Commit graph

932,869 commits

Author SHA1 Message Date
Dave Chinner
37fd167824 xfs: fix use-after-free race in xfs_buf_rele
When looking at a 4.18 based KASAN use after free report, I noticed
that racing xfs_buf_rele() may race on dropping the last reference
to the buffer and taking the buffer lock. This was the symptom
displayed by the KASAN report, but the actual issue that was
reported had already been fixed in 4.19-rc1 by commit e339dd8d8b
("xfs: use sync buffer I/O for sync delwri queue submission").

Despite this, I think there is still an issue with xfs_buf_rele()
in this code:

        release = atomic_dec_and_lock(&bp->b_hold, &pag->pag_buf_lock);
        spin_lock(&bp->b_lock);
        if (!release) {
.....

If two threads race on the b_lock after both dropping a reference
and one getting dropping the last reference so release = true, we
end up with:

CPU 0				CPU 1
atomic_dec_and_lock()
				atomic_dec_and_lock()
				spin_lock(&bp->b_lock)
spin_lock(&bp->b_lock)
<spins>
				<release = true bp->b_lru_ref = 0>
				<remove from lists>
				freebuf = true
				spin_unlock(&bp->b_lock)
				xfs_buf_free(bp)
<gets lock, reading and writing freed memory>
<accesses freed memory>
spin_unlock(&bp->b_lock) <reads/writes freed memory>

IOWs, we can't safely take bp->b_lock after dropping the hold
reference because the buffer may go away at any time after we
drop that reference. However, this can be fixed simply by taking the
bp->b_lock before we drop the reference.

It is safe to nest the pag_buf_lock inside bp->b_lock as the
pag_buf_lock is only used to serialise against lookup in
xfs_buf_find() and no other locks are held over or under the
pag_buf_lock there. Make this clear by documenting the buffer lock
orders at the top of the file.

Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com
Signed-off-by: Dave Chinner <david@fromorbit.com>
2018-10-18 17:21:29 +11:00
Allison Henderson
068f985a9e xfs: Add attibute remove and helper functions
This patch adds xfs_attr_remove_args. These sub-routines remove
the attributes specified in @args. We will use this later for setting
parent pointers as a deferred attribute operation.

Signed-off-by: Allison Henderson <allison.henderson@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
2018-10-18 17:21:23 +11:00
Allison Henderson
2f3cd80919 xfs: Add attibute set and helper functions
This patch adds xfs_attr_set_args and xfs_bmap_set_attrforkoff.
These sub-routines set the attributes specified in @args.
We will use this later for setting parent pointers as a deferred
attribute operation.

[dgc: remove attr fork init code from xfs_attr_set_args().]
[dgc: xfs_attr_try_sf_addname() NULLs args.trans after commit.]
[dgc: correct sf add error handling.]

Signed-off-by: Allison Henderson <allison.henderson@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
2018-10-18 17:21:16 +11:00
Allison Henderson
4c74a56b9d xfs: Add helper function xfs_attr_try_sf_addname
This patch adds a subroutine xfs_attr_try_sf_addname
used by xfs_attr_set.  This subrotine will attempt to
add the attribute name specified in args in shortform,
as well and perform error handling previously done in
xfs_attr_set.

This patch helps to pre-simplify xfs_attr_set for reviewing
purposes and reduce indentation.  New function will be added
in the next patch.

[dgc: moved commit to helper function, too.]

Signed-off-by: Allison Henderson <allison.henderson@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
2018-10-18 17:20:50 +11:00
Allison Henderson
e2421f0b5f xfs: Move fs/xfs/xfs_attr.h to fs/xfs/libxfs/xfs_attr.h
This patch moves fs/xfs/xfs_attr.h to fs/xfs/libxfs/xfs_attr.h
since xfs_attr.c is in libxfs.  We will need these later in
xfsprogs.

Signed-off-by: Allison Henderson <allison.henderson@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
2018-10-18 17:20:45 +11:00
Dave Chinner
56668a5cc4 xfs: issue log message on user force shutdown
The kernel only issues a log message that it's been shut down when
the filesystem triggers a shutdown itself. Hence there is no trace
in the log when a shutdown is triggered manually from userspace.
This can make it hard to see sequence of events in the log when
things go wrong, so make sure we always log a message when a
shutdown is run.

While there, clean up the logic flow so we don't have to continually
check if the shutdown trigger was user initiated before logging
shutdown messages.

Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
2018-10-18 17:20:39 +11:00
Darrick J. Wong
38b6238eb6 xfs: fix buffer state management in xrep_findroot_block
We don't handle buffer state properly in online repair's findroot
routine.  If a buffer already has b_ops set, we don't ever want to touch
that, and we don't want to call the read verifiers on a buffer that
could be dirty (CRCs are only recomputed during log checkpoints).

Therefore, be more careful about what we do with a buffer -- if someone
else already attached ops that are not the ones for this btree type,
just ignore the buffer.  We only attach our btree type's buf ops if it
matches the magic/uuid and structure checks.

We also modify xfs_buf_read_map to allow callers to set buffer ops on a
DONE buffer with NULL ops so that repair doesn't leave behind buffers
which won't have buffers attached to them.

Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
2018-10-18 17:20:35 +11:00
Darrick J. Wong
1aff5696f3 xfs: always assign buffer verifiers when one is provided
If a caller supplies buffer ops when trying to read a buffer and the
buffer doesn't already have buf ops assigned, ensure that the ops are
assigned to the buffer and the verifier is run on that buffer.

Note that current XFS code is careful to assign buffer ops after a
xfs_{trans_,}buf_read call in which ops were not supplied.  However, we
should apply ops defensively in case there is ever a coding mistake; and
an upcoming repair patch will need to be able to read a buffer without
assigning buf ops.

Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dave Chinner <david@fromorbit.com>
2018-10-18 17:20:30 +11:00
Darrick J. Wong
1002ff45ef xfs: xrep_findroot_block should reject root blocks with siblings
In xrep_findroot_block, if we find a candidate root block with sibling
pointers or sibling blocks on the same tree level, we should not return
that block as a tree root because root blocks cannot have siblings.

Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
2018-10-18 17:20:26 +11:00
Adam Borowski
dddde68b8f xfs: add a define for statfs magic to uapi
Needed by userspace programs that call fstatfs().

It'd be natural to publish XFS_SB_MAGIC in uapi, but while these two
have identical values, they have different semantic meaning: one is
an enum cookie meant for statfs, the other a signature of the
on-disk format.

Signed-off-by: Adam Borowski <kilobyte@angband.pl>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
2018-10-18 17:20:19 +11:00
Christoph Hellwig
4831822ff1 xfs: print dangling delalloc extents
Instead of just asserting that we have no delalloc space dangling
in an inode that gets freed print the actual offenders for debug
mode.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
2018-10-18 17:20:11 +11:00
Christoph Hellwig
032dc923b2 xfs: fix fork selection in xfs_find_trim_cow_extent
We should want to write directly into the data fork for blocks that don't
have an extent in the COW fork covering them yet.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
2018-10-18 17:19:58 +11:00
Christoph Hellwig
d392bc81bb xfs: remove the unused trimmed argument from xfs_reflink_trim_around_shared
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
2018-10-18 17:19:48 +11:00
Christoph Hellwig
fc439464e3 xfs: remove the unused shared argument to xfs_reflink_reserve_cow
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
2018-10-18 17:19:37 +11:00
Christoph Hellwig
0365c5d6c3 xfs: handle zeroing in xfs_file_iomap_begin_delay
We only need to allocate blocks for zeroing for reflink inodes,
and for we currently have a special case for reflink files in
the otherwise direct I/O path that I'd like to get rid of.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
2018-10-18 17:19:26 +11:00
Christoph Hellwig
daa79baefc xfs: remove suport for filesystems without unwritten extent flag
The option to enable unwritten extents was made default in 2003,
removed from mkfs in 2007, and cannot be disabled in v5.  We also
rely on it for a lot of common functionality, so filesystems without
it will run a completely untested and buggy code path.  Enabling the
support also is a simple bit flip using xfs_db, so legacy file
systems can still be brought forward.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
2018-10-18 17:18:58 +11:00
Christoph Hellwig
97e5a6e6dc xfs: remove XFS_IO_INVALID
The invalid state isn't any different from a hole, so merge the two
states.  Use the more descriptive hole name, but keep it as the first
value of the enum to catch uninitialized fields.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
2018-10-18 17:17:50 +11:00
Chengguang Xu
3642b29a63 fs/exofs: only use true/false for asignment of bool type variable
Signed-off-by: Chengguang Xu <cgxu519@gmx.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2018-10-18 02:04:59 -04:00
Chengguang Xu
515f1867ad fs/exofs: fix potential memory leak in mount option parsing
There are some cases can cause memory leak when parsing
option 'osdname'.

