Since the req_speeds field in struct ice_link_status is a u8,
req_speeds & ICE_AQ_LINK_SPEED_40GB always returns 0. This was caught
by a coverity scan.
Fix this by changing req_speeds to be u16.
Reported-by: Bruce Allan <bruce.w.allan@intel.com>
Signed-off-by: Chinh T Cao <chinh.t.cao@intel.com>
Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Convert drm_atomic_plane_check() over to using explicit old vs. new
plane states. Avoids the confusion of "what does plane->state mean
again?".
v2: Stick to the multi-stage logic in plane_switching_crtc() (Daniel)
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20181106191624.2207-1-ville.syrjala@linux.intel.com
Replace 'crtc->state' with the explicit old crtc state.
Actually it shouldn't matter whether we use the old or the new
crtc state here since any plane that has been removed from the
crtc since the crtc state was duplicated will have been added
to the atomic state already. That is, you can't call
drm_atomic_set_crtc_for_plane() without having the new
plane state already in hand.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181101184646.14753-1-ville.syrjala@linux.intel.com
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Harry Wentland <harry.wentland@amd.com>
A few more fixes that have come in, and one revert of a previous fix.
I was a bit too trigger happy to enable PREEMPT on multi_v7_defconfig,
and it ended up regressing at least BeagleBone XM boards. While we get
that debugged for next merge window, let's disable it again.
Beyond that:
- Stratix change to fix multicast filtering
- Minor DT fixes for Renesas and i.MX
- Ethernet fix for a Renesas board (switching main interfaces)
- Ethernet phy regulator fix for i.MX6SX
-----BEGIN PGP SIGNATURE-----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=smBp
-----END PGP SIGNATURE-----
Merge tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC fixes from Olof Johansson:
"A few more fixes that have come in, and one revert of a previous fix.
I was a bit too trigger happy to enable PREEMPT on multi_v7_defconfig,
and it ended up regressing at least BeagleBone XM boards. While we get
that debugged for next merge window, let's disable it again.
Beyond that:
- Stratix change to fix multicast filtering
- Minor DT fixes for Renesas and i.MX
- Ethernet fix for a Renesas board (switching main interfaces)
- Ethernet phy regulator fix for i.MX6SX"
* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
arm64: dts: stratix10: fix multicast filtering
ARM: defconfig: Disable PREEMPT again on multi_v7
arm64: dts: renesas: condor: switch from EtherAVB to GEther
dt-bindings: arm: Fix RZ/G2E part number
arm64: dts: renesas: r8a7795: add missing dma-names on hscif2
ARM: dts: imx6sx-sdb: Fix enet phy regulator
ARM: dts: fsl: Fix improperly quoted stdout-path values
ARM: dts: imx6sll: fix typo for fsl,imx6sll-i2c node
Pull HID fixes from Jiri Kosina:
- hid.git is moving towards group maintainership (where group is myself
and Benjamin Tissoires), therefore this pull request updates
MAINTAINERS accordingly
- fix for hid-asus config dependency from Arnd Bergmann
- two device-specific quirks for i2c-hid from Julian Sax and Kai-Heng
Feng
- other few small assorted fixes
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
HID: fix up .raw_event() documentation
HID: asus: fix build warning wiht CONFIG_ASUS_WMI disabled
HID: i2c-hid: add Direkt-Tek DTLAPY133-1 to descriptor override
HID: moving to group maintainership model
HID: alps: allow incoming reports when only the trackstick is opened
Revert "HID: add NOGET quirk for Eaton Ellipse MAX UPS"
HID: i2c-hid: Add a small delay after sleep command for Raydium touchpanel
HID: hiddev: fix potential Spectre v1
This patch unifies the naming of DRM functions for reference counting
of struct drm_device. The resulting code is more aligned with the rest
of the Linux kernel interfaces.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Some devices such as the TPO TPG110 display panel require
a "high-impedance turn-around", in effect a clock cycle after
switching the line from output to input mode.
Support this in the GPIO driver to begin with. Other driver
may implement it if they can, it is unclear if this can
be achieved with anything else than GPIO bit-banging.
Cc: Andrzej Hajda <a.hajda@samsung.com>
Acked-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Fix an issue with the 32-bit range error path in `rtc_hctosys' where no
error code is set and consequently the successful preceding call result
from `rtc_read_time' is propagated to `rtc_hctosys_ret'. This in turn
makes any subsequent call to `hctosys_show' incorrectly report in sysfs
that the system time has been set from this RTC while it has not.
Set the error to ERANGE then if we can't express the result due to an
overflow.
Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org>
Fixes: b3a5ac42ab ("rtc: hctosys: Ensure system time doesn't overflow time_t")
Cc: stable@vger.kernel.org # 4.17+
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
When there is no IRQ configured for the RTC, the rtc-cmos code does not
support alarms, all alarm rtc_ops fail with -EIO / -EINVAL.
