Few function pointers from phy_operations structure were unused.
This patch cleans those.
Signed-off-by: Sasha Neftin <sasha.neftin@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Collision threshold and threshold's shift has been defined twice.
This patch comes to fix that.
Signed-off-by: Sasha Neftin <sasha.neftin@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
In preparation to enabling -Wimplicit-fallthrough, mark switch cases
where we are expecting to fall through.
This patch fixes the following warning:
drivers/net/ethernet/intel/igb/e1000_82575.c: In function ‘igb_get_invariants_82575’:
drivers/net/ethernet/intel/igb/e1000_82575.c:636:6: warning: this statement may fall through [-Wimplicit-fallthrough=]
if (igb_sgmii_uses_mdio_82575(hw)) {
^
drivers/net/ethernet/intel/igb/e1000_82575.c:642:2: note: here
case E1000_CTRL_EXT_LINK_MODE_PCIE_SERDES:
^~~~
Warning level 3 was used: -Wimplicit-fallthrough=3
Notice that, in this particular case, the code comment is modified
in accordance with what GCC is expecting to find.
This patch is part of the ongoing efforts to enable
-Wimplicit-fallthrough.
Signed-off-by: "Gustavo A. R. Silva" <gustavo@embeddedor.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
In preparation to enabling -Wimplicit-fallthrough, mark switch cases
where we are expecting to fall through.
This patch fixes the following warning:
drivers/net/ethernet/intel/igb/igb_main.c: In function ‘__igb_notify_dca’:
drivers/net/ethernet/intel/igb/igb_main.c:6694:6: warning: this statement may fall through [-Wimplicit-fallthrough=]
if (dca_add_requester(dev) == 0) {
^
drivers/net/ethernet/intel/igb/igb_main.c:6701:2: note: here
case DCA_PROVIDER_REMOVE:
^~~~
Warning level 3 was used: -Wimplicit-fallthrough=3
Notice that, in this particular case, the code comment is modified
in accordance with what GCC is expecting to find.
This patch is part of the ongoing efforts to enable
-Wimplicit-fallthrough.
Signed-off-by: "Gustavo A. R. Silva" <gustavo@embeddedor.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Failed in read the HW register is very serious for igb/igc driver,
as its hw_addr will be set to NULL and cause the adapter be seen as
"REMOVED".
We saw the error only a few times in the MTBF test for suspend/resume,
but can hardly get any useful info to debug.
Adding WARN() so that we can get the necessary information about
where and how it happens, and use it for root causing and fixing
this "PCIe link lost issue"
This affects igb, igc.
Signed-off-by: Feng Tang <feng.tang@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Acked-by: Sasha Neftin <sasha.neftin@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
The field operator is ignored on several string fields. WATCH, DIR,
PERM and FILETYPE field operators are completely ignored and meaningless
since the op is not referenced in audit_filter_rules(). Range and
bitwise operators are already addressed in ghak73.
Honour the operator for WATCH, DIR, PERM, FILETYPE fields as is done in
the EXE field.
Please see github issue
https://github.com/linux-audit/audit-kernel/issues/114
Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Returning 1 from intel_pt_sync_switch() causes the current tid to be
set. That negates the need to keep next_tid anymore. Rationalize the
code to that effect.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/20190412113830.4126-9-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
sync_switch is a facility to synchronize decoding more closely with the
point in the kernel when the context actually switched.
Improve it by processing "context switch in" events.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/20190412113830.4126-8-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
pyside2 is the future for pyside support.
Note pyside use Qt4 whereas pyside2 uses Qt5.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/20190412113830.4126-6-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
pyside2 is the future for pyside support.
Note pyside use Qt4 whereas pyside2 uses Qt5.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/20190412113830.4126-5-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
pyside2 is the future for pyside support.
Note pyside use Qt4 whereas pyside2 uses Qt5.
Committer testing:
On a system with just:
# rpm -qa| grep -i pyside
python2-pyside-1.2.4-7.fc29.x86_64
#
Running:
$ python ~acme/libexec/perf-core/scripts/python/exported-sql-viewer.py ~/c/adrian.hunter/simple-retpoline.db &
[1] 7438
Makes it use the pyside 1 files:
$ grep -i pyside /proc/7438/maps | cut -d ' ' -f 6- | sort -u
/usr/lib64/libpyside-python2.7.so.1.2.4
/usr/lib64/python2.7/site-packages/PySide/QtCore.so
/usr/lib64/python2.7/site-packages/PySide/QtGui.so
/usr/lib64/python2.7/site-packages/PySide/QtSql.so
$ rpm -qf /usr/lib64/libpyside-python2.7.so.1.2.4
python2-pyside-1.2.4-7.fc29.x86_64
$
To get PySide2 I guess one needs to do:
$ pip install PySide2
But thats a 142MiB download I can't do right now, perhaps before pushing
upstream...
