Commit graph

932,869 commits

Author SHA1 Message Date
Eric Huang
472c89fcd5 drm/amd/powerplay: fix thermal interrupts on vega10
a bug in programming thermal interrupt register masks out
interrupts and driver cannot receive interrupts. Setting
0 to mask bits will fix it.

Signed-off-by: Eric Huang <JinHuiEric.Huang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-02-26 23:09:36 -05:00
Rex Zhu
eda9a4eb15 drm/amdgpu: Add query vram width in CGS query system info
powerplay need vram width to set default mclk optimization
settings(uphyst/downhyst/activity threshold)

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-02-26 23:09:36 -05:00
Christian König
92e71b0676 drm/amdgpu: use the TTM dummy page instead of allocating one
We have a global dummy page in TTM, use that one instead of allocating a
new one.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-02-26 23:09:36 -05:00
Rex Zhu
a02497b732 drm/amd/pp: Fix bug that dpm level was not really locked
Lock the dpm levels when we use SW method to modify
the dpm tables directly to avoid a possible race
with the smu.

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-02-26 23:09:35 -05:00
Rex Zhu
952e5daa25 drm/amd/pp: Fix error handling when smu return failed on Vega10.
Clamp the clock index to a valid range when reading it back

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-02-26 23:09:35 -05:00
Roger He
40d5250dbb drm/ttm: set TTM_OPT_FLAG_FORCE_ALLOC in ttm_bo_force_list_clean
Because ttm_bo_force_list_clean() is only called on two occasions:
1. By ttm_bo_evict_mm() during suspend.
2. By ttm_bo_clean_mm() when the driver unloads.
On both cases we absolutely don't want any memory allocation failure.

Signed-off-by: Roger He <Hongbo.He@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-02-26 23:09:34 -05:00
Roger He
aa7662b67b drm/ttm: add bit flag TTM_OPT_FLAG_FORCE_ALLOC
set TTM_OPT_FLAG_FORCE_ALLOC when we are servicing for page
fault routine.

for ttm_mem_global_reserve if in page fault routine, allow the gtt
pages reservation always. because page fault routing already grabbed
system memory and the allowance of this exception is harmless.
Otherwise, it will trigger OOM killer.

will be used later.

v2: set the FORCE_ALLOC always
v3: minor refine

Signed-off-by: Roger He <Hongbo.He@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-02-26 23:09:34 -05:00
Roger He
d330fca115 drm/ttm: use bit flag to replace allow_reserved_eviction in ttm_operation_ctx
for saving memory and more bit flag can be used in future

Signed-off-by: Roger He <Hongbo.He@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-02-26 23:09:34 -05:00
Arnd Bergmann
c02216acf4 radeon: hide pointless #warning when compile testing
In randconfig testing, we sometimes get this warning:

drivers/gpu/drm/radeon/radeon_object.c: In function 'radeon_bo_create':
drivers/gpu/drm/radeon/radeon_object.c:242:2: error: #warning Please enable CONFIG_MTRR and CONFIG_X86_PAT for better performance thanks to write-combining [-Werror=cpp]
 #warning Please enable CONFIG_MTRR and CONFIG_X86_PAT for better performance \

This is rather annoying since almost all other code produces no build-time
output unless we have found a real bug. We already fixed this in the
amdgpu driver in commit 31bb90f1cd ("drm/amdgpu: shut up #warning for
compile testing") by adding a CONFIG_COMPILE_TEST check last year and
agreed to do the same here, but both Michel and I then forgot about it
until I came across the issue again now.

For stable kernels, as this is one of very few remaining randconfig
warnings in 4.14.

