This introduces stride and offset configuration for the VPU tiling mode.
Stride is calculated differently than it is for linear formats and an
offset is calculated, for which new register definitions are introduced.
Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190118145133.21281-14-paul.kocialkowski@bootlin.com
This introduces the data input mode definitions for the tiled YUV mode,
that are used in the input mode helper if tiling is requested.
The modifier is passed to the helper from the framebuffer to determine
if tiling is requested.
Only semiplanar and planar YUV formats are supported for tiling mode.
Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190118145133.21281-13-paul.kocialkowski@bootlin.com
This introduces specific definitions for vendor Allwinner and its
associated tiled format modifier. This modifier is used for the output
format of the VPU, that can be imported directly with the display
engine hardware supported by the sun4i-drm driver.
Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Reviewed-by: Maxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190118145133.21281-12-paul.kocialkowski@bootlin.com
Planar YUV formats come with 3 distinct planes, which requires
configuring the frontend line stride and address registers for the
third plane.
Our hardware only supports the YUV planes order and in order to support
formats with a YVU plane order, a helper is introduced to indicate
whether to invert the address of the two chroma planes.
Missing definitions for YUV411 and YUV444 input format configuration are
also introduced as support is added for these formats. For the input
sequence part, no configuration is required for planar YUV formats so
zero is returned in that case.
Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190118145133.21281-11-paul.kocialkowski@bootlin.com
When stopping audio, ASoC will first stop DMA then CPU DAI.
Sometimes there is a delay between DMA stop and CPU DAI stop, which
triggers an underrun error. Now, because of the delay introduced
by dev_err another underrun error will occur causing a vicious circle
making impossible to stop CPU DAI.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Deferred probes shouldn't cause error messages in the boot log, so
change the dev_err() to the more harmless dev_info().
Signed-off-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Mark Brown <broonie@kernel.org>
Probe deferral is to be expected during normal operation, so avoid
printing an error when it is encountered.
Removing the goto would not be strictly necessary. However, if
code gets added later, the cleanup in the EPROBE_DEFER case likely
would get missed.
Signed-off-by: Stefan Agner <stefan@agner.ch>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Acked-by: Nicolin Chen <nicoleotsuka@gmail.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Probe deferral is to be expected during normal operation, so avoid
printing an error when it is encountered.
Signed-off-by: Stefan Agner <stefan@agner.ch>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Acked-by: Nicolin Chen <nicoleotsuka@gmail.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Probe deferral is to be expected during normal operation, so avoid
printing an error when it is encountered.
Signed-off-by: Stefan Agner <stefan@agner.ch>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Acked-by: Nicolin Chen <nicoleotsuka@gmail.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Not finding the codec/SSI instance can be due to probe deferral.
Do not print error messages in those cases.
Signed-off-by: Stefan Agner <stefan@agner.ch>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Acked-by: Nicolin Chen <nicoleotsuka@gmail.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Semi-planar YUV formats use two distinct planes, one for luminance and
one for chrominance. To add support for them, we need to configure the
second line stride and buffer address registers to setup the second YUV
plane.
New definitions are introduced to configure the input format register
for the YUV420 and YUV422 semi-planar formats.
Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190118145133.21281-10-paul.kocialkowski@bootlin.com
Make sure to properly put the of node in case finding the codec
fails.
Fixes: 81e8e49261 ("ASoC: fsl: add sgtl5000 clock support for imx-sgtl5000")
Signed-off-by: Stefan Agner <stefan@agner.ch>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Acked-by: Nicolin Chen <nicoleotsuka@gmail.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
This introduces support for packed YUV formats with 4:2:2 sampling using
the frontend. Definitions are introduced for the data format and pixel
sequence input format register values.
Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190118145133.21281-9-paul.kocialkowski@bootlin.com
Add the missing MODULE_DEVICE_TABLE and remove the comma from the
separator on the end of the of_device_id array.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
In prevision of adding support for YUV formats, set the YUV to RGB
colorspace conversion coefficients if required and don't bypass the
CSC engine when converting.
The BT601 coefficients from the A33 BSP are copied over from the backend
code. Because of module inter-dependency, we can't have the frontend use
these coefficients from the backend directly.
Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190118145133.21281-8-paul.kocialkowski@bootlin.com
Both the backend and the frontend need the BT.601 CSC coefficients for
YUV to RGB conversion. Since the backend has a dependency on the
frontend (and not the other way round), move the coefficients there
so that both can access them without having to duplicate them.
Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190118145133.21281-7-paul.kocialkowski@bootlin.com
Since all the RGB input formats have the same value for the DATA_FMT
field of the INPUT_FMT register, we can group them when the format is
known to be RGB. Here, we assume that a non-YUV format is RGB, because
the hardware does not support any other colorspace than RGB and YUV.
Use the DRM format info structure to check whether the format uses a
YUV colorspace.
Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190118145133.21281-6-paul.kocialkowski@bootlin.com
The helper returning the input mode needs to know the number of planes
for the provided format. Passing the fourcc requires iterating through
the format info list in order to return the number of planes.
Pass the DRM format info structure directly instead to all helpers
related to configuring the input format, since it's available to the
caller. Also rename the input format in the caller function to keep
things consistent.
Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190118145133.21281-5-paul.kocialkowski@bootlin.com
Checking for the number of planes is not sufficient to en ensure that
the format is a packed YUV422.
Use explicit fourcc helpers for the check instead.
Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190118145133.21281-4-paul.kocialkowski@bootlin.com
Display engine drivers often need to distinguish between different types of
YUV sub-sampling. This introduces helpers to check for common sub-sampling
ratios in their commonly-used denomination from the DRM format info.
Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Reviewed-by: Maxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190118145133.21281-3-paul.kocialkowski@bootlin.com
It is often useful to check whether the DRM format info retrieved from
the DRM framebuffer matches a specific YUV planes disposition.
This introduces helpers to quickly check that a provided format info
matches a YUV format with a specific disposition, in commonly-used
terminology.
The intent of providing helpers taking the format info instead of the
fourcc alone is to avoid the overhead of iterating through all formats
when the whole format info structure is available. As a result, these
helpers are very simple so they are made inline.
Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Reviewed-by: Maxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190118145133.21281-2-paul.kocialkowski@bootlin.com
A couple of weeks of fixes.
There's one fix for an oops on Power9 machines with Open CAPI adapters.
And a fix for probable memory corruption in some of the new NPU code, caught by
smatch though and not seen in the wild.
Plus a few other minor fixes.
There's one non-fix which is the perf_regs change. That was sent during the
merge window but I accidentally only merged the first of two patches in the
series. It's been in linux-next so hopefully doesn't conflict with anything in
acme's tree.
Thanks to:
Alexey Kardashevskiy, Andrew Donnellan, Breno Leitao, Christian Lamparter,
Christophe Leroy, Dan Carpenter, Frederic Barrat, Greg Kurz, Jason A.
Donenfeld, Madhavan Srinivasan.
-----BEGIN PGP SIGNATURE-----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=hlZ7
-----END PGP SIGNATURE-----
Merge tag 'powerpc-5.0-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
"A couple of weeks of fixes.
There's one fix for an oops on Power9 machines with Open CAPI
adapters.
And a fix for probable memory corruption in some of the new NPU code,
caught by smatch though and not seen in the wild.
Plus a few other minor fixes.
There's one non-fix which is the perf_regs change. That was sent
during the merge window but I accidentally only merged the first of
two patches in the series. It's been in linux-next so hopefully
doesn't conflict with anything in acme's tree.
Thanks to: Alexey Kardashevskiy, Andrew Donnellan, Breno Leitao,
Christian Lamparter, Christophe Leroy, Dan Carpenter, Frederic Barrat,
Greg Kurz, Jason A. Donenfeld, Madhavan Srinivasan"
* tag 'powerpc-5.0-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/syscalls: Fix syscall tracing
powerpc/pseries: Fix build break due to pnv_npu2_init()
powerpc/4xx/ocm: Fix fix for phys_addr_t printf warnings
powerpc/powernv/npu: Fix oops in pnv_try_setup_npu_table_group()
powerpc/tm: Limit TM code inside PPC_TRANSACTIONAL_MEM
powerpc/8xx: fix setting of pagetable for Abatron BDI debug tool.
powerpc/powernv/npu: Allocate enough memory in pnv_try_setup_npu_table_group()
powerpc/perf: Update perf_regs structure to include MMCRA
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRTLbB6QfY48x44uB6AXGG7T9hjvgUCXEGhYwAKCRCAXGG7T9hj
vu/qAP4ljV1QwAicTP2IosIpmSojJV4BkkJOs36dgF1u4DscPAEA7YhvTzGYcZr6
7rmBIbGve6Yb24Uh4aL3ir4w+LUvSAg=
=Jm9L
-----END PGP SIGNATURE-----
Merge tag 'for-linus-5.0-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen fixes from Juergen Gross:
- Several fixes for the Xen pvcalls drivers (1 fix for the backend and
8 for the frontend).
