Commit graph

932,869 commits

Author SHA1 Message Date
Heiner Kallweit
c45d715065 net: phy: merge phy_start_aneg and phy_start_aneg_priv
After commit 9f2959b6b5 ("net: phy: improve handling delayed work")
the sync parameter isn't needed any longer in phy_start_aneg_priv().
This allows to merge phy_start_aneg() and phy_start_aneg_priv().

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-15 23:13:07 -07:00
Songjun Wu
965f22bc42
MIPS: dts: Change upper case to lower case
All the upper case in unit-address and hex constants are
changed to lower case according to the DT conventions.

Signed-off-by: Songjun Wu <songjun.wu@linux.intel.com>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Patchwork: https://patchwork.linux-mips.org/patch/20768/
Cc: yixin.zhu@linux.intel.com
Cc: chuanhua.lei@linux.intel.com
Cc: hauke.mehrtens@intel.com
Cc: devicetree@vger.kernel.org
Cc: James Hogan <jhogan@kernel.org>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Philippe Ombredanne <pombredanne@nexb.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Kate Stewart <kstewart@linuxfoundation.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
2018-10-15 23:11:15 -07:00
Alexandre Belloni
0e557a3e06
MIPS: generic: Add Network, SPI and I2C to ocelot_defconfig
Add support for the integrated switch, and the SPI and I2C controller found
on MSCC Ocelot.

Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Patchwork: https://patchwork.linux-mips.org/patch/20345/
Cc: James Hogan <jhogan@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-kernel@vger.kernel.org
Cc: linux-mips@linux-mips.org
2018-10-15 23:11:15 -07:00
Huacai Chen
360fe725f8
MIPS: Loongson-3: Fix BRIDGE irq delivery problem
After commit e509bd7da1 ("genirq: Allow migration of chained
interrupts by installing default action") Loongson-3 fails at here:

setup_irq(LOONGSON_HT1_IRQ, &cascade_irqaction);

This is because both chained_action and cascade_irqaction don't have
IRQF_SHARED flag. This will cause Loongson-3 resume fails because HPET
timer interrupt can't be delivered during S3. So we set the irqchip of
the chained irq to loongson_irq_chip which doesn't disable the chained
irq in CP0.Status.

Cc: stable@vger.kernel.org
Signed-off-by: Huacai Chen <chenhc@lemote.com>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Patchwork: https://patchwork.linux-mips.org/patch/20434/
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: James Hogan <jhogan@kernel.org>
Cc: linux-mips@linux-mips.org
Cc: Fuxin Zhang <zhangfx@lemote.com>
Cc: Zhangjin Wu <wuzhangjin@gmail.com>
Cc: Huacai Chen <chenhuacai@gmail.com>
2018-10-15 23:11:14 -07:00
Huacai Chen
d06f8a2f1b
MIPS: Loongson-3: Fix CPU UART irq delivery problem
Masking/unmasking the CPU UART irq in CP0_Status (and redirecting it to
other CPUs) may cause interrupts be lost, especially in multi-package
machines (Package-0's UART irq cannot be delivered to others). So make
mask_loongson_irq() and unmask_loongson_irq() be no-ops.

The original problem (UART IRQ may deliver to any core) is also because
of masking/unmasking the CPU UART irq in CP0_Status. So it is safe to
remove all of the stuff.

Signed-off-by: Huacai Chen <chenhc@lemote.com>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Patchwork: https://patchwork.linux-mips.org/patch/20433/
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: James Hogan <jhogan@kernel.org>
Cc: linux-mips@linux-mips.org
Cc: Fuxin Zhang <zhangfx@lemote.com>
Cc: Zhangjin Wu <wuzhangjin@gmail.com>
Cc: Huacai Chen <chenhuacai@gmail.com>
2018-10-15 23:11:14 -07:00
Paul Burton
7f8502a539
MIPS: Remove unused PREF, PREFE & PREFX macros
asm/asm.h provides PREF(), PREFE() & PREFX() macros which are now
entirely unused. Delete the dead code.