Signed-off-by: Chengguang Xu <cgxu519@gmx.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2018-10-18 02:04:59 -04:00
nixiaoming
55338ac2a9 Delete invalid assignment statements in do_sendfile
Assigning value -EINVAL to "retval" here, but that stored value is
overwritten before it can be used.

retval = -EINVAL;
....
retval = rw_verify_area(WRITE, out.file, &out_pos, count);

value_overwrite: Overwriting previous write to "retval" with value
from rw_verify_area

delete invalid assignment statements

Signed-off-by: n00202754 <nixiaoming@huawei.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2018-10-18 01:42:49 -04:00
Ingo Molnar
20e8e72d0f perf/urgent fixes:
- Stop fallbacking to kallsyms for vDSO symbols lookup, this wasn't
   being really used and is not valid in arches such as Sparc, where
   user and kernel space don't share the address space, relying only on
   cpumode to figure out what DSOs to lookup (Arnaldo Carvalho de Melo)
 
 - Align cpu map synthesized events properly, fixing SIGBUS in
   CPUs like Sparc (David Miller)
 
 - Fix use of alternatives to find JDIR (Jarod Wilson)
 
 - Store ids for events with their own cpus when synthesizing user
   level event details (scale, unit, etc) events, fixing a crash
   when recording a PMU event with a cpumask defined (Jiri Olsa)
 
 - Fix wrong filter_band* values for uncore Intel vendor events (Jiri Olsa)
 
 - Fix detection of tracefs path in systems without tracefs, where
   that path should be the debugfs mountpoint plus "/tracing/" (Jiri Olsa)
 
 - Pass build flags to traceevent build, allowing using alternative
   flags in distro packages, RPM, for instance (Jiri Olsa)
 
 - Fix 'perf report' crash on invalid inline debug information (Milian Wolff)
 
 - Synch kvm uapi copies (Arnaldo Carvalho de Melo)
 
 Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
 -----BEGIN PGP SIGNATURE-----
 
 iHUEABYIAB0WIQR2GiIUctdOfX2qHhGyPKLppCJ+JwUCW8eytQAKCRCyPKLppCJ+
 Jz94AP9Ra7FFmnMuffimP5pIkUacfqkLXPG3Lymxa8+pm0FH6gD/cWUZCxNdchBN
 v4zFXT1i9iR2YCKu8/1iijVx2wtpZQw=
 =Dh50
 -----END PGP SIGNATURE-----

Merge tag 'perf-urgent-for-mingo-4.19-20181017' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent

Pull perf/urgent fixes from Arnaldo Carvalho de Melo:

- Stop falling back to kallsyms for vDSO symbols lookup, this wasn't
  being really used and is not valid in arches such as Sparc, where
  user and kernel space don't share the address space, relying only on
  cpumode to figure out what DSOs to lookup (Arnaldo Carvalho de Melo)

- Align CPU map synthesized events properly, fixing SIGBUS in
  CPUs like Sparc (David Miller)

- Fix use of alternatives to find JDIR (Jarod Wilson)

- Store IDs for events with their own CPUs when synthesizing user
  level event details (scale, unit, etc) events, fixing a crash
  when recording a PMU event with a cpumask defined (Jiri Olsa)

- Fix wrong filter_band* values for uncore Intel vendor events (Jiri Olsa)

- Fix detection of tracefs path in systems without tracefs, where
  that path should be the debugfs mountpoint plus "/tracing/" (Jiri Olsa)

- Pass build flags to traceevent build, allowing using alternative
  flags in distro packages, RPM, for instance (Jiri Olsa)

- Fix 'perf report' crash on invalid inline debug information (Milian Wolff)

- Synch KVM UAPI copies (Arnaldo Carvalho de Melo)

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-10-18 07:41:29 +02:00
Nikolay Aleksandrov
eddf016b91 net: ipmr: fix unresolved entry dumps
If the skb space ends in an unresolved entry while dumping we'll miss
some unresolved entries. The reason is due to zeroing the entry counter
between dumping resolved and unresolved mfc entries. We should just
keep counting until the whole table is dumped and zero when we move to
the next as we have a separate table counter.

