Remove the ifdeffery in the breakpoint parsing arch_build_bp_info() by
adding a within_kprobe_blacklist() stub for the !CONFIG_KPROBES case.
It is returning true when kprobes are not enabled to mean that any
address is within the kprobes blacklist on such kernels and thus not
allow kernel breakpoints on non-kprobes kernels.
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Frederic Weisbecker <frederic@kernel.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "Naveen N. Rao" <naveen.n.rao@linux.ibm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20190127131237.4557-1-bp@alien8.de
It turns out that some designs went for implementing only combined
interrupt for rx, tx and overrun, which is currently not supported
by the driver. Support of combined irq is built on top of existent
irq handlers and activated automatically if only single irq was
specified in device tree.
Signed-off-by: Vladimir Murzin <vladimir.murzin@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Some designs, like MPS3, expose number of virtual serial ports which
already close or exceeds MPS2_MAX_PORTS. Increasing MPS2_MAX_PORTS
would have negative impact (in terms of memory consumption) on tiny
MPS2 platform which, in fact, has only one physically populated UART.
Start with converting existent static port array to idr. As a bonus it
make driver not to fail in case when no alias was specified in device
tree.
Note: there is no need in idr_destroy() because code doesn't unload
since ce87122911 ("serial: mps2-uart: make driver explicitly non-modular")
Signed-off-by: Vladimir Murzin <vladimir.murzin@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The tty struct holds a pointer to the driver's tty operations so drop
the unnecessary driver dereference when calling tiocmget and tiocmset.
Note that this also makes the calls match the preceding sanity checks as
expected.
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
... so that they can get CCed on platform patches.
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Darren Hart <dvhart@infradead.org>
Cc: Andy Shevchenko <andy@infradead.org>
Cc: x86@kernel.org
Link: https://lkml.kernel.org/r/20190128113619.19025-1-bp@alien8.de
Calling platform-specific code unconditionally blows up when running
an ARCH_MULTIPLATFORM kernel on a different platform. Don't do it.
Reported-by: Paolo Pisati <p.pisati@gmail.com>
Signed-off-by: Marc Gonzalez <marc.w.gonzalez@free.fr>
Acked-by: Pavel Machek <pavel@ucw.cz>
Cc: stable@vger.kernel.org # v4.8+
Fixes: a30eceb7a5 ("ARM: tango: add Suspend-to-RAM support")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
* Convert to new LVDS DT bindings fixing a regression introduced in v4.17
-----BEGIN PGP SIGNATURE-----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=mpfU
-----END PGP SIGNATURE-----
Merge tag 'renesas-fixes3-for-v5.0' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into arm/fixes
Third Round of Renesas ARM Based SoC Fixes for v5.0
* Convert to new LVDS DT bindings fixing a regression introduced in v4.17
* tag 'renesas-fixes3-for-v5.0' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
ARM: dts: r8a7743: Convert to new LVDS DT bindings
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
A couple of device tree fixes for the 5.0 cycle:
- Add missing clock-output-names for the osc24M clock on sun6i/A31
The Linux clock driver uses the device node as the clock name if
the property is missing. The node name was changed in 5.0-rc1,
breaking a subtle dependency in the sunxi-ng clock driver, and
renders Linux unable to completely boot up.
- Add alias for Ethernet controller on Beelink X2
This allows the bootloader to assign a deterministically generated
MAC address to it.
- Add property to enable USB VBUS regulator on OrangePi Win
The board had defined the constraints for the regulator, but was
missing the property to actually enable it.
-----BEGIN PGP SIGNATURE-----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=4km1
-----END PGP SIGNATURE-----
Merge tag 'sunxi-fixes-for-5.0' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/fixes
Allwinner Fixes for 5.0
A couple of device tree fixes for the 5.0 cycle:
- Add missing clock-output-names for the osc24M clock on sun6i/A31
The Linux clock driver uses the device node as the clock name if
the property is missing. The node name was changed in 5.0-rc1,
breaking a subtle dependency in the sunxi-ng clock driver, and
renders Linux unable to completely boot up.
- Add alias for Ethernet controller on Beelink X2
This allows the bootloader to assign a deterministically generated
MAC address to it.
- Add property to enable USB VBUS regulator on OrangePi Win
The board had defined the constraints for the regulator, but was
missing the property to actually enable it.
