Commit graph

932,869 commits

Author SHA1 Message Date
Max R. P. Grossmann
a9445e47d8 posix-cpu-timers: Make set_process_cpu_timer() more robust
Because the return value of cpu_timer_sample_group() is not checked,
compilers and static checkers can legitimately warn about a potential use
of the uninitialized variable 'now'. This is not a runtime issue as all call
sites hand in valid clock ids.

Also cpu_timer_sample_group() is invoked unconditionally even when the
result is not used because *oldval is NULL.

Make the invocation conditional and check the return value.

[ tglx: Massage changelog ]

Signed-off-by: Max R. P. Grossmann <m@max.pm>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: john.stultz@linaro.org
Link: https://lkml.kernel.org/r/20180108190157.10048-1-m@max.pm
2018-01-14 20:50:59 +01:00
Peter Zijlstra
aa83c45762 x86/tsc: Introduce early tsc clocksource
Without TSC_KNOWN_FREQ the TSC clocksource is registered so late that the
kernel first switches to the HPET. Using HPET on large CPU count machines is
undesirable.

Therefore register a tsc-early clocksource using the preliminary tsc_khz
from quick calibration. Then when the final TSC calibration is done, it
can switch to the tuned frequency.

The only notably problem is that the real tsc clocksource must be marked
with CLOCK_SOURCE_VALID_FOR_HRES, otherwise it will not be selected when
unregistering tsc-early. tsc-early cannot be left registered, because then
the clocksource code would fall back to it when we tsc clocksource is
marked unstable later.

Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: len.brown@intel.com
Cc: rui.zhang@intel.com
Cc: Len Brown <lenb@kernel.org>
Link: https://lkml.kernel.org/r/20171222092243.431585460@infradead.org
2018-01-14 20:18:23 +01:00
Peter Zijlstra
6d671e1b85 x86/time: Unconditionally register legacy timer interrupt
Even without a PIC/PIT the legacy timer interrupt is required for HPET in
legacy replacement mode.

Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: len.brown@intel.com
Cc: rui.zhang@intel.com
Link: https://lkml.kernel.org/r/20171222092243.382623763@infradead.org
2018-01-14 20:18:23 +01:00
Peter Zijlstra
30c7e5b123 x86/tsc: Allow TSC calibration without PIT
Zhang Rui reported that a Surface Pro 4 will fail to boot with
lapic=notscdeadline. Part of the problem is that that machine doesn't have
a PIT.

If, for some reason, the TSC init has to fall back to TSC calibration, it
relies on the PIT to be present.

Allow TSC calibration to reliably fall back to HPET.

The below results in an accurate TSC measurement when forced on a IVB:

  tsc: Unable to calibrate against PIT
  tsc: No reference (HPET/PMTIMER) available
  tsc: Unable to calibrate against PIT
  tsc: using HPET reference calibration
  tsc: Detected 2792.451 MHz processor

Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: len.brown@intel.com
Cc: rui.zhang@intel.com
Link: https://lkml.kernel.org/r/20171222092243.333145937@infradead.org
2018-01-14 20:18:23 +01:00
Andi Kleen
327867faa4 x86/idt: Mark IDT tables __initconst
const variables must use __initconst, not __initdata.

Fix this up for the IDT tables, which got it consistently wrong.

Fixes: 16bc18d895 ("x86/idt: Move 32-bit idt_descr to C code")
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20171222001821.2157-7-andi@firstfloor.org
2018-01-14 20:09:45 +01:00
Andi Kleen
80a3e3949b x86/extable: Mark exception handler functions visible
Mark the C exception handler functions that are directly called through
exception tables visible. LTO needs to know they are accessed from assembler.

[ tglx: Mopped up the wrecked argument alignment. Sigh.... ]

Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20171222001821.2157-6-andi@firstfloor.org
2018-01-14 20:04:16 +01:00
Andi Kleen
7cf1aaa2ad x86/timer: Don't inline __const_udelay
__const_udelay is marked inline, and LTO will happily inline it everywhere

Dropping the inline saves ~44k text in a LTO build.

13999560        1740864 1499136 17239560        1070e08 vmlinux-with-udelay-inline
13954764        1736768 1499136 17190668        1064f0c vmlinux-wo-udelay-inline

Inlining it has no advantage in general, so its the right thing to do.

Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20171222001821.2157-2-andi@firstfloor.org
2018-01-14 20:03:49 +01:00
Stephen Boyd
bb48711800 arm64: cpu_errata: Add Kryo to Falkor 1003 errata
The Kryo CPUs are also affected by the Falkor 1003 errata, so
we need to do the same workaround on Kryo CPUs. The MIDR is
slightly more complicated here, where the PART number is not
always the same when looking at all the bits from 15 to 4. Drop
the lower 8 bits and just look at the top 4 to see if it's '2'
and then consider those as Kryo CPUs. This covers all the
combinations without having to list them all out.

