coccicheck currently warns of the following issues in the driver:
drivers/crypto/hisilicon/sec/sec_algs.c:864:51-66: ERROR: reference preceded by free on line 812
drivers/crypto/hisilicon/sec/sec_algs.c:864:40-49: ERROR: reference preceded by free on line 813
drivers/crypto/hisilicon/sec/sec_algs.c:861:8-24: ERROR: reference preceded by free on line 814
drivers/crypto/hisilicon/sec/sec_algs.c:860:41-51: ERROR: reference preceded by free on line 815
drivers/crypto/hisilicon/sec/sec_algs.c:867:7-18: ERROR: reference preceded by free on line 816
It would appear than on certain error paths that we may attempt reference-
after-free some memories.
This patch fixes those issues. The solution doesn't look perfect, but
having same memories free'd possibly from separate functions makes it
tricky.
Fixes: 915e4e8413 ("crypto: hisilicon - SEC security accelerator driver")
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Clang warns when one enumerated type is implicitly converted to another:
drivers/pinctrl/pinctrl-zynq.c:985:18: warning: implicit conversion from
enumeration type 'enum zynq_pin_config_param' to different enumeration
type 'enum pin_config_param' [-Wenum-conversion]
{"io-standard", PIN_CONFIG_IOSTANDARD, zynq_iostd_lvcmos18},
~ ^~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/pinctrl-zynq.c:990:16: warning: implicit conversion from
enumeration type 'enum zynq_pin_config_param' to different enumeration
type 'enum pin_config_param' [-Wenum-conversion]
= { PCONFDUMP(PIN_CONFIG_IOSTANDARD, "IO-standard", NULL, true),
~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
./include/linux/pinctrl/pinconf-generic.h:163:11: note: expanded from
macro 'PCONFDUMP'
.param = a, .display = b, .format = c, .has_arg = d \
^
2 warnings generated.
It is expected that pinctrl drivers can extend pin_config_param because
of the gap between PIN_CONFIG_END and PIN_CONFIG_MAX so this conversion
isn't an issue. Most drivers that take advantage of this define the
PIN_CONFIG variables as constants, rather than enumerated values. Do the
same thing here so that Clang no longer warns.
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Acked-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Clang warns when one enumerated type is implicitly converted to another:
drivers/pinctrl/pinctrl-lpc18xx.c:643:29: warning: implicit conversion
from enumeration type 'enum lpc18xx_pin_config_param' to different
enumeration type 'enum pin_config_param' [-Wenum-conversion]
{"nxp,gpio-pin-interrupt", PIN_CONFIG_GPIO_PIN_INT, 0},
~ ^~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/pinctrl-lpc18xx.c:648:12: warning: implicit conversion
from enumeration type 'enum lpc18xx_pin_config_param' to different
enumeration type 'enum pin_config_param' [-Wenum-conversion]
PCONFDUMP(PIN_CONFIG_GPIO_PIN_INT, "gpio pin int", NULL, true),
~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
./include/linux/pinctrl/pinconf-generic.h:163:11: note: expanded from
macro 'PCONFDUMP'
.param = a, .display = b, .format = c, .has_arg = d \
^
2 warnings generated.
It is expected that pinctrl drivers can extend pin_config_param because
of the gap between PIN_CONFIG_END and PIN_CONFIG_MAX so this conversion
isn't an issue. Most drivers that take advantage of this define the
PIN_CONFIG variables as constants, rather than enumerated values. Do the
same thing here so that Clang no longer warns.
Link: https://github.com/ClangBuiltLinux/linux/issues/140
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Clang warns when one enumerated type is implicitly converted to another:
drivers/pinctrl/bcm/pinctrl-bcm2835.c:707:40: warning: implicit
conversion from enumeration type 'enum bcm2835_pinconf_param' to
different enumeration type 'enum pin_config_param' [-Wenum-conversion]
configs[0] = pinconf_to_config_packed(BCM2835_PINCONF_PARAM_PULL, pull);
~~~~~~~~~~~~~~~~~~~~~~~~ ^~~~~~~~~~~~~~~~~~~~~~~~~~
1 warning generated.
It is expected that pinctrl drivers can extend pin_config_param because
of the gap between PIN_CONFIG_END and PIN_CONFIG_MAX so this conversion
isn't an issue. Most drivers that take advantage of this define the
PIN_CONFIG variables as constants, rather than enumerated values. Do the
same thing here so that Clang no longer warns.
