In many cases, page tables can be accessed concurrently by either another
CPU (due to things like fast gup) or by the hardware page table walker
itself, which may set access/dirty bits. In such cases, it is important
to use READ_ONCE/WRITE_ONCE when accessing page table entries so that
entries cannot be torn, merged or subject to apparent loss of coherence
due to compiler transformations.
Whilst there are some scenarios where this cannot happen (e.g. pinned
kernel mappings for the linear region), the overhead of using READ_ONCE
/WRITE_ONCE everywhere is minimal and makes the code an awful lot easier
to reason about. This patch consistently uses these macros in the arch
code, as well as explicitly namespacing pointers to page table entries
from the entries themselves by using adopting a 'p' suffix for the former
(as is sometimes used elsewhere in the kernel source).
Tested-by: Yury Norov <ynorov@caviumnetworks.com>
Tested-by: Richard Ruigrok <rruigrok@codeaurora.org>
Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
This should speed up accessing new system calls introduced with the
kernel rather than waiting for libaudit updates to include them.
It also enables users to specify wildcards, for example, perf trace -e
'open*', just like was already possible on x86 and s390.
Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Thomas Richter <tmricht@linux.vnet.ibm.com>
Cc: linuxppc-dev@lists.ozlabs.org
Link: http://lkml.kernel.org/r/20180129083417.31240-4-ravi.bangoria@linux.vnet.ibm.com
[ Do it for ppc32 as well ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This should speed up accessing new system calls introduced with the
kernel rather than waiting for libaudit updates to include them.
Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Thomas Richter <tmricht@linux.vnet.ibm.com>
Cc: linuxppc-dev@lists.ozlabs.org
Link: http://lkml.kernel.org/r/20180129083417.31240-3-ravi.bangoria@linux.vnet.ibm.com
[ Made it generate syscall_32.c as well to fix the build on 32-bit ppc ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Will be used for generating the syscall id/string translation table.
Committer notes:
Update it already to catch with these csets applied since Ravi first
submitted this patch:
3350eb2ea1 powerpc: sys_pkey_mprotect() system call
9499ec1b5e powerpc: sys_pkey_alloc() and sys_pkey_free() system calls
So now 'perf trace' on ppc now knows about the pkey_ syscals.
Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Thomas Richter <tmricht@linux.vnet.ibm.com>
Cc: linuxppc-dev@lists.ozlabs.org
Link: http://lkml.kernel.org/r/20180129083417.31240-2-ravi.bangoria@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Jin Yao reported memory corrupton in perf report with
branch info used for stack trace:
> Following command lines will cause perf crash.
> perf record -j call -g -a <application>
> perf report --branch-history
>
> *** Error in `perf': double free or corruption (!prev): 0x00000000104aa040 ***
> ======= Backtrace: =========
> /lib/x86_64-linux-gnu/libc.so.6(+0x77725)[0x7f6b37254725]
> /lib/x86_64-linux-gnu/libc.so.6(+0x7ff4a)[0x7f6b3725cf4a]
> /lib/x86_64-linux-gnu/libc.so.6(cfree+0x4c)[0x7f6b37260abc]
> perf[0x51b914]
> perf(hist_entry_iter__add+0x1e5)[0x51f305]
> perf[0x43cf01]
> perf[0x4fa3bf]
> perf[0x4fa923]
> perf[0x4fd396]
> perf[0x4f9614]
> perf(perf_session__process_events+0x89e)[0x4fc38e]
> perf(cmd_report+0x15d2)[0x43f202]
> perf[0x4a059f]
> perf(main+0x631)[0x427b71]
> /lib/x86_64-linux-gnu/libc.so.6(__libc_start_main+0xf0)[0x7f6b371fd830]
> perf(_start+0x29)[0x427d89]
For the cumulative output, we allocate the he_cache array based on the
--max-stack option value and populate it with data from 'callchain_cursor'.
The --max-stack option value does not ensure now the limit for number of
callchain_cursor nodes, so the cumulative iter code will allocate smaller array
than it's actually needed and cause above corruption.
