The F81532/534 had 3 output pin (M0/SD, M1, M2) with open-drain mode to
control transceiver. We'll read it from internal Flash with address
0x2f05~0x2f08 for 4 ports. The value is range from 0 to 7. The M0/SD is
MSB of this value. For a examples, If read value is 6, we'll write M0/SD,
M1, M2 as 1, 1, 0.
Signed-off-by: Ji-Ze Hong (Peter Hong) <hpeter+linux_kernel@gmail.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
The F81532/534 had auto RTS direction support for RS485 mode.
We'll read it from internal Flash with address 0x2f01~0x2f04 for 4 ports.
There are 4 conditions below:
0: F81534_PORT_CONF_RS232.
1: F81534_PORT_CONF_RS485.
2: value error, default to F81534_PORT_CONF_RS232.
3: F81534_PORT_CONF_RS485_INVERT.
F81532/534 Clock register (offset +08h)
Bit0: UART Enable (always on)
Bit2-1: Clock source selector
00: 1.846MHz.
01: 18.46MHz.
10: 24MHz.
11: 14.77MHz.
Bit4: Auto direction(RTS) control (RTS pin Low when TX)
Bit5: Invert direction(RTS) when Bit4 enabled (RTS pin high when TX)
Signed-off-by: Ji-Ze Hong (Peter Hong) <hpeter+linux_kernel@gmail.com>
[ johan: rename mode-mask define, and only use GENMASK() for masks ]
Signed-off-by: Johan Hovold <johan@kernel.org>
Immediate flag has been used to disable per-task consistency and patch
all tasks immediately. It could be useful if the patch doesn't change any
function or data semantics.
However, it causes problems on its own. The consistency problem is
currently broken with respect to immediate patches.
func a
patches 1i
2i
3
When the patch 3 is applied, only 2i function is checked (by stack
checking facility). There might be a task sleeping in 1i though. Such
task is migrated to 3, because we do not check 1i in
klp_check_stack_func() at all.
Coming atomic replace feature would be easier to implement and more
reliable without immediate.
Thus, remove immediate feature completely and save us from the problems.
Note that force feature has the similar problem. However it is
considered as a last resort. If used, administrator should not apply any
new live patches and should plan for reboot into an updated kernel.
The architectures would now need to provide HAVE_RELIABLE_STACKTRACE to
fully support livepatch.
Signed-off-by: Miroslav Benes <mbenes@suse.cz>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The F81532/534 had 4 clocksource 1.846/18.46/14.77/24MHz and baud rates
can be up to 1.5Mbits with 24MHz.
This device may generate data overrun when baud rate setting to 921600bps
or higher with old UART trigger level setting (8x14=112) with full
loading. We'll change trigger level from 8x14=112 to 8x8=64 to avoid data
overrun.
Also the read/write of EP0 will be affected by this patch. The worst case
of responding time is 20s when all serial port are full loading and trying
to access EP0, so we change EP0 timeout from 10 to 20s.
F81532/534 Clock register (offset +08h)
Bit0: UART Enable (always on)
Bit2-1: Clock source selector
00: 1.846MHz.
01: 18.46MHz.
10: 24MHz.
11: 14.77MHz.
Signed-off-by: Ji-Ze Hong (Peter Hong) <hpeter+linux_kernel@gmail.com>
[ johan: only use GENMASK() for masks ]
Signed-off-by: Johan Hovold <johan@kernel.org>
Switch over to dynamically creating device attributes, which are in turn
used by the perf core to expose available counters in sysfs.
This way we do not expose counters which are not avaiable on the current
platform, and are so more consistent between what we reply to open
attempts via the perf_event_open(2), and what is discoverable in sysfs.
v2:
* Simplify attribute pointer freeing loop.
* Changed attr init from macro to function.
* More common error unwind. (Chris Wilson)
* Rename some locals. (Chris Wilson)
v3:
* Fixed double semi-colon. (Chris Wilson)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20180111083525.32394-1-tvrtko.ursulin@linux.intel.com
With firmware 1.07 having fixed the state corruption issue, we can enable
the headless GT performance workaround for CNL as well. (Equivalent to
b68763741a ("drm/i915: Restore GT performance in headless mode with DMC
loaded") on other affected platforms.)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=100572
Testcase: igt/gem_exec_nop/headless
Cc: Imre Deak <imre.deak@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Dmitry Rogozhkin <dmitry.v.rogozhkin@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180111082417.795-1-tvrtko.ursulin@linux.intel.com
Fix to return error code -ENOMEM from the error handling
case instead of 0, as done elsewhere in this function.
