It is hard to say what KEY_SCREEN and KEY_ZOOM mean, but historically DVB
folks have used them to indicate switch to full screen mode. Later, they
converged on using KEY_ZOOM to switch into full screen mode and KEY)SCREEN
to control aspect ratio (see Documentation/media/uapi/rc/rc-tables.rst).
Let's commit to these uses, and define:
- KEY_FULL_SCREEN (and make KEY_ZOOM its alias)
- KEY_ASPECT_RATIO (and make KEY_SCREEN its alias)
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
There are many Lenovo laptops which need elan_i2c support, this patch adds
relevant IDs to the Elan driver so that touchpads are recognized.
Signed-off-by: KT Liao <kt.liao@emc.com.tw>
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Fix for name mismatch and omitted colons in the
security_list_options documentation.
Signed-off-by: Denis Efremov <efremov@ispras.ru>
Acked-by: Kees Cook <keescook@chromium.org>
Acked-by: Casey Schaufler <casey@schaufler-ca.com>
Signed-off-by: James Morris <james.morris@microsoft.com>
The shm_* hooks were changed in the commit
"shm/security: Pass kern_ipc_perm not shmid_kernel into the
shm security hooks" (7191adff2a). The type of the argument
shp was changed from shmid_kernel to kern_ipc_perm. This patch
updates the documentation for the hooks accordingly.
Signed-off-by: Denis Efremov <efremov@ispras.ru>
Acked-by: Kees Cook <keescook@chromium.org>
Acked-by: Casey Schaufler <casey@schaufler-ca.com>
Signed-off-by: James Morris <james.morris@microsoft.com>
The sem_* hooks were changed in the commit
"sem/security: Pass kern_ipc_perm not sem_array into the
sem security hooks" (aefad9593e). The type of the argument
sma was changed from sem_array to kern_ipc_perm. This patch
updates the documentation for the hooks accordingly.
Signed-off-by: Denis Efremov <efremov@ispras.ru>
Acked-by: Kees Cook <keescook@chromium.org>
Acked-by: Casey Schaufler <casey@schaufler-ca.com>
Signed-off-by: James Morris <james.morris@microsoft.com>
The msg_queue_* hooks were changed in the commit
"msg/security: Pass kern_ipc_perm not msg_queue into the msg_queue
security hooks" (d8c6e85432). The type of the argument msq was changed
from msq_queue to kern_ipc_perm. This patch updates the documentation
for the hooks accordingly.
Signed-off-by: Denis Efremov <efremov@ispras.ru>
Acked-by: Kees Cook <keescook@chromium.org>
Acked-by: Casey Schaufler <casey@schaufler-ca.com>
Signed-off-by: James Morris <james.morris@microsoft.com>
This patch updates the documentation for the audit_* hooks
to use the same arguments names as in the hook's declarations.
Signed-off-by: Denis Efremov <efremov@ispras.ru>
Acked-by: Kees Cook <keescook@chromium.org>
Acked-by: Casey Schaufler <casey@schaufler-ca.com>
Signed-off-by: James Morris <james.morris@microsoft.com>
The path_chmod hook was changed in the commit
"switch security_path_chmod() to struct path *" (cdcf116d44).
The argument @mnt was removed from the hook, @dentry was changed
to @path. This patch updates the documentation accordingly.
Signed-off-by: Denis Efremov <efremov@ispras.ru>
Acked-by: Kees Cook <keescook@chromium.org>
Acked-by: Casey Schaufler <casey@schaufler-ca.com>
Signed-off-by: James Morris <james.morris@microsoft.com>
The socket_getpeersec_dgram hook was changed in the commit
"[AF_UNIX]: Kernel memory leak fix for af_unix datagram
getpeersec patch" (dc49c1f94e). The arguments @secdata
and @seclen were changed to @sock and @secid. This patch
updates the documentation accordingly.
Signed-off-by: Denis Efremov <efremov@ispras.ru>
Acked-by: Kees Cook <keescook@chromium.org>
Acked-by: Casey Schaufler <casey@schaufler-ca.com>
Signed-off-by: James Morris <james.morris@microsoft.com>
The task_setscheduler hook was changed in the commit
"security: remove unused parameter from security_task_setscheduler()"
(b0ae198113). The arguments @policy, @lp were removed from the hook.
This patch updates the documentation accordingly.
