Currently the calculation of max packet size limit for IN endpoints is
too restrictive. This prevents a matching of a capable hardware endpoint
during configuration. Below is the minimum recommended HW configuration
to support a particular endpoint setup from the databook:
For OUT endpoints, the databook recommended the minimum RxFIFO size to
be at least 3x MaxPacketSize + 3x setup packets size (8 bytes each) +
clock crossing margin (16 bytes).
For IN endpoints, the databook recommended the minimum TxFIFO size to be
at least 3x MaxPacketSize for endpoints that support burst. If the
endpoint doesn't support burst or when the device is operating in USB
2.0 mode, a minimum TxFIFO size of 2x MaxPacketSize is recommended.
Base on these recommendations, we can calculate the MaxPacketSize limit
of each endpoint. This patch revises the IN endpoint MaxPacketSize limit
and also sets the MaxPacketSize limit for OUT endpoints.
Reference: Databook 3.30a section 3.2.2 and 3.2.3
Signed-off-by: Thinh Nguyen <thinhn@synopsys.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
Change the macro name DWC3_GTXFIFOSIZ_TXFDEF to DWC3_GTXFIFOSIZ_TXFDEP
to match with the register name GTXFIFOSIZ.TXFDEP.
Fixes: 457e84b662 ("usb: dwc3: gadget: dynamically re-size TxFifos")
Fixes: 0cab8d26d6 ("usb: dwc3: Update DWC_usb31 GTXFIFOSIZ reg fields")
Signed-off-by: Thinh Nguyen <thinhn@synopsys.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
When building with Clang + -Wtautological-pointer-compare:
drivers/usb/gadget/udc/bdc/bdc_ep.c:543:28: warning: comparison of
address of 'req->queue' equal to a null pointer is always false
[-Wtautological-pointer-compare]
if (req == NULL || &req->queue == NULL || &req->usb_req == NULL)
~~~~~^~~~~ ~~~~
drivers/usb/gadget/udc/bdc/bdc_ep.c:543:51: warning: comparison of
address of 'req->usb_req' equal to a null pointer is always false
[-Wtautological-pointer-compare]
if (req == NULL || &req->queue == NULL || &req->usb_req == NULL)
~~~~~^~~~~~~ ~~~~
2 warnings generated.
As it notes, these statements will always evaluate to false so remove
them.
Fixes: efed421a94 ("usb: gadget: Add UDC driver for Broadcom USB3.0 device controller IP BDC")
Link: https://github.com/ClangBuiltLinux/linux/issues/749
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
In the future we want to be able to build the MediaTek pinctrl driver,
based on paris, as kernel module. This patch allows pinctrl-paris.c, the
external interrupt controller mtk-eint.c, and pinctrl-mtk-common-v2.c to
be loadable as module.
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Light Hsieh <light.hsieh@mediatek.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Link: https://lore.kernel.org/r/9feeb04805e5a406fe22a92e3f280abda39ddda4.1586289920.git.sean.wang@mediatek.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The gpiolib ACPI code uses 2 initcall-s and the called function
(and used DMI table) is missing __init(const) markers.
This commit fixes this freeing up some extra memory once the kernel
has completed booting.
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20200325103956.109284-2-hdegoede@redhat.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Message logged by 'dev_xxx()' or 'pr_xxx()' should end with a '\n'.
While at it, I've introduced a few pr_cont that looked logical to me.
Fixes: 10b4f09491 ("crypto: marvell - add the Virtual Function driver for CPT")
Fixes: d9110b0b01 ("crypto: marvell - add support for OCTEON TX CPT engine")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
There are two problems in crypto_spawn_alg. First of all it may
return spawn->alg even if spawn->dead is set. This results in a
double-free as detected by syzbot.
Secondly the setting of the DYING flag is racy because we hold
the read-lock instead of the write-lock. We should instead call
crypto_shoot_alg in a safe manner by gaining a refcount, dropping
the lock, and then releasing the refcount.
This patch fixes both problems.
Reported-by: syzbot+fc0674cde00b66844470@syzkaller.appspotmail.com
Fixes: 4f87ee118d ("crypto: api - Do not zap spawn->alg")
Fixes: 73669cc556 ("crypto: api - Fix race condition in...")
