Add more docbook comments to network device functions and cleanup
the comments.
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
dev_change_name and netdev_drivername should use const char on
parameters that are read-only input values. The strcpy to newname is
not needed since newname is not used later in function.
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We're never supposed to shrink the headroom or tailroom. In fact,
shrinking the headroom is a fatal action.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
The number of BIOSes that have an option to enable the IOMMU, or fix
anything about its configuration, is vanishingly small. There's no good
reason to punish quiet boot for this.
Signed-off-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Also add debugging checks for LPT size and separate
out c->check_lpt_free from unrelated bitfields.
Signed-off-by: Adrian Hunter <ext-adrian.hunter@nokia.com>
Bulk-read skips uptodate pages but this was putting its
array index out and causing it to treat subsequent pages
as holes.
Signed-off-by: Adrian Hunter <ext-adrian.hunter@nokia.com>
Make garbage collection try to keep data nodes from the same
inode together and in ascending order. This improves
performance when reading those nodes especially when bulk-read
is used.
Signed-off-by: Adrian Hunter <ext-adrian.hunter@nokia.com>
sync_fs can be called even if the file system is mounted
read-only. Ensure the commit is not run in that case.
Reported-by: Zoltan Sogor <weth@inf.u-szeged.hu>
Signed-off-by: Adrian Hunter <ext-adrian.hunter@nokia.com>
Commit the journal when the FS is sync'ed. This will make
statfs provide better free space report. And we anyway
advice our users to sync the FS if they want better statfs
report.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
We cannot store bit-fields together if the processes which
change them may race, unless we serialize them.
Thus, move the nospc and nospc_rp bit-fields eway from
the mount option/constant bit-fields, to avoid races.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
The "bulk_read" and "no_chk_data_crc" have only 2 values -
0 and 1. We already have bit-fields in corresponding data
structers, so make "bulk_read" and "no_chk_data_crc"
bit-fields as well.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
When UBIFS switches to R/O mode because of an error,
it is reasonable to enable data CRC checking.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
When inserting into a full znode it is split into two
znodes. Because data node keys are usually consecutive,
it is better to try to keep them together. This patch
does a better job of that.
Signed-off-by: Adrian Hunter <ext-adrian.hunter@nokia.com>
UBIFS read performance can be improved by skipping the CRC
check when data nodes are read. This option can be used if
the underlying media is considered to be highly reliable.
Note that CRCs are always checked for metadata.
Read speed on Arm platform with OneNAND goes from 19 MiB/s
to 27 MiB/s with data CRC checking disabled.
Signed-off-by: Adrian Hunter <ext-adrian.hunter@nokia.com>
Some flash media are capable of reading sequentially at faster rates.
UBIFS bulk-read facility is designed to take advantage of that, by
reading in one go consecutive data nodes that are also located
consecutively in the same LEB.
Read speed on Arm platform with OneNAND goes from 17 MiB/s to
19 MiB/s.
Signed-off-by: Adrian Hunter <ext-adrian.hunter@nokia.com>
In case of error, the function kthread_create returns an ERR pointer,
but never returns a NULL pointer. So a NULL test that comes before an
IS_ERR test should be deleted.
The semantic match that finds this problem is as follows:
(http://www.emn.fr/x-info/coccinelle/)
// <smpl>
@match_bad_null_test@
expression x, E;
statement S1,S2;
@@
x = kthread_create(...)
... when != x = E
* if (x == NULL)
S1 else S2
// </smpl>
Signed-off-by: Julien Brunel <brunel@diku.dk>
Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
'ubifs_get_lprops()' and 'ubifs_release_lprops()' basically wrap
mutex lock and unlock. We have them because we want lprops subsystem
be separate and as independent as possible. And we planned better
locking rules for lprops.
Anyway, because they are short, it is better to inline them.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
IS_ERR() macro already has unlikely(), so do not use constructions
like 'if (unlikely(IS_ERR())'.