Reported-by: Colin Ian King <colin.king@canonical.com>
Fixes: 8fb472c09b ("ipmr: improve hash scalability")
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-17 22:35:42 -07:00
Gregory CLEMENT
06a36ecb5d net: mscc: ocelot: Fix comment in ocelot_vlant_wait_for_completion()
The ocelot_vlant_wait_for_completion() function is very similar to the
ocelot_mact_wait_for_completion(). It seemed to have be copied but the
comment was not updated, so let's fix it.

Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-17 22:33:43 -07:00
Xin Long
5660b9d9d6 sctp: fix the data size calculation in sctp_data_size
sctp data size should be calculated by subtracting data chunk header's
length from chunk_hdr->length, not just data header.

Fixes: 668c9beb90 ("sctp: implement assign_number for sctp_stream_interleave")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-17 22:32:21 -07:00
Gustavo A. R. Silva
82385b0d2d net: skbuff.h: Mark expected switch fall-throughs
In preparation to enabling -Wimplicit-fallthrough, mark switch cases
where we are expecting to fall through.

Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-17 22:31:30 -07:00
Arthur Kiyanovski
9fd255928d net: ena: enable Low Latency Queues
Use the new API to enable usage of LLQ.

Signed-off-by: Arthur Kiyanovski <akiyano@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-17 22:30:41 -07:00
Ake Koomsin
05c998b738 virtio_net: avoid using netif_tx_disable() for serializing tx routine
Commit 713a98d90c ("virtio-net: serialize tx routine during reset")
introduces netif_tx_disable() after netif_device_detach() in order to
avoid use-after-free of tx queues. However, there are two issues.

1) Its operation is redundant with netif_device_detach() in case the
   interface is running.
2) In case of the interface is not running before suspending and
   resuming, the tx does not get resumed by netif_device_attach().
   This results in losing network connectivity.

It is better to use netif_tx_lock_bh()/netif_tx_unlock_bh() instead for
serializing tx routine during reset. This also preserves the symmetry
of netif_device_detach() and netif_device_attach().

Fixes commit 713a98d90c ("virtio-net: serialize tx routine during reset")
Signed-off-by: Ake Koomsin <ake@igel.co.jp>
Acked-by: Jason Wang <jasowang@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-17 22:29:30 -07:00
Greg Kroah-Hartman
9bd871df56 This fixes two bugs:
- Fix size mismatch of tracepoint array
 
  - Have preemptirq test module use same clock source of the selftest
 -----BEGIN PGP SIGNATURE-----
 
 iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCW8eRhRQccm9zdGVkdEBn
 b29kbWlzLm9yZwAKCRAp5XQQmuv6qkEgAP4vscLVMSYBTUuDNXX0+l8FVdrpPagL
 1tjTJpTUfG3QLQEA9XOl8vR/Yy/BywcU7K2R3zGbo7Qh6AgpWl2pJcmsGQk=
 =XS5E
 -----END PGP SIGNATURE-----

Merge tag 'trace-v4.19-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace

Steven writes:
  "tracing: Two fixes for 4.19

   This fixes two bugs:
    - Fix size mismatch of tracepoint array
    - Have preemptirq test module use same clock source of the selftest"

* tag 'trace-v4.19-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
  tracing: Use trace_clock_local() for looping in preemptirq_delay_test.c
  tracepoint: Fix tracepoint array element size mismatch
2018-10-18 07:29:05 +02:00
Netanel Belgazal
8c590f9776 net: ena: Fix Kconfig dependency on X86
The Kconfig limitation of X86 is to too wide.
The ENA driver only requires a little endian dependency.

Change the dependency to be on little endian CPU.

Signed-off-by: Netanel Belgazal <netanel@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-17 22:28:34 -07:00
Paolo Abeni
84dad55951 udp6: fix encap return code for resubmitting
The commit eb63f2964d ("udp6: add missing checks on edumux packet
processing") used the same return code convention of the ipv4 counterpart,
but ipv6 uses the opposite one: positive values means resubmit.

This change addresses the issue, using positive return value for
resubmitting. Also update the related comment, which was broken, too.

Fixes: eb63f2964d ("udp6: add missing checks on edumux packet processing")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-17 22:26:53 -07:00
Ido Schimmel
9b3bc7db75 mlxsw: core: Fix use-after-free when flashing firmware during init
When the switch driver (e.g., mlxsw_spectrum) determines it needs to
flash a new firmware version it resets the ASIC after the flashing
process. The bus driver (e.g., mlxsw_pci) then registers itself again
with mlxsw_core which means (among other things) that the device
registers itself again with the hwmon subsystem again.

