For supporting 10Mps speed in SGMII mode DP83867_10M_SGMII_RATE_ADAPT bit
of DP83867_10M_SGMII_CFG register has to be cleared by software.
That does not affect speeds 100 and 1000 so can be done on init.
Signed-off-by: Max Uvarov <muvarov@gmail.com>
Cc: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Some boards do not have the PHY firmware programmed in the 3310's flash,
which leads to the PHY not working as expected. Warn the user when the
PHY fails to boot the firmware and refuse to initialise.
Fixes: 20b2af32ff ("net: phy: add Marvell Alaska X 88X3310 10Gigabit PHY support")
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Tested-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ensure that we supply the same phy interface mode to mac_link_down() as
we did for the corresponding mac_link_up() call. This ensures that MAC
drivers that use the phy interface mode in these methods can depend on
mac_link_down() always corresponding to a mac_link_up() call for the
same interface mode.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fix gcc build error while CONFIG_INET is not set
drivers/net/ethernet/stmicro/stmmac/stmmac_selftests.o: In function `__stmmac_test_loopback':
stmmac_selftests.c:(.text+0x8ec): undefined reference to `ip_send_check'
stmmac_selftests.c:(.text+0xacc): undefined reference to `udp4_hwcsum'
Add CONFIG_INET dependency to fix this.
Reported-by: Hulk Robot <hulkci@huawei.com>
Fixes: 091810dbde ("net: stmmac: Introduce selftests support")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
'res' is reassigned several times in the function and if we 'goto
error_unmap', its value is not the returned value of 'request_mem_region()'
anymore.
Introduce a new 'struct resource *' variable (i.e. res2) to keep a pointer
to the right resource, if needed in the error handling path.
Fixes: 4b4eda0017 ("Staging: media: Unmap and release region obtained by ioremap_nocache")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
There is a spelling mistake in a pr_err message. Fix it.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
A PF_EXITING task can stay associated with an offline css. If such
task calls task_get_css(), it can get stuck indefinitely. This can be
triggered by BSD process accounting which writes to a file with
PF_EXITING set when racing against memcg disable as in the backtrace
at the end.
After this change, task_get_css() may return a css which was already
offline when the function was called. None of the existing users are
affected by this change.
INFO: rcu_sched self-detected stall on CPU
INFO: rcu_sched detected stalls on CPUs/tasks:
...
NMI backtrace for cpu 0
...
Call Trace:
<IRQ>
dump_stack+0x46/0x68
nmi_cpu_backtrace.cold.2+0x13/0x57
nmi_trigger_cpumask_backtrace+0xba/0xca
rcu_dump_cpu_stacks+0x9e/0xce
rcu_check_callbacks.cold.74+0x2af/0x433
update_process_times+0x28/0x60
tick_sched_timer+0x34/0x70
__hrtimer_run_queues+0xee/0x250
hrtimer_interrupt+0xf4/0x210
smp_apic_timer_interrupt+0x56/0x110
apic_timer_interrupt+0xf/0x20
</IRQ>
RIP: 0010:balance_dirty_pages_ratelimited+0x28f/0x3d0
...
btrfs_file_write_iter+0x31b/0x563
__vfs_write+0xfa/0x140
__kernel_write+0x4f/0x100
do_acct_process+0x495/0x580
acct_process+0xb9/0xdb
do_exit+0x748/0xa00
do_group_exit+0x3a/0xa0
get_signal+0x254/0x560
do_signal+0x23/0x5c0
exit_to_usermode_loop+0x5d/0xa0
prepare_exit_to_usermode+0x53/0x80
retint_user+0x8/0x8
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: stable@vger.kernel.org # v4.2+
Fixes: ec438699a9 ("cgroup, block: implement task_get_css() and use it in bio_associate_current()")
platform_device_id are not supposed to change at runtime. All functions
working with platform_device_id provided by <linux/platform_device.h>
work with const platform_device_id. So mark the non-const structs as
const.
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Checkpatch reported warnings for use of embedded function names.
Use __func__ instead of embedded function names.
[mchehab+samsung@kernel.org: rebased on the top of upstream]
Signed-off-by: Diwakar Sharma <sharmalxmail@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
video_unregister_device() can be called on a never or an already
unregistered device. Drop the redundant check.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
devm functions are fine for managing resources that are directly related
to the device at hand and that have no other dependencies. However, a
process holding a file handle to a device created by a driver for a device
may result in the file handle left behind after the device is long gone.
This will result in accessing released (and potentially reallocated)
memory.