Cc: <stable@vger.kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
DMADEVICES is the top-level option for the slave DMA
subsystem, and should not be selected by device drivers,
as this can cause circular dependencies such as:
drivers/net/ethernet/freescale/Kconfig:6:error: recursive dependency detected!
drivers/net/ethernet/freescale/Kconfig:6: symbol NET_VENDOR_FREESCALE depends on PPC_BESTCOMM
drivers/dma/bestcomm/Kconfig:6: symbol PPC_BESTCOMM depends on DMADEVICES
drivers/dma/Kconfig:6: symbol DMADEVICES is selected by CRYPTO_DEV_SP_CCP
drivers/crypto/ccp/Kconfig:10: symbol CRYPTO_DEV_SP_CCP depends on CRYPTO
crypto/Kconfig:16: symbol CRYPTO is selected by LIBCRC32C
lib/Kconfig:222: symbol LIBCRC32C is selected by LIQUIDIO
drivers/net/ethernet/cavium/Kconfig:65: symbol LIQUIDIO depends on PTP_1588_CLOCK
drivers/ptp/Kconfig:8: symbol PTP_1588_CLOCK is implied by FEC
drivers/net/ethernet/freescale/Kconfig:23: symbol FEC depends on NET_VENDOR_FREESCALE
The LIQUIDIO driver causing this problem is addressed in a
separate patch, but this change is needed to prevent it from
happening again.
Using "depends on DMADEVICES" is what we do for all other
implementations of slave DMA controllers as well.
Fixes: b3c2fee5d6 ("crypto: ccp - Ensure all dependencies are specified")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Currently after any algorithm is registered and tested, there's an
unnecessary request_module("cryptomgr") even if it's already loaded.
Also, CRYPTO_MSG_ALG_LOADED is sent twice, and thus if the algorithm is
"crct10dif", lib/crc-t10dif.c replaces the tfm twice rather than once.
This occurs because CRYPTO_MSG_ALG_LOADED is sent using
crypto_probing_notify(), which tries to load "cryptomgr" if the
notification is not handled (NOTIFY_DONE). This doesn't make sense
because "cryptomgr" doesn't handle this notification.
Fix this by using crypto_notify() instead of crypto_probing_notify().
Fixes: dd8b083f9a ("crypto: api - Introduce notifier for new crypto algorithms")
Cc: <stable@vger.kernel.org> # v4.20+
Cc: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The function “platform_get_irq” can log an error already.
Thus omit a redundant message for the exception handling in the
calling function.
This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Acked-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The function “platform_get_irq” can log an error already.
Thus omit a redundant message for the exception handling in the
calling function.
This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The function “platform_get_irq” can log an error already.
Thus omit a redundant message for the exception handling in the
calling function.
This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
When something goes wrong, platform_get_irq() will print an error message,
so in order to avoid the situation of repeat output，we should remove
dev_err here.
Signed-off-by: Tang Bin <tangbin@cmss.chinamobile.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
It is not working well to determine whether the queue is empty based on
whether the used count is 0. It is more stable to get if the queue is
stopping by checking if the tail pointer of the send queue and the
completion queue are equal.
Signed-off-by: Yang Shen <shenyang39@huawei.com>
Signed-off-by: Shukun Tan <tanshukun1@huawei.com>
Reviewed-by: Zhou Wang <wangzhou1@hisilicon.com>
Reviewed-by: Zaibo Xu <xuzaibo@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add support for controller reset in SEC driver.
Signed-off-by: Yang Shen <shenyang39@huawei.com>
Signed-off-by: Shukun Tan <tanshukun1@huawei.com>
Reviewed-by: Zhou Wang <wangzhou1@hisilicon.com>
Reviewed-by: Zaibo Xu <xuzaibo@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add support for the controller reset in HPRE driver.
Signed-off-by: Hui Tang <tanghui20@huawei.com>
Signed-off-by: Shukun Tan <tanshukun1@huawei.com>
Reviewed-by: Zhou Wang <wangzhou1@hisilicon.com>
Reviewed-by: Zaibo Xu <xuzaibo@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add the main implementation of the controller reset interface, which is
roughly divided into three parts, stop, reset, and reinitialization.
