Commit graph

932,869 commits

Author SHA1 Message Date
Ursula Braun
610db66f37 net/smc: do not reuse a linkgroup with setup problems
Once a linkgroup is created successfully, it stays alive for a
certain time to service more connections potentially created.
If one of the initialization steps for a new linkgroup fails,
the linkgroup should not be reused by other connections following.

Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-25 16:10:42 -05:00
Ursula Braun
b4772b3a87 net/smc: terminate link group for ib_post_send problems
If ib_post_send() fails, terminate all connections of this
link group.

Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-25 16:10:42 -05:00
Ursula Braun
5ac92a00aa net/smc: handle state SMC_PEERFINCLOSEWAIT correctly
A state transition from closing state SMC_PEERFINCLOSEWAIT to closing
state SMC_APPFINCLOSEWAIT is not allowed. Once a closing indication
from the peer has been received, the socket reaches state SMC_CLOSED.

And receiving a peer_conn_abort just changes the state of the socket
into one of the states SMC_PROCESSABORT or SMC_CLOSED;
sending a peer_conn_abort occurs in smc_close_active() for state
SMC_PROCESSABORT only.

Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-25 16:10:42 -05:00
Ursula Braun
611b63a127 net/smc: cancel tx worker in case of socket aborts
If an SMC socket is aborted, the tx worker should be cancelled.

Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-25 16:10:42 -05:00
David S. Miller
2611df7a79 Merge branch 'sfc-support-PTP-on-8000-and-X2000-series-NICs'
Edward Cree says:

====================
sfc: support PTP on 8000 and X2000 series NICs

Starting from the 8000-series (Medford 1), SFC NICs can timestamp TX packets
 sent through an ordinary DMA queue, rather than a special control-plane
 operation as in the 7000-series.  Patches 2-8 implement support for this.
The X2000-series (Medford 2) changes the format of timestamps, from seconds+
 (2^27)ths to seconds + quarter nanoseconds, as well as changing the shift
 of the frequency adjustment for increased precision.  Patches 9-12
 implement support for these changes.
Patch #1 is an unrelated fix for NAPI budget handling, needed in order for
 TX completion changes in the later patches to apply cleanly.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-25 16:05:15 -05:00
Laurence Evans
88a4fb5fce sfc: support Medford2 frequency adjustment format
Support increased precision frequency adjustment format (FP44) used
 by Medford2 adapters.

Signed-off-by: Laurence Evans <levans@solarflare.com>
Signed-off-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-25 16:05:15 -05:00
Edward Cree
1280c0f8aa sfc: support second + quarter ns time format for receive datapath
The time_format that we stash in the PTP data structure is never
 referenced, so we can remove it.  Instead, store the information needed
 to interpret sync event timestamps.
Also rolls in a couple of other related minor PTP fixes.

Based on patches by Bert Kenward <bkenward@solarflare.com> and Laurence
 Evans <levans@solarflare.com>.

Signed-off-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-25 16:05:15 -05:00
Laurence Evans
04796f4c4d sfc: support separate PTP and general timestamping
Support MC_CMD_PTP_OUT_GET_TIMESTAMP_CORRECTIONS_V2.  Extract general
 timestamp corrections in addition to PTP corrections.  Apply receive
 timestamp corrections for general datapath receive timestamping, and
 correspondingly for transmit.

Signed-off-by: Laurence Evans <levans@solarflare.com>
Signed-off-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-25 16:05:14 -05:00
Laurence Evans
c4f64fcc4d sfc: simplify RX datapath timestamping
Use timestamp conversion function with correction to avoid duplicate
 correction handling.

Signed-off-by: Laurence Evans <levans@solarflare.com>
Signed-off-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-25 16:05:14 -05:00
Martin Habets
6aa47c87cb sfc: only advertise TX timestamping if we have the license for it
We check the license for TX hardware timestamping capability.
The PTP probe will have enabled PTP sync events from the adapter.  If
 later, at TX queue init, it turns out we do not have the license, we
 don't need the sync events either.

Signed-off-by: Martin Habets <mhabets@solarflare.com>
Signed-off-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-25 16:05:14 -05:00
Edward Cree
2935e3c382 sfc: on 8000 series use TX queues for TX timestamps
For this we create and use one or more new TX queues on the PTP channel,
 and enable sync events for it.
Based on a patch by Martin Habets <mhabets@solarflare.com>.