Instead, manage the memory resources in the driver. Releasing the
resources can be later on bound to e.g. by releasing a reference.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
This patch replaces bit shifting on 1 with the BIT(x) macro.
This was done with coccinelle:
@@
constant c;
@@
-1 << c
+BIT(c)
[mchehab+samsung@kernel.org: rebase on the top of upstream]
Signed-off-by: Arushi Singhal <arushisinghal19971997@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Fix to avoid possible memory leak if the decoder initialization
got failed.Free the allocated memory for file handle object
before return in case decoder initialization fails.
Signed-off-by: Shailendra Verma <shailendra.v@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
If blk_mq_init_allocated_queue() fails, make sure to free the poll
stat callback struct allocated.
Signed-off-by: Jes Sorensen <jsorensen@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This patch moves common code between rht_ptr and rht_ptr_exclusive
into __rht_ptr. It also adds a new helper rht_ptr_rcu exclusively
for the RCU case. This way rht_ptr becomes a lock-only construct
so we can use the lighter rcu_dereference_protected primitive.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fix the following sparse context imbalance regression introduced in
a patch that fixed sleeping function called from invalid context bug.
kbuild test robot reported on:
tree/branch: https://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb.git usb-linus
Regressions in current branch:
drivers/usb/usbip/stub_dev.c:399:9: sparse: sparse: context imbalance in 'stub_probe' - different lock contexts for basic block
drivers/usb/usbip/stub_dev.c:418:13: sparse: sparse: context imbalance in 'stub_disconnect' - different lock contexts for basic block
drivers/usb/usbip/stub_dev.c:464:1-10: second lock on line 476
Error ids grouped by kconfigs:
recent_errors
├── i386-allmodconfig
│ └── drivers-usb-usbip-stub_dev.c:second-lock-on-line
├── x86_64-allmodconfig
│ ├── drivers-usb-usbip-stub_dev.c:sparse:sparse:context-imbalance-in-stub_disconnect-different-lock-contexts-for-basic-block
│ └── drivers-usb-usbip-stub_dev.c:sparse:sparse:context-imbalance-in-stub_probe-different-lock-contexts-for-basic-block
└── x86_64-allyesconfig
└── drivers-usb-usbip-stub_dev.c:second-lock-on-line
This is a real problem in an error leg where spin_lock() is called on an
already held lock.
Fix the imbalance in stub_probe() and stub_disconnect().
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Fixes: 0c9e8b3cad ("usbip: usbip_host: fix BUG: sleeping function called from invalid context")
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Before the netdev is registered, calling netdev_info() will emit
something as "(unnamed net device) (uninitialized)", looks confusing.
Before this patch:
[ 3.155028] stmmaceth f7b60000.ethernet (unnamed net_device) (uninitialized): device MAC address 52:1a:55:18:9e:9d
After this patch:
[ 3.155028] stmmaceth f7b60000.ethernet: device MAC address 52:1a:55:18:9e:9d
Signed-off-by: Jisheng Zhang <Jisheng.Zhang@synaptics.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
There is a spelling mistake in a DP_INFO message. Fix it.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Michal Kalderon <michal.kalderon@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The sh_eth_close() resets the MAC and then calls phy_stop()
so that mdio read access result is incorrect without any error
according to kernel trace like below:
ifconfig-216 [003] .n.. 109.133124: mdio_access: ee700000.ethernet-ffffffff read phy:0x01 reg:0x00 val:0xffff
According to the hardware manual, the RMII mode should be set to 1
before operation the Ethernet MAC. However, the previous code was not
set to 1 after the driver issued the soft_reset in sh_eth_dev_exit()
so that the mdio read access result seemed incorrect. To fix the issue,
this patch adds a condition and set the RMII mode register in
sh_eth_dev_exit() for R-Car Gen2 and RZ/A1 SoCs.
Note that when I have tried to move the sh_eth_dev_exit() calling
after phy_stop() on sh_eth_close(), but it gets worse (kernel panic
happened and it seems that a register is accessed while the clock is
off).
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit 8bd9cb51da ("locking/atomics, asm-generic: Move some macros
from <linux/bitops.h> to a new <linux/bits.h> file") moved BIT_ULL()
into <linux/bits.h>. It only includes <asm/bitsperlong.h>, so there is
no longer "include file recursion hell".
