Commit graph

932,869 commits

Author SHA1 Message Date
Kuninori Morimoto
0b7990e389
ASoC: add for_each_rtd_codec_dai() macro
ALSA SoC snd_soc_pcm_runtime has snd_soc_dai array for codec_dai.
To be more readable code, this patch adds
new for_each_rtd_codec_dai() macro, and replace existing code to it.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2018-09-04 16:59:11 +01:00
Kuninori Morimoto
3db769f177
ASoC: add for_each_link_codecs() macro
ALSA SoC snd_soc_dai_link has snd_soc_dai_link_component array
for codecs.
To be more readable code, this patch adds
new for_each_link_codecs() macro, and replace existing code to it.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2018-09-04 16:59:11 +01:00
Randy Dunlap
1efef7cc72
regulator: fix kernel-doc for regulator_suspend()
Fix kernel-doc warning:

../drivers/regulator/core.c:4479: warning: Excess function parameter 'state' description in 'regulator_suspend'

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Liam Girdwood <lgirdwood@gmail.com>
Cc: Mark Brown <broonie@kernel.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
2018-09-04 16:57:23 +01:00
Andrew F. Davis
18d545bb25
ASoC: tlv320aic31xx: Add overflow detection support
Similar to short circuit detection, when the ADC/DAC is saturated and
overflows poor audio quality can result and should be reported to the
user. This device support Automatic Dynamic Range Compression (DRC)
to reduce this but it is not enabled currently in this driver.

Signed-off-by: Andrew F. Davis <afd@ti.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2018-09-04 16:50:51 +01:00
Mikulas Patocka
e4b069e094 dm verity: fix crash on bufio buffer that was allocated with vmalloc
Since commit d1ac3ff008 ("dm verity: switch to using asynchronous hash
crypto API") dm-verity uses asynchronous crypto calls for verification,
so that it can use hardware with asynchronous processing of crypto
operations.

These asynchronous calls don't support vmalloc memory, but the buffer data
can be allocated with vmalloc if dm-bufio is short of memory and uses a
reserved buffer that was preallocated in dm_bufio_client_create().

Fix verity_hash_update() so that it deals with vmalloc'd memory
correctly.

Reported-by: "Xiao, Jin" <jin.xiao@intel.com>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Fixes: d1ac3ff008 ("dm verity: switch to using asynchronous hash crypto API")
Cc: stable@vger.kernel.org # 4.12+
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2018-09-04 11:25:25 -04:00
Jagan Teki
0b1ea6f357 arm64: dts: allwinner: h6: Add OrangePi One Plus initial support
OrangePi One Plus is Allwinner H6 based open-source SBC,
which support:
- Allwinner H6 Quad-core 64-bit ARM Cortex-A53
- GPU Mali-T720
- 1GB LPDDR3 RAM
- AXP805 PMIC
- 1Gbps GMAC via RTL8211
- USB 2.0 Host, OTG
- HDMI port
- 5V/2A DC power supply

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
2018-09-04 23:06:07 +08:00
Chris Wilson
a167b1e131 drm/i915: Pull intel_uncore_arm_unclaimed_mmio_detection() under the spinlock
Elsewhere we manipulate uncore.unclaimed_mmio_check and
i915_param.mmio_debug under the irq lock (e.g. preserving the current
value across a user forcewake grab), but do not protect the manipulation
inside intel_uncore_arm_unclaimed_mmio_detection() from concurrent
access, even from itself. This is an issue as we do call
arm_unclaimed_mmio_detection from multiple threads without coordination.

Suggested-by: Mika Kuoppala <mika.kuoppala@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intelcom>
Link: https://patchwork.freedesktop.org/patch/msgid/20180904131207.17563-1-chris@chris-wilson.co.uk
2018-09-04 16:01:14 +01:00
Rob Herring
6901378c79 of/unittest: add printf tests for node name
Add some printf test for printing the node name (without the
unit-address).