Signed-off-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-25 16:05:14 -05:00
Martin Habets
c1d0d33946 sfc: MAC TX timestamp handling on the 8000 series
TX timestamps on 8000 series are supplied from the MAC. This timestamp is
 only 48 bits long. The high order bits from the last time sync event are
 used for the top 16 bits.

Signed-off-by: Martin Habets <mhabets@solarflare.com>
Signed-off-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-25 16:05:14 -05:00
Martin Habets
50663fe180 sfc: only enable TX timestamping if the adapter is licensed for it
If we try to enable the feature and do not have the license for it, the
 MCPU will refuse and fail our TX queue init.

Signed-off-by: Martin Habets <mhabets@solarflare.com>
Signed-off-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-25 16:05:14 -05:00
Martin Habets
23418dc131 sfc: use main datapath for HW timestamps if available
We can now transmit SKBs in 2 ways:
1. Via the MC (for the 7XXX series and earlier), using
   efx_ptp_xmit_skb_mc().
2. Via the TX queues on the dedicated PTP channel (8XXX series and later),
   using efx_ptp_xmit_skb_queue().
The PTP worker thread uses the method set up at probe time. It never
 checked the return code from the old efx_ptp_xmit_skb(), so it now
 returns void.
We increment the TX dropped counter of the device if the transmit fails.

As a result of the probe per channel the remove gets called multiple times.
 Clean up efx->ptp_data properly to avoid the 2nd call blowing up.

Signed-off-by: Martin Habets <mhabets@solarflare.com>
Signed-off-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-25 16:05:14 -05:00
Martin Habets
9c3afb33ae sfc: add function to determine which TX timestamping method to use
Use MC capability MC_CMD_GET_CAPABILITIES_V2_OUT_TX_MAC_TIMESTAMPING to
 detect whether the NIC supports timestamping packets sent out the main
 datapath.

Signed-off-by: Martin Habets <mhabets@solarflare.com>
Signed-off-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-25 16:05:14 -05:00
Martin Habets
b9b603d46d sfc: handle TX timestamps in the normal data path
Before this work, TX timestamping is done by sending each SKB to the MC.
On the 8000 series (Medford1) we have high speed timestamping via the
 MAC, which means we can use normal TX queues for this without a
 significant drop in bandwidth.  On the X2000 series (Medford2) support
 for transmitting via the MC is removed, so the new way must be used.

This patch enables timestamping on a TX queue, if requested.
It also enhances TX event handling to process the extra completion events,
 and puts the time in the SKB.

Signed-off-by: Martin Habets <mhabets@solarflare.com>
Signed-off-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-25 16:05:13 -05:00
Bert Kenward
5227ecccea sfc: remove tx and MCDI handling from NAPI budget consideration
The NAPI budget is only for RX processing work, not other work such as
 TX or MCDI completion handling.

Signed-off-by: Bert Kenward <bkenward@solarflare.com>
Signed-off-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-25 16:05:13 -05:00
Yunlei He
068c3cd858 f2fs: rebuild sit page from sit info in mem
This patch rebuild sit page from sit info in mem instead
of issue a read io.

I test this method and the result is as below:

Pre:
 mmc_perf_test-12061 [001] ...1   976.819992: f2fs_write_checkpoint: dev = (259,44), checkpoint for Sync, state = start flush sit
 mmc_perf_test-12061 [001] ...1   976.856446: f2fs_write_checkpoint: dev = (259,44), checkpoint for Sync, state = end flush sit
 mmc_perf_test-12061 [003] ...1   998.976946: f2fs_write_checkpoint: dev = (259,44), checkpoint for Sync, state = start flush sit
 mmc_perf_test-12061 [003] ...1   999.023269: f2fs_write_checkpoint: dev = (259,44), checkpoint for Sync, state = end flush sit
 mmc_perf_test-12061 [003] ...1  1022.060772: f2fs_write_checkpoint: dev = (259,44), checkpoint for Sync, state = start flush sit
 mmc_perf_test-12061 [003] ...1  1022.111034: f2fs_write_checkpoint: dev = (259,44), checkpoint for Sync, state = end flush sit
 mmc_perf_test-12061 [002] ...1  1070.127643: f2fs_write_checkpoint: dev = (259,44), checkpoint for Sync, state = start flush sit
 mmc_perf_test-12061 [003] ...1  1070.187352: f2fs_write_checkpoint: dev = (259,44), checkpoint for Sync, state = end flush sit
 mmc_perf_test-12061 [003] ...1  1095.942124: f2fs_write_checkpoint: dev = (259,44), checkpoint for Sync, state = start flush sit
 mmc_perf_test-12061 [003] ...1  1095.995975: f2fs_write_checkpoint: dev = (259,44), checkpoint for Sync, state = end flush sit
 mmc_perf_test-12061 [003] ...1  1122.535091: f2fs_write_checkpoint: dev = (259,44), checkpoint for Sync, state = start flush sit
 mmc_perf_test-12061 [003] ...1  1122.586521: f2fs_write_checkpoint: dev = (259,44), checkpoint for Sync, state = end flush sit
 mmc_perf_test-12061 [001] ...1  1147.897487: f2fs_write_checkpoint: dev = (259,44), checkpoint for Sync, state = start flush sit
 mmc_perf_test-12061 [001] ...1  1147.959438: f2fs_write_checkpoint: dev = (259,44), checkpoint for Sync, state = end flush sit
 mmc_perf_test-12061 [003] ...1  1177.926951: f2fs_write_checkpoint: dev = (259,44), checkpoint for Sync, state = start flush sit
 mmc_perf_test-12061 [002] ...1  1177.976823: f2fs_write_checkpoint: dev = (259,44), checkpoint for Sync, state = end flush sit
 mmc_perf_test-12061 [002] ...1  1204.176087: f2fs_write_checkpoint: dev = (259,44), checkpoint for Sync, state = start flush sit
 mmc_perf_test-12061 [002] ...1  1204.239046: f2fs_write_checkpoint: dev = (259,44), checkpoint for Sync, state = end flush sit

Some sit flush consume more than 50ms.

Now:
mmc_perf_test-2187  [007] ...1   196.840684: f2fs_write_checkpoint: dev = (259,44), checkpoint for Sync, state = start flush sit
mmc_perf_test-2187  [007] ...1   196.841258: f2fs_write_checkpoint: dev = (259,44), checkpoint for Sync, state = end flush sit
mmc_perf_test-2187  [007] ...1   219.430582: f2fs_write_checkpoint: dev = (259,44), checkpoint for Sync, state = start flush sit
mmc_perf_test-2187  [007] ...1   219.431144: f2fs_write_checkpoint: dev = (259,44), checkpoint for Sync, state = end flush sit
mmc_perf_test-2187  [002] ...1   243.638678: f2fs_write_checkpoint: dev = (259,44), checkpoint for Sync, state = start flush sit
mmc_perf_test-2187  [000] ...1   243.638980: f2fs_write_checkpoint: dev = (259,44), checkpoint for Sync, state = end flush sit
mmc_perf_test-2187  [002] ...1   265.392180: f2fs_write_checkpoint: dev = (259,44), checkpoint for Sync, state = start flush sit
mmc_perf_test-2187  [002] ...1   265.392245: f2fs_write_checkpoint: dev = (259,44), checkpoint for Sync, state = end flush sit
mmc_perf_test-2187  [000] ...1   290.309051: f2fs_write_checkpoint: dev = (259,44), checkpoint for Sync, state = start flush sit
mmc_perf_test-2187  [000] ...1   290.309116: f2fs_write_checkpoint: dev = (259,44), checkpoint for Sync, state = end flush sit
mmc_perf_test-2187  [003] ...1   317.144209: f2fs_write_checkpoint: dev = (259,44), checkpoint for Sync, state = start flush sit
mmc_perf_test-2187  [003] ...1   317.145913: f2fs_write_checkpoint: dev = (259,44), checkpoint for Sync, state = end flush sit
mmc_perf_test-2187  [005] ...1   343.224954: f2fs_write_checkpoint: dev = (259,44), checkpoint for Sync, state = start flush sit
mmc_perf_test-2187  [005] ...1   343.225574: f2fs_write_checkpoint: dev = (259,44), checkpoint for Sync, state = end flush sit
mmc_perf_test-2187  [000] ...1   370.239846: f2fs_write_checkpoint: dev = (259,44), checkpoint for Sync, state = start flush sit
mmc_perf_test-2187  [000] ...1   370.241138: f2fs_write_checkpoint: dev = (259,44), checkpoint for Sync, state = end flush sit
mmc_perf_test-2187  [001] ...1   397.029043: f2fs_write_checkpoint: dev = (259,44), checkpoint for Sync, state = start flush sit
mmc_perf_test-2187  [001] ...1   397.030750: f2fs_write_checkpoint: dev = (259,44), checkpoint for Sync, state = end flush sit
mmc_perf_test-2187  [003] ...1   425.386377: f2fs_write_checkpoint: dev = (259,44), checkpoint for Sync, state = start flush sit
mmc_perf_test-2187  [003] ...1   425.387735: f2fs_write_checkpoint: dev = (259,44), checkpoint for Sync, state = end flush sit