Signed-off-by: Paul Burton <paul.burton@mips.com>
Patchwork: https://patchwork.linux-mips.org/patch/20908/
Cc: linux-mips@linux-mips.org
2018-10-15 23:11:14 -07:00
Paul Burton
1d6fb222bd
MIPS: lib: Use kernel_pref & user_pref in memcpy()
memcpy() is the only user of the PREF() & PREFE() macros from asm/asm.h.
Switch to using the kernel_pref() & user_pref() macros from
asm/asm-eva.h which fit more consistently with other abstractions of EVA
vs non-EVA instructions.

Signed-off-by: Paul Burton <paul.burton@mips.com>
Patchwork: https://patchwork.linux-mips.org/patch/20907/
Cc: linux-mips@linux-mips.org
2018-10-15 23:11:14 -07:00
Paul Burton
e2b4054399
MIPS: Remove unused CAT macro
asm/asm.h provides a CAT macro which is unused throughout the tree, and
if anyone wanted it the generic CONCATENATE macro in linux/kernel.h
provides the same functionality. Delete the dead code.

Signed-off-by: Paul Burton <paul.burton@mips.com>
Patchwork: https://patchwork.linux-mips.org/patch/20905/
Cc: linux-mips@linux-mips.org
2018-10-15 23:11:13 -07:00
Paul Burton
4021c30a86
MIPS: Add kernel_pref & user_pref helpers
Add kernel_pref & user_pref macros to asm/asm-eva.h, providing an
abstraction around EVA & non-EVA pref instructions consistent with the
existing macros we have for cache & load/store instructions.

Signed-off-by: Paul Burton <paul.burton@mips.com>
Patchwork: https://patchwork.linux-mips.org/patch/20906/
Cc: linux-mips@linux-mips.org
2018-10-15 23:11:13 -07:00
Paul Burton
da1d25e79a
MIPS: Remove unused TTABLE macro
asm/asm.h contains a TTABLE macro to generate "text tables" which would
appear to be arrays of pointers to strings. It is unused throughout the
kernel tree, so delete the dead code.

Signed-off-by: Paul Burton <paul.burton@mips.com>
Patchwork: https://patchwork.linux-mips.org/patch/20904/
Cc: linux-mips@linux-mips.org
2018-10-15 23:11:13 -07:00
Paul Burton
fce362c7fc
MIPS: Remove unused PIC macros
asm/asm.h contains CPRESTORE, CPADD & CPLOAD macros that are intended
for use with position independent code, but are not used anywhere in the
kernel - along with a comment to that effect. Remove the dead code.

Signed-off-by: Paul Burton <paul.burton@mips.com>
Patchwork: https://patchwork.linux-mips.org/patch/20903/
Cc: linux-mips@linux-mips.org
2018-10-15 23:11:12 -07:00
Paul Burton
7b2d13f2e2
MIPS: Remove unused MOVN & MOVZ macros
We have macros in asm/asm.h to allow for use of the MOVN & MOVZ
instructions with compare-and-branch sequences providing compatibility
for ISA versions which don't include those instructions. However the
macros are unused, and appear to have always been unused. Delete the
dead code.

Signed-off-by: Paul Burton <paul.burton@mips.com>
Patchwork: https://patchwork.linux-mips.org/patch/20909/
Cc: linux-mips@linux-mips.org
2018-10-15 23:11:12 -07:00
Selvin Xavier
5df9509949 RDMA/bnxt_re: Avoid resource leak in case the NQ registration fails
In case the NQ alloc/enable fails, free up the already allocated/enabled
NQ before reporting failure. Also, track the alloc/enable using proper
state checking.

Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-10-16 00:03:51 -06:00
Selvin Xavier
a08b9e9a70 RDMA/bnxt_re: Wait for delayed work to finish before device removal
Delayed work bnxt_re_worker would be still running even after
cancel_delayed_work returns. This causes crash as the driver proceeds with
device removal. To make sure that the work is finished before returning,
use cancel_delayed_work_sync.

Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-10-16 00:03:51 -06:00
Devesh Sharma
854a202001 RDMA/bnxt_re: Limit max_pkey to 16 bit value
Some FW versios return pkey values more than 0xFFFF. pkey_tbl_len of
ib_port_attr is 16bit value. So restricting max_pkeys to 0xFFFF.