Cc: stable@vger.kernel.org
Link: https://patchwork.kernel.org/patch/9550009/
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-02-26 23:09:33 -05:00
Christian König
ec92937056 drm/ttm: set page mapping during allocation
To aid debugging set the page mapping during allocation instead of
during VM faults.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Roger He <Hongbo.He@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-02-26 23:09:33 -05:00
Daniel Borkmann
d269176e76 bpf, ppc64: fix out of bounds access in tail call
While working on 16338a9b3a ("bpf, arm64: fix out of bounds access in
tail call") I noticed that ppc64 JIT is partially affected as well. While
the bound checking is correctly performed as unsigned comparison, the
register with the index value however, is never truncated into 32 bit
space, so e.g. a index value of 0x100000000ULL with a map of 1 element
would pass with PPC_CMPLW() whereas we later on continue with the full
64 bit register value. Therefore, as we do in interpreter and other JITs
truncate the value to 32 bit initially in order to fix access.

Fixes: ce0761419f ("powerpc/bpf: Implement support for tail calls")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Tested-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-02-26 19:58:09 -08:00
Eric Dumazet
4c27bf3c5b r8152: fix tx packets accounting
r8152 driver handles TSO packets (limited to ~16KB) quite well,
but pretends each TSO logical packet is a single packet on the wire.

There is also some error since headers are accounted once, but
error rate is small enough that we do not care.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-26 21:01:53 -05:00
David S. Miller
3808b51911 Merge branch '10GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queue
Jeff Kirsher says:

====================
10GbE Intel Wired LAN Driver Updates 2018-02-26

This series contains updates to ixgbe and ixgbevf only.

Colin Ian King cleans up redundant variable assignments.

Tonghao Zhang updates ixgbe to avoid writing to the hardware when the
redirection table has not changed.

Jake fixes the driver logic for checking and clearing receive timestamp
hangs so that when the PTP_RX_TIMESTAMP_IN_REGISTER flag is set, we no
longer need to check for receive timestamp hangs, which in turn will
stop the spurious log messages.

Emil updates ixgbevf with several features and improvements done in
other drivers, starting with the handling of page addresses so that we
always refer to them using a void pointer.  Added a 'legacy-rx' flag to
allow switching between the old and new receive code paths.  Added
support for using 3K buggers in order 1 page.  Updated the driver to
ensure that calls to ixgbevf_open() are rtnl lock protected and improved
the error handling when setting up multiple queues.  Added support for
providing a buffer with head room and tail room to allow for shared
info, NET_SKB_PAD, and NET_IP_ALIGN, so that we can start using
build_skb to build frames instead of using memcpy() the headers.
Updated the logic of handling rings closer to ixgbe.  Consolidated the
receive paths to reduce duplication when we expand them in the future.
Added build_skb() support to ixgbevf.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-26 20:58:25 -05:00
Jianguo Sun
80f8ce5895 clk: hi3798cv200: add COMBPHY0 clock support
The clock COMBPHY1 has already been supported by hi3798cv200 driver,
but COMBPHY0 is missing.  It adds COMBPHY0 clock support.

Since the mux table is being shared by COMBPHY0 and COMBPHY1, it renames
comphy1_mux_p and comphy1_mux_table a bit to drop instance number '1'
from there.

Signed-off-by: Jianguo Sun <sunjianguo1@huawei.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2018-02-27 09:19:12 +08:00
Shawn Guo
a44d1f531a clk: hi3798cv200: fix define indentation
It's a coding-style fix, which corrects the indentation for all those
clock definitions, so that the code looks nicer and new definitions can
be added with a recommended indentation.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2018-02-27 09:19:12 +08:00
Shawn Guo
50fd588ae4 clk: hi3798cv200: add support for HISTB_USB2_OTG_UTMI_CLK
The clock HISTB_USB2_OTG_UTMI_CLK is defined by device tree bindings in
include/dt-bindings/clock/histb-clock.h, but hasn't been supported by
hi3798cv200 clock driver.  Let's add the support for it.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2018-02-27 09:19:12 +08:00
Younian Wang
47629f6765 clk: hi3798cv200: correct IR clock parent
The IR clock is sourced from '24m' rather than '100m'.  Correct it.