* tag 'sunxi-fixes-for-5.0' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
arm64: dts: allwinner: a64: Fix USB OTG regulator
ARM: dts: sun8i: h3: Add ethernet0 alias to Beelink X2
ARM: dts: sun6i: Add clock-output-names to osc24M clock
arm64: dts: allwinner: a64: Fix the video engine compatible
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Amlogic fixes for v5.0-rc, round 2
- several fixups for the GPIO cd-inverted change
- IRQ trigger fixes for MAC IRQ
* tag 'amlogic-fixes-2.1' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic:
arm64: dts: meson: Fix mmc cd-gpios polarity
ARM: dts: meson8m2: mxiii-plus: mark the SD card detection GPIO active-low
ARM: dts: meson8b: ec100: mark the SD card detection GPIO active-low
ARM: dts: meson8b: odroidc1: mark the SD card detection GPIO active-low
arm: dts: meson: Fix IRQ trigger type for macirq
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The device/driver model clearly mandates that bus driver that discover
and allocate the device must set the release callback. This callback
will be used to free the device after all references have gone away.
scmi bus driver is missing the obvious callback which will result in
the following warning if the device is unregistered:
Device 'scmi_dev.1' does not have a release() function, it is broken and
must be fixed. See Documentation/kobject.txt.
WARNING at drivers/base/core.c:922 device_release+0x8c/0xa0
Hardware name: ARM LTD Juno Development Platform BIOS EDK II Jan 21 2019
Workqueue: events deferred_probe_work_func
pstate: 60000005 (nZCv daif -PAN -UAO)
pc : device_release+0x8c/0xa0
lr : device_release+0x8c/0xa0
Call trace:
device_release+0x8c/0xa0
kobject_put+0x8c/0x208
device_unregister+0x30/0x78
scmi_device_destroy+0x28/0x50
scmi_probe+0x354/0x5b0
platform_drv_probe+0x58/0xa8
really_probe+0x2c4/0x3e8
driver_probe_device+0x12c/0x148
__device_attach_driver+0xac/0x150
bus_for_each_drv+0x78/0xd8
__device_attach+0xe0/0x168
device_initial_probe+0x24/0x30
bus_probe_device+0xa0/0xa8
deferred_probe_work_func+0x8c/0xe0
process_one_work+0x1f0/0x478
worker_thread+0x22c/0x450
kthread+0x134/0x138
ret_from_fork+0x10/0x1c
---[ end trace 420bdb7f6af50937 ]---
Fix the issue by providing scmi_device_release callback. We have
everything required for device release already in scmi_device_destroy,
so we just need to move freeing of the device to scmi_device_release.
Fixes: 933c504424 ("firmware: arm_scmi: add scmi protocol bus to enumerate protocol devices")
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Cc: stable@vger.kernel.org # 4.17+
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Booting 4.20 on a TheCUS N2100 results in a kernel oops while probing
PCI, due to n2100_pci_map_irq() having been discarded during boot.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Cc: stable@vger.kernel.org # 2.6.18+
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Device tree fixes for omaps for v5.0-rc cycle
This series of dts fixes for omap devices fixes several device specific
regressions:
- The onenand timings for n950/n9 have been wrong for a while since
we moved to dts based timings
- A typo for the cpcap pmic is now producing erors during boot as the
level should be 0 for unconfigurable triggering instead of 1
- Changes for ti-sysc for omap5 left uart3 with debug flags that should
not be set
- Fix a new dtc warning started showing up for omap3-gta04 grap_port
- With the generic MMC card detection code we need to fix the gpio
in dts for n900 and am335x-shc
* tag 'omap-for-v5.0/fixes-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: dts: am335x-shc.dts: fix wrong cd pin level
ARM: dts: n900: fix mmc1 card detect gpio polarity
ARM: dts: omap3-gta04: Fix graph_port warning
ARM: dts: Remove unnecessary idle flags for omap5 uart3
ARM: dts: omap4-droid4: Fix typo in cpcap IRQ flags
ARM: OMAP: dts: N950/N9: fix onenand timings
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This fixes a long standing typo in device-tree for DA850 in interrupt
number for timer. It did not affect us so far because we use non-DT
timer driver within mach-davinci. This was caught while migrating to
clocksource driver.
* tag 'davinci-fixes-for-v5.0-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci:
ARM: dts: da850: fix interrupt numbers for clocksource
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Qualcomm ARM64 Fixes for 5.0-rc3
* Fix irq controller compatible for the MSM8996 platforms
* tag 'qcom-fixes-for-5.0-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux:
arm64: dts: add msm8996 compatible to gicv3
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Second Round of Renesas ARM Based SoC Fixes for v5.0
Enable DMA for SCIF2 on R-Car M3-W (r8a7796) and M3-n (r8a77965), and
(RZ/G2M) r8a774a1 SoCs.
