This adds labels to commonly used device-tree nodes so that derivative
boards can avoid ahb/apb hierarchy.
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Ludovic Desroches <ludovic.desroches@microchip.com>
Add an example for the magic PRP0001 device ID which allows matching
ACPI devices against drivers using OF Device Tree compatible property.
Signed-off-by: Thomas Preston <thomas.preston@codethink.co.uk>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Commit 18996f2db9 ("ACPICA: Events: Stop unconditionally clearing
ACPI IRQs during suspend/resume") was added to stop clearing event
status bits unconditionally in the system-wide suspend and resume
paths. This was done because of an issue with a laptop lid appaering
to be closed even when it was used to wake up the system from suspend
(see https://bugzilla.kernel.org/show_bug.cgi?id=196249), which
happened because event status bits were cleared unconditionally on
system resume. Though this change fixed the issue in the resume path,
it introduced regressions in a few suspend paths.
First regression was reported and fixed in the S5 entry path by commit
fa85015c0d ("ACPICA: Clear status of all events when entering S5").
Next regression was reported and fixed for all legacy sleep paths by
commit f317c7dc12 ("ACPICA: Clear status of all events when entering
sleep states"). However, there still is a suspend-to-idle regression,
since suspend-to-idle does not follow the legacy sleep paths.
In the suspend-to-idle case, wakeup is enabled as part of device
suspend. If the status bits of wakeup GPEs are set when they are
enabled, it causes a premature system wakeup to occur.
To address that problem, partially revert commit 18996f2db9 to
restore GPE status bits clearing before the GPE is enabled in
acpi_ev_enable_gpe().
Fixes: 18996f2db9 ("ACPICA: Events: Stop unconditionally clearing ACPI IRQs during suspend/resume")
Signed-off-by: Furquan Shaikh <furquan@google.com>
Cc: 4.17+ <stable@vger.kernel.org> # 4.17+
[ rjw: Subject & changelog ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
uuid in add_switch is allocted via kmemdup which can fail. The patch
logs the error and cleans up the allocated memory for switch.
Signed-off-by: Aditya Pakki <pakki001@umn.edu>
Reviewed-by: Mukesh Ojha <mojha@codeaurora.org>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
No check is enforced for the return value of kzalloc,
which may lead to NULL-pointer dereference.
The patch fixes this issue.
Signed-off-by: Kangjie Lu <kjlu@umn.edu>
Reviewed-by: Mukesh Ojha <mojha@codeaurora.org>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Function __hw_perf_event_init() used a CPU variable without
ensuring CPU preemption has been disabled. This caused the
following warning in the kernel log:
[ 7.277085] BUG: using smp_processor_id() in preemptible
[00000000] code: cf-csdiag/1892
[ 7.277111] caller is cf_diag_event_init+0x13a/0x338
[ 7.277122] CPU: 10 PID: 1892 Comm: cf-csdiag Not tainted
5.0.0-20190318.rc0.git0.9e1a11e0f602.300.fc29.s390x+debug #1
[ 7.277131] Hardware name: IBM 2964 NC9 712 (LPAR)
[ 7.277139] Call Trace:
[ 7.277150] ([<000000000011385a>] show_stack+0x82/0xd0)
[ 7.277161] [<0000000000b7a71a>] dump_stack+0x92/0xd0
[ 7.277174] [<00000000007b7e9c>] check_preemption_disabled+0xe4/0x100
[ 7.277183] [<00000000001228aa>] cf_diag_event_init+0x13a/0x338
[ 7.277195] [<00000000002cf3aa>] perf_try_init_event+0x72/0xf0
[ 7.277204] [<00000000002d0bba>] perf_event_alloc+0x6fa/0xce0
[ 7.277214] [<00000000002dc4a8>] __s390x_sys_perf_event_open+0x398/0xd50
[ 7.277224] [<0000000000b9e8f0>] system_call+0xdc/0x2d8
[ 7.277233] 2 locks held by cf-csdiag/1892:
[ 7.277241] #0: 00000000976f5510 (&sig->cred_guard_mutex){+.+.},
at: __s390x_sys_perf_event_open+0xd2e/0xd50
[ 7.277257] #1: 00000000363b11bd (&pmus_srcu){....},
at: perf_event_alloc+0x52e/0xce0
The variable is now accessed in proper context. Use
get_cpu_var()/put_cpu_var() pair to disable
preemption during access.
As the hardware authorization settings apply to all CPUs, it
does not matter which CPU is used to check the authorization setting.