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/20190412113830.4126-4-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The argparse module makes it easier to add new arguments.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/20190412113830.4126-3-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Now that there is also support for python3, there is no need to specify
python2 explicitly.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/20190412113830.4126-2-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Move it from being a pr_warning() to a pr_debug(). Also capitalize BPF
and explain what gets missing when we're not able to synthesize these
events: we'll not be able to resolve symbols, etc.
Reported-by: Ingo Molnar <mingo@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexei Starovoitov <ast@fb.com>
Cc: Andrii Nakryiko <andrii.nakryiko@gmail.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: Yonghong Song <yhs@fb.com>
Link: https://lkml.kernel.org/n/tip-whpnfnw6xtd939odgt9bw9as@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Some distros put -fstack-protector-strong in the compiler flags to be
used to build python extensions, but then, the clang version in that
distro doesn't know about that, only gcc does.
Check if that is the case and remove it from the set of options used to
build the python binding with clang.
Case at hand:
oraclelinux:7
$ head -2 /etc/os-release
NAME="Oracle Linux Server"
VERSION="7.6"
$ grep stack-protector /usr/lib64/python2.7/_sysconfigdata.py | head -1 | cut -c-120
'CFLAGS': '-fno-strict-aliasing -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong --para
$
gcc version 4.8.5 20150623 (Red Hat 4.8.5-36.0.1) (GCC)
clang version 3.4.2 (tags/RELEASE_34/dot2-final)
clang: error: unknown argument: '-fstack-protector-strong'
clang: error: unknown argument: '-fstack-protector-strong'
error: command 'clang' failed with exit status 1
cp: cannot stat '/tmp/build/perf/python_ext_build/lib/perf*.so': No such file or directory
make[2]: *** [/tmp/build/perf/python/perf.so] Error 1
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-brmp2415zxpbhz45etkgjoma@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Some compilers will complain when using a member of a struct to
initialize another member, in the same struct initialization.
For instance:
debian:8 Debian clang version 3.5.0-10 (tags/RELEASE_350/final) (based on LLVM 3.5.0)
oraclelinux:7 clang version 3.4.2 (tags/RELEASE_34/dot2-final)
Produce:
ui/browsers/annotate.c:104:12: error: variable 'ops' is uninitialized when used within its own initialization [-Werror,-Wuninitialized]
(!ops.current_entry ||
^~~
1 error generated.
So use an extra variable, initialized just before that struct, to have
the value used in the expressions used to init two of the struct
members.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Fixes: c298304bd7 ("perf annotate: Use a ops table for annotation_line__write()")
Link: https://lkml.kernel.org/n/tip-f9nexro58q62l3o9hez8hr0i@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Return NULL instead of null-terminating version char array when fgets
fails due to end-of-file or error.
Signed-off-by: Donald Yandt <donald.yandt@gmail.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Yanmin Zhang <yanmin_zhang@linux.intel.com>
Fixes: 30ba5b0e66 ("perf machine: Null-terminate version char array upon fgets(/proc/version) error")
Link: http://lkml.kernel.org/r/20190528134128.30841-1-donald.yandt@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Bumping it from just 4:
Before:
$ perf -v
perf version 5.2.rc1.g80978f
$
After:
$ perf -v
perf version 5.2.rc1.g80978fc864c5
$
Requested-by: Ingo Molnar <mingo@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-p4yun2nxlo7eeeohyx5v4kw7@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
There's no need to display "ksymbol event with" text for the
PERF_RECORD_KSYMBOL event and "bpf event with" test for the
PERF_RECORD_BPF_EVENT event.
Remove it so it also goes along with other side-band events display.