Since the device was registered with the hwmon subsystem using
devm_hwmon_device_register_with_groups(), then the old hwmon device
(registered before the flashing) was never unregistered and was
referencing stale data, resulting in a use-after free.

Fix by removing reliance on device managed APIs in mlxsw_hwmon_init().

Fixes: c86d62cc41 ("mlxsw: spectrum: Reset FW after flash")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reported-by: Alexander Petrovskiy <alexpe@mellanox.com>
Tested-by: Alexander Petrovskiy <alexpe@mellanox.com>
Reviewed-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-17 22:25:45 -07:00
David S. Miller
a58598a497 Merge branch 'tcp_bbr-TCP-BBR-changes-for-EDT-pacing-model'
Neal Cardwell says:

====================
tcp_bbr: TCP BBR changes for EDT pacing model

Two small patches for TCP BBR to follow up with Eric's recent work to change
the TCP and fq pacing machinery to an "earliest departure time" (EDT) model:

- The first patch adjusts the TCP BBR logic to work with the new
  "earliest departure time" (EDT) pacing model.

- The second patch adjusts the TCP BBR logic to centralize the setting
  of gain values, to simplify the code and prepare for future changes.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-17 22:22:54 -07:00
Neal Cardwell
cf33e25c0d tcp_bbr: centralize code to set gains
Centralize the code that sets gains used for computing cwnd and pacing
rate. This simplifies the code and makes it easier to change the state
machine or (in the future) dynamically change the gain values and
ensure that the correct gain values are always used.

Signed-off-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: Priyaranjan Jha <priyarjha@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-17 22:22:53 -07:00
Neal Cardwell
a87c83d5ee tcp_bbr: adjust TCP BBR for departure time pacing
Adjust TCP BBR for the new departure time pacing model in the recent
commit ab408b6dc7 ("tcp: switch tcp and sch_fq to new earliest
departure time model").

With TSQ and pacing at lower layers, there are often several skbs
queued in the pacing layer, and thus there is less data "in the
network" than "in flight".

With departure time pacing at lower layers (e.g. fq or potential
future NICs), the data in the pacing layer now has a pre-scheduled
("baked-in") departure time that cannot be changed, even if the
congestion control algorithm decides to use a new pacing rate.

This means that there can be a non-trivial lag between when BBR makes
a pacing rate change and when the inter-skb pacing delays
change. After a pacing rate change, the number of packets in the
network can gradually evolve to be higher or lower, depending on
whether the sending rate is higher or lower than the delivery
rate. Thus ignoring this lag can cause significant overshoot, with the
flow ending up with too many or too few packets in the network.

This commit changes BBR to adapt its pacing rate based on the amount
of data in the network that it estimates has already been "baked in"
by previous departure time decisions. We estimate the number of our
packets that will be in the network at the earliest departure time
(EDT) for the next skb scheduled as:

   in_network_at_edt = inflight_at_edt - (EDT - now) * bw

If we're increasing the amount of data in the network ("in_network"),
then we want to know if the transmit of the EDT skb will push
in_network above the target, so our answer includes
bbr_tso_segs_goal() from the skb departing at EDT. If we're decreasing
in_network, then we want to know if in_network will sink too low just
before the EDT transmit, so our answer does not include the segments
from the skb departing at EDT.

Why do we treat pacing_gain > 1.0 case and pacing_gain < 1.0 case
differently? The in_network curve is a step function: in_network goes
up on transmits, and down on ACKs. To accurately predict when
in_network will go beyond our target value, this will happen on
different events, depending on whether we're concerned about
in_network potentially going too high or too low:

 o if pushing in_network up (pacing_gain > 1.0),
   then in_network goes above target upon a transmit event

 o if pushing in_network down (pacing_gain < 1.0),
   then in_network goes below target upon an ACK event

This commit changes the BBR state machine to use this estimated
"packets in network" value to make its decisions.

Signed-off-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-17 22:22:53 -07:00
Yue Haibing
d65b1f2029 iomap: remove duplicated include from iomap.c
Remove duplicated include.

