Commit graph

932,869 commits

Author SHA1 Message Date
Jason A. Donenfeld
8e2649d00a ARM: support big-endian for the virt architecture
This architecture, used for running in QEMU, runs just fine when
compiled in big-endian mode. So enable it. This is enabled in exactly
the same way that it is for other platforms (such as vexpress) that also
support big-endian mode in QEMU successfully.

Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2018-09-28 17:46:11 +02:00
Arnd Bergmann
83d52cd0dc Renesas ARM Based SoC DT Bindings Updates for v4.20
* Document bindings for:
   - RZ/G2E (r8a774c0), RZ/G2M (r8a774a1) and RZ/A2 (r7s9210) SoCs
   - R-Car M3-N (r8a77965) SoC based ULCB board
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEE4nzZofWswv9L/nKF189kaWo3T74FAlut/ZQACgkQ189kaWo3
 T74TLQ/6A4qZth4AK5+C425vIj3mdypRbiNMif0tt2SAEUXG/pKTHiGHFJOHwTqg
 l1rHKYkWXF6FZmAvLLkI3VqRcMTa6jACXsUeODMHXuCC53vnOY4BgLT+pieZjTyg
 JqTIFisoczaQsVGvA8C2YnsYtbAvYlP1MUr6NxbWCEdXfGT5pD8eUldER8T1T56j
 C+p3IDvWQCTZpj0ZefyGo0Blt9XdZ+SdwyeC0m+h+aH84odXS3JAhLo7BoD725WM
 k4Sni886rxloplXSHKizU+wBeebBhfwmiClFUqELLc/nXxklGzia4OK/Cs17LHMG
 sMEUdnV7JM8oq+1MkjOPuyJnwoXzMk+X5kTqWGhT2NHHWZCVHX+CajPQMxFmjIRl
 tRe2kREooYdbU49YorOx6hMnolqO9D/52759yfAbkSL+gDBnIcdxEVQgpwiYtivy
 WGH6CvM1yhtlYON8GbbC+V9RqffGfLrzeMzAka9MyKQ2NnQrySmbw+DtJ4BtKOqP
 iGyR3P+ulQhQPGFO1xbP7fh4Zpx/NtVRyrD/G7p95vUoc5vj0s+hdkk3QZ4Cy9ve
 yjhD7t36QSk/J8/EoO50HMkR245U9BVFFyRJJXanwB02+Rmy+H+aAkLB9LH0VQ4r
 01YweUYFnDw8mneZ7k4Trp8ZRfrCZI9Hnvlc+RgAjDT0WRHtWx4=
 =vffX
 -----END PGP SIGNATURE-----

Merge tag 'renesas-dt-bindings-for-v4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/dt

Renesas ARM Based SoC DT Bindings Updates for v4.20

* Document bindings for:
  - RZ/G2E (r8a774c0), RZ/G2M (r8a774a1) and RZ/A2 (r7s9210) SoCs
  - R-Car M3-N (r8a77965) SoC based ULCB board

* tag 'renesas-dt-bindings-for-v4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
  dt-bindings: arm: Document RZ/G2E SoC DT bindings
  dt-bindings: arm: Document Renesas R-Car M3-N-based ULCB board
  dt-bindings: arm: Document RZ/A2 SoC DT bindings
  dt-bindings: arm: Document RZ/G2M SoC DT bindings

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2018-09-28 17:44:56 +02:00
Marek Szyprowski
1b09d9c232 mmc: slot-gpio: Fix debounce time to use miliseconds again
The debounce value passed to mmc_gpiod_request_cd() function is in
microseconds, but msecs_to_jiffies() requires the value to be in
miliseconds to properly calculate the delay, so adjust the value stored
in cd_debounce_delay_ms context entry.

Fixes: 1d71926bbd ("mmc: core: Fix debounce time to use microseconds")
Fixes: bfd694d5e2 ("mmc: core: Add tunable delay before detecting card
after card is inserted")
Cc: stable@vger.kernel.org # v4.18+
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2018-09-28 17:43:48 +02:00
Arnd Bergmann
5280508e01 Second Round of Renesas ARM Based SoC DT Updates for v4.20
* RZ/G1M (r8a7743) based iWave G20D-Q7 board and camera daughter board
   - Move PCIe node out of common dtsi to allow reuse of the common dtsi
     on the iWave RZ/G1N board
 * RZ/G1C (r8a77470) SoC: Add I2C4, SDHI2 and SMP support
 * R-Car Gen1 based boards and R-Car Gen2 SoCs:
   - Enhance top-of-file comments to include SoC name
 * RZ/N1D (r9a06g032) SoC:
   - Correct UART0 description and add all other UARTs
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEE4nzZofWswv9L/nKF189kaWo3T74FAlut51oACgkQ189kaWo3
 T77BKg//fhxvkarcATUM+l5hImWpPqAs2J6/+ymR2tsmY6ei8mWlKKdqHP5TCQUe
 nYev93hjOP+MUmMv5Wlgz3Ql6BPyci0nzNGGp53EgADB8ku8olFDXPxykhi3InXc
 MYndvUK/hTMdxP20B0Z+ALbfCWccBO7CnT2La+hHS2IkMGHwiOmYj+rXYneX29yA
 vUgDY7tzg4qHHUjzWpaCtZxo7P3sD1HPFF5dxel6k8ua2gmYIhZ2NEUQTCBofMSl
 186C6KN6x8YnAR3goWf4a1JgzPBlX5U8NZXBOiPgxl8kbxJniXLWtGFs323BK8Sz
 09ilSM4w//HWxDK8n9LxIxzMyrMiXblQA4JPdp1q913f6xePryEEYbV2/tPI0XMM
 iCnZNfkjqUE5ykADcQmNiWrZTbwxFvpT2L8YW1xspQK8yOEgy9yN/Y12Y7yWQ7jy
 dbEVIcxsEm4ccTOed8v5u5SILxujMLhpwUgSvUBIVIPrxAbiO/b/AckykloXX4ej
 TbNHig0TnurnDx0XBMDYcOrVnIEtNycEOiU/Dxp+uk5TxjXnTdcEMh7oCNemjm0r
 ybU56U0XrMNzjVcEwLR44wCp8TPOqL4lvEXuOAgrN0biyaUWInq5NrSlHKJT667R
 7zNtd/TVONUKVZm/xF7p6JGRSlazb9lDkVl9iCO8MBCvPZhGd9Q=
 =xv5S
 -----END PGP SIGNATURE-----