Before:
# perf script --show-bpf-events
...
swapper 0 [000] 0.000000: PERF_RECORD_KSYMBOL ksymbol event with addr ffffffffc0ef971d len 229 type 1 flags 0x0 name bpf_prog_2a142ef67aaad174
swapper 0 [000] 0.000000: PERF_RECORD_BPF_EVENT bpf event with type 1, flags 0, id 36
After:
# perf script --show-bpf-events
...
swapper 0 [000] 0.000000: PERF_RECORD_KSYMBOL addr ffffffffc0ef971d len 229 type 1 flags 0x0 name bpf_prog_2a142ef67aaad174
swapper 0 [000] 0.000000: PERF_RECORD_BPF_EVENT type 1, flags 0, id 36
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stanislav Fomichev <sdf@google.com>
Link: http://lkml.kernel.org/r/20190508132010.14512-12-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add the --show-bpf-events command line option to show the eBPF related events:
PERF_RECORD_KSYMBOL
PERF_RECORD_BPF_EVENT
Usage:
# perf record -a
...
# perf script --show-bpf-events
...
swapper 0 [000] 0.000000: PERF_RECORD_KSYMBOL ksymbol event with addr ffffffffc0ef971d len 229 type 1 flags 0x0 name bpf_prog_2a142ef67aaad174
swapper 0 [000] 0.000000: PERF_RECORD_BPF_EVENT bpf event with type 1, flags 0, id 36
...
Committer testing:
# perf script --show-bpf-events | egrep -i 'PERF_RECORD_(BPF|KSY)'
0 PERF_RECORD_KSYMBOL ksymbol event with addr ffffffffc029a6c3 len 229 type 1 flags 0x0 name bpf_prog_7be49e3934a125ba
0 PERF_RECORD_BPF_EVENT bpf event with type 1, flags 0, id 47
0 PERF_RECORD_KSYMBOL ksymbol event with addr ffffffffc029c1ae len 229 type 1 flags 0x0 name bpf_prog_2a142ef67aaad174
0 PERF_RECORD_BPF_EVENT bpf event with type 1, flags 0, id 48
0 PERF_RECORD_KSYMBOL ksymbol event with addr ffffffffc02ddd1c len 229 type 1 flags 0x0 name bpf_prog_7be49e3934a125ba
0 PERF_RECORD_BPF_EVENT bpf event with type 1, flags 0, id 49
0 PERF_RECORD_KSYMBOL ksymbol event with addr ffffffffc02dfc11 len 229 type 1 flags 0x0 name bpf_prog_2a142ef67aaad174
0 PERF_RECORD_BPF_EVENT bpf event with type 1, flags 0, id 50
0 PERF_RECORD_KSYMBOL ksymbol event with addr ffffffffc045da0a len 229 type 1 flags 0x0 name bpf_prog_7be49e3934a125ba
0 PERF_RECORD_BPF_EVENT bpf event with type 1, flags 0, id 51
0 PERF_RECORD_KSYMBOL ksymbol event with addr ffffffffc04ef4b4 len 229 type 1 flags 0x0 name bpf_prog_2a142ef67aaad174
0 PERF_RECORD_BPF_EVENT bpf event with type 1, flags 0, id 52
0 PERF_RECORD_KSYMBOL ksymbol event with addr ffffffffc09e15da len 229 type 1 flags 0x0 name bpf_prog_7be49e3934a125ba
0 PERF_RECORD_BPF_EVENT bpf event with type 1, flags 0, id 53
0 PERF_RECORD_KSYMBOL ksymbol event with addr ffffffffc0d2b1a3 len 229 type 1 flags 0x0 name bpf_prog_2a142ef67aaad174
0 PERF_RECORD_BPF_EVENT bpf event with type 1, flags 0, id 54
0 PERF_RECORD_KSYMBOL ksymbol event with addr ffffffffc0fd9850 len 381 type 1 flags 0x0 name bpf_prog_819967866022f1e1_sys_enter
0 PERF_RECORD_BPF_EVENT bpf event with type 1, flags 0, id 179
0 PERF_RECORD_KSYMBOL ksymbol event with addr ffffffffc0feb1ec len 191 type 1 flags 0x0 name bpf_prog_c1bd85c092d6e4aa_sys_exit
0 PERF_RECORD_BPF_EVENT bpf event with type 1, flags 0, id 180
^C[root@quaco pt]# perf evlist
intel_pt//ku
dummy:u
#
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stanislav Fomichev <sdf@google.com>
Link: http://lkml.kernel.org/r/20190508132010.14512-11-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add map_groups__merge_in test to test the map_groups__merge_in function
usage - merging kcore maps into existing eBPF maps.