Fixes: 5a2a30024d ("gpio: Add gpio driver support for ThunderX and OCTEON-TX")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Acked-by: David Daney <david.daney@cavium.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Make consistent error handling of all mtk_hw_get_value occurrences using
propagating error code from the internal instead of creating a new one.
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Geminilake requires the 3D driver to select whether barriers are
intended for compute shaders, or tessellation control shaders, by
whacking a "Barrier Mode" bit in SLICE_COMMON_ECO_CHICKEN1 when
switching pipelines. Failure to do this properly can result in GPU
hangs.
Unfortunately, this means it needs to switch mid-batch, so only
userspace can properly set it. To facilitate this, the kernel needs
to whitelist the register.
The workarounds page currently tags this as applying to Broxton only,
but that doesn't make sense. The documentation for the register it
references says the bit userspace is supposed to toggle only exists on
Geminilake. Empirically, the Mesa patch to toggle this bit appears to
fix intermittent GPU hangs in tessellation control shader barrier tests
on Geminilake; we haven't seen those hangs on Broxton.
v2: Mention WA #0862 in the comment (it doesn't have a name).
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180105085905.9298-1-kenneth@whitecape.org
(cherry picked from commit ab062639ed)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
commit d6ed935513 ("pinctrl: mediatek: add pinctrl driver for MT7622
SoC") leads to the following static checker warning:
drivers/pinctrl/mediatek/pinctrl-mt7622.c:1419 mtk_gpio_get()
error: uninitialized symbol 'value'.
1412 static int mtk_gpio_get(struct gpio_chip *chip, unsigned int gpio)
1413 {
1414 struct mtk_pinctrl *hw = dev_get_drvdata(chip->parent);
1415 int value;
1416
1417 mtk_hw_get_value(hw, gpio, PINCTRL_PIN_REG_DI, &value);
^^^^^^^^^^^^^^^^
1418
1419 return !!value;
1420 }
The appropriate error handling must be added to avoid the potential error
caused by uninitialized value being returned.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
There is code duplication between uniphier_conf_pin_drive_get() and
uniphier_conf_pin_drive_set(). Factor out the common code into
uniphier_conf_get_drvctrl_data().
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
A headline should be quickly put into a sequence. Thus use the
function "seq_puts" instead of "seq_printf" for this purpose.
This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
On Book3S in HV mode, we don't use the vcpu->arch.dec field at all.
Instead, all logic is built around vcpu->arch.dec_expires.
So let's remove the one remaining piece of code that was setting it.
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
The decode parameters are constant mark them const.
Signed-off-by: Stefan Agner <stefan@agner.ch>
Acked-by: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Now that imx_pinctrl_probe accepts const struct imx_pinctrl_soc_info
we can constify all declarations of struct imx_pinctrl_soc_info.
Signed-off-by: Stefan Agner <stefan@agner.ch>
Acked-by: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Using of_device_get_match_data in imx7d_pinctrl_probe simplifies
the function. Also get rid of the void pointer cast since
imx_pinctrl_probe now accepts const struct imx_pinctrl_soc_info.
Cc: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Stefan Agner <stefan@agner.ch>
Acked-by: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
For some SoCs the struct imx_pinctrl_soc_info is passed through
of_device_id.data which is const. Most variables are already const
or otherwise not written. However, some fields are modified at
runtime. Move those fields to the dynamically allocated struct
imx_pinctrl.
Fixes: b3060044e4 ("pinctrl: freescale: imx7d: make of_device_ids const")
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Arvind Yadav <arvind.yadav.cs@gmail.com>
Cc: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Stefan Agner <stefan@agner.ch>
Acked-by: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The newly added GPIO driver for winbond chipsets causes a
circular dependency warning in Kconfig:
drivers/gpio/Kconfig:13:error: recursive dependency detected!
drivers/gpio/Kconfig:13: symbol GPIOLIB is selected by STX104
drivers/iio/adc/Kconfig:699: symbol STX104 depends on ISA_BUS_API
arch/Kconfig:830: symbol ISA_BUS_API is selected by GPIO_WINBOND
drivers/gpio/Kconfig:701: symbol GPIO_WINBOND depends on GPIOLIB
The underlying problem is that ISA_BUS_API is not meant to be selected by
device drivers, instead it is provided by the architectures that support
ISA add-on card devices, or in case of x86 have this explicitly enabled.