Signed-off-by: Denis Efremov <efremov@ispras.ru>
Acked-by: Kees Cook <keescook@chromium.org>
Acked-by: Casey Schaufler <casey@schaufler-ca.com>
Signed-off-by: James Morris <james.morris@microsoft.com>
This patch slightly fixes the documentation for the
socket_post_create hook. The documentation states that
i_security field is accessible through inode field of socket
structure (i.e., 'sock->inode->i_security'). There is no inode
field in the socket structure. The i_security field is accessible
through SOCK_INODE macro. The patch updates the documentation
to reflect this.
Signed-off-by: Denis Efremov <efremov@ispras.ru>
Acked-by: Kees Cook <keescook@chromium.org>
Acked-by: Casey Schaufler <casey@schaufler-ca.com>
Signed-off-by: James Morris <james.morris@microsoft.com>
The syslog hook was changed in the commit
"capabilities/syslog: open code cap_syslog logic to
fix build failure" (12b3052c3e). The argument @from_file
was removed from the hook. This patch updates the
documentation for the syslog hook accordingly.
Signed-off-by: Denis Efremov <efremov@ispras.ru>
Acked-by: Kees Cook <keescook@chromium.org>
Acked-by: Casey Schaufler <casey@schaufler-ca.com>
Signed-off-by: James Morris <james.morris@microsoft.com>
The @type argument of the sb_copy_data hook was removed
in the commit "LSM/SELinux: Interfaces to allow FS to control
mount options" (e000752989). This commit removes the description
of the @type argument from the LSM documentation.
Signed-off-by: Denis Efremov <efremov@ispras.ru>
Acked-by: Kees Cook <keescook@chromium.org>
Acked-by: Casey Schaufler <casey@schaufler-ca.com>
Signed-off-by: James Morris <james.morris@microsoft.com>
In cpu_to_drc_index() in the case when FW_FEATURE_DRC_INFO is absent,
we currently use of_read_property() to obtain the pointer to the array
corresponding to the property "ibm,drc-indexes". The elements of this
array are of type __be32, but are accessed without any conversion to
the OS-endianness, which is buggy on a Little Endian OS.
Fix this by using of_property_read_u32_index() accessor function to
safely read the elements of the array.
Fixes: e83636ac33 ("pseries/drc-info: Search DRC properties for CPU indexes")
Cc: stable@vger.kernel.org # v4.16+
Reported-by: Pavithra R. Prakash <pavrampu@in.ibm.com>
Signed-off-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com>
Reviewed-by: Vaidyanathan Srinivasan <svaidy@linux.vnet.ibm.com>
[mpe: Make the WARN_ON a WARN_ON_ONCE so it's not retriggerable]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAlyX8GkeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGioAH+wXBYE2zMALvgBfT
XksjTlPzbdK7X9Avh+iF4WmFgElFeexjQ233QMGAKIUR6vahrLtQaWyDwl7VicjV
Ek64u5pV8E2lQj1Ma25ycKR1BGpZraMB1fUA71mzJa2SgWzE8T/LKxgdSlxIxl/I
GZOUsCu6xD8H8U982UFQAKb/1AmbXwB3y01XPIvr539FMAguKUS8Z0/Z5n1UTH1Y
LN6vCwaN9BJ+Sre5uMgmLO9oKp4Xlp5OEc4DjlBzSASFKwdG0+kKxgJIYy9+3Yya
qsc6ZlfDDmzmp7SjGHnFNcWfXNcRvazHg4m8VJwW3Db6ysi9ODmOcJ86x6VmIR+X
qXZqwlQ=
=M0m+
-----END PGP SIGNATURE-----
Merge tag 'v5.1-rc2' into next-general
Merge to Linux 5.1-rc2 for subsystems to work with.
The current check for WoL on i40e is broken. Code comment says only
magic packet is supported, so only check for that.
Fixes: 540a152da7 (i40e/ixgbe/igb: fail on new WoL flag setting WAKE_MAGICSECURE)
Signed-off-by: Stefan Assmann <sassmann@kpanic.de>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
The ixgbe ignores errors returned from mdiobus_register() and leaves
adapter->mii_bus non-NULL and MDIO bus state as MDIOBUS_ALLOCATED.
This triggers a BUG from mdiobus_unregister() during ixgbe_remove() call.
Fixes: 8fa10ef012 ("ixgbe: register a mdiobus")
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
AMD systems may support chip select interleaving. However, on family
17h+ this was not taken into account when printing the chip select
sizes.
Add support to detect if chip selects are interleaved on family 17h+,
and adjust the sizes accordingly.
Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Tested-by: Kim Phillips <kim.phillips@amd.com>
Cc: James Morse <james.morse@arm.com>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: linux-edac <linux-edac@vger.kernel.org>
Link: https://lkml.kernel.org/r/20190228153558.127292-6-Yazen.Ghannam@amd.com
The struct chip_select array that's used for saving chip select bases
and masks is fixed at length of two. There should be one struct
chip_select for each controller, so this array should be increased to
support systems that may have more than two controllers.