Reviewed-by: Frank Rowand <frank.rowand@sony.com>
Signed-off-by: Rob Herring <robh@kernel.org>
2018-09-04 10:00:01 -05:00
Rob Herring
b610e2ff46 of/unittest: remove use of node name pointer in overlay high level test
In preparation for removing the node name pointer, it needs to be
removed from of_unittest_overlay_high_level. However, it's not really
correct to use the node name without the unit-address and we should use
the full node name. This most easily done by iterating over the child
nodes with for_each_child_of_node() which is what of_get_child_by_name()
does internally. While at it, we might as well convert the outer loop to
use for_each_child_of_node() too instead of open coding it.

Reviewed-by: Frank Rowand <frank.rowand@sony.com>
Signed-off-by: Rob Herring <robh@kernel.org>
2018-09-04 09:59:45 -05:00
Andreas Kemnade
3c398f3c3b mmc: omap_hsmmc: fix wakeirq handling on removal
after unbinding mmc I get things like this:
[  185.294067] mmc1: card 0001 removed
[  185.305206] omap_hsmmc 480b4000.mmc: wake IRQ with no resume: -13

The wakeirq stays in /proc-interrupts

rebinding shows this:
[  289.795959] genirq: Flags mismatch irq 112. 0000200a (480b4000.mmc:wakeup) vs. 0000200a (480b4000.mmc:wakeup)
[  289.808959] omap_hsmmc 480b4000.mmc: Unable to request wake IRQ
[  289.815338] omap_hsmmc 480b4000.mmc: no SDIO IRQ support, falling back to polling

That bug seems to be introduced by switching from devm_request_irq()
to generic wakeirq handling.

So let us cleanup at removal.

Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Fixes: 5b83b2234b ("mmc: omap_hsmmc: Change wake-up interrupt to use generic wakeirq")
Cc: stable@vger.kernel.org # v4.2+
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2018-09-04 16:28:43 +02:00
Tvrtko Ursulin
b212f0a470 drm/i915/icl: Fix context RPCS programming
There are two issues with the current RPCS programming for Icelake:

Expansion of the slice count bitfield has been missed, as well as the
required programming workaround for the subslice count bitfield size
limitation.

1)

Bitfield width for configuring the active slice count has grown so we need
to program the GEN8_R_PWR_CLK_STATE accordingly.

Current code was always requesting eight times the number of slices (due
writing to a bitfield starting three bits higher than it should). These
requests were luckily a) capped by the hardware to the available number of
slices, and b) we haven't yet exported the code to ask for reduced slice
configurations.

Due both of the above there was no impact from this incorrect programming
but we should still fix it.

2)

Due subslice count bitfield being only three bits wide and furthermore
capped to a maximum documented value of four, special programming
workaround is needed to enable more than four subslices.

With this programming driver has to consider the GT configuration as
2x4x8, while the hardware internally translates this to 1x8x8.

A limitation stemming from this is that either a subslice count between
one and four can be selected, or a subslice count equaling the total
number of subslices in all selected slices. In other words, odd subslice
counts greater than four are impossible, as are odd subslice counts
greater than a single slice subslice count.

This also had no impact in the current code base due breakage from 1)
always reqesting more than one slice.

While fixing this we also add some asserts to flag up any future bitfield
overflows.

v2:
 * Use a local in all branches for clarity. (Lionel)

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Bspec: 12247
Reported-by: tony.ye@intel.com
Suggested-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Cc: tony.ye@intel.com
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180903113007.2643-1-tvrtko.ursulin@linux.intel.com
2018-09-04 14:49:46 +01:00
Chris Wilson
06348d3086 drm/i915/ringbuffer: Move double invalidate to after pd flush
Continuing the fun of trying to find exactly the delay that is
sufficient to ensure that the page directory is fully loaded between
context switches, move the extra flush added in commit 70b73f9ac1
("drm/i915/ringbuffer: Delay after invalidating gen6+ xcs") to just
after we flush the pd. Entirely based on the empirical data of running
failing tests in a loop until we survive a day (before the mtbf is 10-30
minutes).

