Add the device nodes for all SCIF and HSCIF serial ports on R-Car M3-W+.
Add the missing DMA properties to the already-present SCIF2 node.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Eugeniu Rosca <erosca@de.adit-jv.com>
OrangePi Lite2 has AP6255 BT+WIFI combo chip. Add support for it.
Signed-off-by: Sebastian Meyer <git-commit@mailhell.seb7.de>
[merged BT and WIFI patches and updated commit message]
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
As can be seen from OrangePi Lite 2 and One Plus schematics, VBUS pin on
USB OTG port is directly connected to 5 V power supply. This mean that
OTG port can safely operate only in host mode, even though these two
boards have ID pin connected.
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
OrangePi Lite2 and One Plus have GPIO ports powered by same power
supplies. Add them in common DT.
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
The PWR-LED on the bananapi m2 zero board is on when gpio PL10 is low.
This has been verified on a board and in the schematics [1].
[1]: http://wiki.banana-pi.org/Banana_Pi_BPI-M2_ZERO#Documents
Fixes: 8b8061fcbf ("ARM: dts: sun8i: h2+: add support for Banana Pi M2 Zero board")
Signed-off-by: Vincent Stehlé <vincent.stehle@laposte.net>
Cc: Icenowy Zheng <icenowy@aosc.io>
Cc: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
This file seems to be for R9A06G032 only. So replace reference to
R9A09G032 by R9A06G032 to avoid confusion.
AFAIK, R9A09G032 does'nt exist.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/20200413041709.3630-1-christophe.jaillet@wanadoo.fr
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
This patch adds support for r8a77961 (R-Car M3-W+).
To avoid confusion between R-Car M3-W (R8A77960) and R-Car M3-W+
(R8A77961), this patch also updates the comment of
"renesas,r8a7796-rcar-usb2-clock-sel".
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Link: https://lore.kernel.org/r/1585200608-30103-1-git-send-email-yoshihiro.shimoda.uh@renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
The H6 SoC contains a message box that can be used to send messages and
interrupts back and forth between the ARM application CPUs and the ARISC
coprocessor. Add a device tree node for it.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
The A64 SoC contains a message box that can be used to send messages and
interrupts back and forth between the ARM application CPUs and the ARISC
coprocessor. Add a device tree node for it.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
The H3 and H5 SoCs contain a message box that can be used to send
messages and interrupts back and forth between the ARM application CPUs
and the ARISC coprocessor. Add a device tree node for it.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
The A83T SoC contains a message box that can be used to send messages
and interrupts back and forth between the ARM application CPUs and the
ARISC coprocessor. Add a device tree node for it.
Tested-by: Ondrej Jirman <megous@megous.com>
Signed-off-by: Samuel Holland <samuel@sholland.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
OPP table value is get from orangepi lichee linux-3.4
kernel driver.
Signed-off-by: Qiang Yu <yuq825@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
There is a red LED marked as `GPIO_LED1` on the silkscreen and connected
to PE17 by default. So lets add this missing bit in the current hardware
description.
Signed-off-by: Petr Štetiar <ynezz@true.cz>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
There is new version of A20-OLinuXino-LIME with eMMC storage. The
card routing is the same as in A20-OLinuXino-LIME2-eMMC, so this
is basically copy/paste.
Signed-off-by: Stefan Mavrodiev <stefan@olimex.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Add compatible string for A20-OLinuXino-LIME2-eMMC to the
bindings documentation.
Signed-off-by: Stefan Mavrodiev <stefan@olimex.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
round_down() can only round to powers of 2. If round_down() is asked
to round to something that is not a power of 2, incorrect results are
produced. The incorrect results can be both too large and too small.
Instead, use rounddown() which can round to any number.
Fixes: 6a721db180 ("clk: sunxi: Add A31 clocks support")
Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
On my orange pi PC, I got lot of "sun4i-codec 1c22c00.codec: Failed to register our card".
This was due to a missing component: the sun8i analog codec.
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Commit
0a67361dcd ("efi/x86: Remove runtime table address from kexec EFI setup data")
removed the code that retrieves the non-remapped UEFI runtime services
pointer from the data structure provided by kexec, as it was never really
needed on the kexec boot path: mapping the runtime services table at its
non-remapped address is only needed when calling SetVirtualAddressMap(),
which never happens during a kexec boot in the first place.
