Commit graph

932,869 commits

Author SHA1 Message Date
Fabio Estevam
497b90db5e ARM: dts: imx28: Pass unit address and reg to IOMUX node
Pass unit address and reg to IOMUX node to fix the following build
warning with W=1:

arch/arm/boot/dts/imx28-apf28.dtb: Warning (simple_bus_reg): Node /apb@80000000/apbh@80000000/pinctrl@80018000/gpmi-status-cfg missing or empty reg/ranges property
arch/arm/boot/dts/imx28-apf28.dtb: Warning (simple_bus_reg): Node /apb@80000000/apbh@80000000/pinctrl@80018000/mmc0-cd-cfg missing or empty reg/ranges property
arch/arm/boot/dts/imx28-apf28.dtb: Warning (simple_bus_reg): Node /apb@80000000/apbh@80000000/pinctrl@80018000/mmc0-sck-cfg missing or empty reg/ranges property
arch/arm/boot/dts/imx28-apf28.dtb: Warning (simple_bus_reg): Node /apb@80000000/apbh@80000000/pinctrl@80018000/mmc1-cd-cfg missing or empty reg/ranges property
arch/arm/boot/dts/imx28-apf28.dtb: Warning (simple_bus_reg): Node /apb@80000000/apbh@80000000/pinctrl@80018000/mmc1-sck-cfg missing or empty reg/ranges property
arch/arm/boot/dts/imx28-apf28.dtb: Warning (simple_bus_reg): Node /apb@80000000/apbh@80000000/pinctrl@80018000/mmc2-cd-cfg missing or empty reg/ranges property

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-02-12 21:12:55 +08:00
Fabio Estevam
74aeda3557 ARM: dts: imx23: Pass unit address and reg to IOMUX node
Pass unit address and reg to IOMUX node to fix the following build
warning with W=1:

arch/arm/boot/dts/imx23-evk.dtb: Warning (simple_bus_reg): Node /apb@80000000/apbh@80000000/pinctrl@80018000/gpmi-pins-fixup missing or empty reg/ranges property
arch/arm/boot/dts/imx23-evk.dtb: Warning (simple_bus_reg): Node /apb@80000000/apbh@80000000/pinctrl@80018000/mmc0-pins-fixup missing or empty reg/ranges property

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-02-12 21:12:54 +08:00
Rasmus Villemoes
35090321a2 ARM: dts: ls1021a: add nodes for on-chip ram
Although the two nodes constitute one contiguous 128K region, still
describe them separately:

- That's how they are described in the reference manual: "Each OCRAM
  occupies a 64 KB of address region...", and the names ocram1 and
  ocram2 are also as used in the manual.

- The two areas are treated differently by the boot ROM code: OCRAM2 is
  zero-initialized, while, again quoting the RM, "software must perform
  the zero initialization of OCRAM1."

Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-02-12 21:12:42 +08:00
Takashi Iwai
bafeca673f Merge branch 'topic/hda-sync-power' into for-next
Pull the HD-audio power sync fix.  This is shared with ASoC.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-02-12 14:01:23 +01:00
Abhijeet Kumar
3b5b899ca6 ALSA: hda: Make use of core codec functions to sync power state
Since sync_power_state is moved to core it's better to use the helper
function to ensure the actual power state reaches target instead of
using the local helper functions already exsisting in hda code.

Signed-off-by: Abhijeet Kumar <abhijeet.kumar@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-02-12 13:59:48 +01:00
Abhijeet Kumar
0978749253 ALSA: hda: Copying sync power state helper to core
The current sync_power_state is local to hda code, moving it
core so that other users apart from hda legacy can use it.
The helper function ensures the actual state reaches the target state.

Signed-off-by: Abhijeet Kumar <abhijeet.kumar@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-02-12 13:59:39 +01:00
Geert Uytterhoeven
fa3d4c67df arm64: dts: renesas: r8a77995: Remove non-existing STBE region
R-Car D3 does not have the Stream Buffer for EtherAVB-IF (STBE).

Note that the RAVB driver does not use this region.

Fixes: f9ba0c4cfe ("arm64: dts: renesas: r8a77995: Add EthernetAVB device node")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-02-12 13:52:09 +01:00
Geert Uytterhoeven
d0d2ad1ff6 arm64: dts: renesas: r8a77970: Remove non-existing STBE region
R-Car V3M does not have the Stream Buffer for EtherAVB-IF (STBE).

Note that the RAVB driver does not use this region.

Fixes: bea2ab136e ("arm64: dts: renesas: r8a77970: add EtherAVB support")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-02-12 13:52:08 +01:00
Sergei Shtylyov
00d3375f91 arm64: dts: renesas: r8a77980: add SYS-DMAC support
Describe SYS-DMAC1/2 in the R8A77980 device tree.