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Acked-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Clang warns when one enumerated type is implicitly converted to another:
drivers/pinctrl/sprd/pinctrl-sprd.c:845:19: warning: implicit conversion
from enumeration type 'enum sprd_pinconf_params' to different
enumeration type 'enum pin_config_param' [-Wenum-conversion]
{"sprd,control", SPRD_PIN_CONFIG_CONTROL, 0},
~ ^~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/sprd/pinctrl-sprd.c:846:22: warning: implicit conversion
from enumeration type 'enum sprd_pinconf_params' to different
enumeration type 'enum pin_config_param' [-Wenum-conversion]
{"sprd,sleep-mode", SPRD_PIN_CONFIG_SLEEP_MODE, 0},
~ ^~~~~~~~~~~~~~~~~~~~~~~~~~
It is expected that pinctrl drivers can extend pin_config_param because
of the gap between PIN_CONFIG_END and PIN_CONFIG_MAX so this conversion
isn't an issue. Most drivers that take advantage of this define the
PIN_CONFIG variables as constants, rather than enumerated values. Do the
same thing here so that Clang no longer warns.
Link: https://github.com/ClangBuiltLinux/linux/issues/138
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Reviewed-by: Baolin Wang <baolin.wang@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
This patch proposes to extend the sk_lookup() BPF API to the
XDP hookpoint. The sk_lookup() helper supports a lookup
on incoming packet to find the corresponding socket that will
receive this packet. Current support for this BPF API is
at the tc hookpoint. This patch will extend this API at XDP
hookpoint. A XDP program can map the incoming packet to the
5-tuple parameter and invoke the API to find the corresponding
socket structure.
Signed-off-by: Nitin Hande <Nitin.Hande@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
bpftool output is not user friendly when dumping a map with only a few
populated entries:
$ bpftool map
1: devmap name tx_devmap flags 0x0
key 4B value 4B max_entries 64 memlock 4096B
2: array name tx_idxmap flags 0x0
key 4B value 4B max_entries 64 memlock 4096B
$ bpftool map dump id 1
key:
00 00 00 00
value:
No such file or directory
key:
01 00 00 00
value:
No such file or directory
key:
02 00 00 00
value:
No such file or directory
key: 03 00 00 00 value: 03 00 00 00
Handle ENOENT by keeping the line format sane and dumping
"<no entry>" for the value
$ bpftool map dump id 1
key: 00 00 00 00 value: <no entry>
key: 01 00 00 00 value: <no entry>
key: 02 00 00 00 value: <no entry>
key: 03 00 00 00 value: 03 00 00 00
...
Signed-off-by: David Ahern <dsahern@gmail.com>
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Clang warns when one enumerated type is implicitly converted to another:
drivers/pinctrl/pinctrl-max77620.c:56:12: warning: implicit conversion
from enumeration type 'enum max77620_pinconf_param' to different
enumeration type 'enum pin_config_param' [-Wenum-conversion]
.param = MAX77620_ACTIVE_FPS_SOURCE,
^~~~~~~~~~~~~~~~~~~~~~~~~~
It is expected that pinctrl drivers can extend pin_config_param because
of the gap between PIN_CONFIG_END and PIN_CONFIG_MAX so this conversion
isn't an issue. Most drivers that take advantage of this define the
PIN_CONFIG variables as constants, rather than enumerated values. Do the
same thing here so that Clang no longer warns.
Link: https://github.com/ClangBuiltLinux/linux/issues/139
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
When attempting to setup up a gpio hog, device probing would repeatedly
fail with -EPROBE_DEFERED errors. It was caused by a circular dependency
between the gpio and pinctrl frameworks. If the gpio-ranges property is
present in device tree, then the gpio framework will handle the gpio pin
registration and eliminate the circular dependency.
See Christian Lamparter's commit a86caa9ba5 ("pinctrl: msm: fix
gpio-hog related boot issues") for a detailed commit message that
explains the issue in much more detail. The code comment in this commit
came from Christian's commit.