However, dropping the 'runtime' member from struct efi_setup_data was a
mistake. That struct is shared ABI between the kernel and the kexec tooling
for x86, and so we cannot simply change its layout. So let's put back the
removed field, but call it 'unused' to reflect the fact that we never look
at its contents. While at it, add a comment to remind our future selves
that the layout is external ABI.
Fixes: 0a67361dcd ("efi/x86: Remove runtime table address from kexec EFI setup data")
Reported-by: Theodore Ts'o <tytso@mit.edu>
Tested-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Dave Young <dyoung@redhat.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Commit
d9e3d2c4f1 ("efi/x86: Don't map the entire kernel text RW for mixed mode")
updated the code that creates the 1:1 memory mapping to use read-only
attributes for the 1:1 alias of the kernel's text and rodata sections, to
protect it from inadvertent modification. However, it failed to take into
account that the unused gap between text and rodata is given to the page
allocator for general use.
If the vmap'ed stack happens to be allocated from this region, any by-ref
output arguments passed to EFI runtime services that are allocated on the
stack (such as the 'datasize' argument taken by GetVariable() when invoked
from efivar_entry_size()) will be referenced via a read-only mapping,
resulting in a page fault if the EFI code tries to write to it:
BUG: unable to handle page fault for address: 00000000386aae88
#PF: supervisor write access in kernel mode
#PF: error_code(0x0003) - permissions violation
PGD fd61063 P4D fd61063 PUD fd62063 PMD 386000e1
Oops: 0003 [#1] SMP PTI
CPU: 2 PID: 255 Comm: systemd-sysv-ge Not tainted 5.6.0-rc4-default+ #22
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015
RIP: 0008:0x3eaeed95
Code: ... <89> 03 be 05 00 00 80 a1 74 63 b1 3e 83 c0 48 e8 44 d2 ff ff eb 05
RSP: 0018:000000000fd73fa0 EFLAGS: 00010002
RAX: 0000000000000001 RBX: 00000000386aae88 RCX: 000000003e9f1120
RDX: 0000000000000001 RSI: 0000000000000000 RDI: 0000000000000001
RBP: 000000000fd73fd8 R08: 00000000386aae88 R09: 0000000000000000
R10: 0000000000000002 R11: 0000000000000000 R12: 0000000000000000
R13: ffffc0f040220000 R14: 0000000000000000 R15: 0000000000000000
FS: 00007f21160ac940(0000) GS:ffff9cf23d500000(0000) knlGS:0000000000000000
CS: 0008 DS: 0018 ES: 0018 CR0: 0000000080050033
CR2: 00000000386aae88 CR3: 000000000fd6c004 CR4: 00000000003606e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
Modules linked in:
CR2: 00000000386aae88
---[ end trace a8bfbd202e712834 ]---
Let's fix this by remapping text and rodata individually, and leave the
gaps mapped read-write.
Fixes: d9e3d2c4f1 ("efi/x86: Don't map the entire kernel text RW for mixed mode")
Reported-by: Jiri Slaby <jslaby@suse.cz>
Tested-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20200409130434.6736-10-ardb@kernel.org
efi_thunk_set_variable() treated the NULL "data" pointer as an invalid
parameter, and this broke the deletion of variables in mixed mode.
This commit fixes the check of data so that the userspace program can
delete a variable in mixed mode.
Fixes: 8319e9d5ad ("efi/x86: Handle by-ref arguments covering multiple pages in mixed mode")
Signed-off-by: Gary Lin <glin@suse.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20200408081606.1504-1-glin@suse.com
Link: https://lore.kernel.org/r/20200409130434.6736-9-ardb@kernel.org
Arnd reports that commit
9302c1bb8e ("efi/libstub: Rewrite file I/O routine")
reworks the file I/O routines in a way that triggers the following
warning:
drivers/firmware/efi/libstub/file.c:240:1: warning: the frame size
of 1200 bytes is larger than 1024 bytes [-Wframe-larger-than=]
We can work around this issue dropping an instance of efi_char16_t[256]
from the stack frame, and reusing the 'filename' field of the file info
struct that we use to obtain file information from EFI (which contains
the file name even though we already know it since we used it to open
the file in the first place)
Reported-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20200409130434.6736-8-ardb@kernel.org
The EFI handover protocol was introduced on x86 to permit the boot
loader to pass a populated boot_params structure as an additional
function argument to the entry point. This allows the bootloader to
pass the base and size of a initrd image, which is more flexible
than relying on the EFI stub's file I/O routines, which can only
access the file system from which the kernel image itself was loaded
from firmware.
