Filesystems only ever access 'struct fscrypt_ctx' through fscrypt
functions. But when a filesystem is built without encryption support,
these functions are all stubbed out, so the declaration of fscrypt_ctx
is unneeded. Therefore, move it from fscrypt.h to fscrypt_supp.h.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
The fscrypt_info kmem_cache is internal to fscrypt; filesystems don't
need to access it. So move its declaration into fscrypt_private.h.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
fscrypt_control_page() is already split into two versions depending on
whether the filesystem is being built with encryption support or not.
Move them into the appropriate headers.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
fscrypt_has_encryption_key() is already split into two versions
depending on whether the filesystem is being built with encryption
support or not. Move them into the appropriate headers.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
A few fixes for 4.16:
- Cleanup the the remains of ttm io_mem_pfn
- A couple dpm quirks for SI
- Add Chunming as another amdgpu maintainer
- A few more huge page fixes
- A few other misc fixes
* 'drm-next-4.16' of git://people.freedesktop.org/~agd5f/linux:
drm/amd/pp: Implement get_max_high_clocks for CI/VI
MAINTAINERS: add David (Chunming) Zhou as additional amdgpu maintainer
drm/amdgpu: fix 64bit BAR detection
drm/amdgpu: optimize moved handling only when vm_debug is inactive
drm/amdgpu: simplify huge page handling
drm/amdgpu: update VM PDs after the PTs
drm/amdgpu: minor optimize VM moved handling v2
drm/amdgpu: loosen the criteria for huge pages a bit
drm/amd/powerplay: set pp_num_states as 0 on error situation
drm/ttm: specify DMA_ATTR_NO_WARN for huge page pools
drm/ttm: remove ttm_bo_default_io_mem_pfn
staging: remove the default io_mem_pfn set
drm/amd/powerplay: fix memory leakage when reload (v2)
drm/amdgpu/gfx9: only init the apertures used by KGD (v2)
drm/amdgpu: add atpx quirk handling (v2)
drm/amdgpu: Add dpm quirk for Jet PRO (v2)
drm/radeon: Add dpm quirk for Jet PRO (v2)
This fixes the following warning by also sending the flags argument for
gpio controllers:
Property 'cs-gpios', cell 6 is not a phandle reference in
/ahb/apb/spi@e0100000
Fixes: 8113ba917d ("ARM: SPEAr: DT: Update device nodes")
Cc: stable@vger.kernel.org # v3.8+
Reported-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
The "dmas" cells for the designware DMA controller need to have only 3
properties apart from the phandle: request line, src master and
destination master. But the commit 6e8887f60f updated it incorrectly
while moving from platform code to DT. Fix it.
Cc: stable@vger.kernel.org # v3.10+
Fixes: 6e8887f60f ("ARM: SPEAr13xx: Pass generic DW DMAC platform data from DT")
Reported-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
request with five new patches fixing review comments and errors.
Apart from three small fixes there's two larger patches that in the end
checks that memory to be registered really is normal cached memory.
-----BEGIN PGP SIGNATURE-----
iQI3BAABCgAhBQJaVzZeGhxqZW5zLndpa2xhbmRlckBsaW5hcm8ub3JnAAoJELWw
uEGXj+zTbVMQAOK22g34O1EouTBpFvw/Ch4aZ7AFr+NoXxyphhIeg/4RpWwCpiCY
+xDBv4aHk6Opv0uhWGJJHMzRgE6eNYjLVVd8tGpDtRdqQWJP0MYVH2sHu5bnfJZS
LfDUk+t2ULxgzVvIBvyccslTSAGqc5K0mnzW3DXrwkKtRmpfl27tg/OFph08lHni
dhAOeW4m6PGWcWlQklDlpykTt8KUHMaIx5eNx+IBCYDcfQkev3Te49EwDK05ObjU
MC6M1rZJmzb28UumkUC1B8nyS/PqxB8xrkyqYqehic6eBH9WIAn+paaLgSjocvqc
gXwScaTNyniUPBMR73sNyARzpYgI0CvcqJ9R0uIGlSmwj9LQqrc0vtiJAR0YDeir
FzweH8uhkU2qhZjH3WSoLGS4CSm2scIhEE3jbHpRjDdqvajoQBbOxPKusQnIjs/p
iDZwYKuvH2f7TQtdwigT36k7KP0688LRSUrp7CeY7sIlzj0M3CLEzU/5OORBgqIl
5KyOt6R8aVbQtABDBnzqIn1BYqA05KWzZFqwlDPckCNfBjgHd45rz4HGvwqCf9JI
dKZ3VZDtBOeQIpBRj02mbEn0mUhDyztd7we+WkzTz0AxmEAw8r8yn1035WhZILGw
ntXMk4PX9uVwQxReE0n1Gyv5UxCP1u+RMGE7G3hQoDBGNdhGxHw9bDqV
=0+NS
-----END PGP SIGNATURE-----
Merge tag 'tee-drv-dynamic-shm+fixes-for-v4.16' of https://git.linaro.org/people/jens.wiklander/linux-tee into next/drivers
This pull request updates the previous tee-drv-dynamic-shm-for-v4.16 pull
request with five new patches fixing review comments and errors.