Signed-off-by: Brian Masney <masneyb@onstation.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Trivial fix to clean up indentation issues, add one level of
indentation on two if statements.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
This patch provides a tcp_bpf based eBPF sample. The test
- ncat(1) as the TCP client program to connect() to a port
with the intention of triggerring SYN retransmissions: we
first install an iptables DROP rule to make sure ncat SYNs are
resent (instead of aborting instantly after a TCP RST)
- has a bpf kernel module that sends a perf-event notification for
each TCP retransmit, and also tracks the number of such notifications
sent in the global_map
The test passes when the number of event notifications intercepted
in user-space matches the value in the global_map.
Signed-off-by: Sowmini Varadhan <sowmini.varadhan@oracle.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
This patch allows eBPF programs that use sock_ops to send perf
based event notifications using bpf_perf_event_output(). Our main
use case for this is the following:
We would like to monitor some subset of TCP sockets in user-space,
(the monitoring application would define 4-tuples it wants to monitor)
using TCP_INFO stats to analyze reported problems. The idea is to
use those stats to see where the bottlenecks are likely to be ("is
it application-limited?" or "is there evidence of BufferBloat in
the path?" etc).
Today we can do this by periodically polling for tcp_info, but this
could be made more efficient if the kernel would asynchronously
notify the application via tcp_info when some "interesting"
thresholds (e.g., "RTT variance > X", or "total_retrans > Y" etc)
are reached. And to make this effective, it is better if
we could apply the threshold check *before* constructing the
tcp_info netlink notification, so that we don't waste resources
constructing notifications that will be discarded by the filter.
This work solves the problem by adding perf event based notification
support for sock_ops. The eBPF program can thus be designed to apply
any desired filters to the bpf_sock_ops and trigger a perf event
notification based on the evaluation from the filter. The user space
component can use these perf event notifications to either read any
state managed by the eBPF program, or issue a TCP_INFO netlink call
if desired.
Signed-off-by: Sowmini Varadhan <sowmini.varadhan@oracle.com>
Co-developed-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Jiong Wang says:
====================
The maximum packet offset accessed by one BPF program is useful
information.
Because sometimes there could be packet split and it is possible for some
reasons (for example performance) we want to reject the BPF program if the
maximum packet size would trigger such split. Normally, MTU value is
treated as the maximum packet size, but one BPF program does not always
access the whole packet, it could only access the head portion of the data.
We could let verifier calculate the maximum packet offset ever used and
record it inside prog auxiliar information structure as a new field
"max_pkt_offset".
====================
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
NFP is refusing to offload programs whenever the MTU is set to a value
larger than the max packet bytes that fits in NFP Cluster Target Memory
(CTM). However, a eBPF program doesn't always need to access the whole
packet data.
Verifier has always calculated maximum direct packet access (DPA) offset,
and kept it in max_pkt_offset inside prog auxiliar information. This patch
relax prog rejection based on max_pkt_offset.
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Jiong Wang <jiong.wang@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
In check_packet_access, update max_pkt_offset after the offset has passed
__check_packet_access.
It should be safe to use u32 for max_pkt_offset as explained in code
comment.
Also, when there is tail call, the max_pkt_offset of the called program is
unknown, so conservatively set max_pkt_offset to MAX_PACKET_OFF for such
case.
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Jiong Wang <jiong.wang@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Currently when an AP and STA interfaces are active in the same or different
radios, regulatory settings are restored whenever the STA disconnects. This
restores all channel information including dfs states in all radios.
For example, if an AP interface is active in one radio and STA in another,
when radar is detected on the AP interface, the dfs state of the channel
will be changed to UNAVAILABLE. But when the STA interface disconnects,
this issues a regulatory disconnect hint which restores all regulatory
settings in all the radios attached and thereby losing the stored dfs
state on the other radio where the channel was marked as unavailable
earlier. Hence prevent such regulatory restore whenever another active
beaconing interface is present in the same or other radios.
Signed-off-by: Sriram R <srirrama@codeaurora.org>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Building a kernel out of tree with:
make O=/tmp/b oldconfig
cd /tmp/b
make
gives this error:
CALL /mnt/kernel/kernel/linux/scripts/atomic/check-atomics.sh
/bin/bash: scripts/atomic/check-atomics.sh: No such file or directory
make[3]: *** [/mnt/kernel/kernel/linux/./Kbuild:86: old-atomics] Error 127
make[3]: *** Waiting for unfinished jobs....
