sun4i-ss does not handle requests when length are not a multiple of
blocksize.
This patch adds a fallback for that case.
Fixes: 6298e94821 ("crypto: sunxi-ss - Add Allwinner Security System crypto accelerator")
Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
When nbytes < 4, end is wronlgy set to a negative value which, due to
uint, is then interpreted to a large value leading to a deadlock in the
following code.
This patch fix this problem.
Fixes: 6298e94821 ("crypto: sunxi-ss - Add Allwinner Security System crypto accelerator")
Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
ECB algos does not need IV.
Fixes: 6298e94821 ("crypto: sunxi-ss - Add Allwinner Security System crypto accelerator")
Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch remove the test against areq->info since sun4i-ss could work
without it (ECB).
Fixes: 6298e94821 ("crypto: sunxi-ss - Add Allwinner Security System crypto accelerator")
Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch fixes the NITROX-V family part name format. The fix includes
ZIP core performance (feature option) in the part name to differentiate
various HW devices. The complete HW part name format is mentioned below
Part name: CNN55<core option>-<freq>BG676-<feature option>-<rev>
Signed-off-by: Nagadheeraj Rottela <rnagadheeraj@marvell.com>
Reviewed-by: Srikanth Jampala <jsrikanth@marvell.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
GCM detection logic has to change for two reasons:
-some CAAM instantiations with Era < 10, even though they have AES LP,
they now support GCM mode
-Era 10 upwards, there is a dedicated bit in AESA_VERSION[AESA_MISC]
field for GCM support
For Era 9 and earlier, all AES accelerator versions support GCM,
except for AES LP (CHAVID_LS[AESVID]=3) with revision CRNR[AESRN] < 8.
For Era 10 and later, bit 9 of the AESA_VERSION register should be used
to detect GCM support in AES accelerator.
Note: caam/qi and caam/qi2 are drivers for QI (Queue Interface), which
is used in DPAA-based SoCs; for now, we rely on CAAM having an AES HP
and this AES accelerator having support for GCM.
Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Reviewed-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
There is a spelling mistake in an error message in the qi_error_list
array. Fix this.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Mukesh Ojha <mojha@codeaurora.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The flags field in 'struct shash_desc' never actually does anything.
The only ostensibly supported flag is CRYPTO_TFM_REQ_MAY_SLEEP.
However, no shash algorithm ever sleeps, making this flag a no-op.
With this being the case, inevitably some users who can't sleep wrongly
pass MAY_SLEEP. These would all need to be fixed if any shash algorithm
actually started sleeping. For example, the shash_ahash_*() functions,
which wrap a shash algorithm with the ahash API, pass through MAY_SLEEP
from the ahash API to the shash API. However, the shash functions are
called under kmap_atomic(), so actually they're assumed to never sleep.
Even if it turns out that some users do need preemption points while
hashing large buffers, we could easily provide a helper function
crypto_shash_update_large() which divides the data into smaller chunks
and calls crypto_shash_update() and cond_resched() for each chunk. It's
not necessary to have a flag in 'struct shash_desc', nor is it necessary
to make individual shash algorithms aware of this at all.
Therefore, remove shash_desc::flags, and document that the
crypto_shash_*() functions can be called from any context.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The nx driver uses the MAY_SLEEP flag in shash_desc::flags as an
indicator to not retry sending the operation to the hardware as many
times before returning -EBUSY. This is bogus because (1) that's not
what the MAY_SLEEP flag is for, and (2) the shash API doesn't allow
failing if the hardware is busy anyway.
For now, just make it always retry the larger number of times. This
doesn't actually fix this driver, but it at least makes it not use the
shash_desc::flags field anymore. Then this field can be removed, as no
other drivers use it.
Cc: linuxppc-dev@lists.ozlabs.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The crypto_yield() in shash_ahash_digest() occurs after the entire
digest operation already happened, so there's no real point. Remove it.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
A genpd provider that uses the ->attach_dev() callback to look up
resources for a device fails to do so when the device has multiple
PM domains attached. That is because when genpd invokes the
->attach_dev() callback, it passes the allocated virtual device as
the in-parameter.
