Reuse the string machine from the device tree data structure instead
of duplicating the data again. This also prevents a potential memory
allocation failure that was not handled previously. Also fixes an early
put of root device node.
Reported-by: Nicholas Mc Guire <hofrat@osadl.org>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
It's not a core function, and the matching atomic functions are also
not in the core. Plus the suspend/resume helper is also already there.
Needs a tiny bit of open-coding, but less midlayer beats that I think.
v2: Rebase onto ast (which gained a new user).
Cc: Sam Bobroff <sbobroff@linux.ibm.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Sean Paul <sean@poorly.run>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <maxime.ripard@bootlin.com>
Cc: Sean Paul <sean@poorly.run>
Cc: David Airlie <airlied@linux.ie>
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: "David (ChunMing) Zhou" <David1.Zhou@amd.com>
Cc: Rex Zhu <Rex.Zhu@amd.com>
Cc: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Cc: Huang Rui <ray.huang@amd.com>
Cc: Shaoyun Liu <Shaoyun.Liu@amd.com>
Cc: Monk Liu <Monk.Liu@amd.com>
Cc: nouveau@lists.freedesktop.org
Cc: amd-gfx@lists.freedesktop.org
Link: https://patchwork.freedesktop.org/patch/msgid/20181217194303.14397-4-daniel.vetter@ffwll.ch
A feature has been added in the libahci driver: the possibility to set
a new flag in hpriv->flags to let the core handle PHY suspend/resume
automatically. Make use of this feature to make suspend to RAM work
with SATA drives on A3700.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
A3700 comphy initialization is done in the firmware (TF-A). Looking at
the SATA PHY initialization routine, there is a comment about "vendor
specific" registers. Two registers are mentioned. They are not
initialized there in the firmware because they are AHCI related, while
the firmware at this location does only PHY configuration. The
solution to avoid doing such initialization is relying on U-Boot.
While this work at boot time, U-Boot is definitely not going to run
during a resume after suspending to RAM.
Two possible solutions were considered:
* Fixing the firmware.
* Fixing the kernel driver.
The first solution would take ages to propagate, while the second
solution is easy to implement as the driver as been a little bit
reworked to prepare for such platform configuration. Hence, this patch
adds an Armada 3700 configuration function to set these two registers
both at boot time (in the probe) and after a suspend (in the resume
path).
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
At the beginning, only Armada 38x SoCs where supported by the
ahci_mvebu.c driver. Commit 15d3ce7b63 ("ata: ahci_mvebu: add
support for Armada 3700 variant") introduced Armada 3700 support. As
opposed to Armada 38x SoCs, the 3700 variants do not have to configure
mbus and the regret option. This patch took care of avoiding such
configuration when not needed in the probe function, but failed to do
the same in the resume path. While doing so looks harmless by
experience, let's clean the driver logic and avoid doing this useless
configuration with Armada 3700 SoCs.
Because the logic is very similar between these two places, it has
been decided to factorize this code and put it in a "Armada 38x
configuration function". This function is part of a new
(per-compatible) platform data structure, so that the addition of such
configuration function for Armada 3700 will be eased.
Fixes: 15d3ce7b63 ("ata: ahci_mvebu: add support for Armada 3700 variant")
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
For Armada-38x (32-bit) SoCs, PM platform support has been added since:
commit 32f9494c9d ("ARM: mvebu: prepare pm-board.c for the
introduction of Armada 38x support")
commit 3cbd6a6ca8 ("ARM: mvebu: Add standby support")
For Armada 64-bit SoCs, like the A3700 also using this AHCI driver, PM
platform support has always existed.
There are even suspend/resume hooks in this driver since:
commit d6ecf15814 ("ata: ahci_mvebu: add suspend/resume support")
Remove the stale comment at the end of this driver stating that all
the above does not exist yet.
Fixes: d6ecf15814 ("ata: ahci_mvebu: add suspend/resume support")
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Current implementation of the libahci does not take into account the
new PHY framework. Correct the situation by adding a call to
phy_set_mode() before phy_power_on().
PHYs should also be handled at suspend/resume time. For this, call
ahci_platform_enable/disable_phys() at suspend/resume_host() time. These
calls are guarded by a HFLAG (AHCI_HFLAG_SUSPEND_PHYS) that the user of
the libahci driver must set manually in hpriv->flags at probe time. This
is to avoid breaking users that have not been tested with this change.
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Suggested-by: Grzegorz Jaszczyk <jaz@semihalf.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Allocatable devices can be acquired by drivers on the fsl-mc bus using
the fsl_mc_portal_allocate or fsl_mc_object_allocate functions. Add a
device link between the consumer device and the supplier device so that
proper resource management is achieved.
Also, adding a link between these devices ensures that a proper unbind
order is respected (ie before the supplier device is unbound from its
respective driver all consumer devices will be notified and unbound
first).
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Reviewed-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
In all QBMan registers, the buffer pool id field is two bytes long.