Increase the size of the struct chip_select array to eight, which is the
largest number of controllers per die currently supported on AMD
systems.
Also, carve out the Family 17h+ reading of the bases/masks into a
separate function. This effectively reverts the original bases/masks
reading code to before Family 17h support was added.
Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Tested-by: Kim Phillips <kim.phillips@amd.com>
Cc: James Morse <james.morse@arm.com>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: linux-edac <linux-edac@vger.kernel.org>
Link: https://lkml.kernel.org/r/20190228153558.127292-5-Yazen.Ghannam@amd.com
Future AMD systems may support x16 symbol sizes.
Recognize if a system is using x16 symbol size. Also, simplify the print
statement.
Note that a x16 syndrome vector table is not necessary like with x4 or
x8 syndromes. This is because systems that support x16 symbol sizes are
SMCA systems and in that case, the syndrome can be directly extracted
from the MCA_SYND[Syndrome] field.
[ bp: massage. ]
Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Tested-by: Kim Phillips <kim.phillips@amd.com>
Cc: James Morse <james.morse@arm.com>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: linux-edac <linux-edac@vger.kernel.org>
Link: https://lkml.kernel.org/r/20190228153558.127292-4-Yazen.Ghannam@amd.com
The AMD64 EDAC module currently hardcodes the EDAC channel layer size
count to two. Future AMD systems may have more channels than this.
Set the EDAC channel layer size equal to the maximum number of channels
possible for the system. On Family 17h and later, this is set in the
num_umcs variable. Older systems will continue to use two as the
default.
Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: James Morse <james.morse@arm.com>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: linux-edac <linux-edac@vger.kernel.org>
Link: https://lkml.kernel.org/r/20190325203319.7603-1-Yazen.Ghannam@amd.com
The first few models of Family 17h all had 2 Unified Memory Controllers
per Die, so this was treated as a fixed value. However, future systems
may have more Unified Memory Controllers per Die.
Related to this, the channel number and base address of a Unified Memory
Controller were found by matching on fixed, known values. However,
current and future systems follow this pattern for the channel number
and base address of a Unified Memory Controller: 0xYXXXXX, where Y is
the channel number. So matching on hardcoded values is not necessary.
Set the number of Unified Memory Controllers at driver init time based
on the family/model. Also, update the functions that find the channel
number and base address of a Unified Memory Controller to support more
than two.
[ bp: Move num_umcs into the .c file and simplify comment. ]
Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Tested-by: Kim Phillips <kim.phillips@amd.com>
Cc: James Morse <james.morse@arm.com>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: linux-edac <linux-edac@vger.kernel.org>
Link: https://lkml.kernel.org/r/20190228153558.127292-3-Yazen.Ghannam@amd.com
Define and use a macro for looping over the number of Unified Memory
Controllers.
No functional change.
Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Tested-by: Kim Phillips <kim.phillips@amd.com>
Cc: James Morse <james.morse@arm.com>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: linux-edac <linux-edac@vger.kernel.org>
Link: https://lkml.kernel.org/r/20190228153558.127292-2-Yazen.Ghannam@amd.com
Add the new Family 17h Model 30h PCI IDs to the AMD64 EDAC module.
This also fixes a probe failure that appeared when some other PCI IDs
for Family 17h Model 30h were added to the AMD NB code.
Fixes: be3518a16e (x86/amd_nb: Add PCI device IDs for family 17h, model 30h)
Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Tested-by: Kim Phillips <kim.phillips@amd.com>
Cc: James Morse <james.morse@arm.com>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: linux-edac <linux-edac@vger.kernel.org>
Link: https://lkml.kernel.org/r/20190228153558.127292-1-Yazen.Ghannam@amd.com
The runtime_suspend device callbacks are not supposed to save
configuration state or change the power state. Commit fb29f76cc5
("igb: Fix an issue that PME is not enabled during runtime suspend")
changed the driver to not save configuration state during runtime
suspend, however the driver callback still put the device into a
low-power state. This causes a warning in the pci pm core and results in
pci_pm_runtime_suspend not calling pci_save_state or pci_finish_runtime_suspend.
Fix this by not changing the power state either, leaving that to pci pm
core, and make the same change for suspend callback as well.
Also move a couple of defines into the appropriate header file instead
of inline in the .c file.