This approach requires a fair amount of internal knowledge regarding
the layout of the boot_params structure on the part of the boot loader,
as well as knowledge regarding the allowed placement of the initrd in
memory, and so it has been deprecated in favour of a new initrd loading
method that is based on existing UEFI protocols and best practices.
So update the x86 boot protocol documentation to clarify that the EFI
handover protocol has been deprecated, and while at it, add a note that
invoking the EFI handover protocol still requires the PE/COFF image to
be loaded properly (as opposed to simply being copied into memory).
Also, drop the code32_start header field from the list of values that
need to be provided, as this is no longer required.
Reviewed-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20200409130434.6736-7-ardb@kernel.org
Commit
0698fac4ac ("efi/arm: Clean EFI stub exit code from cache instead of avoiding it")
introduced a PC-relative reference to 'call_cache_fn' into
efi_enter_kernel(), which lives way at the end of head.S. In some cases,
the ARM version of the ADR instruction does not have sufficient range,
resulting in a build error:
arch/arm/boot/compressed/head.S:1453: Error: invalid constant (fffffffffffffbe4) after fixup
ARM defines an alternative with a wider range, called ADRL, but this does
not exist for Thumb-2. At the same time, the ADR instruction in Thumb-2
has a wider range, and so it does not suffer from the same issue.
So let's switch to ADRL for ARM builds, and keep the ADR for Thumb-2 builds.
Reported-by: Arnd Bergmann <arnd@arndb.de>
Tested-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20200409130434.6736-6-ardb@kernel.org
Commit
d5cdf4cfea ("efi/x86: Don't relocate the kernel unless necessary")
tries to avoid relocating the kernel in the EFI stub as far as possible.
However, when systemd-boot is used to boot a unified kernel image [1],
the image is constructed by embedding the bzImage as a .linux section in
a PE executable that contains a small stub loader from systemd that will
call the EFI stub handover entry, together with additional sections and
potentially an initrd. When this image is constructed, by for example
dracut, the initrd is placed after the bzImage without ensuring that at
least init_size bytes are available for the bzImage. If the kernel is
not relocated by the EFI stub, this could result in the compressed
kernel's startup code in head_{32,64}.S overwriting the initrd.
To prevent this, unconditionally relocate the kernel if the EFI stub was
entered via the handover entry point.
[1] https://systemd.io/BOOT_LOADER_SPECIFICATION/#type-2-efi-unified-kernel-images
Fixes: d5cdf4cfea ("efi/x86: Don't relocate the kernel unless necessary")
Reported-by: Sergey Shatunov <me@prok.pw>
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20200406180614.429454-2-nivedita@alum.mit.edu
Link: https://lore.kernel.org/r/20200409130434.6736-5-ardb@kernel.org
Commit
3ee372ccce ("x86/boot/compressed/64: Remove .bss/.pgtable from bzImage")
removed the .bss section from the bzImage.
However, while a PE loader is required to zero-initialize the .bss
section before calling the PE entry point, the EFI handover protocol
does not currently document any requirement that .bss be initialized by
the bootloader prior to calling the handover entry.
When systemd-boot is used to boot a unified kernel image [1], the image
is constructed by embedding the bzImage as a .linux section in a PE
executable that contains a small stub loader from systemd together with
additional sections and potentially an initrd. As the .bss section
within the bzImage is no longer explicitly present as part of the file,
it is not initialized before calling the EFI handover entry.
Furthermore, as the size of the embedded .linux section is only the size
of the bzImage file itself, the .bss section's memory may not even have
been allocated.
In particular, this can result in efi_disable_pci_dma being true even
when it was not specified via the command line or configuration option,
which in turn causes crashes while booting on some systems.
To avoid issues, place all EFI stub global variables into the .data
section instead of .bss. As of this writing, only boolean flags for a
few command line arguments and the sys_table pointer were in .bss and
will now move into the .data section.