The rtc-core expects a rtc driver which does not support rtc alarms to
not have alarm ops at all. Otherwise the wakealarm sysfs attr will read
as empty rather then returning an error, making it impossible for
userspace to find out beforehand if alarms are supported.
A system without an IRQ for the RTC before this patch:
[root@localhost ~]# cat /sys/class/rtc/rtc0/wakealarm
[root@localhost ~]#
After this patch:
[root@localhost ~]# cat /sys/class/rtc/rtc0/wakealarm
cat: /sys/class/rtc/rtc0/wakealarm: No such file or directory
[root@localhost ~]#
This fixes gnome-session + systemd trying to use suspend-then-hibernate,
which causes systemd to abort the suspend when writing the RTC alarm fails.
BugLink: https://github.com/systemd/systemd/issues/9988
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
-----BEGIN PGP SIGNATURE-----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=7zP6
-----END PGP SIGNATURE-----
Merge tag 'stratix10_dts_fix_for_v4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux into fixes
ARM: dts: stratix10: fix multicast filtering
On Stratix 10, the EMAC has 256 hash buckets for multicast filtering. This
needs to be specified in DTS, otherwise the stmmac driver defaults to 64
buckets and initializes the filter incorrectly. As a result, e.g. valid
IPv6 multicast traffic ends up being dropped.
* tag 'stratix10_dts_fix_for_v4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux:
arm64: dts: stratix10: fix multicast filtering
Signed-off-by: Olof Johansson <olof@lixom.net>
bs.bh was taken in previous ext4_xattr_block_find() call,
it should be released before re-using
Fixes: 7e01c8e542 ("ext3/4: fix uninitialized bs in ...")
Signed-off-by: Vasily Averin <vvs@virtuozzo.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org # 2.6.26
* R-Car V3H (r8a77980) based Condor board
- Switch from EtherAVB to GEther to match offical boards
* RZ/G2E (ra8774c0) SoC: correct documentation of part number
* R-Car H3 (r8a7795) SoC: reinstate all DMA channels on HSCIF2
-----BEGIN PGP SIGNATURE-----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=D2ob
-----END PGP SIGNATURE-----
Merge tag 'renesas-fixes-for-v4.20' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into fixes
Renesas ARM Based SoC Fixes for v4.20
* R-Car V3H (r8a77980) based Condor board
- Switch from EtherAVB to GEther to match offical boards
* RZ/G2E (ra8774c0) SoC: correct documentation of part number
* R-Car H3 (r8a7795) SoC: reinstate all DMA channels on HSCIF2
* tag 'renesas-fixes-for-v4.20' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
arm64: dts: renesas: condor: switch from EtherAVB to GEther
dt-bindings: arm: Fix RZ/G2E part number
arm64: dts: renesas: r8a7795: add missing dma-names on hscif2
Signed-off-by: Olof Johansson <olof@lixom.net>
Add r8a77470 to the list of examples with soctypes.
No driver change is needed as "renesas,qspi" will activate
the right code within the corresponding driver.
Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Fixes: bfe0a5f47a ("ext4: add more mount time checks of the superblock")
Reported-by: Vasily Averin <vvs@virtuozzo.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org # 4.18
Exercising the gpu reloc path strenuously revealed an issue where the
updated relocations (from MI_STORE_DWORD_IMM) were not being observed
upon execution. After some experiments with adding pipecontrols (a lot
of pipecontrols (32) as gen4/5 do not have a bit to wait on earlier pipe
controls or even the current on), it was discovered that we merely
needed to delay the EMIT_INVALIDATE by several flushes. It is important
to note that it is the EMIT_INVALIDATE as opposed to the EMIT_FLUSH that
needs the delay as opposed to what one might first expect -- that the
delay is required for the TLB invalidation to take effect (one presumes
to purge any CS buffers) as opposed to a delay after flushing to ensure
the writes have landed before triggering invalidation.
Testcase: igt/gem_tiled_fence_blits
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: stable@vger.kernel.org
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181105094305.5767-1-chris@chris-wilson.co.uk
The i915 driver uses shmemfs to allocate backing storage for gem
objects. These shmemfs pages can be pinned (increased ref count) by
shmem_read_mapping_page_gfp(). When a lot of pages are pinned, vmscan
wastes a lot of time scanning these pinned pages. In some extreme case,
all pages in the inactive anon lru are pinned, and only the inactive
anon lru is scanned due to inactive_ratio, the system cannot swap and
invokes the oom-killer. Mark these pinned pages as unevictable to speed
up vmscan.
Export pagevec API check_move_unevictable_pages().
This patch was inspired by Chris Wilson's change [1].