Most sit flush consume no more than 1ms.

Signed-off-by: Yunlei He <heyunlei@huawei.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-01-25 10:44:34 -08:00
Chao Yu
3b60d802d9 f2fs: stop issuing discard if fs is readonly
If filesystem is readonly, stop to issue discard in daemon.

Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-01-25 10:40:10 -08:00
Chao Yu
6819b884e0 f2fs: clean up duplicated assignment in init_discard_policy
Remove duplicated codes of assignment for .max_requests and .io_aware_gran.

Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-01-25 10:40:01 -08:00
Chao Yu
2882d34310 f2fs: use GFP_F2FS_ZERO for cleanup
Clean up codes with GFP_F2FS_ZERO, no logic changes.

Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-01-25 10:39:49 -08:00
Tony Lindgren
8146acff3b
ASoC: Fix twl4030 and 6040 regression by adding back read and write
Commit 3bb0f7c31b ("ASoC: don't use snd_soc_write/read on twl4030")
caused regressions for both twl4030 and twl6040 as it assumes the
ASoC driver is using regmap. As a side effect, this also causes a
considerable increase in idle power consumption omap3 boards using
twl4030 as the PMIC.

This is because the removal of read and write function pointers
causes some of the ASoC IO functions to not do anything. For example,
snd_soc_register_card() calls snd_soc_dapm_new_widgets() that calls
snd_soc_codec_drv_read() that now does nothing.

A long term solution suggested by Mark Brown <broonie@kernel.org>
is to make the twl drivers use regmap by adding a call to
snd_soc_codec_set_regmap(). This however needs more consideration
as currently the driver internal reads do caching and we would have
both regmap access and internal read/write access accessing the same
hardware registers.

So to fix the regression, let's just do a partial revert adding back
the read and write function pointers. Note that other non-regmap
ASoC drivers may need similar patches.

Fixes: 3bb0f7c31b ("ASoC: don't use snd_soc_write/read on twl4030")
Fixes: 93a00c467f ("ASoC: don't use snd_soc_write/read on twl6040")
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-25 18:20:26 +00:00
Mark Brown
0b5eca67bd
Merge branches 'topic/twl4030' and 'topic/twl6040' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into asoc-twl-breakage 2018-01-25 18:16:26 +00:00
Chris Wilson
09b1a4e4b5 drm/i915/lrc: Clear context restore/save inhibit flags for new contexts
CTX_CONTEXT_CONTROL (CTX_SR_CTL) operates as a masked register and so
will only apply the bits that are selected by the upper half. In the
case of selectively enabling sr inhibit, this may mean the context keeps
the current setting (so forgetting to save the context later, eventually
leading to a very upset GPU!).

Fixes: 517aaffe0c ("drm/i915/execlists: Inhibit context save/restore for the fake preempt context")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michal Winiarski <michal.winiarski@intel.com>
Cc: Michel Thierry <michel.thierry@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180125112443.12745-1-chris@chris-wilson.co.uk
Reviewed-by: Michel Thierry <michel.thierry@intel.com>
2018-01-25 18:04:25 +00:00
Max Gurtovoy
1dad3a67fb nvme-rdma: remove redundant boolean for inline_data
Signed-off-by: Max Gurtovoy <maxg@mellanox.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2018-01-25 18:41:40 +01:00
Johannes Thumshirn
6e49412016 nvme: don't free uuid pointer before printing it
Commit df351ef737 ("nvme-fabrics: fix memory leak when parsing host ID
option") fixed the leak of 'p' but in case uuid_parse() fails the memory
is freed before the error print that is using it.

Free it after printing eventual errors.

Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Fixes: df351ef737 ("nvme-fabrics: fix memory leak when parsing host ID option")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Max Gurtovoy <maxg@mellanox.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2018-01-25 18:41:39 +01:00
Kalle Valo
f7a611707b Merge ath-next from git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath.git
ath.git patches for 4.16. Major changes:

wil6210

* add PCI device id for Talyn

* support flashless device

ath9k

* improve RSSI/signal accuracy on AR9003 series
2018-01-25 19:39:07 +02:00
Ping-Ke Shih
f2f6026af7 rtlwifi: btcoex: Fix some static warnings from Sparse
Add 'static' or declaration to resolve the warnings, and remove two unused
functions halbtc_set_macreg() and halbtc_get_macreg() exposed when they
were made static.

Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Acked-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-01-25 19:33:34 +02:00
Linus Torvalds
6e20630e30 KVM fixes for v4.15(-rc10)
Fix races and potential use after free in the s390 cmma migration code.
 -----BEGIN PGP SIGNATURE-----
 
 iQEcBAABCAAGBQJaaghHAAoJEED/6hsPKofoJksIAJbpIR/Z6n1ycryT6G2iKmda
 QT8hYLanuOHNyEinu1AoikqP2bQRzqwuYzfzkECyaliJXKpmki86f8p+HOsNH1Ye
 db9vokkvWfyJBZ10d2JOLbGVDxQXX94bMgtO3aF6RcneYgalABOwQU4ltY5gnXXI
 5E8xU9d7ya1ivv5ADvPW8tv6GU9YMb5VB1EzM2owjQP3ks0/6p3jXT8XJJGhfufO
 6r6Y/E4HnxRKWXTDNoLU6b3sdpCDmMMBRO55AYE2eF/RA84glv9U+xnxs0fXJA8M
 OOWrtB4nxxcrCbSve38aONN5E5lSzjWl6/3t2ajbDeIV8r9Fh8Vh7MpeSY6oyZs=
 =i5NW
 -----END PGP SIGNATURE-----

Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm

Pull KVM fixes from Radim Krčmář:
 "Fix races and a potential use after free in the s390 cmma migration
  code"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: s390: add proper locking for CMMA migration bitmap
2018-01-25 09:32:10 -08:00
Bob Peterson
4519eaad72 GFS2: Fix minor comment typo
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
2018-01-25 10:18:06 -07:00
Linus Torvalds
525273fb2e for-4.15
-----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEE8rQSAMVO+zA4DBdWxWXV+ddtWDsFAlppIo8ACgkQxWXV+ddt
 WDuu9A//e29aPiicPrtIovNfVCzev774UddFBhIiEqyfbO0QvHk7Ld0d9+htR38W
 eAwxJG3gH4VS9yOFAyk/LrsjpQZYzP32wjGoIXQlz8J1SzxALlILLmjpYkZWHwZX
 UqAomYDnRjFu4jsHZ/AAyUNngYER8aeH+aO1PudppBiSCIVpk1TAVRnkt04gCJ7e
 CigFgMdRc8pT5P0T6Rsv2+W/yJC7sU0BgDIBjmUcnduqEAxRYl0zsJzpP0IYPPRa
 cAnpyu/ApK/m9mlLWi0SfUyNvePFWNxfA2QDBO5G6FwM6C2f5x/zBGfu29wAupVJ
 czdOSR5uqCd6WGZHfvaQ4cgQ69AE4lk68zijHRNESPa7tVZ9mQt713h2BqAX6Fus
 z+y45ti9CrFoOhaoXCSjUbpJZQ7YKWrat44Qi8pJaKGxqiqXpT8oVcBfjofu+Drn
 vnDrU+7WvST5TxcWw/JBWaFfft1dkbdKX+EYZW8sVJAmA/e0+aIfElsTuvdUQxuA
 aLnsyvsYQHVcA/mArD12sScQ13DDejR4ija8bP5tpmodxquUouwEAtKPoFnXVT6k
 8hbb6qPLsiBerRMSSuaNaFF/ESi36bsizH3O99bYyyxlR8bXi7irHZY9VPWc1OK3
 4twoDO0RhCxDHPY5mrIcKdlp9HiiUBPGos3BCaOAg8rKHd/QP7Q=
 =EOAu
 -----END PGP SIGNATURE-----

Merge tag 'for-4.15-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux

Pull btrfs fix from David Sterba:
 "It's been reported recently that readdir can list stale entries under
  some conditions. Fix it."