The low level qbman APIs reflect this, but the high level DPIO ones
use u32. Modify them in order to avoid implicit downcasts.
Signed-off-by: Ioana Radulescu <ruxandra.radulescu@nxp.com>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
Automatically add a device link between the actual device requesting the
dpaa2_io_service_register and the underlying dpaa2_io used. This link
will ensure that when a DPIO device, which is indirectly used by other
devices, is unbound any consumer devices will be also unbound from their
drivers.
For example, any DPNI, bound to the dpaa2-eth driver, which is using
DPIO devices will be unbound before its supplier device.
Also, add a new parameter to the dpaa2_io_service_[de]register functions
to specify the requesting device (ie the consumer).
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Reviewed-by: Horia Geanta <horia.geanta@nxp.com>
Reviewed-by: Ioana Radulescu <ruxandra.radulescu@nxp.com>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
In dpaa2_io_store_next(), if the current dequeue entry is not
the last, prefetch the next one as most likely it will be
requested shortly by the consumer driver.
This brings a ~3% improvement for dpaa2 ethernet driver
IP forwarding with small size frames.
Signed-off-by: Ioana Radulescu <ruxandra.radulescu@nxp.com>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
Add a new field in the dpaa2_io structure to hold a backpointer to the
actual DPIO device.
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
At the moment, the dpio-driver allocates an MC portal at probe time and
frees it right after usage. The same thing happens on the remove path.
This behavior could lead to scenarios where an MC portal is available
for use at probing but not longer free on the remove path which could
lead to unproper unbind of resources.
Change the driver's behavior in such a way that an MC portal is
allocated at probe and kept until the DPIO device is removed. This will
ensure that at any time after a DPIO device was successfully probed, all
its dependencies will be met.
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
Invoke a DPIO reset command when a DPIO device is probed. This
will ensure the QBMan portal is in the state the driver expects.
Signed-off-by: Roy Pledge <roy.pledge@nxp.com>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
Daniel Borkmann says:
====================
pull-request: bpf 2019-01-11
The following pull-request contains BPF updates for your *net* tree.
The main changes are:
1) Fix TCP-BPF support for correctly setting the initial window
via TCP_BPF_IW on an active TFO sender, from Yuchung.
2) Fix a panic in BPF's stack_map_get_build_id()'s ELF parsing on
32 bit archs caused by page_address() returning NULL, from Song.
3) Fix BTF pretty print in kernel and bpftool when bitfield member
offset is greater than 256. Also add test cases, from Yonghong.
4) Fix improper argument handling in xdp1 sample, from Ioana.
5) Install missing tcp_server.py and tcp_client.py files from
BPF selftests, from Anders.
6) Add test_libbpf to gitignore in libbpf and BPF selftests,
from Stanislav.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull i2c fixes from Wolfram Sang:
"I2C has one core and one driver bugfix for you"
* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: tegra: Fix Maximum transfer size
i2c: dev: prevent adapter retries and timeout being set as minus value
- Don't error in kexec_file_load if kaslr-seed is missing in device-tree
- Fix incorrect argument type passed to iort_match_node_callback()
- Fix IORT build failure when CONFIG_IOMMU_API=n
- Fix kpti performance regression with new rodata default option
- Typo fix
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEPxTL6PPUbjXGY88ct6xw3ITBYzQFAlw4mMwACgkQt6xw3ITB
YzSPoAf8Ci2O+LAhPHKgbGRCPuM3TCl69zYKD0I3OHbLXOpGk0ykWvYxOPkCHipr
DpilFzWXyr0bUjg8GtsUAFlfPuzSCj/UpreRIN6o0+AEHZ5t1RTqxfRaSah5V7Df
mDMlvPw8qS05ieIPwz0AOrR/ZxODqWeu9GaiWRbSx2ZH9/e2YL1dnHfcZ+77CsWZ
Wdb99aVT5UcLbPmAtj/0hs+o6NekjwGt70JCBytXP6lJM/Hh7SeNNjJPNnKvisag
GYHg/Vn5uA37/80iLkXq5J/pu1mrDqEZO1/KfZcmQ1umnCm2CLJNKDoJc3kGLVhT
wZYv8TLY0i42fJ2m03yp8v8lKf/29w==
=9NUe
-----END PGP SIGNATURE-----
Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Will Deacon:
"Another handful of arm64 fixes here. Most of the complication comes
from improving our kpti code to avoid lengthy pauses (30+ seconds)
during boot when we rewrite the page tables. There are also a couple
of IORT fixes that came in via Lorenzo.
Summary:
- Don't error in kexec_file_load if kaslr-seed is missing in
device-tree
- Fix incorrect argument type passed to iort_match_node_callback()
- Fix IORT build failure when CONFIG_IOMMU_API=n
- Fix kpti performance regression with new rodata default option
- Typo fix"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: kexec_file: return successfully even if kaslr-seed doesn't exist
ACPI/IORT: Fix rc_dma_get_range()
arm64: kpti: Avoid rewriting early page tables when KASLR is enabled
arm64: asm-prototypes: Fix fat-fingered typo in comment
ACPI/IORT: Fix build when CONFIG_IOMMU_API=n
edge case, marked for stable.