This particular driver appears to be different from the other ISA_BUS_API
based drivers, in that it is not normally an add-on card (ISA or PC104)
but instead is an LPC-attached component on the mainboard. We already
support other functionality provided by this chip, at least
drivers/watchdog/w83627hf_wdt.c and drivers/hwmon/w83627ehf.c, plus
there is a discovery function for this hardware in
drivers/parport/parport_pc.c.
If we want to use this driver without having to enable CONFIG_EXPERT,
it might be better to not use the isa_bus_type for it, but rather
turn it into a platform_driver, acpi_driver or add an MFD for it that
is shared with the wdt and hwmon portions and does the probing.
For now, this patch fixes the dependency by changing 'select' into
'depends on'.
Cc: William Breathitt Gray <vilhelm.gray@gmail.com>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Maciej S. Szmigiero <mail@maciej.szmigiero.name>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Fixes: a0d6500941 ("gpio: winbond: Add driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
- The 'perf test bpf' entry hooked a eBPF proggie to the
SyS_epoll_wait() kernel function and expected it to be hit when calling
the epoll_wait() libc wrapper, which changed recently, in systems such
as Fedora 27, with the glibc wrapper calling instead the epoll_pwait()
syscall, so switch to epoll_pwait() for both the kernel and libc
function, getting it to work both in old and new systems (Arnaldo Carvalho de Melo)
- Beautify 'gettid' syscall result in 'perf trace', and in doing so
noticed that we need to handle namespaces in 'perf trace', will be
dealt with in follow up patches where we'll try to figure out if
the recent support for namespace in tools/perf/ can be used for this
purpose as well. (Arnaldo Carvalho de Melo)
- Introduce 'perf report --mmaps' and 'perf report --tasks' to show
info present in 'perf.data' (Jiri Olsa, Arnaldo Carvalho de Melo)
- Synchronize kernel <-> tooling headers wrt meltdown/spectre changes
(Arnaldo Carvalho de Melo)
- Fix a wrong offset issue when using /proc/kcore (Jin Yao)
- Fix bug that prevented annotating symbols in perf.data files
generated with 'perf record --branch-any' (Jin Yao)
- Add infrastructure to record first and last sample time to the
perf.data file header, so that when processing all samples in
a 'perf record' session, such as when doing build-id processing,
or when specifically requesting that that info be recorded, use
that in 'perf report --time', that also got support for percent
slices in addition to absolute ones.
I.e. now it is possible to ask for the samples in the 10%-20%
time slice of a perf.data file (Jin Yao)
- Enable building with libbabeltrace by default (Jiri Olsa)
- Display perf_event_attr::namespaces when duping the attributes
in verbose mode (Jiri Olsa)
- Allocate context task_ctx_data for child event (Jiri Olsa)
- Update comments for PERF_RECORD_ITRACE_START and PERF_RECORD_MISC_* (Jiri Olsa)
- Add support for showing PERF_RECORD_LOST events in 'perf script' (Jiri Olsa)
- Add 'perf report --stats' option to display quick statistics about
metadata events (PERF_RECORD_*) i.e. what we get at the end of 'perf
report -D' (Jiri Olsa)
- Fix compile error with libunwind x86 (Wang Nan)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----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=Ncst
-----END PGP SIGNATURE-----
Merge tag 'perf-core-for-mingo-4.16-20180110' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core
Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo:
- The 'perf test bpf' entry hooked a eBPF proggie to the
SyS_epoll_wait() kernel function and expected it to be hit when calling
the epoll_wait() libc wrapper, which changed recently, in systems such
as Fedora 27, with the glibc wrapper calling instead the epoll_pwait()
syscall, so switch to epoll_pwait() for both the kernel and libc
function, getting it to work both in old and new systems (Arnaldo Carvalho de Melo)
- Beautify 'gettid' syscall result in 'perf trace', and in doing so
noticed that we need to handle namespaces in 'perf trace', will be
dealt with in follow up patches where we'll try to figure out if
the recent support for namespace in tools/perf/ can be used for this
purpose as well. (Arnaldo Carvalho de Melo)
- Introduce 'perf report --mmaps' and 'perf report --tasks' to show
info present in 'perf.data' (Jiri Olsa, Arnaldo Carvalho de Melo)
- Synchronize kernel <-> tooling headers wrt meltdown/spectre changes
(Arnaldo Carvalho de Melo)
- Fix a wrong offset issue when using /proc/kcore (Jin Yao)
- Fix bug that prevented annotating symbols in perf.data files
generated with 'perf record --branch-any' (Jin Yao)
- Add infrastructure to record first and last sample time to the
perf.data file header, so that when processing all samples in
a 'perf record' session, such as when doing build-id processing,
or when specifically requesting that that info be recorded, use
that in 'perf report --time', that also got support for percent
slices in addition to absolute ones.