To address this problem, simply assign the dev->of_node for the
virtual device, based upon the original device's OF node.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Niklas Cassel <niklas.cassel@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
It's not correct to call kfree(dev) when device_register(dev) has failed.
Fix this by calling put_device(dev) instead.
Fixes: 3c095f32a9 ("PM / Domains: Add support for multi PM domains per device to genpd")
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Niklas Cassel <niklas.cassel@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
According to gtt_type_table[] function get_next_pt_type() may returns
GTT_TYPE_INVALID in some cases. To prevent driver to try to create memory
page with invalid data type, additional check is added.
Signed-off-by: Aleksei Gimbitskii <aleksei.gimbitskii@intel.com>
Cc: Zhenyu Wang <zhenyuw@linux.intel.com>
Cc: Zhi Wang <zhi.a.wang@intel.com>
Cc: Colin Xu <colin.xu@intel.com>
Reviewed-by: Colin Xu <colin.xu@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
For printing the intel_vgpu->id, a buffer with fixed length is allocated
on the stack. But if vgpu->id is greater than 6 characters, the buffer
overflow will happen. Even the string of the amount of max vgpu is less
that the length buffer right now, it's better to replace sprintf() with
snprintf().
v2:
- Increase the size of the buffer. (Colin Xu)
This patch fixed the critical issue #673 reported by klocwork.
Signed-off-by: Aleksei Gimbitskii <aleksei.gimbitskii@intel.com>
Cc: Zhenyu Wang <zhenyuw@linux.intel.com>
Cc: Zhi Wang <zhi.a.wang@intel.com>
Cc: Colin Xu <colin.xu@intel.com>
Reviewed-by: Colin Xu <colin.xu@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
In the code the memcpy() function copied uninitialized pointer in fb_info
to dmabuf_obj->info. Later the pointer in dmabuf_obj->info will be
initialized. To make the code aligned with requirements of the klocwork
static code analyzer, the uninitialized pointer should be initialized
before memcpy().
v2:
- Initialize fb_info.obj in vgpu_get_plane_info(). (Colin Xu)
This patch fixed the critical issue #632 reported by klockwork.
Signed-off-by: Aleksei Gimbitskii <aleksei.gimbitskii@intel.com>
Cc: Zhenyu Wang <zhenyuw@linux.intel.com>
Cc: Zhi Wang <zhi.a.wang@intel.com>
Cc: Colin Xu <colin.xu@intel.com>
Reviewed-by: Colin Xu <colin.xu@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Typedef is not recommended in the Linux kernel.The klocwork static code
analyzer takes the enumeration as the full range of intel_gvt_gtt_type_t.
But the intel_gvt_gtt_type_t will never be used in full range. For
example, the GTT_TYPE_INVALID will never be used as an index of an array.
Remove the typedef and let the enumeration starts from zero to pass
klocwork analysis.
This patch fixed the critial issues #483, #551, #665 reported by
klockwork.
v3:
- Remove the typedef and let the enumeration starts from zero.
Signed-off-by: Aleksei Gimbitskii <aleksei.gimbitskii@intel.com>
Cc: Zhenyu Wang <zhenyuw@linux.intel.com>
Cc: Zhi Wang <zhi.a.wang@intel.com>
CC: Colin Xu <colin.xu@intel.com>
Reviewed-by: Colin Xu <colin.xu@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
fb_info->size is in pages, but some function need bytes when it
is as a parameter. Such as:
a. intel_gvt_ggtt_validate_range(), according to function definition
b. vifio_device_gfx_plane_info->size, according to the comment of
its definition
So change fb_info->size into bytes.