Signed-off-by: Yue Haibing <yuehaibing@huawei.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2018-10-18 01:18:55 -04:00
Vijay Khemka
cb10c7c0df net/ncsi: Add NCSI Broadcom OEM command
This patch adds OEM Broadcom commands and response handling. It also
defines OEM Get MAC Address handler to get and configure the device.

ncsi_oem_gma_handler_bcm: This handler send NCSI broadcom command for
getting mac address.
ncsi_rsp_handler_oem_bcm: This handles response received for all
broadcom OEM commands.
ncsi_rsp_handler_oem_bcm_gma: This handles get mac address response and
set it to device.

Signed-off-by: Vijay Khemka <vijaykhemka@fb.com>
Reviewed-by: Samuel Mendoza-Jonas <sam@mendozajonas.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-17 22:14:54 -07:00
Xin Long
c863850ce2 sctp: not free the new asoc when sctp_wait_for_connect returns err
When sctp_wait_for_connect is called to wait for connect ready
for sp->strm_interleave in sctp_sendmsg_to_asoc, a panic could
be triggered if cpu is scheduled out and the new asoc is freed
elsewhere, as it will return err and later the asoc gets freed
again in sctp_sendmsg.

[  285.840764] list_del corruption, ffff9f0f7b284078->next is LIST_POISON1 (dead000000000100)
[  285.843590] WARNING: CPU: 1 PID: 8861 at lib/list_debug.c:47 __list_del_entry_valid+0x50/0xa0
[  285.846193] Kernel panic - not syncing: panic_on_warn set ...
[  285.846193]
[  285.848206] CPU: 1 PID: 8861 Comm: sctp_ndata Kdump: loaded Not tainted 4.19.0-rc7.label #584
[  285.850559] Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011
[  285.852164] Call Trace:
...
[  285.872210]  ? __list_del_entry_valid+0x50/0xa0
[  285.872894]  sctp_association_free+0x42/0x2d0 [sctp]
[  285.873612]  sctp_sendmsg+0x5a4/0x6b0 [sctp]
[  285.874236]  sock_sendmsg+0x30/0x40
[  285.874741]  ___sys_sendmsg+0x27a/0x290
[  285.875304]  ? __switch_to_asm+0x34/0x70
[  285.875872]  ? __switch_to_asm+0x40/0x70
[  285.876438]  ? ptep_set_access_flags+0x2a/0x30
[  285.877083]  ? do_wp_page+0x151/0x540
[  285.877614]  __sys_sendmsg+0x58/0xa0
[  285.878138]  do_syscall_64+0x55/0x180
[  285.878669]  entry_SYSCALL_64_after_hwframe+0x44/0xa9

This is a similar issue with the one fixed in Commit ca3af4dd28
("sctp: do not free asoc when it is already dead in sctp_sendmsg").
But this one can't be fixed by returning -ESRCH for the dead asoc
in sctp_wait_for_connect, as it will break sctp_connect's return
value to users.

This patch is to simply set err to -ESRCH before it returns to
sctp_sendmsg when any err is returned by sctp_wait_for_connect
for sp->strm_interleave, so that no asoc would be freed due to
this.

When users see this error, they will know the packet hasn't been
sent. And it also makes sense to not free asoc because waiting
connect fails, like the second call for sctp_wait_for_connect in
sctp_sendmsg_to_asoc.

Fixes: 668c9beb90 ("sctp: implement assign_number for sctp_stream_interleave")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-17 22:12:46 -07:00
Marcelo Ricardo Leitner
b336decab2 sctp: fix race on sctp_id2asoc
syzbot reported an use-after-free involving sctp_id2asoc.  Dmitry Vyukov
helped to root cause it and it is because of reading the asoc after it
was freed:

        CPU 1                       CPU 2
(working on socket 1)            (working on socket 2)
	                         sctp_association_destroy
sctp_id2asoc
   spin lock
     grab the asoc from idr
   spin unlock
                                   spin lock
				     remove asoc from idr
				   spin unlock
				   free(asoc)
   if asoc->base.sk != sk ... [*]

This can only be hit if trying to fetch asocs from different sockets. As
we have a single IDR for all asocs, in all SCTP sockets, their id is
unique on the system. An application can try to send stuff on an id
that matches on another socket, and the if in [*] will protect from such
usage. But it didn't consider that as that asoc may belong to another
socket, it may be freed in parallel (read: under another socket lock).

We fix it by moving the checks in [*] into the protected region. This
fixes it because the asoc cannot be freed while the lock is held.