[1]: https://patchwork.kernel.org/patch/9768741/
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Dave Hansen <dave.hansen@intel.com>
Signed-off-by: Kuo-Hsin Yang <vovoy@chromium.org>
Acked-by: Michal Hocko <mhocko@suse.com> # mm part
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Dave Hansen <dave.hansen@intel.com>
Acked-by: Andrew Morton <akpm@linux-foundation.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20181106132324.17390-1-chris@chris-wilson.co.uk
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Enable McSPI driver to be built for K3 platforms, to support McSPI on
AM654 SoC of K3 family.
Signed-off-by: Vignesh R <vigneshr@ti.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
AM654 SoC has same McSPI IP as OMAP2+ platforms. Add new compatible to
support McSPI on AM654 SoC.
Signed-off-by: Vignesh R <vigneshr@ti.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
arch/x86/kernel/early-quirks.c contains special PCI quirks that need to
run even before the usual DECLARE_PCI_FIXUP_EARLY() quirks. These have
typically been merged by the x86 maintainers, which is fine, but PCI folks
should at least see what's happening, so add a file pattern to the PCI
subsystem entry.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
With gcc 4.1:
drivers/regulator/bd718x7-regulator.c: In function ‘bd718xx_probe’:
drivers/regulator/bd718x7-regulator.c:1020: warning: initialization from incompatible pointer type
drivers/regulator/bd718x7-regulator.c:1024: warning: initialization from incompatible pointer type
Apparently this old compiler can't handle the obscure double
indirection.
However, there is no need for a double indirection. Just store a
pointer to the array instead, like other drivers tend to do.
Fixes: 494edd266b ("regulator/mfd: Support ROHM BD71847 power management IC")
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
SLIM_MSG_CLK_PAUSE_SEQ_FLG is never set in any of the slim core,
so performing a check in ngd driver is totally unnecessary.
Also this patch fixes warning about mc field overflow reported
with CoverityScan.
Making clk pause feature optional will be added to slim core in
next development cycle.
Reported-by: Colin Ian King <colin.king@canonical.com>
Fixes: 917809e228 ("slimbus: ngd: Add qcom SLIMBus NGD driver")
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
According to Asus firmware engineers, the meaning of these codes is only
to notify the OS that the screen brightness has been turned on/off by
the EC. This does not match the meaning of KEY_DISPLAYTOGGLE /
KEY_DISPLAY_OFF, where userspace is expected to change the display
brightness.
Signed-off-by: João Paulo Rechi Vita <jprvita@endlessm.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
When the OS registers to handle events from the display off hotkey the
EC will send a notification with 0x35 for every key press, independent
of the backlight state.
The behavior of this key on Windows, with the ATKACPI driver from Asus
installed, is turning off the backlight of all connected displays with a
fading effect, and any cursor input or key press turning the backlight
back on. The key press or cursor input that wakes up the display is also
passed through to the application under the cursor or under focus.
The key that matches this behavior the closest is KEY_SCREENLOCK.
Signed-off-by: João Paulo Rechi Vita <jprvita@endlessm.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
In the past, Asus firmwares would change the panel backlight directly
through the EC when the display off hotkey (Fn+F7) was pressed, and
only notify the OS of such change, with 0x33 when the LCD was ON and
0x34 when the LCD was OFF. These are currently mapped to
KEY_DISPLAYTOGGLE and KEY_DISPLAY_OFF, respectively.
Most recently the EC on Asus most machines lost ability to toggle the
LCD backlight directly, but unless the OS informs the firmware it is
going to handle the display toggle hotkey events, the firmware still
tries change the brightness through the EC, to no effect. The end result
is a long list (at Endless we counted 11) of Asus laptop models where
the display toggle hotkey does not perform any action. Our firmware
engineers contacts at Asus were surprised that there were still machines
out there with the old behavior.
Calling WMNB(ASUS_WMI_DEVID_BACKLIGHT==0x00050011, 2) on the _WDG device
tells the firmware that it should let the OS handle the display toggle
event, in which case it will simply notify the OS of a key press with
0x35, as shown by the DSDT excerpts bellow.
Scope (_SB)
{
(...)
Device (ATKD)
{
(...)
Name (_WDG, Buffer (0x28)
{
/* 0000 */ 0xD0, 0x5E, 0x84, 0x97, 0x6D, 0x4E, 0xDE, 0x11,
/* 0008 */ 0x8A, 0x39, 0x08, 0x00, 0x20, 0x0C, 0x9A, 0x66,
/* 0010 */ 0x4E, 0x42, 0x01, 0x02, 0x35, 0xBB, 0x3C, 0x0B,
/* 0018 */ 0xC2, 0xE3, 0xED, 0x45, 0x91, 0xC2, 0x4C, 0x5A,
/* 0020 */ 0x6D, 0x19, 0x5D, 0x1C, 0xFF, 0x00, 0x01, 0x08
})
Method (WMNB, 3, Serialized)
{
CreateDWordField (Arg2, Zero, IIA0)
CreateDWordField (Arg2, 0x04, IIA1)
Local0 = (Arg1 & 0xFFFFFFFF)
(...)