I think the --max-stack limit does not apply here anyway, because we add
callchain data as normal hist entries, while the --max-stack control the limit
of single entry callchain depth.
Using the callchain_cursor.nr as he_cache array count to fix this. Also
removing struct hist_entry_iter::max_stack, because there's no longer any use
for it.
We need more fixes to ensure that the branch stack code follows properly the
logic of --max-stack, which is not the case at the moment.
Original-patch-by: Jin Yao <yao.jin@linux.intel.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Reported-by: Jin Yao <yao.jin@linux.intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20180216123619.GA9945@krava
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When we use perf report interactive annotate view, we can see
the position of jump arrow is not correct. For example,
1. perf record -b ...
2. perf report
3. In interactive mode, select Annotate 'function'
Percent│ IPC Cycle
│ if (flag)
1.37 │0.4┌── 1 ↓ je 82
│ │ x += x / y + y / x;
0.00 │0.4│ 1310 movsd (%rsp),%xmm0
0.00 │0.4│ 565 movsd 0x8(%rsp),%xmm4
│0.4│ movsd 0x8(%rsp),%xmm1
│0.4│ movsd (%rsp),%xmm3
│0.4│ divsd %xmm4,%xmm0
0.00 │0.4│ 579 divsd %xmm3,%xmm1
│0.4│ movsd (%rsp),%xmm2
│0.4│ addsd %xmm1,%xmm0
│0.4│ addsd %xmm2,%xmm0
0.00 │0.4│ movsd %xmm0,(%rsp)
│ │ volatile double x = 1212121212, y = 121212;
│ │
│ │ s_randseed = time(0);
│ │ srand(s_randseed);
│ │
│ │ for (i = 0; i < 2000000000; i++) {
1.37 │0.4└─→ 82: sub $0x1,%ebx
28.21 │0.48 17 ↑ jne 38
The jump arrow in above example is not correct. It should add the
width of IPC and Cycle.
With this patch, the result is:
Percent│ IPC Cycle
│ if (flag)
1.37 │0.48 1 ┌──je 82
│ │ x += x / y + y / x;
0.00 │0.48 1310 │ movsd (%rsp),%xmm0
0.00 │0.48 565 │ movsd 0x8(%rsp),%xmm4
│0.48 │ movsd 0x8(%rsp),%xmm1
│0.48 │ movsd (%rsp),%xmm3
│0.48 │ divsd %xmm4,%xmm0
0.00 │0.48 579 │ divsd %xmm3,%xmm1
│0.48 │ movsd (%rsp),%xmm2
│0.48 │ addsd %xmm1,%xmm0
│0.48 │ addsd %xmm2,%xmm0
0.00 │0.48 │ movsd %xmm0,(%rsp)
│ │ volatile double x = 1212121212, y = 121212;
│ │
│ │ s_randseed = time(0);
│ │ srand(s_randseed);
│ │
│ │ for (i = 0; i < 2000000000; i++) {
1.37 │0.48 82:└─→sub $0x1,%ebx
28.21 │0.48 17 ↑ jne 38
Committer notes:
Please note that only from LBRv5 (according to Jiri) onwards, i.e. >=
Skylake is that we'll have the cycles counts in each branch record
entry, so to see the Cycles and IPC columns, and be able to test this
patch, one need a capable hardware.
While applying this I first tested it on a Broadwell class machine and
couldn't get those columns, will add code to the annotate browser to
warn the user about that, i.e. you have branch records, but no cycles,
use a more recent hardware to get the cycles and IPC columns.
Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jin Yao <yao.jin@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1517223473-14750-1-git-send-email-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
There may be discontinuities in the ETM trace stream due to overflows or
ETM configuration for selective trace. This patch emits an instruction
sample with the pending branch stack when a TRACE ON packet occurs
indicating a discontinuity in the trace data.
A new packet type CS_ETM_TRACE_ON is added, which is emitted by the low
level decoder when a TRACE ON occurs. The higher level decoder flushes
the branch stack when this packet is emitted.