Signed-off-by: Devesh Sharma <devesh.sharma@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-10-16 00:03:51 -06:00
Devesh Sharma
4c01f2e3a9 RDMA/bnxt_re: Fix qp async event reporting
Reports affiliated async event on the qp-async event channel instead of
global event channel.

Signed-off-by: Devesh Sharma <devesh.sharma@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-10-16 00:03:50 -06:00
Selvin Xavier
316dd2825d RDMA/bnxt_re: Report out of sequence hw counters
Expose out of sequence errors received from FW.  This counter is a 32 bit
counter and driver has to accumulate the counter. Stores the previous
value for calculating the difference in the next query.

Also, update the HW statistics structure with new fields.

Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-10-16 00:03:50 -06:00
Selvin Xavier
5c80c9138e RDMA/bnxt_re: Expose rx discards and drop counters
Expose the RoCE discard and drop counters from the HW statistics context

Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-10-16 00:03:50 -06:00
Somnath Kotur
bb22c36cba RDMA/bnxt_re: Prevent driver crash due to NULL pointer in error message print
crsqe->resp would be NULL in case the host command timed out before
getting a response from HW. Check for NULL pointer to avoid a potential
crash while printing the error message.

Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-10-16 00:03:50 -06:00
Devesh Sharma
f2bd4d096e RDMA/bnxt_re: Drop L2 async events silently
In some FW versions, RoCE driver also receives an async notification which
was directed to L2 driver.  RoCE driver does not handle this and print a
message to syslog.  Drop these notifications silently.

Signed-off-by: Devesh Sharma <devesh.sharma@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-10-16 00:03:50 -06:00
Selvin Xavier
ed51efd2ce RDMA/bnxt_re: Avoid accessing nq->bar_reg_iomem in failure case
In the failure path, nq->bar_reg_iomem gets accessed without
initializing. Avoid this by calling the bnxt_qplib_nq_stop_irq only if the
initialization is complete.

Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Fixes: 1ac5a40479 ("RDMA/bnxt_re: Add bnxt_re RoCE driver")
Fixes: 6e04b10356 ("RDMA/bnxt_re: Fix broken RoCE driver due to recent L2 driver changes")
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-10-16 00:03:50 -06:00
Selvin Xavier
eae4ad1b0c RDMA/bnxt_re: Avoid NULL check after accessing the pointer
This is reported by smatch check.  rcfw->creq_bar_reg_iomem is accessed in
bnxt_qplib_rcfw_stop_irq and this variable check afterwards doesn't make
sense.  Also, rcfw->creq_bar_reg_iomem will never be NULL.  So Removing
this check.

Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Fixes: 6e04b10356 ("RDMA/bnxt_re: Fix broken RoCE driver due to recent L2 driver changes")
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-10-16 00:03:50 -06:00
Selvin Xavier
1b7042d7a5 RDMA/bnxt_re: Remove the unnecessary version macro definition
Version macro is not required as the driver is not maintaining the
version. Removing the references of this macro too.

Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-10-16 00:03:50 -06:00
Selvin Xavier
d455f29f6d RDMA/bnxt_re: Fix recursive lock warning in debug kernel
Fix possible recursive lock warning. Its a false warning as the locks are
part of two differnt HW Queue data structure - cmdq and creq. Debug kernel
is throwing the following warning and stack trace.

[  783.914967] ============================================
[  783.914970] WARNING: possible recursive locking detected
[  783.914973] 4.19.0-rc2+ #33 Not tainted
[  783.914976] --------------------------------------------
[  783.914979] swapper/2/0 is trying to acquire lock:
[  783.914982] 000000002aa3949d (&(&hwq->lock)->rlock){..-.}, at: bnxt_qplib_service_creq+0x232/0x350 [bnxt_re]
[  783.914999]
but task is already holding lock:
[  783.915002] 00000000be73920d (&(&hwq->lock)->rlock){..-.}, at: bnxt_qplib_service_creq+0x2a/0x350 [bnxt_re]
[  783.915013]
other info that might help us debug this:
[  783.915016]  Possible unsafe locking scenario:

[  783.915019]        CPU0
[  783.915021]        ----
[  783.915034]   lock(&(&hwq->lock)->rlock);
[  783.915035]   lock(&(&hwq->lock)->rlock);
[  783.915037]
 *** DEADLOCK ***