v2: Keep fb_info->size in real size instead of assinging casted page
size(zhenyu)
v3: obj->size should be page aligned and delete redundant check(zhenyu)
Signed-off-by: Xiong Zhang <xiong.y.zhang@intel.com>
Reviewed-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
The err_remove_chip block is too coarse, and may perform cleanup that
must not be done. E.g. if of_gpiochip_add() fails, of_gpiochip_remove()
is still called, causing:
OF: ERROR: Bad of_node_put() on /soc/gpio@e6050000
CPU: 1 PID: 20 Comm: kworker/1:1 Not tainted 5.1.0-rc2-koelsch+ #407
Hardware name: Generic R-Car Gen2 (Flattened Device Tree)
Workqueue: events deferred_probe_work_func
[<c020ec74>] (unwind_backtrace) from [<c020ae58>] (show_stack+0x10/0x14)
[<c020ae58>] (show_stack) from [<c07c1224>] (dump_stack+0x7c/0x9c)
[<c07c1224>] (dump_stack) from [<c07c5a80>] (kobject_put+0x94/0xbc)
[<c07c5a80>] (kobject_put) from [<c0470420>] (gpiochip_add_data_with_key+0x8d8/0xa3c)
[<c0470420>] (gpiochip_add_data_with_key) from [<c0473738>] (gpio_rcar_probe+0x1d4/0x314)
[<c0473738>] (gpio_rcar_probe) from [<c052fca8>] (platform_drv_probe+0x48/0x94)
and later, if a GPIO consumer tries to use a GPIO from a failed
controller:
WARNING: CPU: 0 PID: 1 at lib/refcount.c:156 kobject_get+0x38/0x4c
refcount_t: increment on 0; use-after-free.
Modules linked in:
CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.1.0-rc2-koelsch+ #407
Hardware name: Generic R-Car Gen2 (Flattened Device Tree)
[<c020ec74>] (unwind_backtrace) from [<c020ae58>] (show_stack+0x10/0x14)
[<c020ae58>] (show_stack) from [<c07c1224>] (dump_stack+0x7c/0x9c)
[<c07c1224>] (dump_stack) from [<c0221580>] (__warn+0xd0/0xec)
[<c0221580>] (__warn) from [<c02215e0>] (warn_slowpath_fmt+0x44/0x6c)
[<c02215e0>] (warn_slowpath_fmt) from [<c07c58fc>] (kobject_get+0x38/0x4c)
[<c07c58fc>] (kobject_get) from [<c068b3ec>] (of_node_get+0x14/0x1c)
[<c068b3ec>] (of_node_get) from [<c0686f24>] (of_find_node_by_phandle+0xc0/0xf0)
[<c0686f24>] (of_find_node_by_phandle) from [<c0686fbc>] (of_phandle_iterator_next+0x68/0x154)
[<c0686fbc>] (of_phandle_iterator_next) from [<c0687fe4>] (__of_parse_phandle_with_args+0x40/0xd0)
[<c0687fe4>] (__of_parse_phandle_with_args) from [<c0688204>] (of_parse_phandle_with_args_map+0x100/0x3ac)
[<c0688204>] (of_parse_phandle_with_args_map) from [<c0471240>] (of_get_named_gpiod_flags+0x38/0x380)
[<c0471240>] (of_get_named_gpiod_flags) from [<c046f864>] (gpiod_get_from_of_node+0x24/0xd8)
[<c046f864>] (gpiod_get_from_of_node) from [<c0470aa4>] (devm_fwnode_get_index_gpiod_from_child+0xa0/0x144)
[<c0470aa4>] (devm_fwnode_get_index_gpiod_from_child) from [<c05f425c>] (gpio_keys_probe+0x418/0x7bc)
[<c05f425c>] (gpio_keys_probe) from [<c052fca8>] (platform_drv_probe+0x48/0x94)
Fix this by splitting the cleanup block, and adding a missing call to
gpiochip_irqchip_remove().
Fixes: 28355f8196 ("gpio: defer probe if pinctrl cannot be found")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Mukesh Ojha <mojha@codeaurora.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Remove the check for IOMMU presence since it was considered a
layer violation.
This means we have no reliable way to destinguish between coherent
hardware IOMMU DMA address translations and incoherent SWIOTLB DMA
address translations, which we can't handle. So always presume the
former. This means that if anybody forces SWIOTLB without also setting
the vmw_force_coherent=1 vmwgfx option, driver operation will fail,
like it will on most other graphics drivers.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Mel Gorman says:
"32-bit NUMA systems should be non-existent in practice. The last NUMA
system I'm aware of that was both NUMA and 32-bit only died somewhere
between 2004 and 2007. If someone is running a 64-bit capable system in
32-bit mode with NUMA, they really are just punishing themselves for fun."