Remove the event->count assignment. It is not needed as function
perf_event_alloc() allocates memory for the event with kzalloc() and
thus count is already set to zero.
Fixes: fe5908bccc ("s390/cpum_cf_diag: Add support for s390 counter facility diagnostic trace")
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Lorenz Messtechnik has a device that is controlled by the cp210x driver,
so add the device id to the driver. The device id was provided by
Silicon-Labs for the devices from this vendor.
Reported-by: Uli <t9cpu@web.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Some i.MX6 devices (imx6D, imx6Q, imx6DL, imx6S, imx6DP and imx6DQ) have
an issue wherein AXI bus transactions may not occur in the correct order.
This isn't a problem running single descriptors, but can be if running
multiple concurrent descriptors. Reworking the CAAM driver to throttle
to single requests is impractical, so this patch limits the AXI pipeline
to a depth of one (from a default of 4) to preclude this situation from
occurring.
This patch applies to known affected platforms.
Signed-off-by: Radu Solea <radu.solea@nxp.com>
Signed-off-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Reviewed-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
In caam_jr_enqueue(), a write barrier is needed to order stores to job
ring slot before declaring addition of new job into input job ring.
The register write is done using wr_reg32() which internally uses
iowrite32() for write operation. The api iowrite32() issues a write
barrier before issuing write operation. Therefore, the wmb() preceding
wr_reg32() can be safely removed.
Signed-off-by: Vakul Garg <vakul.garg@nxp.com>
Reviewed-by: Horia Geanta <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
For each job ring, the variable 'ringsize' is initialised but never
used. Similarly variables 'inp_ring_write_index' and 'head' always track
the same value and instead of 'inp_ring_write_index', caam_jr_enqueue()
can use 'head' itself. Both these variables have been removed.
Signed-off-by: Vakul Garg <vakul.garg@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
For each job ring pair, the output ring is processed exactly by one cpu
at a time under a tasklet context (one per ring). Therefore, there is no
need to protect a job ring's access & its private data structure using a
lock. Hence the lock can be removed.
Signed-off-by: Vakul Garg <vakul.garg@nxp.com>
Reviewed-by: Horia Geanta <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Fix sparse warnings:
drivers/crypto/vmx/vmx.c:44:12: warning:
symbol 'p8_init' was not declared. Should it be static?
drivers/crypto/vmx/vmx.c:70:13: warning:
symbol 'p8_exit' was not declared. Should it be static?
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Fix sparse warning:
drivers/crypto/cavium/cpt/cptvf_main.c:644:6:
warning: symbol 'cptvf_device_init' was not declared. Should it be static?
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
It's never used since introduction in commit
9d12ba86f8 ("crypto: brcm - Add Broadcom SPU driver")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Fix following sparse warnings:
drivers/crypto/cavium/zip/zip_crypto.c:72:5: warning: symbol 'zip_ctx_init' was not declared. Should it be static?
drivers/crypto/cavium/zip/zip_crypto.c:110:6: warning: symbol 'zip_ctx_exit' was not declared. Should it be static?
drivers/crypto/cavium/zip/zip_crypto.c:122:5: warning: symbol 'zip_compress' was not declared. Should it be static?
drivers/crypto/cavium/zip/zip_crypto.c:158:5: warning: symbol 'zip_decompress' was not declared. Should it be static?
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Fix sparse warning:
drivers/crypto/ccp/ccp-crypto-rsa.c:251:5:
warning: symbol 'ccp_register_rsa_alg' was not declared. Should it be static?
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Acked-by: Gary R Hook <gary.hook@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Fix sparse warnings:
drivers/crypto/cavium/cpt/cptvf_reqmanager.c:226:5: warning: symbol 'send_cpt_command' was not declared. Should it be static?
drivers/crypto/cavium/cpt/cptvf_reqmanager.c:273:6: warning: symbol 'do_request_cleanup' was not declared. Should it be static?
drivers/crypto/cavium/cpt/cptvf_reqmanager.c:319:6: warning: symbol 'do_post_process' was not declared. Should it be static?
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
cptvf_mbox_send_ack and cptvf_mbox_send_nack are never
used since introdution in commit c694b23329 ("crypto: cavium
- Add the Virtual Function driver for CPT")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
VRF devices don't work with upper devices. Currently, it's possible to
add a VRF device to a bridge or team, and to create macvlan, macsec, or
ipvlan devices on top of a VRF (bond and vlan are prevented respectively
by the lack of an ndo_set_mac_address op and the NETIF_F_VLAN_CHALLENGED
feature flag).