Fixes: 38fd94b027 ("arm64: Work around Falkor erratum 1003")
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2018-01-14 18:49:52 +00:00
Steve Capper
0370b31e48 arm64: Extend early page table code to allow for larger kernels
Currently the early assembler page table code assumes that precisely
1xpgd, 1xpud, 1xpmd are sufficient to represent the early kernel text
mappings.

Unfortunately this is rarely the case when running with a 16KB granule,
and we also run into limits with 4KB granule when building much larger
kernels.

This patch re-writes the early page table logic to compute indices of
mappings for each level of page table, and if multiple indices are
required, the next-level page table is scaled up accordingly.

Also the required size of the swapper_pg_dir is computed at link time
to cover the mapping [KIMAGE_ADDR + VOFFSET, _end]. When KASLR is
enabled, an extra page is set aside for each level that may require extra
entries at runtime.

Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Steve Capper <steve.capper@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2018-01-14 18:49:52 +00:00
Steve Capper
1e1b8c04fa arm64: entry: Move the trampoline to be before PAN
The trampoline page tables are positioned after the early page tables in
the kernel linker script.

As we are about to change the early page table logic to resolve the
swapper size at link time as opposed to compile time, the
SWAPPER_DIR_SIZE variable (currently used to locate the trampline)
will be rendered unsuitable for low level assembler.

This patch solves this issue by moving the trampoline before the PAN
page tables. The offset to the trampoline from ttbr1 can then be
expressed by: PAGE_SIZE + RESERVED_TTBR0_SIZE, which is available to the
entry assembler.

Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Steve Capper <steve.capper@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2018-01-14 18:49:51 +00:00
Steve Capper
9dfe4828aa arm64: Re-order reserved_ttbr0 in linker script
Currently one resolves the location of the reserved_ttbr0 for PAN by
taking a positive offset from swapper_pg_dir. In a future patch we wish
to extend the swapper s.t. its size is determined at link time rather
than comile time, rendering SWAPPER_DIR_SIZE unsuitable for such a low
level calculation.

In this patch we re-arrange the order of the linker script s.t. instead
one computes reserved_ttbr0 by subtracting RESERVED_TTBR0_SIZE from
swapper_pg_dir.

Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Steve Capper <steve.capper@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2018-01-14 18:49:51 +00:00
James Morse
79e9aa59dc arm64: sdei: Add trampoline code for remapping the kernel
When CONFIG_UNMAP_KERNEL_AT_EL0 is set the SDEI entry point and the rest
of the kernel may be unmapped when we take an event. If this may be the
case, use an entry trampoline that can switch to the kernel page tables.

We can't use the provided PSTATE to determine whether to switch page
tables as we may have interrupted the kernel's entry trampoline, (or a
normal-priority event that interrupted the kernel's entry trampoline).
Instead test for a user ASID in ttbr1_el1.

Save a value in regs->addr_limit to indicate whether we need to restore
the original ASID when returning from this event. This value is only used
by do_page_fault(), which we don't call with the SDEI regs.

Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2018-01-14 18:49:50 +00:00
James Morse
83f8ee3a73 arm64: mmu: add the entry trampolines start/end section markers into sections.h
SDEI needs to calculate an offset in the trampoline page too. Move
the extern char[] to sections.h.

This patch just moves code around.

Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2018-01-14 18:49:50 +00:00
James Morse
677a60bd20 firmware: arm_sdei: Discover SDEI support via ACPI
SDEI defines a new ACPI table to indicate the presence of the interface.
The conduit is discovered in the same way as PSCI.

For ACPI we need to create the platform device ourselves as SDEI doesn't
have an entry in the DSDT.

The SDEI platform device should be created after ACPI has been initialised
so that we can parse the table, but before GHES devices are created, which
may register SDE events if they use SDEI as their notification type.

Reviewed-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: James Morse <james.morse@arm.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2018-01-14 18:49:49 +00:00
James Morse
fa31ab77ce arm64: acpi: Remove __init from acpi_psci_use_hvc() for use by SDEI
SDEI inherits the 'use hvc' bit that is also used by PSCI. PSCI does all
its initialisation early, SDEI does its late.

Remove the __init annotation from acpi_psci_use_hvc().

Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: James Morse <james.morse@arm.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2018-01-14 18:49:49 +00:00
James Morse
f92b5462a2 firmware: arm_sdei: add support for CPU private events
Private SDE events are per-cpu, and need to be registered and enabled
on each CPU.

Hide this detail from the caller by adapting our {,un}register and
{en,dis}able calls to send an IPI to each CPU if the event is private.

