There has been a number of reports that using SG/TSO on different chip
versions results in tx timeouts. However for a lot of people SG/TSO
works fine. Therefore disable both features by default, but allow users
to enable them. Use at own risk!
Fixes: 93681cd7d9 ("r8169: enable HW csum and TSO")
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We were registering our slave MDIO bus with OF and doing so with
assigning the newly created slave_mii_bus of_node to the master MDIO bus
controller node. This is a bad thing to do for a number of reasons:
- we are completely lying about the slave MII bus is arranged and yet we
still want to control which MDIO devices it probes. It was attempted
before to play tricks with the bus_mask to perform that:
https://www.spinics.net/lists/netdev/msg429420.html but the approach
was rightfully rejected
- the device_node reference counting is messed up and we are effectively
doing a double probe on the devices we already probed using the
master, this messes up all resources reference counts (such as clocks)
The proper fix for this as indicated by David in his reply to the
thread above is to use a platform data style registration so as to
control exactly which devices we probe:
https://www.spinics.net/lists/netdev/msg430083.html
By using mdiobus_register(), our slave_mii_bus->phy_mask value is used
as intended, and all the PHY addresses that must be redirected towards
our slave MDIO bus is happening while other addresses get redirected
towards the master MDIO bus.
Fixes: 461cd1b03e ("net: dsa: bcm_sf2: Register our slave MDIO bus")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Vivien Didelot <vivien.didelot@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch fix the loop iteration by not walking over the last
iteration. The cmpri compressing value exempt the last segment. As the
code shows the last iteration will be overwritten by cmpre value
handling which is for the last segment.
I think this doesn't end in any bufferoverflows because we work on worst
case temporary buffer sizes but it ends in not best compression settings
in some cases.
Fixes: 8610c7c6e3 ("net: ipv6: add support for rpl sr exthdr")
Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When an XDP program is installed, tun_build_skb() grabs a reference to
the current page fragment page if the program returns XDP_REDIRECT or
XDP_TX. However, since tun_xdp_act() passes through negative return
values from the XDP program, it is possible to trigger the error path by
mistake and accidentally drop a reference to the fragments page without
taking one, leading to a spurious free. This is believed to be the cause
of some KASAN use-after-free reports from syzbot [1], although without a
reproducer it is not possible to confirm whether this patch fixes the
problem.
Ensure that we only drop a reference to the fragments page if the XDP
transmit or redirect operations actually fail.
[1] https://syzkaller.appspot.com/bug?id=e76a6af1be4acd727ff6bbca669833f98cbf5d95
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
CC: Eric Dumazet <edumazet@google.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Fixes: 8ae1aff0b3 ("tuntap: split out XDP logic")
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
- Add kproobes/uprobes support
- Add lockdep, rseq, gcov support
- Fixup init_fpu
- Fixup ftrace_modify deadlock
- Fixup speculative execution on IO area
-----BEGIN PGP SIGNATURE-----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=yrFg
-----END PGP SIGNATURE-----
Merge tag 'csky-for-linus-5.7-rc1' of git://github.com/c-sky/csky-linux
Pull csky updates from Guo Ren:
- Add kproobes/uprobes support
- Add lockdep, rseq, gcov support
- Fixup init_fpu
- Fixup ftrace_modify deadlock
- Fixup speculative execution on IO area
* tag 'csky-for-linus-5.7-rc1' of git://github.com/c-sky/csky-linux:
csky: Fixup cpu speculative execution to IO area
csky: Add uprobes support
csky: Add kprobes supported
csky: Enable LOCKDEP_SUPPORT
csky: Enable the gcov function
csky: Fixup get wrong psr value from phyical reg
csky/ftrace: Fixup ftrace_modify_code deadlock without CPU_HAS_ICACHE_INS
csky: Implement ftrace with regs
csky: Add support for restartable sequence
csky: Implement ptrace regs and stack API
csky: Fixup init_fpu compile warning with __init
The Medion E1239T uses the default jack-detect mode 3, but instead of
using an analog microphone it is using a DMIC on dmic-data-pin 1,
like other models following Intel's Brasswell's reference design.
