It has been pointed out to me many times that it is useful to be able to
switch off AUX records to save the bandwidth for records that actually
matter, for example, in AUX overwrite mode.
The usefulness of PERF_RECORD_AUX is in some of its flags, like the
TRUNCATED flag that tells the decoder where exactly gaps in the trace
are. The OVERWRITE flag, on the other hand will be set on every single
record in overwrite mode. However, a PERF_RECORD_AUX[flags=OVERWRITE] is
generated on every target task's sched_out, which over time adds up to a
lot of useless information.
If any folks out there have userspace that depends on a constant stream
of OVERWRITE records for a good reason, they'll have to let us know.
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Acked-by: Will Deacon <will.deacon@arm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Markus T Metzger <markus.t.metzger@intel.com>
Link: http://lkml.kernel.org/r/20180404145323.28651-1-alexander.shishkin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This SPI driver does not use the legacy GPIO header so
just delete it.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
The following lockdep splat was observed:
[ 1222.241750] ======================================================
[ 1222.271301] WARNING: possible circular locking dependency detected
[ 1222.301060] 4.16.0-10.el8+5.x86_64+debug #1 Not tainted
[ 1222.326659] ------------------------------------------------------
[ 1222.356565] systemd-shutdow/1 is trying to acquire lock:
[ 1222.382660] ((&ioat_chan->timer)){+.-.}, at: [<00000000f71e1a28>] del_timer_sync+0x5/0xf0
[ 1222.422928]
[ 1222.422928] but task is already holding lock:
[ 1222.451743] (&(&ioat_chan->prep_lock)->rlock){+.-.}, at: [<000000008ea98b12>] ioat_shutdown+0x86/0x100 [ioatdma]
:
[ 1223.524987] Chain exists of:
[ 1223.524987] (&ioat_chan->timer) --> &(&ioat_chan->cleanup_lock)->rlock --> &(&ioat_chan->prep_lock)->rlock
[ 1223.524987]
[ 1223.594082] Possible unsafe locking scenario:
[ 1223.594082]
[ 1223.622630] CPU0 CPU1
[ 1223.645080] ---- ----
[ 1223.667404] lock(&(&ioat_chan->prep_lock)->rlock);
[ 1223.691535] lock(&(&ioat_chan->cleanup_lock)->rlock);
[ 1223.728657] lock(&(&ioat_chan->prep_lock)->rlock);
[ 1223.765122] lock((&ioat_chan->timer));
[ 1223.784095]
[ 1223.784095] *** DEADLOCK ***
[ 1223.784095]
[ 1223.813492] 4 locks held by systemd-shutdow/1:
[ 1223.834677] #0: (reboot_mutex){+.+.}, at: [<0000000056d33456>] SYSC_reboot+0x10f/0x300
[ 1223.873310] #1: (&dev->mutex){....}, at: [<00000000258dfdd7>] device_shutdown+0x1c8/0x660
[ 1223.913604] #2: (&dev->mutex){....}, at: [<0000000068331147>] device_shutdown+0x1d6/0x660
[ 1223.954000] #3: (&(&ioat_chan->prep_lock)->rlock){+.-.}, at: [<000000008ea98b12>] ioat_shutdown+0x86/0x100 [ioatdma]
In the ioat_shutdown() function:
spin_lock_bh(&ioat_chan->prep_lock);
set_bit(IOAT_CHAN_DOWN, &ioat_chan->state);
del_timer_sync(&ioat_chan->timer);
spin_unlock_bh(&ioat_chan->prep_lock);
According to the synchronization rule for the del_timer_sync() function,
the caller must not hold locks which would prevent completion of the
timer's handler.
The timer structure has its own lock that manages its synchronization.
Setting the IOAT_CHAN_DOWN bit should prevent other CPUs from
trying to use that device anyway, there is probably no need to call
del_timer_sync() while holding the prep_lock. So the del_timer_sync()
call is now moved outside of the prep_lock critical section to prevent
the circular lock dependency.