Apart from three small fixes there's two larger patches that in the end
checks that memory to be registered really is normal cached memory.
* tag 'tee-drv-dynamic-shm+fixes-for-v4.16' of https://git.linaro.org/people/jens.wiklander/linux-tee:
tee: shm: Potential NULL dereference calling tee_shm_register()
tee: shm: don't put_page on null shm->pages
tee: shm: make function __tee_shm_alloc static
tee: optee: check type of registered shared memory
tee: add start argument to shm_register callback
Signed-off-by: Olof Johansson <olof@lixom.net>
linux-4.15 warns about missing MODULE_LICENSE tags such as these
WARNING: modpost: missing MODULE_LICENSE() in drivers/bus/omap_l3_noc.o
WARNING: modpost: missing MODULE_LICENSE() in drivers/bus/omap_l3_smx.o
For completeness, I'm also adding MODULE_AUTHOR and MODULE_DESCRIPTION
tags, but I decided to leave out the email addresses, as all three
authors are working for other companies now.
Cc: Sricharan R <sricharan@codeaurora.org>
Cc: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Santosh Shilimkar <ssantosh@kernel.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
dtc complains about the lack of #coolin-cells properties for the
CPU nodes that are referred to as "cooling-device":
arch/arm64/boot/dts/mediatek/mt8173-evb.dtb: Warning (cooling_device_property): Missing property '#cooling-cells' in node /cpus/cpu@0 or bad phandle (referred from /thermal-zones/cpu_thermal/cooling-maps/map@0:cooling-device[0])
arch/arm64/boot/dts/mediatek/mt8173-evb.dtb: Warning (cooling_device_property): Missing property '#cooling-cells' in node /cpus/cpu@100 or bad phandle (referred from /thermal-zones/cpu_thermal/cooling-maps/map@1:cooling-device[0])
Apparently this property must be '<2>' to match the binding.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Tested-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
The PMU node has no working interrupt, as shown by this dtc warning:
arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dtb: Warning (interrupts_property): Missing interrupt-parent for /pmu
This adds an interrupt-parent property so we can correct parse
that interrupt number.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Dinh Nguyen <dinguyen@kernel.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
- Fix a KASAN reported use after free
- Whitelist a register to avoid hangs
- GVT fixes
-----BEGIN PGP SIGNATURE-----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=EmkE
-----END PGP SIGNATURE-----
Merge tag 'drm-intel-fixes-2018-01-11-1' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes
Hopefully final drm/i915 fixes for v4.15:
- Fix a KASAN reported use after free
- Whitelist a register to avoid hangs
- GVT fixes
* tag 'drm-intel-fixes-2018-01-11-1' of git://anongit.freedesktop.org/drm/drm-intel:
drm/i915: Don't adjust priority on an already signaled fence
drm/i915: Whitelist SLICE_COMMON_ECO_CHICKEN1 on Geminilake.
drm/i915/gvt: Fix stack-out-of-bounds bug in cmd parser
drm/i915/gvt: Clear the shadow page table entry after post-sync
Two important fixes for vmwgfx.
The off-by-one fix could cause a malicious user to potentially crash the
kernel.
The framebuffer map cache fix can under some circumstances enable a user to
read from or write to freed pages.
* 'vmwgfx-fixes-4.15' of git://people.freedesktop.org/~thomash/linux:
drm/vmwgfx: Potential off by one in vmw_view_add()
drm/vmwgfx: Don't cache framebuffer maps
A single fix for a Tegra124 eDP regression introduced by the SOR changes
in v4.15-rc1.