Based on the original (and large) patch by Vladimir Barinov.

Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com>
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-02-12 13:52:08 +01:00
Sergei Shtylyov
f3a54d6c17 arm64: dts: renesas: initial R8A77980 SoC device tree
The initial R8A77980 SoC device tree including Cortex-A53 CPU, GIC, timer,
CPG, RST, and SYSC.

Based on the original (and large) patch by Vladimir Barinov.

Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com>
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-02-12 13:52:08 +01:00
Sergei Shtylyov
b85e1f77d9 arm64: add Renesas R8A77980 support
Add a configuration option for the R-Car V3H (R8A77980) SoC.

Based on the original (and large) patch by Vladimir Barinov.

Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com>
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-02-12 13:52:08 +01:00
Ulrich Hecht
41337aa155 arm64: dts: renesas: draak: enable I2C controller 1
No devices to add, I2C1 has an external connector only.

Signed-off-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-02-12 13:52:08 +01:00
Ulrich Hecht
86e7a972ad arm64: dts: renesas: draak: enable I2C controller 0 and EEPROM
Enables EEPROM on I2C0 on the Draak board.

Signed-off-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-02-12 13:52:08 +01:00
Ulrich Hecht
ffcd060fd5 arm64: dts: renesas: r8a77995: add I2C support
Defines R-Car D3 I2C controllers 0-3.

Signed-off-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-02-12 13:52:08 +01:00
Niklas Söderlund
a052d934a4 arm64: dts: renesas: r8a7796: update register size for thermal
To be able to read fused calibration values from hardware the size of
the register resource of TSC1 needs to be incremented to cover one more
register which holds the information if the calibration values have been
fused or not.

Instead of increasing TSC1 size to the value from the datasheet update
all TSC's size to the smallest granularity of the address decoder
circuitry.

Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-02-12 13:52:08 +01:00
Niklas Söderlund
cd8325dc19 arm64: dts: renesas: r8a7795: update register size for thermal
To be able to read fused calibration values from hardware the size of
the register resource of TSC1 needs to be incremented to cover one more
register which holds the information if the calibration values have been
fused or not.

Instead of increasing TSC1 size to the value from the datasheet update
all TSC's size to the smallest granularity of the address decoder
circuitry

Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-02-12 13:52:08 +01:00
Simon Horman
f320eead5d arm64: dts: renesas: r8a77995: move nodes which have no reg property out of bus
Move pmu_a53 and timer nodes from soc node to root node.  The nodes that
have been moved do not have any register properties and thus shouldn't be
placed on the bus.

This problem is flagged by the compiler as follows:
$ make W=1
...
arch/arm64/boot/dts/renesas/r8a77995-draak.dtb: Warning (simple_bus_reg): Node /soc/timer missing or empty reg/ranges property
arch/arm64/boot/dts/renesas/r8a77995-draak.dtb: Warning (simple_bus_reg): Node /soc/pmu_a53 missing or empty reg/ranges property

Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-02-12 13:52:08 +01:00
Simon Horman
7569d1ee01 arm64: dts: renesas: r8a77970: move node which has no reg property out of bus
Move timer node from soc node to root node.  The node that have been moved
do not have any register properties and thus shouldn't be placed on the
bus.

This problem is flagged by the compiler as follows:
$ make W=1
...
  DTC     arch/arm64/boot/dts/renesas/r8a77970-eagle.dtb
arch/arm64/boot/dts/renesas/r8a77970-eagle.dtb: Warning (simple_bus_reg): Node /soc/timer missing or empty reg/ranges property
  DTC     arch/arm64/boot/dts/renesas/r8a77970-v3msk.dtb
arch/arm64/boot/dts/renesas/r8a77970-v3msk.dtb: Warning (simple_bus_reg): Node /soc/timer missing or empty reg/ranges property

Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-02-12 13:52:08 +01:00
Wolfram Sang
ece30287af arm64: dts: renesas: salvator-common: add GPIO extender
We need to configure its GPIOs later.

Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-02-12 13:52:08 +01:00
Niklas Söderlund
0c38c54ef9 arm64: dts: renesas: r8a7795: add thermal cooling management
Add nodes and properties for thermal cooling management support.

Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Acked-by: Eduardo Valentin <edubezval@gmail.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-02-12 13:52:08 +01:00
Niklas Söderlund
479e5d70a9 arm64: dts: renesas: r8a7796: add thermal cooling management
Add nodes and properties for thermal cooling management support.

Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Acked-by: Eduardo Valentin <edubezval@gmail.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-02-12 13:52:08 +01:00
Dien Pham
da7e311334 arm64: dts: renesas: r8a7796: Add OPPs table for cpu devices
Define OOP tables for all CPUs.
This allows CPUFreq to function.