Signed-off-by: Waiman Long <longman@redhat.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
This patch fixes the following compilation warning
reported during x86_64 allmodconfig build:
drivers/dma/mcf-edma.c: In function 'mcf_edma_filter_fn':
drivers/dma/mcf-edma.c:296:33: warning: cast from pointer to
integer of different size [-Wpointer-to-int-cast]
return (mcf_chan->slave_id == (u32)param);
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Angelo Dureghello <angelo@sysam.it>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
SDVO encoders can have multiple different types of outputs hanging off
them. Currently the code tries to muck around with various is_foo
flags in the encoder to figure out which type its driving. That doesn't
work with atomic and other stuff, so let's nuke those flags and just
look at which type of connector we're actually dealing with.
The is_hdmi we'll need as that's not discoverable via the output flags,
but we'll just move it under the connector.
We'll also move the sdvo fixed mode handling out from the .get_modes()
hook into the sdvo lvds init function so that we can bail out properly
if there is no fixed mode to be found.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180917151504.8754-1-ville.syrjala@linux.intel.com
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
This remove the check and subsequent return of error for the case when
a SPI device requires SPI_CS_WORD and is also configured to use a GPIO
for the CS line.
Commit a134cc414e86 ("spi: always use software fallback for SPI_CS_WORD
when using cs_gio") handles this case now, so this check is no longer
necessary.
Signed-off-by: David Lechner <david@lechnology.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
This modifies the condition for using the software fallback
implementation for SPI_CS_WORD when the SPI controller is using a GPIO
for the CS line. When using a GPIO for CS, the hardware implementation
won't work, so we just enable the software fallback globally in this
case.
Signed-off-by: David Lechner <david@lechnology.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Minor code changes are:
- improve the readability in patch list
- add i2c remove function
- regmap_register_patch changes to regmap_multi_reg_write
Signed-off-by: Shuming Fan <shumingf@realtek.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
alsa_conformance_test -C hw:0,4 -p 1024 --debug
would sometime show:
TIME_DIFF(s) HW_LEVEL READ RATE
0.000095970 1024 1024 10670001.041992
0.042609555 1024 2048 24032.168372
0.021330364 1024 3072 48006.681930
0.021339559 1024 4096 47985.996337
The issue is that in dma pointer function we can have stale value
of the register for current descriptor of channel.
The register retains the number of the last descriptor that
was transferred.
Fix ensures that we report position, 0, till the one period worth of
data is transferred. After one period of data, in handler of period
completion interrupt we update the config and correct value of descriptor
starts reflecting.
Signed-off-by: Akshu Agrawal <akshu.agrawal@amd.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch fixed the boost volume at the begining of playback
while DAC volume set to lower level.
Signed-off-by: Shuming Fan <shumingf@realtek.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
The ADC/DAC path should open while calibration process.
Signed-off-by: Shuming Fan <shumingf@realtek.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch removed Headphone Playback Volume control.
Due to codec settings, we don't want the user to change HP analog gain.
The user could use DAC1 Playback Volume control to
change playback volume.
Signed-off-by: Shuming Fan <shumingf@realtek.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
We change the settings while HP power-up for better performance.
Signed-off-by: Shuming Fan <shumingf@realtek.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
module.h already contained moduleparam.h, so it is safe to remove
the redundant include.
The issue is detected with the help of Coccinelle.
Signed-off-by: zhong jiang <zhongjiang@huawei.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Two new tls tests added in parallel in both net and net-next.
Used Stephen Rothwell's linux-next resolution.
Signed-off-by: David S. Miller <davem@davemloft.net>
Mediatek SPI driver modifies some fields (tx_buf, rx_buf, len, tx_dma,
rx_dma) of the spi_transfer* passed in when doing transfer_one and in
interrupt handler. This is somewhat unexpected, and there are some
caller (e.g. Cr50 spi driver) that reuse the spi_transfer for multiple
messages. Add a field to record how many bytes have been transferred,
and calculate the right len / buffer based on it instead.