CPU private events are unregistered when the CPU is powered-off, and
re-registered when the CPU is brought back online. This saves bringing
secondary cores back online to call private_reset() on shutdown, kexec
and resume from hibernate.

Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2018-01-14 18:49:48 +00:00
Linus Torvalds
9443c16850 Merge branch 'for-linus' of git://git.kernel.dk/linux-block
Pull NVMe fix from Jens Axboe:
 "Just a single fix for nvme over fabrics that should go into 4.15"

* 'for-linus' of git://git.kernel.dk/linux-block:
  nvme-fabrics: initialize default host->id in nvmf_host_default()
2018-01-14 10:22:45 -08:00
Li Jinyue
fbe0e839d1 futex: Prevent overflow by strengthen input validation
UBSAN reports signed integer overflow in kernel/futex.c:

 UBSAN: Undefined behaviour in kernel/futex.c:2041:18
 signed integer overflow:
 0 - -2147483648 cannot be represented in type 'int'

Add a sanity check to catch negative values of nr_wake and nr_requeue.

Signed-off-by: Li Jinyue <lijinyue@huawei.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: peterz@infradead.org
Cc: dvhart@infradead.org
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/1513242294-31786-1-git-send-email-lijinyue@huawei.com
2018-01-14 18:55:03 +01:00
Linus Torvalds
40548c6b6c Merge branch 'x86-pti-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 pti updates from Thomas Gleixner:
 "This contains:

   - a PTI bugfix to avoid setting reserved CR3 bits when PCID is
     disabled. This seems to cause issues on a virtual machine at least
     and is incorrect according to the AMD manual.

   - a PTI bugfix which disables the perf BTS facility if PTI is
     enabled. The BTS AUX buffer is not globally visible and causes the
     CPU to fault when the mapping disappears on switching CR3 to user
     space. A full fix which restores BTS on PTI is non trivial and will
     be worked on.

   - PTI bugfixes for EFI and trusted boot which make sure that the user
     space visible page table entries have the NX bit cleared

   - removal of dead code in the PTI pagetable setup functions

   - add PTI documentation

   - add a selftest for vsyscall to verify that the kernel actually
     implements what it advertises.

   - a sysfs interface to expose vulnerability and mitigation
     information so there is a coherent way for users to retrieve the
     status.

   - the initial spectre_v2 mitigations, aka retpoline:

      + The necessary ASM thunk and compiler support

      + The ASM variants of retpoline and the conversion of affected ASM
        code

      + Make LFENCE serializing on AMD so it can be used as speculation
        trap

      + The RSB fill after vmexit

   - initial objtool support for retpoline

  As I said in the status mail this is the most of the set of patches
  which should go into 4.15 except two straight forward patches still on
  hold:

   - the retpoline add on of LFENCE which waits for ACKs

   - the RSB fill after context switch

  Both should be ready to go early next week and with that we'll have
  covered the major holes of spectre_v2 and go back to normality"

* 'x86-pti-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (28 commits)
  x86,perf: Disable intel_bts when PTI
  security/Kconfig: Correct the Documentation reference for PTI
  x86/pti: Fix !PCID and sanitize defines
  selftests/x86: Add test_vsyscall
  x86/retpoline: Fill return stack buffer on vmexit
  x86/retpoline/irq32: Convert assembler indirect jumps
  x86/retpoline/checksum32: Convert assembler indirect jumps
  x86/retpoline/xen: Convert Xen hypercall indirect jumps
  x86/retpoline/hyperv: Convert assembler indirect jumps
  x86/retpoline/ftrace: Convert ftrace assembler indirect jumps
  x86/retpoline/entry: Convert entry assembler indirect jumps
  x86/retpoline/crypto: Convert crypto assembler indirect jumps
  x86/spectre: Add boot time option to select Spectre v2 mitigation
  x86/retpoline: Add initial retpoline support
  objtool: Allow alternatives to be ignored
  objtool: Detect jumps to retpoline thunks
  x86/pti: Make unpoison of pgd for trusted boot work for real
  x86/alternatives: Fix optimize_nops() checking
  sysfs/cpu: Fix typos in vulnerability documentation
  x86/cpu/AMD: Use LFENCE_RDTSC in preference to MFENCE_RDTSC
  ...
2018-01-14 09:51:25 -08:00
Peter Zijlstra
c1e2f0eaf0 futex: Avoid violating the 10th rule of futex
Julia reported futex state corruption in the following scenario:

   waiter                                  waker                                            stealer (prio > waiter)