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=107769
References: 70b73f9ac1 ("drm/i915/ringbuffer: Delay after invalidating gen6+ xcs")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180904063802.13880-1-chris@chris-wilson.co.uk
2018-09-04 14:28:51 +01:00
Chris Wilson
7ef4ac6ed9 drm/i915: Double check we didn't miss an unclaimed register access
Currently, if the user has enabled mmio-debug around each register
access, we presume that we have then checked them all. However, it is
still possible through omission (raw register access) or external
interaction that the unclaimed access was not highlighted.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180904111732.24266-1-chris@chris-wilson.co.uk
2018-09-04 14:28:51 +01:00
Ville Syrjälä
9f9d594d95 drm/i915: Fix ICL+ HDMI clock readout
Copy the 38.4 vs. 19.2 MHz ref clock exception from the dpll
mgr into the clock readout function as well.

v2: Refactor the code into a common function
    s/is_icl/gen11+/ (Rodrigo)

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=107722
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180903142841.14627-1-ville.syrjala@linux.intel.com
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2018-09-04 16:15:49 +03:00
Souptick Joarder
b9a40816fe Document/gpu: Use new vm_fault_t type
We have introduce new return type vm_fault_t for
fault handler. Update the document for the same.

Signed-off-by: Souptick Joarder <jrdr.linux@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20180904041505.GA2712@jordon-HP-15-Notebook-PC
2018-09-04 15:07:13 +02:00
Ariel Levkovich
09adbb5dd0 net/mlx5: Add memic command opcode to command checker
Adding the alloc/dealloc memic FW command opcodes to
avoid "unknown command" prints in the command string
converter and internal error status handler.

Signed-off-by: Ariel Levkovich <lariel@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
2018-09-04 15:03:17 +03:00
Moni Shoua
aa7e80b220 net/mlx5: Fix atomic_mode enum values
The field atomic_mode is 4 bits wide and therefore can hold values
from 0x0 to 0xf. Remove the unnecessary 20 bit shift that made the values
be incorrect. While that, remove unused enum values.

Fixes: 57cda166bb ("net/mlx5: Add DCT command interface")
Signed-off-by: Moni Shoua <monis@mellanox.com>
Reviewed-by: Artemy Kovalyov <artemyko@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
2018-09-04 15:03:06 +03:00
Takashi Iwai
d873d5ea89 ALSA: mips: Cleanup indirect PCM helper usages
We shouldn't set up the indirect PCM parameters at trigger but they
should be set at prepare.  Also, remove a useless debug message, too.

Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-09-04 12:13:46 +02:00
Takashi Iwai
b81e7732ce ALSA: cs46xx: Use SNDRV_PCM_INFO_SYNC_APPLPTR info flag
The recently introduced PCM info flag assures the call of ack ops at
each applptr change, and this is mandatory for the indirect PCM
helpers.

Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-09-04 12:13:40 +02:00
Takashi Iwai
10a23f614d ALSA: emu10k1: Use SNDRV_PCM_INFO_SYNC_APPLPTR info flag
The recently introduced PCM info flag assures the call of ack ops at
each applptr change, and this is mandatory for the indirect PCM
helpers.

Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-09-04 12:13:34 +02:00
Takashi Iwai
dc0d1c4519 ALSA: mips: Use SNDRV_PCM_INFO_SYNC_APPLPTR info flag
The recently introduced PCM info flag assures the call of ack ops at
each applptr change, and this is mandatory for the indirect PCM
helpers.

Also, with the proper ack callback, we need no longer prefill at
trigger start.  The relevant code can be killed.

Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-09-04 12:13:27 +02:00
Takashi Iwai
38ce57ad16 ALSA: rme32: Use SNDRV_PCM_INFO_SYNC_APPLPTR info flag
The recently introduced PCM info flag assures the call of ack ops at
each applptr change, and this is mandatory for the indirect PCM
helpers.

Also, with the proper ack callback, we need no longer prefill at
trigger start.  The relevant code can be killed.

Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-09-04 12:13:09 +02:00
Will Deacon
a6d60245d6 asm-generic/tlb: Track which levels of the page tables have been cleared
It is common for architectures with hugepage support to require only a
single TLB invalidation operation per hugepage during unmap(), rather than
iterating through the mapping at a PAGE_SIZE increment. Currently,
however, the level in the page table where the unmap() operation occurs
is not stored in the mmu_gather structure, therefore forcing
architectures to issue additional TLB invalidation operations or to give
up and over-invalidate by e.g. invalidating the entire TLB.

Ideally, we could add an interval rbtree to the mmu_gather structure,
which would allow us to associate the correct mapping granule with the
various sub-mappings within the range being invalidated. However, this
is costly in terms of book-keeping and memory management, so instead we
approximate by keeping track of the page table levels that are cleared
and provide a means to query the smallest granule required for invalidation.

Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
2018-09-04 11:08:27 +01:00
Peter Zijlstra
22a61c3c4f asm-generic/tlb: Track freeing of page-table directories in struct mmu_gather
Some architectures require different TLB invalidation instructions
depending on whether it is only the last-level of page table being
changed, or whether there are also changes to the intermediate
(directory) entries higher up the tree.

Add a new bit to the flags bitfield in struct mmu_gather so that the
architecture code can operate accordingly if it's the intermediate
levels being invalidated.

Acked-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
2018-09-04 11:08:26 +01:00
Will Deacon
faaadaf315 asm-generic/tlb: Guard with #ifdef CONFIG_MMU
The inner workings of the mmu_gather-based TLB invalidation mechanism
are not relevant to nommu configurations, so guard them with an #ifdef.
This allows us to implement future functions using static inlines
without breaking the build.

Acked-by: Nicholas Piggin <npiggin@gmail.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
2018-09-04 11:08:26 +01:00
Janosch Frank
df88f3181f KVM: s390: Properly lock mm context allow_gmap_hpage_1m setting
We have to do down_write on the mm semaphore to set a bitfield in the
mm context.

Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Fixes: a4499382 ("KVM: s390: Add huge page enablement control")
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2018-09-04 11:40:26 +02:00
Pierre Morel
204c972456 KVM: s390: vsie: copy wrapping keys to right place
Copy the key mask to the right offset inside the shadow CRYCB

Fixes: bbeaa58b3 ("KVM: s390: vsie: support aes dea wrapping keys")
Signed-off-by: Pierre Morel <pmorel@linux.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Cc: stable@vger.kernel.org # v4.8+
Message-Id: <1535019956-23539-2-git-send-email-pmorel@linux.ibm.com>
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2018-09-04 11:26:11 +02:00
Janosch Frank
a11bdb1a6b KVM: s390: Fix pfmf and conditional skey emulation
We should not return with a lock.
We also have to increase the address when we do page clearing.

Fixes: bd096f6443 ("KVM: s390: Add skey emulation fault handling")
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Message-Id: <20180830081355.59234-1-frankja@linux.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2018-09-04 11:24:43 +02:00
Ingo Franzki
b81126e01a s390/crypto: Fix return code checking in cbc_paes_crypt()
The return code of cpacf_kmc() is less than the number of
bytes to process in case of an error, not greater.
The crypt routines for the other cipher modes already have
this correctly.

Cc: stable@vger.kernel.org # v4.11+
Fixes: 2793784307 ("s390/crypt: Add protected key AES module")
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Acked-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2018-09-04 10:58:17 +02:00
Sowmini Varadhan
782710e333 xfrm: reset crypto_done when iterating over multiple input xfrms
We only support one offloaded xfrm (we do not have devices that
can handle more than one offload), so reset crypto_done in
xfrm_input() when iterating over multiple transforms in xfrm_input,
so that we can invoke the appropriate x->type->input for the
non-offloaded transforms

Fixes: d77e38e612 ("xfrm: Add an IPsec hardware offloading API")
Signed-off-by: Sowmini Varadhan <sowmini.varadhan@oracle.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2018-09-04 10:27:07 +02:00
Sowmini Varadhan
bfc0698beb xfrm: reset transport header back to network header after all input transforms ahave been applied
A policy may have been set up with multiple transforms (e.g., ESP
and ipcomp). In this situation, the ingress IPsec processing
iterates in xfrm_input() and applies each transform in turn,
processing the nexthdr to find any additional xfrm that may apply.