Committer testing:
# perf test merge
59: map_groups__merge_in : Ok
# perf test -v merge
59: map_groups__merge_in :
--- start ---
test child forked, pid 8349
test child finished with 0
---- end ----
map_groups__merge_in: Ok
#
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stanislav Fomichev <sdf@google.com>
Link: http://lkml.kernel.org/r/20190508132010.14512-10-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add BPF related code into DSO reading paths to return size (bpf_size)
and read the BPF code (bpf_read).
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stanislav Fomichev <sdf@google.com>
Link: http://lkml.kernel.org/r/20190508132010.14512-5-jolsa@kernel.org
[ Use uintptr_t when casting from u64 to u8 pointers ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
There's no need for the while loop now, also we can connect two (ret >
0) condition legs together.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Stanislav Fomichev <sdf@google.com>
Link: http://lkml.kernel.org/r/20190508132010.14512-4-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Move the file specific code in the dso_cache__read function to a
separate file_read function. I'll add BPF specific code in the following
patches.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stanislav Fomichev <sdf@google.com>
Link: http://lkml.kernel.org/r/20190508132010.14512-3-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Moving file specific code in dso__data_file_size function into separate
file_size function. I'll add bpf specific code in following patches.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stanislav Fomichev <sdf@google.com>
Link: http://lkml.kernel.org/r/20190508132010.14512-2-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The namespaces and comm fields of a thread are protected by rwsem and
require write access for it. So it ended up using a cast to remove
the const qualifier. Let's get rid of the const then.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Suggested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Hari Bathini <hbathini@linux.vnet.ibm.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Krister Johansen <kjlx@templeofstupid.com>
Link: http://lkml.kernel.org/r/20190527061149.168640-1-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Since 'perf record' already have this option, let's have it for 'perf top'
as well.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Hari Bathini <hbathini@linux.vnet.ibm.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Krister Johansen <kjlx@templeofstupid.com>
Link: http://lkml.kernel.org/r/20190522053250.207156-4-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
$ tools/perf/trace/beauty/sync_file_range.sh
static const char *sync_file_range_flags[] = {
[ilog2(1) + 1] = "WAIT_BEFORE",
[ilog2(2) + 1] = "WRITE",
[ilog2(4) + 1] = "WAIT_AFTER",
};
$
When all are the above are present, then we have something called
SYNC_FILE_RANGE_WRITE_AND_WAIT, that will be special cased in the
upcoming scnprintf beautifier for this flags arg.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Amir Goldstein <amir73il@gmail.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-uf2vd7bc8fkz65j7yit8dh84@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In addition to the older flags. This will allow something like this to
be implemented in 'perf trace"
perf trace -e clone/PIDFD in flags/
I.e. ask for strace like tracing, system wide, looking for 'clone'
syscalls that have the CLONE_PIDFD bit set in the 'flags' arg.
For now we'll just see PIDFD if it is set in the 'flags' arg.
Cc: Christian Brauner <christian@brauner.io>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-drq9h7s8gcv8b87064fp6lb0@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
So that one can just define a strarray and process it as a set of flags,
similar to syscall_arg__scnprintf_strarray() with plain arrays.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-nnt25wkpkow2w0yefhi6sb7q@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Use existing beautifiers for the first arg, fd, assigned using the
heuristic that looks for syscall arg names and associates SCA_FD with
'fd' named argumes, and wire up the recently introduced fsconfig cmd
table generator.
Now it should be possible to just use:
perf trace -e fsconfig
As root and see all fsconfig syscalls with its args beautified, more
work needed to look at the command and according to it handle the 'key',
'value' and 'aux' args, using the 'fcntl' and 'futex' beautifiers as a
starting point to see how to suppress sets of these last three args that
may not be used by the 'cmd' arg, etc.