- A fix for a rather longstanding bug in the Xen sched_clock()
interface which led to weird time jumps when migrating the system.
- A fix for avoiding accesses to x2apic MSRs in Xen PV guests.
* tag 'for-linus-5.0-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen: Fix x86 sched_clock() interface for xen
pvcalls-front: fix potential null dereference
always clear the X2APIC_ENABLE bit for PV guest
pvcalls-front: Avoid get_free_pages(GFP_KERNEL) under spinlock
xen/pvcalls: remove set but not used variable 'intf'
pvcalls-back: set -ENOTCONN in pvcalls_conn_back_read
pvcalls-front: don't return error when the ring is full
pvcalls-front: properly allocate sk
pvcalls-front: don't try to free unallocated rings
pvcalls-front: read all data before closing the connection
Pull crypto fixes from Herbert Xu:
"This fixes the following issues:
- Zero-length DMA mapping in caam
- Invalidly mapping stack memory for DMA in talitos
- Use after free in cavium/nitrox
- Key parsing in authenc
- Undefined shift in sm3
- Bogus completion call in authencesn
- SHA support detection in caam"
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: sm3 - fix undefined shift by >= width of value
crypto: talitos - fix ablkcipher for CONFIG_VMAP_STACK
crypto: talitos - reorder code in talitos_edesc_alloc()
crypto: adiantum - initialize crypto_spawn::inst
crypto: cavium/nitrox - Use after free in process_response_list()
crypto: authencesn - Avoid twice completion call in decrypt path
crypto: caam - fix SHA support detection
crypto: caam - fix zero-length buffer DMA mapping
crypto: ccree - convert to use crypto_authenc_extractkeys()
crypto: bcm - convert to use crypto_authenc_extractkeys()
crypto: authenc - fix parsing key with misaligned rta_len
- Restore the ACPI initialization ordering changed implicitly by the
module-level AML handling rework during the 4.17 development cycle
that caused the EC address space handler based on information from
ECDT to be set up before loading AML definition blocks, making it
effectively not accessible by AML on some systems that don't work
as expected any more (Rafael Wysocki).
- Add direct dependencies on PCI to Kconfig in multiple places for
code that depends on both ACPI and PCI, but the PCI dependency
was implicitly satisfied by the ACPI dependency before, to prevent
invalid configurations from being created, for example by
randconfig (Sinan Kaya).
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iQIcBAABCAAGBQJcQa4DAAoJEILEb/54YlRxpIgQAIs35RTfUtGZHm4ripw6fOli
6NAK9NaBGcJ6OEPUkD+O3dqCtMU+dZapv3qLxqs5q+VTpJUPWKmV1QJTkaeyiuJ/
BiY0Ftkg/QRDXVV1jlMSSxWadDKsuK/B+QbWFH2JRXJMtS1659XMW1pTPoYGfdt4
Q8VUF5ITa7uN6uZMEsCFWAztDFlmMff2w+YO3Lr0gUNLrTFmo+aQgJHY3PGgsNWj
Ev0JF+IhRYXerSGDQOiCh8VHQfa1scockUbHyYuUxiWVbB83OD1pODPAX2St9dTl
dW/agYDzAGEE9DItLNdX3UBWeWj2qRfzWeiDrBa80C5CbRD6e7GoDW+tM4xVQdkn
kXns9xCeXNQZOwJO/KM5G6u8zLs+oehRsBdz5vi/+DaCv9yuhGGdHAIU3Tj1qWwr
IIFrZf2mfpS2WSjSoHP93l7S5l4dSu8hmGyvOfcjevkFA9qVWcieOlNpvoP80bpl
ctSRYCaLLxXEvLvv9dNUVsYwuLiO8fccSSnCf/SzMdyeAiHc2yPY+pX5jeGn3b0g
w5SMW/OkMmWPWoanBnx0OEg8K+nlD+0qhF2Yn0+wKHRaSKgj/wU7H5+NmrXU4gxn
LaPYOCPmij7V7Sexxxty0zfEPLcvig4cMtApMZar3lNtyIr6q6i4FscTk+CrUNL/
/Kl2vkiHIHJNW6+oDuBP
=t7iI
-----END PGP SIGNATURE-----
Merge tag 'acpi-5.0-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fixes from Rafael Wysocki:
"These fix an ACPI initialization ordering issue introduced in the 4.17
time frame and causing functional problems to appear on multiple
systems and fix some fallout of the recent change to enable building
kernels with ACPI support and without PCI.