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: linux-mips@vger.kernel.org
Cc: James Hogan <jhogan@kernel.org>
Cc: Huacai Chen <chenhc@lemote.com>
Cc: linux-kernel@vger.kernel.org
Cc: Ralf Baechle <ralf@linux-mips.org>
Fixes gcc '-Wunused-but-set-variable' warning:
arch/mips/kernel/uprobes.c: In function 'arch_uprobe_pre_xol':
arch/mips/kernel/uprobes.c:115:17: warning: variable 'epc' set but not used [-Wunused-but-set-variable]
It's never used since introduction in
commit 40e084a506 ("MIPS: Add uprobes support.")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: <ralf@linux-mips.org>
Cc: <jhogan@kernel.org>
Cc: <linux-kernel@vger.kernel.org>
Cc: <linux-mips@vger.kernel.org>
This Kselftest update for Linux 5.2-rc3 consists of
- Alexandre Belloni's fixes to rtc regressions introduced in kselftest
Makefile test run output refactoring work from Kees Cook.
- ftrace test checkbashisms fixes from Masami Hiramatsu
-----BEGIN PGP SIGNATURE-----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=zYD6
-----END PGP SIGNATURE-----
Merge tag 'linux-kselftest-5.2-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull Kselftest fixes from Shuah Khan:
- Alexandre Belloni's fixes to rtc regressions introduced in kselftest
Makefile test run output refactoring work from Kees Cook.
- ftrace test checkbashisms fixes from Masami Hiramatsu
* tag 'linux-kselftest-5.2-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests: rtc: rtctest: specify timeouts
selftests/harness: Allow test to configure timeout
selftests/ftrace: Add checkbashisms meta-testcase
selftests/ftrace: Make a script checkbashisms clean
This patch fixes a complain about possible sleep during
spinlock aquired
"BUG: sleeping function called from invalid context at
include/crypto/algapi.h:426"
for the ctr(aes) and ctr(des) s390 specific ciphers.
Instead of using a spinlock this patch introduces a mutex
which is save to be held in sleeping context. Please note
a deadlock is not possible as mutex_trylock() is used.
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Reported-by: Julian Wiedmann <jwi@linux.ibm.com>
Cc: stable@vger.kernel.org
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
The pistachio platform uses the U-Boot bootloader & generally boots a
kernel in the uImage format. As such it's useful to build one when
building the kernel, but to do so currently requires the user to
manually specify a uImage target on the make command line.
Make uImage.gz the pistachio platform's default build target, so that
the default is to build a kernel image that we can actually boot on a
board such as the MIPS Creator Ci40.
Marked for stable backport as far as v4.1 where pistachio support was
introduced. This is primarily useful for CI systems such as kernelci.org
which will benefit from us building a suitable image which can then be
booted as part of automated testing, extending our test coverage to the
affected stable branches.
Signed-off-by: Paul Burton <paul.burton@mips.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Kevin Hilman <khilman@baylibre.com>
Tested-by: Kevin Hilman <khilman@baylibre.com>
URL: https://groups.io/g/kernelci/message/388
Cc: stable@vger.kernel.org # v4.1+
Cc: linux-mips@vger.kernel.org
virt_addr_valid() really returns a boolean value, but currently uses an
integer to represent it. Switch to the bool type to make it clearer that
we really are returning a true or false value.
Signed-off-by: Paul Burton <paul.burton@mips.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Cc: linux-mips@vger.kernel.org
The virt_addr_valid() function is meant to return true iff
virt_to_page() will return a valid struct page reference. This is true
iff the address provided is found within the unmapped address range
between PAGE_OFFSET & MAP_BASE, but we don't currently check for that
condition. Instead we simply mask the address to obtain what will be a
physical address if the virtual address is indeed in the desired range,
shift it to form a PFN & then call pfn_valid(). This can incorrectly
return true if called with a virtual address which, after masking,
happens to form a physical address corresponding to a valid PFN.
For example we may vmalloc an address in the kernel mapped region
starting a MAP_BASE & obtain the virtual address:
addr = 0xc000000000002000
When masked by virt_to_phys(), which uses __pa() & in turn CPHYSADDR(),
we obtain the following (bogus) physical address:
addr = 0x2000
In a common system with PHYS_OFFSET=0 this will correspond to a valid
struct page which should really be accessed by virtual address
PAGE_OFFSET+0x2000, causing virt_addr_valid() to incorrectly return 1
indicating that the original address corresponds to a struct page.
This is equivalent to the ARM64 change made in commit ca219452c6
("arm64: Correctly bounds check virt_addr_valid").
This fixes fallout when hardened usercopy is enabled caused by the
related commit 517e1fbeb6 ("mm/usercopy: Drop extra
is_vmalloc_or_module() check") which removed a check for the vmalloc
range that was present from the introduction of the hardened usercopy
feature.