[  783.915038]  May be due to missing lock nesting notation

[  783.915039] 1 lock held by swapper/2/0:
[  783.915040]  #0: 00000000be73920d (&(&hwq->lock)->rlock){..-.}, at: bnxt_qplib_service_creq+0x2a/0x350 [bnxt_re]
[  783.915044]
stack backtrace:
[  783.915046] CPU: 2 PID: 0 Comm: swapper/2 Not tainted 4.19.0-rc2+ #33
[  783.915047] Hardware name: Dell Inc. PowerEdge R730/0599V5, BIOS 1.0.4 08/28/2014
[  783.915048] Call Trace:
[  783.915049]  <IRQ>
[  783.915054]  dump_stack+0x90/0xe3
[  783.915058]  __lock_acquire+0x106c/0x1080
[  783.915061]  ? sched_clock+0x5/0x10
[  783.915063]  lock_acquire+0xbd/0x1a0
[  783.915065]  ? bnxt_qplib_service_creq+0x232/0x350 [bnxt_re]
[  783.915069]  _raw_spin_lock_irqsave+0x4a/0x90
[  783.915071]  ? bnxt_qplib_service_creq+0x232/0x350 [bnxt_re]
[  783.915073]  bnxt_qplib_service_creq+0x232/0x350 [bnxt_re]
[  783.915078]  tasklet_action_common.isra.17+0x197/0x1b0
[  783.915081]  __do_softirq+0xcb/0x3a6
[  783.915084]  irq_exit+0xe9/0x100
[  783.915085]  do_IRQ+0x6a/0x120
[  783.915087]  common_interrupt+0xf/0xf
[  783.915088]  </IRQ>

Use nested notation for the spin_lock to avoid this warning.

Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-10-16 00:03:50 -06:00
Selvin Xavier
5a23e0b1dd RDMA/bnxt_re: Add missing spin lock initialization
Add the missing initalization of the cq_lock and qplib.flush_lock.

Fixes: 942c9b6ca8 ("RDMA/bnxt_re: Avoid Hard lockup during error CQE processing")
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-10-16 00:03:50 -06:00
Jason Gunthorpe
59bfc59a68 Merge branch 'for-rc' into rdma.git for-next
From git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma.git

This is required to resolve dependencies of the next series of RDMA
patches.

The code motion conflicts in drivers/infiniband/core/cache.c were
resolved.

Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-10-16 00:01:02 -06:00
Haiyang Zhang
0054795561 hv_netvsc: fix vf serial matching with pci slot info
The VF device's serial number is saved as a string in PCI slot's
kobj name, not the slot->number. This patch corrects the netvsc
driver, so the VF device can be successfully paired with synthetic
NIC.

Fixes: 00d7ddba11 ("hv_netvsc: pair VF based on serial number")
Reported-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Reviewed-by: Stephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-15 22:58:11 -07:00
David S. Miller
b13949678b Merge branch 'tcp-second-round-for-EDT-conversion'
Eric Dumazet says:

====================
tcp: second round for EDT conversion

First round of EDT patches left TCP stack in a non optimal state.

- High speed flows suffered from loss of performance, addressed
  by the first patch of this series.

- Second patch brings pacing to the current state of networking,
  since we now reach ~100 Gbit on a single TCP flow.

- Third patch implements a mitigation for scheduling delays,
  like the one we did in sch_fq in the past.

- Fourth patch removes one special case in sch_fq for ACK packets.

- Fifth patch removes a serious perfomance cost for TCP internal
  pacing. We should setup the high resolution timer only if
  really needed.

- Sixth patch fixes a typo in BBR.

- Last patch is one minor change in cdg congestion control.

Neal Cardwell also has a patch series fixing BBR after
EDT adoption.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-15 22:56:42 -07:00
Eric Dumazet
825e1c523d tcp: cdg: use tcp high resolution clock cache
We store in tcp socket a cache of most recent high resolution
clock, there is no need to call local_clock() again, since
this cache is good enough.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-15 22:56:42 -07:00
Neal Cardwell
97ec3eb33d tcp_bbr: fix typo in bbr_pacing_margin_percent
There was a typo in this parameter name.