Signed-off-by: Hirofumi Nakagawa <hnakagawa@miraclelinux.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
This commit adds a reserved pool size print and tweaks the
prints to make them look nicer.
It also fixes and cleans-up some comments.
Additionally, it deletes some blank lines to make the code look
a little nicer.
In other words, nothing essential.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Xen options need to depend on XEN.
Also, add newline at end of file.
Without this patch you need to disable CONFIG_PM in order to
disable CPU hotplugging.
Signed-off-by: Chuck Ebbert <cebbert@redhat.com>
Acked-by Jeremy Fitzhardinge <jeremy@goop.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Export set_memory_ro() and set_memory_rw() calls for use by drivers that need
to have more debug information about who might be writing to memory space.
this was initially developed for use while debugging a memory corruption
problem with e1000e.
Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Back in prehistoric (pre-git!) days, the kernel's MSI-X support did
request_mem_region() on a device's MSI-X tables, which meant that a
driver that enabled MSI-X couldn't use pci_request_regions() (since
that would clash with the PCI layer's MSI-X request).
However, that was removed (by me!) years ago, so mthca can just use
pci_request_regions() and pci_release_regions() instead of its own
much more complicated code that avoids requesting the MSI-X tables.
Signed-off-by: Roland Dreier <rolandd@cisco.com>
Handle the case where posting a send is requested when the link is
down. This fixes <https://bugs.openfabrics.org/show_bug.cgi?id=1117>.
Signed-off-by: Yannick Cote <yannick.cote@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
I tracked down the shutdown regression to CPUs not dying
when being shut down during power-off. This turns out to
be due to the system_state being SYSTEM_POWER_OFF, which
this code doesn't take as a valid state for shutting off
CPUs in.
This has never made sense to me, but when I added hotplug
code to implement hibernate I only "made it work" and did
not question the need to check the system_state. Thomas
Gleixner helped me dig, but the only thing we found is
that it was added with the original commit that added CPU
hotplug support.
Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Acked-by: Joel Schopp <jschopp@austin.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
The PCI bridge on the Holly board is incorrectly represented in the
device tree. The current device tree node for the PCI bridge sits
under the tsi-bridge node. That's not obviously wrong, but the PCI
bridge translates some PCI spaces into CPU address ranges which were
not translated by the "ranges" property in tsi-bridge node.
We used to get away with this problem because the PCI bridge discovery
code was also buggy, assuming incorrectly that PCI host bridge nodes
were always directly under the root bus and treating the translated
addresses as raw CPU addresses, rather than parent bus addresses.
This has since been fixed, thus breaking Holly.
This could be fixed by adding extra translations to the tsi-bridge
node, but this patch instead moves the Holly PCI bridge out of the
tsi-bridge node to the root bus. This makes the tsi-bridge node
represent only the built-in IO devices in the bridge, with a
more-or-less contiguous address range. This is the same convention
used on Freescale SoC chips, where the "soc" node represents only the
IMMR region, and the PCI and other bus bridges are separate nodes
under the root bus.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Acked-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Delay exit to make sure we can actually get the optimal result in as
many cases as possible.
Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Initial fix for making sure that we can access percpu variables
in all C code (commit: 10617bbe84)
inadvertantly allocated the memory in the "percpu" section of
the vmlinux ELF executable. This confused kexec/dump.
Signed-off-by: Tony Luck <tony.luck@intel.com>
since commit ff7d9756b5
"nfsd: use static memory for callback program and stats"
do_probe_callback uses a static callback program
(NFS4_CALLBACK) rather than the one set in clp->cl_callback.cb_prog
as passed in by the client in setclientid (4.0)
or create_session (4.1).
This patches introduces rpc_create_args.prognumber that allows
overriding program->number when creating rpc_clnt.
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Now that cb_stats are static (since commit
ff7d9756b5)
there's no need to clear them.