Signed-off-by: Shukun Tan <tanshukun1@huawei.com>
Reviewed-by: Zhou Wang <wangzhou1@hisilicon.com>
Reviewed-by: Zaibo Xu <xuzaibo@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The vfs_num module parameter has been used in zip driver, this patch adds
this for HPRE and SEC driver.
Signed-off-by: Hao Fang <fanghao11@huawei.com>
Signed-off-by: Shukun Tan <tanshukun1@huawei.com>
Reviewed-by: Zhou Wang <wangzhou1@hisilicon.com>
Reviewed-by: Zaibo Xu <xuzaibo@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Clean the duplicate SR-IOV related codes, put all into qm.c.
Signed-off-by: Shukun Tan <tanshukun1@huawei.com>
Reviewed-by: Zhou Wang <wangzhou1@hisilicon.com>
Reviewed-by: Zaibo Xu <xuzaibo@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
We plan to move vfs_num related code into qm.c, put the param
vfs_num into struct hisi_qm first.
Signed-off-by: Shukun Tan <tanshukun1@huawei.com>
Reviewed-by: Zhou Wang <wangzhou1@hisilicon.com>
Reviewed-by: Zaibo Xu <xuzaibo@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
I work for Arm on maintaining the TrustZone CryptoCell TRNG driver.
Signed-off-by: Hadar Gat <hadar.gat@arm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The Arm CryptoCell is a hardware security engine. This patch adds DT
bindings for its TRNG (True Random Number Generator) engine.
Signed-off-by: Hadar Gat <hadar.gat@arm.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
For skcipher algorithms, the input, output HW S/G tables
look like this: [IV, src][dst, IV]
Now, we can have 2 conditions here:
- there is no IV;
- src and dst are equal (in-place encryption) and scattered
and the error is an "off-by-one" in the HW S/G table.
This issue was seen with KASAN:
BUG: KASAN: slab-out-of-bounds in skcipher_edesc_alloc+0x95c/0x1018
Read of size 4 at addr ffff000022a02958 by task cryptomgr_test/321
CPU: 2 PID: 321 Comm: cryptomgr_test Not tainted
5.6.0-rc1-00165-ge4ef8383-dirty #4
Hardware name: LS1046A RDB Board (DT)
Call trace:
dump_backtrace+0x0/0x260
show_stack+0x14/0x20
dump_stack+0xe8/0x144
print_address_description.isra.11+0x64/0x348
__kasan_report+0x11c/0x230
kasan_report+0xc/0x18
__asan_load4+0x90/0xb0
skcipher_edesc_alloc+0x95c/0x1018
skcipher_encrypt+0x84/0x150
crypto_skcipher_encrypt+0x50/0x68
test_skcipher_vec_cfg+0x4d4/0xc10
test_skcipher_vec+0x178/0x1d8
alg_test_skcipher+0xec/0x230
alg_test.part.44+0x114/0x4a0
alg_test+0x1c/0x60
cryptomgr_test+0x34/0x58
kthread+0x1b8/0x1c0
ret_from_fork+0x10/0x18
Allocated by task 321:
save_stack+0x24/0xb0
__kasan_kmalloc.isra.10+0xc4/0xe0
kasan_kmalloc+0xc/0x18
__kmalloc+0x178/0x2b8
skcipher_edesc_alloc+0x21c/0x1018
skcipher_encrypt+0x84/0x150
crypto_skcipher_encrypt+0x50/0x68
test_skcipher_vec_cfg+0x4d4/0xc10
test_skcipher_vec+0x178/0x1d8
alg_test_skcipher+0xec/0x230
alg_test.part.44+0x114/0x4a0
alg_test+0x1c/0x60
cryptomgr_test+0x34/0x58
kthread+0x1b8/0x1c0
ret_from_fork+0x10/0x18
Freed by task 0:
(stack is not available)
The buggy address belongs to the object at ffff000022a02800
which belongs to the cache dma-kmalloc-512 of size 512
The buggy address is located 344 bytes inside of
512-byte region [ffff000022a02800, ffff000022a02a00)
The buggy address belongs to the page:
page:fffffe00006a8000 refcount:1 mapcount:0 mapping:ffff00093200c400
index:0x0 compound_mapcount: 0
flags: 0xffff00000010200(slab|head)
raw: 0ffff00000010200 dead000000000100 dead000000000122 ffff00093200c400
raw: 0000000000000000 0000000080100010 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffff000022a02800: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
ffff000022a02880: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>ffff000022a02900: 00 00 00 00 00 00 00 00 00 00 fc fc fc fc fc fc
^
ffff000022a02980: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
ffff000022a02a00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
Fixes: 334d37c9e2 ("crypto: caam - update IV using HW support")
Cc: <stable@vger.kernel.org> # v5.3+
Signed-off-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Reviewed-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Here's the KASAN report:
BUG: KASAN: use-after-free in ahash_done+0xdc/0x3b8
Read of size 1 at addr ffff00002303f010 by task swapper/0/0
CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.6.0-rc1-00162-gfcb90d5 #59
Hardware name: LS1046A RDB Board (DT)
Call trace:
dump_backtrace+0x0/0x260
show_stack+0x14/0x20
dump_stack+0xe8/0x144
print_address_description.isra.11+0x64/0x348
__kasan_report+0x11c/0x230
kasan_report+0xc/0x18
__asan_load1+0x5c/0x68
ahash_done+0xdc/0x3b8
caam_jr_dequeue+0x390/0x608
tasklet_action_common.isra.13+0x1ec/0x230
tasklet_action+0x24/0x30
efi_header_end+0x1a4/0x370
irq_exit+0x114/0x128
__handle_domain_irq+0x80/0xe0
gic_handle_irq+0x50/0xa0
el1_irq+0xb8/0x180
cpuidle_enter_state+0xa4/0x490
cpuidle_enter+0x48/0x70
call_cpuidle+0x44/0x70
do_idle+0x304/0x338
cpu_startup_entry+0x24/0x40
rest_init+0xf8/0x10c
arch_call_rest_init+0xc/0x14
start_kernel+0x774/0x7b4
Allocated by task 263:
save_stack+0x24/0xb0
__kasan_kmalloc.isra.10+0xc4/0xe0
kasan_kmalloc+0xc/0x18
__kmalloc+0x178/0x2b8
ahash_edesc_alloc+0x58/0x1f8
ahash_final_no_ctx+0x94/0x6e8
ahash_final+0x24/0x30
crypto_ahash_op+0x58/0xb0
crypto_ahash_final+0x30/0x40
do_ahash_op+0x2c/0xa0
test_ahash_vec_cfg+0x894/0x9e0
test_hash_vec_cfg+0x6c/0x88
test_hash_vec+0xfc/0x1e0
__alg_test_hash+0x1ac/0x368
alg_test_hash+0xf8/0x1c8
alg_test.part.44+0x114/0x4a0
alg_test+0x1c/0x60
cryptomgr_test+0x34/0x58
kthread+0x1b8/0x1c0
ret_from_fork+0x10/0x18
Freed by task 0:
save_stack+0x24/0xb0
__kasan_slab_free+0x10c/0x188
kasan_slab_free+0x10/0x18
kfree+0x7c/0x298
ahash_done+0xd4/0x3b8
caam_jr_dequeue+0x390/0x608
tasklet_action_common.isra.13+0x1ec/0x230
tasklet_action+0x24/0x30
efi_header_end+0x1a4/0x370
The buggy address belongs to the object at ffff00002303f000
which belongs to the cache dma-kmalloc-128 of size 128
The buggy address is located 16 bytes inside of
128-byte region [ffff00002303f000, ffff00002303f080)
The buggy address belongs to the page:
page:fffffe00006c0fc0 refcount:1 mapcount:0 mapping:ffff00093200c000 index:0x0
flags: 0xffff00000000200(slab)
raw: 0ffff00000000200 dead000000000100 dead000000000122 ffff00093200c000
raw: 0000000000000000 0000000080100010 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffff00002303ef00: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