[1] https://systemd.io/BOOT_LOADER_SPECIFICATION/#type-2-efi-unified-kernel-images
Fixes: 3ee372ccce ("x86/boot/compressed/64: Remove .bss/.pgtable from bzImage")
Reported-by: Sergey Shatunov <me@prok.pw>
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20200406180614.429454-1-nivedita@alum.mit.edu
Link: https://lore.kernel.org/r/20200409130434.6736-4-ardb@kernel.org
The RSC_DRV_IRQ_ENABLE, RSC_DRV_IRQ_STATUS, and RSC_DRV_IRQ_CLEAR
registers are not part of TCS 0. Let's not pretend that they are by
using read_tcs_reg() and write_tcs_reg() and passing a bogus tcs_id of
0. We could introduce a new wrapper for these registers but it
wouldn't buy us much. Let's just read/write directly.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Maulik Shah <mkshah@codeaurora.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Tested-by: Maulik Shah <mkshah@codeaurora.org>
Link: https://lore.kernel.org/r/20200413100321.v4.10.I2adf93809c692d0b673e1a86ea97c45644aa8d97@changeid
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Auditing tcs_invalidate() made me worried. Specifically I saw that it
used spin_lock(), not spin_lock_irqsave(). That always worries me
unless I can trace for sure that I'm in the interrupt handler or that
someone else already disabled interrupts.
Looking more at it, there is actually no reason for these locks
anyway. Specifically the only reason you'd ever call
rpmh_rsc_invalidate() is if you cared that the sleep/wake TCSes were
empty. That means that they need to continue to be empty even after
rpmh_rsc_invalidate() returns. The only way that can happen is if the
caller already has done something to keep all other RPMH users out.
It should be noted that even though the caller is only worried about
making sleep/wake TCSes empty, they also need to worry about stopping
active-only transfers if they need to handle the case where
active-only transfers might borrow the wake TCS.
At the moment rpmh_rsc_invalidate() is only called in PM code from the
last CPU. If that later changes the caller will still need to solve
the above problems themselves, so these locks will never be useful.
Continuing to audit tcs_invalidate(), I found a bug. The function
didn't properly check for a borrowed TCS if we hadn't recently written
anything into the TCS. Specifically, if we've never written to the
WAKE_TCS (or we've flushed it recently) then tcs->slots is empty.
We'll early-out and we'll never call tcs_is_free().
I thought about fixing this bug by either deleting the early check for
bitmap_empty() or possibly only doing it if we knew we weren't on a
TCS that could be borrowed. However, I think it's better to just
delete the checks.
As argued above it's up to the caller to make sure that all other
users of RPMH are quiet before tcs_invalidate() is called. Since
callers need to handle the zero-active-TCS case anyway that means they
need to make sure that the active-only transfers are quiet before
calling too. The one way tcs_invalidate() gets called today is
through rpmh_rsc_cpu_pm_callback() which calls
rpmh_rsc_ctrlr_is_busy() to handle this. When we have another path to
get to tcs_invalidate() it will also need to come up with something
similar and it won't need this extra check either. If we later find
some code path that actually needs this check back in (and somehow
manages to be race free) we can always add it back in.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Maulik Shah <mkshah@codeaurora.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Tested-by: Maulik Shah <mkshah@codeaurora.org>
Link: https://lore.kernel.org/r/20200413100321.v4.9.I07c1f70e0e8f2dc0004bd38970b4e258acdc773e@changeid
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
The calls rpmh_rsc_write_ctrl_data() and rpmh_rsc_send_data() are only
ever called from rpmh.c. We know that rpmh.c already error checked
the message. There's no reason to do it again in rpmh-rsc.
Suggested-by: Maulik Shah <mkshah@codeaurora.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Maulik Shah <mkshah@codeaurora.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Tested-by: Maulik Shah <mkshah@codeaurora.org>
Link: https://lore.kernel.org/r/20200413100321.v4.8.I8e187cdfb7a31f5bb7724f1f937f2862ee464a35@changeid
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
tcs_is_free() had two checks in it: does the software think that the
TCS is free and does the hardware think that the TCS is free. I
couldn't figure out in which case the hardware could think that a TCS
was in-use but software thought it was free. Apparently there is no
case and the extra check can be removed. This apparently has already
been done in a downstream patch.