-----BEGIN PGP SIGNATURE-----
iQFHBAABCAAxFiEEydHwtzie9C7TfviiSn/eOAIR84sFAlw4yfETHGlkcnlvbW92
QGdtYWlsLmNvbQAKCRBKf944AhHzi9loB/4iTBs/c5vI8oXSi+n4IAAG/LunP8Ff
HfxMr7Mpbpp0cLdzmJWO63Wejii95w7IkdepJTF5VlpH6dwJDUL6jSAyAXPO1a2G
phZHmnGYjFBKLGPftCZmGQCJeYeS9JJyRgTC4IZECVkQRiPRGXn8cAbEqMYOy6Am
mXmy0u4Me3RJTpcOCqaPPugontvtsZdfqvwVE2dGqXTj9Kh1hfum5ddrvf1CXugQ
MpXzW3mJCMMfcXlZOCVuQInKqPT4HRhTpzJxdECiJTxBXDQUd6e0ekOXmKW6jOYk
ZpNVnXHGee0uvzwQC0/VMWkRF6d+pOsYFQkDlX79h04rqnoBkUNc2Doe
=dJev
-----END PGP SIGNATURE-----
Merge tag 'ceph-for-5.0-rc2' of git://github.com/ceph/ceph-client
Pull ceph updates from Ilya Dryomov:
"A patch to allow setting abort_on_full and a fix for an old "rbd
unmap" edge case, marked for stable"
* tag 'ceph-for-5.0-rc2' of git://github.com/ceph/ceph-client:
rbd: don't return 0 on unmap if RBD_DEV_FLAG_REMOVING is set
ceph: use vmf_error() in ceph_filemap_fault()
libceph: allow setting abort_on_full for rbd
Add a few livepatch modules and simple target modules that the included
regression suite can run tests against:
- basic livepatching (multiple patches, atomic replace)
- pre/post (un)patch callbacks
- shadow variable API
Signed-off-by: Joe Lawrence <joe.lawrence@redhat.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Tested-by: Miroslav Benes <mbenes@suse.cz>
Tested-by: Alice Ferrazzi <alice.ferrazzi@gmail.com>
Acked-by: Joe Lawrence <joe.lawrence@redhat.com>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The atomic replace and cumulative patches were introduced as a more secure
way to handle dependent patches. They simplify the logic:
+ Any new cumulative patch is supposed to take over shadow variables
and changes made by callbacks from previous livepatches.
+ All replaced patches are discarded and the modules can be unloaded.
As a result, there is only one scenario when a cumulative livepatch
gets disabled.
The different handling of "normal" and cumulative patches might cause
confusion. It would make sense to keep only one mode. On the other hand,
it would be rude to enforce using the cumulative livepatches even for
trivial and independent (hot) fixes.
However, the stack of patches is not really necessary any longer.
The patch ordering was never clearly visible via the sysfs interface.
Also the "normal" patches need a lot of caution anyway.
Note that the list of enabled patches is still necessary but the ordering
is not longer enforced.
Otherwise, the code is ready to disable livepatches in an random order.
Namely, klp_check_stack_func() always looks for the function from
the livepatch that is being disabled. klp_func structures are just
removed from the related func_stack. Finally, the ftrace handlers
is removed only when the func_stack becomes empty.
Signed-off-by: Petr Mladek <pmladek@suse.com>
Acked-by: Miroslav Benes <mbenes@suse.cz>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
User documentation for the atomic replace feature. It makes it easier
to maintain livepatches using so-called cumulative patches.
Signed-off-by: Petr Mladek <pmladek@suse.com>
Acked-by: Miroslav Benes <mbenes@suse.cz>
Acked-by: Joe Lawrence <joe.lawrence@redhat.com>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Replaced patches are removed from the stack when the transition is
finished. It means that Nop structures will never be needed again
and can be removed. Why should we care?
+ Nop structures give the impression that the function is patched
even though the ftrace handler has no effect.
+ Ftrace handlers do not come for free. They cause slowdown that might
be visible in some workloads. The ftrace-related slowdown might
actually be the reason why the function is no longer patched in
the new cumulative patch. One would expect that cumulative patch
would help solve these problems as well.
+ Cumulative patches are supposed to replace any earlier version of
the patch. The amount of NOPs depends on which version was replaced.
This multiplies the amount of scenarios that might happen.
One might say that NOPs are innocent. But there are even optimized
NOP instructions for different processors, for example, see
arch/x86/kernel/alternative.c. And klp_ftrace_handler() is much
more complicated.
+ It sounds natural to clean up a mess that is no longer needed.
It could only be worse if we do not do it.