Merge tag 'renesas-arm-dt2-for-v4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/dt

Second Round of Renesas ARM Based SoC DT Updates for v4.20

* RZ/G1M (r8a7743) based iWave G20D-Q7 board and camera daughter board
  - Move PCIe node out of common dtsi to allow reuse of the common dtsi
    on the iWave RZ/G1N board
* RZ/G1C (r8a77470) SoC: Add I2C4, SDHI2 and SMP support
* R-Car Gen1 based boards and R-Car Gen2 SoCs:
  - Enhance top-of-file comments to include SoC name
* RZ/N1D (r9a06g032) SoC:
  - Correct UART0 description and add all other UARTs

* tag 'renesas-arm-dt2-for-v4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
  ARM: dts: iwg20d-q7-common: Move pciec node out of common dtsi
  ARM: dts: r8a77470: Add I2C4 support
  ARM: dts: r8a77470: Add SDHI2 support
  ARM: dts: r8a77470: Add SMP support
  ARM: dts: R-Car Gen1 board comment update
  ARM: dts: Include R-Car Gen2 product name in DTSI files
  ARM: dts: r9a06g032: Correct UART and add all other UARTs

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2018-09-28 17:43:21 +02:00
Arnd Bergmann
0526b92e3a Second Round of Renesas ARM64 Based SoC DT Updates for v4.20
* Remove unneeded status from thermal nodes
 
 * R-Car Gen 3 SoCs:
   - Use 400kHz for I2C DVFS bus
   - Revise USB2.0 properties
 * R-Car Gen 3 SoC based ULCB boards: Add default bootargs
 * R-Car M3-N (r8a77965) SoC based boards: Enable audio with DMA
 
 * R-Car V3M (r8a77970 and V3H (r8a77980) SoCs:
   - Add compare match timer (CMT) support
   - Add timer pulse unit (TPU) support
 * R-Car V3H (r8a77980) and E3 (r8a77990) SoCs:
   - Attach the SYS-DMAC to the IPMMU
 * E3 (r8a77990) SoC: Add display output support
 * R-Car E3 (r8a77990) based Ebisu board:
   - Enable HDMI and CVBS input, and VGA and HDMI display output
 
 * R-Car D3 (r8a77995) SoC: Add LVDS support
 * R-Car D3 (r8a77995) based Draak board: Enable HDMI display output
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEE4nzZofWswv9L/nKF189kaWo3T74FAlut7W8ACgkQ189kaWo3
 T74zRA//a6osGbI8tUgygPvuLm1gTySaZWroRZxLdSQ0h41moC3AnHqUnzkzUMoa
 jlSKA+1yjloIRgP3XTUBWIMZST15eFjGW3KkLNbdzvRi0WMzANmbkGD67X4QOZ1T
 pVXWeS9RCHoFihThY5uKSMoOGJPFhHnjXB955gJ2UIfo+Rk+oBNttVfgUgnD6Nn9
 Ye1nWhPzh2+LeOfPzR7KNtg5blLhhlaPuSveadiM92MCahXKipbWNr7uoudBcUiL
 Mgq6NaiPOgdPPgPSNlJHFpxopIwSmrMsZ1WYOq4HSXjxcvRBp83fTSA2xSvWlO4P
 YcICzHtgjmwiNcChIUdaRTCpe3YcDzA10XlJGrTiBAHMRYc7YMUgI1pnPedlkVt5
 tF9tfXY7cKXSucmT0rAR6pmulJvPfXMTcuhCbVBzZj2vaJ2Eg2xXVjJUAe9F7LXT
 UOdc5Y+S66HpF3yQSVG7uZ8V0w1NjjEO0QIwyokhD13hKL6kYNims0vqRoBcHSzK
 +gpi8XXHT7E9nW0J+qFFaO9SUgxbK9+xSYl3BNeNPrnBK9iHA0WNVJCRcde8OB9D
 klD2w4FpEfG8cmvTelSYmoQ8itthU0XwU8qCGxZ2HITuFMaf4Gu9JepQB8Y/O0zl
 hZlZdY4kn3dP9mfxZUVANGP5DrFYFXa3ppI+N+pfumhTXwDVZsQ=
 =QtD1
 -----END PGP SIGNATURE-----

Merge tag 'renesas-arm64-dt2-for-v4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/dt

Second Round of Renesas ARM64 Based SoC DT Updates for v4.20

* Remove unneeded status from thermal nodes

* R-Car Gen 3 SoCs:
  - Use 400kHz for I2C DVFS bus
  - Revise USB2.0 properties
* R-Car Gen 3 SoC based ULCB boards: Add default bootargs
* R-Car M3-N (r8a77965) SoC based boards: Enable audio with DMA

* R-Car V3M (r8a77970 and V3H (r8a77980) SoCs:
  - Add compare match timer (CMT) support
  - Add timer pulse unit (TPU) support
* R-Car V3H (r8a77980) and E3 (r8a77990) SoCs:
  - Attach the SYS-DMAC to the IPMMU
* E3 (r8a77990) SoC: Add display output support
* R-Car E3 (r8a77990) based Ebisu board:
  - Enable HDMI and CVBS input, and VGA and HDMI display output

* R-Car D3 (r8a77995) SoC: Add LVDS support
* R-Car D3 (r8a77995) based Draak board: Enable HDMI display output