I.e. now it is possible to ask for the samples in the 10%-20%
time slice of a perf.data file (Jin Yao)
- Enable building with libbabeltrace by default (Jiri Olsa)
- Display perf_event_attr::namespaces when duping the attributes
in verbose mode (Jiri Olsa)
- Allocate context task_ctx_data for child event (Jiri Olsa)
- Update comments for PERF_RECORD_ITRACE_START and PERF_RECORD_MISC_* (Jiri Olsa)
- Add support for showing PERF_RECORD_LOST events in 'perf script' (Jiri Olsa)
- Add 'perf report --stats' option to display quick statistics about
metadata events (PERF_RECORD_*) i.e. what we get at the end of 'perf
report -D' (Jiri Olsa)
- Fix compile error with libunwind x86 (Wang Nan)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Use correct parameter names and formatting in function kernel-doc notation
to eliminate warnings from scripts/kernel-doc.
../drivers/infiniband/sw/rdmavt/mr.c:784: warning: Excess function parameter 'ibmfr' description in 'rvt_map_phys_fmr'
../drivers/infiniband/sw/rdmavt/vt.c:234: warning: Excess function parameter 'intex' description in 'rvt_query_pkey'
../drivers/infiniband/sw/rdmavt/vt.c:266: warning: Excess function parameter 'index' description in 'rvt_query_gid'
../drivers/infiniband/sw/rdmavt/vt.c:306: warning: Excess function parameter 'data' description in 'rvt_alloc_ucontext'
../drivers/infiniband/sw/rdmavt/cq.c:65: warning: Excess function parameter 'sig' description in 'rvt_cq_enter'
../drivers/infiniband/sw/rdmavt/qp.c:279: warning: Excess function parameter 'qpt' description in 'rvt_free_all_qps'
../drivers/infiniband/sw/rdmavt/mcast.c:282: warning: Excess function parameter 'igd' description in 'rvt_attach_mcast'
../drivers/infiniband/sw/rdmavt/mcast.c:345: warning: Excess function parameter 'igd' description in 'rvt_detach_mcast'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Doug Ledford <dledford@redhat.com>
Cc: Jason Gunthorpe <jgg@mellanox.com>
Cc: linux-doc@vger.kernel.org
Acked-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Use correct parameter name and description in kernel-doc notation to
eliminate a kernel-doc warning.
../drivers/infiniband/ulp/opa_vnic/opa_vnic_vema.c:730: warning: Excess function parameter 'cport' description in 'opa_vnic_vema_send_trap'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Doug Ledford <dledford@redhat.com>
Cc: Jason Gunthorpe <jgg@mellanox.com>
Cc: linux-doc@vger.kernel.org
Acked-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Fix kernel-doc warning for ib_fmr_pool_map_phys() and also format it
with function description and text spacing.
../drivers/infiniband/core/fmr_pool.c:404: warning: Excess function parameter 'pool' description in 'ib_fmr_pool_map_phys'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Doug Ledford <dledford@redhat.com>
Cc: Jason Gunthorpe <jgg@mellanox.com>
Cc: linux-doc@vger.kernel.org
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Change function parameter name in kernel-doc notation and other comments
to eliminate a kernel-doc warning.