ffff00002303ef80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>ffff00002303f000: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
^
ffff00002303f080: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
ffff00002303f100: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
Fixes: 21b014f038 ("crypto: caam - add crypto_engine support for HASH algorithms")
Signed-off-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Here's the KASAN report:
BUG: KASAN: use-after-free in aead_crypt_done+0x60/0xd8
Read of size 1 at addr ffff00002303f014 by task swapper/0/0
CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.6.0-rc1-00162-gfcb90d5 #58
Hardware name: LS1046A RDB Board (DT)
Call trace:
dump_backtrace+0x0/0x260
show_stack+0x14/0x20
dump_stack+0xe8/0x144
print_address_description.isra.11+0x64/0x348
__kasan_report+0x11c/0x230
kasan_report+0xc/0x18
__asan_load1+0x5c/0x68
aead_crypt_done+0x60/0xd8
caam_jr_dequeue+0x390/0x608
tasklet_action_common.isra.13+0x1ec/0x230
tasklet_action+0x24/0x30
efi_header_end+0x1a4/0x370
irq_exit+0x114/0x128
__handle_domain_irq+0x80/0xe0
gic_handle_irq+0x50/0xa0
el1_irq+0xb8/0x180
_raw_spin_unlock_irq+0x2c/0x78
finish_task_switch+0xa4/0x2f8
__schedule+0x3a4/0x890
schedule_idle+0x28/0x50
do_idle+0x22c/0x338
cpu_startup_entry+0x24/0x40
rest_init+0xf8/0x10c
arch_call_rest_init+0xc/0x14
start_kernel+0x774/0x7b4
Allocated by task 263:
save_stack+0x24/0xb0
__kasan_kmalloc.isra.10+0xc4/0xe0
kasan_kmalloc+0xc/0x18
__kmalloc+0x178/0x2b8
aead_edesc_alloc+0x1b4/0xbf0
ipsec_gcm_encrypt+0xd4/0x140
crypto_aead_encrypt+0x50/0x68
test_aead_vec_cfg+0x498/0xec0
test_aead_vec+0x110/0x200
alg_test_aead+0xfc/0x680
alg_test.part.44+0x114/0x4a0
alg_test+0x1c/0x60
cryptomgr_test+0x34/0x58
kthread+0x1b8/0x1c0
ret_from_fork+0x10/0x18
Freed by task 0:
save_stack+0x24/0xb0
__kasan_slab_free+0x10c/0x188
kasan_slab_free+0x10/0x18
kfree+0x7c/0x298
aead_crypt_done+0x58/0xd8
caam_jr_dequeue+0x390/0x608
tasklet_action_common.isra.13+0x1ec/0x230
tasklet_action+0x24/0x30
efi_header_end+0x1a4/0x370
The buggy address belongs to the object at ffff00002303f000
which belongs to the cache dma-kmalloc-128 of size 128
The buggy address is located 20 bytes inside of
128-byte region [ffff00002303f000, ffff00002303f080)
The buggy address belongs to the page:
page:fffffe00006c0fc0 refcount:1 mapcount:0 mapping:ffff00093200c000 index:0x0
flags: 0xffff00000000200(slab)
raw: 0ffff00000000200 dead000000000100 dead000000000122 ffff00093200c000
raw: 0000000000000000 0000000080100010 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffff00002303ef00: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
ffff00002303ef80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>ffff00002303f000: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
^
ffff00002303f080: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
ffff00002303f100: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
Fixes: 1c24022667 ("crypto: caam - add crypto_engine support for AEAD algorithms")
Signed-off-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
ASB was failing to load on Turing GPUs when firmware is being loaded
from initramfs, leaving the GPU in an odd state and causing suspend/
resume to fail.