Signed-off-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-15 22:56:42 -07:00
Eric Dumazet
864e5c0907 tcp: optimize tcp internal pacing
When TCP implements its own pacing (when no fq packet scheduler is used),
it is arming high resolution timer after a packet is sent.

But in many cases (like TCP_RR kind of workloads), this high resolution
timer expires before the application attempts to write the following
packet. This overhead also happens when the flow is ACK clocked and
cwnd limited instead of being limited by the pacing rate.

This leads to extra overhead (high number of IRQ)

Now tcp_wstamp_ns is reserved for the pacing timer only
(after commit "tcp: do not change tcp_wstamp_ns in tcp_mstamp_refresh"),
we can setup the timer only when a packet is about to be sent,
and if tcp_wstamp_ns is in the future.

This leads to a ~10% performance increase in TCP_RR workloads.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-15 22:56:42 -07:00
Eric Dumazet
7baf33bdac net_sched: sch_fq: no longer use skb_is_tcp_pure_ack()
With the new EDT model, sch_fq no longer has to special
case TCP pure acks, since their skb->tstamp will allow them
being sent without pacing delay.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-15 22:56:42 -07:00
Eric Dumazet
a7a2563064 tcp: mitigate scheduling jitter in EDT pacing model
In commit fefa569a9d ("net_sched: sch_fq: account for schedule/timers
drifts") we added a mitigation for scheduling jitter in fq packet scheduler.

This patch does the same in TCP stack, now it is using EDT model.

Note that this mitigation is valid for both external (fq packet scheduler)
or internal TCP pacing.

This uses the same strategy than the above commit, allowing
a time credit of half the packet currently sent.

Consider following case :

An skb is sent, after an idle period of 300 usec.
The air-time (skb->len/pacing_rate) is 500 usec
Instead of setting the pacing timer to now+500 usec,
it will use now+min(500/2, 300) -> now+250usec

This is like having a token bucket with a depth of half
an skb.

Tested:

tc qdisc replace dev eth0 root pfifo_fast

Before
netperf -P0 -H remote -- -q 1000000000 # 8000Mbit
540000 262144 262144    10.00    7710.43

After :
netperf -P0 -H remote -- -q 1000000000 # 8000 Mbit
540000 262144 262144    10.00    7999.75   # Much closer to 8000Mbit target

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-15 22:56:42 -07:00
Eric Dumazet
76a9ebe811 net: extend sk_pacing_rate to unsigned long
sk_pacing_rate has beed introduced as a u32 field in 2013,
effectively limiting per flow pacing to 34Gbit.

We believe it is time to allow TCP to pace high speed flows
on 64bit hosts, as we now can reach 100Gbit on one TCP flow.

This patch adds no cost for 32bit kernels.

The tcpi_pacing_rate and tcpi_max_pacing_rate were already
exported as 64bit, so iproute2/ss command require no changes.

Unfortunately the SO_MAX_PACING_RATE socket option will stay
32bit and we will need to add a new option to let applications
control high pacing rates.

State      Recv-Q Send-Q Local Address:Port             Peer Address:Port
ESTAB      0      1787144  10.246.9.76:49992             10.246.9.77:36741
                 timer:(on,003ms,0) ino:91863 sk:2 <->
 skmem:(r0,rb540000,t66440,tb2363904,f605944,w1822984,o0,bl0,d0)
 ts sack bbr wscale:8,8 rto:201 rtt:0.057/0.006 mss:1448
 rcvmss:536 advmss:1448
 cwnd:138 ssthresh:178 bytes_acked:256699822585 segs_out:177279177
 segs_in:3916318 data_segs_out:177279175
 bbr:(bw:31276.8Mbps,mrtt:0,pacing_gain:1.25,cwnd_gain:2)
 send 28045.5Mbps lastrcv:73333
 pacing_rate 38705.0Mbps delivery_rate 22997.6Mbps
 busy:73333ms unacked:135 retrans:0/157 rcv_space:14480
 notsent:2085120 minrtt:0.013

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-15 22:56:42 -07:00
Eric Dumazet
5f6188a800 tcp: do not change tcp_wstamp_ns in tcp_mstamp_refresh
In EDT design, I made the mistake of using tcp_wstamp_ns
to store the last tcp_clock_ns() sample and to store the
pacing virtual timer.