# cat sys_fsconfig.c
#define _GNU_SOURCE /* See feature_test_macros(7) */
#include <unistd.h>
#include <sys/syscall.h> /* For SYS_xxx definitions */
#include <fcntl.h>
#define __NR_fsconfig 431
enum fsconfig_command {
FSCONFIG_SET_FLAG = 0, /* Set parameter, supplying no value */
FSCONFIG_SET_STRING = 1, /* Set parameter, supplying a string value */
FSCONFIG_SET_BINARY = 2, /* Set parameter, supplying a binary blob value */
FSCONFIG_SET_PATH = 3, /* Set parameter, supplying an object by path */
FSCONFIG_SET_PATH_EMPTY = 4, /* Set parameter, supplying an object by (empty) path */
FSCONFIG_SET_FD = 5, /* Set parameter, supplying an object by fd */
FSCONFIG_CMD_CREATE = 6, /* Invoke superblock creation */
FSCONFIG_CMD_RECONFIGURE = 7, /* Invoke superblock reconfiguration */
};
static inline int sys_fsconfig(int fd, int cmd, const char *key, const void *value, int aux)
{
syscall(__NR_fsconfig, fd, cmd, key, value, aux);
}
int main(int argc, char *argv[])
{
int fd = 0, aux = 0;
open("/foo", 0);
sys_fsconfig(fd++, FSCONFIG_SET_FLAG, "/foo1", "/bar1", aux++);
sys_fsconfig(fd++, FSCONFIG_SET_STRING, "/foo2", "/bar2", aux++);
sys_fsconfig(fd++, FSCONFIG_SET_BINARY, "/foo3", "/bar3", aux++);
sys_fsconfig(fd++, FSCONFIG_SET_PATH, "/foo4", "/bar4", aux++);
sys_fsconfig(fd++, FSCONFIG_SET_PATH_EMPTY, "/foo5", "/bar5", aux++);
sys_fsconfig(fd++, FSCONFIG_SET_FD, "/foo6", "/bar6", aux++);
sys_fsconfig(fd++, FSCONFIG_CMD_CREATE, "/foo7", "/bar7", aux++);
sys_fsconfig(fd++, FSCONFIG_CMD_RECONFIGURE, "/foo8", "/bar8", aux++);
return 0;
}
# trace -e fsconfig ./sys_fsconfig
fsconfig(0, FSCONFIG_SET_FLAG, 0x40201b, 0x402015, 0) = -1 EINVAL (Invalid argument)
fsconfig(1, FSCONFIG_SET_STRING, 0x402027, 0x402021, 1) = -1 EINVAL (Invalid argument)
fsconfig(2, FSCONFIG_SET_BINARY, 0x402033, 0x40202d, 2) = -1 EINVAL (Invalid argument)
fsconfig(3, FSCONFIG_SET_PATH, 0x40203f, 0x402039, 3) = -1 EBADF (Bad file descriptor)
fsconfig(4, FSCONFIG_SET_PATH_EMPTY, 0x40204b, 0x402045, 4) = -1 EBADF (Bad file descriptor)
fsconfig(5, FSCONFIG_SET_FD, 0x402057, 0x402051, 5) = -1 EINVAL (Invalid argument)
fsconfig(6, FSCONFIG_CMD_CREATE, 0x402063, 0x40205d, 6) = -1 EINVAL (Invalid argument)
fsconfig(7, FSCONFIG_CMD_RECONFIGURE, 0x40206f, 0x402069, 7) = -1 EINVAL (Invalid argument)
#
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-fb04b76cm59zfuv1wzu40uxy@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Use existing beautifiers for the first 2 args (dfd, path) and wire up
the recently introduced fspick flags table generator.
Now it should be possible to just use:
perf trace -e fspick
As root and see all move_mount syscalls with its args beautified, either
using the vfs_getname perf probe method or using the
augmented_raw_syscalls.c eBPF helper to get the pathnames, the other
args should work in all cases, i.e. all that is needed can be obtained
directly from the raw_syscalls:sys_enter tracepoint args.
# cat sys_fspick.c
#define _GNU_SOURCE /* See feature_test_macros(7) */
#include <unistd.h>
#include <sys/syscall.h> /* For SYS_xxx definitions */
#include <fcntl.h>
#define __NR_fspick 433
#define FSPICK_CLOEXEC 0x00000001
#define FSPICK_SYMLINK_NOFOLLOW 0x00000002
#define FSPICK_NO_AUTOMOUNT 0x00000004
#define FSPICK_EMPTY_PATH 0x00000008
static inline int sys_fspick(int fd, const char *path, int flags)
{
syscall(__NR_fspick, fd, path, flags);
}
int main(int argc, char *argv[])
{
int flags = 0, fd = 0;
open("/foo", 0);
sys_fspick(fd++, "/foo1", flags);
flags |= FSPICK_CLOEXEC;
sys_fspick(fd++, "/foo2", flags);
flags |= FSPICK_SYMLINK_NOFOLLOW;
sys_fspick(fd++, "/foo3", flags);
flags |= FSPICK_NO_AUTOMOUNT;
sys_fspick(fd++, "/foo4", flags);
flags |= FSPICK_EMPTY_PATH;
return sys_fspick(fd++, "/foo5", flags);
}
# perf trace -e fspick ./sys_fspick
LLVM: dumping /home/acme/git/perf/tools/perf/examples/bpf/augmented_raw_syscalls.o
fspick(0, "/foo1", 0) = -1 ENOENT (No such file or directory)
fspick(1, "/foo2", FSPICK_CLOEXEC) = -1 ENOENT (No such file or directory)
fspick(2, "/foo3", FSPICK_CLOEXEC|FSPICK_SYMLINK_NOFOLLOW) = -1 ENOENT (No such file or directory)
fspick(3, "/foo4", FSPICK_CLOEXEC|FSPICK_SYMLINK_NOFOLLOW|FSPICK_NO_AUTOMOUNT) = -1 ENOENT (No such file or directory)
fspick(4, "/foo5", FSPICK_CLOEXEC|FSPICK_SYMLINK_NOFOLLOW|FSPICK_NO_AUTOMOUNT|FSPICK_EMPTY_PATH) = -1 ENOENT (No such file or directory)
#
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-erau5xjtt8wvgnhvdbchstuk@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Use existing beautifiers for the first 4 args (to/from fds, pathnames)
and wire up the recently introduced move_mount flags table generator.