-----BEGIN PGP SIGNATURE-----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=FKFr
-----END PGP SIGNATURE-----
Merge tag 'drm/tegra/for-4.15-rc8' of git://anongit.freedesktop.org/tegra/linux into drm-fixes
drm/tegra: Fixes for v4.15-rc8
A single fix for a Tegra124 eDP regression introduced by the SOR changes
in v4.15-rc1.
* tag 'drm/tegra/for-4.15-rc8' of git://anongit.freedesktop.org/tegra/linux:
drm/tegra: sor: Fix hang on Tegra124 eDP
The bulk of these changes are preparation work and addition of support
for Tegra186. Currently only HDMI output (the primary output on Jetson
TX2) is supported, but the hardware is also capable of doing DSI and
DisplayPort.
Tegra DRM now also uses the atomic commit helpers instead of the open-
coded variant that was only doing half its job. As a bit of a byproduct
of the Tegra186 support the driver also gained HDMI 2.0 as well as zpos
property support.
Along the way there are also a few patches to clean up a few things and
fix minor issues.
-----BEGIN PGP SIGNATURE-----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=FfXI
-----END PGP SIGNATURE-----
Merge tag 'drm/tegra/for-4.16-rc1-fixes' of git://anongit.freedesktop.org/tegra/linux into drm-next
drm/tegra: Changes for v4.16-rc1
The bulk of these changes are preparation work and addition of support
for Tegra186. Currently only HDMI output (the primary output on Jetson
TX2) is supported, but the hardware is also capable of doing DSI and
DisplayPort.
Tegra DRM now also uses the atomic commit helpers instead of the open-
coded variant that was only doing half its job. As a bit of a byproduct
of the Tegra186 support the driver also gained HDMI 2.0 as well as zpos
property support.
Along the way there are also a few patches to clean up a few things and
fix minor issues.
* tag 'drm/tegra/for-4.16-rc1-fixes' of git://anongit.freedesktop.org/tegra/linux: (51 commits)
drm/tegra: dc: Properly cleanup overlay planes
drm/tegra: dc: Fix possible_crtcs mask for planes
drm/tegra: dc: Restore YUV overlay support
drm/tegra: dc: Implement legacy blending
drm/tegra: Correct timeout in tegra_syncpt_wait
drm/tegra: gem: Correct iommu_map_sg() error checking
drm/tegra: dc: Link DC1 to DC0 on Tegra20
drm/tegra: Fix non-debugfs builds
drm/tegra: dpaux: Keep reset defaults for hybrid pad parameters
drm/tegra: Mark Tegra186 display hub PM functions __maybe_unused
drm/tegra: Use IOMMU groups
gpu: host1x: Use IOMMU groups
drm/tegra: Implement zpos property
drm/tegra: dc: Remove redundant spinlock
drm/tegra: dc: Use direct offset to plane registers
drm/tegra: dc: Support more formats
drm/tegra: fb: Force alpha formats
drm/tegra: dpaux: Add Tegra186 support
drm/tegra: dpaux: Implement runtime PM
drm/tegra: sor: Support HDMI 2.0 modes
...
Updates for 4.16.. fairly small this time around, main thing is
devfreq support for the gpu.
* tag 'drm-msm-next-2018-01-10' of git://people.freedesktop.org/~robclark/linux:
drm/msm: Add devfreq support for the GPU
drm/msm/adreno: a5xx: Explicitly program the CP0 performance counter
drm/msm/adreno: Read the speed bins for a5xx targets
drm/msm/adreno: Move clock parsing to adreno_gpu_init()
drm/msm/adreno: Cleanup chipid parsing
drm/msm/gpu: Remove unused bus scaling code
drm/msm/adreno: Remove a useless call to dev_pm_opp_get_freq()
drm/msm/adreno: Call dev_pm_opp_put()
drm/msm: Fix NULL deref in adreno_load_gpu
drm/msm: gpu: Only sync fences on rings that exist
drm/msm: fix leak in failed get_pages
drm/msm: avoid false-positive -Wmaybe-uninitialized warning
drm/msm/mdp4: Deduplicate bus_find_device() by name matching
drm/msm: add missing MODULE_FIRMWARE declarations
drm/msm: update adreno firmware path in MODULE_FIRMWARE
drm/msm: free kstrdup'd cmdline
drm/msm: fix msm_rd_dump_submit prototype
drm/msm: fix spelling mistake: "ringubffer" -> "ringbuffer"
After moving the SoC device initialization to an early initcall in
commit f780429adf ("soc: brcmstb: biuctrl: Move to early_initcall"),
the Broadcom STB SoC device is registered on all platforms if support
for the device is enabled in the kernel configuration.
