Commit graph

932,869 commits

Author SHA1 Message Date
Vasundhara Volam
3a1d52a54a bnxt_en: return proper error when FW returns HWRM_ERR_CODE_RESOURCE_ACCESS_DENIED
Return proper error code when Firmware returns
HWRM_ERR_CODE_RESOURCE_ACCESS_DENIED for HWRM_NVM_GET/SET_VARIABLE
commands.

Cc: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-04 13:49:43 -07:00
Vasundhara Volam
7d85923487 bnxt_en: Use ignore_ari devlink parameter
This patch adds support for ignore_ari generic permanent mode
devlink parameter. This parameter is disabled by default. It can be
enabled using devlink param commands.

ignore_ari - If enabled, device ignores ARI(Alternate Routing ID)
capability, even when platforms has the support and creates same number
of partitions when platform does not support ARI capability.

Cc: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-04 13:49:43 -07:00
Vasundhara Volam
16511789b9 devlink: Add generic parameter msix_vec_per_pf_min
msix_vec_per_pf_min - This param sets the number of minimal MSIX
vectors required for the device initialization. This value is set
in the device which limits MSIX vectors per PF.

Cc: Jiri Pirko <jiri@mellanox.com>
Cc: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-04 13:49:42 -07:00
Vasundhara Volam
f61cba4291 devlink: Add generic parameter msix_vec_per_pf_max
msix_vec_per_pf_max - This param sets the number of MSIX vectors
that the device requests from the host on driver initialization.
This value is set in the device which is applicable per PF.

Cc: Jiri Pirko <jiri@mellanox.com>
Cc: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-04 13:49:42 -07:00
Vasundhara Volam
e3b5106162 devlink: Add generic parameter ignore_ari
ignore_ari - Device ignores ARI(Alternate Routing ID) capability,
even when platforms has the support and creates same number of
partitions when platform does not support ARI capability.

Cc: Jiri Pirko <jiri@mellanox.com>
Cc: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-04 13:49:42 -07:00
David S. Miller
9e15ff7b89 Just three small fixes:
* fix use-after-free in regulatory code
  * fix rx-mgmt key flag in AP mode (mac80211)
  * fix wireless extensions compat code memory leak
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEH1e1rEeCd0AIMq6MB8qZga/fl8QFAlu2bEUACgkQB8qZga/f
 l8RAgw/7BfRpm3Kr7XW919naGkt/pQeJxUcuF9YggBpTCrp/DSLQYsjOBE5DyS/m
 728oPD8jEDehUHasWKsbG7wit1S7ImExCHTPim8C1mbABhbqdhwD4ceUvBO7RYi2
 p0+yN8X8z5D0qruMrNwhtxdE8iV9bBgmY6u1jubpJFkKLPf2euZyroH40b879CIn
 aHqB42GNJCdwO2UFaPDH2cdx5DFWrDlfA1LGbrbuzrXMBfNGWYgen2JJH/5iDOyU
 1rVXk/pUpVffp0Zde+66NtyCxxC0+hQwrTczEKXICb5qoWJpz6kugFGGO1oDQgdp
 AbM7KNrV712h/qwTEnC1NG0KUXgocpwWIuf/cuTow0vGUJSl+O2pLS/3GLOwH2du
 1u/FF4LiBc4NFXmWBPMN3LUN+Ica0/YWSbVwcv2c4guemV1EOGinlbFc+tnoue7M
 fpLkQJUYCiEVFRXGWVaSl0Hr6z+zwgfa8qHYN2yq1qyB0dYHryYiVhgKLV7yisCm
 RNy1hmVuV7rMsL3f4iUq/2xnL3U8qK1+19Mr+i58/kU4Tx2jMkWj0kivRdgYX4EN
 XcBhJzWXrb3yMldACrCji6iRnrFMqg7osyEgFiMLMl4cZfs057+qsrJyR5xajVOi
 Ws+hj3a1LukJ1nIhou4uOLAt9D7ohuJojQq6D2GLeBwfGPNkz4E=
 =QyWK
 -----END PGP SIGNATURE-----