Now it should be possible to just use:
perf trace -e move_mount
As root and see all move_mount syscalls with its args beautified, except
for the filenames, that need work in the augmented_raw_syscalls.c eBPF
helper to pass more than one, see comment in the
augmented_raw_syscalls.c source code, the other args should work in all
cases, i.e. all that is needed can be obtained directly from the
raw_syscalls:sys_enter tracepoint args.
Running without the strace "skin" (.perfconfig setting output formatting
switches to look like strace output + BPF to collect strings, as we
still need to support collecting multiple string args for the same
syscall, like with move_mount):
# cat sys_move_mount.c
#define _GNU_SOURCE /* See feature_test_macros(7) */
#include <unistd.h>
#include <sys/syscall.h> /* For SYS_xxx definitions */
#define __NR_move_mount 429
#define MOVE_MOUNT_F_SYMLINKS 0x00000001 /* Follow symlinks on from path */
#define MOVE_MOUNT_F_AUTOMOUNTS 0x00000002 /* Follow automounts on from path */
#define MOVE_MOUNT_F_EMPTY_PATH 0x00000004 /* Empty from path permitted */
#define MOVE_MOUNT_T_SYMLINKS 0x00000010 /* Follow symlinks on to path */
#define MOVE_MOUNT_T_AUTOMOUNTS 0x00000020 /* Follow automounts on to path */
#define MOVE_MOUNT_T_EMPTY_PATH 0x00000040 /* Empty to path permitted */
static inline int sys_move_mount(int from_fd, const char *from_pathname,
int to_fd, const char *to_pathname,
int flags)
{
syscall(__NR_move_mount, from_fd, from_pathname, to_fd, to_pathname, flags);
}
int main(int argc, char *argv[])
{
int flags = 0, from_fd = 0, to_fd = 100;
sys_move_mount(from_fd++, "/foo", to_fd++, "bar", flags);
flags |= MOVE_MOUNT_F_SYMLINKS;
sys_move_mount(from_fd++, "/foo1", to_fd++, "bar1", flags);
flags |= MOVE_MOUNT_F_AUTOMOUNTS;
sys_move_mount(from_fd++, "/foo2", to_fd++, "bar2", flags);
flags |= MOVE_MOUNT_F_EMPTY_PATH;
sys_move_mount(from_fd++, "/foo3", to_fd++, "bar3", flags);
flags |= MOVE_MOUNT_T_SYMLINKS;
sys_move_mount(from_fd++, "/foo4", to_fd++, "bar4", flags);
flags |= MOVE_MOUNT_T_AUTOMOUNTS;
sys_move_mount(from_fd++, "/foo5", to_fd++, "bar5", flags);
flags |= MOVE_MOUNT_T_EMPTY_PATH;
return sys_move_mount(from_fd++, "/foo6", to_fd++, "bar6", flags);
}
# mv ~/.perfconfig ~/.perfconfig.OFF
# perf trace -e move_mount ./sys_move_mount
0.000 ( 0.009 ms): sys_move_mount/28971 move_mount(from_pathname: 0x402010, to_dfd: 100, to_pathname: 0x402015) = -1 ENOENT (No such file or directory)
0.011 ( 0.003 ms): sys_move_mount/28971 move_mount(from_dfd: 1, from_pathname: 0x40201e, to_dfd: 101, to_pathname: 0x402019, flags: F_SYMLINKS) = -1 ENOENT (No such file or directory)
0.016 ( 0.002 ms): sys_move_mount/28971 move_mount(from_dfd: 2, from_pathname: 0x402029, to_dfd: 102, to_pathname: 0x402024, flags: F_SYMLINKS|F_AUTOMOUNTS) = -1 ENOENT (No such file or directory)
0.020 ( 0.002 ms): sys_move_mount/28971 move_mount(from_dfd: 3, from_pathname: 0x402034, to_dfd: 103, to_pathname: 0x40202f, flags: F_SYMLINKS|F_AUTOMOUNTS|F_EMPTY_PATH) = -1 ENOENT (No such file or directory)