   futex(WAIT_REQUEUE_PI, uaddr, uaddr2,
         timeout=[N ms])
      futex_wait_requeue_pi()
         futex_wait_queue_me()
            freezable_schedule()
            <scheduled out>
                                           futex(LOCK_PI, uaddr2)
                                           futex(CMP_REQUEUE_PI, uaddr,
                                                 uaddr2, 1, 0)
                                              /* requeues waiter to uaddr2 */
                                           futex(UNLOCK_PI, uaddr2)
                                                 wake_futex_pi()
                                                    cmp_futex_value_locked(uaddr2, waiter)
                                                    wake_up_q()
           <woken by waker>
           <hrtimer_wakeup() fires,
            clears sleeper->task>
                                                                                           futex(LOCK_PI, uaddr2)
                                                                                              __rt_mutex_start_proxy_lock()
                                                                                                 try_to_take_rt_mutex() /* steals lock */
                                                                                                    rt_mutex_set_owner(lock, stealer)
                                                                                              <preempted>
         <scheduled in>
         rt_mutex_wait_proxy_lock()
            __rt_mutex_slowlock()
               try_to_take_rt_mutex() /* fails, lock held by stealer */
               if (timeout && !timeout->task)
                  return -ETIMEDOUT;
            fixup_owner()
               /* lock wasn't acquired, so,
                  fixup_pi_state_owner skipped */

   return -ETIMEDOUT;

   /* At this point, we've returned -ETIMEDOUT to userspace, but the
    * futex word shows waiter to be the owner, and the pi_mutex has
    * stealer as the owner */

   futex_lock(LOCK_PI, uaddr2)
     -> bails with EDEADLK, futex word says we're owner.

And suggested that what commit:

  73d786bd04 ("futex: Rework inconsistent rt_mutex/futex_q state")

removes from fixup_owner() looks to be just what is needed. And indeed
it is -- I completely missed that requeue_pi could also result in this
case. So we need to restore that, except that subsequent patches, like
commit:

  16ffa12d74 ("futex: Pull rt_mutex_futex_unlock() out from under hb->lock")

changed all the locking rules. Even without that, the sequence:

-               if (rt_mutex_futex_trylock(&q->pi_state->pi_mutex)) {
-                       locked = 1;
-                       goto out;
-               }

-               raw_spin_lock_irq(&q->pi_state->pi_mutex.wait_lock);
-               owner = rt_mutex_owner(&q->pi_state->pi_mutex);
-               if (!owner)
-                       owner = rt_mutex_next_owner(&q->pi_state->pi_mutex);
-               raw_spin_unlock_irq(&q->pi_state->pi_mutex.wait_lock);
-               ret = fixup_pi_state_owner(uaddr, q, owner);

already suggests there were races; otherwise we'd never have to look
at next_owner.

So instead of doing 3 consecutive wait_lock sections with who knows
what races, we do it all in a single section. Additionally, the usage
of pi_state->owner in fixup_owner() was only safe because only the
rt_mutex owner would modify it, which this additional case wrecks.

Luckily the values can only change away and not to the value we're
testing, this means we can do a speculative test and double check once
we have the wait_lock.

Fixes: 73d786bd04 ("futex: Rework inconsistent rt_mutex/futex_q state")
Reported-by: Julia Cartwright <julia@ni.com>
Reported-by: Gratian Crisan <gratian.crisan@ni.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Julia Cartwright <julia@ni.com>
Tested-by: Gratian Crisan <gratian.crisan@ni.com>
Cc: Darren Hart <dvhart@infradead.org>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20171208124939.7livp7no2ov65rrc@hirez.programming.kicks-ass.net
2018-01-14 18:49:16 +01:00
Jens Axboe
bf9ae8c532 blk-mq: fix bad clear of RQF_MQ_INFLIGHT in blk_mq_ct_ctx_init()
A previous commit moved the clearing of rq->rq_flags later,
but we may have already set RQF_MQ_INFLIGHT when that happens.
Ensure that we correctly initialize rq->rq_flags to the
right value.

This is based on an original fix by Ming, just rewritten to not
require a conditional.

Fixes: 7c3fb70f03 ("block: rearrange a few request fields for better cache layout")
Reviewed-by:  Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-01-14 10:46:24 -07:00
David S. Miller
564737f981 Merge branch '10GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queue
Jeff Kirsher says:

====================
10GbE Intel Wired LAN Driver Updates 2018-01-12

This series contains updates to ixgbe, fm10k and net core.

Alex updates the driver to remove a duplicate MAC address check and
verifies that we have not run out of resources to configure a MAC rule
in our filter table.  Also do not assume that dev->num_tc was populated
and configured with the driver, since it can be configured via mqprio
without any hardware coordination.  Fixed the recording of stats for
MACVLAN in ixgbe and fm10k instead of recording the receive queue on
MACVLAN offloaded frames.  When handling a MACVLAN offload, we should
be stopping/starting traffic on our own queues instead of the upper
devices transmit queues.  Fixed possible race conditions with the
MACVLAN cleanup with the interface cleanup on shutdown.  With the
recent fixes to ixgbe, we can cap the number of queues regardless of
accel_priv being in use or not, since the actual number of queues are
being reported via real_num_tx_queues.