Reported-by: syzbot+c7dd55d7aec49d48e49a@syzkaller.appspotmail.com
Acked-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-17 22:11:14 -07:00
Heiner Kallweit
9675931e6b r8169: re-enable MSI-X on RTL8168g
Similar to d49c88d767 ("r8169: Enable MSI-X on RTL8106e") after
e9d0ba506e ("PCI: Reprogram bridge prefetch registers on resume")
we can safely assume that this also fixes the root cause of
the issue worked around by 7c53a72245 ("r8169: don't use MSI-X on
RTL8168g"). So let's revert it.

Fixes: 7c53a72245 ("r8169: don't use MSI-X on RTL8168g")
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-17 22:10:33 -07:00
David S. Miller
1010c17ec5 Merge branch 'mscc-fixes'
Gustavo A. R. Silva says:

====================
fix signedness bug and memory leak in mscc driver

This patchset aims to fix a signedness bug in function
vsc85xx_downshift_get() and a memory leak in function
vsc8574_config_pre_init().

Changes in v3:
 - Add Quentin's Reviewed-by to commit log in patch 2/2.
 - Post the series to netdev.

Changes in v2:
 - Add Quentin's Reviewed-by to commit log in patch 1/2.
 - Jump to out label so all functions in the driver exit with the PHY
   set to access the standard page. Thanks to Quentin Schulz for
   pointing this out.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-17 22:08:56 -07:00
Gustavo A. R. Silva
47d20212aa net: phy: mscc: fix memory leak in vsc8574_config_pre_init
In case memory resources for *fw* were successfully allocated,
release them before return.

Addresses-Coverity-ID: 1473968 ("Resource leak")
Fixes: 00d70d8e0e ("net: phy: mscc: add support for VSC8574 PHY")
Reviewed-by: Quentin Schulz <quentin.schulz@bootlin.com>
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-17 22:08:55 -07:00
Gustavo A. R. Silva
e519869af3 net: phy: mscc: fix signedness bug in vsc85xx_downshift_get
Currently, the error handling for the call to function
phy_read_paged() doesn't work because *reg_val* is of
type u16 (16 bits, unsigned), which makes it impossible
for it to hold a value less than 0.

Fix this by changing the type of variable *reg_val* to int.

Addresses-Coverity-ID: 1473970 ("Unsigned compared against 0")
Fixes: 6a0bfbbe20 ("net: phy: mscc: migrate to phy_select/restore_page functions")
Reviewed-by: Quentin Schulz <quentin.schulz@bootlin.com>
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-17 22:08:55 -07:00
Taehee Yoo
84258438e8 net: bpfilter: use get_pid_task instead of pid_task
pid_task() dereferences rcu protected tasks array.
But there is no rcu_read_lock() in shutdown_umh() routine so that
rcu_read_lock() is needed.
get_pid_task() is wrapper function of pid_task. it holds rcu_read_lock()
then calls pid_task(). if task isn't NULL, it increases reference count
of task.

test commands:
   %modprobe bpfilter
   %modprobe -rv bpfilter

splat looks like:
[15102.030932] =============================
[15102.030957] WARNING: suspicious RCU usage
[15102.030985] 4.19.0-rc7+ #21 Not tainted
[15102.031010] -----------------------------
[15102.031038] kernel/pid.c:330 suspicious rcu_dereference_check() usage!
[15102.031063]
	       other info that might help us debug this:

[15102.031332]
	       rcu_scheduler_active = 2, debug_locks = 1
[15102.031363] 1 lock held by modprobe/1570:
[15102.031389]  #0: 00000000580ef2b0 (bpfilter_lock){+.+.}, at: stop_umh+0x13/0x52 [bpfilter]
[15102.031552]
               stack backtrace:
[15102.031583] CPU: 1 PID: 1570 Comm: modprobe Not tainted 4.19.0-rc7+ #21
[15102.031607] Hardware name: To be filled by O.E.M. To be filled by O.E.M./Aptio CRB, BIOS 5.6.5 07/08/2015
[15102.031628] Call Trace:
[15102.031676]  dump_stack+0xc9/0x16b
[15102.031723]  ? show_regs_print_info+0x5/0x5
[15102.031801]  ? lockdep_rcu_suspicious+0x117/0x160
[15102.031855]  pid_task+0x134/0x160
[15102.031900]  ? find_vpid+0xf0/0xf0
[15102.032017]  shutdown_umh.constprop.1+0x1e/0x53 [bpfilter]
[15102.032055]  stop_umh+0x46/0x52 [bpfilter]
[15102.032092]  __x64_sys_delete_module+0x47e/0x570
[ ... ]

Fixes: d2ba09c17a ("net: add skeleton of bpfilter kernel module")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-17 22:03:40 -07:00
Gustavo A. R. Silva
efa61c8cf2 ptp: fix Spectre v1 vulnerability
pin_index can be indirectly controlled by user-space, hence leading
to a potential exploitation of the Spectre variant 1 vulnerability.