* tag 'for-4.15-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
  Btrfs: fix stale entries in readdir
2018-01-25 09:03:10 -08:00
Kirill Tkhai
fb07a820fe net: Move net:netns_ids destruction out of rtnl_lock() and document locking scheme
Currently, we unhash a dying net from netns_ids lists
under rtnl_lock(). It's a leftover from the time when
net::netns_ids was introduced. There was no net::nsid_lock,
and rtnl_lock() was mostly need to order modification
of alive nets nsid idr, i.e. for:
	for_each_net(tmp) {
		...
		id = __peernet2id(tmp, net);
		idr_remove(&tmp->netns_ids, id);
		...
	}

Since we have net::nsid_lock, the modifications are
protected by this local lock, and now we may introduce
better scheme of netns_ids destruction.

Let's look at the functions peernet2id_alloc() and
get_net_ns_by_id(). Previous commits taught these
functions to work well with dying net acquired from
rtnl unlocked lists. And they are the only functions
which can hash a net to netns_ids or obtain from there.
And as easy to check, other netns_ids operating functions
works with id, not with net pointers. So, we do not
need rtnl_lock to synchronize cleanup_net() with all them.

The another property, which is used in the patch,
is that net is unhashed from net_namespace_list
in the only place and by the only process. So,
we avoid excess rcu_read_lock() or rtnl_lock(),
when we'are iterating over the list in unhash_nsid().

All the above makes possible to keep rtnl_lock() locked
only for net->list deletion, and completely avoid it
for netns_ids unhashing and destruction. As these two
doings may take long time (e.g., memory allocation
to send skb), the patch should positively act on
the scalability and signify decrease the time, which
rtnl_lock() is held in cleanup_net().

Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-25 11:15:35 -05:00
Kalderon, Michal
dc728f779a RDMA/qedr: lower print level of flushed CQEs
There are races where can still get flush on CQEs before the QP enters
error state. This is not an error and should be treated as
debug information.

Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com>
Signed-off-by: Ariel Elior <Ariel.Elior@cavium.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-01-25 10:58:36 -05:00
Jason Gunthorpe
3624a8f025 RDMA/uverbs: Use an unambiguous errno for method not supported
Returning EOPNOTSUPP is problematic because it can also be
returned by the method function, and we use it in quite a few
places in drivers these days.

Instead, dedicate EPROTONOSUPPORT to indicate that the ioctl framework
is enabled but the requested object and method are not supported by
the kernel. No other case will return this code, and it lets userspace
know to fall back to write().

grep says we do not use it today in drivers/infiniband subsystem.

Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Reviewed-by: Matan Barak <matanb@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-01-25 10:57:29 -05:00
Dan Streetman
4ee806d511 net: tcp: close sock if net namespace is exiting
When a tcp socket is closed, if it detects that its net namespace is
exiting, close immediately and do not wait for FIN sequence.

For normal sockets, a reference is taken to their net namespace, so it will
never exit while the socket is open.  However, kernel sockets do not take a
reference to their net namespace, so it may begin exiting while the kernel
socket is still open.  In this case if the kernel socket is a tcp socket,
it will stay open trying to complete its close sequence.  The sock's dst(s)
hold a reference to their interface, which are all transferred to the
namespace's loopback interface when the real interfaces are taken down.
When the namespace tries to take down its loopback interface, it hangs
waiting for all references to the loopback interface to release, which
results in messages like:

unregister_netdevice: waiting for lo to become free. Usage count = 1

These messages continue until the socket finally times out and closes.
Since the net namespace cleanup holds the net_mutex while calling its
registered pernet callbacks, any new net namespace initialization is
blocked until the current net namespace finishes exiting.

After this change, the tcp socket notices the exiting net namespace, and
closes immediately, releasing its dst(s) and their reference to the
loopback interface, which lets the net namespace continue exiting.

Link: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1711407
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=97811
Signed-off-by: Dan Streetman <ddstreet@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-25 10:56:45 -05:00
Doug Ledford
f2fe3c4e09 MAINTAINERS: Fix the location of the rdma git repo
When Jason Gunthorpe and I became co-maintainers of the rdma tree, we
moved the official git repo location to a name neutral location.
However, that update did not make it here as well.  Fix that mistake.

Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-01-25 10:54:22 -05:00
Jia-Ju Bai
b3506c7ed2 ata: pata_pdc2027x: Replace mdelay with msleep
After checking all possible call chains to pdc_adjust_pll and
pdc_detect_pll_input_clock,
my tool finds that these functions are never called in atomic context,
namely never in an interrupt handler or holding a spinlock.
And their caller functions pdc2027x_init_one and pdc2027x_reinit_one
calls pci_enable_device which can sleep, and no spinlock is held when
calling pdc_adjust_pll and pdc_detect_pll_input_clock,
so it proves that pdc_adjust_pll and pdc_detect_pll_input_clock
can call functions which can sleep.
Thus mdelay can be replaced with msleep to avoid busy wait.

Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2018-01-25 07:28:31 -08:00
Jia-Ju Bai
eada8598e6 ata: pata_it821x: Replace mdelay with usleep_range in it821x_firmware_command
After checking all possible call chains to it821x_firmware_command here,
my tool finds that it821x_firmware_command
is never called in atomic context,
namely never in an interrupt handler or holding a spinlock.
And it821x_firmware_command calls kmalloc(GFP_KERNEL),
so it proves again that it821x_firmware_command
can call functions which can sleep.
Thus mdelay can be replaced with usleep_range to avoid busy wait.

This is found by a static analysis tool named DCNS written by myself.

Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2018-01-25 07:28:23 -08:00
Jia-Ju Bai
e72685dbd2 ata: sata_mv: Replace mdelay with usleep_range in mv_reset_channel
After checking all possible call chains to mv_reset_channel here,
my tool finds that mv_reset_channel is never called in atomic context,
namely never in an interrupt handler or holding a spinlock.
Thus mdelay can be replaced with usleep_range to avoid busy wait.

This is found by a static analysis tool named DCNS written by myself.

Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2018-01-25 07:28:13 -08:00
Keith Busch
ee9aebb27c nvme-pci: Suspend queues after deleting them
The driver had been abusing the cq_vector state to know if new submissions
were safe, but that was before we could quiesce blk-mq. If the controller
happens to get an interrupt through while we're suspending those queues,
'no irq handler' warnings may occur.

This patch will disable the interrupts only after the queues are deleted.

Reported-by: Jianchao Wang <jianchao.w.wang@oracle.com>
Tested-by: Jianchao Wang <jianchao.w.wang@oracle.com>
Signed-off-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2018-01-25 16:20:37 +01:00
Amrani, Ram
9ec1ddb80a MAINTAINERS: Remove Ram Amrani from Q-Logic RDMA driver
Remove myself from maintaining the qedr module as my period
of working with Cavium/Q-Logic has come to an end. I've had
a pleasure working with the community, cheers!

Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-01-25 10:20:36 -05:00
Leon Romanovsky
f97f43c9ed RDMA/srpt: Fix RCU debug build error
Combination of CONFIG_DEBUG_OBJECTS_RCU_HEAD=y and
CONFIG_INFINIBAND_SRPT=m produces the following build error.

ERROR: "init_rcu_head" [drivers/infiniband/ulp/srpt/ib_srpt.ko] undefined!
make[1]: *** [scripts/Makefile.modpost:92: __modpost] Error 1
make: *** [Makefile:1216: modules] Error 2

The reason to it that init_rcu_head() is not exported and not supposed
to be used in modules. It is needed for dynamic initialization of
statically allocated rcu_head structures.

Fixes: 795bc112cd ("IB/srpt: Make it safe to use RCU for srpt_device.rch_list")
Fixes: a11253142e ("IB/srpt: Rework multi-channel support")
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-01-25 10:17:01 -05:00
Christoph Hellwig
04f5653478 MAINTAINERS: add the iommu list for swiotlb and xen-swiotlb
All other discussions related to the dma mapping interfaces are on the
iommu list, so let's make it the official list for swiotlb and the
second list for xen-swiotlb.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2018-01-25 16:14:15 +01:00
Rob Herring
7e2978430f PCI: Make of_irq_parse_pci() static
Now that the DT PCI code is merged into drivers/pci, of_irq_parse_pci() can
be static.

Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: Frank Rowand <frowand.list@gmail.com>
2018-01-25 08:48:20 -06:00
Randy Dunlap
33f765f698 kdb: bl: don't use tab character in output
The "bl" (list breakpoints) command prints a '\t' (tab) character
in its output, but on a console (video device), that just prints
some odd graphics character. Instead of printing a tab character,
just align the output with spaces.