Merge tag 'mac80211-for-davem-2018-10-04' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211

Johannes Berg says:

====================
Just three small fixes:
 * fix use-after-free in regulatory code
 * fix rx-mgmt key flag in AP mode (mac80211)
 * fix wireless extensions compat code memory leak
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-04 13:47:39 -07:00
Tejun Heo
479adb89a9 cgroup: Fix dom_cgrp propagation when enabling threaded mode
A cgroup which is already a threaded domain may be converted into a
threaded cgroup if the prerequisite conditions are met.  When this
happens, all threaded descendant should also have their ->dom_cgrp
updated to the new threaded domain cgroup.  Unfortunately, this
propagation was missing leading to the following failure.

  # cd /sys/fs/cgroup/unified
  # cat cgroup.subtree_control    # show that no controllers are enabled

  # mkdir -p mycgrp/a/b/c
  # echo threaded > mycgrp/a/b/cgroup.type

  At this point, the hierarchy looks as follows:

      mycgrp [d]
	  a [dt]
	      b [t]
		  c [inv]

  Now let's make node "a" threaded (and thus "mycgrp" s made "domain threaded"):

  # echo threaded > mycgrp/a/cgroup.type

  By this point, we now have a hierarchy that looks as follows:

      mycgrp [dt]
	  a [t]
	      b [t]
		  c [inv]

  But, when we try to convert the node "c" from "domain invalid" to
  "threaded", we get ENOTSUP on the write():

  # echo threaded > mycgrp/a/b/c/cgroup.type
  sh: echo: write error: Operation not supported

This patch fixes the problem by

* Moving the opencoded ->dom_cgrp save and restoration in
  cgroup_enable_threaded() into cgroup_{save|restore}_control() so
  that mulitple cgroups can be handled.

* Updating all threaded descendants' ->dom_cgrp to point to the new
  dom_cgrp when enabling threaded mode.

Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-and-tested-by: "Michael Kerrisk (man-pages)" <mtk.manpages@gmail.com>
Reported-by: Amin Jamali <ajamali@pivotal.io>
Reported-by: Joao De Almeida Pereira <jpereira@pivotal.io>
Link: https://lore.kernel.org/r/CAKgNAkhHYCMn74TCNiMJ=ccLd7DcmXSbvw3CbZ1YREeG7iJM5g@mail.gmail.com
Fixes: 454000adaa ("cgroup: introduce cgroup->dom_cgrp and threaded css_set handling")
Cc: stable@vger.kernel.org # v4.14+
2018-10-04 13:28:08 -07:00
Jacopo Mondi
cac0223c46 media: renesas-ceu: Use default mbus settings
As the v4l2-fwnode now allows drivers to set defaults, and eventually
override them by specifying properties in DTS, use defaults for the CEU
driver.

Also remove endpoint properties from the gr-peach-audiocamerashield as
they match the defaults now specified in the driver code
(h/vsync-active and bus-width) or are not relevant to the interface
as they cannot be configured (pclk-sample).

Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-10-04 16:25:33 -04:00
Jacopo Mondi
6a3da2e2a4 media: dt-bindings: media: renesas-ceu: Add more endpoint properties
As the v4l2-fwnode framework now allows specifying defaults configurations,
expand the description of the optional endpoint properties for the CEU
interface to better explain which are their defaults values.

Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-10-04 16:25:10 -04:00
Jacopo Mondi
59e7d51127 media: dt-bindings: media: renesas-ceu: Refer to video-interfaces.txt
Refer to video-interfaces.txt when describing standard properties.

Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-10-04 16:24:48 -04:00
Greg Kroah-Hartman
010bd965f9 overlayfs fixes for 4.19-rc7
-----BEGIN PGP SIGNATURE-----
 
 iHUEABYIAB0WIQSQHSd0lITzzeNWNm3h3BK/laaZPAUCW7YOCQAKCRDh3BK/laaZ
 PAmGAQC1/3+mkfHXqyDx+zv4f7A348ZULW26EWFWwMwlEljWowD+PlRFBgUu5v5c
 194mCApZU7hl6o0u07aijjz6m81e6QE=
 =dM89
 -----END PGP SIGNATURE-----

Merge tag 'ovl-fixes-4.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs

Miklos writes:
  "overlayfs fixes for 4.19-rc7

   This update fixes a couple of regressions in the stacked file update
   added in this cycle, as well as some older bugs uncovered by
   syzkaller.

   There's also one trivial naming change that touches other parts of
   the fs subsystem."

* tag 'ovl-fixes-4.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs:
  ovl: fix format of setxattr debug
  ovl: fix access beyond unterminated strings
  ovl: make symbol 'ovl_aops' static
  vfs: swap names of {do,vfs}_clone_file_range()
  ovl: fix freeze protection bypass in ovl_clone_file_range()
  ovl: fix freeze protection bypass in ovl_write_iter()
  ovl: fix memory leak on unlink of indexed file
2018-10-04 13:24:38 -07:00
Sakari Ailus
4a2d1dc51b media: smiapp: Query the V4L2 endpoint for a specific bus type
Instead of opportunistically trying to gather some information from the
V4L2 endpoint, set the bus type and let the V4L2 fwnode framework figure
out the configuration.

Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Tested-by: Steve Longerbeam <steve_longerbeam@mentor.com>
Tested-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-10-04 16:24:25 -04:00
Sakari Ailus
2e6e39324a media: v4l: fwnode: Update V4L2 fwnode endpoint parsing documentation
The semantics of v4l2_fwnode_endpoint_parse() and
v4l2_fwnode_endpoint_alloc_parse() have changed slightly: they now take
the bus type from the user as well as a default configuration for the bus
that shall reflect the DT binding defaults. Document this.

Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Tested-by: Steve Longerbeam <steve_longerbeam@mentor.com>
Tested-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-10-04 16:24:04 -04:00
Sakari Ailus
edc6d56c2e media: v4l: fwnode: Support parsing of CSI-2 C-PHY endpoints
The V4L2 fwnode framework only parsed CSI-2 D-PHY endpoints while C-PHY
support wasn't there. Also parse endpoints for media bus type
V4L2_MBUS_CSI2_CPHY.

Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Tested-by: Steve Longerbeam <steve_longerbeam@mentor.com>
Tested-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-10-04 16:23:34 -04:00
Sakari Ailus
e7b2f5185e media: v4l: fwnode: Use V4L2 fwnode endpoint media bus type if set
Use the given media bus type set by the caller. If none is given (i.e. the
mbus type is V4L2_MBUS_UNKNOWN, or 0), fall back to the old behaviour.
This is to obtain the information from the DT or try to guess the bus
type.

-ENXIO is returned if the caller sets the bus type but that does not match
with what's in DT. Also return -ENXIO if bus type detection failed to
separate this from the rest of the errors.

Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Tested-by: Steve Longerbeam <steve_longerbeam@mentor.com>
Tested-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-10-04 16:23:12 -04:00
Sakari Ailus
3eb32c264d media: v4l: fwnode: Print bus type
Print bus type either as set by the driver or as parsed from the bus-type
property, as well as the guessed V4L2 media bus type.

Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Tested-by: Steve Longerbeam <steve_longerbeam@mentor.com>
Tested-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-10-04 16:22:46 -04:00
Sakari Ailus
e9be1b863e media: v4l: fwnode: Use default parallel flags
The caller may provide default flags for the endpoint. Change the
configuration based on what is available through the fwnode property API.

Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Tested-by: Steve Longerbeam <steve_longerbeam@mentor.com>
Reviewed-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Tested-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-10-04 16:21:33 -04:00
Sakari Ailus
26c1126c9b media: v4l: fwnode: Use media bus type for bus parser selection
Use the media bus types instead of the fwnode bus types internally. This
is the interface to the drivers as well, making the use of the fwnode bus
types more localised to the V4L2 fwnode framework.

Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Tested-by: Steve Longerbeam <steve_longerbeam@mentor.com>
Tested-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-10-04 16:21:02 -04:00
Sakari Ailus
9a5b4b76f3 media: v4l: fwnode: Only zero the struct if bus type is set to V4L2_MBUS_UNKNOWN
In order to prepare for allowing drivers to set the defaults for a given
bus, make zeroing the struct conditional based on detecting the bus.
All callers now set the bus type to zero which allows only zeroing the
remaining bus union.

Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Tested-by: Steve Longerbeam <steve_longerbeam@mentor.com>
Tested-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-10-04 16:21:02 -04:00
Sakari Ailus
60359a28d5 media: v4l: fwnode: Initialise the V4L2 fwnode endpoints to zero
Initialise the V4L2 fwnode endpoints to zero in all drivers using
v4l2_fwnode_endpoint_parse(). This prepares for setting default endpoint
flags as well as the bus type. Setting bus type to zero will continue to
guess the bus among the guessable set (parallel, Bt.656 and CSI-2 D-PHY).

Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Tested-by: Steve Longerbeam <steve_longerbeam@mentor.com>
Tested-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-10-04 16:21:02 -04:00
Sakari Ailus
32593dd038 media: v4l: fwnode: Parse the graph endpoint as last
Parsing the graph endpoint is always successful; therefore parse it as
last.

Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Tested-by: Steve Longerbeam <steve_longerbeam@mentor.com>
Tested-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-10-04 16:14:42 -04:00
Sakari Ailus
b4357d21d6 media: v4l: fwnode: Support default CSI-2 lane mapping for drivers
Most hardware doesn't support re-mapping of the CSI-2 lanes. Especially
sensor drivers have a default number of lanes. Instead of requiring the
caller (the driver) to provide such a unit mapping, provide one if no
mapping is configured.

Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Tested-by: Steve Longerbeam <steve_longerbeam@mentor.com>
Tested-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-10-04 16:14:13 -04:00
Sakari Ailus
c2475aeb12 media: v4l: fwnode: Support driver-defined lane mapping defaults
Make use of the default CSI-2 lane mapping from caller-passed
configuration.

Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Tested-by: Steve Longerbeam <steve_longerbeam@mentor.com>
Tested-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-10-04 16:13:18 -04:00
Sakari Ailus
af11a74a04 media: v4l: fwnode: Only assign configuration if there is no error
Only assign endpoint configuration if the endpoint is parsed successfully.

Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Tested-by: Steve Longerbeam <steve_longerbeam@mentor.com>
Tested-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-10-04 16:12:39 -04:00
Sakari Ailus
276565ed7e media: v4l: fwnode: Read lane inversion information despite lane numbering
Read the lane inversion independently of whether the "data-lanes" property
exists. This makes sense since the caller may pass the number of lanes as
the default configuration while the lane inversion configuration may still
be available in firmware.

Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Tested-by: Steve Longerbeam <steve_longerbeam@mentor.com>
Tested-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-10-04 16:11:10 -04:00
Sakari Ailus
175b18b82d media: v4l: fwnode: Make use of newly specified bus types
Add support for parsing CSI-2 D-PHY, parallel or Bt.656 bus explicitly.

Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Tested-by: Steve Longerbeam <steve_longerbeam@mentor.com>
Reviewed-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Tested-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-10-04 16:10:18 -04:00
Sakari Ailus
2835b5b153 media: v4l: fwnode: Detect bus type correctly
In case the device supports multiple video bus types on an endpoint, the
V4L2 fwnode framework attempts to detect the type based on the available
information. This wasn't working really well, and sometimes could lead to
the V4L2 fwnode endpoint struct as being mishandled between the bus types.

Default to Bt.656 if no properties suggesting a bus type are found.

Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Tested-by: Steve Longerbeam <steve_longerbeam@mentor.com>
Tested-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-10-04 16:09:37 -04:00
Sakari Ailus
6970d37cc9 media: v4l: fwnode: Let the caller provide V4L2 fwnode endpoint
Instead of allocating the V4L2 fwnode endpoint in
v4l2_fwnode_endpoint_alloc_parse, let the caller to do this. This allows
setting default parameters for the endpoint which is a very common need
for drivers.

Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Tested-by: Steve Longerbeam <steve_longerbeam@mentor.com>
Tested-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-10-04 16:08:09 -04:00
Sakari Ailus
2d95e7ed07 media: v4l: mediabus: Recognise CSI-2 D-PHY and C-PHY
The CSI-2 bus may use either D-PHY or C-PHY. Make this visible in media
bus enum.

Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Tested-by: Steve Longerbeam <steve_longerbeam@mentor.com>
Tested-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-10-04 16:06:15 -04:00
Sakari Ailus
bf63856a48 media: v4l: fwnode: Add definitions for CSI-2 D-PHY, parallel and Bt.656 busses
Add definitions corresponding to DT bindings to the CSI-2 D-PHY, parallel
and Bt.656 busses.

Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Tested-by: Steve Longerbeam <steve_longerbeam@mentor.com>
Tested-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-10-04 16:05:00 -04:00
Sakari Ailus
7e84dd0b15 media: dt-bindings: media: Specify bus type for MIPI D-PHY, others, explicitly
Allow specifying the bus type explicitly for MIPI D-PHY, parallel and
Bt.656 busses. This is useful for devices that can make use of different
bus types. There are CSI-2 transmitters and receivers but the PHY
selection needs to be made between C-PHY and D-PHY; many devices also
support parallel and Bt.656 interfaces but the means to pass that
information to software wasn't there.

Autodetection (value 0) is removed as an option as the property could be
simply omitted in that case.

Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-10-04 16:04:01 -04:00
Sakari Ailus
d486532613 media: v4l: fwnode: The CSI-2 clock is continuous if it's not non-continuous
The continuous clock flag was only set if there was a clock or data lanes.
This isn't needed as such a configuration is invalid to begin with. Always
set the continuous clock flag if the non-continuous property is not found.

Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Tested-by: Steve Longerbeam <steve_longerbeam@mentor.com>
Tested-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-10-04 16:03:19 -04:00
Sakari Ailus
106ee387f6 media: v4l: fwnode: Use fwnode_graph_for_each_endpoint
Use fwnode_graph_for_each_endpoint iterator for better readability.

Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Tested-by: Steve Longerbeam <steve_longerbeam@mentor.com>
Tested-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-10-04 16:02:00 -04:00
Sakari Ailus
c8677aafb8 media: v4l: fwnode: Add debug prints for V4L2 endpoint property parsing
Print debug info as standard V4L2 endpoint are parsed.

Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Tested-by: Steve Longerbeam <steve_longerbeam@mentor.com>
Tested-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-10-04 16:01:35 -04:00
Steve Longerbeam
c4a570179c media: v4l2-subdev.rst: Update doc regarding subdev descriptors
Update the doc to describe the new method of adding subdevice
descriptors to async notifiers.

Signed-off-by: Steve Longerbeam <slongerbeam@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-10-04 16:00:20 -04:00
Steve Longerbeam
66beb323e4 media: v4l2: async: Remove notifier subdevs array
All platform drivers have been converted to use
v4l2_async_notifier_add_subdev(), in place of adding
asd's to the notifier subdevs array. So the subdevs
array can now be removed from struct v4l2_async_notifier,
and remove the backward compatibility support for that
array in v4l2-async.c.

Signed-off-by: Steve Longerbeam <slongerbeam@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-10-04 15:59:21 -04:00
Steve Longerbeam
d079f94c90 media: platform: Switch to v4l2_async_notifier_add_subdev
Switch all media platform drivers to call v4l2_async_notifier_add_subdev()
to add asd's to a notifier, in place of referencing the notifier->subdevs[]
array. These drivers also must now call v4l2_async_notifier_init() before
adding asd's to their notifiers.