Fix this by setting the IFF_NO_RX_HANDLER flag (introduced in commit
f5426250a6 ("net: introduce IFF_NO_RX_HANDLER")).
Cc: David Ahern <dsahern@gmail.com>
Fixes: 193125dbd8 ("net: Introduce VRF device driver")
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Acked-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fix a side effect of adding xcbc support, when the next_buffer is not
copied.
The issue occurs, when there is stored from previous state a blocksize
buffer and received, a less than blocksize, from user. In this case, the
nents for req->src is 0, and the next_buffer is not copied.
An example is:
{
.tap = { 17, 15, 8 },
.psize = 40,
.np = 3,
.ksize = 16,
}
Fixes: 12b8567f6f ("crypto: caam - add support for xcbc(aes)")
Signed-off-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Reviewed-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Dean Nelson says:
====================
thunderx: fix receive buffer page recycling
In attempting to optimize receive buffer page recycling for XDP, commit
773225388d ("net: thunderx: Optimize page recycling for XDP")
inadvertently introduced two problems for the non-XDP case, that will be
addressed by this patch series.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
For the non-XDP case, commit 773225388d ("net: thunderx: Optimize
page recycling for XDP") added code to nicvf_free_rbdr() that, when releasing
the additional receive buffer page reference held for recycling, repeatedly
calls put_page() until the page's _refcount goes to zero. Which results in
the page being freed.
This is not okay if the page's _refcount was greater than 1 (in the non-XDP
case), because nicvf_free_rbdr() should not be subtracting more than what
nicvf_alloc_page() had previously added to the page's _refcount, which was
only 1 (in the non-XDP case).
This can arise if a received packet is still being processed and the receive
buffer (i.e., skb->head) has not yet been freed via skb_free_head() when
nicvf_free_rbdr() is spinning through the aforementioned put_page() loop.
If this should occur, when the received packet finishes processing and
skb_free_head() is called, various problems can ensue. Exactly what, depends on
whether the page has already been reallocated or not, anything from "BUG: Bad
page state ... ", to "Unable to handle kernel NULL pointer dereference ..." or
"Unable to handle kernel paging request...".
So this patch changes nicvf_free_rbdr() to only call put_page() once for pages
held for recycling (in the non-XDP case).
Fixes: 773225388d ("net: thunderx: Optimize page recycling for XDP")
Signed-off-by: Dean Nelson <dnelson@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit 773225388d ("net: thunderx: Optimize page recycling for XDP")
added code to nicvf_alloc_page() that inadvertently disables receive buffer
page recycling for the non-XDP case by always NULL'ng the page pointer.
This patch corrects two if-conditionals to allow for the recycling of non-XDP
mode pages by only setting the page pointer to NULL when the page is not ready
for recycling.
Fixes: 773225388d ("net: thunderx: Optimize page recycling for XDP")
Signed-off-by: Dean Nelson <dnelson@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
With a recent link mode advertisement code update this helper
providing local pause capability translation used for flow
control link mode negotiation got broken.
For eth drivers using this helper, the issue is apparent only
if either PAUSE or ASYM_PAUSE is being advertised.
Fixes: 3c1bcc8614 ("net: ethernet: Convert phydev advertize and supported from u32 to link mode")
Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently, the rules for configuring search paths in Kbuild have
changed, this will lead some erros when compiling hns3 with the
following command:
make O=DIR M=drivers/net/ethernet/hisilicon/hns3
drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_cmd.c:11:10:
fatal error: hnae3.h: No such file or directory
This patch fix it by adding $(srctree)/ prefix to the serach paths.
Signed-off-by: Xi Wang <wangxi11@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
ila_xlat_nl_cmd_flush uses rhashtable walkers allocated from the
stack but it never frees them. This corrupts the walker list of
the hash table.
This patch fixes it.
Reported-by: syzbot+dae72a112334aa65a159@syzkaller.appspotmail.com
Fixes: b6e71bdebb ("ila: Flush netlink command to clear xlat...")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
MAINTAINERS still pointed to phy.txt after moving this file into the rst
format, fix this.
Reported-by: Joe Perches <joe@perches.com>
Fixes: 25fe02d00a ("Documentation: net: phy: switch documentation to rst format")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Christoph reported a stall while peeking datagram with an offset when
busy polling is enabled. __skb_try_recv_datagram() uses as the loop
termination condition 'queue empty'. When peeking, the socket
queue can be not empty, even when no additional packets are received.