Signed-off-by: Younian Wang <wangyounian@hisilicon.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2018-02-27 09:19:12 +08:00
Shawn Guo
055d56891e clk: hi3798cv200: fix unregister call sequence in error path
The unregister call sequence in error path of function
hi3798cv200_clk_register() should be opposite to the order of register
calls.  Let's reverse the call sequence to fix the problem.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2018-02-27 09:19:12 +08:00
Jeremy Boone
3be2327475 tpm: fix potential buffer overruns caused by bit glitches on the bus
Discrete TPMs are often connected over slow serial buses which, on
some platforms, can have glitches causing bit flips.  If a bit does
flip it could cause an overrun if it's in one of the size parameters,
so sanity check that we're not overrunning the provided buffer when
doing a memcpy().

Signed-off-by: Jeremy Boone <jeremy.boone@nccgroup.trust>
Cc: stable@vger.kernel.org
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: James Morris <james.morris@microsoft.com>
2018-02-26 15:43:46 -08:00
Jeremy Boone
6d24cd186d tpm: st33zp24: fix potential buffer overruns caused by bit glitches on the bus
Discrete TPMs are often connected over slow serial buses which, on
some platforms, can have glitches causing bit flips.  In all the
driver _recv() functions, we need to use a u32 to unmarshal the
response size, otherwise a bit flip of the 31st bit would cause the
expected variable to go negative, which would then try to read a huge
amount of data.  Also sanity check that the expected amount of data is
large enough for the TPM header.

Signed-off-by: Jeremy Boone <jeremy.boone@nccgroup.trust>
Cc: stable@vger.kernel.org
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: James Morris <james.morris@microsoft.com>
2018-02-26 15:43:45 -08:00
Jeremy Boone
9b8cb28d7c tpm_i2c_infineon: fix potential buffer overruns caused by bit glitches on the bus
Discrete TPMs are often connected over slow serial buses which, on
some platforms, can have glitches causing bit flips.  In all the
driver _recv() functions, we need to use a u32 to unmarshal the
response size, otherwise a bit flip of the 31st bit would cause the
expected variable to go negative, which would then try to read a huge
amount of data.  Also sanity check that the expected amount of data is
large enough for the TPM header.

Signed-off-by: Jeremy Boone <jeremy.boone@nccgroup.trust>
Cc: stable@vger.kernel.org
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: James Morris <james.morris@microsoft.com>
2018-02-26 15:43:44 -08:00
Jeremy Boone
f9d4d9b5a5 tpm_i2c_nuvoton: fix potential buffer overruns caused by bit glitches on the bus
Discrete TPMs are often connected over slow serial buses which, on
some platforms, can have glitches causing bit flips.  In all the
driver _recv() functions, we need to use a u32 to unmarshal the
response size, otherwise a bit flip of the 31st bit would cause the
expected variable to go negative, which would then try to read a huge
amount of data.  Also sanity check that the expected amount of data is
large enough for the TPM header.

Signed-off-by: Jeremy Boone <jeremy.boone@nccgroup.trust>
Cc: stable@vger.kernel.org
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: James Morris <james.morris@microsoft.com>
2018-02-26 15:43:44 -08:00
Jeremy Boone
6bb320ca4a tpm_tis: fix potential buffer overruns caused by bit glitches on the bus
Discrete TPMs are often connected over slow serial buses which, on
some platforms, can have glitches causing bit flips.  In all the
driver _recv() functions, we need to use a u32 to unmarshal the
response size, otherwise a bit flip of the 31st bit would cause the
expected variable to go negative, which would then try to read a huge
amount of data.  Also sanity check that the expected amount of data is
large enough for the TPM header.

Signed-off-by: Jeremy Boone <jeremy.boone@nccgroup.trust>
Cc: stable@vger.kernel.org
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: James Morris <james.morris@microsoft.com>
2018-02-26 15:43:43 -08:00
Stefan Wahren
bb9d91a4e5 ARM: multi_v7_defconfig: Enable thermal driver for RPi 2/3
This turns on the CONFIG_BCM2835_THERMAL as module for
Raspberry Pi 2 and 3.

Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
2018-02-26 15:30:43 -08:00
Stefan Wahren
4e46a8583b ARM: bcm2385_defconfig: Enable BT support for BCM43438
The Raspberry Pi Zero W has an onboard BT chip (BCM43438). So enable the
necessary HCI UART driver (requires serial device bus).

Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
2018-02-26 15:30:00 -08:00
Shuah Khan
f6869826de selftests: vm: update .gitignore with new test
Update .gitignore with new test.

Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
2018-02-26 16:09:50 -07:00
Shuah Khan
16c513b134 selftests: memory-hotplug: silence test command echo
Silence the following command being printed while running test.

./mem-on-off-test.sh -r 2 && echo "selftests: memory-hotplug [PASS]" ||
echo "selftests: memory-hotplug [FAIL]"

Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
2018-02-26 16:09:49 -07:00
Daniel Díaz
067b25a563 selftests/futex: Fix line continuation in Makefile
The Makefile lacks a couple of line continuation backslashes
in an `if' clause, which produces an error when make versions
prior to 4.x are used for building the tests.

  $ make
  make[1]: Entering directory `/[...]/linux/tools/testing/selftests/futex'
  /bin/sh: -c: line 5: syntax error: unexpected end of file
  make[1]: *** [all] Error 1
  make[1]: Leaving directory `/[...]/linux/tools/testing/selftests/futex'
  make: *** [all] Error 2

Signed-off-by: Daniel Díaz <daniel.diaz@linaro.org>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
2018-02-26 16:09:49 -07:00
Stefan Wahren
bcc76c4014 ARM: dts: bcm2835-rpi-zero-w: Enable OTG mode
Since commit 9273083a15 ("usb: dwc2: Fix TxFIFOn sizes and total TxFIFO
size issues") we could use the OTG mode again.

Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
2018-02-26 15:02:23 -08:00
Stefan Wahren
aa181326b9 ARM: dts: bcm2835-rpi-zero-w: Add bcm43438 serial slave
Add BCM43438 (bluetooth) as a serdev slave device of uart0 (pl011/ttyAMA0).
This allows to automatically insert the bcm43438 to the bluetooth
subsystem instead of relying on patched userspace helpers (hciattach).

In order to keep a debug UART we need to switch to uart1.

Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
2018-02-26 15:00:18 -08:00
Stefan Wahren
a166ae400d ARM: dts: bcm283x: Apply pull settings to Zero W relevant groups
Instead of keeping the firmware's pull settings, we better apply
them via the devicetree pin control. Start with the RPi Zero W relevant
first to keep the effort low.

Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
2018-02-26 15:00:13 -08:00
Arnd Bergmann
2572f5b424 selinux: fix typo in selinux_netlbl_sctp_sk_clone declaration
A missing 'struct' keyword caused a build error when CONFIG_NETLABEL
is disabled:

In file included from security/selinux/hooks.c:99:
security/selinux/include/netlabel.h:135:66: error: unknown type name 'sock'
 static inline void selinux_netlbl_sctp_sk_clone(struct sock *sk, sock *newsk)
                                                                  ^~~~
security/selinux/hooks.c: In function 'selinux_sctp_sk_clone':
security/selinux/hooks.c:5188:2: error: implicit declaration of function 'selinux_netlbl_sctp_sk_clone'; did you mean 'selinux_netlbl_inet_csk_clone'? [-Werror=implicit-function-declaration]

Fixes: db97c9f9d312 ("selinux: Add SCTP support")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Paul Moore <paul@paul-moore.com>
2018-02-26 17:45:32 -05:00
Richard Haines
d452930fd3 selinux: Add SCTP support
The SELinux SCTP implementation is explained in:
Documentation/security/SELinux-sctp.rst

Signed-off-by: Richard Haines <richard_c_haines@btinternet.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
2018-02-26 17:45:25 -05:00
Richard Haines
2277c7cd75 sctp: Add LSM hooks
Add security hooks allowing security modules to exercise access control
over SCTP.