This causes an additional SoC device to appear on platforms that already
register a native one. In case of Tegra the STB SoC device is registered
as soc0 (with totally meaningless content in the sysfs attributes) and
causes various scripts and programs to fail because they don't know how
to parse that data.
To fix this, duplicate the check from brcmstb_soc_device_early_init()
that already prevents the code from doing anything nonsensical on non-
STB platforms.
Fixes: f780429adf ("soc: brcmstb: biuctrl: Move to early_initcall")
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
One fix that fixes the display pipeline description in the device tree
for the A10 and A20 SoCs. This description was introduced in 4.15-rc1
with a mismatch in the graph remote endpoints, which would likely
result in the driver misinterpreting how the individual components fit
together.
-----BEGIN PGP SIGNATURE-----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=m59a
-----END PGP SIGNATURE-----
Merge tag 'sunxi-fixes-for-4.15-2' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into fixes
Allwinner fixes for 4.15, round 2
One fix that fixes the display pipeline description in the device tree
for the A10 and A20 SoCs. This description was introduced in 4.15-rc1
with a mismatch in the graph remote endpoints, which would likely
result in the driver misinterpreting how the individual components fit
together.
* tag 'sunxi-fixes-for-4.15-2' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
ARM: dts: sun[47]i: Fix display backend 1 output to TCON0 remote endpoint
Signed-off-by: Olof Johansson <olof@lixom.net>
2 device tree related fixes fixing 2 issues:
- broken pinctrl support since 4.11 on OpenBlocks A7
- implicit clock dependency making the kernel hang if the Xenon sdhci
module was loaded before the mvpp2 Ethernet support (for this one
the driver had to be fixed which was done in v4.14)
-----BEGIN PGP SIGNATURE-----
iIEEABECAEEWIQQYqXDMF3cvSLY+g9cLBhiOFHI71QUCWk+glCMcZ3JlZ29yeS5j
bGVtZW50QGZyZWUtZWxlY3Ryb25zLmNvbQAKCRALBhiOFHI71Zt+AJ9ozVoJfwdf
79od8wlcB4PUvHb6FgCgqkH7FXqfkpHLdFYm8E9GRlj6nVY=
=9vZv
-----END PGP SIGNATURE-----
Merge tag 'mvebu-fixes-4.15-1' of git://git.infradead.org/linux-mvebu into fixes
mvebu fixess for 4.15 (part 1)
2 device tree related fixes fixing 2 issues:
- broken pinctrl support since 4.11 on OpenBlocks A7
- implicit clock dependency making the kernel hang if the Xenon sdhci
module was loaded before the mvpp2 Ethernet support (for this one
the driver had to be fixed which was done in v4.14)
* tag 'mvebu-fixes-4.15-1' of git://git.infradead.org/linux-mvebu:
ARM64: dts: marvell: armada-cp110: Fix clock resources for various node
ARM: dts: kirkwood: fix pin-muxing of MPP7 on OpenBlocks A7
Signed-off-by: Olof Johansson <olof@lixom.net>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=Cjvs
-----END PGP SIGNATURE-----
Merge tag 'davinci-for-v4.16/dt' of https://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci into fixes
A DT warning fix for W=1 warning message.