Signed-off-by: Robert Walker <robert.walker@arm.com>
Acked-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: coresight@lists.linaro.org
Cc: linux-arm-kernel@lists.infradead.org
Link: http://lkml.kernel.org/r/1518607481-4059-3-git-send-email-robert.walker@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Added user space perf functionality to translate CoreSight traces into
instruction events with branch stack.
To invoke the new functionality, use the perf inject tool with
--itrace=il. For example, to translate the ETM trace from perf.data into
last branch records in a new inj.data file:
$ perf inject --itrace=i100000il128 -i perf.data -o perf.data.new
The 'i' parameter to itrace generates periodic instruction events. The
period between instruction events can be specified as a number of
instructions suffixed by i (default 100000).
The parameter to 'l' specifies the number of entries in the branch stack
attached to instruction events.
The 'b' parameter to itrace generates events on taken branches.
This patch also fixes the contents of the branch events used in perf
report - previously branch events were generated for each contiguous
range of instructions executed. These are fixed to generate branch
events between the last address of a range ending in an executed branch
instruction and the start address of the next range.
Based on patches by Sebastian Pop <s.pop@samsung.com> with additional fixes
and support for specifying the instruction period.
Originally-by: Sebastian Pop <s.pop@samsung.com>
Signed-off-by: Robert Walker <robert.walker@arm.com>
Acked-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: coresight@lists.linaro.org
Cc: linux-arm-kernel@lists.infradead.org
Link: http://lkml.kernel.org/r/1518607481-4059-2-git-send-email-robert.walker@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add the missing --force option on the man page.
Signed-off-by: Sangwon Hong <qpakzk@gmail.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Taeung Song <treeze.taeung@gmail.com>
Link: http://lkml.kernel.org/r/1518381517-30766-2-git-send-email-qpakzk@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
First, 'perf kmem' has a '--force' option, but didn't document it on the
man page. So add it.
Second, the '--time' option has to get a value, but isn't documented on
the man page. Describe it.
Signed-off-by: Sangwon Hong <qpakzk@gmail.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Taeung Song <treeze.taeung@gmail.com>
Link: http://lkml.kernel.org/r/1518381517-30766-1-git-send-email-qpakzk@gmail.com
[ Add blank like after --force block, as requested by Namhyung ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Some options must require an argument. But input, stdio-color, cpu have
no them. So I added it.
Signed-off-by: Jaecheol Shin <jcgod413@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Taeung Song <treeze.taeung@gmail.com>
Link: http://lkml.kernel.org/r/20180207095205.62715-1-jcgod413@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patch allows the CoreSight AUX info section to fit topologies where
only a subset of all available CPUs are present, avoiding at the same
time accessing the ETM configuration areas of CPUs that have been
offlined.
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: linux-arm-kernel@lists.infradead.org
Link: http://lkml.kernel.org/r/1518478737-24649-1-git-send-email-mathieu.poirier@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When working natively on arm64 the compiler gets pesky and complains
that variable 'i' is uninitialised, something that breaks the
compilation. Here no further checks are needed since variable
'found_spe' can only be true if variable 'i' has been initialised as
part of the for loop.
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: linux-arm-kernel@lists.infradead.org
Link: http://lkml.kernel.org/r/1518467557-18505-4-git-send-email-mathieu.poirier@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Mathieu Poirier reports issue in commit ("73c0ca1eee perf thread_map:
Enumerate all threads from /proc") that it has negative impact on 'perf
record --per-thread'. It has the effect of creating a kernel event for
each thread in the system for 'perf record --per-thread'.
Mathieu Poirier's patch ("perf util: Do not reuse target->per_thread flag")
can fix this issue by creating a new target->all_threads flag.
This patch is based on Mathieu Poirier's patch but it doesn't use a new
target->all_threads flag. This patch just uses 'target->per_thread &&
target->system_wide' as a condition to check for all threads case.
Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: linux-arm-kernel@lists.infradead.org
Fixes: 73c0ca1eee ("perf thread_map: Enumerate all threads from /proc")
Link: http://lkml.kernel.org/r/1518467557-18505-3-git-send-email-mathieu.poirier@linaro.org
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
[Fixed checkpatch warning about line over 80 characters]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patch frees all the memory allocated in function
cs_etm__alloc_queue().
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: linux-arm-kernel@lists.infradead.org
Link: http://lkml.kernel.org/r/1518467557-18505-2-git-send-email-mathieu.poirier@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We get a warning about some slow configurations in randconfig kernels:
mm/memory.c:83:2: error: #warning Unfortunate NUMA and NUMA Balancing config, growing page-frame for last_cpupid. [-Werror=cpp]
The warning is reasonable by itself, but gets in the way of randconfig
build testing, so I'm hiding it whenever CONFIG_COMPILE_TEST is set.
The warning was added in 2013 in commit 75980e97da ("mm: fold
page->_last_nid into page->flags where possible").
Cc: stable@vger.kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
A few fixes for outstanding MIPS issues:
- An __init section mismatch warning when brcmstb_pm is enabled.
- A regression handling multiple mem=X@Y arguments (4.11).
- A USB Kconfig select warning, and related sparc cleanup (4.16).
-----BEGIN PGP SIGNATURE-----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=BGD8
-----END PGP SIGNATURE-----
Merge tag 'mips_fixes_4.16_2' of git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/mips
Pull MIPS fixes from James Hogan:
"A few fixes for outstanding MIPS issues:
- an __init section mismatch warning when brcmstb_pm is enabled
- a regression handling multiple mem=X@Y arguments (4.11)
- a USB Kconfig select warning, and related sparc cleanup (4.16)"
* tag 'mips_fixes_4.16_2' of git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/mips:
sparc,leon: Select USB_UHCI_BIG_ENDIAN_{MMIO,DESC}
usb: Move USB_UHCI_BIG_ENDIAN_* out of USB_SUPPORT
MIPS: Fix incorrect mem=X@Y handling
MIPS: BMIPS: Fix section mismatch warning
-----BEGIN PGP SIGNATURE-----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=VeA/
-----END PGP SIGNATURE-----
Merge tag 'for-4.16-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
"We have a few assorted fixes, some of them show up during fstests so I
gave them more testing"
* tag 'for-4.16-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: Fix use-after-free when cleaning up fs_devs with a single stale device
Btrfs: fix null pointer dereference when replacing missing device
btrfs: remove spurious WARN_ON(ref->count < 0) in find_parent_nodes
btrfs: Ignore errors from btrfs_qgroup_trace_extent_post
Btrfs: fix unexpected -EEXIST when creating new inode
Btrfs: fix use-after-free on root->orphan_block_rsv
Btrfs: fix btrfs_evict_inode to handle abnormal inodes correctly
Btrfs: fix extent state leak from tree log
Btrfs: fix crash due to not cleaning up tree log block's dirty bits
Btrfs: fix deadlock in run_delalloc_nocow
The symbol search called by machine__find_kernel_symbol_by_name is using
internally arch__compare_symbol_names function to compare 2 symbol
names, because different archs have different ways of comparing symbols.
Mostly for skipping '.' prefixes and similar.
In test 1 when we try to find matching symbols in kallsyms and vmlinux,
by address and by symbol name. When either is found we compare the pair
symbol names by simple strcmp, which is not good enough for reasons
explained in previous paragraph.
On powerpc this can cause lockup, because even thought we found the
pair, the compared names are different and don't match simple strcmp.
Following code path is executed, that leads to lockup:
- we find the pair in kallsyms by sym->start
next_pair:
- we compare the names and it fails
- we find the pair by sym->name
- the pair addresses match so we call goto next_pair
because we assume the names match in this case
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Acked-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Fixes: 031b84c407 ("perf probe ppc: Enable matching against dot symbols automatically")
Link: http://lkml.kernel.org/r/20180215122635.24029-10-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
There's no need for kernel maps to be allocated at this point - sample
processing.