Signed-off-by: Pi-Hsun Shih <pihsun@chromium.org>
Change-Id: I23e218cd964f16c0b2b26127d4a5ca6529867673
Signed-off-by: Mark Brown <broonie@kernel.org>
Linux spreads out the non managed interrupt across the possible target CPUs
to avoid vector space exhaustion.
Managed interrupts are treated differently, as for them the vectors are
reserved (with guarantee) when the interrupt descriptors are initialized.
When the interrupt is requested a real vector is assigned. The assignment
logic uses the first CPU in the affinity mask for assignment. If the
interrupt has more than one CPU in the affinity mask, which happens when a
multi queue device has less queues than CPUs, then doing the same search as
for non managed interrupts makes sense as it puts the interrupt on the
least interrupt plagued CPU. For single CPU affine vectors that's obviously
a NOOP.
Restructre the matrix allocation code so it does the 'best CPU' search, add
the sanity check for an empty affinity mask and adapt the call site in the
x86 vector management code.
[ tglx: Added the empty mask check to the core and improved change log ]
Signed-off-by: Dou Liyang <douly.fnst@cn.fujitsu.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: hpa@zytor.com
Link: https://lkml.kernel.org/r/20180908175838.14450-2-dou_liyang@163.com
Linux finds the CPU which has the lowest vector allocation count to spread
out the non managed interrupts across the possible target CPUs, but does
not do so for managed interrupts.
Split out the CPU selection code into a helper function for reuse. No
functional change.
Signed-off-by: Dou Liyang <douly.fnst@cn.fujitsu.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: hpa@zytor.com
Link: https://lkml.kernel.org/r/20180908175838.14450-1-dou_liyang@163.com
If the pll clock needs to be enabled to get its rate, it will also need
to be enabled to provide it. So ensure it is kept enabled through the
lifetime of the device.
Fixes: 0d7412ed1f ("spi/bcm63xx-hspi: Enable the clock before calling clk_get_rate().")
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Fixes gcc '-Wunused-but-set-variable' warning:
security/smack/smackfs.c: In function 'smk_fill_super':
security/smack/smackfs.c:2856:16: warning:
variable 'root_inode' set but not used [-Wunused-but-set-variable]
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
samples/bpf build failed with the following errors:
$ make samples/bpf/
...
HOSTCC samples/bpf/sockex3_user.o
/data/users/yhs/work/net-next/samples/bpf/sockex3_user.c:16:8: error: redefinition of ‘struct bpf_flow_keys’
struct bpf_flow_keys {
^
In file included from /data/users/yhs/work/net-next/samples/bpf/sockex3_user.c:4:0:
./usr/include/linux/bpf.h:2338:9: note: originally defined here
struct bpf_flow_keys *flow_keys;
^
make[3]: *** [samples/bpf/sockex3_user.o] Error 1
Commit d58e468b11 ("flow_dissector: implements flow dissector BPF hook")
introduced struct bpf_flow_keys in include/uapi/linux/bpf.h and hence
caused the naming conflict with samples/bpf/sockex3_user.c.
The fix is to rename struct bpf_flow_keys in samples/bpf/sockex3_user.c
to flow_keys to avoid the conflict.
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Rename the Intel Ethernet Adaptive Virtual Function driver
(i40evf) to a new name (iavf) that is more consistent with
the ongoing maintenance of the driver as the universal VF driver
for multiple product lines.
This first patch fixes up the directory names and the .ko name,
intentionally ignoring the function names inside the driver
for now. Basically this is the simplest patch that gets
the rename done and will be followed by other patches that
rename the internal functions.
This patch also addresses a couple of string/name issues
and updates the Copyright year.
Also, made sure to add a MODULE_ALIAS to the old name.
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
This is a followup patch for Commit f6f3bac08f
("tools/bpf: bpftool: add net support").
Some improvements are made for the bpftool net output.
Specially, plain output is more concise such that
per attachment should nicely fit in one line.