If ((Local0 == 0x53564544))
{
(...)
If ((IIA0 == 0x00050011))
{
If ((IIA1 == 0x02))
{
^^PCI0.SBRG.EC0.SPIN (0x72, One)
^^PCI0.SBRG.EC0.BLCT = One
}
Return (One)
}
}
(...)
}
(...)
}
(...)
}
(...)
Scope (_SB.PCI0.SBRG.EC0)
{
(...)
Name (BLCT, Zero)
(...)
Method (_Q10, 0, NotSerialized) // _Qxx: EC Query
{
If ((BLCT == Zero))
{
Local0 = One
Local0 = RPIN (0x72)
Local0 ^= One
SPIN (0x72, Local0)
If (ATKP)
{
Local0 = (0x34 - Local0)
^^^^ATKD.IANE (Local0)
}
}
ElseIf ((BLCT == One))
{
If (ATKP)
{
^^^^ATKD.IANE (0x35)
}
}
}
(...)
}
Signed-off-by: João Paulo Rechi Vita <jprvita@endlessm.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
The keycode KEY_FAVORITES(0x16c) used in thinkpad_acpi driver is too
big (out of range > 255) for xorg to handle.
xkeyboard-config has already mapped KEY_BOOKMARKS(156) to
XF86Favorites:
keycodes/evdev:
<I164> = 164; // #define KEY_BOOKMARKS 156
symbols/inet:
key <I164> { [ XF86Favorites ] };
So change the keymap to KEY_BOOKMARKS for Favorites hotkey.
Signed-off-by: Zhang Xianwei <zhang.xianwei8@zte.com.cn>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Make mod_verify_sig to use all trusted keys. This allows keys in
secondary_trusted_keys to be used to verify PKCS#7 signature on a
kernel module.
Signed-off-by: Ke Wu <mikewu@google.com>
Signed-off-by: Jessica Yu <jeyu@kernel.org>
gvt-fixes-2018-11-07
- Fix invalidate of old ggtt entry (Hang)
- Fix partial ggtt entry update in any order (Hang)
- Fix one mask setting for chicken reg (Xinyun)
- Fix eDP warning in guest (Longhe)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
From: Zhenyu Wang <zhenyuw@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181107023137.GO25194@zhen-hp.sh.intel.com
Atmel SAMA5D2 QuadSPI driver was moved from mtd to spi subsystem,
this change is just moving DT-binding documentation.
Suggested-by: Boris Brezillon <boris.brezillon@bootlin.com>
Signed-off-by: Piotr Bugalski <bugalski.piotr@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Kernel contains QSPI driver strongly tied to MTD and nor-flash memory.
New spi-mem interface allows usage also other memory types, especially
much larger NAND with SPI interface. This driver works as SPI controller
and is not related to MTD, however can work with NAND-flash or other
peripherals using spi-mem interface.
Suggested-by: Boris Brezillon <boris.brezillon@bootlin.com>
Signed-off-by: Piotr Bugalski <bugalski.piotr@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Code used for previous interface is no longer needed.
This change just removes obsolete code.
Suggested-by: Boris Brezillon <boris.brezillon@bootlin.com>
Signed-off-by: Piotr Bugalski <bugalski.piotr@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Previously added spi-mem interface is now used instead of older approach.
Suggested-by: Boris Brezillon <boris.brezillon@bootlin.com>
Signed-off-by: Piotr Bugalski <bugalski.piotr@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch adds new interface to existing driver. New code is not used yet,
it will be enabled later.
Changes are prepared in small steps to keep patches readable.
Suggested-by: Boris Brezillon <boris.brezillon@bootlin.com>
Signed-off-by: Piotr Bugalski <bugalski.piotr@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Just minor typo fix. Fixed in preparation of new driver.
Signed-off: Piotr Bugalski <bugalski.piotr@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
The pvpanic driver is available for architectures that do not
support ACPI.So break the dependency.
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Peng Hao <peng.hao2@zte.com.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Grouping ACPI related stuff and make preparation to break
the ACPI dependency w/o any functional change.
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Peng Hao <peng.hao2@zte.com.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
By default, when ACPI tables and FDT coexist for ARM64,
current kernel takes precedence over FDT to get device information.
Virt machine in qemu provides both FDT and ACPI table. Increases the
way to get information through FDT.
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Peng Hao <peng.hao2@zte.com.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