0.023 ( 0.002 ms): sys_move_mount/28971 move_mount(from_dfd: 4, from_pathname: 0x40203f, to_dfd: 104, to_pathname: 0x40203a, flags: F_SYMLINKS|F_AUTOMOUNTS|F_EMPTY_PATH|T_SYMLINKS) = -1 ENOENT (No such file or directory)
0.027 ( 0.002 ms): sys_move_mount/28971 move_mount(from_dfd: 5, from_pathname: 0x40204a, to_dfd: 105, to_pathname: 0x402045, flags: F_SYMLINKS|F_AUTOMOUNTS|F_EMPTY_PATH|T_SYMLINKS|T_AUTOMOUNTS) = -1 ENOENT (No such file or directory)
0.031 ( 0.017 ms): sys_move_mount/28971 move_mount(from_dfd: 6, from_pathname: 0x402055, to_dfd: 106, to_pathname: 0x402050, flags: F_SYMLINKS|F_AUTOMOUNTS|F_EMPTY_PATH|T_SYMLINKS|T_AUTOMOUNTS|T_EMPTY_PATH) = -1 ENOENT (No such file or directory)
#
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-83rim8g4k0s4gieieh5nnlck@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cut'n'paste error, the second comment is about the syscalls that have as
its second arg a string.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-zo5s6rloy42u41acsf6q3pvi@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We need to preserve eBPF maps even if they are covered by kcore, because
we need to access eBPF dso for source data.
Add the map_groups__merge_in function to do that. It merges a map into
map_groups by splitting the new map within the existing map regions.
Suggested-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stanislav Fomichev <sdf@google.com>
Link: http://lkml.kernel.org/r/20190508132010.14512-9-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
With pgoff set to zero, the map__map_ip function will return BPF
addresses based from 0, which is what we need when we read the data from
a BPF DSO.
Adding BPF symbols with mapped IP addresses as well.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stanislav Fomichev <sdf@google.com>
Link: http://lkml.kernel.org/r/20190508132010.14512-7-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Commit 4eb0681571 ("perf script: Make itrace script default to all
calls") does not work for the case when '--itrace' only is used, because
default_no_sample is not being passed.
Example:
Before:
$ perf record -e intel_pt/cyc/u ls
$ perf script --itrace > cmp1.txt
$ perf script --itrace=cepwx > cmp2.txt
$ diff -sq cmp1.txt cmp2.txt
Files cmp1.txt and cmp2.txt differ
After:
$ perf script --itrace > cmp1.txt
$ perf script --itrace=cepwx > cmp2.txt
$ diff -sq cmp1.txt cmp2.txt
Files cmp1.txt and cmp2.txt are identical
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: stable@vger.kernel.org
Fixes: 4eb0681571 ("perf script: Make itrace script default to all calls")
Link: http://lkml.kernel.org/r/20190520113728.14389-3-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Commit 4eb0681571 ("perf script: Make itrace script default to all
calls") does not work because 'use_browser' is being used to determine
whether to default to periodic sampling (i.e. better for perf report).
The result is that nothing but CBR events display for perf script when
no --itrace option is specified.
Fix by using 'default_no_sample' and 'inject' instead.
