The "header->number" comes from the ioctl and it needs to be clamped to
prevent out of bounds writes.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/20200501094011.GA960082@mwanda
Signed-off-by: Takashi Iwai <tiwai@suse.de>
In the unlikely event that a 32bit vcpu traps into the hypervisor
on an instruction that is located right at the end of the 32bit
range, the emulation of that instruction is going to increment
PC past the 32bit range. This isn't great, as userspace can then
observe this value and get a bit confused.
Conversly, userspace can do things like (in the context of a 64bit
guest that is capable of 32bit EL0) setting PSTATE to AArch64-EL0,
set PC to a 64bit value, change PSTATE to AArch32-USR, and observe
that PC hasn't been truncated. More confusion.
Fix both by:
- truncating PC increments for 32bit guests
- sanitizing all 32bit regs every time a core reg is changed by
userspace, and that PSTATE indicates a 32bit mode.
Cc: stable@vger.kernel.org
Acked-by: Will Deacon <will@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Cover with a proper ifdef around the variable declaration for fixing
the following compilation warning without CONFIG_LEDS_TRIGGER_AUDIO:
sound/pci/hda/patch_realtek.c: In function 'alc_fixup_hp_gpio_led':
sound/pci/hda/patch_realtek.c:4134:6: warning: unused variable 'err' [-Wunused-variable]
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Fixes: 87dc36482c ("ALSA: hda/realtek - Add LED class support for micmute LED")
Link: https://lore.kernel.org/r/20200501072857.13720-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
efi_parse_options can fail if it is unable to allocate space for a copy
of the command line. Check the return value to make sure it succeeded.
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Link: https://lore.kernel.org/r/20200430182843.2510180-12-nivedita@alum.mit.edu
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Factor out the initrd loading into a common function that can be called
both from the generic efi-stub.c and the x86-specific x86-stub.c.
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Link: https://lore.kernel.org/r/20200430182843.2510180-10-nivedita@alum.mit.edu
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Rename pr_efi to efi_info and pr_efi_err to efi_err to make it more
obvious that they are part of the EFI stub and not generic printk infra.
Suggested-by: Joe Perches <joe@perches.com>
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Link: https://lore.kernel.org/r/20200430182843.2510180-4-nivedita@alum.mit.edu
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
In several places 64-bit values need to be split up into two 32-bit
fields, in order to be backward-compatible with the old 32-bit ABIs.
Instead of open-coding this, add a helper function to set a 64-bit value
as two 32-bit fields.
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Link: https://lore.kernel.org/r/20200430182843.2510180-3-nivedita@alum.mit.edu
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
struct boot_params is only 4096 bytes, not 16384. Fix this by using
sizeof(struct boot_params) instead of hardcoding the incorrect value.
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Link: https://lore.kernel.org/r/20200430182843.2510180-2-nivedita@alum.mit.edu
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
While working on to make io_uring sqpoll mode support syscalls that need
struct files_struct, I got cpu soft lockup in io_ring_ctx_wait_and_kill(),
while (ctx->sqo_thread && !wq_has_sleeper(&ctx->sqo_wait))
cpu_relax();
above loop never has an chance to exit, it's because preempt isn't enabled
in the kernel, and the context calling io_ring_ctx_wait_and_kill() and
io_sq_thread() run in the same cpu, if io_sq_thread calls a cond_resched()
yield cpu and another context enters above loop, then io_sq_thread() will
always in runqueue and never exit.
Use cond_resched() can fix this issue.
Reported-by: syzbot+66243bb7126c410cefe6@syzkaller.appspotmail.com
Signed-off-by: Xiaoguang Wang <xiaoguang.wang@linux.alibaba.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Use ctx->fallback_req address for test_and_set_bit_lock() and
clear_bit_unlock().
Signed-off-by: Bijan Mottahedeh <bijan.mottahedeh@oracle.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We do blocking retry from our poll handler, if the file supports polled
notifications. Only mark the request as needing an async worker if we
can't poll for it.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We can have files like eventfd where it's perfectly fine to do poll
based retry on them, right now io_file_supports_async() doesn't take
that into account.
Pass in data direction and check the f_op instead of just always needing
an async worker.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Under heavy load, the EOTID termination FLOWC request fails to get
enqueued to the end of the Tx ring due to lack of credits. This
results in EOTID leak.
When disabling TC-MQPRIO offload, the link is already brought down
to cleanup EOTIDs. So, flush any pending enqueued skbs that can't be
sent outside the wire, to make room for FLOWC request. Also, move the
FLOWC descriptor consumption logic closer to when the FLOWC request is
actually posted to hardware.