This patch resets the transport header back to network header
only after the last transformation so that subsequent xfrms
can find the correct transport header.

Fixes: 7785bba299 ("esp: Add a software GRO codepath")
Suggested-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sowmini Varadhan <sowmini.varadhan@oracle.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2018-09-04 10:26:30 +02:00
Gustavo A. R. Silva
cf5652c962 orinoco_usb: fix spelling mistake in fall-through annotation
Replace "fall though" with a proper "fall through" annotation.

This fix is part of the ongoing efforts to enabling
-Wimplicit-fallthrough

Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-09-04 11:18:10 +03:00
Kevin Lo
b9bcce366b rtlwifi: remove set but unused variables
Remove set but unused variables from _rtl88ee_hw_configure() and
_rtl8723e_hw_configure().

Signed-off-by: Kevin Lo <kevlo@kevlo.org>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-09-04 11:17:43 +03:00
YueHaibing
ec7eccf7ad rsi: remove set but not used variables 'header_size' and 'tx_params'
Fixes gcc '-Wunused-but-set-variable' warning:

drivers/net/wireless/rsi/rsi_91x_hal.c: In function 'rsi_send_data_pkt':
drivers/net/wireless/rsi/rsi_91x_hal.c:288:5: warning:
 variable 'header_size' set but not used [-Wunused-but-set-variable]

'tx_params' only used for 'header_size' dereferenced,so also
can be removed.

Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-09-04 11:17:05 +03:00
Igor Stoppa
7e41fb5045 wireless: remove unnecessary unlikely()
Both WARN_ON() and WARN_ON_ONCE() already contain unlikely().

Signed-off-by: Igor Stoppa <igor.stoppa@huawei.com>
Cc: Kalle Valo <kvalo@codeaurora.org>
Cc: Christian Lamparter <chunkeey@googlemail.com>
Cc: Michal Kazior <michal.kazior@tieto.com>
Cc: Larry Finger <Larry.Finger@lwfinger.net>
Cc: Linux Kernel Mailing List <linux-kernel@vger.kernel.org>
Cc: Linux Wireless Mailing List <linux-wireless@vger.kernel.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-09-04 11:16:33 +03:00
Aleksei Mamlin
514502c3a7 rtl8xxxu: Add rtl8188ctv support
The Realtek rtl8188ctv (0x0bda:0x018a) is a highly integrated single-chip
WLAN USB2.0 network interface controller.

Currently rtl8188ctv is supported by rtlwifi driver.
It is similar to the rtl8188cus(0x0bda:0x818a) and uses the same config.

Signed-off-by: Aleksei Mamlin <mamlinav@gmail.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-09-04 11:16:01 +03:00
Kristian Evensen
b37b30afc2 mt76: Enable NL80211_EXT_FEATURE_CQM_RSSI_LIST
Enable the use of CQM_RSSI_LIST with mt76-devices. The change has been
tested with the mt7602, mt7603 and mt7621 PCI wifi-cards. I passed a
list of RSSI thresholds to the driver, and when disconnecting/connecting
the antenna(s) I got an event each time the RSSI went above/below a
threshold.

While I have not been able to test the change with any of the mt76
USB-devices (no access to a device), the RX RSSI management code is
shared between the two device types. Thus, CQM should also work with the
mt76 USB-devices.