Compared to previous output, the prog tag is removed
since it can be easily obtained with program id.
Similar to xdp attachments, the device name is added
to tc attachments.
The bpf program attached through shared block
mechanism is supported as well.
$ ip link add dev v1 type veth peer name v2
$ tc qdisc add dev v1 ingress_block 10 egress_block 20 clsact
$ tc qdisc add dev v2 ingress_block 10 egress_block 20 clsact
$ tc filter add block 10 protocol ip prio 25 bpf obj bpf_shared.o sec ingress flowid 1:1
$ tc filter add block 20 protocol ip prio 30 bpf obj bpf_cyclic.o sec classifier flowid 1:1
$ bpftool net
xdp:
tc:
v2(7) clsact/ingress bpf_shared.o:[ingress] id 23
v2(7) clsact/egress bpf_cyclic.o:[classifier] id 24
v1(8) clsact/ingress bpf_shared.o:[ingress] id 23
v1(8) clsact/egress bpf_cyclic.o:[classifier] id 24
The documentation and "bpftool net help" are updated
to make it clear that current implementation only
supports xdp and tc attachments. For programs
attached to cgroups, "bpftool cgroup" can be used
to dump attachments. For other programs e.g.
sk_{filter,skb,msg,reuseport} and lwt/seg6,
iproute2 tools should be used.
The new output:
$ bpftool net
xdp:
eth0(2) driver id 198
tc:
eth0(2) clsact/ingress fbflow_icmp id 335 act [{icmp_action id 336}]
eth0(2) clsact/egress fbflow_egress id 334
$ bpftool -jp net
[{
"xdp": [{
"devname": "eth0",
"ifindex": 2,
"mode": "driver",
"id": 198
}
],
"tc": [{
"devname": "eth0",
"ifindex": 2,
"kind": "clsact/ingress",
"name": "fbflow_icmp",
"id": 335,
"act": [{
"name": "icmp_action",
"id": 336
}
]
},{
"devname": "eth0",
"ifindex": 2,
"kind": "clsact/egress",
"name": "fbflow_egress",
"id": 334
}
]
}
]
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Add TISCI compatible System controller for AM6 SoCs.
Signed-off-by: Nishanth Menon <nm@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Add secure proxy instance for Main domain
Signed-off-by: Nishanth Menon <nm@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Add uart nodes for AM654 device tree components.
Signed-off-by: Nishanth Menon <nm@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Tero Kristo <t-kristo@ti.com>
AM65 has two PCIe controllers and each PCIe controller has '2' address
spaces one within the 4GB address space of the SoC and the other above
the 4GB address space of the SoC (cbass_main) in addition to the
register space. The size of the address space above the 4GB SoC address
space is 4GB. These address ranges will be used by CPU/DMA to access
the PCIe address space. In order to represent the address space above
the 4GB SoC address space and to represent the size of this address
space as 4GB, change address-cells and size-cells of interconnect to 2.
Since OSPI has similar need in MCU Domain Memory Map, change
address-cells and size-cells of cbass_mcu interconnect also to 2.
Fixes: ea47eed33a ("arm64: dts: ti: Add Support for AM654 SoC")
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Acked-by: Vignesh R <vigneshr@ti.com>
Acked-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Smatch reports:
../drivers/gpu/drm/i915/intel_sprite.c:1192 skl_plane_check_fb() warn: was || intended here instead of &&?
Obviously smatch is correct here since we're trying to check if we're
using either of the ccs modifiers. Since we now have is_ccs_modifier()
let's use it to fix this.
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Fixes: e21c2d3310 ("drm/i915: Move skl plane fb related checks into a better place")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180918131059.793-1-ville.syrjala@linux.intel.com
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
convert drm_atomic_helper_suspend/resume() to use
drm_mode_config_helper_suspend/resume().
With this conversion, tegra_drm_fb_suspend() and
tegra_drm_fb_resume() will not be used anymore.
Both of these functions can be removed.
Also, in tegra_drm struct's member state will not be
used anymore. So this can be removed forever.