Signed-off-by: Richard Haines <richard_c_haines@btinternet.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
2018-02-26 17:45:23 -05:00
Richard Haines
b7e10c25b8 sctp: Add ip option support
Add ip option support to allow LSM security modules to utilise CIPSO/IPv4
and CALIPSO/IPv6 services.

Signed-off-by: Richard Haines <richard_c_haines@btinternet.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
2018-02-26 17:43:54 -05:00
Sudeep Holla
5c8b2623f6 cpufreq: scpi: Fix incorrect arm_big_little config dependency
Commit 343a8d17fa (cpufreq: scpi: remove arm_big_little dependency)
removed the SCPI cpufreq dependency on arm_big_little cpufreq driver.
However the Kconfig entry still depends on ARM_BIG_LITTLE_CPUFREQ
which is clearly wrong.

This patch removes that unnecessary Kconfig dependency.

Fixes: 343a8d17fa (cpufreq: scpi: remove arm_big_little dependency)
Reported-by: Quentin Perret <quentin.perret@arm.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-02-26 23:29:19 +01:00
Dietmar Eggemann
9326fdf3fb cpufreq: scpi: invoke frequency-invariance setter function
Commit 343a8d17fa (cpufreq: scpi: remove arm_big_little dependency)
changed the cpufreq driver on juno from arm_big_little to scpi.

The scpi set_target function does not call the frequency-invariance
setter function arch_set_freq_scale() like the arm_big_little set_target
function does. As a result the task scheduler load and utilization
signals are not frequency-invariant on this platform anymore.

Fix this by adding a call to arch_set_freq_scale() into
scpi_cpufreq_set_target().

Fixes: 343a8d17fa (cpufreq: scpi: remove arm_big_little dependency)
Signed-off-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-02-26 23:27:56 +01:00
Tony Lindgren
da997b22c4 PM / wakeirq: Add wakeup name to dedicated wake irqs
This makes it easy to grep :wakeup /proc/interrupts.

Suggested-by: Jeffy Chen <jeffy.chen@rock-chips.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-02-26 23:23:37 +01:00
Tony Lindgren
a885f0fe20 bus: ti-sysc: Handle some devices in omap_device compatible way
Now that ti-sysc can manage child devices, we must also be backwards
compatible with the current omap_device code. With omap_device, we
assume that the child device manages the interconnect target module
directly.

The drivers needing special handling are the ones that still set
pm_runtime_irq_safe(). In the long run we want to update those drivers
as otherwise they will cause problems with genpd as a permanent PM
runtime usage count is set on the parent device.

We can handle omap_device these devices by improving the ti-sysc quirk
handling to detect the devices needing special handling based on
register map and revision register if usable. We also need to implement
dev_pm_domain for these child devices just like omap_device does.

Signed-off-by: Tony Lindgren <tony@atomide.com>
2018-02-26 14:16:11 -08:00
Tony Lindgren
ef70b0bdea bus: ti-sysc: Add support for platform data callbacks
We want to pass the device tree configuration for interconnect target
modules from ti-sysc driver to the existing platform hwmod code.

This allows us to first validate the dts data against the existing
platform data before we start dropping the platform data in favor of
device tree data.

To do this, let's add platform data callbacks for PM runtime functions
to call for the interconnect target modules if platform data is
available.

Note that as ti-sysc driver can rebind, omap_auxdata_lookup and related
functions can no longer be __init.

Signed-off-by: Tony Lindgren <tony@atomide.com>
2018-02-26 14:16:11 -08:00
Tony Lindgren
dd57ac1e5c bus: ti-sysc: Remove unnecessary debugging statements
We already show the status for the interconnect target module
when debugging is enabled, there's no need to be more verbose
about that. So let's just cut down the noise and remove the
extra debug statements.