This causes major regressions at high speed flows.

Introduce tcp_clock_cache to store last tcp_clock_ns().
This is needed because some arches have slow high-resolution
kernel time service.

tcp_wstamp_ns is only updated when a packet is sent.

Note that we can remove tcp_mstamp in the future since
tcp_mstamp is essentially tcp_clock_cache/1000, so the
apparent socket size increase is temporary.

Fixes: 9799ccb0e9 ("tcp: add tcp_wstamp_ns socket field")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-15 22:56:41 -07:00
Xin Long
d805397c38 sctp: use the pmtu from the icmp packet to update transport pathmtu
Other than asoc pmtu sync from all transports, sctp_assoc_sync_pmtu
is also processing transport pmtu_pending by icmp packets. But it's
meaningless to use sctp_dst_mtu(t->dst) as new pmtu for a transport.

The right pmtu value should come from the icmp packet, and it would
be saved into transport->mtu_info in this patch and used later when
the pmtu sync happens in sctp_sendmsg_to_asoc or sctp_packet_config.

Besides, without this patch, as pmtu can only be updated correctly
when receiving a icmp packet and no place is holding sock lock, it
will take long time if the sock is busy with sending packets.

Note that it doesn't process transport->mtu_info in .release_cb(),
as there is no enough information for pmtu update, like for which
asoc or transport. It is not worth traversing all asocs to check
pmtu_pending. So unlike tcp, sctp does this in tx path, for which
mtu_info needs to be atomic_t.

Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-15 22:54:20 -07:00
Li RongQing
1a3aea2534 net: bridge: fix a possible memory leak in __vlan_add
After per-port vlan stats, vlan stats should be released
when fail to add vlan

Fixes: 9163a0fc1f ("net: bridge: add support for per-port vlan stats")
CC: bridge@lists.linux-foundation.org
cc: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
CC: Roopa Prabhu <roopa@cumulusnetworks.com>
Signed-off-by: Zhang Yu <zhangyu31@baidu.com>
Signed-off-by: Li RongQing <lirongqing@baidu.com>
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-15 22:53:52 -07:00
David Howells
bc0e7cf433 rxrpc: Add /proc/net/rxrpc/peers to display peer list
Add /proc/net/rxrpc/peers to display the list of peers currently active.

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-15 22:52:58 -07:00
Fugang Duan
ec20a63aa8 net: fec: don't dump RX FIFO register when not available
Commit db65f35f50 ("net: fec: add support of ethtool get_regs") introduce
ethool "--register-dump" interface to dump all FEC registers.

But not all silicon implementations of the Freescale FEC hardware module
have the FRBR (FIFO Receive Bound Register) and FRSR (FIFO Receive Start
Register) register, so we should not be trying to dump them on those that
don't.

To fix it we create a quirk flag, FEC_QUIRK_HAS_RFREG, and check it before
dump those RX FIFO registers.

Signed-off-by: Fugang Duan <fugang.duan@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-15 22:52:18 -07:00
Wei Yongjun
d275444cc3 fore200e: fix missing unlock on error in bsq_audit()
Add the missing unlock before return from function bsq_audit()
in the error handling case.

Fixes: 1d9d8be917 ("fore200e: check for dma mapping failures")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-15 22:48:35 -07:00
David S. Miller
65f2247d61 Merge branch 'bnxt_en-Add-support-for-new-57500-chips'
Michael Chan says:

====================
bnxt_en: Add support for new 57500 chips.

This patch-set is larger than normal because I wanted a complete series
to add basic support for the new 57500 chips.  The new chips have the
following main differences compared to legacy chips:

1. Requires the PF driver to allocate DMA context memory as a backing
store.
2. New NQ (notification queue) for interrupt events.
3. One or more CP rings can be associated with an NQ.
4. 64-bit doorbells.

Most other structures and firmware APIs are compatible with legacy
devices with some exceptions.  For example, ring groups are no longer
used and RSS table format has changed.