* tag 'davinci-for-v4.16/dt' of https://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci:
ARM: dts: da850-lcdk: Remove leading 0x and 0s from unit address
Signed-off-by: Olof Johansson <olof@lixom.net>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iQEcBAABCAAGBQJaV5ghAAoJEEp/3jgCEfOL/bEH/3UopVYhLpHPqIAGCQuONuvG
4imm/19uVIsbJMCHZ/bbksPPOaswqCKws5ScfIJKzg9vI8PQaQ28BnQh/vELHlmk
lUgdXgVPaCoM/3UlCquxmBn5IooLt0t7LdCvMO2MvF3mf+jThyfwcoc1H2xe1Yh2
k9dPQWcfNBY7jGTBGzqyuNwfg9DZSMyBRx4JmOsqlCI/GDcA8DsLHIykA4wRQRF+
gtSCYeUuZsfukCk4Z1ImoYyfbtK/tYH4s9UOc5pEsd0s0NUs8bn7hgQn2QKWmQt4
HsOzNTiAl/pXSRi8BMqPyFGVdZLT1cRkeo/FW1Lkxg5NqJmv005ebJ1Jx8YHW9A=
=JTlC
-----END PGP SIGNATURE-----
Merge tag 'ceph-for-4.15-rc8' of git://github.com/ceph/ceph-client
Pull ceph fixes from Ilya Dryomov:
"Two rbd fixes for 4.12 and 4.2 issues respectively, marked for
stable"
* tag 'ceph-for-4.15-rc8' of git://github.com/ceph/ceph-client:
rbd: set max_segments to USHRT_MAX
rbd: reacquire lock should update lock owner client id
A few improvements to our DT support, with:
- basic DRM support for the A83t
- simplefb support for the H3 and H5 SoCs
- One fix for the USB ethernet on the Orange Pi R1
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEE0VqZU19dR2zEVaqr0rTAlCFNr3QFAlpPTzIACgkQ0rTAlCFN
r3SwvRAAkG4Idi3wsORz0+RwIFLHeiPNzE4iGrnwAsX1RhlYn17LHcGA2xBkV5d9
Khk1AoOKkhpNKJ11e1UFffU0jMeibDXaWEbcE3fhLP6X3wnkuspOZuSCsk94C+oU
xLOKVTy9Kw+yQPvOzqWmiI84YCSkH1SGw1mPOnTUD2Nz7Soux9I6hr3AO6x50pIW
5dq9tbxNN53YARc28ydOFtChnR2NTPQrLnGefU3eFjMp4F1xcEZq54TN3kBbF5U2
x7rbDunDh13EI8Qhi1jzgnKedXkkSFc3Zm0IhnjzEVVms9TS0Fz0b5KDT8RG/f9+
O3hHXcsvCnxadULcq4xEWB4WV3Xjmt8x6Y8RUlkYFgBfA2iOJcqd2jJbWB98iaVB
Ce7w+48yBWVkG35vGIGpmO/TiY8czicveFy2T98zDmHPiwzCNn3+0XExDQsgklt7
gR/8CWCqVDhK0XnZadntkZuq/bXOJzVQ2BpnZXIC+cGz1GjmAGR9Ey5l2VusBZLU
zEhTGbyBbfaJikR+4sRxkPx7DFkvjXbM/Y/cEHgD0CqZboynFLgPiewHTRcCTYWb
4qaBI660jYINHetQWdCG2Iz3gjAjaJEyEBtK61BDL9hX4del2hVwvq7t7F7NMV6L
EZFCDDUOfky56gKCYSXPWU/S6MX5hzIw8Y5/csQVMQCOoOkqe7o=
=bDG2
-----END PGP SIGNATURE-----
Merge tag 'sunxi-dt-for-4.16-2' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into next/dt
Allwinner DT changes for 4.16, bis
A few improvements to our DT support, with:
- basic DRM support for the A83t
- simplefb support for the H3 and H5 SoCs
- One fix for the USB ethernet on the Orange Pi R1
* tag 'sunxi-dt-for-4.16-2' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
ARM: dts: sun8i: a711: Enable the LCD
ARM: dts: sun8i: a83t: Add LVDS pins group
ARM: dts: sun8i: a83t: Enable the PWM
ARM: dts: sun8i: a83t: Add display pipeline
ARM: sunxi: h3/h5: add simplefb nodes
arm64: allwinner: h5: add compatible string for DE2 CCU
ARM: sun8i: h3/h5: add DE2 CCU device node for H3
dt-bindings: simplefb-sunxi: add pipelines for DE2
ARM: dts: sun8i: fix USB Ethernet of Orange Pi R1
Signed-off-by: Olof Johansson <olof@lixom.net>
introduced by yours truly.