This is was omitted from patches enabling DMA for other SCIF devices on the
same SoCs due to missing documentation. However, it is regarded as a fix
as arguably those patches claim to add this feature.
Per-SoC patches are provided to ease backporting of this fix as the kernel
version to be fixed is different for each SoC.
* tag 'renesas-fixes2-for-v5.0' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
arm64: dts: renesas: r8a77965: Enable DMA for SCIF2
arm64: dts: renesas: r8a7796: Enable DMA for SCIF2
arm64: dts: renesas: r8a774a1: Enable DMA for SCIF2
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This is the pxa fixes set for v4.20 cycle:
- only a single devm allocated pointer free fix, which was never
triggered runtime but code analysis found.
* tag 'pxa-fixes-5.0' of https://github.com/rjarzmik/linux:
ARM: pxa: ssp: unneeded to free devm_ allocated data
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
i.MX fixes for 5.0, 2nd round:
It contains a single fix for i.MX8MQ clock numbers, removing the
duplicate use of 232 and numbering the clocks consecutively.
* tag 'imx-fixes-5.0-2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
dt-bindings: imx8mq: Number clocks consecutively
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- Fix spi_bus_bridge DTC warning by correcting '#address-cells' of
dspi3 node on vf610-bk4 board, as it's being used a SPI slave
controller there.
- Replace deprecated gpio-key,wakeup property with wakeup-source for
board imx6q-pistachio and imx6sll-evk, into which the deprecated
property sneaked during the merge window.
- Correct the backward compatible for i.MX6SX GPT device, as it's
actually compatible with i.MX6DL GPT rather than i.MX31 one.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJcO/B7AAoJEFBXWFqHsHzOsl4IAL1ubDbUA4T+mbL5joEdmZYZ
iOBVLq5L22uyqUU0i3qSoRi0Tym0ZKXJvP1XdNTlK4fJgabTlvJFlIssBM1FhUMk
pmIDrlCZeoMY1iIJ2OHQ9On9njRA/B+ClZFzFAPR/8iLMC70RB5NMKa8uXYxSQ21
EGjIlNsITD4F/IGt9eqdgt5fnfewgbnumxehvbcYPdreXVRuAyWXlPtc17mI+uof
DmnfANdDZ/VREGJwekQIu2D/VRo6jfC5jc24ixX4Fp5kPZ0CGmXxRzQmTVcm9QQ4
3jRMKf2PXlvW5vcqXLMoGJljVbeYITrF7ycswHge0LPs37ghjW+crAv5TzN6Agg=
=HZIA
-----END PGP SIGNATURE-----
Merge tag 'imx-fixes-5.0' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes
i.MX fixes for 5.0:
- Fix spi_bus_bridge DTC warning by correcting '#address-cells' of
dspi3 node on vf610-bk4 board, as it's being used a SPI slave
controller there.
- Replace deprecated gpio-key,wakeup property with wakeup-source for
board imx6q-pistachio and imx6sll-evk, into which the deprecated
property sneaked during the merge window.
- Correct the backward compatible for i.MX6SX GPT device, as it's
actually compatible with i.MX6DL GPT rather than i.MX31 one.
* tag 'imx-fixes-5.0' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
ARM: dts: imx6sx: correct backward compatible of gpt
ARM: dts: imx: replace gpio-key,wakeup with wakeup-source property
ARM: dts: vf610-bk4: fix incorrect #address-cells for dspi3
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
make dtbs_check:
arch/arm/boot/dts/r8a7790-stout.dt.yaml: compatible: ['renesas,stout', 'renesas,r8a7790'] is not valid under any of the given schemas
The Stout development board has an R-Car H2 (r8a7790) SoC, not an R-Car
H1 (r8a7779).
Fixes: 1274935056 ("dt-bindings: arm: Convert Renesas board/soc bindings to json-schema")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Add the pinctrl driver support for i.MX8MM.
Signed-off-by: Bai Ping <ping.bai@nxp.com>
Acked-by: Aisheng Dong <aisheng.dong@nxp.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
In the original code, some function names begin with "ingenic_gpio_",
and some with "gpio_ingenic_". For the sake of uniform style,
all of them are changed to the beginning of "ingenic_gpio_".