This issue was detected with the help of Smatch:

drivers/ptp/ptp_chardev.c:253 ptp_ioctl() warn: potential spectre issue
'ops->pin_config' [r] (local cap)

Fix this by sanitizing pin_index before using it to index
ops->pin_config, and before passing it as an argument to
function ptp_set_pinfunc(), in which it is used to index
info->pin_config.

Notice that given that speculation windows are large, the policy is
to kill the speculation on the first load and not worry if it can be
completed with a dependent load/store [1].

[1] https://marc.info/?l=linux-kernel&m=152449131114778&w=2

Cc: stable@vger.kernel.org
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-17 22:00:22 -07:00
Kyeongdon Kim
33c4368ee2 net: fix warning in af_unix
This fixes the "'hash' may be used uninitialized in this function"

net/unix/af_unix.c:1041:20: warning: 'hash' may be used uninitialized in this function [-Wmaybe-uninitialized]
  addr->hash = hash ^ sk->sk_type;

Signed-off-by: Kyeongdon Kim <kyeongdon.kim@lge.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-17 21:57:28 -07:00
Marek Behún
26422340da net: dsa: mv88e6xxx: Fix 88E6141/6341 2500mbps SERDES speed
This is a fix for the port_set_speed method for the Topaz family.
Currently the same method is used as for the Peridot family, but
this is wrong for the SERDES port.

On Topaz, the SERDES port is port 5, not 9 and 10 as in Peridot.
Moreover setting alt_bit on Topaz only makes sense for port 0 (for
(differentiating 100mbps vs 200mbps). The SERDES port does not
support more than 2500mbps, so alt_bit does not make any difference.

Signed-off-by: Marek Behún <marek.behun@nic.cz>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-17 21:56:15 -07:00
Dan Carpenter
62d6f3b7b8 sparc: vDSO: Silence an uninitialized variable warning
Smatch complains that "val" would be uninitialized if kstrtoul() fails.

Fixes: 9a08862a5d ("vDSO for sparc")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-17 21:55:02 -07:00
Nathan Chancellor
8c3bf9b62b net: qla3xxx: Remove overflowing shift statement
Clang currently warns:

drivers/net/ethernet/qlogic/qla3xxx.c:384:24: warning: signed shift
result (0xF00000000) requires 37 bits to represent, but 'int' only has
32 bits [-Wshift-overflow]
                    ((ISP_NVRAM_MASK << 16) | qdev->eeprom_cmd_data));
                      ~~~~~~~~~~~~~~ ^  ~~
1 warning generated.

The warning is certainly accurate since ISP_NVRAM_MASK is defined as
(0x000F << 16) which is then shifted by 16, resulting in 64424509440,
well above UINT_MAX.

Given that this is the only location in this driver where ISP_NVRAM_MASK
is shifted again, it seems likely that ISP_NVRAM_MASK was originally
defined without a shift and during the move of the shift to the
definition, this statement wasn't properly removed (since ISP_NVRAM_MASK
is used in the statenent right above this). Only the maintainers can
confirm this since this statment has been here since the driver was
first added to the kernel.

Link: https://github.com/ClangBuiltLinux/linux/issues/127
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-17 21:52:40 -07:00
David S. Miller
dc6d0f0b43 Merge branch 'geneve-vxlan-mtu'
Stefano Brivio says:

====================
geneve, vxlan: Don't set exceptions if skb->len < mtu

This series fixes the exception abuse described in 2/2, and 1/2
is just a preparatory change to make 2/2 less ugly.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-17 21:51:14 -07:00
Stefano Brivio
6b4f92af3d geneve, vxlan: Don't set exceptions if skb->len < mtu
We shouldn't abuse exceptions: if the destination MTU is already higher
than what we're transmitting, no exception should be created.

Fixes: 52a589d51f ("geneve: update skb dst pmtu on tx path")
Fixes: a93bf0ff44 ("vxlan: update skb dst pmtu on tx path")
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-17 21:51:13 -07:00