Fixes: fb29f76cc5 ("igb: Fix an issue that PME is not enabled during runtime suspend")
Signed-off-by: Arvind Sankar <niveditas98@gmail.com>
Reviewed-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Some enums in ice_tx_desc_cmd_bits have a trailing /* 2 BITS */ comment,
but the value has just one bit set (ex. ICE_TX_DESC_CMD_L4T_EOFT_SCTP
has the value 0x200 (i.e. only bit 9 is set). This is confusing and
misleading. So remove the comment.
Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Since the driver now hard codes the ITR granularity to 2 us in the
GLINT_CTL register the comment next to ITR_GRAN_S needs to be updated.
Signed-off-by: Brett Creeley <brett.creeley@intel.com>
Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Remove some redundant text in the function header for __ice_vsi_get_qs
Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Commit 0ac30ce433 ("i40e: fix up 32 bit timespec references",
2017-07-26) claims to be cleaning up references to 32-bit timespecs.
The actual contents of the commit make no sense, as it converts a call
to timespec64_add into timespec64_add_ns. This would seem ok, if (a) the
change was documented in the commit message, and (b) timespec64_add_ns
supported negative numbers.
timespec64_add_ns doesn't work with signed deltas, because the
implementation is based around iter_div_u64_rem. This change resulted in
a regression where i40e_ptp_adjtime would interpret small negative
adjustments as large positive additions, resulting in incorrect
behavior.
This commit doesn't appear to fix anything, is not well explained, and
introduces a bug, so lets just revert it.
Reverts: 0ac30ce433 ("i40e: fix up 32 bit timespec references", 2017-07-26)
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Single statement if conditions don't need braces. Remove it.
Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Commit 37bb839012 ("ice: Move common functions out of ice_main.c part
7/7") seems to have inadvertently introduced a function prototype for
ice_vsi_cfg_tc without a corresponding function implementation. Remove it.
Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Currently we aren't checking for the ICE_FC_NONE case for the current
flow control mode. This is causing "Unknown" to be printed for the
current flow control method if flow control is disabled. Fix this by
adding the case for ICE_FC_NONE to print "None".
Signed-off-by: Brett Creeley <brett.creeley@intel.com>
Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Currently the ice_q_vector structure and ice_ring_container structure
are taking up more space than necessary due to cache alignment holes
and unnecessary variables respectively. This is not helping the
driver's performance. The following fixes were done to improve cache
alignment, reduce wasted space, and increase performance.
1. Remove the ice_latency_range enum as it is unused.
2. Remove the latency_range variable in the ice_ring_container structure.
3. Change the size of the itr_idx in the ice_ring_container structure
from an int to an u16. This reduced the size of ice_ring_container
structure to 32 Bytes so it has no holes or padding.
4. Re-arrange the ice_q_vector structure using pahole to align
members as best as possible in regards to 64 Byte cache line size.
Signed-off-by: Brett Creeley <brett.creeley@intel.com>
Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
If filter already exists, do not go through error path flow but instead
continue to process rest of the function. Hence have an appropriate check
after adding MAC filters.
Signed-off-by: Preethi Banala <preethi.banala@intel.com>
Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
This patch fixes issue that occurs when VF is attempting to remove
default LAN/MAC address, which is programmed by the administrator.
We shouldn't return error for the call by the VF, but continue with
the remaining steps to handle MAC opcode. Also update the dev_err
message to explicitly say that VF can't change MAC programmed by PF.
Also change "mac" to "MAC" for kernel print statements in the same file.
Signed-off-by: Akeem G Abodunrin <akeem.g.abodunrin@intel.com>
Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
The scripting must supply the CONFIG_INITRAMFS_SOURCE Kconfig option
so that kbuild can find the desired initrd, but the configcheck.sh
script gets confused by this option because it takes a string instead
of the expected y/n/m. This causes checkconfig.sh to complain about
CONFIG_INITRAMFS_SOURCE in the torture-test output (though not in the
summary). As more people use rcutorture, the resulting confusion is
an increasing concern.
This commit therefore suppresses this false-positive warning by filtering
CONFIG_INITRAMFS_SOURCE from within the checkconfig.sh script.
Reported-by: Joel Fernandes <joel@joelfernandes.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
Currently, lock_torture_cleanup() uses the values of cxt.lwsa and cxt.lrsa
to detect bad parameters that prevented locktorture from initializing,
let alone running. In this case, lock_torture_cleanup() does no cleanup
aside from invoking torture_cleanup_begin() and torture_cleanup_end(),
as required to permit future torture tests to run. However, this
heuristic fails if the run with bad parameters was preceded by a previous
run that actually ran: In this case, both cxt.lwsa and cxt.lrsa will
remain non-zero, which means that the current lock_torture_cleanup()
invocation will be unable to detect the fact that it should skip cleanup,
which can result in charming outcomes such as double frees.