This commit adds a DMI quirk pointing to the intel_braswell_platform_data
for this model.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200402185257.3355-1-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Enable radar detection in secondary segment for VHT160 and VHT80+80 mode
on DFS channels. Otherwise, when injecting radar pulse in the secondary
segment, the DUT can't detect radar pulse.
Tested: qca9984 with firmware ver 10.4-3.10-00047
Signed-off-by: Lei Wang <leiwa@codeaurora.org>
Signed-off-by: Sowmiya Sree Elavalagan <ssreeela@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/1585574792-719-2-git-send-email-ssreeela@codeaurora.org
Set right channel frequencies in VHT160 mode according to the VHT160
interoperability workaround added as part of IEEE Std 802.11™-2016 in
"Table 9-252—VHT Operation Information subfields", band_center_freq2
corresponds to CCFS1 in Table 9-253. Previous implementation
(band_center_freq2 = 0 for VHT160) is only deprecated.
Enable VHT80+80 mode and set the proper peer RX nss value for VHT160 and
VHT80+80 mode.
Based on patches by Sebastian Gottschall:
https://lkml.kernel.org/r/20180704095444.662-1-s.gottschall@dd-wrt.comhttps://lkml.kernel.org/r/20180704120519.6479-1-s.gottschall@dd-wrt.com
Tested: qca9984 with firmware ver 10.4-3.10-00047
Co-developed-by: Sebastian Gottschall <s.gottschall@dd-wrt.com>
Signed-off-by: Sebastian Gottschall <s.gottschall@dd-wrt.com>
Co-developed-by: Rick Wu <rwu@codeaurora.org>
Signed-off-by: Rick Wu <rwu@codeaurora.org>
Signed-off-by: Lei Wang <leiwa@codeaurora.org>
Signed-off-by: Sowmiya Sree Elavalagan <ssreeela@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/1585574792-719-1-git-send-email-ssreeela@codeaurora.org
The mgmt tx count reference is incremented/decremented on every mgmt tx and on
tx completion event from firmware.
In case of an unexpected mgmt tx completion event from firmware,
the counter would underflow. Avoid this by decrementing
only when the tx count is greater than 0.
Signed-off-by: Sriram R <srirrama@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/1585567028-9242-1-git-send-email-srirrama@codeaurora.org
Increase the tx completion ring size to 0x8000.Also set the
idr size to be same as the completion ring size.
This avoids backpressure on the TX Completion and
corresponding TCL Data ring during high data traffic.
Signed-off-by: Sriram R <srirrama@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/1585567006-9173-1-git-send-email-srirrama@codeaurora.org
Currently the error message refers to the command WMI_TWT_DIeABLE_CMDID
which looks like a cut-n-paste mangled typo. Fix the message to match
the command WMI_BSS_COLOR_CHANGE_ENABLE_CMDID that failed.
Fixes: 5a032c8d19 ("ath11k: add WMI calls required for handling BSS color")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200327192639.363354-1-colin.king@canonical.com
Pktlog data are different among the chipset & chipset versions.
As part of enhancing the user space script to decode the pktlog
trace events generated, it is desirable to know which chipset or
which chipset version has provided the events and thereby decode
the pktlogs appropriately.
Pktlog checksum helps to determine the chipset variant which is
given by the firmware in the struct wmi_ready_event.
Pktlog checksums are computed during the firmware build.
So, adding that pktlog checksum in the pklog trace events.
Signed-off-by: Maharaja Kennadyrajan <mkenna@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/1585234155-30574-1-git-send-email-mkenna@codeaurora.org
There is a race condition, when the user writes 'hw-restart' and
'hard' in the simulate_fw_crash debugfs file without any delay.