Mark DISCONTIGMEM broken for now as suggested by Christoph Hellwig,
and (hopefully) remove it in a couple of releases.
Suggested-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Acked-by: Mel Gorman <mgorman@techsingularity.net>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@surriel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-mm@kvack.org
Link: http://lkml.kernel.org/r/1556112252-9339-3-git-send-email-rppt@linux.ibm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Sparsemem has been a default memory model for x86-64 for over a decade,
since:
b263295dbf ("x86: 64-bit, make sparsemem vmemmap the only memory model").
Make it the default for 32-bit NUMA systems (if there any left) as well.
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Acked-by: Mel Gorman <mgorman@techsingularity.net>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@surriel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-mm@kvack.org
Link: http://lkml.kernel.org/r/1556112252-9339-2-git-send-email-rppt@linux.ibm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Kaby Lake (and Coffee Lake) has PC8/PC9/PC10 residency counters.
This patch updates the list of Kaby/Coffee Lake PMU event counters
from the snb_cstates[] list of events to the hswult_cstates[]
list of events, which keeps all previously supported events and
also adds the PKG_C8, PKG_C9 and PKG_C10 residency counters.
This allows user space tools to profile them through the perf interface.
Signed-off-by: Harry Pan <harry.pan@intel.com>
Cc: <stable@vger.kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: gs0622@gmail.com
Link: http://lkml.kernel.org/r/20190424145033.1924-1-harry.pan@intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
It was noted that we made the same mistake for VM_ID as for object
handles, whereby we ensured that we only allocated a single handle for
one ppgtt. This has the unfortunate consequence for userspace that they
need to reference count the handles to avoid destroying an active ID. If
we allow multiple handles to the same ppgtt, userspace can freely
unreference any handle they own without fear of destroying the same
handle in use elsewhere.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190425054333.27299-1-chris@chris-wilson.co.uk
Instead of adding a new machine option to disable/enable the keywrapping
options of pckmo (like for AES and DEA) we can now use the CPU model to
decide. As ECC is also wrapped with the AES key we need that to be
enabled.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
This enables stfle.151 and adds the subfunctions for DFLTCC. Bit 151 is
added to the list of facilities that will be enabled when there is no
cpu model involved as DFLTCC requires no additional handling from
userspace, e.g. for migration.
Please note that a cpu model enabled user space can and will have the
final decision on the facility bits for a guests.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Collin Walling <walling@linux.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
In order to separate the reservation phase of building a request from
its emission phase, we need to pull some of the request alloc activities
from deep inside i915_request to the surface, GEM_EXECBUFFER.
v2: Be frivolous, use a local drm_i915_private.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190425050143.811-1-chris@chris-wilson.co.uk
Pull networking fixes from David Miller:
"Just the usual assortment of small'ish fixes:
1) Conntrack timeout is sometimes not initialized properly, from
Alexander Potapenko.
2) Add a reasonable range limit to tcp_min_rtt_wlen to avoid
undefined behavior. From ZhangXiaoxu.
3) des1 field of descriptor in stmmac driver is initialized with the
wrong variable. From Yue Haibing.
4) Increase mlxsw pci sw reset timeout a little bit more, from Ido
Schimmel.
5) Match IOT2000 stmmac devices more accurately, from Su Bao Cheng.
6) Fallback refcount fix in TLS code, from Jakub Kicinski.
7) Fix max MTU check when using XDP in mlx5, from Maxim Mikityanskiy.
8) Fix recursive locking in team driver, from Hangbin Liu.
9) Fix tls_set_device_offload_Rx() deadlock, from Jakub Kicinski.
10) Don't use napi_alloc_frag() outside of softiq context of socionext
driver, from Ilias Apalodimas.
11) MAC address increment overflow in ncsi, from Tao Ren.
12) Fix a regression in 8K/1M pool switching of RDS, from Zhu Yanjun.