Tony fixes up the kernel documentation for ixgbe and ixgbevf to resolve
warnings when W=1 is used.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-14 12:25:04 -05:00
David S. Miller
5d498214af Merge branch 'mlxsw-Offload-PRIO-qdisc'
Jiri Pirko says:

====================
mlxsw: Offload PRIO qdisc

Nogah says:

Add an offload support for PRIO qdisc for mlxsw driver.
PRIO qdisc is being offloaded by using ndo_setup_tc. It has three
commands, to set or tune the qdisc, to remove it and to get its stats.

Like RED offloading, offloading this qdisc is not enforced on the driver
and determining its offload state is done in the dump action, when the
stats are being updated.
In the driver, offloading of PRIO is supported as root qdisc only. It
supports only priorities 0-7 (the range that is used by the current static
mapping of DSCP to skb prio and by 1:1 PCP values mapping) and up to 8
bands.

Patches 1-2 offload DSCP to priority mapping in the mlxsw_sp driver.
Patch 3 adds offload support for PRIO qdisc.
Patches 4-5 Add PRIO offload support in the mlxsw_sp driver.

---
v1->v2:
- Patch 1/5:
 - Rewrite patch msg
- Patch 3/5:
 - Send all the qstats in the replace command (and not just backlog)
- Patch 5/5:
 - Align with the changes from 3/5
 - Move backlog to the generic qdisc stats struct
 - Delete extra newline
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-14 12:21:12 -05:00
Nogah Frankel
93d8a4c1b5 mlxsw: spectrum: qdiscs: Support stats for PRIO qdisc
Support basic stats for PRIO qdisc, which includes tx packets and bytes
count, drops count and backlog size. The rest of the stats are irrelevant
for this qdisc offload.
Since backlog is not only incremental but reflecting momentary value, in
case of a qdisc that stops being offloaded but is not destroyed, backlog
value needs to be updated about the un-offloading.
For that reason an unoffload function is being added to the ops struct.

Signed-off-by: Nogah Frankel <nogahf@mellanox.com>
Reviewed-by: Yuval Mintz <yuvalm@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-14 12:21:12 -05:00
Nogah Frankel
46a3615be4 mlxsw: spectrum: qdiscs: Support PRIO qdisc offload
Add support for offloading PRIO qdisc as root qdisc.
The support is for up to 8 bands.
Routed packets priority is determined by the DSCP field with the default
translations. Bridged packets priority is determined by the PCP field, if
exist, otherwise it is set to 0.
Since both options have only priorities 0-7, higher priorities mapping are
being ignored.

Signed-off-by: Nogah Frankel <nogahf@mellanox.com>
Reviewed-by: Yuval Mintz <yuvalm@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-14 12:21:12 -05:00
Nogah Frankel
7fdb61b44c net: sch: prio: Add offload ability to PRIO qdisc
Add the ability to offload PRIO qdisc by using ndo_setup_tc.
There are three commands for PRIO offloading:
* TC_PRIO_REPLACE: handles set and tune
* TC_PRIO_DESTROY: handles qdisc destroy
* TC_PRIO_STATS: updates the qdiscs counters (given as reference)

Like RED qdisc, the indication of whether PRIO is being offloaded is being
set and updated as part of the dump function. It is so because the driver
could decide to offload or not based on the qdisc parent, which could
change without notifying the qdisc.

Signed-off-by: Nogah Frankel <nogahf@mellanox.com>
Reviewed-by: Yuval Mintz <yuvalm@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-14 12:21:11 -05:00
Yuval Mintz
48276a296a mlxsw: spectrum_router: Configure default routing priority
When routing ip packets, the kernel is setting the SKB's priority
based on the tos field of the packet.
Imitate this behavior in the mlxsw router, having the internal
switch priority of a routed packet determined according to its DS
field.

Signed-off-by: Yuval Mintz <yuvalm@mellanox.com>
Signed-off-by: Nogah Frankel <nogahf@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-14 12:21:11 -05:00
Yuval Mintz
ddb362ced1 mlxsw: reg: add rdpm register
Add rdpm definition - router DSCP to priority mapping register.
This register will be utilized later to align the default mapping between
packet DSCP and switch-priority to the kernel's mapping between
packet priority and skb priority.

This is the first non-bit indexed register where the entries are arranged
in descending order, i.e., entry at offset 0 matches configuration for
dscp[63]. As a result, the item's step is converted into a signed variable
to support descending arrays [where step would be negative].