Make the command use the proper build prerequisite which is the absolute
path to the script.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will.deacon@arm.com>
Cc: arnd@arndb.de
Cc: aryabinin@virtuozzo.com
Cc: catalin.marinas@arm.com
Cc: dvyukov@google.com
Cc: glider@google.com
Cc: linux-arm-kernel@lists.infradead.org
Cc: linuxdrivers@attotech.com
Fixes: 8d32588077 ("locking/atomics: Check generated headers are up-to-date")
Link: http://lkml.kernel.org/r/20181108194128.13368-1-bp@alien8.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
If the FTM responder settings are changed simultaneously with
the CSA beacon, the buffer size allocated isn't sufficient and
we'll have a heap overrun. Fix this.
While at it, also clean up the ftm_responder assignment, doing
it only if ftm_responder is non-zero is valid as it's 0 to start
with, but not really useful to understand the code.
Fixes: bc847970f4 ("mac80211: support FTM responder configuration/statistics")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When FTM is enabled, doing a CSA will unexpectedly lose it since
the value of ftm_responder may be initialized to 0 instead of -1,
so fix that.
Fixes: 81e54d08d9 ("cfg80211: support FTM responder configuration/statistics")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This fixes stale beacon-int values that would keep a netdev
from going up.
To reproduce:
Create two VAP on one radio.
vap1 has beacon-int 100, start it.
vap2 has beacon-int 240, start it (and it will fail
because beacon-int mismatch).
reconfigure vap2 to have beacon-int 100 and start it.
It will fail because the stale beacon-int 240 will be used
in the ifup path and hostapd never gets a chance to set the
new beacon interval.
Cc: stable@vger.kernel.org
Signed-off-by: Ben Greear <greearb@candelatech.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
cfg80211_sta_opmode_change_notify needs a gfp_t flag to hint the nl80211
stack when allocating new skb, but it is called under tasklet context
here with GFP_KERNEL and kernel will yield a warning about it.
Cc: stable@vger.kernel.org
Fixes: ff84e7bfe1 ("mac80211: Add support to notify ht/vht opmode modification.")
Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com>
ACKed-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Do a logical vht_capa &= vht_capa_mask of user-supplied VHT mask with
the driver-supplied mask of modifiable VHT capabilities.
Fix whitespaces and comment typos.
Signed-off-by: Sergey Matyukevich <sergey.matyukevich.os@quantenna.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Add the missing unlock before return from function
ieee80211_mark_sta_auth() in the error handling case.
Cc: stable@vger.kernel.org
Fixes: fc107a9330 ("mac80211: Helper function for marking STA authenticated")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
[use result variable/label instead of duplicating]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
There is no unregister netlink notifier and family on error paths
in init_mac80211_hwsim(). Also there is an error path where
hwsim_class is not destroyed.
Found by Linux Driver Verification project (linuxtesting.org).
Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Fixes: 62759361eb ("mac80211-hwsim: Provide multicast event for HWSIM_CMD_NEW_RADIO")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Some panels need an active-low data enable (DE) signal for the RGB
interface. This requires flipping a bit in the TCON0 polarity register
when setting up the mode for the RGB interface.
Match the associated bus flag and use it to set the polarity inversion
bit for the DE signal when required.
Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181107181843.27628-4-contact@paulk.fr
Features such as dithering and pixel data edge configuration currently
rely on the panel registered with the TCON driver. However, bridges are
also supported in addition to panels for RGB setup.
Instead of retrieving the connector from the panel, get it from the
encoder with the dedicated helper.
Even in the case of bridges, the connector is registered with the
encoder from our driver and is accessible when iterating connectors.
Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181107181843.27628-3-contact@paulk.fr
Passing the encoder to the TCON RGB setup functions allows accessing the
connector from the encoder directly instead of relying on the panel.
Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181107181843.27628-2-contact@paulk.fr
Update references to other bpftool man pages at the bottom of each
manual page. Also reference the "bpf(2)" and "bpf-helpers(7)" man pages.
References are sorted by number of man section, then by
"prog-and-map-go-first", the other pages in alphabetical order.
Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Function open_obj_pinned() prints error messages when it fails to open a
link in the BPF virtual file system. However, in some occasions it is
not desirable to print an error, for example when we parse all links
under the bpffs root, and the error is due to some paths actually being
symbolic links.