This patch allows to unpatch and free the dynamic structures independently
when the transition finishes.
The free part is a bit tricky because kobject free callbacks are called
asynchronously. We could not wait for them easily. Fortunately, we do
not have to. Any further access can be avoided by removing them from
the dynamic lists.
Signed-off-by: Petr Mladek <pmladek@suse.com>
Acked-by: Miroslav Benes <mbenes@suse.cz>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Sometimes we would like to revert a particular fix. Currently, this
is not easy because we want to keep all other fixes active and we
could revert only the last applied patch.
One solution would be to apply new patch that implemented all
the reverted functions like in the original code. It would work
as expected but there will be unnecessary redirections. In addition,
it would also require knowing which functions need to be reverted at
build time.
Another problem is when there are many patches that touch the same
functions. There might be dependencies between patches that are
not enforced on the kernel side. Also it might be pretty hard to
actually prepare the patch and ensure compatibility with the other
patches.
Atomic replace && cumulative patches:
A better solution would be to create cumulative patch and say that
it replaces all older ones.
This patch adds a new "replace" flag to struct klp_patch. When it is
enabled, a set of 'nop' klp_func will be dynamically created for all
functions that are already being patched but that will no longer be
modified by the new patch. They are used as a new target during
the patch transition.
The idea is to handle Nops' structures like the static ones. When
the dynamic structures are allocated, we initialize all values that
are normally statically defined.
The only exception is "new_func" in struct klp_func. It has to point
to the original function and the address is known only when the object
(module) is loaded. Note that we really need to set it. The address is
used, for example, in klp_check_stack_func().
Nevertheless we still need to distinguish the dynamically allocated
structures in some operations. For this, we add "nop" flag into
struct klp_func and "dynamic" flag into struct klp_object. They
need special handling in the following situations:
+ The structures are added into the lists of objects and functions
immediately. In fact, the lists were created for this purpose.
+ The address of the original function is known only when the patched
object (module) is loaded. Therefore it is copied later in
klp_init_object_loaded().
+ The ftrace handler must not set PC to func->new_func. It would cause
infinite loop because the address points back to the beginning of
the original function.
+ The various free() functions must free the structure itself.
Note that other ways to detect the dynamic structures are not considered
safe. For example, even the statically defined struct klp_object might
include empty funcs array. It might be there just to run some callbacks.
Also note that the safe iterator must be used in the free() functions.
Otherwise already freed structures might get accessed.
Special callbacks handling:
The callbacks from the replaced patches are _not_ called by intention.
It would be pretty hard to define a reasonable semantic and implement it.
It might even be counter-productive. The new patch is cumulative. It is
supposed to include most of the changes from older patches. In most cases,
it will not want to call pre_unpatch() post_unpatch() callbacks from
the replaced patches. It would disable/break things for no good reasons.
Also it should be easier to handle various scenarios in a single script
in the new patch than think about interactions caused by running many
scripts from older patches. Not to say that the old scripts even would
not expect to be called in this situation.
Removing replaced patches:
One nice effect of the cumulative patches is that the code from the
older patches is no longer used. Therefore the replaced patches can
be removed. It has several advantages:
+ Nops' structs will no longer be necessary and might be removed.
This would save memory, restore performance (no ftrace handler),
allow clear view on what is really patched.
+ Disabling the patch will cause using the original code everywhere.
Therefore the livepatch callbacks could handle only one scenario.
Note that the complication is already complex enough when the patch
gets enabled. It is currently solved by calling callbacks only from
the new cumulative patch.
+ The state is clean in both the sysfs interface and lsmod. The modules
with the replaced livepatches might even get removed from the system.
Some people actually expected this behavior from the beginning. After all
a cumulative patch is supposed to "completely" replace an existing one.
It is like when a new version of an application replaces an older one.
This patch does the first step. It removes the replaced patches from
the list of patches. It is safe. The consistency model ensures that
they are no longer used. By other words, each process works only with
the structures from klp_transition_patch.
The removal is done by a special function. It combines actions done by
__disable_patch() and klp_complete_transition(). But it is a fast
track without all the transaction-related stuff.
Signed-off-by: Jason Baron <jbaron@akamai.com>
[pmladek@suse.com: Split, reuse existing code, simplified]
Signed-off-by: Petr Mladek <pmladek@suse.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Jessica Yu <jeyu@kernel.org>
Cc: Jiri Kosina <jikos@kernel.org>
Cc: Miroslav Benes <mbenes@suse.cz>
Acked-by: Miroslav Benes <mbenes@suse.cz>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Currently klp_patch contains a pointer to a statically allocated array of
struct klp_object and struct klp_objects contains a pointer to a statically
allocated array of klp_func. In order to allow for the dynamic allocation
of objects and functions, link klp_patch, klp_object, and klp_func together
via linked lists. This allows us to more easily allocate new objects and
functions, while having the iterator be a simple linked list walk.