Signed-off-by: Kristian Evensen <kristian.evensen@gmail.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-09-04 11:14:02 +03:00
Lorenzo Bianconi
01b302cd58 mt76x0: remove unused routines for usb_buff alloc/free
Remove the following unused routines for usb buffer
allocation/free/submit:
- mt76x0_usb_alloc_buf
- mt76x0_usb_free_buf
- mt76x0_usb_submit_buf

Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-09-04 11:09:34 +03:00
Lorenzo Bianconi
a0b65ca60e mt76x0: use mt76u_mcu_fw_send_data for fw uploading
Use mt76u_mcu_fw_send_data utility routine for firmware uploading and
remove unused __mt76x0_dma_fw/mt76x0_dma_fw functions

Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-09-04 11:09:30 +03:00
Lorenzo Bianconi
0e3612e06b mt76x0: remove unused mt76x0_mcu structure
Remove no longer used mt76x0_mcu data structure

Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-09-04 11:09:26 +03:00
Lorenzo Bianconi
6f4796b706 mt76x0: use mt76u_mcu_send_msg utility routine to send fw cmds
Use mt76u_mcu_send_msg/__mt76u_mcu_send_msg utility routines to
send commands to usb mcu. Remove following unused routines:
- mt76x0_mcu_wait_resp
- __mt76x0_mcu_msg_send
- mt76x0_mcu_msg_send
- mt76x0_dma_skb_wrap_cmd
- trace_mt_mcu_msg_send_cs
- mt76x0_mcu_cmd_deinit

Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-09-04 11:09:23 +03:00
Lorenzo Bianconi
876d3d02ee mt76x0: remove unused mt76x0_wait_asic_ready routine
Delete core.c source file since, removing mt76x0_wait_asic_ready
routine, it is no longer needed

Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-09-04 11:09:19 +03:00
Lorenzo Bianconi
172222cff0 mt76x0: remove mt76x0_vendor_request routine
Remove mt76x0_vendor_request routine and use
mt76u_vendor_request utility function from mt76-usb
layer in mt76x0_upload_firmware

Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-09-04 11:09:14 +03:00
Lorenzo Bianconi
73d411e2d4 mt76x0: remove mt76x0_complete_urb routine
Remove mt76x0_complete_urb routine and use mt76u_mcu_complete_urb utility
function as usb mcu completion handler

Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-09-04 11:09:13 +03:00
Lorenzo Bianconi
ad27c4ae0b mt76x0: use shared mt76 usb mcu completion
Use mt76 usb shared completion data structure in
mt76x0_mcu_wait_resp routine and remove mt76x0
private one

Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-09-04 11:09:07 +03:00
Lorenzo Bianconi
84740d5dc6 mt76x0: remove mt76x0_mcu_msg_alloc routine
Remove mt76x0_mcu_msg_alloc duplicated routine and use mt76u_mcu_msg_alloc
utility function for usb mcu message allocation

Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-09-04 11:09:03 +03:00
Lorenzo Bianconi
72750efddb mt76x0: remove mt76x0_vendor_single_wr routine
Remove mt76x0_vendor_single_wr routine and use mt76u_single_wr
utility function for mcu firmware loading

Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-09-04 11:08:59 +03:00
Lorenzo Bianconi
e9fa647a0a mt76x0: remove mt76x0_vendor_reset routine
Remove mt76x0_vendor_reset duplicated routine and use mt76u_mcu_fw_reset
utility function for mcu fw reset

Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-09-04 11:08:56 +03:00
Lorenzo Bianconi
795dbf0fd2 mt76x0: use mt76u_init for bus initialization
Use mt76u_init utility routine for usb initialization.
Moreover remove following unused routines:
- mt76x0_rr
- mt76x0_wr
- mt76x0_rmw
- mt76x0_wr_copy
- mt76x0_assign_pipes

Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-09-04 11:08:50 +03:00
Lorenzo Bianconi
851ab66e29 mt76: add multiple regs read support to usb_mcu layer
Introduce multiple regs read support to mcu layer in mt76-usb module.
Multiple regs read will be reused by mt76x0 driver in usb mcu layer
unification between mt76x0 and mt76x2u drivers

Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-09-04 11:08:49 +03:00