Example:
Before:
$ perf record -e intel_pt/cyc/u ls
$ perf script > cmp1.txt
$ perf script --itrace=cepwx > cmp2.txt
$ diff -sq cmp1.txt cmp2.txt
Files cmp1.txt and cmp2.txt differ
After:
$ perf script > cmp1.txt
$ perf script --itrace=cepwx > cmp2.txt
$ diff -sq cmp1.txt cmp2.txt
Files cmp1.txt and cmp2.txt are identical
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: stable@vger.kernel.org # v4.20+
Fixes: 90e457f7be ("perf tools: Add Intel PT support")
Link: http://lkml.kernel.org/r/20190520113728.14389-2-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The user's buildid cache may contain entries added by root even if root
has its own home directory (e.g. by using perfconfig to specify the same
buildid dir), so remove that validation.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/20190412113830.4126-7-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
During a suspend/resume, the xenwatch thread waits for all outstanding
xenstore requests and transactions to complete. This does not work
correctly for transactions started by userspace because it waits for
them to complete after freezing userspace threads which means the
transactions have no way of completing, resulting in a deadlock. This is
trivial to reproduce by running this script and then suspending the VM:
import pyxs, time
c = pyxs.client.Client(xen_bus_path="/dev/xen/xenbus")
c.connect()
c.transaction()
time.sleep(3600)
Even if this deadlock were resolved, misbehaving userspace should not
prevent a VM from being migrated. So, instead of waiting for these
transactions to complete before suspending, store the current generation
id for each transaction when it is started. The global generation id is
incremented during resume. If the caller commits the transaction and the
generation id does not match the current generation id, return EAGAIN so
that they try again. If the transaction was instead discarded, return OK
since no changes were made anyway.
This only affects users of the xenbus file interface. In-kernel users of
xenbus are assumed to be well-behaved and complete all transactions
before freezing.
Signed-off-by: Ross Lagerwall <ross.lagerwall@citrix.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Fixes gcc '-Wunused-but-set-variable' warning:
drivers/xen/pvcalls-front.c: In function pvcalls_front_sendmsg:
drivers/xen/pvcalls-front.c:543:25: warning: variable bedata set but not used [-Wunused-but-set-variable]
drivers/xen/pvcalls-front.c: In function pvcalls_front_recvmsg:
drivers/xen/pvcalls-front.c:638:25: warning: variable bedata set but not used [-Wunused-but-set-variable]
They are never used since introduction.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
BPF:
Jiri Olsa:
- Fixup determination of end of kernel map, to avoid having BPF programs,
that are after the kernel headers and just before module texts mixed up in
the kernel map.
tools UAPI header copies:
Arnaldo Carvalho de Melo:
- Update copy of files related to new fspick, fsmount, fsconfig, fsopen,
move_mount and open_tree syscalls.
- Sync cpufeatures.h, sched.h, fs.h, drm.h, i915_drm.h and kvm.h headers.
Namespaces:
Namhyung Kim:
- Add missing byte swap ops for namespace events when processing records from
perf.data files that could have been recorded in a arch with a different
endianness.
- Fix access to the thread namespaces list by using the namespaces_lock.
perf data:
Shawn Landden:
- Fix 'strncat may truncate' build failure with recent gcc.
s/390
Thomas Richter:
- Fix s390 missing module symbol and warning for non-root users in 'perf record'.
arm64:
Vitaly Chikunov:
- Fix mksyscalltbl when system kernel headers are ahead of the kernel.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQR2GiIUctdOfX2qHhGyPKLppCJ+JwUCXO1vsQAKCRCyPKLppCJ+
J5MrAQCrxsTz1Lc6GrStrMMX72BqmoEPzoCkmONCukVJCcXeEQEAzdz4I4/CNG3g
phtc030+Njnc8X5qpkR9kqSQuaPjWAk=
=1Fbq
-----END PGP SIGNATURE-----
Merge tag 'perf-urgent-for-mingo-5.2-20190528' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent
Pull perf/urgent fixes:
BPF:
Jiri Olsa:
- Fixup determination of end of kernel map, to avoid having BPF programs,
that are after the kernel headers and just before module texts mixed up in
the kernel map.
tools UAPI header copies:
Arnaldo Carvalho de Melo:
- Update copy of files related to new fspick, fsmount, fsconfig, fsopen,
move_mount and open_tree syscalls.
- Sync cpufeatures.h, sched.h, fs.h, drm.h, i915_drm.h and kvm.h headers.
Namespaces:
Namhyung Kim:
- Add missing byte swap ops for namespace events when processing records from
perf.data files that could have been recorded in a arch with a different
endianness.
- Fix access to the thread namespaces list by using the namespaces_lock.
perf data:
Shawn Landden:
- Fix 'strncat may truncate' build failure with recent gcc.
s/390
Thomas Richter:
- Fix s390 missing module symbol and warning for non-root users in 'perf record'.
arm64:
Vitaly Chikunov:
- Fix mksyscalltbl when system kernel headers are ahead of the kernel.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