The static structures are added to the lists early. It allows to add
the dynamically allocated objects before klp_init_object() and
klp_init_func() calls. Therefore it reduces the further changes
to the code.
This patch does not change the existing behavior.
Signed-off-by: Jason Baron <jbaron@akamai.com>
[pmladek@suse.com: Initialize lists before init calls]
Signed-off-by: Petr Mladek <pmladek@suse.com>
Acked-by: Miroslav Benes <mbenes@suse.cz>
Acked-by: Joe Lawrence <joe.lawrence@redhat.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Jiri Kosina <jikos@kernel.org>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The possibility to re-enable a registered patch was useful for immediate
patches where the livepatch module had to stay until the system reboot.
The improved consistency model allows to achieve the same result by
unloading and loading the livepatch module again.
Also we are going to add a feature called atomic replace. It will allow
to create a patch that would replace all already registered patches.
The aim is to handle dependent patches more securely. It will obsolete
the stack of patches that helped to handle the dependencies so far.
Then it might be unclear when a cumulative patch re-enabling is safe.
It would be complicated to support the many modes. Instead we could
actually make the API and code easier to understand.
Therefore, remove the two step public API. All the checks and init calls
are moved from klp_register_patch() to klp_enabled_patch(). Also the patch
is automatically freed, including the sysfs interface when the transition
to the disabled state is completed.
As a result, there is never a disabled patch on the top of the stack.
Therefore we do not need to check the stack in __klp_enable_patch().
And we could simplify the check in __klp_disable_patch().
Also the API and logic is much easier. It is enough to call
klp_enable_patch() in module_init() call. The patch can be disabled
by writing '0' into /sys/kernel/livepatch/<patch>/enabled. Then the module
can be removed once the transition finishes and sysfs interface is freed.
The only problem is how to free the structures and kobjects safely.
The operation is triggered from the sysfs interface. We could not put
the related kobject from there because it would cause lock inversion
between klp_mutex and kernfs locks, see kn->count lockdep map.
Therefore, offload the free task to a workqueue. It is perfectly fine:
+ The patch can no longer be used in the livepatch operations.
+ The module could not be removed until the free operation finishes
and module_put() is called.
+ The operation is asynchronous already when the first
klp_try_complete_transition() fails and another call
is queued with a delay.
Suggested-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Acked-by: Miroslav Benes <mbenes@suse.cz>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
module_put() is currently never called in klp_complete_transition() when
klp_force is set. As a result, we might keep the reference count even when
klp_enable_patch() fails and klp_cancel_transition() is called.
This might give the impression that a module might get blocked in some
strange init state. Fortunately, it is not the case. The reference count
is ignored when mod->init fails and erroneous modules are always removed.
Anyway, this might be confusing. Instead, this patch moves
the global klp_forced flag into struct klp_patch. As a result,
we block only modules that might still be in use after a forced
transition. Newly loaded livepatches might be eventually completely
removed later.
It is not a big deal. But the code is at least consistent with
the reality.
Signed-off-by: Petr Mladek <pmladek@suse.com>
Acked-by: Joe Lawrence <joe.lawrence@redhat.com>
Acked-by: Miroslav Benes <mbenes@suse.cz>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The code for freeing livepatch structures is a bit scattered and tricky:
+ direct calls to klp_free_*_limited() and kobject_put() are
used to release partially initialized objects
+ klp_free_patch() removes the patch from the public list
and releases all objects except for patch->kobj
+ object_put(&patch->kobj) and the related wait_for_completion()
are called directly outside klp_mutex; this code is duplicated;
Now, we are going to remove the registration stage to simplify the API
and the code. This would require handling more situations in
klp_enable_patch() error paths.
More importantly, we are going to add a feature called atomic replace.
It will need to dynamically create func and object structures. We will
want to reuse the existing init() and free() functions. This would
create even more error path scenarios.
This patch implements more straightforward free functions:
+ checks kobj_added flag instead of @limit[*]
+ initializes patch->list early so that the check for empty list
always works
+ The action(s) that has to be done outside klp_mutex are done
in separate klp_free_patch_finish() function. It waits only
when patch->kobj was really released via the _start() part.
The patch does not change the existing behavior.
[*] We need our own flag to track that the kobject was successfully
added to the hierarchy. Note that kobj.state_initialized only
indicates that kobject has been initialized, not whether is has
been added (and needs to be removed on cleanup).
Signed-off-by: Petr Mladek <pmladek@suse.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Miroslav Benes <mbenes@suse.cz>
Cc: Jessica Yu <jeyu@kernel.org>
Cc: Jiri Kosina <jikos@kernel.org>
Cc: Jason Baron <jbaron@akamai.com>
Acked-by: Miroslav Benes <mbenes@suse.cz>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
We are going to simplify the API and code by removing the registration
step. This would require calling init/free functions from enable/disable
ones.
This patch just moves the code to prevent more forward declarations.
This patch does not change the code except for two forward declarations.