Suggested-by: Maulik Shah <mkshah@codeaurora.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Maulik Shah <mkshah@codeaurora.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Tested-by: Maulik Shah <mkshah@codeaurora.org>
Link: https://lore.kernel.org/r/20200413100321.v4.7.Icf2213131ea652087f100129359052c83601f8b0@changeid
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
I've been pouring through the rpmh-rsc code and trying to understand
it. Document everything to the best of my ability. All documentation
here is strictly from code analysis--no actual knowledge of the
hardware was used. If something is wrong in here I either
misunderstood the code, had a typo, or the code has a bug in it
leading to my incorrect understanding.
In a few places here I have documented things that don't make tons of
sense. A future patch will try to address this. While this means I'm
adding comments / todos and then later fixing them in the series, it
seemed more urgent to get things documented first so that people could
understand the later patches.
Any comments I adjusted I also tried to make match kernel-doc better.
Specifically:
- kernel-doc says do not leave a blank line between the function
description and the arguments
- kernel-doc examples always have things starting w/ a capital and
ending with a period.
This should be a no-op. It's just comment changes.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Maulik Shah <mkshah@codeaurora.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20200413100321.v4.6.I52653eb85d7dc8981ee0dafcd0b6cc0f273e9425@changeid
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
The "cmd_cache" in RPMH wasn't terribly sensible. Specifically:
- The current code doesn't really detect "conflicts" properly any case
where the sequence being checked has more than one entry. One
simple way to see this in the current code is that if cmd[0].addr
isn't found then cmd[1].addr is never checked.
- The code attempted to use the "cmd_cache" to update an existing
message in a sleep/wake TCS with new data. The goal appeared to be
to update part of a TCS while leaving the rest of the TCS alone. We
never actually do this. We always fully invalidate and re-write
everything.
- If/when we try to optimize things to not fully invalidate / re-write
every time we update the TCSes we'll need to think it through very
carefully. Specifically requirement of find_match() that the new
sequence of addrs must match exactly the old sequence of addrs seems
inflexible. It's also not documented in rpmh_write() and
rpmh_write_batch(). In any case, if we do decide to require updates
to keep the exact same sequence and length then presumably the API
and data structures should be updated to understand groups more
properly. The current algorithm doesn't really keep track of the
length of the old sequence and there are several boundary-condition
bugs because of that. Said another way: if we decide to do
something like this in the future we should start from scratch and
thus find_match() isn't useful to keep around.
This patch isn't quite a no-op. Specifically:
- It should be a slight performance boost of not searching through so
many arrays.
- The old code would have done something useful in one case: it would
allow someone calling rpmh_write() to override the data that came
from rpmh_write_batch(). I don't believe that actually happens in
reality.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Maulik Shah <mkshah@codeaurora.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Tested-by: Maulik Shah <mkshah@codeaurora.org>
Link: https://lore.kernel.org/r/20200413100321.v4.5.I6d3d0a3ec810dc72ff1df3cbf97deefdcdeb8eef@changeid
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
The get_tcs_of_type() function doesn't provide any value. It's not
conceptually difficult to access a value in an array, even if that
value is in a structure and we want a pointer to the value. Having
the function in there makes me feel like it's doing something fancier
like looping or searching. Remove it.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Maulik Shah <mkshah@codeaurora.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Tested-by: Maulik Shah <mkshah@codeaurora.org>
Link: https://lore.kernel.org/r/20200413100321.v4.4.Ia348ade7c6ed1d0d952ff2245bc854e5834c8d9a@changeid
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
I was trying to write documentation for the functions in rpmh-rsc and
I got to tcs_ctrl_write(). The documentation for the function would
have been: "This is the core of rpmh_rsc_write_ctrl_data(); all the
caller does is error-check and then call this".
Having the error checks in a separate function doesn't help for
anything since:
- There are no other callers that need to bypass the error checks.
- It's less documenting. When I read tcs_ctrl_write() I kept
wondering if I need to handle cases other than ACTIVE_ONLY or cases
with more commands than could fit in a TCS. This is obvious when
the error checks and code are together.
- The function just isn't that long, so there's no problem
understanding the combined function.
Things were even more confusing because the two functions names didn't
make obvious (at least to me) their relationship.