Signed-off-by: Yuval Mintz <yuvalm@mellanox.com>
Signed-off-by: Nogah Frankel <nogahf@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-14 12:21:11 -05:00
David S. Miller
1988c79578 Merge branch 'dsa-mv88e6xxx-ATU-VTU-irq'
Andrew Lunn says:

====================
mv88e6xxx: ATU and VTU interrupts

Both the ATU and VTU of Mavell switches can generate interrupts when
violations occur.  Trap this interrupts and print what violation
occurred.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-14 12:08:45 -05:00
Andrew Lunn
62eb1162ec net: dsa: mv88e6xxx: Decode VTU problem interrupt
When there is a problem with the VTU, an interrupt can be
generated. Trap this interrupt and decode the registers to determine
what the problem was, then log the error.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-14 12:08:45 -05:00
Andrew Lunn
0977644c50 net: dsa: mv88e6xxx: Decode ATU problem interrupt
When there is a problem with the ATU, an interrupt can be
generated. Trap this interrupt and decode the registers to determine
what the problem was, then log the error.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-14 12:08:45 -05:00
Ido Schimmel
3743d88ab4 mlxsw: spectrum_router: Add support for IPv6 non-equal-cost multipath
Since commit eb789980d0 ("mlxsw: spectrum_router: Populate adjacency
entries according to weights") the driver includes support for
non-equal-cost multipath, but IPv4 nexthops were the only user.

Now that the kernel supports weighted IPv6 nexthops, we can extend the
driver to support it as well.

This is done by assigning each nexthop its configured weight, so that it
will be populated accordingly in the device's adjacency table. The
`weight` parameter is also taken into account when comparing nexthop
groups in order not to consolidate non-identical groups.

Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-14 12:06:15 -05:00
Eric Dumazet
c366287ebd bpf: fix divides by zero
Divides by zero are not nice, lets avoid them if possible.

Also do_div() seems not needed when dealing with 32bit operands,
but this seems a minor detail.

Fixes: bd4cf0ed33 ("net: filter: rework/optimize internal BPF interpreter's instruction set")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-01-14 09:03:43 -08:00
Arnd Bergmann
54f7bf7230 net: netsec: use dma_addr_t for storing dma address
On targets that have different sizes for phys_addr_t and dma_addr_t,
we get a type mismatch error:

drivers/net/ethernet/socionext/netsec.c: In function 'netsec_alloc_dring':
drivers/net/ethernet/socionext/netsec.c:970:9: error: passing argument 3 of 'dma_zalloc_coherent' from incompatible pointer type [-Werror=incompatible-pointer-types]

The code is otherwise correct, as the address is never actually used as a
physical address but only passed into a DMA register.  For consistently,
I'm changing the variable name as well, to clarify that this is a DMA
address.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-14 12:00:23 -05:00
David S. Miller
8155aedf51 Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
Daniel Borkmann says:

====================
pull-request: bpf 2018-01-13

The following pull-request contains BPF updates for your *net* tree.

The main changes are:

1) Follow-up fix to the recent BPF out-of-bounds speculation
   fix that prevents max_entries overflows and an undefined
   behavior on 32 bit archs on index_mask calculation, from
   Daniel.

2) Reject unsupported BPF_ARSH opcode in 32 bit ALU mode that
   was otherwise throwing an unknown opcode warning in the
   interpreter, from Daniel.

3) Typo fix in one of the user facing verbose() messages that
   was added during the BPF out-of-bounds speculation fix,
   from Colin.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-14 11:01:33 -05:00
Guochun Mao
23bae78e8a mtd: mtk-nor: modify functions' name more generally
Since more and more Mediatek's SoC can use this driver to
control spi-nor flash, functions' name with "mt8173_" is
no longer properly. Replacing "mt8173_" with "mtk_" will
be more accurate to describe these functions' usable scope.

Signed-off-by: Guochun Mao <guochun.mao@mediatek.com>
Signed-off-by: Cyrille Pitchen <cyrille.pitchen@wedev4u.fr>
2018-01-14 16:14:06 +01:00
Christophe JAILLET
6837befde3 mtd: onenand: samsung: remove incorrect __iomem annotation
'page_buf' and 'oob_buf' are allocated with 'devm_kzalloc()' and should not
have __iomem decoration.

Remove these decorations and some useless casting.

Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
2018-01-14 15:04:56 +01:00
Miquel Raynal
b4525db6f0 MAINTAINERS: Add entry for Marvell NAND controller driver
Add entry for Marvell NAND controller driver and its bindings which will
soon replace the old driver pxa3xx_nand.c.