We search for kernel maps using the kernel map_groups in machine::kmaps
which is static. If vmlinux maps for any reason still don't exist, the
search correctly fails because they are not in the map group.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20180215122635.24029-9-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The current machine__load_kallsyms() function has no caller, so replace
it directly with __machine__load_kallsyms(). Also remove the no_kcore
argument as it was always called with a 'true' value.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20180215122635.24029-8-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We should not search for the kernel start address in
__machine__create_kernel_maps(), because it's being used in the 'report'
code path, where we are interested in kernel MMAP data address (the one
recorded via 'perf record', possibly on another machine, or an older or
newer kernel on the same machine where analysis is being performed)
instead of in current kernel address.
The __machine__create_kernel_maps() function serves purely for creating
the machines kernel maps and setting up the kmap group. The report code
path then sets the address based on the data from kernel MMAP event in
the machine__set_kernel_mmap() function.
The kallsyms search address logic is used for test code, that calls
machine__create_kernel_maps() to get current maps and calls
machine__get_running_kernel_start() to get kernel starting address.
Use machine__set_kernel_mmap() to set the kernel maps start address and
moving map_groups__fixup_end to be call when all maps are in place.
Also make __machine__create_kernel_maps static, because there's no
external user.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20180215122635.24029-7-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
So it could be called without event object, just with start and end
values. It will be used in following patch.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20180215122635.24029-6-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It simplifies and centralizes the code. The kernel mmap name is set for
machine type, which we know from the beginning, so there's no reason to
generate it every time we need it.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20180215122635.24029-5-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Free root_dir in machine__init() error path.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20180215122635.24029-4-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The current code in dso__load() calls is_regular_file(), but it checks
its return value only after calling symsrc__init().
That can make symsrc__init() block in elf_* functions on reading
the file if the file happens to be device and not regular one.
Call symsrc__init() only for regular files. Also remove the
symsrc__destroy() cleanup, which is not needed now, because we call
symsrc__init() only for regular files.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20180215122635.24029-3-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adding check on failed attempt to parse the address and skip the line
parsing early in that case.
The address can be replaced with '(null)' string in case user don't have
enough permissions, like:
$ cat /proc/kallsyms
(null) A irq_stack_union
(null) A __per_cpu_start
...
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20180215122635.24029-2-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
non-zero error with 0). This is particularly important given DM
core's increased use of chained bios.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJahv8zAAoJEMUj8QotnQNaiCEH/Attdh6bOzUImbdxIpFWJNNk
F3Jyhge+OI3OHTAbyslFBl3kF0M7jZS3xq9wLpyIb/iIBs6o0N7eGNjkVuDg+Xnw
/SwWNyM1KBr+eYIs55T3KY1vX4YKzwO65hm4sXN6GiSMxPeFsXRTcPJKYzhW42ST
2gKqbtWG9JDyAZgdIFe0AYQF+oVYPX8lCEPNXy7WtmMCFjRan/g7FT0i14GSHy7S
YnQn+Db6Z/BzApDxAozrzj6OUxlVAgIo+6qp/jR8CoN4TX/V8L6gmLWlirrTJxr0
9hET9/NFMWoR9j3Jfatw2YyuMV2LnMo9FJVW9+cRHMLi5NSUdk03A+H1CgsTSNk=
=z7xt
-----END PGP SIGNATURE-----
Merge tag 'for-4.16/dm-chained-bios-fix' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper fix from Mike Snitzer:
"Fix for DM core to properly propagate errors (avoids overriding
non-zero error with 0). This is particularly important given DM core's
increased use of chained bios"
* tag 'for-4.16/dm-chained-bios-fix' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
dm: correctly handle chained bios in dec_pending()
Regression fix in keyboard support for Dell laptops.
Prevent out-of-boundary write in WMI bus driver.
Increase timeout to read functional key status on Lenovo laptops.