Example output:
# ls -l /sys/fs/bpf/
lrwxrwxrwx 1 root root 0 Oct 18 19:00 ip -> /sys/fs/bpf/tc/
drwx------ 3 root root 0 Oct 18 19:00 tc
lrwxrwxrwx 1 root root 0 Oct 18 19:00 xdp -> /sys/fs/bpf/tc/
# bpftool --bpffs prog show
Error: bpf obj get (/sys/fs/bpf): Permission denied
Error: bpf obj get (/sys/fs/bpf): Permission denied
# strace -e bpf bpftool --bpffs prog show
bpf(BPF_OBJ_GET, {pathname="/sys/fs/bpf/ip", bpf_fd=0}, 72) = -1 EACCES (Permission denied)
Error: bpf obj get (/sys/fs/bpf): Permission denied
bpf(BPF_OBJ_GET, {pathname="/sys/fs/bpf/xdp", bpf_fd=0}, 72) = -1 EACCES (Permission denied)
Error: bpf obj get (/sys/fs/bpf): Permission denied
...
To fix it, pass a bool as a second argument to the function, and prevent
it from printing an error when the argument is set to true.
Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Edit the documentation of the -f|--bpffs option to make it explicit that
it dumps paths of pinned programs when bpftool is used to list the
programs only, so that users do not believe they will see the name of
the newly pinned program with "bpftool prog pin" or "bpftool prog load".
Also fix the plain output: do not add a blank line after each program
block, in order to remain consistent with what bpftool does when the
option is not passed.
Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Function getline() returns -1 on failure to read a line, thus creating
an infinite loop in get_fdinfo() if the key is not found. Fix it by
calling the function only as long as we get a strictly positive return
value.
Found by copying the code for a key which is not always present...
Fixes: 71bb428fe2 ("tools: bpf: add bpftool")
Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Commit f6f3bac08f ("tools/bpf: bpftool: add net support")
added certain networking support to bpftool.
The implementation relies on a relatively recent uapi header file
linux/tc_act/tc_bpf.h on the host which contains the marco
definition of TCA_ACT_BPF_ID.
Unfortunately, this is not the case for all distributions.
See the email message below where rhel-7.2 does not have
an up-to-date linux/tc_act/tc_bpf.h.
https://www.mail-archive.com/linux-kernel@vger.kernel.org/msg1799211.html
Further investigation found that linux/pkt_cls.h is also needed for macro
TCA_BPF_TAG.
This patch fixed the issue by copying linux/tc_act/tc_bpf.h
and linux/pkt_cls.h from kernel include/uapi directory to
tools/include/uapi directory so building the bpftool does not depend
on host system for these files.
Fixes: f6f3bac08f ("tools/bpf: bpftool: add net support")
Reported-by: kernel test robot <rong.a.chen@intel.com>
Cc: Li Zhijian <zhijianx.li@intel.com>
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Lookup functions in sk_lookup have different expectations about byte
order of provided arguments.
Specifically __inet_lookup, __udp4_lib_lookup and __udp6_lib_lookup
expect dport to be in network byte order and do ntohs(dport) internally.
At the same time __inet6_lookup expects dport to be in host byte order
and correspondingly name the argument hnum.
sk_lookup works correctly with __inet_lookup, __udp4_lib_lookup and
__inet6_lookup with regard to dport. But in __udp6_lib_lookup case it
uses host instead of expected network byte order. It makes result
returned by bpf_sk_lookup_udp for IPv6 incorrect.
The patch fixes byte order of dport passed to __udp6_lib_lookup.
Originally sk_lookup properly handled UDPv6, but not TCPv6. 5ef0ae84f0
fixes TCPv6 but breaks UDPv6.
Fixes: 5ef0ae84f0 ("bpf: Fix IPv6 dport byte-order in bpf_sk_lookup")
Signed-off-by: Andrey Ignatov <rdna@fb.com>
Acked-by: Joe Stringer <joe@wand.net.nz>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Commit 9da3f2b740 ("x86/fault: BUG() when uaccess helpers fault on
kernel addresses") introduced a regression for booting Xen PV guests.
Xen PV guests are using __put_user() and __get_user() for accessing the
p2m map (physical to machine frame number map) as accesses might fail
in case of not populated areas of the map.
With above commit using __put_user() and __get_user() for accessing
kernel pages is no longer valid. So replace the Xen hack by adding
appropriate p2m access functions using the default fixup handler.