The patch-set includes the usual firmware spec. update, some refactoring
and restructuring, and adding the new code to add basic support for the
new class of devices.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-15 22:44:33 -07:00
Michael Chan
1ab968d2f1 bnxt_en: Add PCI ID for BCM57508 device.
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-15 22:44:33 -07:00
Michael Chan
0fcec9854a bnxt_en: Add new NAPI poll function for 57500 chips.
Add a new poll function that polls for NQ events.  If the NQ event is
a CQ notification, we locate the CP ring from the cq_handle and call
__bnxt_poll_work() to handle RX/TX events on the CP ring.

Add a new has_more_work field in struct bnxt_cp_ring_info to indicate
budget has been reached.  __bnxt_poll_cqs_done() is called to update or
ARM the CP rings if budget has not been reached or not.  If budget
has been reached, the next bnxt_poll_p5() call will continue to poll
from the CQ rings directly.  Otherwise, the NQ will be ARMed for the
next IRQ.

Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-15 22:44:33 -07:00
Michael Chan
3675b92fa7 bnxt_en: Refactor bnxt_poll_work().
Separate the CP ring polling logic in bnxt_poll_work() into 2 separate
functions __bnxt_poll_work() and __bnxt_poll_work_done().  Since the logic
is separated, we need to add tx_pkts and events fields to struct bnxt_napi
to keep track of the events to handle between the 2 functions.  We also
add had_work_done field to struct bnxt_cp_ring_info to indicate whether
some work was performed on the CP ring.

This is needed to better support the 57500 chips.  We need to poll up to
2 separate CP rings before we update or ARM the CP rings on the 57500 chips.

Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-15 22:44:33 -07:00
Michael Chan
58590c8d90 bnxt_en: Add coalescing setup for 57500 chips.
On legacy chips, the CP ring may be shared between RX and TX and so only
setup the RX coalescing parameters in such a case.  On 57500 chips, we
always have a dedicated CP ring for TX so we can always set up the
TX coalescing parameters in bnxt_hwrm_set_coal().

Also, the min_timer coalescing parameter applies to the NQ on the new
chips and a separate firmware call needs to be made to set it up.

Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-15 22:44:33 -07:00
Michael Chan
e44758b78a bnxt_en: Use bnxt_cp_ring_info struct pointer as parameter for RX path.
In the RX code path, we current use the bnxt_napi struct pointer to
identify the associated RX/CP rings.  Change it to use the struct
bnxt_cp_ring_info pointer instead since there are now up to 2
CP rings per MSIX.

Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-15 22:44:33 -07:00
Michael Chan
7b3af4f75b bnxt_en: Add RSS support for 57500 chips.
RSS context allocation and RSS indirection table setup are very different
on the new chip.  Refactor bnxt_setup_vnic() to call 2 different functions
to set up RSS for the vnic based on chip type.  On the new chip, the
number of RSS contexts and the indirection table size depends on the
number of RX rings.  Each indirection table entry is also different
on the new chip since ring groups are no longer used.

Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-15 22:44:32 -07:00
Michael Chan
44c6f72a4c bnxt_en: Increase RSS context array count and skip ring groups on 57500 chips.
On the new 57500 chips, we need to allocate one RSS context for every
64 RX rings.  In previous chips, only one RSS context per vnic is
required regardless of the number of RX rings.  So increase the max
RSS context array count to 8.

Hardware ring groups are not used on the new chips.  Note that the
software ring group structure is still maintained in the driver to
keep track of the rings associated with the vnic.

Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-15 22:44:32 -07:00
Michael Chan
3e08b1841b bnxt_en: Allocate/Free CP rings for 57500 series chips.
On the new 57500 chips, we allocate/free one CP ring for each RX ring or
TX ring separately.  Using separate CP rings for RX/TX is an improvement
as TX events will no longer be stuck behind RX events.

Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-15 22:44:32 -07:00
Michael Chan
23aefdd761 bnxt_en: Modify bnxt_ring_alloc_send_msg() to support 57500 chips.
Firmware ring allocation semantics are slightly different for most
ring types on 57500 chips.  Allocation/deallocation for NQ rings are
also added for the new chips.

A CP ring handle is also added so that from the NQ interrupt event,
we can locate the CP ring.

Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-15 22:44:32 -07:00