* tag 'renesas-arm64-dt2-for-v4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
  arm64: dts: renesas: r8a77965: Add Sound and Audio DMAC device nodes
  arm64: dts: renesas: r8a77995: draak: Enable HDMI display output
  arm64: dts: renesas: r8a77990: ebisu: Enable VGA and HDMI outputs
  arm64: dts: renesas: r8a77995: Add LVDS support
  arm64: dts: renesas: r8a77990: Add display output support
  arm64: dts: renesas: r8a779{7|8}0: add TPU support
  arm64: dts: renesas: revise properties for R-Car Gen3 SoCs' usb 2.0
  arm64: dts: renesas: ulcb: add default bootargs
  arm64: dts: renesas: r8a779{7|8}0: add CMT support
  arm64: dts: renesas: gen3: use 400kHz for I2C DVFS bus
  arm64: dts: renesas: r8a77980: Attach the SYS-DMAC to the IPMMU
  arm64: dts: renesas: r8a77990: Attach the SYS-DMAC to the IPMMU
  arm64: dts: renesas: ebisu: Add HDMI and CVBS input
  arm64: dts: renesas: Remove unneeded status from thermal nodes

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2018-09-28 17:42:26 +02:00
Jens Axboe
133424a207 Merge branch 'nvme-4.19' of git://git.infradead.org/nvme into for-linus
Pull NVMe fix from Christoph.

* 'nvme-4.19' of git://git.infradead.org/nvme:
  nvme: properly propagate errors in nvme_mpath_init
2018-09-28 09:41:40 -06:00
Arnd Bergmann
f62309c873 arm64: tegra: Device tree changes for v4.20-rc1
This contains mostly device tree changes to support faster SDHCI modes
 on Tegra210 and Tegra186.
 -----BEGIN PGP SIGNATURE-----
 
 iQJHBAABCAAxFiEEiOrDCAFJzPfAjcif3SOs138+s6EFAlutRCATHHRyZWRpbmdA
 bnZpZGlhLmNvbQAKCRDdI6zXfz6zoaEeD/9u+1Pv4ygX1eGlBCYoYDLNnzo+Eckn
 KiZzrBnK5Wxl6X/SagxQBOK8QmzTJrIAWo0oRBcUknBWKKlP7xdM4DKHnWhWHvZZ
 d7ulULfWDEaqcLXnlf5LH8XzrkG3UON/AA9IkAkx9jXwv7ipZVzDBN7kiLNBpZbU
 BPra4HRWAw2H7umDC0STSnfQoyvJ0zidk86xEWHNRTkjaQvPjuz7GmKWcgsM6cFv
 mh7ZdCqNYrW09D8CJwaCiSHx5DIVUyfoK9+BWxYyiYe2hOxZJHybVdOWZbjvg2K3
 nD+tsV2/Ej9JUrBuxTz12IQ4Wpz/PQqkXTs3RBfzvh08+4tu20dWyt/Rj9LY5hWE
 R0P4RD3LOMGlycAFiSm30cRQPieYqScHsYsW6FKlE42W/4gyABgItv+nfrIVtBUd
 jg1XlDINhLcVTobKQAztssaPKm0iUbABrfCqccIdBSfSGIUSpxUsSlggmBYs11U+
 +Yj20ObJgKvgY/1/t3VoIOYiSZ3foUq1ykqib1nVS84JJRPYVSMPy6cMu62tLT17
 lyGP9SV/k5KuSrVyGyxtYiDrvWbXb+y4+4+5G3VepFkAo6CCf7GPYl92ZfAFMdGH
 h4IV7nZb3SLxgp7J1KtGXwblegOtt/nEWn4WqtKZiLYukKd1kdZ4wZDQx1lpb40s
 PCZzQrYnEKS/0w==
 =DHnl
 -----END PGP SIGNATURE-----

Merge tag 'tegra-for-4.20-arm64-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/dt

arm64: tegra: Device tree changes for v4.20-rc1

This contains mostly device tree changes to support faster SDHCI modes
on Tegra210 and Tegra186.

* tag 'tegra-for-4.20-arm64-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
  arm64: tegra: I2C on Tegra194 is not compatible with Tegra114
  arm64: dts: tegra186: Enable HS400
  arm64: dts: tegra210: Enable HS400
  arm64: dts: tegra186: Add SDMMC4 DQS trim value
  arm64: dts: tegra210: Add SDMMC4 DQS trim value
  arm64: dts: tegra186: Assign clocks for sdmmc1 and sdmmc4
  arm64: dts: tegra210: Assign clocks for sdmmc1 and sdmmc4
  arm64: dts: tegra186: Add SDHCI tap and trim values
  arm64: dts: tegra210: Add SDHCI tap and trim values
  arm64: dts: tegra186: Add sdmmc pad auto calibration offsets
  arm64: dts: tegra210: Add sdmmc pad auto calibration offsets
  arm64: dts: tegra210-p2597: Remove no-1-8-v from sdmmc1
  arm64: dts: tegra210-p2180: Correct sdmmc4 vqmmc-supply
  arm64: dts: tegra210-p2180: Allow ldo2 to go down to 1.8 V
  arm64: dts: Add Tegra186 sdmmc pinctrl voltage states
  arm64: dts: Add Tegra210 sdmmc pinctrl voltage states

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2018-09-28 17:41:26 +02:00
Juergen Gross
6c76786740 xen/blkfront: correct purging of persistent grants
Commit a46b53672b ("xen/blkfront: cleanup
stale persistent grants") introduced a regression as purged persistent
grants were not pu into the list of free grants again. Correct that.

Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-09-28 09:40:39 -06:00
Jens Axboe
15c2068876 Revert "xen/blkfront: When purging persistent grants, keep them in the buffer"
Fix didn't work for all cases, reverting to add a (hopefully)
better fix.

This reverts commit f151ba989d.

Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-09-28 09:40:17 -06:00
Arnd Bergmann
d4db2b19eb ARM: tegra: Device tree changes for v4.20-rc1
This contains a massive amount of changes from Marcel Ziswiler for
 various boards by Toradex.
 -----BEGIN PGP SIGNATURE-----
 
 iQJHBAABCAAxFiEEiOrDCAFJzPfAjcif3SOs138+s6EFAlutQ+UTHHRyZWRpbmdA
 bnZpZGlhLmNvbQAKCRDdI6zXfz6zoap9EACWCtuZX1sqPHrU3qNIlqgb2GTFq9IR
 DOt+J0kxbVHddvgnaxnHdXq25nQ7fSCIx+k06C1Gs4/PmhMm4wLkJhaE7l80Ru5i
 5hKMlp/4mf4GN+aEqsLje6QndbUMUhVWTEk7U/OIybE4DeVq50ApKBP5lbuurAa/
 T/EeMUWzfsgbH64AXgLMrgQ8i9sM+FuGWGvIBPIwvOXJiyEcOwoO5/c7BkQngQkZ
 eglydbt9TWlWkdB4C9OM4/TGCHbnC8gO9XqBMniMI5mCTVpihPQ/O3RPfp8iWy83
 hfpxzyWK2w0LY2nyn4UdUhlc4YKD/piu290BHlx0HBEv0ovJrktlAYghhvQWbgIz
 7LHn8BV4jid23vn8tPhbmaWRZfXEwCviUqVVroKNuz6cJzNktXuXJQYI2QcSYCvf
 BQmynXWrcdMH8zFzXDSKUAIbgnj17kWSk0BACqdutj21GPhBJA7NbFhYpNUVngYU
 0JfVV14plzvZff4FIZCExH46zaHz5hlszrlNVI+wqRIGnpOvE9FZBTNbnZlm+e6x
 KHhUqyGA8dlMidgtb/kSKAfKsqWKwC5CsXkmFJeaVrfUcaBftY5zmVmkv4KCVL8u
 c7j3N8PjeSJR+Pf9yE7YwzZJttegiljw5VwFjVR5Z7nEtTYD2U9WGtHu1OgqgKm+
 8wJFaLJ/psinfw==
 =XdYT
 -----END PGP SIGNATURE-----

Merge tag 'tegra-for-4.20-arm-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/dt

ARM: tegra: Device tree changes for v4.20-rc1

This contains a massive amount of changes from Marcel Ziswiler for
various boards by Toradex.

* tag 'tegra-for-4.20-arm-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: (129 commits)
  ARM: dts: paz00: fix wakeup gpio keycode
  ARM: tegra: tegra20: Fix mixed tabs-spaces indentation
  ARM: tegra: colibri_t20: add eval board device tree
  ARM: tegra: colibri_t20: rename ac97 label to tegra_ac97
  ARM: tegra: colibri_t20: get rid of fake clocks simple bus
  ARM: tegra: colibri_t20: rename tps6586x@34 and drop unused pmic label
  ARM: tegra: colibri_t20: iris: drop unused i2c_ddc label
  ARM: tegra: colibri_t20: rename i2c_ddc to hdmi_ddc
  ARM: tegra: colibri_t20: drop module level model and compatible
  ARM: tegra: colibri_t20: iris: add colibri ssp support
  ARM: tegra: colibri_t20: iris: simplify model and compatible properties
  ARM: tegra: colibri_t20: simplify model and compatible properties
  ARM: tegra: colibri_t20: add compatibility comment
  ARM: tegra: colibri_t20: annotate/move sd card detect
  ARM: tegra: colibri_t20: add gpio hogs for gmi_wr_n buffers
  ARM: tegra: colibri_t20: add gpio hog to unreset usb ethernet chip
  ARM: tegra: colibri_t20: add i2c-thermtrip
  ARM: tegra: colibri_t20: annotate/rename lm95245 temperature sensor
  ARM: tegra: colibri_t20: iris: add dr_mode property
  ARM: tegra: colibri_t20: iris: add gpio wakeup key
  ...

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2018-09-28 17:39:58 +02:00
Arnd Bergmann
fb5c84ce00 dt-bindings: Changes for v4.20-rc1
This contains the PMC pad configuration bindings which are used to
 control the voltage of various pads found on Tegra chips. Among other
 things this is required to enable faster modes on SDHCI.
 -----BEGIN PGP SIGNATURE-----
 
 iQJHBAABCAAxFiEEiOrDCAFJzPfAjcif3SOs138+s6EFAlutQxsTHHRyZWRpbmdA
 bnZpZGlhLmNvbQAKCRDdI6zXfz6zoX4/D/9Hb45d7/gRWerRZPni9pMwsFChcVpT
 FuNGahIawSCeSXMb5ffjjzQmkM11QTSDmFdTPk2F2Wv1soiR/P52FxwNQEXRbhZN
 GFwsG3Bhqf9H3S1W5cW6O0wjZkuYqgk3dVGk24/f4h7oumCAcF4p7mc81/A978o5
 Tl/beFabianYPPKCU1lwIwlMgIi8vwSoccIKoLSFtRKppwocfW34jqaG0O7LFaWE
 OpBH5Xyl7Z+s7PDs04Rgg7bgl60ucscO51OVTIEc7eievEiYKo4eDjMc83wg1Dp1
 A0ABt/qE0iJqnYf2InXa1+nU8m1cxqQMFVrlH7B9LN5o7r7smNtZd0jV+bQLQLIO
 G4upR7Gff8lwhb9GknsjRhh+1I5MsT9iUCPvxHfx+PHi3VnnUGKHi8Tuc0eZg91c
 uP+51efGrVHDU0TDwl3WXoYH+n+bGMsK0gnUEKjDWThmaR9p7ofWgJw8TTtLppm4
 wkUKZV7IGCJoO084X53SZypE2DMaOjVMlMPNt8emO2I/UZXFB824oiI06VV6HPti
 lanZZbtupSUFLZx4zooq5UmgIrP87K8oYzSjIc1O58PJ7u0i4o3czkJl5Z06IukJ
 XVsPG58T0aje9uHGjFwsC2FMZMG+h7n3cnSFeco6UEv1qnbMVXcTtPQfmPh5Ic8R
 5Dj5/+Vw1MTf1w==
 =yepn
 -----END PGP SIGNATURE-----

Merge tag 'tegra-for-4.20-dt-bindings' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/dt

dt-bindings: Changes for v4.20-rc1

This contains the PMC pad configuration bindings which are used to
control the voltage of various pads found on Tegra chips. Among other
things this is required to enable faster modes on SDHCI.