Signed-off-by: Zhou Yanjie <zhouyanjie@cduestc.edu.cn>
Reviewed-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Add mmc2 for JZ4770 and JZ4780:
According to the datasheet, both JZ4770 and JZ4780 have mmc2. But this
part of the original code is missing. It is worth noting that JZ4770's
mmc2 supports 8bit mode while JZ4780's does not, so we added the
corresponding code for both models.
Add nemc-wait for JZ4770 and JZ4780:
Both JZ4770 and JZ4780 have a nemc-wait pin. But this part of the
original code is missing.
Add mac for JZ4770:
JZ4770 have a mac. But this part of the original code is missing.
Signed-off-by: Zhou Yanjie <zhouyanjie@cduestc.edu.cn>
Reviewed-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Delete uart4 and i2c3/4 from JZ4770:
According to the datasheet, only JZ4780 have uart4 and i2c3/4. So we
remove it from the JZ4770 code and add a section corresponding the JZ4780.
Fix bugs in i2c0/1:
The pin number was wrong in the original code.
Fix bugs in uart2:
JZ4770 and JZ4780 have different uart2 pins. So the original section JZ4770
has been modified and the corresponding section of JZ4780 has been added.
Fix bugs in mmc0:
JZ4770 and JZ4780 assigned different pins to mmc0's 4~7 data lines. So the
original section JZ4770 has been modified and the corresponding section of
JZ4780 has been added.
Fix bugs in mmc1:
JZ4770's mmc1 has 8bit mode, while JZ4780 doesn't. So the original
section JZ4770 has been modified and the corresponding section of
JZ4780 has been added.
Fix bugs in nemc:
JZ4770's nemc has 16bit mode, while JZ4780 doesn't. So the original section
JZ4770 has been modified and the corresponding section of JZ4780 has been
added. And add missing cs2~5 groups for JZ4770 and JZ4780.
Fix bugs in cim:
JZ4770's cim has 12bit mode, while JZ4780 doesn't. So the original
section JZ4770 has been modified and the corresponding section of
JZ4780 has been added.
Fix bugs in lcd:
Both JZ4770 and JZ4780 lcd should be 24bit instead of 32bit.
Signed-off-by: Zhou Yanjie <zhouyanjie@cduestc.edu.cn>
Reviewed-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Xin Long says:
====================
sctp: support SCTP_FUTURE/CURRENT/ALL_ASSOC
This patchset adds the support for 3 assoc_id constants: SCTP_FUTURE_ASSOC
SCTP_CURRENT_ASSOC, SCTP_ALL_ASSOC, described in rfc6458#section-7.2:
All socket options set on a one-to-one style listening socket also
apply to all future accepted sockets. For one-to-many style sockets,
often a socket option will pass a structure that includes an assoc_id
field. This field can be filled with the association identifier of a
particular association and unless otherwise specified can be filled
with one of the following constants:
SCTP_FUTURE_ASSOC: Specifies that only future associations created
after this socket option will be affected by this call.
SCTP_CURRENT_ASSOC: Specifies that only currently existing
associations will be affected by this call, and future
associations will still receive the previous default value.
SCTP_ALL_ASSOC: Specifies that all current and future associations
will be affected by this call.
The functions for many other sockopts that use assoc_id also need to be
updated accordingly.
====================
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Check with SCTP_ALL_ASSOC instead in sctp_setsockopt_scheduler and
check with SCTP_FUTURE_ASSOC instead in sctp_getsockopt_scheduler,
it's compatible with 0.
SCTP_CURRENT_ASSOC is supported for SCTP_STREAM_SCHEDULER in this
patch. It also adds default_ss in sctp_sock to support
SCTP_FUTURE_ASSOC.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Check with SCTP_ALL_ASSOC instead in sctp_setsockopt_event and
check with SCTP_FUTURE_ASSOC instead in sctp_getsockopt_event,
it's compatible with 0.
SCTP_CURRENT_ASSOC is supported for SCTP_EVENT in this patch.
It also adds sctp_assoc_ulpevent_type_set() to make code more
readable.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Check with SCTP_ALL_ASSOC instead in sctp_setsockopt_enable_strreset and
check with SCTP_FUTURE_ASSOC instead in sctp_getsockopt_enable_strreset,
it's compatible with 0.
SCTP_CURRENT_ASSOC is supported for SCTP_ENABLE_STREAM_RESET in this patch.
It also adjusts some code to keep a same check form as other functions.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Check with SCTP_ALL_ASSOC instead in sctp_setsockopt_default_prinfo and
check with SCTP_FUTURE_ASSOC instead in sctp_getsockopt_default_prinfo,
it's compatible with 0.