Fixed one sparse warning.
Signed-off-by: Souptick Joarder <jrdr.linux@gmail.com>
Signed-off-by: Ajit Negi <ajitn.linux@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Currently erofs only supports clustersize == blocksize.
and clustersize == 2^n * blocksize will be supported in the future.
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch completes error handing code of z_erofs_do_read_page.
PG_error will be set when some read error happens, therefore
z_erofs_onlinepage_endio will unlock this page without setting
PG_uptodate.
Reviewed-by: Chao Yu <yucxhao0@huawei.com>
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
As described in Kconfig, the last compressed pack should be cached
for further reading for either `EROFS_FS_ZIP_CACHE_UNIPOLAR' or
`EROFS_FS_ZIP_CACHE_BIPOLAR' by design.
However, there is a bug in z_erofs_do_read_page, it will
switch `initial' to `false' at the very beginning before it decides
to cache the last compressed pack.
caching strategy should work properly after appling this patch.
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch completes error handing of z_erofs_map_blocks_iter
and vle_get_logical_extent_head, including no memory and
io error cases.
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch mainly introduces `vle_map_blocks_iter_ctx' to clean up
z_erofs_map_blocks_iter and vle_get_logical_extent_head.
It changes the return value of `vle_get_logical_extent_head' to int
for the later error handing. In addition, it also renames `pcn' to
`pblk' since only `pblk' exists in erofs compression ondisk format.
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This adds Intel(R) Trace Hub PCI ID for Ice Lake PCH.
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The core of the driver expects the resource array from the glue layer
to be indexed by even numbers, as is the case for 64-bit PCI resources.
This doesn't hold true for others, ACPI in this instance, which leads
to an out-of-bounds access and an ioremap() on whatever address that
access fetches.
This patch fixes the problem by reading resource array differently based
on whether the 64-bit flag is set, which would indicate PCI glue layer.
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Fixes: ebc57e399b ("intel_th: Add ACPI glue layer")
CC: stable@vger.kernel.org # v4.17+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit a753bfcfdb ("intel_th: Make the switch allocate its subdevices")
brings in new subdevice addition/removal logic that's broken for "host
mode": the SWITCH device has no children to begin with, which is not
handled in the code. This results in a null dereference bug later down
the path.
This patch fixes the subdevice removal code to handle host mode correctly.
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Fixes: a753bfcfdb ("intel_th: Make the switch allocate its subdevices")
CC: stable@vger.kernel.org # v4.14+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When we leak some tty buffer, warn about that. For that we need to
account the memory used also in the tty_buffer_free_all function. On
other locations, the accounting is handled correctly.
Note that we do not account the free list, as that was accounted in
tty_buffer_free before put on the free list.
I have been using this patch for ages, so let's see if anybody else
encounters any issues.
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Currently there are a bunch of kernel-doc function comments that have a
line of whitespace after the comment and before the function they
comment - this is incorrect, there should be no whitespace here.
Remove incorrect whitespace between comment and associated function.
Signed-off-by: Tobin C. Harding <me@tobin.cc>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The SC16IS752 has an Enhanced Feature Register which is aliased at the
same address as the Interrupt Identification Register; accessing it
requires that a magic value is written to the Line Configuration
Register. If an interrupt is raised while the EFR is mapped in then
the ISR won't be able to access the IIR, leading to the "Unexpected
interrupt" error messages.
Avoid the problem by claiming a mutex around accesses to the EFR
register, also claiming the mutex in the interrupt handler work
item (this is equivalent to disabling interrupts to interlock against
a non-threaded interrupt handler).
See: https://github.com/raspberrypi/linux/issues/2529
Signed-off-by: Phil Elwell <phil@raspberrypi.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The SC16IS752 is a dual-channel device. The two channels are largely
independent, but the IRQ signals are wired together as an open-drain,
active low signal which will be driven low while either of the
channels requires attention, which can be for significant periods of
time until operations complete and the interrupt can be acknowledged.