-----BEGIN PGP SIGNATURE-----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=S8Fj
-----END PGP SIGNATURE-----
Merge tag 'gpio-v4.15-4' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio
Pull GPIO fix from Linus Walleij:
"Fix a raw vs elaborate GPIO descriptor bug introduced by yours truly"
* tag 'gpio-v4.15-4' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio:
gpio: Add missing open drain/source handling to gpiod_set_value_cansleep()
include IR, SPI and ethernet MAC support for the new AXG family SoCs.
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEEe4dGDhaSf6n1v/EMWTcYmtP7xmUFAlpQC6wACgkQWTcYmtP7
xmVazBAAh/riNhKvUEoHCa1TQ8f0ELfGkZ7ckOBtTEBE9DoQQXZ08jU+LwEEy1N3
/5Uby3lquAYZiJzMuXfaJ63V+07OzIDt9hYzFBToMPf2ZLxSyGS8ZTWsUveBRXep
tAY8ETtK8u3tq1pQH0A5lGc84yR8MM74We91GwuCA4S6whYqVbO1dInSb0mVqX50
vVKChc+jUgXwy4zaazgSUKcjZmexSCF7zA9ZXnGM3wg3s4K3HhzLZwCm30GU30mC
Of5uCT02cR+HkRC1fDfo3mY9oRr19krYz9hJIsMk3mnmQS0XeI+HJ1DX+5K8l4YP
2ayVueBCLvqG7a1T4MLV6Hb7B1//Ejz6dT6UfTSSQszKXA3FQKIER7vt4Hg9IcCW
rH5hXnPCko5yfjMpym3yr4+97fi6U1iJccc+DYRs0dq1Wrth40BwZH6tCrQVHfOQ
jY6c2Ha5GDPTHbsW39vb7JvsFGYN2wlmmC1ThqG4e9kF8l1ZW+m433dJOicWMk2m
55SqCkbmkboVy9bYC6Tgrx6/KAa6vqMK0oXHADSJgNeccEZZeiTttlVwAiF9b1/f
1umUwKSfRhAvtvHD+ynoZIQ64oEnWGeGyc5EEJIdY+q7T6csT2E+pi75+y4q6jI2
xMTuK5iwXNr7PF612Tmr5NMaB+59Abdshp9IXxsNDPJiNBTLagA=
=lk2H
-----END PGP SIGNATURE-----
Merge tag 'amlogic-dt64-3' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into next/dt
Another round of 64-bit DT changes for the new Amlogic SoCs. These
include IR, SPI and ethernet MAC support for the new AXG family SoCs.
* tag 'amlogic-dt64-3' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic:
ARM64: dts: meson-axg: enable ethernet for A113D S400 board
ARM64: dts: meson-axg: add ethernet mac controller
ARM64: dts: meson-axg: add the SPICC controller
ARM64: dts: meson-axg: enable IR controller
arm64: dts: meson-axg: switch uart_ao clock to CLK81
clk: meson-axg: add clocks dt-bindings required header
dt-bindings: clock: add compatible variant for the Meson-AXG
Signed-off-by: Olof Johansson <olof@lixom.net>
get_device_error_info() reads error information from registers in the AER
capability. If we call it for a device that has no AER capability, it
should return an error, but previously it returned success.
Return 0 (error) if the device doesn't have an AER capability.
Signed-off-by: Keith Busch <keith.busch@intel.com>
[bhelgaas: changelog]
Signed-off-by: Bjorn Helgaas <helgaas@kernel.org>
To avoid configuration override, timestamp set call will
be moved from the netdevice open flow to the init flow.
By this, a close-open procedure will not override the timestamp
configuration.
In addition, the change will rename mlx5e_timestamp_set function
to be mlx5e_timestamp_init.
Fixes: ef9814deaf ("net/mlx5e: Add HW timestamping (TS) support")
Signed-off-by: Feras Daoud <ferasda@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
PPS event did not update ptp_clock_event fields, therefore,
timestamp value was not updated correctly. This fix updates the
event source and the timestamp value for each PPS event.
Fixes: 7c39afb394 ("net/mlx5: PTP code migration to driver core section")
Signed-off-by: Feras Daoud <ferasda@mellanox.com>
Reported-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Set features function sets dev->features in order to keep track of which
features were successfully changed and which weren't (in case the user
asks for more than one change in a single command).
This breaks the logic in __netdev_update_features which assumes that
dev->features is not changed on success and checks for diffs between
features and dev->features (diffs that might not exist at this point
because of the driver override).