SCTP_CURRENT_ASSOC is supported for SCTP_DEFAULT_PRINFO in this patch.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Check with SCTP_ALL_ASSOC instead in sctp_setsockopt_deactivate_key.
SCTP_CURRENT_ASSOC is supported for SCTP_AUTH_DEACTIVATE_KEY in this
patch.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Check with SCTP_ALL_ASSOC instead in sctp_setsockopt_del_key.
SCTP_CURRENT_ASSOC is supported for SCTP_AUTH_DELETE_KEY in this patch.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Check with SCTP_ALL_ASSOC instead in sctp_setsockopt_auth_key.
SCTP_CURRENT_ASSOC is supported for SCTP_AUTH_ACTIVE_KEY in this patch.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Check with SCTP_ALL_ASSOC instead in sctp_setsockopt_auth_key.
SCTP_CURRENT_ASSOC is supported for SCTP_AUTH_KEY in this patch.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Check with SCTP_ALL_ASSOC instead in sctp_setsockopt_maxburst and
check with SCTP_FUTURE_ASSOC instead in sctp_getsockopt_maxburst,
it's compatible with 0.
SCTP_CURRENT_ASSOC is supported for SCTP_CONTEXT in this patch.
It also adjusts some code to keep a same check form as other
functions.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Check with SCTP_ALL_ASSOC instead in sctp_setsockopt_context and
check with SCTP_FUTURE_ASSOC instead in sctp_getsockopt_context,
it's compatible with 0.
SCTP_CURRENT_ASSOC is supported for SCTP_CONTEXT in this patch.
It also adjusts some code to keep a same check form as other
functions.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Check with SCTP_ALL_ASSOC instead in sctp_setsockopt_default_sndinfo and
check with SCTP_FUTURE_ASSOC instead in sctp_getsockopt_default_sndinfo,
it's compatible with 0.
SCTP_CURRENT_ASSOC is supported for SCTP_DEFAULT_SNDINFO in this patch.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Check with SCTP_ALL_ASSOC instead in sctp_setsockopt_default_send_param and
check with SCTP_FUTURE_ASSOC instead in sctp_getsockopt_default_send_param,
it's compatible with 0.
SCTP_CURRENT_ASSOC is supported for SCTP_DEFAULT_SEND_PARAM in this patch.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Check with SCTP_ALL_ASSOC instead in sctp_setsockopt_delayed_ack and
check with SCTP_FUTURE_ASSOC instead in sctp_getsockopt_delayed_ack,
it's compatible with 0.
SCTP_CURRENT_ASSOC is supported for SCTP_DELAYED_SACK in this patch.
It also adds sctp_apply_asoc_delayed_ack() to make code more readable.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
SCTP_STREAM_SCHEDULER_VALUE is a special one, as its value is not
save in sctp_sock, but only in asoc. So only SCTP_CURRENT_ASSOC
reserved assoc_id can be used in sctp_setsockopt_scheduler_value.
This patch adds SCTP_CURRENT_ASOC support for
SCTP_STREAM_SCHEDULER_VALUE.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Check with SCTP_FUTURE_ASSOC instead in
sctp_set/getsockopt_reconfig_supported, it's compatible with 0.
It also adjusts some code to keep a same check form as other functions.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Check with SCTP_FUTURE_ASSOC instead in
sctp_set/getsockopt_reconfig_supported, it's compatible with 0.
It also adjusts some code to keep a same check form as other functions.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Check with SCTP_FUTURE_ASSOC instead in
sctp_set/getsockopt_pr_supported, it's compatible with 0.
It also adjusts some code to keep a same check form as other functions.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Check with SCTP_FUTURE_ASSOC instead in
sctp_set/getsockopt_paddr_thresholds, it's compatible with 0.
It also adds pf_retrans in sctp_sock to support SCTP_FUTURE_ASSOC.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Check with SCTP_FUTURE_ASSOC instead in
sctp_getsockopt_local_auth_chunks, it's compatible with 0.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Check with SCTP_FUTURE_ASSOC instead in
sctp_set/getsockopt_maxseg, it's compatible with 0.
Also check asoc_id early as other sctp setsockopts does.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Check with SCTP_FUTURE_ASSOC instead in
sctp_set/getsockopt_associnfo, it's compatible with 0.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Check with SCTP_FUTURE_ASSOC instead in
sctp_set/getsockopt_rtoinfo, it's compatible with 0.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Check with SCTP_FUTURE_ASSOC instead in
sctp_/setgetsockopt_peer_addr_params, it's compatible with 0.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