Signed-off-by: Paul Burton <paul.burton@mips.com>
References: ca219452c6 ("arm64: Correctly bounds check virt_addr_valid")
References: 517e1fbeb6 ("mm/usercopy: Drop extra is_vmalloc_or_module() check")
Reported-by: Julien Cristau <jcristau@debian.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: YunQiang Su <ysu@wavecomp.com>
URL: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=929366
Cc: stable@vger.kernel.org # v4.12+
Cc: linux-mips@vger.kernel.org
Cc: Yunqiang Su <ysu@wavecomp.com>
In cifs_read_allocate_pages, in case of ENOMEM, we go through
whole rdata->pages array but we have failed the allocation before
nr_pages, therefore we may end up calling put_page with NULL
pointer, causing oops
Signed-off-by: Roberto Bergantinos Corpas <rbergant@redhat.com>
Acked-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
CC: Stable <stable@vger.kernel.org>
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCXO303xQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qlb7AP4179SWPy9RFxvxyjTmpPFPL9oR0Q26
sOTyIBN99MUTsgEA0FNWz7/FWtFDa1wbh0tEVreaTQlKEeoIYF96dkN0iwE=
=BJgg
-----END PGP SIGNATURE-----
Merge tag 'trace-v5.2-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing fix from Steven Rostedt:
"This fixes a memory leak from the error path in the event filter
logic"
* tag 'trace-v5.2-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
tracing: Avoid memory leak in predicate_parse()
There are two functions in libbpf that support passing a log_level
parameter for the verifier for loading programs:
bpf_object__load_xattr() and bpf_prog_load_xattr(). Both accept an
attribute object containing the log_level, and apply it to the programs
to load.
It turns out that to effectively load the programs, the latter function
eventually relies on the former. This was not taken into account when
adding support for log_level in bpf_object__load_xattr(), and the
log_level passed to bpf_prog_load_xattr() later gets overwritten with a
zero value, thus disabling verifier logs for the program in all cases:
bpf_prog_load_xattr() // prog->log_level = attr1->log_level;
-> bpf_object__load() // attr2->log_level = 0;
-> bpf_object__load_xattr() // <pass prog and attr2>
-> bpf_object__load_progs() // prog->log_level = attr2->log_level;
Fix this by OR-ing the log_level in bpf_object__load_progs(), instead of
overwriting it.
v2: Fix commit log description (confusion on function names in v1).
Fixes: 60276f9849 ("libbpf: add bpf_object__load_xattr() API function to pass log_level")
Reported-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
The size of the vma can be larger than the size of the backing buffer.
Use the buffer size over vma size to prevent exposing extra memory
to userspace.
Signed-off-by: Andrew F. Davis <afd@ti.com>
Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
In dvb_init(), dev->dvb is allocated by kzalloc.
Therefore, it must be freed being set to NULL.
Signed-off-by: Young Xiao <92siuyang@gmail.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
This also populates the version member correctly.
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Give the RC device the name of the board rather than "1-2:1.0 IR".
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Fix the following compiler warning in pcitest:
pcitest.c: In function main:
pcitest.c:214:4: warning: too many arguments for
format [-Wformat-extra-args]
"usage: %s [options]\n"
Fixes: fbca0b284b ("tools: PCI: Add 'h' in optstring of getopt()")
Signed-off-by: Alan Mikhak <alan.mikhak@sifive.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Paul Walmsley <paul.walmsley@sifive.com>
pcitest is currently broken due to the following compiler error
and related warning. Fix by changing the run_test() function
signature to return an integer result.
pcitest.c: In function run_test:
pcitest.c:143:9: warning: return with a value, in function
returning void
return (ret < 0) ? ret : 1 - ret; /* return 0 if test succeeded */
pcitest.c: In function main:
pcitest.c:232:9: error: void value not ignored as it ought to be
return run_test(test);
Fixes: fef31ecaaf ("tools: PCI: Fix compilation warnings")
Signed-off-by: Alan Mikhak <alan.mikhak@sifive.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Paul Walmsley <paul.walmsley@sifive.com>
Remove leftover includes that are no longer used from the driver.
Reviewed-by: Firas JahJah <firasj@amazon.com>
Reviewed-by: Yossi Leybovich <sleybo@amazon.com>
Signed-off-by: Gal Pressman <galpress@amazon.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
When creating the chunks list the rdma_for_each_block() iterator is used
in order to iterate over the payload in EFA_CHUNK_PAYLOAD_SIZE (device
defined) strides.