Signed-off-by: Petr Mladek <pmladek@suse.com>
Acked-by: Miroslav Benes <mbenes@suse.cz>
Acked-by: Joe Lawrence <joe.lawrence@redhat.com>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The address of the to be patched function and new function is stored
in struct klp_func as:
void *new_func;
unsigned long old_addr;
The different naming scheme and type are derived from the way
the addresses are set. @old_addr is assigned at runtime using
kallsyms-based search. @new_func is statically initialized,
for example:
static struct klp_func funcs[] = {
{
.old_name = "cmdline_proc_show",
.new_func = livepatch_cmdline_proc_show,
}, { }
};
This patch changes unsigned long old_addr -> void *old_func. It removes
some confusion when these address are later used in the code. It is
motivated by a followup patch that adds special NOP struct klp_func
where we want to assign func->new_func = func->old_addr respectively
func->new_func = func->old_func.
This patch does not modify the existing behavior.
Suggested-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Acked-by: Miroslav Benes <mbenes@suse.cz>
Acked-by: Joe Lawrence <joe.lawrence@redhat.com>
Acked-by: Alice Ferrazzi <alice.ferrazzi@gmail.com>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
While reading through the sysvipc implementation, I noticed that the n32
semctl/shmctl/msgctl system calls behave differently based on whether
o32 support is enabled or not: Without o32, the IPC_64 flag passed by
user space is rejected but calls without that flag get IPC_64 behavior.
As far as I can tell, this was inadvertently changed by a cleanup patch
but never noticed by anyone, possibly nobody has tried using sysvipc
on n32 after linux-3.19.
Change it back to the old behavior now.
Fixes: 78aaf956ba ("MIPS: Compat: Fix build error if CONFIG_MIPS32_COMPAT but no compat ABI.")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: linux-mips@vger.kernel.org
Cc: stable@vger.kernel.org # 3.19+
The NHK15 panel is specified inside the display controller,
which works for the DPI-type DT parsing the old fbdev code
used, but for the DRM driver it needs to be spawn as its own
device, so we move it out of the display controller.
We also drop the panel timings: this should be determined
by the hardware or a device-specific compatible string, not
by this type of encoding into the device tree. It turns out
that this hardware is strapped to the right configuration
at boot already and we the driver just reads out the
hardware-specified resolution and timings. Drop the
"panel,dpi" compatible string altogether.
Fix a comment error in the DTS file while we're at it.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The TPO (Toppoly) TPG110 is a pretty generic display driver
similar in vein to the Ilitek 93xx devices. It is not a panel
per se but a driver used with several low-cost noname panels.
This is used on the Nomadik NHK15 combined with a OSD
OSD057VA01CT display for WVGA 800x480.
The driver is pretty minimalistic right now but can be
extended to handle non-default polarities, gamma correction
etc.
The driver is based on the baked-in code in
drivers/video/fbdev/amba-clcd-nomadik.c which will be
decomissioned once this us upstream.
Cc: Noralf Trønnes <noralf@tronnes.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Noralf Trønnes <noralf@tronnes.org>
Acked-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190111175406.27646-1-linus.walleij@linaro.org
If QCOM_GDSC is disabled, gdsc_register() returns -ENOSYS, which causes
gcc_msm8998_probe() to fail. Select QCOM_GDSC to solve the problem.
gcc-msm8998: probe of 100000.clock-controller failed with error -38
Signed-off-by: Marc Gonzalez <marc.w.gonzalez@free.fr>
Fixes: b5f5f525c5 ("clk: qcom: Add MSM8998 Global Clock Control (GCC) driver")
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
After commit
5d32a66541 ("PCI/ACPI: Allow ACPI to be built without CONFIG_PCI set")
dependencies on CONFIG_PCI that previously were satisfied implicitly
through dependencies on CONFIG_ACPI have to be specified directly. LPSS
code relies on PCI infrastructure but this dependency has not been
explicitly called out so do that.
Fixes: 5d32a66541 ("PCI/ACPI: Allow ACPI to be built without CONFIG_PCI set")
Signed-off-by: Sinan Kaya <okaya@kernel.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: linux-acpi@vger.kernel.org
Cc: x86-ml <x86@kernel.org>
Link: https://lkml.kernel.org/r/20190102181038.4418-11-okaya@kernel.org
AFBC is a flexible, proprietary, lossless compression protocol and
format, with a number of defined DRM format modifiers. To facilitate
consistency and compatibility between different AFBC producers and
consumers, document the expectations for usage of the AFBC DRM format
modifiers in a new .rst chapter.
Signed-off-by: Brian Starkey <brian.starkey@arm.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
[Updated MAINTAINERS entry to show that "Mali DP Maintainers" is
actually a mailing list and added an SPDX-License-Identifier to
the documentation]
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
Pull perf tooling updates from Ingo Molnar:
"Tooling changes only: fixes and a few stray improvements.