The following is an automated git shortlog grouped by driver:
dell-laptop:
- Removed duplicates in DMI whitelist
- fix kbd_get_state's request value
ideapad-laptop:
- Increase timeout to wait for EC answer
wmi:
- fix off-by-one write in wmi_dev_probe()
-----BEGIN PGP SIGNATURE-----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=VkoD
-----END PGP SIGNATURE-----
Merge tag 'platform-drivers-x86-v4.16-4' of git://git.infradead.org/linux-platform-drivers-x86
Pull x86 platform driver fixes from Andy Shevchenko:
- regression fix in keyboard support for Dell laptops
- prevent out-of-boundary write in WMI bus driver
- increase timeout to read functional key status on Lenovo laptops
* tag 'platform-drivers-x86-v4.16-4' of git://git.infradead.org/linux-platform-drivers-x86:
platform/x86: dell-laptop: Removed duplicates in DMI whitelist
platform/x86: dell-laptop: fix kbd_get_state's request value
platform/x86: ideapad-laptop: Increase timeout to wait for EC answer
platform/x86: wmi: fix off-by-one write in wmi_dev_probe()
uaccess_kernel() isn't sufficient to determine if an rdma resource is
user-mode or not. For example, resources allocated in the add_one()
function of an ib_client get falsely labeled as user mode, when they
are kernel mode allocations. EG: mad qps.
The result is that these qps are skipped over during a nldev query
because of an erroneous namespace mismatch.
So now we determine if the resource is user-mode by looking at the object
struct's uobject or similar pointer to know if it was allocated for user
mode applications.
Fixes: 02d8883f52 ("RDMA/restrack: Add general infrastructure to track RDMA resources")
Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Currently, same stm32f746-pinctrl driver is used for stm32f746 and
stm32f769 MCU. As pin map is different between those 2 MCUs,
a stm32f769-pinctrl driver has been recently added.
This patch
-allows to use stm32f769-pinctrl driver for stm32f769 boards
-reworks stm32 devicetree files to fit with stm32f746 / stm32f769
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
A collection of usual suspects:
- A handful USB-audio and HD-audio device-specific quirks
- Some trivial fixes for the new AC97 bus stuff
- Another race fix in ALSA sequencer core
-----BEGIN PGP SIGNATURE-----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=UMDx
-----END PGP SIGNATURE-----
Merge tag 'sound-4.16-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A collection of usual suspects:
- a handful USB-audio and HD-audio device-specific quirks
- some trivial fixes for the new AC97 bus stuff
- another race fix in ALSA sequencer core"
* tag 'sound-4.16-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: hda/realtek: PCI quirk for Fujitsu U7x7
ALSA: seq: Fix racy pool initializations
ALSA: usb: add more device quirks for USB DSD devices
ALSA: usb-audio: Fix UAC2 get_ctl request with a RANGE attribute
ALSA: ac97: Fix copy and paste typo in documentation
ALSA: usb-audio: add implicit fb quirk for Behringer UFX1204
ALSA: ac97: kconfig: Remove select of undefined symbol AC97
ALSA: hda/realtek - Enable Thinkpad Dock device for ALC298 platform
ALSA: hda/realtek - Add headset mode support for Dell laptop
ALSA: hda - Fix headset mic detection problem for two Dell machines
-----BEGIN PGP SIGNATURE-----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=+PbR
-----END PGP SIGNATURE-----
Merge tag 'drm-fixes-for-v4.16-rc2' of git://people.freedesktop.org/~airlied/linux
Pull drm fixes from Dave Airlie:
"One nouveau regression fix, one AMD quirk and a full set of i915
fixes.