Specifics:
- Restore the ACPI initialization ordering changed implicitly by the
module-level AML handling rework during the 4.17 development cycle
that caused the EC address space handler based on information from
ECDT to be set up before loading AML definition blocks, making it
effectively not accessible by AML on some systems that don't work
as expected any more (Rafael Wysocki).
- Add direct dependencies on PCI to Kconfig in multiple places for
code that depends on both ACPI and PCI, but the PCI dependency was
implicitly satisfied by the ACPI dependency before, to prevent
invalid configurations from being created, for example by
randconfig (Sinan Kaya)"
* tag 'acpi-5.0-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: EC: Look for ECDT EC after calling acpi_load_tables()
drivers: thermal: int340x_thermal: Make PCI dependency explicit
x86/intel/lpss: Make PCI dependency explicit
platform/x86: apple-gmux: Make PCI dependency explicit
platform/x86: intel_pmc: Make PCI dependency explicit
platform/x86: intel_ips: make PCI dependency explicit
vga-switcheroo: make PCI dependency explicit
ata: pata_acpi: Make PCI dependency explicit
ACPI / LPSS: Make PCI dependency explicit
Pull the PCM suspend improvement / cleanup.
This moves the most of snd_pcm_suspend*() calls into PCM's own device
PM ops. There should be no change from the functionality POV.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The cleaner thread usually takes care of delayed iputs, with the
exception of the btrfs_end_transaction_throttle path. Delaying iputs
means we are potentially delaying the eviction of an inode and it's
respective space. The cleaner thread only gets woken up every 30
seconds, or when we require space. If there are a lot of inodes that
need to be deleted we could induce a serious amount of latency while we
wait for these inodes to be evicted. So instead wakeup the cleaner if
it's not already awake to process any new delayed iputs we add to the
list. If we suddenly need space we will less likely be backed up
behind a bunch of inodes that are waiting to be deleted, and we could
possibly free space before we need to get into the flushing logic which
will save us some latency.
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Delayed iputs means we can have final iputs of deleted inodes in the
queue, which could potentially generate a lot of pinned space that could
be free'd. So before we decide to commit the transaction for ENOPSC
reasons, run the delayed iputs so that any potential space is free'd up.
If there is and we freed enough we can then commit the transaction and
potentially be able to make our reservation.
Reviewed-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This reverts commit e73e81b6d0.