There may still be cases where a platform driver maintains a list of
asd's that is a duplicate of the notifier asd_list, in which case its
possible the platform driver list can be removed, and can reference the
notifier asd_list instead. One example of where a duplicate list has
been removed in this patch is xilinx-vipp.c. If there are such cases
remaining, those drivers should be optimized to remove the duplicate
platform driver asd lists.

None of the changes to the platform drivers in this patch have been
tested. Verify that the async subdevices needed by the platform are
bound at load time, and that the driver unloads and reloads correctly
with no memory leaking of asd objects.

Suggested-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Steve Longerbeam <slongerbeam@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-10-04 15:55:38 -04:00
Steve Longerbeam
d5099f8180 media: staging/imx: TODO: Remove one assumption about OF graph parsing
The move to subdev notifiers fixes one assumption of OF graph parsing.
If a subdevice has non-video related ports, the subdev driver knows not
to follow those ports when adding remote devices to its subdev notifier.

Signed-off-by: Steve Longerbeam <slongerbeam@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-10-04 15:41:15 -04:00
Steve Longerbeam
b803cd3598 media: staging/imx: Switch to v4l2_async_notifier_add_*_subdev
Switch to v4l2_async_notifier_add_*_subdev() when adding async subdevs
to the imx-media root notifier. This removes the need to check for
an already added asd, since v4l2_async_notifier_add_*_subdev() does this
check. Also no need to allocate a subdevs array when registering the
root notifier, or keeping an internal master asd_list, since this is
moved to the notifier's asd_list.

Signed-off-by: Steve Longerbeam <slongerbeam@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-10-04 15:39:36 -04:00
Steve Longerbeam
11e005f20f media: staging/imx: Rename root notifier
Rename the imx-media root async notifier from "subdev_notifier" to
simply "notifier", so as not to confuse it with true subdev notifiers.
No functional changes.

Signed-off-by: Steve Longerbeam <slongerbeam@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-10-04 15:38:26 -04:00
Steve Longerbeam
1488c3cf4f media: staging/imx: Loop through all registered subdevs for media links
The root imx-media notifier no longer sees all bound subdevices because
some of them will be bound to subdev notifiers. So imx_media_create_links()
now needs to loop through all subdevices registered with the v4l2-device,
not just the ones in the root notifier's done list. This should be safe
because imx_media_create_of_links() checks if a fwnode link already
exists before creating.

Signed-off-by: Steve Longerbeam <slongerbeam@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-10-04 15:37:40 -04:00
Steve Longerbeam
2171178704 media: staging/imx: of: Remove recursive graph walk
After moving to subdev notifiers, it's no longer necessary to recursively
walk the OF graph, because the subdev notifiers will discover and add
devices from the graph for us.

So the recursive of_parse_subdev() function is gone, replaced with
of_add_csi() which adds only the CSI port fwnodes to the imx-media
root notifier.

Signed-off-by: Steve Longerbeam <slongerbeam@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-10-04 15:37:15 -04:00
Steve Longerbeam
c5040f1b71 media: imx: mipi csi-2: Register a subdev notifier
Parse neighbor remote devices on the MIPI CSI-2 input port, add
them to a subdev notifier, and register the subdev notifier for the
MIPI CSI-2 receiver, by calling v4l2_async_register_fwnode_subdev().

csi2_parse_endpoints() is modified to be the parse_endpoint callback.

Signed-off-by: Steve Longerbeam <slongerbeam@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-10-04 15:36:38 -04:00
Steve Longerbeam
c893500a16 media: imx: csi: Register a subdev notifier
Parse neighbor remote devices on the CSI port, and add them to a subdev
notifier, by calling v4l2_async_notifier_parse_fwnode_endpoints_by_port()
using the CSI's port id. And register the subdev notifier for the CSI.

Signed-off-by: Steve Longerbeam <slongerbeam@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-10-04 15:35:56 -04:00
Steve Longerbeam
c5afc789bf media: platform: video-mux: Register a subdev notifier
Parse neighbor remote devices on the video muxes input ports, add them to a
subdev notifier, and register the subdev notifier for the video mux, by
calling v4l2_async_register_fwnode_subdev().