Based in part on work by Hien Dang.

Signed-off-by: Dien Pham <dien.pham.ry@rvc.renesas.com>
Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
2018-02-12 13:52:08 +01:00
Dien Pham
dd149e851a arm64: dts: renesas: r8a7795: Add OPPs table for cpu devices
Define OOP tables for all CPUs.
This allows CPUFreq to function.

Based in part on work by Hien Dang.

Signed-off-by: Dien Pham <dien.pham.ry@rvc.renesas.com>
Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
2018-02-12 13:52:07 +01:00
Simon Horman
1c6c924a49 arm64: dts: renesas: r8a7795: move scif node into alphabetical order
Move scif node so that sub-nodes of the root node are in
alphabetical order.

Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
2018-02-12 13:52:07 +01:00
Simon Horman
9ab5977d47 arm64: defconfig: enable R8A77980 SoC
Enable the Renesas R-Car V3H (R8A77980) SoC in the ARM64 defconfig.

Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
2018-02-12 13:51:42 +01:00
Sergei Shtylyov
f15092f848 dt-bindings: arm: document R8A77980 SoC bindings
Document the R-Car V3H (R8A77980) SoC device tree bindings.

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-02-12 13:51:27 +01:00
Wolfram Sang
931bc7ec2d ARM: dts: gose: use demuxer for I2C4
Make it possible to fallback to GPIO for I2C4 on the EXIO-E connector.

This is based on reference work for the I2C0 core of the lager/r8a7790
by Wolfram Sang.

Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
[wsa: rebased, corrected board name in subject, fixed aliases, switched
to named GPIOs, fixed pinmux for I2C4]
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
2018-02-12 13:50:59 +01:00
Wolfram Sang
786ef2eeb0 ARM: dts: gose: use demuxer for I2C2
Create a separate bus for HDMI related I2C2 and provide fallback to GPIO.

Based on work for the r8a7790/lager by Wolfram Sang.

Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
[wsa: rebased, corrected board name in subject, fixed aliases, switched
to named GPIOs]
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
2018-02-12 13:50:59 +01:00
Wolfram Sang
d4c1ce2813 ARM: dts: silk: use demuxer for I2C1
Create a separate bus for HDMI related I2C1 and provide fallback to GPIO.

Based on work for the r8a7790/lager by Wolfram Sang.

Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
[wsa: rebased, fixed aliases, switched to named GPIOs]
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
2018-02-12 13:50:59 +01:00
Wolfram Sang
61866d7fdc ARM: dts: alt: use demuxer for I2C1
Create a separate bus for HDMI related I2C1 and provide fallback to GPIO.

Based on work for the r8a7790/lager by Wolfram Sang.

Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
[wsa: rebased, fixed aliases, switched to named GPIOs]
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
2018-02-12 13:50:59 +01:00
Wolfram Sang
12937bffd6 ARM: dts: porter: use demuxer for I2C2
Create a separate bus for HDMI related I2C2 and provide fallback to GPIO.

Based on work for the r8a7790/lager by Wolfram Sang.

Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
[wsa: rebased, fixed aliases, switched to named GPIOs]
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
2018-02-12 13:50:58 +01:00
Wolfram Sang
be93275c4d ARM: dts: koelsch: use demuxer for I2C4
Make it possible to fallback to GPIO for I2C4 on the EXIO-E connector.

This is based on reference work for the I2C0 core of the lager/r8a7790
by Wolfram Sang.

Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
[wsa: rebased, fixed aliases, switched to named GPIOS, fixed pinmux for I2C4]
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
2018-02-12 13:50:58 +01:00
Wolfram Sang
168a709994 ARM: dts: koelsch: use demuxer for I2C2
Create a separate bus for HDMI related I2C2 and provide fallback to GPIO.

Based on work for the r8a7790/lager by Wolfram Sang.

Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
[wsa: rebased, fixed aliases, switched to named GPIOs, sorted by SCL
pins]
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
2018-02-12 13:50:58 +01:00
Wolfram Sang
e6081b21a1 ARM: dts: lager: use demuxer for IIC3/I2C3
Create a separate bus for da9063 PMIC and da9210 regulator
related I2C slaves.

Based on similar work for HDMI by Wolfram Sang.

Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
[wsa: rebased, corrected chip name in commit msg, updated aliases]
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
2018-02-12 13:50:58 +01:00
Wolfram Sang
4e65e1b672 ARM: dts: lager: use demuxer for IIC2/I2C2
Create a separate bus for HDMI related I2C slaves.

Based on work by Wolfram Sang.

Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
[wsa: rebased, removed typo in comment, fixed aliases, switched to
named GPIOS, sort SCL pins first]
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
2018-02-12 13:50:58 +01:00
Biju Das
76a2577d97 ARM: dts: r8a7745: Add VSP support
Add VSP support to SoC DT.

Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Reviewed-by: Chris Paterson <chris.paterson2@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-02-12 13:50:58 +01:00
Biju Das
0565605aa9 ARM: dts: r8a7743: Add VSP support
Add VSP support to SoC DT.

Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Reviewed-by: Chris Paterson <chris.paterson2@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-02-12 13:50:58 +01:00
Biju Das
0dcba3de58 ARM: dts: r8a7745: Add IPMMU DT nodes
Add the six IPMMU instances found in the r8a7745 to DT with a disabled
status.

Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Reviewed-by: Chris Paterson <chris.paterson2@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-02-12 13:50:58 +01:00
Biju Das
bbb44da0b5 ARM: dts: r8a7743: Add IPMMU DT nodes
Add the six IPMMU instances found in the r8a7743 to DT with a disabled
status.

Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Reviewed-by: Chris Paterson <chris.paterson2@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-02-12 13:50:58 +01:00
Simon Horman
28c07001db ARM: dts: r8a7745: sort subnodes of soc node
Sort the subnodes of the soc node to improve maintainability.
The sort key is the address on the bus with instances of the same
IP block grouped together and sorted alphabetically.

Minor whitespace and line-wrapping changes are also made
to match the formatting of R-Car Gen2 SoCs.

This patch should not introduce any functional change.

Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
2018-02-12 13:50:58 +01:00
Simon Horman
8eccafe92d ARM: dts: r8a7743: sort subnodes of soc node
Sort the subnodes of the soc node to improve maintainability.
The sort key is the address on the bus with instances of the same
IP block grouped together and sorted alphabetically.

Minor whitespace and line-wrapping changes are also made
to match the formatting of R-Car Gen2 SoCs.

This patch should not introduce any functional change.

Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
2018-02-12 13:50:58 +01:00
Simon Horman
77b1e3d230 ARM: dts: r8a7793: consistently use single space before =
Consistently use a single space before a =.

This patch fixes instances where a tab is used instead.

This patch should not introduce any functional change.

Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
2018-02-12 13:50:58 +01:00
Simon Horman
c57c1b7ce8 ARM: dts: r8a7791: consistently use single space before =
Consistently use a single space before a =.

This patch fixes instances where a tab is used instead.

This patch should not introduce any functional change.

Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
2018-02-12 13:50:58 +01:00
Simon Horman
5a63226206 ARM: dts: r8a7790: consistently use single space before =
Consistently use a single space before a =.

This patch fixes instances where a tab is used instead.

This patch should not introduce any functional change.

Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
2018-02-12 13:50:58 +01:00
Simon Horman
807eeaf95e ARM: dts: r8a7794: sort subnodes of root node
Sort the subnodes of the soc node to improve maintainability.
The sort key is the address on the bus with instances of the same
IP block grouped together.

Also re-align comment of audio_clka to match other R-Car SoCs.

This patch should not introduce any functional change.

Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
2018-02-12 13:50:58 +01:00
Simon Horman
f217f7bbb0 ARM: dts: r8a7794: sort subnodes of soc node
Sort the subnodes of the soc node to improve maintainability.
The sort key is the address on the bus with instances of the same
IP block grouped together.

This patch should not introduce any functional change.

Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
2018-02-12 13:50:58 +01:00
Simon Horman
0f2901d74a ARM: dts: r8a7794: add soc node
Add soc node to represent the bus and move all nodes with a base address
into this node. This is consistent with handling of R-Car Gen3, RZ/G1, and
R-Car V2H (R8A77920) SoCs upstream. It is intended to migrate other R-Car
Gen2 SoCs to this scheme.

The ordering is derived from simply moving each node with an address up to
before any nodes without a base address that occur before the soc node.  To
improve maintainability follow-up patches will sort subnodes of both the
new soc node and the root node.

This patch should not introduce any functional change.

Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
2018-02-12 13:50:57 +01:00
Simon Horman
b190cce35f ARM: dts: r8a7794: consistently use single space after =
Consistently use a single space after a =.

This patch removes instances where a tab is used instead.

This patch should not introduce any functional change.

Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
2018-02-12 13:50:57 +01:00
Simon Horman
ac24c5e522 ARM: dts: r8a7793: sort subnodes of root node
Sort the subnodes of the soc node to improve maintainability.
The sort key is the address on the bus with instances of the same
IP block grouped together.

This patch should not introduce any functional change.

Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
2018-02-12 13:50:57 +01:00
Simon Horman
40ed6d16cf ARM: dts: r8a7793: sort subnodes of soc node
Sort the subnodes of the soc node to improve maintainability.
The sort key is the address on the bus with instances of the same
IP block grouped together.

This patch should not introduce any functional change.

Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
2018-02-12 13:50:57 +01:00