Address the issue explicitly checking for receive queue changes,
as currently done by __skb_wait_for_more_packets().
Fixes: 2b5cd0dfa3 ("net: Change return type of sk_busy_loop from bool to void")
Reported-and-tested-by: Christoph Paasch <cpaasch@apple.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patches fixes few issues in mv88e6390x_port_set_cmode().
1. When entering the function the old cmode may be 0, in this case
mv88e6390x_serdes_get_lane() returns -ENODEV. As result we bail
out and have no chance to set a new mode. Therefore deal properly
with -ENODEV.
2. Once we have disabled power and irq, let's set the cached cmode to 0.
This reflects the actual status and is cleaner if we bail out with an
error in the following function calls.
3. The cached cmode is used by mv88e6390x_serdes_get_lane(),
mv88e6390_serdes_power_lane() and mv88e6390_serdes_irq_enable().
Currently we set the cached mode to the new one at the very end of
the function only, means until then we use the old one what may be
wrong.
4. When calling mv88e6390_serdes_irq_enable() we use the lane value
belonging to the old cmode. Get the lane belonging to the new cmode
before calling this function.
It's hard to provide a good "Fixes" tag because quite a few smaller
changes have been done to the code in question recently.
Fixes: d235c48b40 ("net: dsa: mv88e6xxx: power serdes on/off for 10G interfaces on 6390X")
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In order to fix dependencies with rpmpd DT entries, the header was
dropped and hardcoded values were added for opp-level, during the
previous merge window.
Add the header back in now and remove the hardcodings, effectively
reverting commit '08585d21de: arm64: dts:
sdm845: Fixup dependency on RPMPD includes'
Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Enable blsp1_uart3, define its pinconf and add the bluetooth node.
It seems provisioning is lacking a valid BD address, preventing the
interface from initializing, so provide a dummy for now.
Tested-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Add host controller and PHY DT nodes.
Tested-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Marc Gonzalez <marc.w.gonzalez@free.fr>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
The UFS host controller driver needs to set the load on 3 power rails
(l20, l26, s4) but the operation fails silently unless we specify the
regulator-allow-set-load property in the corresponding DT nodes.
Tested-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Jeffrey Hugo <jhugo@codeaurora.org>
Signed-off-by: Marc Gonzalez <marc.w.gonzalez@free.fr>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Add "qcom,msm8998-ufshc" compatible string.
Tested-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Marc Gonzalez <marc.w.gonzalez@free.fr>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
The property controlled-remotely should not be set by default
for qcs-404 device, it should be set based on the secure boot
options (TZ or ATF) preferred by the platform. Hence, the
controlled-remotely property is moved to platform specific
dts files.
Signed-off-by: Khasim Syed Mohammed <khasim.mohammed@linaro.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Include the device tree header for the on-chip interconnect endpoint
resources on sdm845 devices. This will allow using the "interconnects"
property in DT nodes to describe the interconnect path resources they use.
The sdm845 interconnect provider DT node is already present, but the
header file with the resources is not included, so let's fix this.
Reviewed-by: Evan Green <evgreen@chromium.org>
Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
The regulator definition got their supply names cleaned up during
upstreaming, so they no longer match the driver defined names. Update
the supply names.
Also fill out the missing voltage of SMPS 5.
Fixes: 0b363f5b87 ("arm64: dts: qcom: qcs404: Add PMS405 RPM regulators")
Reported-by: Nicolas Dechesne <nicolas.dechesne@linaro.org>
Reviewed-by: Niklas Cassel <niklas.cassel@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
PMS405 contains a variant of the spmi-adc-rev2 ADC. Create a new
compatible inorder to handle any differences.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
The memremap() function doesn't return error pointers, it returns NULL.
This code is returning "ret = PTR_ERR(NULL);" which is success, but it
should return -ENOMEM.
Fixes: 312416d917 ("drivers: qcom: add command DB driver")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Current QMI clients are not userspace facing, if their threads are
signaled, they do not do any signal checking or propagate the
ERESTARTSYS return code up. Remove the interruptible option so clients
can finish their QMI transactions even if the thread is signaled.
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Chris Lew <clew@codeaurora.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
This change adds mmap functionality to rmtfs_mem driver.
Userspace application can map the address and use this
mapped address directly as buffer for read/write call to disk.
and avoid the read/write call to the shared path to copy the
buffer to userspace application.
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Ankit Jain <jankit@codeaurora.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
