use in the MMC system at the current time.
All devices inserted require us to load the mmc-block device.  Until such
time as useful parameters exist simply reflect the module linkage via
the module alias below:

	mmc:block

Signed-off-by: Andy Whitcroft <apw@canonical.com>
Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2009-03-24 21:29:58 +01:00
Jorg Schummer
7de427d088 mmc: delayed_work was never cancelled
The delayed work item mmc_host.detect is now cancelled before flushing
the work queue. This takes care of cases when delayed_work was scheduled
for mmc_host.detect, but not yet placed in the work queue.

Signed-off-by: Jorg Schummer <ext-jorg.2.schummer@nokia.com>
Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2009-03-24 21:29:58 +01:00
Kay Sievers
89c8aa203e mmc: struct device - replace bus_id with dev_name(), dev_set_name()
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2009-03-24 21:29:57 +01:00
David S. Miller
b5bb14386e Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/kaber/nf-next-2.6 2009-03-24 13:24:36 -07:00
Geert Uytterhoeven
142071b834 dnet: drivers/net/dnet.c needs <linux/io.h>
On m68k:
| drivers/net/dnet.c: In function 'dnet_readw_mac':
| drivers/net/dnet.c:36: error: implicit declaration of function 'writel'
| drivers/net/dnet.c:43: error: implicit declaration of function 'readl'
| drivers/net/dnet.c: In function 'dnet_probe':
| drivers/net/dnet.c:873: error: implicit declaration of function 'ioremap'
| drivers/net/dnet.c:873: warning: assignment makes pointer from integer without a cast
| drivers/net/dnet.c:939: error: implicit declaration of function 'iounmap'

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-24 13:19:50 -07:00
Chris Mason
af4176b49c Btrfs: optimize fsyncs on old files
The fsync log has code to make sure all of the parents of a file are in the
log along with the file.  It uses a minimal log of the parent directory
inodes, just enough to get the parent directory on disk.

If the transaction that originally created a file is fully on disk,
and the file hasn't been renamed or linked into other directories, we
can safely skip the parent directory walk.  We know the file is on disk
somewhere and we can go ahead and just log that single file.

This is more important now because unrelated unlinks in the parent directory
might make us force a commit if we try to log the parent.

Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-03-24 16:14:52 -04:00
Chris Mason
12fcfd22fe Btrfs: tree logging unlink/rename fixes
The tree logging code allows individual files or directories to be logged
without including operations on other files and directories in the FS.
It tries to commit the minimal set of changes to disk in order to
fsync the single file or directory that was sent to fsync or O_SYNC.

The tree logging code was allowing files and directories to be unlinked
if they were part of a rename operation where only one directory
in the rename was in the fsync log.  This patch adds a few new rules
to the tree logging.

1) on rename or unlink, if the inode being unlinked isn't in the fsync
log, we must force a full commit before doing an fsync of the directory
where the unlink was done.  The commit isn't done during the unlink,
but it is forced the next time we try to log the parent directory.

Solution: record transid of last unlink/rename per directory when the
directory wasn't already logged.  For renames this is only done when
renaming to a different directory.

mkdir foo/some_dir
normal commit
rename foo/some_dir foo2/some_dir
mkdir foo/some_dir
fsync foo/some_dir/some_file

The fsync above will unlink the original some_dir without recording
it in its new location (foo2).  After a crash, some_dir will be gone
unless the fsync of some_file forces a full commit

2) we must log any new names for any file or dir that is in the fsync
log.  This way we make sure not to lose files that are unlinked during
the same transaction.

2a) we must log any new names for any file or dir during rename
when the directory they are being removed from was logged.

2a is actually the more important variant.  Without the extra logging
a crash might unlink the old name without recreating the new one

3) after a crash, we must go through any directories with a link count
of zero and redo the rm -rf

mkdir f1/foo
normal commit
rm -rf f1/foo
fsync(f1)

The directory f1 was fully removed from the FS, but fsync was never
called on f1, only its parent dir.  After a crash the rm -rf must
be replayed.  This must be able to recurse down the entire
directory tree.  The inode link count fixup code takes care of the
ugly details.

Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-03-24 16:14:52 -04:00
Chris Mason
a74ac32207 Btrfs: Make sure i_nlink doesn't hit zero too soon during log replay
During log replay, inodes are copied from the log to the main filesystem
btrees.  Sometimes they have a zero link count in the log but they actually
gain links during the replay or have some in the main btree.

This patch updates the link count to be at least one after copying the
inode out of the log.  This makes sure the inode is deleted during an
iput while the rest of the replay code is still working on it.

The log replay has fixup code to make sure that link counts are correct
at the end of the replay, so we could use any non-zero number here and
it would work fine.

Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-03-24 16:14:51 -04:00
Chris Mason
a4b6e07d1a Btrfs: limit balancing work while flushing delayed refs
The delayed reference mechanism is responsible for all updates to the
extent allocation trees, including those updates created while processing
the delayed references.

This commit tries to limit the amount of work that gets created during
the final run of delayed refs before a commit.  It avoids cowing new blocks
unless it is required to finish the commit, and so it avoids new allocations
that were not really required.

The goal is to avoid infinite loops where we are always making more work
on the final run of delayed refs.  Over the long term we'll make a
special log for the last delayed ref updates as well.

Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-03-24 16:14:51 -04:00
Chris Mason
5d13a98f3b Btrfs: readahead checksums during btrfs_finish_ordered_io
This reads in blocks in the checksum btree before starting the
transaction in btrfs_finish_ordered_io.  It makes it much more likely
we'll be able to do operations inside the transaction without
needing any btree reads, which limits transaction latencies overall.

Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-03-24 16:14:51 -04:00
Chris Mason
b9473439d3 Btrfs: leave btree locks spinning more often
btrfs_mark_buffer dirty would set dirty bits in the extent_io tree
for the buffers it was dirtying.  This may require a kmalloc and it
was not atomic.  So, anyone who called btrfs_mark_buffer_dirty had to
set any btree locks they were holding to blocking first.

This commit changes dirty tracking for extent buffers to just use a flag
in the extent buffer.  Now that we have one and only one extent buffer
per page, this can be safely done without losing dirty bits along the way.

This also introduces a path->leave_spinning flag that callers of
btrfs_search_slot can use to indicate they will properly deal with a
path returned where all the locks are spinning instead of blocking.

Many of the btree search callers now expect spinning paths,
resulting in better btree concurrency overall.

Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-03-24 16:14:28 -04:00
Chris Mason
89573b9c51 Btrfs: Only let very young transactions grow during commit
Commits are fairly expensive, and so btrfs has code to sit around for a while
during the commit and let new writers come in.

But, while we're sitting there, new delayed refs might be added, and those
can be expensive to process as well.  Unless the transaction is very very
young, it makes sense to go ahead and let the commit finish without hanging
around.

The commit grow loop isn't as important as it used to be, the fsync logging
code handles most performance critical syncs now.

Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-03-24 16:14:28 -04:00
Chris Mason
66d7e85ea7 Btrfs: Check for a blocking lock before taking the spin
This reduces contention on the extent buffer spin locks by testing for a
blocking lock before trying to take the spinlock.

Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-03-24 16:14:27 -04:00
Chris Mason
7f366cfecf Btrfs: reduce stack in cow_file_range
The fs/btrfs/inode.c code to run delayed allocation during writout
needed some stack usage optimization.  This is the first pass, it does
the check for compression earlier on, which allows us to do the common
(no compression) case higher up in the call chain.

Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-03-24 16:14:27 -04:00
Chris Mason
b7ec40d784 Btrfs: reduce stalls during transaction commit
To avoid deadlocks and reduce latencies during some critical operations, some
transaction writers are allowed to jump into the running transaction and make
it run a little longer, while others sit around and wait for the commit to
finish.

This is a bit unfair, especially when the callers that jump in do a bunch
of IO that makes all the others procs on the box wait.  This commit
reduces the stalls this produces by pre-reading file extent pointers
during btrfs_finish_ordered_io before the transaction is joined.

It also tunes the drop_snapshot code to politely wait for transactions
that have started writing out their delayed refs to finish.  This avoids
new delayed refs being flooded into the queue while we're trying to
close off the transaction.

Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-03-24 16:14:26 -04:00
Chris Mason
c3e69d58e8 Btrfs: process the delayed reference queue in clusters
The delayed reference queue maintains pending operations that need to
be done to the extent allocation tree.  These are processed by
finding records in the tree that are not currently being processed one at
a time.

This is slow because it uses lots of time searching through the rbtree
and because it creates lock contention on the extent allocation tree
when lots of different procs are running delayed refs at the same time.

This commit changes things to grab a cluster of refs for processing,
using a cursor into the rbtree as the starting point of the next search.
This way we walk smoothly through the rbtree.

Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-03-24 16:14:26 -04:00
Chris Mason
1887be66dc Btrfs: try to cleanup delayed refs while freeing extents
When extents are freed, it is likely that we've removed the last
delayed reference update for the extent.  This checks the delayed
ref tree when things are freed, and if no ref updates area left it
immediately processes the delayed ref.

Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-03-24 16:14:26 -04:00
Chris Mason
44871b1b24 Btrfs: reduce stack usage in some crucial tree balancing functions
Many of the tree balancing functions follow the same pattern.

1) cow a block
2) do something to the result

This commit breaks them up into two functions so the variables and
code required for part two don't suck down stack during part one.

Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-03-24 16:14:25 -04:00
Chris Mason
56bec294de Btrfs: do extent allocation and reference count updates in the background
The extent allocation tree maintains a reference count and full
back reference information for every extent allocated in the
filesystem.  For subvolume and snapshot trees, every time
a block goes through COW, the new copy of the block adds a reference
on every block it points to.

If a btree node points to 150 leaves, then the COW code needs to go
and add backrefs on 150 different extents, which might be spread all
over the extent allocation tree.

These updates currently happen during btrfs_cow_block, and most COWs
happen during btrfs_search_slot.  btrfs_search_slot has locks held
on both the parent and the node we are COWing, and so we really want
to avoid IO during the COW if we can.

This commit adds an rbtree of pending reference count updates and extent
allocations.  The tree is ordered by byte number of the extent and byte number
of the parent for the back reference.  The tree allows us to:

1) Modify back references in something close to disk order, reducing seeks
2) Significantly reduce the number of modifications made as block pointers
are balanced around
3) Do all of the extent insertion and back reference modifications outside
of the performance critical btrfs_search_slot code.

#3 has the added benefit of greatly reducing the btrfs stack footprint.
The extent allocation tree modifications are done without the deep
(and somewhat recursive) call chains used in the past.

These delayed back reference updates must be done before the transaction
commits, and so the rbtree is tied to the transaction.  Throttling is
implemented to help keep the queue of backrefs at a reasonable size.

Since there was a similar mechanism in place for the extent tree
extents, that is removed and replaced by the delayed reference tree.

Yan Zheng <yan.zheng@oracle.com> helped review and fixup this code.

Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-03-24 16:14:25 -04:00
Chris Mason
9fa8cfe706 Btrfs: don't preallocate metadata blocks during btrfs_search_slot
In order to avoid doing expensive extent management with tree locks held,
btrfs_search_slot will preallocate tree blocks for use by COW without
any tree locks held.

A later commit moves all of the extent allocation work for COW into
a delayed update mechanism, and this preallocation will no longer be
required.

Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-03-24 16:14:25 -04:00
Stefan Richter
40cf65d149 DVB: firedtv: fix printk format mismatch
Eliminate
drivers/media/dvb/firewire/firedtv-avc.c: In function 'debug_fcp':
drivers/media/dvb/firewire/firedtv-avc.c:156: warning: format '%d' expects type 'int', but argument 5 has type 'size_t'

Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-03-24 20:56:54 +01:00
Stefan Richter
c64094684d ieee1394: constify device ID tables
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-03-24 20:56:53 +01:00
Stefan Richter
421696887b ieee1394: raw1394: add sparse annotations to raw1394_compat_write
Eliminate the following warnings in raw1394_compat_write()'s error
return path, seen on x86-64 with CONFIG_COMPAT=y:

drivers/ieee1394/raw1394.c:381:17: warning: incorrect type in return expression (different address spaces)
drivers/ieee1394/raw1394.c:381:17:    expected char const [noderef] <asn:1>*
drivers/ieee1394/raw1394.c:381:17:    got void *
drivers/ieee1394/raw1394.c:2252:14: warning: incorrect type in argument 1 (different address spaces)
drivers/ieee1394/raw1394.c:2252:14:    expected void const *ptr
drivers/ieee1394/raw1394.c:2252:14:    got char const [noderef] <asn:1>*[assigned] buffer
drivers/ieee1394/raw1394.c:2253:19: warning: incorrect type in argument 1 (different address spaces)
drivers/ieee1394/raw1394.c:2253:19:    expected void const *ptr
drivers/ieee1394/raw1394.c:2253:19:    got char const [noderef] <asn:1>*[assigned] buffer

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-03-24 20:56:52 +01:00
Tobias Klauser
1c4fb577aa ieee1394: Storage class should be before const qualifier
The C99 specification states in section 6.11.5:

The placement of a storage-class specifier other than at the beginning
of the declaration specifiers in a declaration is an obsolescent
feature.

Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-03-24 20:56:52 +01:00
Stefan Richter
e90874f64c ieee1394: sbp2: follow up on "ieee1394: inherit ud vendor_id from node vendor_id"
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-03-24 20:56:52 +01:00
Stefan Richter
7889b60ee7 firewire: core: optimize propagation of BROADCAST_CHANNEL
Cache the test result of whether a device implements BROADCAST_CHANNEL.
This minimizes traffic on the bus after each bus reset.  A majority of
devices does not implement BROADCAST_CHANNEL.

Remove busy retries; just rely on the hardware to retry requests to busy
responders.  Remove unnecessary log messages.

Rename the flag is_irm to broadcast_channel_allocated to better reflect
its meaning.  Reset the flag earlier in fw_core_handle_bus_reset.

Pass the generation down as a call parameter; that way generation can't
be newer than card->broadcast_channel_allocated and device->node_id.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-03-24 20:56:52 +01:00
Stefan Richter
cbae787c0f firewire: core: simplify broadcast channel allocation
fw-iso.c has channel allocation code now, use it.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-03-24 20:56:51 +01:00
Stefan Richter
e1dc7cab43 firewire: core: increase bus manager grace period
Per IEEE 1394 clause 8.4.2.5, bus manager capable nodes which are not
incumbent shall wait at least 125ms before trying to establish
themselves as bus manager.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-03-24 20:56:51 +01:00
Stefan Richter
a38a00fdef firewire: core: drop unused call parameters of close_transaction
All callers inserted NULL and 0 here.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-03-24 20:56:51 +01:00
Stefan Richter
18e9b10fcd firewire: cdev: add closure to async stream ioctl
This changes the as yet unreleased FW_CDEV_IOC_SEND_STREAM_PACKET ioctl
to generate an fw_cdev_event_response event just like the other two
ioctls for asynchronous request transmission do.  This way, clients get
feedback on successful or unsuccessful transmission.

This also adds input validation for length, tag, channel, sy, speed.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-03-24 20:56:50 +01:00
Stefan Richter
664d8010b1 firewire: cdev: simplify FW_CDEV_IOC_SEND_REQUEST return value
This changes the ioctl() return value of FW_CDEV_IOC_SEND_REQUEST and of
the as yet unreleased FW_CDEV_IOC_SEND_BROADCAST_REQUEST.  They used to
return
	sizeof(struct fw_cdev_send_request *) + data_length

which is obviously a failed attempt to emulate the return value of
raw1394's respective interface which uses write() instead of ioctl().

However, the first summand, as size of a kernel pointer, is entirely
meaningless to clients and the second summand is already known to
clients.  And the result does not resemble raw1394's write() return
code anyway.

So simplify it to a constant non-negative value, i.e. 0.  The only
dangers here would be that future client implementations check for error
by ret != 0 instead of ret < 0 when running on top of an old kernel; or
that current clients interpret ret = 0 or more as failure.  But both are
hypothetical cases which don't justify to return irritating values.

While we touch this code, also remove "& 0x1f" from tcode in the call of
fw_send_request.  The tcode cannot be bigger than 0x1f at this point.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-03-24 20:56:50 +01:00