Add missing MODULE_FIRMWARE() lines for initramfs generators.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Cc: <stable@vger.kernel.org> # 5.6
syzbot writes:
> KASAN: use-after-free Read in dput (2)
>
> proc_fill_super: allocate dentry failed
> ==================================================================
> BUG: KASAN: use-after-free in fast_dput fs/dcache.c:727 [inline]
> BUG: KASAN: use-after-free in dput+0x53e/0xdf0 fs/dcache.c:846
> Read of size 4 at addr ffff88808a618cf0 by task syz-executor.0/8426
>
> CPU: 0 PID: 8426 Comm: syz-executor.0 Not tainted 5.6.0-next-20200412-syzkaller #0
> Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
> Call Trace:
> __dump_stack lib/dump_stack.c:77 [inline]
> dump_stack+0x188/0x20d lib/dump_stack.c:118
> print_address_description.constprop.0.cold+0xd3/0x315 mm/kasan/report.c:382
> __kasan_report.cold+0x35/0x4d mm/kasan/report.c:511
> kasan_report+0x33/0x50 mm/kasan/common.c:625
> fast_dput fs/dcache.c:727 [inline]
> dput+0x53e/0xdf0 fs/dcache.c:846
> proc_kill_sb+0x73/0xf0 fs/proc/root.c:195
> deactivate_locked_super+0x8c/0xf0 fs/super.c:335
> vfs_get_super+0x258/0x2d0 fs/super.c:1212
> vfs_get_tree+0x89/0x2f0 fs/super.c:1547
> do_new_mount fs/namespace.c:2813 [inline]
> do_mount+0x1306/0x1b30 fs/namespace.c:3138
> __do_sys_mount fs/namespace.c:3347 [inline]
> __se_sys_mount fs/namespace.c:3324 [inline]
> __x64_sys_mount+0x18f/0x230 fs/namespace.c:3324
> do_syscall_64+0xf6/0x7d0 arch/x86/entry/common.c:295
> entry_SYSCALL_64_after_hwframe+0x49/0xb3
> RIP: 0033:0x45c889
> Code: ad b6 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 7b b6 fb ff c3 66 2e 0f 1f 84 00 00 00 00
> RSP: 002b:00007ffc1930ec48 EFLAGS: 00000246 ORIG_RAX: 00000000000000a5
> RAX: ffffffffffffffda RBX: 0000000001324914 RCX: 000000000045c889
> RDX: 0000000020000140 RSI: 0000000020000040 RDI: 0000000000000000
> RBP: 000000000076bf00 R08: 0000000000000000 R09: 0000000000000000
> R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000003
> R13: 0000000000000749 R14: 00000000004ca15a R15: 0000000000000013
Looking at the code now that it the internal mount of proc is no
longer used it is possible to unmount proc. If proc is unmounted
the fields of the pid namespace that were used for filesystem
specific state are not reinitialized.
Which means that proc_self and proc_thread_self can be pointers to
already freed dentries.
The reported user after free appears to be from mounting and
unmounting proc followed by mounting proc again and using error
injection to cause the new root dentry allocation to fail. This in
turn results in proc_kill_sb running with proc_self and
proc_thread_self still retaining their values from the previous mount
of proc. Then calling dput on either proc_self of proc_thread_self
will result in double put. Which KASAN sees as a use after free.
Solve this by always reinitializing the filesystem state stored
in the struct pid_namespace, when proc is unmounted.
Reported-by: syzbot+72868dd424eb66c6b95f@syzkaller.appspotmail.com
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
Fixes: 69879c01a0 ("proc: Remove the now unnecessary internal mount of proc")
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
If the in-core buddy bitmap gets corrupted (or out of sync with the
block bitmap), issue a WARN_ON and try to recover. In most cases this
involves skipping trying to allocate out of a particular block group.
We can end up declaring the file system corrupted, which is fair,
since the file system probably should be checked before we proceed any
further.
Link: https://lore.kernel.org/r/20200414035649.293164-1-tytso@mit.edu
Google-Bug-Id: 34811296
Google-Bug-Id: 34639169
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Current wait times have proven to be too short to protect against inode
reuses that lead to metadata inconsistencies.
Now that we will retry the inode allocation if we can't find any
recently deleted inodes, it's a lot safer to increase the recently
deleted time from 5 seconds to a minute.
Link: https://lore.kernel.org/r/20200414023925.273867-1-tytso@mit.edu
Google-Bug-Id: 36602237
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Fix the following gcc warning:
fs/ext4/ext4_jbd2.c:341:30: warning: variable 'es' set but not used [-Wunused-but-set-variable]
struct ext4_super_block *es;
^~
Fixes: 2ea2fc775321 ("ext4: save all error info in save_error_info() and drop ext4_set_errno()")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Link: https://lore.kernel.org/r/20200402034759.29957-1-yanaijie@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Fix the following gcc warning:
fs/ext4/super.c:599:27: warning: variable 'es' set but not used [-Wunused-but-set-variable]
struct ext4_super_block *es;
^~
Fixes: 2ea2fc775321 ("ext4: save all error info in save_error_info() and drop ext4_set_errno()")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Link: https://lore.kernel.org/r/20200402033939.25303-1-yanaijie@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
We do not want to create initialized extents beyond end of file because
for e2fsck it is impossible to distinguish them from a case of corrupted
file size / extent tree and so it complains like:
Inode 12, i_size is 147456, should be 163840. Fix? no
Code in ext4_ext_convert_to_initialized() and
ext4_split_convert_extents() try to make sure it does not create
initialized extents beyond inode size however they check against
inode->i_size which is wrong. They should instead check against
EXT4_I(inode)->i_disksize which is the current inode size on disk.