13) ipv4_link_failure has to validate the headers that are actually
there because RAW sockets can pass in arbitrary garbage, from Eric
Dumazet"
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (43 commits)
ipv4: add sanity checks in ipv4_link_failure()
net/rose: fix unbound loop in rose_loopback_timer()
rxrpc: fix race condition in rxrpc_input_packet()
net: rds: exchange of 8K and 1M pool
net: vrf: Fix operation not supported when set vrf mac
net/ncsi: handle overflow when incrementing mac address
net: socionext: replace napi_alloc_frag with the netdev variant on init
net: atheros: fix spelling mistake "underun" -> "underrun"
spi: ST ST95HF NFC: declare missing of table
spi: Micrel eth switch: declare missing of table
net: stmmac: move stmmac_check_ether_addr() to driver probe
netfilter: fix nf_l4proto_log_invalid to log invalid packets
netfilter: never get/set skb->tstamp
netfilter: ebtables: CONFIG_COMPAT: drop a bogus WARN_ON
Documentation: decnet: remove reference to CONFIG_DECNET_ROUTE_FWMARK
dt-bindings: add an explanation for internal phy-mode
net/tls: don't leak IV and record seq when offload fails
net/tls: avoid potential deadlock in tls_set_device_offload_rx()
selftests/net: correct the return value for run_afpackettests
team: fix possible recursive locking when add slaves
...
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQUwxxKyE5l/npt8ARiEGxRG/Sl2wUCXMC1JAAKCRBiEGxRG/Sl
2wqGAQDgquetrxSJZ92rP4H6YRfAH7W6XDIYM9+lwUoc7u24ZgEAvbkOAJEKPapn
09bmRYE5sNsqNtKiqwxfkCQbgzo1XAg=
=lJEd
-----END PGP SIGNATURE-----
Merge tag 'leds-for-5.1-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds
Pull LED update from Jacek Anaszewski:
"A single change to MAINTAINERS:
We announce a new LED reviewer - Dan Murphy"
* tag 'leds-for-5.1-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds:
MAINTAINERS: LEDs: Add designated reviewer for LED subsystem
Before bootmem was completely removed from the kernel, the last loop
in the bootmem_init() had been used to reserve the correspondingly
marked regions, initialize sparsemem sections and to free the low memory
pages, which then would be used for early memory allocations. After the
bootmem removing patchset had been merged the loop was left to do the first
two things only. But it didn't do them quite well.
First of all it leaves the BOOT_MEM_INIT_RAM memory types unreserved,
which is definitely bug (although it isn't noticeable due to being used
by the kernel region only, which is fully marked as reserved). Secondly
the reservation is supposed to be done for any memory including the
high one. (I couldn't figure out why the highmem was ignored in the first
place, since platforms and dts' may declare any memory region for
reservation) Thirdly the reserved_end variable had been used here to not
accidentally free memory occupied by kernel. Since we already reserved the
corresponding region higher in this method there is no need in using the
variable here anymore. Fourthly the sparsemem should be aware of all the
memory types in the system including the ROM_DATA even if it is going to
be reserved for the whole system uptime. Finally after all these notes are
fixed the loop of memory reservation can be freely merged into the memory
installation loop as it's done in this patch.
Signed-off-by: Serge Semin <fancer.lancer@gmail.com>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: James Hogan <jhogan@kernel.org>
Cc: Matt Redfearn <matt.redfearn@mips.com>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Thomas Bogendoerfer <tbogendoerfer@suse.de>
Cc: Huacai Chen <chenhc@lemote.com>
Cc: Stefan Agner <stefan@agner.ch>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: linux-mips@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
There is a pointless code left in the bootmem_init() method since
the bootmem allocator removal. First part resides the PFN ranges
calculation loop. The conditional expressions and continue operator
are useless there, since nothing is done after them. Second part is
in RAM ranges installation loop. We can simplify the conditions cascade
a bit without much of the logic redefinition, so to reduce the code
length. In particular the end boundary value can be verified after
the possible reduction to be below max_low_pfn.
Signed-off-by: Serge Semin <fancer.lancer@gmail.com>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: James Hogan <jhogan@kernel.org>
Cc: Matt Redfearn <matt.redfearn@mips.com>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Thomas Bogendoerfer <tbogendoerfer@suse.de>
Cc: Huacai Chen <chenhc@lemote.com>
Cc: Stefan Agner <stefan@agner.ch>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: linux-mips@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Current MIPS platform code makes sure the kernel text, data and init
sections are added to the boot memory map pool right after the
arch-specific memory setup method has been executed. But for some reason
the MIPS platform code skipped the kernel .bss section, which definitely
should be in the boot mem pool as well in any case. Lets fix this just be
adding the space between __bss_start and __bss_stop.