Most of the diffstat is dominated by a PowerPC related fix of system
call trace output beautification that allows us to (again) use the
UAPI header version and sync up with the kernel's version of PowerPC
system call names in the arch/powerpc/kernel/syscalls/syscall.tbl
header"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (36 commits)
tools headers powerpc: Remove unistd.h
perf powerpc: Rework syscall table generation
perf symbols: Add 'arch_cpu_idle' to the list of kernel idle symbols
tools include uapi: Sync linux/if_link.h copy with the kernel sources
tools include uapi: Sync linux/vhost.h with the kernel sources
tools include uapi: Sync linux/fs.h copy with the kernel sources
perf beauty: Switch from using uapi/linux/fs.h to uapi/linux/mount.h
tools include uapi: Grab a copy of linux/mount.h
perf top: Lift restriction on using callchains without "sym" in --sort
tools lib traceevent: Remove tep_data_event_from_type() API
tools lib traceevent: Rename tep_is_file_bigendian() to tep_file_bigendian()
tools lib traceevent: Changed return logic of tep_register_event_handler() API
tools lib traceevent: Changed return logic of trace_seq_printf() and trace_seq_vprintf() APIs
tools lib traceevent: Rename struct cmdline to struct tep_cmdline
tools lib traceevent: Initialize host_bigendian at tep_handle allocation
tools lib traceevent: Introduce new libtracevent API: tep_override_comm()
perf tests: Add a test for the ARM 32-bit [vectors] page
perf tools: Make find_vdso_map() more modular
perf trace: Fix alignment for [continued] lines
perf trace: Fix ')' placement in "interrupted" syscall lines
...
Since commit 09abb5e3e5 ("KVM: nVMX: call kvm_skip_emulated_instruction
in nested_vmx_{fail,succeed}") nested_vmx_failValid() results in
kvm_skip_emulated_instruction() so doing it again in handle_vmptrld() when
vmptr address is not backed is wrong, we end up advancing RIP twice.
Fixes: fca91f6d60 ("kvm: nVMX: Set VM instruction error for VMPTRLD of unbacked page")
Reported-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: Sean Christopherson <sean.j.christopherson@intel.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
The URL of [api-spec] in Documentation/virtual/kvm/amd-memory-encryption.rst
is no longer valid, replaced space with underscore.
Signed-off-by: Christophe de Dinechin <dinechin@redhat.com>
Reviewed-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
The "ret" is initialized to be ENOTSUPP. The return value of
__hv_remote_flush_tlb_with_range() will be Or with "ret" when ept
table potiners are mismatched. This will cause return ENOTSUPP even if
flush tlb successfully. This patch is to fix the issue and set
"ret" to 0.
Fixes: a5c214dad1 ("KVM/VMX: Change hv flush logic when ept tables are mismatched.")
Signed-off-by: Lan Tianyu <Tianyu.Lan@microsoft.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
By code inspection, it was found that multiple calls to KVM_SEV_INIT
could deplete asid bits and overwrite kvm_sev_info's regions_list.
Multiple calls to KVM_SVM_INIT is not likely to occur with QEMU, but this
should likely be fixed anyway.
This code is serialized by kvm->lock.
Fixes: 1654efcbc4 ("KVM: SVM: Add KVM_SEV_INIT command")
Reported-by: Cfir Cohen <cfir@google.com>
Signed-off-by: David Rientjes <rientjes@google.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
The function at issue does not fully validate the content of the
structure pointed by the log parameter, though its content has just been
copied from userspace and lacks validation. Fix that.
Moreover, change the type of n to unsigned long as that is the type
returned by kvm_dirty_bitmap_bytes().
Signed-off-by: Tomas Bortoli <tomasbortoli@gmail.com>
Reported-by: syzbot+028366e52c9ace67deb3@syzkaller.appspotmail.com
[Squashed the fix from Paolo. - Radim.]
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
ctl_bitmask in pt_desc is of type u64. When an integer like 0xf is
being left shifted more than 32 bits, the behavior is undefined.
Fix this by adding suffix ULL to integer 0xf.
Addresses-Coverity-ID: 1476095 ("Bad bit shift operation")
Fixes: 6c0f0bba85 ("KVM: x86: Introduce a function to initialize the PT configuration")
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Reviewed-by: Wei Yang <richardw.yang@linux.intel.com>
Reviewed-by: Luwei Kang <luwei.kang@intel.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Pull x86 fixes from Ingo Molnar:
"A 32-bit build fix, CONFIG_RETPOLINE fixes and rename CONFIG_RESCTRL
to CONFIG_X86_RESCTRL"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86, modpost: Replace last remnants of RETPOLINE with CONFIG_RETPOLINE
x86/cache: Rename config option to CONFIG_X86_RESCTRL
samples/seccomp: Fix 32-bit build
- Fix build failures with both CONFIG_NLS and CONFIG_PCI unset that
can occur since ACPI can be built without PCI now (Sinan Kaya).