That's what e2fsck is going to see in case of crash before all dirty
data is written. This bug manifests as generic/456 test failure (with
recent enough fstests where fsx got fixed to properly pass
FALLOC_KEEP_SIZE_FL flags to the kernel) when run with dioread_lock
mount option.
CC: stable@vger.kernel.org
Fixes: 21ca087a38 ("ext4: Do not zero out uninitialized extents beyond i_size")
Reviewed-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Link: https://lore.kernel.org/r/20200331105016.8674-1-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
The documentation comments for ext4_read_block_bitmap_nowait and
ext4_read_inode_bitmap describe them as returning NULL on error, but
they return an ERR_PTR on error; update the documentation to match.
The documentation comment for ext4_wait_block_bitmap describes it as
returning 1 on error, but it returns -errno on error; update the
documentation to match.
Signed-off-by: Josh Triplett <josh@joshtriplett.org>
Reviewed-by: Ritesh Harani <riteshh@linux.ibm.com>
Link: https://lore.kernel.org/r/60a3f4996f4932c45515aaa6b75ca42f2a78ec9b.1585512514.git.josh@joshtriplett.org
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Since commit a8ac900b81 ("ext4: use non-movable memory for the
superblock") buffers for ext4 superblock were allocated using
the sb_bread_unmovable() helper which allocated buffer heads
out of non-movable memory blocks. It was necessarily to not block
page migrations and do not cause cma allocation failures.
However commit 85c8f176a6 ("ext4: preload block group descriptors")
broke this by introducing pre-reading of the ext4 superblock.
The problem is that __breadahead() is using __getblk() underneath,
which allocates buffer heads out of movable memory.
It resulted in page migration failures I've seen on a machine
with an ext4 partition and a preallocated cma area.
Fix this by introducing sb_breadahead_unmovable() and
__breadahead_gfp() helpers which use non-movable memory for buffer
head allocations and use them for the ext4 superblock readahead.
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Fixes: 85c8f176a6 ("ext4: preload block group descriptors")
Signed-off-by: Roman Gushchin <guro@fb.com>
Link: https://lore.kernel.org/r/20200229001411.128010-1-guro@fb.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Run generic/388 with journal data mode sometimes may trigger the warning
in ext4_invalidatepage. Actually, we should use the matching invalidatepage
in ext4_writepage.
Signed-off-by: yangerkun <yangerkun@huawei.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Ritesh Harjani <riteshh@linux.ibm.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20200226041002.13914-1-yangerkun@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Found a read performance issue when linux kernel page size is 64KB.
If linux kernel page size is 64KB and mount options cache=strict &
vers=2.1+, it does not support cifs_readpages(). Instead, it is using
cifs_readpage() and cifs_read() with maximum read IO size 16KB, which is
much slower than read IO size 1MB when negotiated SMB 2.1+. Since modern
SMB server supported SMB 2.1+ and Max Read Size can reach more than 64KB
(for example 1MB ~ 8MB), this patch check max_read instead of maxBuf to
determine whether server support readpages() and improve read performance
for page size 64KB & cache=strict & vers=2.1+, and for SMB1 it is more
cleaner to initialize server->max_read to server->maxBuf.
The client is a linux box with linux kernel 4.2.8,
page size 64KB (CONFIG_ARM64_64K_PAGES=y),
cpu arm 1.7GHz, and use mount.cifs as smb client.
The server is another linux box with linux kernel 4.2.8,
share a file '10G.img' with size 10GB,
and use samba-4.7.12 as smb server.