Fixes: 9da3f2b740 ("x86/fault: BUG() when uaccess helpers fault on kernel addresses")
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Callers of of_irq_parse_one() blindly use the pointer args.np
without checking whether of_irq_parse_one() had an error and
thus did not set the value of args.np. Initialize args to
zero so that using the format "%pOF" to show the value of
args.np will show "(null)" when of_irq_parse_one() has an
error. This prevents the dereference of a random value.
Make the same fix for callers of of_parse_phandle_with_args()
and of_parse_phandle_with_args_map().
Reported-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Alan Tull <atull@kernel.org>
Signed-off-by: Frank Rowand <frank.rowand@sony.com>
One accessor of overlays[] was using a hard coded index value to
find the correct array entry instead of searching for the entry
containing the correct name.
Tested-by: Alan Tull <atull@kernel.org>
Signed-off-by: Frank Rowand <frank.rowand@sony.com>
The overlay metadata nodes in the FDT created from testcases.dts
are not handled properly.
The __fixups__ and __local_fixups__ node were added to the live
devicetree, but should not be.
Only the first property in the /__symbols__ node was added to the
live devicetree if the live devicetree already contained a
/__symbols node. All of the node's properties must be added.
Tested-by: Alan Tull <atull@kernel.org>
Signed-off-by: Frank Rowand <frank.rowand@sony.com>
Overlay nodes added by add_changeset_node() do not have the node
fields name, phandle, and type set.
The node passed to __of_attach_node() when the add node changeset
entry is processed does not contain any properties. The node's
properties are located in add property changeset entries that will
be processed after the add node changeset is applied.
Set the node's fields in the node contained in the add node
changeset entry and do not set them to incorrect values in
add_changeset_node().
A visible symptom that is fixed by this patch is the names of nodes
added by overlays that have an entry in /sys/bus/platform/drivers/*/
will contain the unit-address but the node-name will be <NULL>, for
example, "fc4ab000.<NULL>". After applying the patch the name, in
this example, for node restart@fc4ab000 is "fc4ab000.restart".
Tested-by: Alan Tull <atull@kernel.org>
Signed-off-by: Frank Rowand <frank.rowand@sony.com>
Argument unittest_nr is not used in of_unittest_apply_overlay(),
remove it.
Tested-by: Alan Tull <atull@kernel.org>
Signed-off-by: Frank Rowand <frank.rowand@sony.com>
Add test case of two fragments updating the same property. After
adding the test case, the system hangs at end of boot, after
after slub stack dumps from kfree() in crypto modprobe code.
Multiple overlay fragments adding, modifying, or deleting the same
property is not supported. Add check to detect the attempt and fail
the overlay apply.
Before this patch, the first fragment error would terminate
processing. Allow fragment checking to proceed and report all
of the fragment errors before terminating the overlay apply. This
is not a hot path, thus not a performance issue (the error is not
transient and requires fixing the overlay before attempting to
apply it again).
After applying this patch, the devicetree unittest messages will
include:
OF: overlay: ERROR: multiple fragments add, update, and/or delete property /testcase-data-2/substation@100/motor-1/rpm_avail
...
### dt-test ### end of unittest - 212 passed, 0 failed
The check to detect two fragments updating the same property is
folded into the patch that created the test case to maintain
bisectability.
Tested-by: Alan Tull <atull@kernel.org>
Signed-off-by: Frank Rowand <frank.rowand@sony.com>
Multiple overlay fragments adding or deleting the same node is not
supported. Replace code comment of such, with check to detect the
attempt and fail the overlay apply.
Devicetree unittest where multiple fragments added the same node was
added in the previous patch in the series. After applying this patch
the unittest messages will no longer include:
Duplicate name in motor-1, renamed to "controller#1"
OF: overlay: of_overlay_apply() err=0
### dt-test ### of_overlay_fdt_apply() expected -22, ret=0, overlay_bad_add_dup_node
### dt-test ### FAIL of_unittest_overlay_high_level():2419 Adding overlay 'overlay_bad_add_dup_node' failed
...
### dt-test ### end of unittest - 210 passed, 1 failed
but will instead include:
OF: overlay: ERROR: multiple overlay fragments add and/or delete node /testcase-data-2/substation@100/motor-1/controller
...