Simplify by folding one function into the other.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Maulik Shah <mkshah@codeaurora.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Tested-by: Maulik Shah <mkshah@codeaurora.org>
Link: https://lore.kernel.org/r/20200413100321.v4.3.Ie88ce5ccfc0c6055903ccca5286ae28ed3b85ed3@changeid
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Perhaps it's just me, it took a really long time to understand what
the register layout of rpmh-rsc was just from the #defines. Let's add
a bunch of comments describing which blocks are part of other blocks.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Maulik Shah <mkshah@codeaurora.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20200413100321.v4.2.Iaddc29b72772e6ea381238a0ee85b82d3903e5f2@changeid
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
This patch makes two changes, both of which should be no-ops:
1. Make read_tcs_reg() / read_tcs_cmd() symmetric to write_tcs_reg() /
write_tcs_cmd().
2. Change the order of operations in the above functions to make it
more obvious to me what the math is doing. Specifically first you
want to find the right TCS, then the right register, and then
multiply by the command ID if necessary.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Maulik Shah <mkshah@codeaurora.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Tested-by: Maulik Shah <mkshah@codeaurora.org>
Link: https://lore.kernel.org/r/20200413100321.v4.1.I1b754137e8089e46cf33fc2ea270734ec3847ec4@changeid
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
This patch re-arranges ipq8074 device nodes based on node address
followed by node names followed by node labels.
Suggested-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Sivaprakash Murugesan <sivaprak@codeaurora.org>
Link: https://lore.kernel.org/r/1586572830-22727-1-git-send-email-sivaprak@codeaurora.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Changed polling-delay and polling-delay-passive to zero to disable
polling mode of the framework as interrupts for tsens are already
configured.
Signed-off-by: Rajeshwari <rkambl@codeaurora.org>
Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/1586244677-14399-1-git-send-email-rkambl@codeaurora.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
The thermal trip points have unit name but no reg property, so we can
remove them. It also fixes the following warnings from 'make dtbs_check'
after adding the thermal yaml bindings.
arch/arm64/boot/dts/qcom/msm8998-hp-envy-x2.dt.yaml: thermal-zones:
cpu0-thermal:trips: 'trip-point@0' does not match any of the regexes:
'^[a-zA-Z][a-zA-Z0-9\\-_]{0,63}$', 'pinctrl-[0-9]+'
arch/arm64/boot/dts/qcom/msm8998-hp-envy-x2.dt.yaml: thermal-zones:
cpu1-thermal:trips: 'trip-point@0' does not match any of the regexes:
'^[a-zA-Z][a-zA-Z0-9\\-_]{0,63}$', 'pinctrl-[0-9]+'
arch/arm64/boot/dts/qcom/msm8998-hp-envy-x2.dt.yaml: thermal-zones:
cpu2-thermal:trips: 'trip-point@0' does not match any of the regexes:
'^[a-zA-Z][a-zA-Z0-9\\-_]{0,63}$', 'pinctrl-[0-9]+'