Fixes: 0e395b3cb1 ("cxgb4: add FLOWC based QoS offload")
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Unfortunately sometimes ->probe() may fail. The commit b9663b7ca6
("net: stmmac: Enable SERDES power up/down sequence")
messed up with error handling and thus:
[ 12.811311] ------------[ cut here ]------------
[ 12.811993] kernel BUG at net/core/dev.c:9937!
Fix this by properly crafted error path.
Fixes: b9663b7ca6 ("net: stmmac: Enable SERDES power up/down sequence")
Cc: Voon Weifeng <weifeng.voon@intel.com>
Cc: Ong Boon Leong <boon.leong.ong@intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fixes coccicheck warnings:
drivers/net/ethernet/huawei/hinic/hinic_hw_mbox.c:452:17-24: WARNING opportunity for kmemdup
drivers/net/ethernet/huawei/hinic/hinic_hw_mbox.c:458:23-30: WARNING opportunity for kmemdup
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zou Wei <zou_wei@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fix sparse warnings:
drivers/net/ethernet/huawei/hinic/hinic_hw_mbox.c:601:6: warning: symbol 'dump_mox_reg' was not declared. Should it be static?
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zheng Bin <zhengbin13@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This PHY has two PHY IDs depending on its mode. Adjust the mask so that
it includes both IDs.
Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The lower three bits of the phy_id specifies the chip stepping. The
workaround is specifically for the B0 stepping. Apply it only on these
chips.
Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Broadcom defines the bits for this PHY as follows:
{ oui[24:3], model[6:0], revision[2:0] }
Thus we have to mask the lower three bits only.
Fixes: 6937602ed3 ("net: phy: add Broadcom BCM54140 support")
Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Set the .soft_reset() op to be sure there will be a reset even if there
is no hardware reset line registered.
Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The AR8031 and AR8035 support the link speed downshift. Add driver
support for it. One peculiarity of these PHYs is that it needs a
software reset after changing the setting, thus add the .soft_reset()
op and do a phy_init_hw() if necessary.
This was tested on a custom board with the AR8031.
Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
RTL8125 supports the same PME_SIGNAL handling as all later RTL8168
chip variants.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Sync definition of max jumbo packet size with vendor driver and reserve
22 bytes for VLAN ethernet header plus checksum.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The vendor driver does upon failing to read a valid MAC address from
EEPROM write the netdev's address back to EEPROM and invoking a EEPROM
reload operation. Based on this we can implement the ethtool_ops
set_eeprom and provide the means to populate the EEPROM from within
Linux.
It's worth noting that ax88179_get_eeprom() will return some default
data unless the content of the EEPROM is deemed "complete", so until the
EEPROM is fully populated (e.g. by running ethtool -e | ethtool -E)
data written with ax88179_set_eeprom() will appear not to stick.
The implementation is based on asix_set_eeprom(), from asix_common.c
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vregion helpers to get min and max priority depend on the correct
ordering of vchunks in the vregion list. However, the current code
always adds new chunk to the end of the list, no matter what the
priority is. Fix this by finding the correct place in the list and put
vchunk there.
Fixes: 22a677661f ("mlxsw: spectrum: Introduce ACL core with simple TCAM implementation")
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fix to return negative error code -ENOMEM from the error handling
case instead of 0, as done elsewhere in this function.
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In case of error, the function devm_ioremap() returns NULL pointer
not ERR_PTR(). The IS_ERR() test in the return value check should
be replaced with NULL test.
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Acked-by: Esben Haabendal <esben@geanix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
RFC 6040 recommends propagating an ECT(1) mark from an outer tunnel header
to the inner header if that inner header is already marked as ECT(0). When
RFC 6040 decapsulation was implemented, this case of propagation was not
added. This simply appears to be an oversight, so let's fix that.
Fixes: eccc1bb8d4 ("tunnel: drop packet if ECN present with not-ECT")
Reported-by: Bob Briscoe <ietf@bobbriscoe.net>
Reported-by: Olivier Tilmans <olivier.tilmans@nokia-bell-labs.com>
Cc: Dave Taht <dave.taht@gmail.com>
Cc: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This reverts commit 29ae6bd1b0.
The commit breaks ethernet function on i.MX6SX, i.MX7D, i.MX8MM,
i.MX8MQ, and i.MX8QXP platforms. Boot yocto system by NFS mounting
rootfs will be failed with the commit.
Signed-off-by: Fugang Duan <fugang.duan@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fix to return a negative error code from the error handling
case instead of 0, as done elsewhere in this function.
Fixes: b7370112f5 ("lpc32xx: Added ethernet driver")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Acked-by: Vladimir Zapolskiy <vz@mleia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
security_fs_context_parse_param is called by vfs_parse_fs_param and
a succussful return value (i.e 0) implies that a parameter will be
consumed by the LSM framework. This stops all further parsing of the
parmeter by VFS. Furthermore, if an LSM hook returns a success, the
remaining LSM hooks are not invoked for the parameter.