Reviewed-by: Firas JahJah <firasj@amazon.com>
Reviewed-by: Yossi Leybovich <sleybo@amazon.com>
Reviewed-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Gal Pressman <galpress@amazon.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The admin commands abort flow is buggy (use-after-free) and not really
necessary as it is guaranteed that after ib_unregister_device() is called
there are no user verbs threads running in parallel, delete it.
Suggested-by: Jason Gunthorpe <jgg@ziepe.ca>
Reviewed-by: Firas JahJah <firasj@amazon.com>
Reviewed-by: Yossi Leybovich <sleybo@amazon.com>
Signed-off-by: Gal Pressman <galpress@amazon.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Use kvzalloc which attempts to allocate a physically continuous buffer and
fallbacks to virtually continuous on failure instead of open coding it in
the driver.
The is_vmalloc_addr function is used to determine whether the buffer is
physically continuous or not (which determines direct vs indirect MR
registration mode).
Suggested-by: Jason Gunthorpe <jgg@ziepe.ca>
Reviewed-by: Firas JahJah <firasj@amazon.com>
Reviewed-by: Yossi Leybovich <sleybo@amazon.com>
Signed-off-by: Gal Pressman <galpress@amazon.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
MAYEXEC test was mistakenly added, remove it. Checking MAYEXEC in the
driver prevents it from working with userspace that uses things like EXEC
STACK. (ie some Fortran and other runtimes)
Fixes: 40909f664d ("RDMA/efa: Add EFA verbs implementation")
Reported-by: Jason Gunthorpe <jgg@ziepe.ca>
Reviewed-by: Firas JahJah <firasj@amazon.com>
Reviewed-by: Yossi Leybovich <sleybo@amazon.com>
Signed-off-by: Gal Pressman <galpress@amazon.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The QCS404 platform contains a PCIe version 2.4.0 controller and a
Qualcomm PCIe2 PHY. The driver already supports version 2.4.0, for the
IPQ4019, but this support touches clocks and resets related to the PHY
as well and there's no upstream driver for the PHY.
On QCS404 we must initialize the PHY, so a separate PHY driver is
implemented to take care of this and the controller driver is updated to
not require the PHY related resources. This is done by relying on the
fact that operations in both the clock and reset framework are NOPs when
passed NULL, so we can isolate this change to only the
qcom_pcie_get_resources_2_4_0() function.
For QCS404 we also need to enable the AHB (iface) clock, in order to
access the register space of the controller, but as this is not part of
the IPQ4019 DT binding this is only added for new users of the 2.4.0
controller.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Niklas Cassel <niklas.cassel@linaro.org>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Acked-by: Stanimir Varbanov <svarbanov@mm-sol.com>
The Qualcomm QCS404 platform contains a PCIe controller, add this to the
Qualcomm PCI binding document. The controller is the same version as the
one used in IPQ4019, but the PHY part is described separately, hence the
difference in clocks and resets.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Before introducing the QCS404 platform, which uses the same PCIe
controller as IPQ4019, migrate this to use the bulk clock API, in order
to make the error paths slighly cleaner.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Niklas Cassel <niklas.cassel@linaro.org>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Acked-by: Stanimir Varbanov <svarbanov@mm-sol.com>
Commit 25c13324d0 ("IB/mlx5: Add steering SW ICM device memory type")
breaks i386 build by introducing three 64-bit divisions. As the divisor is
MLX5_SW_ICM_BLOCK_SIZE() which is always a power of 2, we can replace the
division with bit operations.
Fixes: 25c13324d0 ("IB/mlx5: Add steering SW ICM device memory type")
Signed-off-by: Michal Kubecek <mkubecek@suse.cz>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
A recent patch to hfi1 left behind a checkpatch error.
Fixes: fb24ea52f7 ("drivers: Remove explicit invocations of mmiowb()")
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
User applications can register memory regions for TID buffers that are not
aligned on page boundaries. Hfi1 is expected to pin those pages in memory
and cache the pages with mmu_rb. The rb tree will fail to insert pages
that are not aligned correctly.
Validate whether a given virtual address is page aligned before pinning.
Fixes: 7e7a436ecb ("staging/hfi1: Add TID entry program function body")
Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Kamenee Arumugam <kamenee.arumugam@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The command 'ibv_devinfo -v' reports 0 for max_mr.
Fix by assigning the query values after the mr lkey_table has been built
rather than early on in the driver.
Fixes: 7b1e2099ad ("IB/rdmavt: Move memory registration into rdmavt")
Reviewed-by: Josh Collier <josh.d.collier@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