In the above scenario, the firmware dump work queue(scheduled by
'hard') should be handled gracefully, while the target is in the
'hw-restart'.
Tested HW: QCA9984
Tested FW: 10.4-3.9.0.2-00044
Co-developed-by: Govindaraj Saminathan <gsamin@codeaurora.org>
Signed-off-by: Govindaraj Saminathan <gsamin@codeaurora.org>
Signed-off-by: Maharaja Kennadyrajan <mkenna@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/1585213077-28439-1-git-send-email-mkenna@codeaurora.org
Add support to test aggregation procedures (addba/addba_resp/delba)
manually by adding the required callbacks in sta debugfs files.
To enable automatic aggregation in target,
echo 0 > /sys/kernel/debug/ieee80211/phyX/netdev:wlanX/
stations/XX:XX:XX:XX:XX:XX/aggr_mode
For manual mode,
echo 1 > /sys/kernel/debug/ieee80211/phyX/netdev:wlanX/
stations/XX:XX:XX:XX:XX:XX/aggr_mode
To send addba response,
echo 0 25 > /sys/kernel/debug/ieee80211/phyX/netdev:wlanX/
stations/XX:XX:XX:XX:XX:XX/addba_resp
To send addba,
echo 1 32 > /sys/kernel/debug/ieee80211/phyX/netdev:wlanX/
stations/XX:XX:XX:XX:XX:XX/addba
To send delba,
echo 0 1 37 > /sys/kernel/debug/ieee80211/phyX/netdev:wlanX/
stations/XX:XX:XX:XX:XX:XX/delba
Signed-off-by: Maharaja Kennadyrajan <mkenna@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/1585213026-28406-1-git-send-email-mkenna@codeaurora.org
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEq1nRK9aeMoq1VSgcnJ2qBz9kQNkFAl6LFJ0ACgkQnJ2qBz9k
QNkSUQgAzwaescnHeVTF7/Zg9Uj2xrfrTJZ1E+Mn9qnd/0/z/asVV+RKfY7Gnu7h
g19inDI4ZESFz2gWz4jwJD1c2/yMZb8vnae4ye3dtCv2yjG/0JxCeue6vjwsWqmO
4jbSgk8YNQqzwEFVMzNp43ZJr3CFooLCIsJcL8q4yYk8Kt4pDUPmQ1vBvAc6k9vK
BKMBvp926tbomP27nq0n0CjvHy7ipDGMl4H6i4vBxHRfbDPih2x9VEklK3JatC1n
4AKS6IYJrkZVdOjli+DrResbcWxyT4db5tPio5MU0RDnVhNZT2cHyNVXf5EpRJqP
72pa7gfPu1Rx1+tU8bDR/daSveou2A==
=fkCV
-----END PGP SIGNATURE-----
Merge tag 'fsnotify_for_v5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs
Pull fsnotify updates from Jan Kara:
"This implements the fanotify FAN_DIR_MODIFY event.