* tag 'tegra-for-4.20-dt-bindings' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
  dt-bindings: Add Tegra PMC pad configuration bindings

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2018-09-28 17:31:46 +02:00
Alan Douglas
aa77e55d48 PCI: cadence: Correct probe behaviour when failing to get PHY
Test the correct value to see whether the PHY get failed.

Use devm_phy_get() instead of devm_phy_optional_get(), since it is
only called if phy name is given in devicetree and so should exist.
If failure when getting or linking PHY, put any PHYs which were
already got and unlink them.

Fixes: dfb8053469 ("PCI: cadence: Add generic PHY support to host and EP drivers")
Reported-by: Colin King <colin.king@canonical.com>
Signed-off-by: Alan Douglas <adouglas@cadence.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
2018-09-28 16:08:56 +01:00
Miklos Szeredi
18172b10b6 fuse: extract fuse_emit() helper
Prepare for cache filling by introducing a helper for emitting a single
directory entry.

Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2018-09-28 16:43:23 +02:00
Miklos Szeredi
6433b8998a fuse: add FOPEN_CACHE_DIR
Add flag returned by OPENDIR request to allow kernel to cache directory
contents in page cache.  The effect of FOPEN_CACHE_DIR is twofold:

 a) if not already cached, it writes entries into the cache

 b) if already cached, it allows reading entries from the cache

The FOPEN_KEEP_CACHE has the same effect as on regular files: unless this
flag is given the cache is cleared upon completion of open.

So FOPEN_KEEP_CACHE and FOPEN_KEEP_CACHE flags should be used together to
make use of the directory caching facility introduced in the following
patches.

The FUSE_AUTO_INVAL_DATA flag returned in INIT reply also has the same
affect on the directory cache as it has on data cache for regular files.

Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2018-09-28 16:43:23 +02:00
Miklos Szeredi
d123d8e183 fuse: split out readdir.c
Directory reading code is about to grow larger, so split it out from dir.c
into a new source file.

Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2018-09-28 16:43:23 +02:00
Kirill Tkhai
be2ff42c5d fuse: Use hash table to link processing request
We noticed the performance bottleneck in FUSE running our Virtuozzo storage
over rdma. On some types of workload we observe 20% of times spent in
request_find() in profiler.  This function is iterating over long requests
list, and it scales bad.

The patch introduces hash table to reduce the number of iterations, we do
in this function. Hash generating algorithm is taken from hash_add()
function, while 256 lines table is used to store pending requests.  This
fixes problem and improves the performance.

Reported-by: Alexey Kuznetsov <kuznet@virtuozzo.com>
Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2018-09-28 16:43:23 +02:00
Kirill Tkhai
3a5358d1a1 fuse: kill req->intr_unique
This field is not needed after the previous patch, since we can easily
convert request ID to interrupt request ID and vice versa.

Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2018-09-28 16:43:23 +02:00
Kirill Tkhai
c59fd85e4f fuse: change interrupt requests allocation algorithm
Using of two unconnected IDs req->in.h.unique and req->intr_unique does not
allow to link requests to a hash table. We need can't use none of them as a
key to calculate hash.

This patch changes the algorithm of allocation of IDs for a request. Plain
requests obtain even ID, while interrupt requests are encoded in the low
bit. So, in next patches we will be able to use the rest of ID bits to
calculate hash, and the hash will be the same for plain and interrupt
requests.

Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2018-09-28 16:43:23 +02:00
Kirill Tkhai
63825b4e1d fuse: do not take fc->lock in fuse_request_send_background()
Currently, we take fc->lock there only to check for fc->connected.
But this flag is changed only on connection abort, which is very
rare operation.

So allow checking fc->connected under just fc->bg_lock and use this lock
(as well as fc->lock) when resetting fc->connected.

Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2018-09-28 16:43:23 +02:00
Kirill Tkhai
ae2dffa394 fuse: introduce fc->bg_lock
To reduce contention of fc->lock, this patch introduces bg_lock for
protection of fields related to background queue. These are:
max_background, congestion_threshold, num_background, active_background,
bg_queue and blocked.

This allows next patch to make async reads not requiring fc->lock, so async
reads and writes will have better performance executed in parallel.

Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2018-09-28 16:43:22 +02:00
Kirill Tkhai
2b30a53314 fuse: add locking to max_background and congestion_threshold changes
Functions sequences like request_end()->flush_bg_queue() require that
max_background and congestion_threshold are constant during their
execution. Otherwise, checks like

	if (fc->num_background == fc->max_background)

made in different time may behave not like expected.

Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2018-09-28 16:43:22 +02:00
Kirill Tkhai
2a23f2b8ad fuse: use READ_ONCE on congestion_threshold and max_background
Since they are of unsigned int type, it's allowed to read them
unlocked during reporting to userspace. Let's underline this fact
with READ_ONCE() macroses.

Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2018-09-28 16:43:22 +02:00
Kirill Tkhai
e287179afe fuse: use list_first_entry() in flush_bg_queue()
This cleanup patch makes the function to use the primitive
instead of direct dereferencing.

Also, move fiq dereferencing out of cycle, since it's
always constant.

Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2018-09-28 16:43:22 +02:00
Niels de Vos
88bc7d5097 fuse: add support for copy_file_range()
There are several FUSE filesystems that can implement server-side copy
or other efficient copy/duplication/clone methods. The copy_file_range()
syscall is the standard interface that users have access to while not
depending on external libraries that bypass FUSE.

Signed-off-by: Niels de Vos <ndevos@redhat.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2018-09-28 16:43:22 +02:00
Miklos Szeredi
908a572b80 fuse: fix blocked_waitq wakeup
Using waitqueue_active() is racy.  Make sure we issue a wake_up()
unconditionally after storing into fc->blocked.  After that it's okay to
optimize with waitqueue_active() since the first wake up provides the
necessary barrier for all waiters, not the just the woken one.

Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Fixes: 3c18ef8117 ("fuse: optimize wake_up")
Cc: <stable@vger.kernel.org> # v3.10
2018-09-28 16:43:22 +02:00
Miklos Szeredi
4c316f2f3f fuse: set FR_SENT while locked
Otherwise fuse_dev_do_write() could come in and finish off the request, and
the set_bit(FR_SENT, ...) could trigger the WARN_ON(test_bit(FR_SENT, ...))
in request_end().

Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Reported-by: syzbot+ef054c4d3f64cd7f7cec@syzkaller.appspotmai
Fixes: 46c34a348b ("fuse: no fc->lock for pqueue parts")
Cc: <stable@vger.kernel.org> # v4.2
2018-09-28 16:43:22 +02:00
Kirill Tkhai
d2d2d4fb1f fuse: Fix use-after-free in fuse_dev_do_write()
After we found req in request_find() and released the lock,
everything may happen with the req in parallel:

cpu0                              cpu1
fuse_dev_do_write()               fuse_dev_do_write()
  req = request_find(fpq, ...)    ...
  spin_unlock(&fpq->lock)         ...
  ...                             req = request_find(fpq, oh.unique)
  ...                             spin_unlock(&fpq->lock)
  queue_interrupt(&fc->iq, req);   ...
  ...                              ...
  ...                              ...
  request_end(fc, req);
    fuse_put_request(fc, req);
  ...                              queue_interrupt(&fc->iq, req);


Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Fixes: 46c34a348b ("fuse: no fc->lock for pqueue parts")
Cc: <stable@vger.kernel.org> # v4.2
2018-09-28 16:43:21 +02:00
Kirill Tkhai
bc78abbd55 fuse: Fix use-after-free in fuse_dev_do_read()
We may pick freed req in this way:

[cpu0]                                  [cpu1]
fuse_dev_do_read()                      fuse_dev_do_write()
   list_move_tail(&req->list, ...);     ...
   spin_unlock(&fpq->lock);             ...
   ...                                  request_end(fc, req);
   ...                                    fuse_put_request(fc, req);
   if (test_bit(FR_INTERRUPTED, ...))
         queue_interrupt(fiq, req);

Fix that by keeping req alive until we finish all manipulations.

Reported-by: syzbot+4e975615ca01f2277bdd@syzkaller.appspotmail.com
Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Fixes: 46c34a348b ("fuse: no fc->lock for pqueue parts")
Cc: <stable@vger.kernel.org> # v4.2
2018-09-28 16:43:21 +02:00
Hannes Reinecke
e982c4d0a2 virtio-blk: modernize sysfs attribute creation
Use new-style DEVICE_ATTR_RO/DEVICE_ATTR_RW to create the sysfs attributes
and register the disk with default sysfs attribute groups.

Signed-off-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Bart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-09-28 08:30:33 -06:00
Hannes Reinecke
98af4d4df8 zram: register default groups with device_add_disk()
Register default sysfs groups during device_add_disk() to avoid a
race condition with udev during startup.

Signed-off-by: Hannes Reinecke <hare@suse.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Nitin Gupta <ngupta@vflare.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-09-28 08:30:32 -06:00
Hannes Reinecke
95cf7809bf aoe: register default groups with device_add_disk()
Register default sysfs groups during device_add_disk() to avoid a
race condition with udev during startup.

Signed-off-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: Ed L. Cachin <ed.cashin@acm.org>
Reviewed-by: Bart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-09-28 08:30:30 -06:00
Hannes Reinecke
33b14f67a4 nvme: register ns_id attributes as default sysfs groups
We should be registering the ns_id attribute as default sysfs
attribute groups, otherwise we have a race condition between
the uevent and the attributes appearing in sysfs.

Suggested-by: Bart van Assche <bvanassche@acm.org>
Reviewed-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-09-28 08:30:29 -06:00
Hannes Reinecke
fef912bf86 block: genhd: add 'groups' argument to device_add_disk
Update device_add_disk() to take an 'groups' argument so that
individual drivers can register a device with additional sysfs
attributes.
This avoids race condition the driver would otherwise have if these
groups were to be created with sysfs_add_groups().

Signed-off-by: Martin Wilck <martin.wilck@suse.com>
Signed-off-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-09-28 08:30:28 -06:00
Mark Brown
5451521409 regulator/mfd: Support for the ROHM BD71847
This adds support for the BD71847 which touches both MFD and regulator.
 There's a few other bits and pieces included as some dependency patches
 had already been applied so would've required rebasing.
 -----BEGIN PGP SIGNATURE-----
 
 iQFHBAABCgAxFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAluuM/8THGJyb29uaWVA
 a2VybmVsLm9yZwAKCRAk1otyXVSH0Az7B/4ye6MIEn8hwKmS36NU3oCvCTFiOZHe
 W+T1/O7gOYPSOeHk/4SA8v+A0X2ry+zCschSJtnGDWeZwiZmuhSbQO3SKKM+iAKJ
 R1UFioMVd8cr8UySX0ddSdFit+rI+FcZHd8TYAjbseX+0YKZX7z7/rXPVhSEhdU3
 BxRy58DJRbLxYofiGruvDd/sj6VFukVmLRjQUE5SqZ8aTKXBbrT7h0Jgi3m7aOmK
 g/a+ulMNecq8884oQuBjj1+xCuT02GJsT04BKaXEBsAFX1Fh8IyOxej2N2PaX1z/
 6HoPjSAac/Gl9BAgpV0YDdEJJR8yumkdDJubF3SayMyoiv16zMTT1fvC
 =t0Ni
 -----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
 
 iQFHBAABCgAxFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAluuNaMTHGJyb29uaWVA
 a2VybmVsLm9yZwAKCRAk1otyXVSH0H/3B/9u/IGN9LWSnauAivTDqZGx1V3a97e2
 ijZSiWaTWFmIBPUNIJgDQirdqsX61Mgu9mTbeD9+tmi2Mm4AOZRJT4pdtzZCehWT
 HQuN4dcF9heftf/6Q4c+5yZFAJzOJHHuFklNdDAuM12rUp5IDpKxIo2nrx7MDN6r
 RgrxK6eTluvOL4+VJwN/VqXRBWfN857uMjaGkbFV3CrYJh2Ktumts3IcFd18Cpvd
 U3gBUYNsPBiQtmGXFkrCCBaYWqn5Ry91CAvpTjoJdZx50xbeXVOEUnUMaidQ4/ru
 XL+PqcdTovKuV5OhMzra5MCVt3Cv8Oc/21KeNvFEIV3X6O531LEcksDx
 =zN+p
 -----END PGP SIGNATURE-----

Merge tag 'bd71847-support' into regulator-4.20

regulator/mfd: Support for the ROHM BD71847

This adds support for the BD71847 which touches both MFD and regulator.
There's a few other bits and pieces included as some dependency patches
had already been applied so would've required rebasing.
2018-09-28 15:07:30 +01:00
Xue Liu
3e3a5a1d93 ieee802154: mcr20a: Remove struct mcr20a_platform_data
The struct mcr20a_platform_data is uesed only in probe function
and it holds only one member. So it is not necessary to reserve it.

Using gpiod family API to handle reset pin.

Signed-off-by: Xue Liu <liuxuenetmail@gmail.com>
Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
2018-09-28 16:06:14 +02:00
Matti Vaittinen
2ece646c90
regulator: bd718xx: rename bd71837 to 718xx
rename bd71837-regulator.c to bd718x7-regulator.c to reflect the
fact that also BD71847 is now supported by the driver.

Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2018-09-28 14:57:13 +01:00
Matti Vaittinen
a4bfc2c28a
regulator: bd718XX use pickable ranges
Few regulators in BD71837 and BD71847 can output voltages from
different voltage ranges. Register interface is arranged so that
used range is selected by toggling bits which are not next to actual
voltage selection bits. Then the voltage inside selected range is
determined by voltage selection bits (as usual). Support BD71837
and BD71847 selectible range voltages using new pickable ranges
helpers.

Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2018-09-28 14:57:12 +01:00
Matti Vaittinen
dd2be639f4
regulator/mfd: bd718xx: rename bd71837/bd71847 common instances
Rename parts of code that support both BD71837 and BD71847 to BD718XX.

Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Acked-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
2018-09-28 14:57:04 +01:00
Matti Vaittinen
18e4b55fbd
regulator: Support regulators where voltage ranges are selectable
For example ROHM BD71837 and ROHM BD71847 Power management ICs have
regulators which provide multiple linear ranges. Ranges can be
selected by individual non contagious bit in vsel register. Add
regmap helper functions for selecting ranges.

Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2018-09-28 14:57:03 +01:00
Matti Vaittinen
01e17e5d80
mfd: dt bindings: add BD71847 device-tree binding documentation
Add ROHM BD71847 Power Management IC MFD binding information to
device-tree binding documents.

Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
2018-09-28 14:56:56 +01:00
Matti Vaittinen
12fc309a95
regulator: dt bindings: add BD71847 device-tree binding documentation
Add ROHM BD71847 Power Management IC regulator binding information to
device-tree binding documents.

Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
2018-09-28 14:56:55 +01:00
Matti Vaittinen
494edd266b
regulator/mfd: Support ROHM BD71847 power management IC
BD71847 is reduced version of BD71837. DVS bucks 3 and 4 are
removed as is LDO7. Voltage ranges of some regulators are
expanded.

Add initial support for BD71847 with BD71837 driver.

Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Acked-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
2018-09-28 14:56:46 +01:00
Mark Brown
2e0fe4d0c6 regulator: Fixes for 4.19
A collection of fairly minor bug fixes here, a couple of driver specific
 ones plus two core fixes.  There's one fix for the new suspend state
 code which fixes some confusion with constant values that are supposed
 to indicate noop operation and another fixing a race condition with the
 creation of sysfs files on new regulators.
 -----BEGIN PGP SIGNATURE-----
 
 iQFHBAABCgAxFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAluuL04THGJyb29uaWVA
 a2VybmVsLm9yZwAKCRAk1otyXVSH0GdVB/9AWbmIA8iNJDo/CETEZ9UiOvEFXSO8
 vRk+WcU4vtPo4qp27ylYRh9dKjWczEq8dKpe4YmaLjv4HX5MggLiwO1cLl44+q6y
 AKZYK1FvGR1yExP3adE4XEC03jD21909mkLCNRawCVh+Iorp4r5CA6ahNfzT0flI
 Eo5nKi4zN/0WSjxcoDdqUQ7oIivlmxiC8HYZyluS7f6UV0rcQXeqdXKqs6utPUxD
 w4MLQriPqG7R0g75XqoRB7hVcZBO4m/NRi6SMGQtF1WG1unpl+iCnxRa0WXHi1th
 nMg900nucgIe6gWBxMocWbyXsFj3+CrWlCB4BxVW8+pe8VyLFtYnPUA5
 =yAAv
 -----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
 
 iQFHBAABCgAxFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAluuMasTHGJyb29uaWVA
 a2VybmVsLm9yZwAKCRAk1otyXVSH0NPZB/0X1e0JWK819dT5HWgNa6E2391fn1Qj
 eY89u0cJj+3gom3QyOKCupcjEIumPHVYjiCsIEVipH+vefcuzgyUkRHhBZsSFgyp
 90sVHKywg5pcxi6em/wuStzkXA84HjCVPJ4nDd6fnE6Ew7NDpP0/FPkpt7PwqlFy
 b56pg/iK6YFhgXLlJMi6k7TGb/NG9M0qZzrb5UvTIbqVw9IRsqQrLN6YSaqhUFwe
 hwonne4bMPl4DroVBGDz15djFv0Re7DxJuhAErJ/Fafzq5SX1zAPzkJ6peJnSdyF
 2fUv6596nhNKVqAvMF5514kBq+JeFB13YS4S2Xm2Dm/rQ1P9G8XSfzQG
 =YPYr
 -----END PGP SIGNATURE-----

Merge tag 'regulator-v4.19-rc5' into regulator-bd718xx

regulator: Fixes for 4.19

A collection of fairly minor bug fixes here, a couple of driver specific
ones plus two core fixes.  There's one fix for the new suspend state
code which fixes some confusion with constant values that are supposed
to indicate noop operation and another fixing a race condition with the
creation of sysfs files on new regulators.
2018-09-28 14:50:33 +01:00
Roman Gushchin
4288ea006c bpf: harden flags check in cgroup_storage_update_elem()
cgroup_storage_update_elem() shouldn't accept any flags
argument values except BPF_ANY and BPF_EXIST to guarantee
the backward compatibility, had a new flag value been added.

Fixes: de9cbbaadb ("bpf: introduce cgroup storage maps")
Signed-off-by: Roman Gushchin <guro@fb.com>
Reported-by: Daniel Borkmann <daniel@iogearbox.net>
Cc: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-09-28 15:50:23 +02:00
Tony Krowiak
492a6be197 s390: doc: detailed specifications for AP virtualization
This patch provides documentation describing the AP architecture and
design concepts behind the virtualization of AP devices. It also
includes an example of how to configure AP devices for exclusive
use of KVM guests.

Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com>
Reviewed-by: Halil Pasic <pasic@linux.ibm.com>
Message-Id: <20180925231641.4954-27-akrowiak@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2018-09-28 15:50:11 +02:00
Tony Krowiak
112c24d4dc KVM: s390: CPU model support for AP virtualization
Introduces two new CPU model facilities to support
AP virtualization for KVM guests:

1. AP Query Configuration Information (QCI) facility is installed.

   This is indicated by setting facilities bit 12 for
   the guest. The kernel will not enable this facility
   for the guest if it is not set on the host.

   If this facility is not set for the KVM guest, then only
   APQNs with an APQI less than 16 will be used by a Linux
   guest regardless of the matrix configuration for the virtual
   machine. This is a limitation of the Linux AP bus.

2. AP Facilities Test facility (APFT) is installed.

   This is indicated by setting facilities bit 15 for
   the guest. The kernel will not enable this facility for
   the guest if it is not set on the host.

   If this facility is not set for the KVM guest, then no
   AP devices will be available to the guest regardless of
   the guest's matrix configuration for the virtual
   machine. This is a limitation of the Linux AP bus.

Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Halil Pasic <pasic@linux.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Tested-by: Michael Mueller <mimu@linux.ibm.com>
Tested-by: Farhan Ali <alifm@linux.ibm.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20180925231641.4954-26-akrowiak@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2018-09-28 15:50:11 +02:00
Tony Krowiak
37940fb0b6 KVM: s390: device attrs to enable/disable AP interpretation
Introduces two new VM crypto device attributes (KVM_S390_VM_CRYPTO)
to enable or disable AP instruction interpretation from userspace
via the KVM_SET_DEVICE_ATTR ioctl:

* The KVM_S390_VM_CRYPTO_ENABLE_APIE attribute enables hardware
  interpretation of AP instructions executed on the guest.

* The KVM_S390_VM_CRYPTO_DISABLE_APIE attribute disables hardware
  interpretation of AP instructions executed on the guest. In this
  case the instructions will be intercepted and pass through to
  the guest.

Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20180925231641.4954-25-akrowiak@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2018-09-28 15:50:11 +02:00
Pierre Morel
9ee71f20cb KVM: s390: vsie: allow guest FORMAT-0 CRYCB on host FORMAT-2
When the guest schedules a SIE with a FORMAT-0 CRYCB,
we are able to schedule it in the host with a FORMAT-2
CRYCB if the host uses FORMAT-2

Signed-off-by: Pierre Morel <pmorel@linux.ibm.com>
Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com>
Message-Id: <20180925231641.4954-24-akrowiak@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2018-09-28 15:50:11 +02:00
Pierre Morel
6b79de4b05 KVM: s390: vsie: allow guest FORMAT-1 CRYCB on host FORMAT-2
When the guest schedules a SIE with a CRYCB FORMAT-1 CRYCB,
we are able to schedule it in the host with a FORMAT-2 CRYCB
if the host uses FORMAT-2.

Signed-off-by: Pierre Morel <pmorel@linux.ibm.com>
Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com>
Message-Id: <20180925231641.4954-23-akrowiak@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2018-09-28 15:50:11 +02:00
Pierre Morel
c9ba8c2cd2 KVM: s390: vsie: allow guest FORMAT-0 CRYCB on host FORMAT-1
When the guest schedules a SIE with a FORMAT-0 CRYCB,
we are able to schedule it in the host with a FORMAT-1
CRYCB if the host uses FORMAT-1 or FORMAT-0.

Signed-off-by: Pierre Morel <pmorel@linux.ibm.com>
Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com>
Message-Id: <20180925231641.4954-22-akrowiak@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2018-09-28 15:50:11 +02:00