Signed-off-by: Steve Longerbeam <slongerbeam@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-10-04 15:35:08 -04:00
Steve Longerbeam
1634f0eded media: v4l2-fwnode: Add a convenience function for registering subdevs with notifiers
Adds v4l2_async_register_fwnode_subdev(), which is a convenience function
for parsing a sub-device's fwnode port endpoints for connected remote
sub-devices, registering a sub-device notifier, and then registering
the sub-device itself.

Signed-off-by: Steve Longerbeam <slongerbeam@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-10-04 15:34:24 -04:00
Steve Longerbeam
eae2aed1ea media: v4l2-fwnode: Switch to v4l2_async_notifier_add_subdev
The fwnode endpoint and reference parsing functions in v4l2-fwnode.c
are modified to make use of v4l2_async_notifier_add_subdev().
As a result the notifier->subdevs array is no longer allocated or
re-allocated, and by extension the max_subdevs value is also no
longer needed.

Callers of the fwnode endpoint and reference parsing functions must now
first initialize the notifier with a call to v4l2_async_notifier_init().
This includes the function v4l2_async_register_subdev_sensor_common(),
and the intel-ipu3, omap3isp, and rcar-vin drivers.

Since the notifier->subdevs array is no longer allocated in the
fwnode endpoint and reference parsing functions, the callers of
those functions must never reference that array, since it is now
NULL. Of the drivers that make use of the fwnode/ref parsing,
only the intel-ipu3 driver references the ->subdevs[] array,
(in the notifier completion callback), so that driver has been
modified to iterate through the notifier->asd_list instead.

Signed-off-by: Steve Longerbeam <slongerbeam@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-10-04 15:33:09 -04:00
Michael Pobega
d153135e93 ALSA: hda/sigmatel - Disable automute for Elo VuPoint
The Elo VuPoint 15MX has two headphone jacks of which neither work by
default. Disabling automute allows ALSA to work normally with the
speakers & left headphone jack.

Future pin configuration changes may be required in the future to get
the right headphone jack working in tandem.

Signed-off-by: Michael Pobega <mpobega@neverware.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-10-04 21:22:47 +02:00
Mike Snitzer
5d07384a66 dm cache: fix resize crash if user doesn't reload cache table
A reload of the cache's DM table is needed during resize because
otherwise a crash will occur when attempting to access smq policy
entries associated with the portion of the cache that was recently
extended.

The reason is cache-size based data structures in the policy will not be
resized, the only way to safely extend the cache is to allow for a
proper cache policy initialization that occurs when the cache table is
loaded.  For example the smq policy's space_init(), init_allocator(),
calc_hotspot_params() must be sized based on the extended cache size.

The fix for this is to disallow cache resizes of this pattern:
1) suspend "cache" target's device
2) resize the fast device used for the cache
3) resume "cache" target's device

Instead, the last step must be a full reload of the cache's DM table.

Fixes: 66a636356 ("dm cache: add stochastic-multi-queue (smq) policy")
Cc: stable@vger.kernel.org
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2018-10-04 15:20:52 -04:00
Joe Thornber
4561ffca88 dm cache metadata: ignore hints array being too small during resize
Commit fd2fa9541 ("dm cache metadata: save in-core policy_hint_size to
on-disk superblock") enabled previously written policy hints to be
used after a cache is reactivated.  But in doing so the cache
metadata's hint array was left exposed to out of bounds access because
on resize the metadata's on-disk hint array wasn't ever extended.

Fix this by ignoring that there are no on-disk hints associated with the
newly added cache blocks.  An expanded on-disk hint array is later
rewritten upon the next clean shutdown of the cache.

Fixes: fd2fa9541 ("dm cache metadata: save in-core policy_hint_size to on-disk superblock")
Cc: stable@vger.kernel.org
Signed-off-by: Joe Thornber <ejt@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2018-10-04 15:20:51 -04:00