This event reports the name in a directory under which a change
happened and together with the directory filehandle and fstatat()
allows reliable and efficient implementation of directory
synchronization"
* tag 'fsnotify_for_v5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
fanotify: Fix the checks in fanotify_fsid_equal
fanotify: report name info for FAN_DIR_MODIFY event
fanotify: record name info for FAN_DIR_MODIFY event
fanotify: Drop fanotify_event_has_fid()
fanotify: prepare to report both parent and child fid's
fanotify: send FAN_DIR_MODIFY event flavor with dir inode and name
fanotify: divorce fanotify_path_event and fanotify_fid_event
fanotify: Store fanotify handles differently
fanotify: Simplify create_fd()
fanotify: fix merging marks masks with FAN_ONDIR
fanotify: merge duplicate events on parent and child
fsnotify: replace inode pointer with an object id
fsnotify: simplify arguments passing to fsnotify_parent()
fsnotify: use helpers to access data by data_type
fsnotify: funnel all dirent events through fsnotify_name()
fsnotify: factor helpers fsnotify_dentry() and fsnotify_file()
fsnotify: tidy up FS_ and FAN_ constants
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEq1nRK9aeMoq1VSgcnJ2qBz9kQNkFAl6LE+QACgkQnJ2qBz9k
QNn0HAf/fz+W/WqZFMEMLoAOJB5ALQa4v1DQGqsSIyKb9GIF8OBhzqNCP2wryx/r
Qa37jTOLEQxsdMIQ3LaDH8RVZOj6GUAhk5RZIgTX2XYcWRdqqhws0a27BAJSPnt9
+uujPccf7rBQJ1aN8+kt8QMDkxo4AX8keHtfT4nbl2c1JNsd2nbjsEsWUBx7R1kb
aoblIklUMfMr5NvKcWakhJoMtST0fyNX4vbV3tePJTTOS1uzatQLJ5ox2WmY6M+q
tTEaKpR/zHMGXegVAlBMFBTJ3NVANcS4MoIYcHlkg5DMOO00XwHH/ZtsJlVsAOuj
FURu2KJ3d4RYMxaKlX+wBscliL2GqQ==
=weEs
-----END PGP SIGNATURE-----
Merge tag 'for_v5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs
Pull ext2/udf updates from Jan Kara:
"Cleanups and fixes for ext2 and one cleanup for udf"
* tag 'for_v5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
ext2: fix empty body warnings when -Wextra is used
ext2: fix debug reference to ext2_xattr_cache
udf: udf_sb.h: Replace zero-length array with flexible-array member
ext2: xattr.h: Replace zero-length array with flexible-array member
ext2: Silence lockdep warning about reclaim under xattr_sem
- Fix read with O_NONBLOCK to allow incomplete read and return immediately
- Rest is just cleanup (indent, unused field in struct, extra semicolon)
-----BEGIN PGP SIGNATURE-----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=wAe5
-----END PGP SIGNATURE-----
Merge tag '9p-for-5.7' of git://github.com/martinetd/linux
Pull 9p updates from Dominique Martinet:
"Not much new, but a few patches for this cycle:
- Fix read with O_NONBLOCK to allow incomplete read and return
immediately
- Rest is just cleanup (indent, unused field in struct, extra
semicolon)"
* tag '9p-for-5.7' of git://github.com/martinetd/linux:
net/9p: remove unused p9_req_t aux field
9p: read only once on O_NONBLOCK
9pnet: allow making incomplete read requests
9p: Remove unneeded semicolon
9p: Fix Kconfig indentation
Reflink should force the log out to disk if the filesystem was mounted
with wsync, the same as most other operations in xfs.
[Note: XFS_MOUNT_WSYNC is set when the admin mounts the filesystem
with either the 'wsync' or 'sync' mount options, which effectively means
that we're classifying reflink/dedupe as IO operations and making them
synchronous when required.]
Fixes: 3fc9f5e409 ("xfs: remove xfs_reflink_remap_range")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
[darrick: add more to the changelog]
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Create a new helper to force the log up to the last LSN touching an
inode.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
The fast path check in acpi_ec_add() is not incorrect, because in
fact acpi_device_hid(device) can be equal to ACPI_ECDT_HID only if
boot_ec is not NULL, but it may confuse static checkers, so change
it to explicitly check boot_ec upfront and use the slow path if
that pointer is NULL.
Link: https://lore.kernel.org/linux-acpi/20200406144217.GA68494@mwanda/
Fixes: 3d9b8dd832 ("ACPI: EC: Use fast path in acpi_ec_add() for DSDT boot EC")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Pull vfs pathwalk fix from Al Viro:
"Dumb braino in legitimize_path()..."
* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
fix a braino in legitimize_path()
__i915_gem_object_flush_map() takes a byte range, so feed it the written
bytes and do not mistake the u32 index as bytes!