The current default behavior of returning success means that all the
parameters are expected to be parsed by the LSM hook and none of them
end up being populated by vfs in fs_context
This was noticed when lsm=bpf is supplied on the command line before any
other LSM. As the bpf lsm uses this default value to implement a default
hook, this resulted in a failure to parse any fs_context parameters and
a failure to mount the root filesystem.
Fixes: 98e828a065 ("security: Refactor declaration of LSM hooks")
Reported-by: Mikko Ylinen <mikko.ylinen@linux.intel.com>
Signed-off-by: KP Singh <kpsingh@google.com>
Signed-off-by: James Morris <jmorris@namei.org>
Fix to return a error code from the error handling case
instead of 0, as done elsewhere in this function.
Fixes: 31ad4e4ee1 ("ice: Allocate flow profile")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fix to return negative error code -ENOMEM from the error handling
case instead of 0, as done elsewhere in this function.
Fixes: 5a6d7c9dae ("octeontx2-pf: Mailbox communication with AF")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The commit e6a41c23df, while trying to fix an issue,
("net: macb: ensure interface is not suspended on at91rm9200")
introduced a refcounting regression, because in error case refcounter
must be balanced. Fix it by calling pm_runtime_put_noidle() in error case.
While here, fix the same mistake in other couple of places.
Fixes: e6a41c23df ("net: macb: ensure interface is not suspended on at91rm9200")
Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
Cc: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fixes coccicheck warning:
./drivers/net/ethernet/freescale/dpaa/dpaa_eth.c:2110:30-31:
WARNING comparing pointer to 0
Avoid pointer type value compared to 0.
Signed-off-by: Aishwarya Ramakrishnan <aishwaryarj100@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Output PPS signal on FIPER2 (Fixed Period Interval Pulse) in default
which is more desired by user.
Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Should an irq requested with 'devm_request_irq' be released explicitly,
it should be done by 'devm_free_irq()', not 'free_irq()'.
Fixes: 6c821bd9ed ("net: Add MOXA ART SoCs ethernet driver")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
MACsec decryption always occurs in a softirq context. Since
the FPU may not be usable in the softirq context, the call to
decrypt may be scheduled on the cryptd work queue. The cryptd
work queue does not provide ordering guarantees. Therefore,
preserving order requires masking out ASYNC implementations
of gcm(aes).
For instance, an Intel CPU with AES-NI makes available the
generic-gcm-aesni driver from the aesni_intel module to
implement gcm(aes). However, this implementation requires
the FPU, so it is not always available to use from a softirq
context, and will fallback to the cryptd work queue, which
does not preserve frame ordering. With this change, such a
system would select gcm_base(ctr(aes-aesni),ghash-generic).
While the aes-aesni implementation prefers to use the FPU, it
will fallback to the aes-asm implementation if unavailable.
By using a synchronous version of gcm(aes), the decryption
will complete before returning from crypto_aead_decrypt().
Therefore, the macsec_decrypt_done() callback will be called
before returning from macsec_decrypt(). Thus, the order of
calls to macsec_post_decrypt() for the frames is preserved.
While it's presumable that the pure AES-NI version of gcm(aes)
is more performant, the hybrid solution is capable of gigabit
speeds on modest hardware. Regardless, preserving the order
of frames is paramount for many network protocols (e.g.,
triggering TCP retries). Within the MACsec driver itself, the
replay protection is tripped by the out-of-order frames, and
can cause frames to be dropped.
This bug has been present in this code since it was added in
v4.6, however it may not have been noticed since not all CPUs
have FPU offload available. Additionally, the bug manifests
as occasional out-of-order packets that are easily
misattributed to other network phenomena.
When this code was added in v4.6, the crypto/gcm.c code did
not restrict selection of the ghash function based on the
ASYNC flag. For instance, x86 CPUs with PCLMULQDQ would
select the ghash-clmulni driver instead of ghash-generic,
which submits to the cryptd work queue if the FPU is busy.
However, this bug was was corrected in v4.8 by commit
b30bdfa864, and was backported
all the way back to the v3.14 stable branch, so this patch
should be applicable back to the v4.6 stable branch.
Signed-off-by: Scott Dial <scott@scottdial.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When i915_gem_execbuffer2_ioctl() is using user_access_begin(),
that's only to perform unsafe_put_user() so use
user_write_access_begin() in order to only open write access.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/ebf1250b6d4f351469fb339e5399d8b92aa8a1c1.1585898438.git.christophe.leroy@c-s.fr