- Clean up the handling of duplicate entries in power resource lists
returned by _PRx evaluation to avoid triggering WARN_ON() on
attempts to add duplicate symlinks in sysfs (Hans de Goede).
- Fix issues with the TS current-source switching on systems using
the xpower PMIC by avoiding to update unrelated bits in the TS
pin-ctrl register and avoiding to unconditionally enable TS
current-source on systems where it is not used (Hans de Goede).
- Fix addresses in NUMA-related messages on 32-bit with PAE which
can be truncated due to integer type conversions (Chao Fan).
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=83Yo
-----END PGP SIGNATURE-----
Merge tag 'acpi-5.0-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fixes from Rafael Wysocki:
"Fix a build failure introduced recently, fix the xpower PMIC ACPI
driver, clean up the handling of duplicate entries in _PRx power
resource lists and fix addresses in NUMA-related messages on 32-bit
with PAE.
Specifics:
- Fix build failures with both CONFIG_NLS and CONFIG_PCI unset that
can occur since ACPI can be built without PCI now (Sinan Kaya).
- Clean up the handling of duplicate entries in power resource lists
returned by _PRx evaluation to avoid triggering WARN_ON() on
attempts to add duplicate symlinks in sysfs (Hans de Goede).
- Fix issues with the TS current-source switching on systems using
the xpower PMIC by avoiding to update unrelated bits in the TS
pin-ctrl register and avoiding to unconditionally enable TS
current-source on systems where it is not used (Hans de Goede).
- Fix addresses in NUMA-related messages on 32-bit with PAE which can
be truncated due to integer type conversions (Chao Fan)"
* tag 'acpi-5.0-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI / PMIC: xpower: Fix TS-pin current-source handling
ACPI: NUMA: Use correct type for printing addresses on i386-PAE
ACPI: power: Skip duplicate power resource references in _PRx
ACPI: Fix build failure when CONFIG_NLS is set to 'n'
- Prevent integer overflows from occurring on 32-bit when
converting milliseconds to nanoseconds in the runtime PM
framework and update comments that still refer to jiffies
in it (Vincent Guittot, Ladislav Michl).
- Fix the SCMI cpufreq driver to always use the same frequency
units for arch_set_freq_scale() and make the scale-invariant
load tracking acutally work with this driver (Quentin Perret).
- Fix freeing of dynamic OPPs in the SCPI and SCMI cpufreq drivers
broken during the 4.20 defelopment cycle (Viresh Kumar).
- Prevent the cpufreq core from attempting to return the current
frequency of offline CPUs (Sudeep Holla).
- Add devfreq suspend and resume hooks (missed previously) to the
PM core to make the recently added system suspend and resume
support in devfreq actually work (Lukasz Luba).
- Update MAINTAINERS entries for cpufreq and cpuidle, mostly to add
references to new/current documentation to them (Rafael Wysocki).
- Fix a recently broken reference to cpuidle documentation (Otto
Sabart).
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=Z7S7
-----END PGP SIGNATURE-----
Merge tag 'pm-5.0-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management updates from Rafael Wysocki:
"These fix fallout after starting to use hrtimers in the runtime PM
framework, fix a few cpufreq issues, fix a recently broken reference
to cpuidle documentation, update MAINTAINERS entries for cpufreq and
cpuidle and make the recently added system suspend and resume support
in devfreq actually work.
Specifics:
- Prevent integer overflows from occurring on 32-bit when converting
milliseconds to nanoseconds in the runtime PM framework and update
comments that still refer to jiffies in it (Vincent Guittot,
Ladislav Michl).
- Fix the SCMI cpufreq driver to always use the same frequency units
for arch_set_freq_scale() and make the scale-invariant load
tracking acutally work with this driver (Quentin Perret).
- Fix freeing of dynamic OPPs in the SCPI and SCMI cpufreq drivers
broken during the 4.20 defelopment cycle (Viresh Kumar).
- Prevent the cpufreq core from attempting to return the current
frequency of offline CPUs (Sudeep Holla).
- Add devfreq suspend and resume hooks (missed previously) to the PM
core to make the recently added system suspend and resume support
in devfreq actually work (Lukasz Luba).
- Update MAINTAINERS entries for cpufreq and cpuidle, mostly to add
references to new/current documentation to them (Rafael Wysocki).
- Fix a recently broken reference to cpuidle documentation (Otto
Sabart)"
* tag 'pm-5.0-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
PM-runtime: Fix autosuspend_delay on 32bits arch
PM-runtime: Fix 'jiffies' in comments after switch to hrtimers
cpufreq: scmi: Fix frequency invariance in slow path
doc: trace: fix reference to cpuidle documentation file
cpufreq: check if policy is inactive early in __cpufreq_get()
cpufreq: scpi/scmi: Fix freeing of dynamic OPPs
cpuidle / Documentation: Update cpuidle MAINTAINERS entry
cpufreq / Documentation: Update cpufreq MAINTAINERS entry
PM: sleep: call devfreq suspend/resume