Fixes: a679f58d05 ("drm/i915: Flush pages on acquisition")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.william.auld@gmail.com>
Cc: <stable@vger.kernel.org> # v5.2+
Reviewed-by: Matthew Auld <matthew.william.auld@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200406114821.10949-1-chris@chris-wilson.co.uk
On TypeC ports if a sink deasserts/reasserts its HPD signal, generating
a hotplug interrupt without the sink getting unplugged/replugged from
the connector, there can be an up to 3 seconds delay until the AUX
channel gets functional. To avoid detection failures this delay causes
retry the detection for 5 seconds.
I noticed this on ICL/TGL RVPs and a DELL XPS 13 7390 ICL laptop.
References: https://gitlab.freedesktop.org/drm/intel/issues/1067
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200330095425.29113-2-imre.deak@intel.com
On TypeC connectors we need to retry the detection after hotplug events
for a longer time, so add a retry counter to support this. The next
patch will add detection retries on TypeC ports needing this.
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200330095425.29113-1-imre.deak@intel.com
brown paperbag time... wrong order of arguments ended up confusing
the values to check dentry and mount_lock seqcounts against.
Reported-by: kernel test robot <rong.a.chen@intel.com>
Fixes: 2aa3847085 ("non-RCU analogue of the previous commit")
Tested-by: kernel test robot <rong.a.chen@intel.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
* acpica:
ACPICA: Update version 20200326
ACPICA: Fixes for acpiExec namespace init file
ACPICA: Add NHLT table signature
ACPICA: WSMT: Fix typo, no functional change
ACPICA: utilities: fix sprintf()
ACPICA: acpiexec: remove redeclaration of acpi_gbl_db_opt_no_region_support
ACPICA: Change PlatformCommChannel ASL keyword to PCC
ACPICA: Fix IVRS IVHD type 10h reserved field name
ACPICA: Implement IVRS IVHD type 11h parsing
ACPICA: Fix a typo in a comment field
drivers/net/wireless/ath/ath11k/thermal.h:45:1:
warning: no return statement in function returning non-void [-Wreturn-type]
drivers/net/wireless/ath/ath11k/core.c:416:28: error:
passing argument 1 of 'ath11k_thermal_unregister' from incompatible pointer type [-Werror=incompatible-pointer-types]
Add missing return 0 in ath11k_thermal_set_throttling,
and fix ath11k_thermal_unregister param type.
Fixes: 2a63bbca06 ("ath11k: add thermal cooling device support")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200403083414.31392-1-yuehaibing@huawei.com
The MPMAN MPWIN895CL tablet almost fully works with out default settings.
The only problem is that it has only 1 speaker so any sounds only playing
on the right channel get lost.
Add a quirk for this model using the default settings + MONO_SPEAKER.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200405133726.24154-1-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The commit 0d6defc7e0 ("ASoC: stm32: sai: manage rebind issue")
converts some function calls to their non-devm equivalents. The
appropriate cleanup code was added to the remove function, but not
to the probe function. Add a call to snd_dmaengine_pcm_unregister
to compensate for the call to snd_dmaengine_pcm_register in case
of subsequent failure.
Fixes: commit 0d6defc7e0 ("ASoC: stm32: sai: manage rebind issue")
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
Acked-by: Olivier Moysan <olivier.moysan@st.com>
Link: https://lore.kernel.org/r/1586099028-5104-1-git-send-email-Julia.Lawall@inria.fr
Signed-off-by: Mark Brown <broonie@kernel.org>
* pm-sleep:
Documentation: PM: sleep: Document system-wide suspend code flows
PM: sleep: Add pm_debug_messages kernel command line option
PM: sleep: core: Drop racy and redundant checks from device_prepare()
PM: hibernate: Propagate the return value of hibernation_restore()
* pm-cpufreq:
cpufreq: Select schedutil when using big.LITTLE
cpufreq: intel_pstate: Select schedutil as the default governor
After commit f651c8b055 ("drm/virtio: factor out the sg_table from
virtio_gpu_object"), virtio_gpu_create_object allocates too small space
to fit everything in. It is because it allocates struct
virtio_gpu_object, but should allocate a newly added struct
virtio_gpu_object_shmem which has 2 more members.