Reviewed-by: Matt Redfearn <matt.redfearn@mips.com>
Signed-off-by: Serge Semin <fancer.lancer@gmail.com>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: James Hogan <jhogan@kernel.org>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Thomas Bogendoerfer <tbogendoerfer@suse.de>
Cc: Huacai Chen <chenhc@lemote.com>
Cc: Stefan Agner <stefan@agner.ch>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: linux-mips@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
In the current scheme, on submitting a request we take a single global
GEM wakeref, which trickles down to wake up all GT power domains. This
is undesirable as we would like to be able to localise our power
management to the available power domains and to remove the global GEM
operations from the heart of the driver. (The intent there is to push
global GEM decisions to the boundary as used by the GEM user interface.)
Now during request construction, each request is responsible via its
logical context to acquire a wakeref on each power domain it intends to
utilize. Currently, each request takes a wakeref on the engine(s) and
the engines themselves take a chipset wakeref. This gives us a
transition on each engine which we can extend if we want to insert more
powermangement control (such as soft rc6). The global GEM operations
that currently require a struct_mutex are reduced to listening to pm
events from the chipset GT wakeref. As we reduce the struct_mutex
requirement, these listeners should evaporate.
Perhaps the biggest immediate change is that this removes the
struct_mutex requirement around GT power management, allowing us greater
flexibility in request construction. Another important knock-on effect,
is that by tracking engine usage, we can insert a switch back to the
kernel context on that engine immediately, avoiding any extra delay or
inserting global synchronisation barriers. This makes tracking when an
engine and its associated contexts are idle much easier -- important for
when we forgo our assumed execution ordering and need idle barriers to
unpin used contexts. In the process, it means we remove a large chunk of
code whose only purpose was to switch back to the kernel context.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190424200717.1686-5-chris@chris-wilson.co.uk
Start acquiring the logical intel_context and using that as our primary
means for request allocation. This is the initial step to allow us to
avoid requiring struct_mutex for request allocation along the
perma-pinned kernel context, but it also provides a foundation for
breaking up the complex request allocation to handle different scenarios
inside execbuf.
For the purpose of emitting a request from inside retirement (see the
next patch for engine power management), we also need to lift control
over the timeline mutex to the caller.
v2: Note that the request carries the active reference upon construction.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190424200717.1686-4-chris@chris-wilson.co.uk
We wish to start segregating the power management into different control
domains, both with respect to the hardware and the user interface. The
first step is that at the lowest level flow of requests, we want to
process a context event (and not a global GEM operation). In this patch,
we introduce the context callbacks that in future patches will be
redirected to per-engine interfaces leading to global operations as
required.
The intent is that this will be guarded by the timeline->mutex, except
that retiring has not quite finished transitioning over from being
guarded by struct_mutex. So at the moment it is protected by
struct_mutex with a reminded to switch.
v2: Rename default handlers to intel_context_enter_engine.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190424200717.1686-3-chris@chris-wilson.co.uk
For controlling runtime pm of the GT and engines, we would like to have
a callback to do extra work the first time we wake up and the last time
we drop the wakeref. This first/last access needs serialisation and so
we encompass a mutex with the regular intel_wakeref_t tracker.
v2: Drop the _once naming and report the errors.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc; Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190424200717.1686-1-chris@chris-wilson.co.uk
After patch "drm: Use the same mmap-range offset and size for GEM and
TTM", application failed to create bo of system memory because drm
mmap_range size decrease to 64GB from original 1TB. This is not big
enough for applications. Increase the drm mmap_range size to 1TB.
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190417221507.933-1-Philip.Yang@amd.com
(cherry picked from commit 96354b5ca4)
CONFIG_INIT_STACK_ALL turns on stack initialization based on
-ftrivial-auto-var-init in Clang builds, which has greater coverage
than CONFIG_GCC_PLUGINS_STRUCTLEAK_BYREF_ALL.