Signed-off-by: Miquel Raynal <miquel.raynal@free-electrons.com>
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
2018-01-14 14:57:35 +01:00
Ville Syrjälä
fc90ccfd28 Revert "x86/apic: Remove init_bsp_APIC()"
This reverts commit b371ae0d4a. It causes
boot hangs on old P3/P4 systems when the local APIC is enforced in UP mode.

Reported-by: Meelis Roos <mroos@linux.ee>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Dou Liyang <douly.fnst@cn.fujitsu.com>
Cc: yinghai@kernel.org
Cc: bhe@redhat.com
Link: https://lkml.kernel.org/r/20171128145350.21560-1-ville.syrjala@linux.intel.com
2018-01-14 12:14:51 +01:00
Eric W. Biederman
beacd6f7ed x86/mm/pkeys: Fix fill_sig_info_pkey
SEGV_PKUERR is a signal specific si_code which happens to have the same
numeric value as several others: BUS_MCEERR_AR, ILL_ILLTRP, FPE_FLTOVF,
TRAP_HWBKPT, CLD_TRAPPED, POLL_ERR, SEGV_THREAD_ID, as such it is not safe
to just test the si_code the signal number must also be tested to prevent a
false positive in fill_sig_info_pkey.

This error was by inspection, and BUS_MCEERR_AR appears to be a real
candidate for confusion.  So pass in si_signo and check for SIG_SEGV to
verify that it is actually a SEGV_PKUERR

Fixes: 019132ff3d ("x86/mm/pkeys: Fill in pkey field in siginfo")
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-arch@vger.kernel.org
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20180112203135.4669-2-ebiederm@xmission.com
2018-01-14 12:14:51 +01:00
Len Brown
4b5b212723 x86/tsc: Print tsc_khz, when it differs from cpu_khz
If CPU and TSC frequency are the same the printout of the CPU frequency is
valid for the TSC as well:

      tsc: Detected 2900.000 MHz processor

If the TSC frequency is different there is no information in dmesg. Add a
conditional printout:

  tsc: Detected 2904.000 MHz TSC

Signed-off-by: Len Brown <len.brown@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: peterz@infradead.org
Link: https://lkml.kernel.org/r/537b342debcd8e8aebc8d631015dcdf9f9ba8a26.1513920414.git.len.brown@intel.com
2018-01-14 12:14:50 +01:00
Len Brown
b511203093 x86/tsc: Fix erroneous TSC rate on Skylake Xeon
The INTEL_FAM6_SKYLAKE_X hardcoded crystal_khz value of 25MHZ is
problematic:

 - SKX workstations (with same model # as server variants) use a 24 MHz
   crystal.  This results in a -4.0% time drift rate on SKX workstations.

 - SKX servers subject the crystal to an EMI reduction circuit that reduces its
   actual frequency by (approximately) -0.25%.  This results in -1 second per
   10 minute time drift as compared to network time.

This issue can also trigger a timer and power problem, on configurations
that use the LAPIC timer (versus the TSC deadline timer).  Clock ticks
scheduled with the LAPIC timer arrive a few usec before the time they are
expected (according to the slow TSC).  This causes Linux to poll-idle, when
it should be in an idle power saving state.  The idle and clock code do not
graciously recover from this error, sometimes resulting in significant
polling and measurable power impact.

Stop using native_calibrate_tsc() for INTEL_FAM6_SKYLAKE_X.
native_calibrate_tsc() will return 0, boot will run with tsc_khz = cpu_khz,
and the TSC refined calibration will update tsc_khz to correct for the
difference.

[ tglx: Sanitized change log ]

Fixes: 6baf3d6182 ("x86/tsc: Add additional Intel CPU models to the crystal quirk list")
Signed-off-by: Len Brown <len.brown@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: peterz@infradead.org
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/ff6dcea166e8ff8f2f6a03c17beab2cb436aa779.1513920414.git.len.brown@intel.com
2018-01-14 12:14:50 +01:00
Len Brown
da4ae6c4a0 x86/tsc: Future-proof native_calibrate_tsc()
If the crystal frequency cannot be determined via CPUID(15).crystal_khz or
the built-in table then native_calibrate_tsc() will still set the
X86_FEATURE_TSC_KNOWN_FREQ flag which prevents the refined TSC calibration.

As a consequence such systems use cpu_khz for the TSC frequency which is
incorrect when cpu_khz != tsc_khz resulting in time drift.

Return early when the crystal frequency cannot be retrieved without setting
the X86_FEATURE_TSC_KNOWN_FREQ flag. This ensures that the refined TSC
calibration is invoked.