So fix that by using correct type in virtio_gpu_create_object.
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Link: http://patchwork.freedesktop.org/patch/msgid/20200319100421.16267-1-jslaby@suse.cz
Fixes: f651c8b055 ("drm/virtio: factor out the sg_table from virtio_gpu_object")
Cc: Gurchetan Singh <gurchetansingh@chromium.org>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
(cherry picked from commit 0666a8d7f6)
ip_set_type_list is traversed using list_for_each_entry_rcu
outside an RCU read-side critical section but under the protection
of ip_set_type_mutex.
Hence, add corresponding lockdep expression to silence false-positive
warnings, and harden RCU lists.
Signed-off-by: Amol Grover <frextrite@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
The common I/O layer delays the ADD uevent for subchannels and
delegates generating this uevent to the individual subchannel
drivers. The vfio-ccw I/O subchannel driver, however, did not
do that, and will not generate an ADD uevent for subchannels
that had not been bound to a different driver (or none at all,
which also triggers the uevent).
Generate the ADD uevent at the end of the probe function if
uevents were still suppressed for the device.
Message-Id: <20200327124503.9794-3-cohuck@redhat.com>
Fixes: 63f1934d56 ("vfio: ccw: basic implementation for vfio_ccw driver")
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
The common I/O layer delays the ADD uevent for subchannels and
delegates generating this uevent to the individual subchannel
drivers. The io_subchannel driver will do so when the associated
ccw_device has been registered -- but unconditionally, so more
ADD uevents will be generated if a subchannel has been unbound
from the io_subchannel driver and later rebound.
To fix this, only generate the ADD event if uevents were still
suppressed for the device.
Fixes: fa1a8c23eb ("s390: cio: Delay uevents for subchannels")
Message-Id: <20200327124503.9794-2-cohuck@redhat.com>
Reported-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Polling drivers in a configuration with 1 Input Queue currently keep
their DSCI armed all the way through the poll cycle, until
qdio_start_irq() clears it.
_Any_ intermittent QDIO interrupt delivered to tiqdio_thinint_handler()
will thus cause
1) the 'adapter_int' statistic to be incremented,
2) a call to tiqdio_call_inq_handlers() for this device, and then
3) the 'int_discarded' statistics to be incremented.
This causes overhead & complexity in the IRQ path, along with ambiguity
in the statistics.
On the other hand the device should be in IRQ avoidance mode during a
poll cycle, so there won't be a lot of DSCI ping-pong that this
micro-optimization could prevent.
So align the DSCI handling with what we already do for devices with
multiple Input Queues: clear it right away while processing the IRQ.
For the non-polling path this means that we no longer need to handle
the 1-queue case separately.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
This is just prep work for a subsequent patch, no functional change.
For the non-polling path we can pull the code chunk in front of the
for-loop, since it only evaluates to true for a 1-queue configuration.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Upper-layer drivers allocate their SBALs by calling qdio_alloc_buffers()
for each individual queue. But when later passing the SBAL addresses to
qdio_establish(), they need to be in a single array of pointers.
So if the driver uses multiple Input or Output queues, it needs to
allocate a temporary array just to present all its SBAL pointers in this
layout.
This patch slightly changes the format of the QDIO initialization data,
so that drivers can pass a per-queue array where each element points to
a queue's SBAL array.
zfcp doesn't use multiple queues, so the impact there is trivial.
For qeth this brings a nice reduction in complexity, and removes
a page-sized allocation.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
In preparation for a subsequent patch, move the setup of init_data into
the only caller.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
All that qdio_allocate() actually uses from the init_data is the cdev,
and the number of Input and Output Queues. Have the driver pass those as
parameters, and defer the init_data processing into qdio_establish().