arch/arm64/boot/dts/qcom/msm8998-hp-envy-x2.dt.yaml: thermal-zones:
cpu3-thermal:trips: 'trip-point@0' does not match any of the regexes:
'^[a-zA-Z][a-zA-Z0-9\\-_]{0,63}$', 'pinctrl-[0-9]+'
arch/arm64/boot/dts/qcom/msm8998-hp-envy-x2.dt.yaml: thermal-zones:
cpu4-thermal:trips: 'trip-point@0' does not match any of the regexes:
'^[a-zA-Z][a-zA-Z0-9\\-_]{0,63}$', 'pinctrl-[0-9]+'
arch/arm64/boot/dts/qcom/msm8998-hp-envy-x2.dt.yaml: thermal-zones:
cpu5-thermal:trips: 'trip-point@0' does not match any of the regexes:
'^[a-zA-Z][a-zA-Z0-9\\-_]{0,63}$', 'pinctrl-[0-9]+'
arch/arm64/boot/dts/qcom/msm8998-hp-envy-x2.dt.yaml: thermal-zones:
cpu6-thermal:trips: 'trip-point@0' does not match any of the regexes:
'^[a-zA-Z][a-zA-Z0-9\\-_]{0,63}$', 'pinctrl-[0-9]+'
arch/arm64/boot/dts/qcom/msm8998-hp-envy-x2.dt.yaml: thermal-zones:
cpu7-thermal:trips: 'trip-point@0' does not match any of the regexes:
'^[a-zA-Z][a-zA-Z0-9\\-_]{0,63}$', 'pinctrl-[0-9]+'
arch/arm64/boot/dts/qcom/msm8998-hp-envy-x2.dt.yaml: thermal-zones:
clust0-mhm-thermal:trips: 'trip-point@0' does not match any of the
regexes: '^[a-zA-Z][a-zA-Z0-9\\-_]{0,63}$', 'pinctrl-[0-9]+'
arch/arm64/boot/dts/qcom/msm8998-hp-envy-x2.dt.yaml: thermal-zones:
clust1-mhm-thermal:trips: 'trip-point@0' does not match any of the
regexes: '^[a-zA-Z][a-zA-Z0-9\\-_]{0,63}$', 'pinctrl-[0-9]+'
arch/arm64/boot/dts/qcom/msm8998-hp-envy-x2.dt.yaml: thermal-zones:
cluster1-l2-thermal:trips: 'trip-point@0' does not match any of the
regexes: '^[a-zA-Z][a-zA-Z0-9\\-_]{0,63}$', 'pinctrl-[0-9]+'
arch/arm64/boot/dts/qcom/msm8998-hp-envy-x2.dt.yaml: thermal-zones:
modem-thermal:trips: 'trip-point@0' does not match any of the regexes:
'^[a-zA-Z][a-zA-Z0-9\\-_]{0,63}$', 'pinctrl-[0-9]+'
arch/arm64/boot/dts/qcom/msm8998-hp-envy-x2.dt.yaml: thermal-zones:
mem-thermal:trips: 'trip-point@0' does not match any of the regexes:
'^[a-zA-Z][a-zA-Z0-9\\-_]{0,63}$', 'pinctrl-[0-9]+'
arch/arm64/boot/dts/qcom/msm8998-hp-envy-x2.dt.yaml: thermal-zones:
wlan-thermal:trips: 'trip-point@0' does not match any of the regexes:
'^[a-zA-Z][a-zA-Z0-9\\-_]{0,63}$', 'pinctrl-[0-9]+'
arch/arm64/boot/dts/qcom/msm8998-hp-envy-x2.dt.yaml: thermal-zones:
q6-dsp-thermal:trips: 'trip-point@0' does not match any of the regexes:
'^[a-zA-Z][a-zA-Z0-9\\-_]{0,63}$', 'pinctrl-[0-9]+'
arch/arm64/boot/dts/qcom/msm8998-hp-envy-x2.dt.yaml: thermal-zones:
camera-thermal:trips: 'trip-point@0' does not match any of the regexes:
'^[a-zA-Z][a-zA-Z0-9\\-_]{0,63}$', 'pinctrl-[0-9]+'
arch/arm64/boot/dts/qcom/msm8998-hp-envy-x2.dt.yaml: thermal-zones:
multimedia-thermal:trips: 'trip-point@0' does not match any of the
regexes: '^[a-zA-Z][a-zA-Z0-9\\-_]{0,63}$', 'pinctrl-[0-9]+'
arch/arm64/boot/dts/qcom/msm8998-mtp.dt.yaml: thermal-zones:
cpu0-thermal:trips: 'trip-point@0' does not match any of the regexes:
'^[a-zA-Z][a-zA-Z0-9\\-_]{0,63}$', 'pinctrl-[0-9]+'
arch/arm64/boot/dts/qcom/msm8998-mtp.dt.yaml: thermal-zones:
cpu1-thermal:trips: 'trip-point@0' does not match any of the regexes:
'^[a-zA-Z][a-zA-Z0-9\\-_]{0,63}$', 'pinctrl-[0-9]+'
arch/arm64/boot/dts/qcom/msm8998-mtp.dt.yaml: thermal-zones:
cpu2-thermal:trips: 'trip-point@0' does not match any of the regexes:
'^[a-zA-Z][a-zA-Z0-9\\-_]{0,63}$', 'pinctrl-[0-9]+'
arch/arm64/boot/dts/qcom/msm8998-mtp.dt.yaml: thermal-zones:
cpu3-thermal:trips: 'trip-point@0' does not match any of the regexes:
'^[a-zA-Z][a-zA-Z0-9\\-_]{0,63}$', 'pinctrl-[0-9]+'
arch/arm64/boot/dts/qcom/msm8998-mtp.dt.yaml: thermal-zones:
cpu4-thermal:trips: 'trip-point@0' does not match any of the regexes:
'^[a-zA-Z][a-zA-Z0-9\\-_]{0,63}$', 'pinctrl-[0-9]+'
arch/arm64/boot/dts/qcom/msm8998-mtp.dt.yaml: thermal-zones:
cpu5-thermal:trips: 'trip-point@0' does not match any of the regexes:
'^[a-zA-Z][a-zA-Z0-9\\-_]{0,63}$', 'pinctrl-[0-9]+'
arch/arm64/boot/dts/qcom/msm8998-mtp.dt.yaml: thermal-zones:
cpu6-thermal:trips: 'trip-point@0' does not match any of the regexes:
'^[a-zA-Z][a-zA-Z0-9\\-_]{0,63}$', 'pinctrl-[0-9]+'
arch/arm64/boot/dts/qcom/msm8998-mtp.dt.yaml: thermal-zones:
cpu7-thermal:trips: 'trip-point@0' does not match any of the regexes:
'^[a-zA-Z][a-zA-Z0-9\\-_]{0,63}$', 'pinctrl-[0-9]+'
arch/arm64/boot/dts/qcom/msm8998-mtp.dt.yaml: thermal-zones:
clust0-mhm-thermal:trips: 'trip-point@0' does not match any of the
regexes: '^[a-zA-Z][a-zA-Z0-9\\-_]{0,63}$', 'pinctrl-[0-9]+'
arch/arm64/boot/dts/qcom/msm8998-mtp.dt.yaml: thermal-zones:
clust1-mhm-thermal:trips: 'trip-point@0' does not match any of the
regexes: '^[a-zA-Z][a-zA-Z0-9\\-_]{0,63}$', 'pinctrl-[0-9]+'
arch/arm64/boot/dts/qcom/msm8998-mtp.dt.yaml: thermal-zones:
cluster1-l2-thermal:trips: 'trip-point@0' does not match any of the
regexes: '^[a-zA-Z][a-zA-Z0-9\\-_]{0,63}$', 'pinctrl-[0-9]+'
arch/arm64/boot/dts/qcom/msm8998-mtp.dt.yaml: thermal-zones:
modem-thermal:trips: 'trip-point@0' does not match any of the regexes:
'^[a-zA-Z][a-zA-Z0-9\\-_]{0,63}$', 'pinctrl-[0-9]+'
arch/arm64/boot/dts/qcom/msm8998-mtp.dt.yaml: thermal-zones:
mem-thermal:trips: 'trip-point@0' does not match any of the regexes:
'^[a-zA-Z][a-zA-Z0-9\\-_]{0,63}$', 'pinctrl-[0-9]+'
arch/arm64/boot/dts/qcom/msm8998-mtp.dt.yaml: thermal-zones:
wlan-thermal:trips: 'trip-point@0' does not match any of the regexes:
'^[a-zA-Z][a-zA-Z0-9\\-_]{0,63}$', 'pinctrl-[0-9]+'
arch/arm64/boot/dts/qcom/msm8998-mtp.dt.yaml: thermal-zones:
q6-dsp-thermal:trips: 'trip-point@0' does not match any of the regexes:
'^[a-zA-Z][a-zA-Z0-9\\-_]{0,63}$', 'pinctrl-[0-9]+'
arch/arm64/boot/dts/qcom/msm8998-mtp.dt.yaml: thermal-zones:
camera-thermal:trips: 'trip-point@0' does not match any of the regexes:
'^[a-zA-Z][a-zA-Z0-9\\-_]{0,63}$', 'pinctrl-[0-9]+'
arch/arm64/boot/dts/qcom/msm8998-mtp.dt.yaml: thermal-zones:
multimedia-thermal:trips: 'trip-point@0' does not match any of the
regexes: '^[a-zA-Z][a-zA-Z0-9\\-_]{0,63}$', 'pinctrl-[0-9]+'
Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
Link: https://lore.kernel.org/r/cd6f0c7298437d35642b35c9ede9064c247d6090.1585562459.git.amit.kucheria@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