../drivers/infiniband/core/verbs.c:1790: warning: Excess function parameter 'wq_init_attr' description in 'ib_create_wq'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Doug Ledford <dledford@redhat.com>
Cc: Jason Gunthorpe <jgg@mellanox.com>
Cc: linux-doc@vger.kernel.org
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The 'if' logic in ucma_query_path was broken with OPA was introduced
and started to treat RoCE paths as as OPA paths. Invert the logic
of the 'if' so only OPA paths are treated as OPA paths.
Otherwise the path records returned to rdma_cma users are mangled
when in RoCE mode.
Fixes: 5752075144 ("IB/SA: Add OPA path record type")
Signed-off-by: Parav Pandit <parav@mellanox.com>
Reviewed-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
rdma_set_ib_path() missed setting path record fields for RoCE
transport when RoCE support was added.
This results in setting incorrect ndev, destination mac address,
incorrect GID type etc errors when user space attempts to set a raw
IB path using the roce IB path compatibility mapping from userspace.
Fixes: 3c86aa70bf ("RDMA/cm: Add RDMA CM support for IBoE devices")
Signed-off-by: Parav Pandit <parav@mellanox.com>
Reviewed-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Since 2006 there has been no user of rdmacm based application to make use
of setting multiple path records using rdma_set_ib_paths API.
Therefore code is simplified to allow setting one path record entry.
Now that it sets only single path, it is renamed to reflect the same.
Signed-off-by: Parav Pandit <parav@mellanox.com>
Reviewed-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Introduce a helper function to set path record L2 fields for RoCE.
This includes setting GID type, destination mac address and netdev
ifindex.
Signed-off-by: Parav Pandit <parav@mellanox.com>
Reviewed-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The net namespace is set in addr during create_rdma_id(),
cma_resolve_iboe_route() should use that instead of the
init namespace.
The original code was added in commit fa20105e09 ("IB/cma: Add support
for network namespaces"), but this path wasn't in use back then.
This patch updates the code to use right namespace, as preparation
for improving namespace support.
Signed-off-by: Parav Pandit <parav@mellanox.com>
Reviewed-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
There is a need to increase number of possible char devices to support
large number of SR-IOV instances. The current limit is in the range of
64-128 devices/ports. Increase it to support up to 1024.
The patch performs the following steps to refactor the code:
1. Removes the split bitmap for fixed and overflow dev numbers.
2. Pre-allocates the non-legacy major number range during driver
initialization, choosen for simplicity.
3. Add new define (RDMA_MAX_PORTS) that is shared between all drivers.
This is the maximum total number of ports on all struct ib_devices.
4. Set RDMA_MAX_PORTS to 1024.
Signed-off-by: Huy Nguyen <huyn@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Remove the locks that protect character device bitmaps of
uverbs, umad and issm.
The character device bitmaps are accessed in "client->add" and
"client->remove" calls from ib_register_device and ib_unregister_device
respectively. These calls are already protected by the "device_mutex"
mutex. Thus, the spinlocks are not needed.
Signed-off-by: Huy Nguyen <huyn@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
No functional changes.
This patch is a re-work of DCMD refire code to better manage all the
different cases to decide whether to REFIRE or SKIP or COMPLETE certain
DCMD.
Signed-off-by: Sumit Saxena <sumit.saxena@broadcom.com>
Signed-off-by: Shivasharan S <shivasharan.srikanteshwara@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Expose FW outstanding commands (fw_outstanding) through sysfs interface.
This helps in debugging certain performance issues in the field.
Signed-off-by: Sasikumar Chandrasekaran <sasikumar.pc@broadcom.com>
Signed-off-by: Shivasharan S <shivasharan.srikanteshwara@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Performance improvement:
Current driver calls stream detection unconditionally for all IOs.
Stream Detection logic is not required for most of the fast path IO. To
improve performance, avoid stream detection logic and do it only if
required.
Below are the cases where stream detection is required in driver:
1. All non-FastPath IOs (IOs going to FW)
2. Fast Path reads sent to ReadAhead capable VDs.
Signed-off-by: Sumit Saxena <sumit.saxena@broadcom.com>
Signed-off-by: Shivasharan S <shivasharan.srikanteshwara@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Issue – There may be some IO accessing incorrect raid map, but driver
has checks in IO path to handle those cases. It is always better to move
to new raid map only once raid map is populated and validated. No
functional defect. Fix is provided as part of review. Fix – Update
instance->map_id after driver has populated new driver raid map from
firmware raid map.