This includes writing per-device(!) trace entries, and most of the
sanity checks.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
The hid-logitech-{dj,hidpp} were originally developed for unifying
receivers but since then they have evolved and now support other types
of receivers and devices. This patch adjusts the original descriptions
with this in mind.
Signed-off-by: Filipe Laíns <lains@archlinux.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The function “platform_get_irq” can log an error already.
Thus omit a redundant message for the exception handling in the
calling function.
This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/5a6cf5a7-3f27-5425-4d6a-550a17bc51e3@web.de
If io_get_req() fails, it drops a ref. Then, awhile keeping @submitted
unmodified, io_submit_sqes() breaks the loop and puts @nr - @submitted
refs. For each submitted req a ref is dropped in io_put_req() and
friends. So, for @nr taken refs there will be
(@nr - @submitted + @submitted + 1) dropped.
Remove ctx refcounting from io_get_req(), that at the same time makes
it clearer.
Fixes: 2b85edfc0c ("io_uring: batch getting pcpu references")
Cc: stable@vger.kernel.org # v5.6
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Android has long had an extension to IDLETIMER to send netlink
messages to userspace, see:
https://android.googlesource.com/kernel/common/+/refs/heads/android-mainline/include/uapi/linux/netfilter/xt_IDLETIMER.h#42
Note: this is idletimer target rev 1, there is no rev 0 in
the Android common kernel sources, see registration at:
https://android.googlesource.com/kernel/common/+/refs/heads/android-mainline/net/netfilter/xt_IDLETIMER.c#483
When we compare that to upstream's new idletimer target rev 1:
https://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf-next.git/tree/include/uapi/linux/netfilter/xt_IDLETIMER.h#n46
We immediately notice that these two rev 1 structs are the
same size and layout, and that while timer_type and send_nl_msg
are differently named and serve a different purpose, they're
at the same offset.
This makes them impossible to tell apart - and thus one cannot
know in a mixed Android/vanilla environment whether one means
timer_type or send_nl_msg.
Since this is iptables/netfilter uapi it introduces a problem
between iptables (vanilla vs Android) userspace and kernel
(vanilla vs Android) if the two don't match each other.
Additionally when at some point in the future Android picks up
5.7+ it's not at all clear how to resolve the resulting merge
conflict.
Furthermore, since upgrading the kernel on old Android phones
is pretty much impossible there does not seem to be an easy way
out of this predicament.
The only thing I've been able to come up with is some super
disgusting kernel version >= 5.7 check in the iptables binary
to flip between different struct layouts.
By adding a dummy field to the vanilla Linux kernel header file
we can force the two structs to be compatible with each other.
Long term I think I would like to deprecate send_nl_msg out of
Android entirely, but I haven't quite been able to figure out
exactly how we depend on it. It seems to be very similar to
sysfs notifications but with some extra info.
Currently it's actually always enabled whenever Android uses
the IDLETIMER target, so we could also probably entirely
remove it from the uapi in favour of just always enabling it,
but again we can't upgrade old kernels already in the field.
(Also note that this doesn't change the structure's size,
as it is simply fitting into the pre-existing padding, and
that since 5.7 hasn't been released yet, there's still time
to make this uapi visible change)
Cc: Manoj Basapathi <manojbm@codeaurora.org>
Cc: Subash Abhinov Kasiviswanathan <subashab@codeaurora.org>
Signed-off-by: Maciej Żenczykowski <maze@google.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Initialize set lookup matching element to NULL. Otherwise, the
NFT_LOOKUP_F_INV flag reverses the matching logic and it leads to
deference an uninitialized pointer to the matching element. Make sure
element data area and stateful expression are accessed if there is a
matching set element.
This patch undoes 24791b9aa1 ("netfilter: nft_set_bitmap: initialize set
element extension in lookups") which is not required anymore.
Fixes: 339706bc21 ("netfilter: nft_lookup: update element stateful expression")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