Initially I thought it might make sense to do
that every callback probing but since the stats
are per-program and they are shared between possibly
several client callback instances, zeroing them out
seems like the wrong thing to do.
Note that that commit also introduced a bug
since stats.program is also being cleared in the process
and it is not restored after the memset as it used to be.
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
The RPCB XDR functions are used for multiple procedures. For instance,
rpcb_encode_getaddr() is used for RPCB_GETADDR, RPCB_SET, and
RPCB_UNSET. Make the XDR debug messages more generic so they are less
confusing.
And, unlike in other RPC consumers in the kernel, a single debug flag
enables all levels of debug messages in the RPC bind client, including
XDR debug messages. Since the XDR decoders already report success or
failure in this case, remove redundant debug messages in the mid-level
rpcb_register_call() function.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
With the new rpcbind code, a PMAP_UNSET will not have any effect on
services registered via rpcbind v3 or v4.
Implement a version of svc_unregister() that uses an RPCB_UNSET with
an empty netid string to make sure we have cleared *all* entries for
a kernel RPC service when shutting down, or before starting a fresh
instance of the service.
Use the new version only when CONFIG_SUNRPC_REGISTER_V4 is enabled;
otherwise, the legacy PMAP version is used to ensure complete
backwards-compatibility with the Linux portmapper daemon.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Clean up: When doing an RPCB_SET, make the kernel's rpcb client use the
shorthand "::" for the universal form of the IPv6 ANY address.
Without this patch, rpcbind will advertise:
0000:0000:0000:0000:0000:0000:0000:0000.x.y
This is cosmetic only. It cleans up the display of information from
/sbin/rpcinfo.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
TI-RPC is a user-space library of RPC functions that replaces ONC RPC
and allows RPC to operate in the new world of IPv6.
TI-RPC combines the concept of a transport protocol (UDP and TCP)
and a protocol family (PF_INET and PF_INET6) into a single identifier
called a "netid." For example, "udp" means UDP over IPv4, and "udp6"
means UDP over IPv6.
For rpcbind, then, the RPC service tuple that is registered and
advertised is:
[RPC program, RPC version, service address and port, netid]
instead of
[RPC program, RPC version, port, protocol]
Service address is typically ANYADDR, but can be a specific address
of one of the interfaces on a multi-homed host. The third item in
the new tuple is expressed as a universal address.
The current Linux rpcbind implementation registers a netid for both
protocol families when RPCB_SET is done for just the PF_INET6 version
of the netid (ie udp6 or tcp6). So registering "udp6" causes a
registration for "udp" to appear automatically as well.
We've recently determined that this is incorrect behavior. In the
TI-RPC world, "udp6" is not meant to imply that the registered RPC
service handles requests from AF_INET as well, even if the listener
socket does address mapping. "udp" and "udp6" are entirely separate
capabilities, and must be registered separately.
The Linux kernel, unlike TI-RPC, leverages address mapping to allow a
single listener socket to handle requests for both AF_INET and AF_INET6.
This is still OK, but the kernel currently assumes registering "udp6"
will cover "udp" as well. It registers only "udp6" for it's AF_INET6
services, even though they handle both AF_INET and AF_INET6 on the same
port.
So svc_register() actually needs to register both "udp" and "udp6"
explicitly (and likewise for TCP). Until rpcbind is fixed, the
kernel can ignore the return code for the second RPCB_SET call.
Please merge this with commit 15231312:
SUNRPC: Support IPv6 when registering kernel RPC services
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Cc: Olaf Kirch <okir@suse.de>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Clean up: Having two separate functions doesn't add clarity, so
eliminate one of them. Use contemporary kernel coding conventions
where appropriate.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Adopt an approach similar to the RPC server's auth cache (from Aurelien
Charbon and Brian Haley).
Note nlm_lookup_host()'s existing IP address hash function has the same
issue with correctness on little-endian systems as the original IPv4 auth
cache hash function, so I've also updated it with a hash function similar
to the new auth cache hash function.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