-ftrivial-auto-var-init Clang option provides trivial initializers for
uninitialized local variables, variable fields and padding.
It has three possible values:
pattern - uninitialized locals are filled with a fixed pattern
(mostly 0xAA on 64-bit platforms, see https://reviews.llvm.org/D54604
for more details, but 0x000000AA for 32-bit pointers) likely to cause
crashes when uninitialized value is used;
zero (it's still debated whether this flag makes it to the official
Clang release) - uninitialized locals are filled with zeroes;
uninitialized (default) - uninitialized locals are left intact.
This patch uses only the "pattern" mode when CONFIG_INIT_STACK_ALL is
enabled.
Developers have the possibility to opt-out of this feature on a
per-variable basis by using __attribute__((uninitialized)), but such
use should be well justified in comments.
Co-developed-by: Alexander Potapenko <glider@google.com>
Signed-off-by: Alexander Potapenko <glider@google.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Tested-by: Alexander Potapenko <glider@google.com>
Acked-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Right now kernel hardening options are scattered around various Kconfig
files. This can be a central place to collect these kinds of options
going forward. This is initially populated with the memory initialization
options from the gcc-plugins.
Signed-off-by: Kees Cook <keescook@chromium.org>
Acked-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Start partitioning off the code that talks to the hardware (GT) from the
uapi layers and move the device facing code under gt/
One casualty is s/intel_ringbuffer.h/intel_engine.h/ with the plan to
subdivide that header and body further (and split out the submission
code from the ringbuffer and logical context handling). This patch aims
to be simple motion so git can fixup inflight patches with little mess.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190424174839.7141-1-chris@chris-wilson.co.uk
Introducing new TIR creation core API which allows caller
to receive back from the call the full command outbox.
This comes as a preparation for the next patch that will
retrieve the TIR ICM address from the command outbox.
Signed-off-by: Ariel Levkovich <lariel@mellanox.com>
Reviewed-by: Eli Cohen <eli@mellanox.com>
Reviewed-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Adding the TIR ICM address to the create_tir command outbox
through which the device reports the ICM address of the newly
created TIR.
The TIR address can be used for direct attachment to a steering
rule in SW managed steering mode.
Signed-off-by: Ariel Levkovich <lariel@mellanox.com>
Reviewed-by: Eli Cohen <eli@mellanox.com>
Reviewed-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Add SW ICM related fields to the device memory capabilities
structure and sw ownership capability in flow table properties.
The currently supported SW ICM types are steering and header modify
and the changes exposes the device memory capabilities for each
of these two types.
SW ICM memory can be allocated by SW and then be accessed by RDMA
operations for direct management of the HW packet handling tables.
Signed-off-by: Ariel Levkovich <lariel@mellanox.com>
Reviewed-by: Eli Cohen <eli@mellanox.com>
Reviewed-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Jason Gunthorpe says:
====================
Upon review it turns out there are some long standing problems in BAR
mapping area:
* BAR pages intended for read-only can be switched to writable via mprotect.
* Missing use of rdma_user_mmap_io for the mlx5 clock BAR page.
* Disassociate causes SIGBUS when touching the pages.
* CPU pages are being mapped through to the process via remap_pfn_range
instead of the more appropriate vm_insert_page, causing weird behaviors
during disassociation.
This series adds the missing VM_* flag manipulation, adds faulting a zero
page for disassociation and revises the CPU page mappings to use
vm_insert_page.
====================
For dependencies this branch is based on for-rc from
git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma.git
* branch 'rdma_mmap':
RDMA: Remove rdma_user_mmap_page
RDMA/mlx5: Use get_zeroed_page() for clock_info
RDMA/ucontext: Fix regression with disassociate
RDMA/mlx5: Use rdma_user_map_io for mapping BAR pages
RDMA/mlx5: Do not allow the user to write to the clock page
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Upon further research drivers that want this should simply call the core
function vm_insert_page(). The VMA holds a reference on the page and it
will be automatically freed when the last reference drops. No need for
disassociate to sequence the cleanup.
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Add a designated reviewer for the LED subsystem as there
are already two maintainers assigned.
Signed-off-by: Dan Murphy <dmurphy@ti.com>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