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Daniel Thompson <daniel.thompson@linaro.org>
Cc: Jason Wessel <jason.wessel@windriver.com>
Cc: kgdb-bugreport@lists.sourceforge.net
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
2018-01-25 08:41:22 -06:00
Randy Dunlap
b0f73bc7f1 kdb: drop newline in unknown command output
When an unknown command is entered, kdb prints "Unknown kdb command:"
and then the unknown text, including the newline character. This
causes the ending single-quote mark to be printed on the next line
by itself, so just change the ending newline character to a null
character (end of string) so that it won't be "printed."

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Daniel Thompson <daniel.thompson@linaro.org>
Cc: Jason Wessel <jason.wessel@windriver.com>
Cc: kgdb-bugreport@lists.sourceforge.net
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
2018-01-25 08:41:14 -06:00
Randy Dunlap
1e0ce03bf1 kdb: make "mdr" command repeat
The "mdr" command should repeat (continue) when only Enter/Return
is pressed, so make it do so.

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Daniel Thompson <daniel.thompson@linaro.org>
Cc: Jason Wessel <jason.wessel@windriver.com>
Cc: kgdb-bugreport@lists.sourceforge.net
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
2018-01-25 08:41:07 -06:00
Arnd Bergmann
6909e29fde kdb: use __ktime_get_real_seconds instead of __current_kernel_time
kdb is the only user of the __current_kernel_time() interface, which is
not y2038 safe and should be removed at some point.

The kdb code also goes to great lengths to print the time in a
human-readable format from 'struct timespec', again using a non-y2038-safe
re-implementation of the generic time_to_tm() code.

Using __current_kernel_time() here is necessary since the regular
accessors that require a sequence lock might hang when called during the
xtime update. However, this is safe in the particular case since kdb is
only interested in the tv_sec field that is updated atomically.

In order to make this y2038-safe, I'm converting the code to the generic
time64_to_tm helper, but that introduces the problem that we have no
interface like __current_kernel_time() that provides a 64-bit timestamp
in a lockless, safe and architecture-independent way. I have multiple
ideas for how to solve that:

- __ktime_get_real_seconds() is lockless, but can return
  incorrect results on 32-bit architectures in the special case that
  we are in the process of changing the time across the epoch, either
  during the timer tick that overflows the seconds in 2038, or while
  calling settimeofday.

- ktime_get_real_fast_ns() would work in this context, but does
  require a call into the clocksource driver to return a high-resolution
  timestamp. This may have undesired side-effects in the debugger,
  since we want to limit the interactions with the rest of the kernel.

- Adding a ktime_get_real_fast_seconds() based on tk_fast_mono
  plus tkr->base_real without the tk_clock_read() delta. Not sure about
  the value of adding yet another interface here.

- Changing the existing ktime_get_real_seconds() to use
  tk_fast_mono on 32-bit architectures rather than xtime_sec.  I think
  this could work, but am not entirely sure if this is an improvement.

I picked the first of those for simplicity here. It's technically
not correct but probably good enough as the time is only used for the
debugging output and the race will likely never be hit in practice.
Another downside is having to move the declaration into a public header
file.

Let me know if anyone has a different preference.

Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patchwork.kernel.org/patch/9775309/
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
2018-01-25 08:40:18 -06:00
Daniel Thompson
0296c248b4 misc: kgdbts: Display progress of asynchronous tests
kgdbts includes a couple of different "thrashing" style tests that
may have long runtimes (especially on simulated platforms) and which
run asynchronously. This is uncomfortable for interactive use and
makes setting timeouts tricky for automatic use.

Fix by providing a optional means to show progress during these tests.
Selecting 100 is somewhat arbitrary but it matches the step used on
the synchronous tests, is large enough to keep the call to printk
from invalidating the testing and is human enough to "feel about
right".

Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
2018-01-25 08:40:17 -06:00
Alexey Khoroshilov
2d55807b7f crypto: picoxcell - Fix error handling in spacc_probe()
If clk_get() fails, device_remove_file() looks inappropriate.

The error path, where all crypto_register fail, misses resource
deallocations.

Found by Linux Driver Verification project (linuxtesting.org).

Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Reviewed-by: Jamie Iles <jamie@jamieiles.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-01-26 01:10:36 +11:00