The solution is to keep track of successful/failed feature changes and
assign them to dev->features in case of failure only.
Fixes: 0e405443e8 ("net/mlx5e: Improve set features ndo resiliency")
Signed-off-by: Gal Pressman <galp@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Should not do the following swap between TCs 0 and 1
when max num of TCs is 1:
tclass[prio=0]=1, tclass[prio=1]=0, tclass[prio=i]=i (for i>1)
Fixes: 08fb1dacdd ("net/mlx5e: Support DCBNL IEEE ETS")
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
ethtool statistics should be updated even when the interface is down
since it shows more than just netdev counters, which might change while
the logical link is down.
One useful use case, for example, is when running RoCE traffic over the
interface (while the logical link is down, but physical link is up) and
examining rx_prioX_bytes.
Fixes: f62b8bb8f2 ("net/mlx5: Extend mlx5_core to support ConnectX-4 Ethernet functionality")
Signed-off-by: Gal Pressman <galp@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
We didn't store the result of mlx5_init_once, due to that
mlx5_load_one returned success on error. Fix that.
Fixes: 59211bd3b6 ("net/mlx5: Split the load/unload flow into hardware and software flows")
Signed-off-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Eugenia Emantayev <eugenia@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Change mlx5_get_uars_page to return ERR_PTR in case of
allocation failure. Change all callers accordingly to
check the IS_ERR(ptr) instead of NULL.
Fixes: 59211bd3b6 ("net/mlx5: Split the load/unload flow into hardware and software flows")
Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com>
Signed-off-by: Eugenia Emantayev <eugenia@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Fix a memory leak where in case that pci_alloc_irq_vectors failed,
priv->irq_info was not released.
Fixes: e126ba97db ("mlx5: Add driver for Mellanox Connect-IB adapters")
Signed-off-by: Alaa Hleihel <alaa@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
mlx5_get_vector_affinity used to call pci_irq_get_affinity and after
reverting the patch that sets the device affinity via PCI_IRQ_AFFINITY
API, calling pci_irq_get_affinity becomes useless and it breaks RDMA
mlx5 users. To fix this, this patch provides an alternative way to
retrieve IRQ vector affinity using legacy IRQ API, following
smp_affinity read procfs implementation.
Fixes: 231243c827 ("Revert mlx5: move affinity hints assignments to generic code")
Fixes: a435393aca ("mlx5: move affinity hints assignments to generic code")
Cc: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
pci_get_bus_and_slot() is restrictive such that it assumes domain=0 as
where a PCI device is present. This restricts the device drivers to be
reused for other domain numbers.
Getting ready to remove pci_get_bus_and_slot() function in favor of
pci_get_domain_bus_and_slot().
Hard-code the domain number as 0 for the AMD IOMMU driver.
Signed-off-by: Sinan Kaya <okaya@codeaurora.org>
Signed-off-by: Bjorn Helgaas <helgaas@kernel.org>
Reviewed-by: Gary R Hook <gary.hook@amd.com>
Acked-by: Joerg Roedel <jroedel@suse.de>
pci_get_bus_and_slot() is restrictive such that it assumes domain=0 as
where a PCI device is present. This restricts the device drivers to be
reused for other domain numbers.
Getting ready to remove pci_get_bus_and_slot() function in favor of
pci_get_domain_bus_and_slot().
Replace pci_get_bus_and_slot() with pci_get_domain_bus_and_slot()
and extract the domain number from struct pci_dev.
Signed-off-by: Sinan Kaya <okaya@codeaurora.org>
Signed-off-by: Bjorn Helgaas <helgaas@kernel.org>
Acked-by: David S. Miller <davem@davemloft.net>
pci_get_bus_and_slot() is restrictive such that it assumes domain=0 as
where a PCI device is present. This restricts the device drivers to be
reused for other domain numbers.
Getting ready to remove pci_get_bus_and_slot() function in favor of
pci_get_domain_bus_and_slot().
Replace pci_get_bus_and_slot() with pci_get_domain_bus_and_slot()
and extract the domain number from
1. struct pci_dev
2. struct pci_dev through drm_device->pdev
3. struct pci_dev through fb->subdev->drm_device->pdev
Signed-off-by: Sinan Kaya <okaya@codeaurora.org>
Signed-off-by: Bjorn Helgaas <helgaas@kernel.org>
pci_get_bus_and_slot() is restrictive such that it assumes domain=0 as
where a PCI device is present. This restricts the device drivers to be
reused for other domain numbers.