Signed-off-by: Tony Lindgren <tony@atomide.coM>
2018-02-26 14:16:10 -08:00
Tony Lindgren
76f0f772e4 bus: ti-sysc: Improve handling for no-reset-on-init and no-idle-on-init
At least earlycon needs a delayed idle before the 8250 driver probes
to avoid glitches in the console output. Let's handle the delayed idle
for devices tagged with ti,no-reset-on-init and ti,no-idle-on-init with
delayed_work. Others don't need it, and there should be no need to use
runtime PM autosuspend for the interconnect target driver as it's the
child device drivers that should configure it.

Signed-off-by: Tony Lindgren <tony@atomide.com>
2018-02-26 14:16:10 -08:00
Tony Lindgren
3bb37c8e6e bus: ti-sysc: Handle stdout-path for debug console
If we have stdout-path specified for earlycon, we must prevent
the debug console from idling until runtime PM kicks in.

Signed-off-by: Tony Lindgren <tony@atomide.com>
2018-02-26 14:16:10 -08:00
Tony Lindgren
62020f2312 bus: ti-sysc: Add suspend and resume handling
This allows us to idle the module on suspend after the children
are suspended.

Signed-off-by: Tony Lindgren <tony@atomide.com>
2018-02-26 14:16:10 -08:00
Tony Lindgren
2c355ff6b6 bus: ti-sysc: Add fck clock alias for children with notifier_block
The functional clock is used by several child device drivers to query
the rate for the child device internal configuration. The functional
clock is really for the whole interconnect target module, and not just
for the child device, and can also be shared across multiple children.
At least the timers, i2c and mmc driver query the fck for rate.

So let's just create a clock alias for the child fck if it does not
yet exits. We can do this with the BUS_NOTIFY_ADD_DEVICE before the
child is probed.

Note that we need to now also remove the legacy mode check for getting
the dts clocks in ti-sysc driver.

Signed-off-by: Tony Lindgren <tony@atomide.com>
2018-02-26 14:16:10 -08:00
Andy Shevchenko
c5b2409164 ipmi: Re-use existing macros for built-in properties
Replace home grown set_prop_entry() macro by generic
PROPERTY_ENTRY_INTEGER()-like ones.

Cc: Corey Minyard <cminyard@mvista.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
2018-02-26 15:33:13 -06:00
Linus Torvalds
6f70eb2b00 Merge branch 'idr-2018-02-06' of git://git.infradead.org/users/willy/linux-dax
Pull idr fixes from Matthew Wilcox:
 "One test-suite build fix for you and one run-time regression fix.

  The regression fix includes new tests to make sure they don't pop back
  up."

* 'idr-2018-02-06' of git://git.infradead.org/users/willy/linux-dax:
  idr: Fix handling of IDs above INT_MAX
  radix tree test suite: Fix build
2018-02-26 13:22:45 -08:00
Christian König
c37406e05d PCI: Allow release of resources that were never assigned
It is entirely possible that the BIOS wasn't able to assign resources to a
device. In this case don't crash in pci_release_resource() when we try to
resize the resource.

Fixes: 8bb705e3e7 ("PCI: Add pci_resize_resource() for resizing BARs")
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
CC: stable@vger.kernel.org	# v4.15+
2018-02-26 14:51:13 -06:00
Linus Walleij
29d1d52b06 ARM: dts: Set D-Link DNS-313 SATA to muxmode 0
This stops the driver from trying to probe the ATA slave
interface. The vendor code enables the slave interface
but the driver in the vendor tree does not make use of
it.

Setting it to muxmode 0 disables the slave interface:
the hardware only has the master interface connected
to the one harddrive slot anyways.

Without this change booting takes excessive time, so it
is very annoying to end users.

Fixes: dd5c0561db ("ARM: dts: Add basic devicetree for D-Link DNS-313")
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2018-02-26 21:41:44 +01:00
Dan Carpenter
5dd3691c98 i40e: remove some stray indenting
These two lines are indented too far.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-02-26 12:40:39 -08:00