### dt-test ### end of unittest - 211 passed, 0 failed
Tested-by: Alan Tull <atull@kernel.org>
Signed-off-by: Frank Rowand <frank.rowand@sony.com>
Multiple overlay fragments adding or deleting the same node is not
supported. An attempt to do so results in an incorrect devicetree.
The node name will be munged for the second add.
After adding this patch, the unittest messages will show:
Duplicate name in motor-1, renamed to "controller#1"
OF: overlay: of_overlay_apply() err=0
### dt-test ### of_overlay_fdt_apply() expected -22, ret=0, overlay_bad_add_dup_node
### dt-test ### FAIL of_unittest_overlay_high_level():2419 Adding overlay 'overlay_bad_add_dup_node' failed
...
### dt-test ### end of unittest - 210 passed, 1 failed
The incorrect (munged) node name "controller#1" can be seen in the
/proc filesystem:
$ pwd
/proc/device-tree/testcase-data-2/substation@100/motor-1
$ ls
compatible controller controller#1 name phandle spin
$ ls controller
power_bus
$ ls controller#1
power_bus_emergency
Tested-by: Alan Tull <atull@kernel.org>
Signed-off-by: Frank Rowand <frank.rowand@sony.com>
Make overlay.c debug and error messages unique so that they can be
unambiguously found by grep.
Tested-by: Alan Tull <atull@kernel.org>
Signed-off-by: Frank Rowand <frank.rowand@sony.com>
If overlay properties #address-cells or #size-cells are already in
the live devicetree for any given node, then the values in the
overlay must match the values in the live tree.
If the properties are already in the live tree then there is no
need to create a changeset entry to add them since they must
have the same value. This reduces the memory used by the
changeset and eliminates a possible memory leak.
Tested-by: Alan Tull <atull@kernel.org>
Signed-off-by: Frank Rowand <frank.rowand@sony.com>
Order the fields of struct fragment in the same order as
struct of_overlay_notify_data. The order in struct fragment is
not significant. If both structs are ordered the same then when
examining the data in a debugger or dump the human involved does
not have to remember which context they are examining.
Tested-by: Alan Tull <atull@kernel.org>
Signed-off-by: Frank Rowand <frank.rowand@sony.com>
When allocating a new node, add_changeset_node() was duplicating the
properties from the respective node in the overlay instead of
allocating a node with no properties.
When this patch is applied the errors reported by the devictree
unittest from patch "of: overlay: add tests to validate kfrees from
overlay removal" will no longer occur. These error messages are of
the form:
"OF: ERROR: ..."
and the unittest results will change from:
### dt-test ### end of unittest - 203 passed, 7 failed
to
### dt-test ### end of unittest - 210 passed, 0 failed
Tested-by: Alan Tull <atull@kernel.org>
Signed-off-by: Frank Rowand <frank.rowand@sony.com>
The changeset entry 'update property' was used for new properties in
an overlay instead of 'add property'.
The decision of whether to use 'update property' was based on whether
the property already exists in the subtree where the node is being
spliced into. At the top level of creating a changeset describing the
overlay, the target node is in the live devicetree, so checking whether
the property exists in the target node returns the correct result.
As soon as the changeset creation algorithm recurses into a new node,
the target is no longer in the live devicetree, but is instead in the
detached overlay tree, thus all properties are incorrectly found to
already exist in the target.
This fix will expose another devicetree bug that will be fixed
in the following patch in the series.
When this patch is applied the errors reported by the devictree
unittest will change, and the unittest results will change from:
### dt-test ### end of unittest - 210 passed, 0 failed
to
### dt-test ### end of unittest - 203 passed, 7 failed
Tested-by: Alan Tull <atull@kernel.org>
Signed-off-by: Frank Rowand <frank.rowand@sony.com>
The previous commit, "of: overlay: add missing of_node_get() in
__of_attach_node_sysfs" added a missing of_node_get() to
__of_attach_node_sysfs(). This results in a refcount imbalance
for nodes attached with dlpar_attach_node(). The calling sequence
from dlpar_attach_node() to __of_attach_node_sysfs() is:
dlpar_attach_node()
of_attach_node()
__of_attach_node_sysfs()
For more detailed description of the node refcount, see
commit 68baf692c4 ("powerpc/pseries: Fix of_node_put() underflow
during DLPAR remove").
Tested-by: Alan Tull <atull@kernel.org>
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Frank Rowand <frank.rowand@sony.com>