Getting ready to remove pci_get_bus_and_slot() function in favor of
pci_get_domain_bus_and_slot().
Add domain parameter to CDV_MSG_READ32, CDV_MSG_WRITE32, MRST_MSG_READ32,
MRST_MSG_WRITE32, MDFLD_MSG_READ32, MDFLD_MSG_WRITE32.
Extract pci_dev from struct drm_device and use pdev to find the domain
number while calling pci_get_domain_bus_and_slot().
Signed-off-by: Sinan Kaya <okaya@codeaurora.org>
Signed-off-by: Bjorn Helgaas <helgaas@kernel.org>
pci_get_bus_and_slot() is restrictive such that it assumes domain=0 as
where a PCI device is present. This restricts the device drivers to be
reused for other domain numbers.
Getting ready to remove pci_get_bus_and_slot() function in favor of
pci_get_domain_bus_and_slot().
We don't search for the device in other domains than zero. This is because
on x86 platforms the BIOS executes only devices which are in domain 0.
Furthermore, the iBFT spec doesn't have a domain id field.
Signed-off-by: Sinan Kaya <okaya@codeaurora.org>
Signed-off-by: Bjorn Helgaas <helgaas@kernel.org>
Acked-by: Konrad Rzeszutek Wilk <konrad@kernel.org>
pci_get_bus_and_slot() is restrictive such that it assumes domain=0 as
where a PCI device is present. This restricts the device drivers to be
reused for other domain numbers.
Getting ready to remove pci_get_bus_and_slot() function in favor of
pci_get_domain_bus_and_slot().
Domain number is not available in struct edd_info. Hard-coding the domain
number as 0.
Signed-off-by: Sinan Kaya <okaya@codeaurora.org>
Signed-off-by: Bjorn Helgaas <helgaas@kernel.org>
pci_get_bus_and_slot() is restrictive such that it assumes domain=0 as
where a PCI device is present. This restricts the device drivers to be
reused for other domain numbers.
Getting ready to remove pci_get_bus_and_slot() function in favor of
pci_get_domain_bus_and_slot().
Replace pci_get_bus_and_slot() with pci_get_domain_bus_and_slot()
and extract the domain number from struct pci_dev.
Signed-off-by: Sinan Kaya <okaya@codeaurora.org>
Signed-off-by: Bjorn Helgaas <helgaas@kernel.org>
pci_get_bus_and_slot() is restrictive such that it assumes domain=0 as
where a PCI device is present. This restricts the device drivers to be
reused for other domain numbers.
Getting ready to remove pci_get_bus_and_slot() function in favor of
pci_get_domain_bus_and_slot().
Replace pci_get_bus_and_slot() with pci_get_domain_bus_and_slot()
and extract the domain number from struct pci_dev.
Signed-off-by: Sinan Kaya <okaya@codeaurora.org>
Signed-off-by: Bjorn Helgaas <helgaas@kernel.org>
pci_get_bus_and_slot() is restrictive such that it assumes domain=0 as
where a PCI device is present. This restricts the device drivers to be
reused for other domain numbers.
Getting ready to remove pci_get_bus_and_slot() function in favor of
pci_get_domain_bus_and_slot().
Use pci_get_domain_bus_and_slot() and extract the actual domain number
from the pdev passed in.
Signed-off-by: Sinan Kaya <okaya@codeaurora.org>
Signed-off-by: Bjorn Helgaas <helgaas@kernel.org>
Acked-by: Tejun Heo <tj@kernel.org>
pci_get_bus_and_slot() is restrictive such that it assumes domain=0 as
where a PCI device is present. This restricts the device drivers to be
reused for other domain numbers.
Getting ready to remove pci_get_bus_and_slot() function in favor of
pci_get_domain_bus_and_slot().
Use domain number of 0 as the domain number is not available in struct
irq_routing_table.
Signed-off-by: Sinan Kaya <okaya@codeaurora.org>
Signed-off-by: Bjorn Helgaas <helgaas@kernel.org>
Acked-by: Thomas Gleixner <tglx@linutronix.de>