This patch causes a few problems:
- adds latency to btrfs_finish_ordered_io
- as btrfs_finish_ordered_io is used for free space cache, generating
more work from btrfs_btree_balance_dirty_nodelay could end up in the
same workque, effectively deadlocking
12260 kworker/u96:16+btrfs-freespace-write D
[<0>] balance_dirty_pages+0x6e6/0x7ad
[<0>] balance_dirty_pages_ratelimited+0x6bb/0xa90
[<0>] btrfs_finish_ordered_io+0x3da/0x770
[<0>] normal_work_helper+0x1c5/0x5a0
[<0>] process_one_work+0x1ee/0x5a0
[<0>] worker_thread+0x46/0x3d0
[<0>] kthread+0xf5/0x130
[<0>] ret_from_fork+0x24/0x30
[<0>] 0xffffffffffffffff
Transaction commit will wait on the freespace cache:
838 btrfs-transacti D
[<0>] btrfs_start_ordered_extent+0x154/0x1e0
[<0>] btrfs_wait_ordered_range+0xbd/0x110
[<0>] __btrfs_wait_cache_io+0x49/0x1a0
[<0>] btrfs_write_dirty_block_groups+0x10b/0x3b0
[<0>] commit_cowonly_roots+0x215/0x2b0
[<0>] btrfs_commit_transaction+0x37e/0x910
[<0>] transaction_kthread+0x14d/0x180
[<0>] kthread+0xf5/0x130
[<0>] ret_from_fork+0x24/0x30
[<0>] 0xffffffffffffffff
And then writepages ends up waiting on transaction commit:
9520 kworker/u96:13+flush-btrfs-1 D
[<0>] wait_current_trans+0xac/0xe0
[<0>] start_transaction+0x21b/0x4b0
[<0>] cow_file_range_inline+0x10b/0x6b0
[<0>] cow_file_range.isra.69+0x329/0x4a0
[<0>] run_delalloc_range+0x105/0x3c0
[<0>] writepage_delalloc+0x119/0x180
[<0>] __extent_writepage+0x10c/0x390
[<0>] extent_write_cache_pages+0x26f/0x3d0
[<0>] extent_writepages+0x4f/0x80
[<0>] do_writepages+0x17/0x60
[<0>] __writeback_single_inode+0x59/0x690
[<0>] writeback_sb_inodes+0x291/0x4e0
[<0>] __writeback_inodes_wb+0x87/0xb0
[<0>] wb_writeback+0x3bb/0x500
[<0>] wb_workfn+0x40d/0x610
[<0>] process_one_work+0x1ee/0x5a0
[<0>] worker_thread+0x1e0/0x3d0
[<0>] kthread+0xf5/0x130
[<0>] ret_from_fork+0x24/0x30
[<0>] 0xffffffffffffffff
Eventually, we have every process in the system waiting on
balance_dirty_pages(), and nobody is able to make progress on page
writeback.
The original patch tried to fix an OOM condition, that happened on 4.4 but no
success reproducing that on later kernels (4.19 and 4.20). This is more likely
a problem in OOM itself.
Link: https://lore.kernel.org/linux-btrfs/20180528054821.9092-1-ethanlien@synology.com/
Reported-by: Chris Mason <clm@fb.com>
CC: stable@vger.kernel.org # 4.18+
CC: ethanlien <ethanlien@synology.com>
Signed-off-by: David Sterba <dsterba@suse.com>
As the description of struct device_private says, it stores data which
is private to driver core. And it already has similar fields like:
knode_parent, knode_driver, knode_driver and knode_bus. This look it is
more proper to put knode_class together with those fields to make it
private to driver core.
This patch move device->knode_class to device_private to make it comply
with code convention.
Signed-off-by: Wei Yang <richardw.yang@linux.intel.com>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Some F17h models do not have CPB set in CPUID even though the CPU
supports it. Set the feature bit unconditionally on all F17h.
[ bp: Rewrite commit message and patch. ]
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Tom Lendacky <thomas.lendacky@amd.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Sherry Hurwitz <sherry.hurwitz@amd.com>
Cc: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: x86-ml <x86@kernel.org>
Link: https://lkml.kernel.org/r/20181120030018.5185-1-jiaxun.yang@flygoat.com
When building and have fragment CONFIG_NO_IOPORT_MAP enabled then the
following warning:
../drivers/misc/pvpanic.c: In function ‘pvpanic_walk_resources’:
../drivers/misc/pvpanic.c:73:10: error: implicit declaration of
function ‘ioport_map’; did you mean ‘ioremap’?
[-Werror=implicit-function-declaration]
base = ioport_map(r.start, resource_size(&r));
^~~~~~~~~~
Since commmit 5d32a66541 ("PCI/ACPI: Allow ACPI to be built without
CONFIG_PCI set"), its now possible to have ACPI enabled without haveing
PCI enabled. However, the pvpanic driver depends on HAS_IOPORT_MAP or
HAVE_IOREMAP_PROT when ACPI is enabled. It was fine until
commit 725eba2928 ("misc/pvpanic: add MMIO support") got added.
Rework so that we do a extra check ifdef CONFIG_HAS_IOPORT_MAP.
Fixes: 5d32a66541 ("PCI/ACPI: Allow ACPI to be built without CONFIG_PCI set")
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Anders Roxell <anders.roxell@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ipcnum is indirectly controlled by user-space, hence leading to
a potential exploitation of the Spectre variant 1 vulnerability.