[ tglx: Steam-blastered changelog. Sigh ]

Fixes: 4ca4df0b7e ("x86/tsc: Mark TSC frequency determined by CPUID as known")
Signed-off-by: Len Brown <len.brown@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: peterz@infradead.org
Cc: Bin Gao <bin.gao@intel.com>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/0fe2503aa7d7fc69137141fc705541a78101d2b9.1513920414.git.len.brown@intel.com
2018-01-14 12:14:50 +01:00
Antoine Tenart
9555003a33 Documentation/bindings: crypto: document the SafeXcel EIP97 compatible
This patch adds the SafeXcel EIP97 compatible to the Inside Secure
device tree bindings documentation.

Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-01-14 22:08:48 +11:00
Christophe JAILLET
787e1853ae iio: adc: aspeed: Fix error handling path
The labels and branching order of the error path of 'aspeed_adc_probe()'
are broken.
Re-order the labels and goto statements.

Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2018-01-14 11:01:13 +00:00
Peter Zijlstra
99a9dc98ba x86,perf: Disable intel_bts when PTI
The intel_bts driver does not use the 'normal' BTS buffer which is exposed
through the cpu_entry_area but instead uses the memory allocated for the
perf AUX buffer.

This obviously comes apart when using PTI because then the kernel mapping;
which includes that AUX buffer memory; disappears. Fixing this requires to
expose a mapping which is visible in all context and that's not trivial.

As a quick fix disable this driver when PTI is enabled to prevent
malfunction.

Fixes: 385ce0ea4c ("x86/mm/pti: Add Kconfig")
Reported-by: Vince Weaver <vincent.weaver@maine.edu>
Reported-by: Robert Święcki <robert@swiecki.net>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: greg@kroah.com
Cc: hughd@google.com
Cc: luto@amacapital.net
Cc: Vince Weaver <vince@deater.net>
Cc: torvalds@linux-foundation.org
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20180114102713.GB6166@worktop.programming.kicks-ass.net
2018-01-14 11:42:10 +01:00
W. Trevor King
a237f76268 security/Kconfig: Correct the Documentation reference for PTI
When the config option for PTI was added a reference to documentation was
added as well. But the documentation did not exist at that point. The final
documentation has a different file name.

Fix it up to point to the proper file.

Fixes: 385ce0ea ("x86/mm/pti: Add Kconfig")
Signed-off-by: W. Trevor King <wking@tremily.us>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: linux-mm@kvack.org
Cc: linux-security-module@vger.kernel.org
Cc: James Morris <james.l.morris@oracle.com>
Cc: "Serge E. Hallyn" <serge@hallyn.com>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/3009cc8ccbddcd897ec1e0cb6dda524929de0d14.1515799398.git.wking@tremily.us
2018-01-14 11:42:10 +01:00
Thomas Gleixner
f10ee3dcc9 x86/pti: Fix !PCID and sanitize defines
The switch to the user space page tables in the low level ASM code sets
unconditionally bit 12 and bit 11 of CR3. Bit 12 is switching the base
address of the page directory to the user part, bit 11 is switching the
PCID to the PCID associated with the user page tables.

This fails on a machine which lacks PCID support because bit 11 is set in
CR3. Bit 11 is reserved when PCID is inactive.

While the Intel SDM claims that the reserved bits are ignored when PCID is
disabled, the AMD APM states that they should be cleared.

This went unnoticed as the AMD APM was not checked when the code was
developed and reviewed and test systems with Intel CPUs never failed to
boot. The report is against a Centos 6 host where the guest fails to boot,
so it's not yet clear whether this is a virt issue or can happen on real
hardware too, but thats irrelevant as the AMD APM clearly ask for clearing
the reserved bits.

Make sure that on non PCID machines bit 11 is not set by the page table
switching code.

Andy suggested to rename the related bits and masks so they are clearly
describing what they should be used for, which is done as well for clarity.

That split could have been done with alternatives but the macro hell is
horrible and ugly. This can be done on top if someone cares to remove the
extra orq. For now it's a straight forward fix.

Fixes: 6fd166aae7 ("x86/mm: Use/Fix PCID to optimize user/kernel switches")
Reported-by: Laura Abbott <labbott@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: stable <stable@vger.kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Willy Tarreau <w@1wt.eu>
Cc: David Woodhouse <dwmw@amazon.co.uk>
Link: https://lkml.kernel.org/r/alpine.DEB.2.20.1801140009150.2371@nanos
2018-01-14 10:45:53 +01:00
Linus Walleij
7220c43a4e gpio: davinci: Include proper header
This driver has no business including <linux/gpio.h>, it is a
driver so include <linux/gpio/driver.h>.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-01-14 02:05:38 +01:00
Linus Walleij
45e8bd9cdc gpio: da905x: Include proper header
These drivers has no business including <linux/gpio.h>, they
are drivers so include <linux/gpio/driver.h>.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-01-14 02:00:10 +01:00