Signed-off-by: Sumit Saxena <sumit.saxena@broadcom.com>
Signed-off-by: Shivasharan S <shivasharan.srikanteshwara@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
In IOCTL path, re-use megasas_wait_for_adapter_operational API to detect
controller state. This will make driver to use this API uniformly in all
cases where we need to wait for adapter to become operational.
Signed-off-by: Sumit Saxena <sumit.saxena@broadcom.com>
Signed-off-by: Shivasharan S <shivasharan.srikanteshwara@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Driver needs to avoid PCI writes while OCR is in progress. Use
reset_mutex to synchronize between firing DCMDs MR_DCMD_PD_GET_INFO and
MR_DCMD_DRV_GET_TARGET_PROP while OCR is triggered. Without this fix,
if Device/VD add/creation is in progress and at the same time MR
Firmware is going through OCR, user may see OCR never completed and it
may need system reboot. This scenario is rare to occur. Fix is provided
as part of review.
Signed-off-by: Sumit Saxena <sumit.saxena@broadcom.com>
Signed-off-by: Shivasharan S <shivasharan.srikanteshwara@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Issue - Driver returns DID_NO_CONNECT when unload is in progress,
indicated using instance->unload flag. In case of dynamic unload of
driver, this flag is set before calling scsi_remove_host(). While doing
manual driver unload, user will see lots of prints for Sync Cache
command with DID_NO_CONNECT status.
Fix - Set the instance->unload flag after scsi_remove_host(). Allow
device removal process to be completed and do not block any command
before that. SCSI commands (like SYNC_CACHE) are received (as part of
scsi_remove_host) by driver during unload will be submitted further down
to the drives.
Signed-off-by: Sumit Saxena <sumit.saxena@broadcom.com>
Signed-off-by: Shivasharan S <shivasharan.srikanteshwara@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Currently driver does not validate ldcount provided by firmware. If the
value is invalid, fail RAID map validation accordingly. This issue is
rare to hit in field and is fixed as part of code review.
Signed-off-by: Sumit Saxena <sumit.saxena@broadcom.com>
Signed-off-by: Shivasharan S <shivasharan.srikanteshwara@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
In megasas_get_seq_num, the status of the DCMD fired to FW is not
returned, it always returns success. We could end up registering AEN
request with incorrect sequence number if the DCMD failed. Return the
DCMD status back to caller. This was discovered during code review and
very rare to see issue in field to see AEN request failed bt FW.
Signed-off-by: Shivasharan S <shivasharan.srikanteshwara@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Commit b9637d14dc ("scsi: megaraid_sas: Resize MFA frame used for IOC
INIT to 4k") increased the size of IOC INIT frame to 4k. Need to use
updated size when memsetting init_frame.
Signed-off-by: Shivasharan S <shivasharan.srikanteshwara@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Memory allocated for IOC_INIT command and stream detection array are not
zero'd before using. Use kzalloc instead of kmalloc to zero out the
memory allocated.
Signed-off-by: Sumit Saxena <sumit.saxena@broadcom.com>
Signed-off-by: Shivasharan S <shivasharan.srikanteshwara@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This patch does not change any functionality but makes the SCSI core
source code slightly easier to read.
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The delay for the rescan worker needs to 10 seconds, missed the HZ in
there.
Fixes: a1367e4ade (scsi: aacraid: Reschedule host scan in case of failure)
Signed-off-by: Raghava Aditya Renukunta <RaghavaAditya.Renukunta@microsemi.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The correct lun count needs to be divided by 24, missed it in the
previous patch set.
Fixes: 4b00022753 (scsi: aacraid: Create helper functions to get lun info)
Signed-off-by: Raghava Aditya Renukunta <RaghavaAditya.Renukunta@microsemi.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
For hardware only supporting active/optimized there's no point in ever
re-issuing RTPG as the only new state we can possibly read is
active/optimized. This avoid spurious errors during path failover on
such arrays.
Signed-off-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Bart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Use the ARRAY_SIZE macro on array __pciids to determine size of the
array. Improvement suggested by coccinelle.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The initialization of d is redundant as this value is never read and it
is overwritten inside the subsequent for-loop. Remove this redundant
assignment.
Cleans up clang warning:
drivers/scsi/qla2xxx/qla_gs.c:3985:29: warning: Value stored to 'd'
during its initialization is never read
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>