The i915 fixes are mostly for things caught by their CI system, main
ones being DSI panel fixes and GEM fixes"
* tag 'drm-fixes-for-v4.16-rc2' of git://people.freedesktop.org/~airlied/linux:
drm/nouveau: Make clock gate support conditional
drm/i915: Fix DSI panels with v1 MIPI sequences without a DEASSERT sequence v3
drm/i915: Free memdup-ed DSI VBT data structures on driver_unload
drm/i915: Add intel_bios_cleanup() function
drm/i915/vlv: Add cdclk workaround for DSI
drm/i915/gvt: fix one typo of render_mmio trace
drm/i915/gvt: Support BAR0 8-byte reads/writes
drm/i915/gvt: add 0xe4f0 into gen9 render list
drm/i915/pmu: Fix building without CONFIG_PM
drm/i915/pmu: Fix sleep under atomic in RC6 readout
drm/i915/pmu: Fix PMU enable vs execlists tasklet race
drm/i915: Lock out execlist tasklet while peeking inside for busy-stats
drm/i915/breadcrumbs: Ignore unsubmitted signalers
drm/i915: Don't wake the device up to check if the engine is asleep
drm/i915: Avoid truncation before clamping userspace's priority value
drm/i915/perf: Fix compiler warning for string truncation
drm/i915/perf: Fix compiler warning for string truncation
drm/amdgpu: add new device to use atpx quirk
This augments the DA9211 regulator driver to fetch its GPIO descriptors
directly from the device tree using the newly exported
devm_get_gpiod_from_child().
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
When setting up a fixed regulator on the DA9055, pass a descriptor
instead of a global GPIO number. This facility is not used in the
kernel so we can easily just say that this should be a descriptor
if/when put to use.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
We are currently passing a GPIO number from the global GPIO numberspace
into the regulator core for handling enable GPIOs. This is not good
since it ties into the global GPIO numberspace and uses gpio_to_desc()
to overcome this.
Start supporting passing an already initialized GPIO descriptor to the
core instead: leaf drivers pick their descriptors, associated directly
with the device node (or from ACPI or from a board descriptor table)
and use that directly without any roundtrip over the global GPIO
numberspace.
This looks messy since it adds a bunch of extra code in the core, but
at the end of the patch series we will delete the handling of the GPIO
number and only deal with descriptors so things end up neat.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Save 26 lines worth of Sparse complaints by fixing up this minor
mishap. The pointee lies in the __iomem space; the pointer does not.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Previously we called pci_probe_reset_function() in this path:
pci_sysfs_init # late_initcall
for_each_pci_dev(dev)
pci_create_sysfs_dev_files(dev)
pci_create_capabilities_sysfs(dev)
pci_probe_reset_function
pci_dev_specific_reset
pcie_has_flr
pcie_capability_read_dword
pci_sysfs_init() is a late_initcall, and a driver may have already claimed
one of these devices and enabled runtime power management for it, so the
device could already be in D3 by the time we get to pci_sysfs_init().
The device itself should respond to the config read even while it's in
D3hot, but if an upstream bridge is also in D3hot, the read won't even
reach the device because the bridge won't forward it downstream to the
device. If the bridge is a PCIe port, it should complete the read as an
Unsupported Request, which may be reported to the CPU as an exception or as
invalid data.
Avoid this case by probing for reset support from pci_init_capabilities(),
before a driver can claim the device. The device may be in D3hot, but any
bridges leading to it should be in D0, so the device's config space should
be fully accessible at that point.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Since commit 204f672255 ("staging: android: ion: Use CMA APIs directly")
the CMA API is now used directly and therefore the allocated memory is no
longer automatically zeroed.
Explicitly zero CMA allocated memory to ensure that no data is exposed to
userspace.
Fixes: 204f672255 ("staging: android: ion: Use CMA APIs directly")
Signed-off-by: Liam Mark <lmark@codeaurora.org>
Acked-by: Laura Abbott <labbott@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ashmem_pin_unpin() reads asma->file and asma->size before taking the
ashmem_mutex, so it can race with other operations that modify them.
Build-tested only.
Cc: stable@vger.kernel.org
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Selecting GENERIC_MSI_IRQ_DOMAIN on x86 causes a compile-time error in
some configurations:
drivers/base/platform-msi.c:37:19: error: field 'arg' has incomplete type
On the other architectures, we are fine, but here we should have an additional
dependency on X86_LOCAL_APIC so we can get the PCI_MSI_IRQ_DOMAIN symbol.
Cc: stable@vger.kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>