This issue was detected with the help of Smatch:
drivers/char/mwave/mwavedd.c:299 mwave_ioctl() warn: potential spectre issue 'pDrvData->IPCs' [w] (local cap)
Fix this by sanitizing ipcnum before using it to index pDrvData->IPCs.
Notice that given that speculation windows are large, the policy is
to kill the speculation on the first load and not worry if it can be
completed with a dependent load/store [1].
[1] https://marc.info/?l=linux-kernel&m=152449131114778&w=2
Cc: stable@vger.kernel.org
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
One of the more common cases of allocation size calculations is finding the
size of a structure that has a zero-sized array at the end, along with memory
for some number of elements for that array. For example:
struct foo {
int stuff;
void *entry[];
};
instance = kzalloc(sizeof(struct foo) + sizeof(void *) * count, GFP_KERNEL);
Instead of leaving these open-coded and prone to type mistakes, we can now
use the new struct_size() helper:
instance = kzalloc(struct_size(instance, entry, count), GFP_KERNEL);
This code was detected with the help of Coccinelle.
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ics932s401_update_device may fail reading in i2c_smbus_read_word_data
due to error in i2c_smbus_xfer. The fix checks the status and defaults
the register to 0.
Signed-off-by: Aditya Pakki <pakki001@umn.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There is a hunk of code in a case statement that is indented one level
too deeply, fix this by removing extra tabs. Also remove one empty line.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Change snprintf to scnprintf. There are generally two cases where using
snprintf causes problems.
1) Uses of size += snprintf(buf, SIZE - size, fmt, ...)
In this case, if snprintf would have written more characters than what the
buffer size (SIZE) is, then size will end up larger than SIZE. In later
uses of snprintf, SIZE - size will result in a negative number, leading
to problems. Note that size might already be too large by using
size = snprintf before the code reaches a case of size += snprintf.
2) If size is ultimately used as a length parameter for a copy back to user
space, then it will potentially allow for a buffer overflow and information
disclosure when size is greater than SIZE. When the size is used to index
the buffer directly, we can have memory corruption. This also means when
size = snprintf... is used, it may also cause problems since size may become
large. Copying to userspace is mitigated by the HARDENED_USERCOPY kernel
configuration.
The solution to these issues is to use scnprintf which returns the number of
characters actually written to the buffer, so the size variable will never
exceed SIZE.
Signed-off-by: Silvio Cesare <silvio.cesare@gmail.com>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Greg KH <greg@kroah.com>
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
hdmi-codec oopses the kernel when it is unbound from a successfully
bound audio subsystem, and is then rebound:
Unable to handle kernel NULL pointer dereference at virtual address 0000001c
pgd = ee3f0000
[0000001c] *pgd=3cc59831
Internal error: Oops: 817 [#1] PREEMPT ARM
Modules linked in: ext2 snd_soc_spdif_tx vmeta dove_thermal snd_soc_kirkwood ofpart marvell_cesa m25p80 orion_wdt mtd spi_nor des_generic gpio_ir_recv snd_soc_kirkwood_spdif bmm_dmabuf auth_rpcgss nfsd autofs4 etnaviv thermal_sys hwmon gpu_sched tda9950
CPU: 0 PID: 1005 Comm: bash Not tainted 4.20.0+ #1762
Hardware name: Marvell Dove (Cubox)
PC is at hdmi_dai_probe+0x68/0x80
LR is at find_held_lock+0x20/0x94
pc : [<c04c7de0>] lr : [<c0063bf4>] psr: 600f0013
sp : ee15bd28 ip : eebd8b1c fp : c093b488
r10: ee048000 r9 : eebdab18 r8 : ee048600
r7 : 00000001 r6 : 00000000 r5 : 00000000 r4 : ee82c100
r3 : 00000006 r2 : 00000001 r1 : c067e38c r0 : ee82c100
Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none[ 297.318599] Control: 10c5387d Table: 2e3f0019 DAC: 00000051
Process bash (pid: 1005, stack limit = 0xee15a248)
...