The client mount a share from the server with different
cache options: cache=strict and cache=none,
mount -tcifs //<server_ip>/Public /cache_strict -overs=3.0,cache=strict,username=<xxx>,password=<yyy>
mount -tcifs //<server_ip>/Public /cache_none -overs=3.0,cache=none,username=<xxx>,password=<yyy>
The client download a 10GbE file from the server across 1GbE network,
dd if=/cache_strict/10G.img of=/dev/null bs=1M count=10240
dd if=/cache_none/10G.img of=/dev/null bs=1M count=10240
Found that cache=strict (without patch) is slower read throughput and
smaller read IO size than cache=none.
cache=strict (without patch): read throughput 40MB/s, read IO size is 16KB
cache=strict (with patch): read throughput 113MB/s, read IO size is 1MB
cache=none: read throughput 109MB/s, read IO size is 1MB
Looks like if page size is 64KB,
cifs_set_ops() would use cifs_addr_ops_smallbuf instead of cifs_addr_ops,
/* check if server can support readpages */
if (cifs_sb_master_tcon(cifs_sb)->ses->server->maxBuf <
PAGE_SIZE + MAX_CIFS_HDR_SIZE)
inode->i_data.a_ops = &cifs_addr_ops_smallbuf;
else
inode->i_data.a_ops = &cifs_addr_ops;
maxBuf is came from 2 places, SMB2_negotiate() and CIFSSMBNegotiate(),
(SMB2_MAX_BUFFER_SIZE is 64KB)
SMB2_negotiate():
/* set it to the maximum buffer size value we can send with 1 credit */
server->maxBuf = min_t(unsigned int, le32_to_cpu(rsp->MaxTransactSize),
SMB2_MAX_BUFFER_SIZE);
CIFSSMBNegotiate():
server->maxBuf = le32_to_cpu(pSMBr->MaxBufferSize);
Page size 64KB and cache=strict lead to read_pages() use cifs_readpage()
instead of cifs_readpages(), and then cifs_read() using maximum read IO
size 16KB, which is much slower than maximum read IO size 1MB.
(CIFSMaxBufSize is 16KB by default)
/* FIXME: set up handlers for larger reads and/or convert to async */
rsize = min_t(unsigned int, cifs_sb->rsize, CIFSMaxBufSize);
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Jones Syue <jonessyue@qnap.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
We already dump these keys for SMB3, lets also dump it for SMB2
sessions so that we can use the session key in wireshark to check and validate
that the signatures are correct.
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
-----BEGIN PGP SIGNATURE-----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=dC6l
-----END PGP SIGNATURE-----
Merge tag 'efi-urgent-2020-04-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull EFI fixes from Ingo Molnar:
"Misc EFI fixes, including the boot failure regression caused by the
BSS section not being cleared by the loaders"
* tag 'efi-urgent-2020-04-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
efi/x86: Revert struct layout change to fix kexec boot regression
efi/x86: Don't remap text<->rodata gap read-only for mixed mode
efi/x86: Fix the deletion of variables in mixed mode
efi/libstub/file: Merge file name buffers to reduce stack usage
Documentation/x86, efi/x86: Clarify EFI handover protocol and its requirements
efi/arm: Deal with ADR going out of range in efi_enter_kernel()
efi/x86: Always relocate the kernel for EFI handover entry
efi/x86: Move efi stub globals from .bss to .data
efi/libstub/x86: Remove redundant assignment to pointer hdr
efi/cper: Use scnprintf() for avoiding potential buffer overflow
In commit 16ad3f4022 ("tipc: introduce variable window congestion
control"), we allow link window to change with the congestion avoidance
algorithm. However, there is a bug that during the slow-start if packet
retransmission occurs, the link will enter the fast-recovery phase, set
its window to the 'ssthresh' which is never less than 300, so the link
window suddenly increases to that limit instead of decreasing.
Consequently, two issues have been observed:
- For broadcast-link: it can leave a gap between the link queues that a
new packet will be inserted and sent before the previous ones, i.e. not
in-order.
- For unicast: the algorithm does not work as expected, the link window
jumps to the slow-start threshold whereas packet retransmission occurs.
This commit fixes the issues by avoiding such the link window increase,
but still decreasing if the 'ssthresh' is lowered.
Fixes: 16ad3f4022 ("tipc: introduce variable window congestion control")
Acked-by: Jon Maloy <jmaloy@redhat.com>
Signed-off-by: Tuong Lien <tuong.t.lien@dektech.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