This commit therefore NULLs out both cxt.lwsa and cxt.lrsa at the end
of any run that actually ran.
Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Josh Triplett <josh@joshtriplett.org>
If the specified rcuperf.perf_type is not in the rcu_perf_init()
function's perf_ops[] array, rcuperf prints some console messages and
then invokes rcu_perf_cleanup() to set state so that a future torture
test can run. However, rcu_perf_cleanup() also attempts to end the
test that didn't actually start, and in doing so relies on the value
of cur_ops, a value that is not particularly relevant in this case.
This can result in confusing output or even follow-on failures due to
attempts to use facilities that have not been properly initialized.
This commit therefore sets the value of cur_ops to NULL in this case and
inserts a check near the beginning of rcu_perf_cleanup(), thus avoiding
relying on an irrelevant cur_ops value.
Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
If the specified rcutorture.torture_type is not in the rcu_torture_init()
function's torture_ops[] array, rcutorture prints some console messages
and then invokes rcu_torture_cleanup() to set state so that a future
torture test can run. However, rcu_torture_cleanup() also attempts to
end the test that didn't actually start, and in doing so relies on the
value of cur_ops, a value that is not particularly relevant in this case.
This can result in confusing output or even follow-on failures due to
attempts to use facilities that have not been properly initialized.
This commit therefore sets the value of cur_ops to NULL in this case
and inserts a check near the beginning of rcu_torture_cleanup(),
thus avoiding relying on an irrelevant cur_ops value.
Reported-by: kernel test robot <rong.a.chen@intel.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
The rcutorture_oom_notify() function has a misplaced close parenthesis
that results in increasingly long delays in rcu_fwd_progress_check()'s
checking for various RCU forward-progress problems. This commit therefore
puts the parenthesis in the right place.
Signed-off-by: Neeraj Upadhyay <neeraju@codeaurora.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
Back when there was a separate RCU-bh flavor, the ->ext_irq_conflict
field was used to prevent executing local_bh_enable() while interrupts
were disabled. However, there is no longer an RCU-bh flavor, so this
commit removes the no-longer-needed ->ext_irq_conflict field.
Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
The code actually rarely uses more than one type of RCU read-side
protection, as is actually desired given that we need some reasonable
probability of preempting RCU read-side critical sections, which cannot
happen with multiple types of protection. This comment therefore adjusts
the comment.
Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
Replace the license boiler plate with a SPDX license identifier.
While in the area, update an email address and add copyright notices.
Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
If there is only one online CPU, it doesn't make sense to try to offline
it, as any such attempt is guaranteed to fail. This commit therefore
check for this condition and refuses to attempt the nonsensical.
Reported-by: Su Yue <suy.fnst@cn.fujitsu.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
Tested-By: Su Yue <suy.fnst@cn.fujitsu.com>
The Documentation/RCU/stallwarn.txt file says that stall warnings
print "D" if dyntick-idle processing is enabled, but the code in
print_cpu_stall_fast_no_hz() prints "." instead. This commit therefore
reverses the sense of the test to make the code match the documentation.
Signed-off-by: Neeraj Upadhyay <neeraju@codeaurora.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
This commit further consolidates stall-warning functionality by moving
forward-progress checkers into kernel/rcu/tree_stall.h, updating a
comment or two while in the area. More specifically, this commit moves
show_rcu_gp_kthreads(), rcu_check_gp_start_stall(), rcu_fwd_progress_check(),
sysrq_rcu, sysrq_show_rcu(), sysrq_rcudump_op, and rcu_sysrq_init() from
kernel/rcu/tree.c to kernel/rcu/tree_stall.h.
Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
The rcu_iw_handler() function's sole purpose in life is to indicate
whether a stalled CPU had interrupts disabled, so it belongs in
kernel/rcu/tree_stall.h. This commit therefore makes that move,
clarifying its header comment while in the area.
Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
This commit does only code movement, removal of now-unneeded forward
declarations, and addition of comments. It organizes the functions
that implement RCU CPU stall warnings for normal grace periods into
three categories:
1. Control of RCU CPU stall warnings, including computing timeouts.
2. Interaction of stall warnings with grace periods.
3. Actual printing of the RCU CPU stall-warning messages.
Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
This commit further consolidates the stall-warning code by moving
print_cpu_stall_info() and its helper functions along with
zero_cpu_stall_ticks() to kernel/rcu/tree_stall.h.
Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