[<c04c7de0>] (hdmi_dai_probe) from [<c04b7060>] (soc_probe_dai.part.9+0x34/0x70)
[<c04b7060>] (soc_probe_dai.part.9) from [<c04b81a8>] (snd_soc_instantiate_card+0x734/0xc9c)
[<c04b81a8>] (snd_soc_instantiate_card) from [<c04b8b6c>] (snd_soc_add_component+0x29c/0x378)
[<c04b8b6c>] (snd_soc_add_component) from [<c04b8c8c>] (snd_soc_register_component+0x44/0x54)
[<c04b8c8c>] (snd_soc_register_component) from [<c04c64b4>] (devm_snd_soc_register_component+0x48/0x84)
[<c04c64b4>] (devm_snd_soc_register_component) from [<c04c7be8>] (hdmi_codec_probe+0x150/0x260)
[<c04c7be8>] (hdmi_codec_probe) from [<c0373124>] (platform_drv_probe+0x48/0x98)
This happens because hdmi_dai_probe() attempts to access the HDMI
codec private data, but this has not been assigned by hdmi_dai_probe()
before it calls devm_snd_soc_register_component(). Move the call to
dev_set_drvdata() before devm_snd_soc_register_component() to avoid
this oops.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org
A better way to implement this from userspace has been found without
specific code in the kernel side, revert this.
Fixes: b9ccc07e3f ("netfilter: nft_hash: add map lookups for hashing operations")
Signed-off-by: Laura Garcia Liebana <nevola@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Not used since 203f2e7820 ("netfilter: nat: remove l4proto->unique_tuple")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
In the ip_rcv the skb goes through the PREROUTING hook first, then kicks
in vrf device and go through the same hook again. When conntrack dnat
works with vrf, there will be some conflict with rules because the
packet goes through the hook twice with different nf status.
ip link add user1 type vrf table 1
ip link add user2 type vrf table 2
ip l set dev tun1 master user1
ip l set dev tun2 master user2
nft add table firewall
nft add chain firewall zones { type filter hook prerouting priority - 300 \; }
nft add rule firewall zones counter ct zone set iif map { "tun1" : 1, "tun2" : 2 }
nft add chain firewall rule-1000-ingress
nft add rule firewall rule-1000-ingress ct zone 1 tcp dport 22 ct state new counter accept
nft add rule firewall rule-1000-ingress counter drop
nft add chain firewall rule-1000-egress
nft add rule firewall rule-1000-egress tcp dport 22 ct state new counter drop
nft add rule firewall rule-1000-egress counter accept
nft add chain firewall rules-all { type filter hook prerouting priority - 150 \; }
nft add rule firewall rules-all ip daddr vmap { "2.2.2.11" : jump rule-1000-ingress }
nft add rule firewall rules-all ct zone vmap { 1 : jump rule-1000-egress }
nft add rule firewall dnat-all ct zone vmap { 1 : jump dnat-1000 }
nft add rule firewall dnat-1000 ip daddr 2.2.2.11 counter dnat to 10.0.0.7
For a package with ip daddr 2.2.2.11 and tcp dport 22, first time accept in the
rule-1000-ingress and dnat to 10.0.0.7. Then second time the packet goto the wrong
chain rule-1000-egress which leads the packet drop
With this patch, userspace can add the 'don't re-do entire ruleset for
vrf' policy itself via:
nft add rule firewall rules-all meta iifkind "vrf" counter accept
Signed-off-by: wenxu <wenxu@ucloud.cn>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
These options are not present in some (all?) clang versions, so when we
build for a distro that has a gcc new enough to have these options and
that the distro python build config settings use them but clang doesn't
support, b00m.
This is the case with fedora rawhide (now gearing towards f30), so check
if clang has the and remove the missing ones from CFLAGS.
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Thiago Macieira <thiago.macieira@intel.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-5q50q9w458yawgxf9ez54jbp@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The way we allocate events works fine in most cases, except
when multiple PCI devices share an ITS-visible DevID, and that
one of them is trying to use MultiMSI allocation.
In that case, our allocation is not guaranteed to be zero-based
anymore, and we have to make sure we allocate it on a boundary
that is compatible with the PCI Multi-MSI constraints.
Fix this by allocating the full region upfront instead of iterating
over the number of MSIs. MSI-X are always allocated one by one,
so this shouldn't change anything on that front.
Fixes: b48ac83d6b ("irqchip: GICv3: ITS: MSI support")
Cc: stable@vger.kernel.org
Reported-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