In that respect it is should be treated as a true level-sensitive IRQ.
The kernel, however, needs to be able to exit interrupt context in
order to use I2C or SPI to access the device registers (which may
involve sleeping). Therefore the interrupt needs to be masked out or
paused in some way.
The usual way to manage sleeping from within an interrupt handler
is to use a threaded interrupt handler - a regular interrupt routine
does the minimum amount of work needed to triage the interrupt before
waking the interrupt service thread. If the threaded IRQ is marked as
IRQF_ONESHOT the kernel will automatically mask out the interrupt
until the thread runs to completion. The sc16is7xx driver used to
use a threaded IRQ, but a patch switched to using a kthread_worker
in order to set realtime priorities on the handler thread and for
other optimisations. The end result is non-threaded IRQ that
schedules some work then returns IRQ_HANDLED, making the kernel
think that all IRQ processing has completed.
The work-around to prevent a constant stream of interrupts is to
mark the interrupt as edge-sensitive rather than level-sensitive,
but interpreting an active-low source as a falling-edge source
requires care to prevent a total cessation of interrupts. Whereas
an edge-triggering source will generate a new edge for every interrupt
condition a level-triggering source will keep the signal at the
interrupting level until it no longer requires attention; in other
words, the host won't see another edge until all interrupt conditions
are cleared. It is therefore vital that the interrupt handler does not
exit with an outstanding interrupt condition, otherwise the kernel
will not receive another interrupt unless some other operation causes
the interrupt state on the device to be cleared.
The existing sc16is7xx driver has a very simple interrupt "thread"
(kthread_work job) that processes interrupts on each channel in turn
until there are no more. If both channels are active and the first
channel starts interrupting while the handler for the second channel
is running then it will not be detected and an IRQ stall ensues. This
could be handled easily if there was a shared IRQ status register, or
a convenient way to determine if the IRQ had been deasserted for any
length of time, but both appear to be lacking.
Avoid this problem (or at least make it much less likely to happen)
by reducing the granularity of per-channel interrupt processing
to one condition per iteration, only exiting the overall loop when
both channels are no longer interrupting.
Signed-off-by: Phil Elwell <phil@raspberrypi.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The 8250 FIFOs indeed need to be cleared after stopping transmission in
RS485 mode without SER_RS485_RX_DURING_TX flag set. But there are two
problems with the approach taken by the previous patch from Fixes tag.
First, serial8250_clear_fifos() should clear fifos, but what it really
does is it enables the FIFOs unconditionally if present, clears them
and then sets the FCR register to zero, which effectively disables the
FIFOs. In case the FIFO is disabled, enabling it and clearing it makes
no sense and in fact can trigger misbehavior of the 8250 core. Moreover,
the FCR register may contain other FIFO configuration bits which may not
be writable unconditionally and writing them incorrectly can trigger
misbehavior of the 8250 core too. (ie. AM335x UART swallows the first
byte and retransmits the last byte twice because of this FCR write).
Second, serial8250_clear_and_reinit_fifos() completely reloads the FCR,
but what really has to happen at the end of the RS485 transmission is
clearing of the FIFOs and nothing else.
This patch repairs serial8250_clear_fifos() so that it really only
clears the FIFOs by operating on FCR[2:1] bits and leaves all the
other bits alone. It also undoes serial8250_clear_and_reinit_fifos()
from __do_stop_tx_rs485() as serial8250_clear_fifos() is sufficient.
Signed-off-by: Marek Vasut <marex@denx.de>
Fixes: 2bed8a8e70 ("Clearing FIFOs in RS485 emulation mode causes subsequent transmits to break")
Cc: Daniel Jedrychowski <avistel@gmail.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: stable <stable@vger.kernel.org> # let it bake a bit before merging
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In preparation to remove the node name pointer from struct device_node,
convert printf users to use the %pOFn format specifier.
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jiri Slaby <jslaby@suse.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: linux-serial@vger.kernel.org
Cc: linuxppc-dev@lists.ozlabs.org
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>