Commit graph

932,869 commits

Author SHA1 Message Date
Benjamin Gaignard
8e82df381b clocksource/drivers/stm32: Add oneshot mode
The stm32 timer block is able to have a counter and a comparator.

Instead of using the auto-reload register for periodic events, we switch
to oneshot mode by using the comparator register.

The timer is able to generate an interrupt when the counter overflows but
we don't want that as this counter will be use as a clocksource in the next
patches. So it is disabled by the UDIS bit of the control register.

Tested-by: Benjamin Gaignard <benjamin.gaignard@st.com>
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@st.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Benjamin Gaignard <benjamin.gaignard@st.com>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1515418139-23276-16-git-send-email-daniel.lezcano@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-01-08 17:57:26 +01:00
Benjamin Gaignard
4744daa10d clocksource/drivers/stm32: Compute a prescaler value with a targeted rate
The prescaler value is arbitrarily set to 1024 without any regard to the
timer frequency. For 32-bit timers, there is no need to set a prescaler
value as they wrap in an acceptable interval and give the opportunity to
have precise timers on this platform. However, for 16-bit timers a prescaler
value is needed if we don't want to wrap too often per second which is
inefficient and adds more and more error margin. With a targeted clock
of 10MHz, the 16 bits are precise enough whatever the timer frequency is
as we will compute the prescaler.

Tested-by: Benjamin Gaignard <benjamin.gaignard@st.com>
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@st.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Benjamin Gaignard <benjamin.gaignard@st.com>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1515418139-23276-15-git-send-email-daniel.lezcano@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-01-08 17:57:25 +01:00
Daniel Lezcano
70c62cf910 clocksource/drivers/stm32: Factor out the timer width sorting code
In order to clarify and encapsulate the code for upcoming changes, move the
timer width check into a function and add some documentation.

Tested-by: Benjamin Gaignard <benjamin.gaignard@st.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Benjamin Gaignard <benjamin.gaignard@st.com>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1515418139-23276-14-git-send-email-daniel.lezcano@linaro.org
[ Spelling fixes. ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-01-08 17:57:25 +01:00
Daniel Lezcano
f2ed8ef1ce clocksource/drivers/stm32: Use the node name as timer name
As there are different timers on the stm32, use the node name for the timer
name in order to give the indication of which timer the kernel is using.

/proc/timer_list gives all the information with the right name, otherwise
we end up digging in the kernel log and /proc/interrupt to do the connection
between the used timer.

Tested-by: Benjamin Gaignard <benjamin.gaignard@st.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Benjamin Gaignard <benjamin.gaignard@st.com>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1515418139-23276-13-git-send-email-daniel.lezcano@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-01-08 17:57:25 +01:00
Benjamin Gaignard
d04af4908a clocksource/drivers/stm32: Convert the driver to timer_of primitives
Convert the driver to use the timer_of() helpers. This allows the removal of
a custom private structure, factors out and simplifies the code.

[Daniel Lezcano]: Respin against the critical fix patch and massaged the changelog.

Tested-by: Benjamin Gaignard <benjamin.gaignard@st.com>
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@st.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Benjamin Gaignard <benjamin.gaignard@st.com>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1515418139-23276-12-git-send-email-daniel.lezcano@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-01-08 17:57:25 +01:00
Daniel Lezcano
e0aeca3d8c clocksource/drivers/stm32: Fix kernel panic with multiple timers
The current code hides a couple of bugs:

 - The global variable 'clock_event_ddata' is overwritten each time the
   init function is invoked.

This is fixed with a kmemdup() instead of assigning the global variable. That
prevents a memory corruption when several timers are defined in the DT.

 - The clockevent's event_handler is NULL if the time framework does
   not select the clockevent when registering it, this is fine but the init
   code generates in any case an interrupt leading to dereference this
   NULL pointer.

The stm32 timer works with shadow registers, a mechanism to cache the
registers. When a change is done in one buffered register, we need to
artificially generate an event to force the timer to copy the content
of the register to the shadowed register.

The auto-reload register (ARR) is one of the shadowed register as well as
the prescaler register (PSC), so in order to force the copy, we issue an
event which in turn leads to an interrupt and the NULL dereference.

This is fixed by inverting two lines where we clear the status register
before enabling the update event interrupt.

As this kernel crash is resulting from the combination of these two bugs,
the fixes are grouped into a single patch.

Tested-by: Benjamin Gaignard <benjamin.gaignard@st.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Benjamin Gaignard <benjamin.gaignard@st.com>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/r/1515418139-23276-11-git-send-email-daniel.lezcano@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-01-08 17:57:25 +01:00
Daniel Lezcano
9aea417afa clocksource/drivers/timer-of: Don't request the resource by name
When the driver does not specify a name for the resource, don't use
of_io_request_and_map() but of_iomap(). That prevents resource name allocation
conflicts on some platforms which have the same name as the node.

Tested-by: Benjamin Gaignard <benjamin.gaignard@st.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Benjamin Gaignard <benjamin.gaignard@st.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1515418139-23276-10-git-send-email-daniel.lezcano@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-01-08 17:57:24 +01:00
Daniel Lezcano
1c63c1c089 clocksource/drivers/timer-of: Store the device node pointer in 'struct timer_of'
Under certain circumstances, some specific operations must be done with the
device node pointer, which forces the timer code to propagate the pointer to
the functions which need it.

In order to consolidate the function signatures in the different drivers
by using the timer-of structure, let's store it in the timer-of structure
as a handy pointer when it is needed.

Tested-by: Benjamin Gaignard <benjamin.gaignard@st.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Benjamin Gaignard <benjamin.gaignard@st.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1515418139-23276-9-git-send-email-daniel.lezcano@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-01-08 17:57:24 +01:00
Baolin Wang
067bc91447 clocksource/drivers/spreadtrum: Add timer driver for the Spreadtrum SC9860 platform
The Spreadtrum SC9860 platform will use the architected timers as local
clock events, but we also need a broadcast timer device to wake up the
CPUs when the CPUs are in sleep mode.

The Spreadtrum timer can support 32-bit or 64-bit counters, as well as
supporting period mode or one-shot mode.

Signed-off-by: Baolin Wang <baolin.wang@spreadtrum.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Philippe Ombredanne <pombredanne@nexb.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1515418139-23276-8-git-send-email-daniel.lezcano@linaro.org
[ Minor readability edits. ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-01-08 17:57:24 +01:00
Baolin Wang
286f30db8b dt-bindings/clocksource: Add Spreadtrum SC9860 timer documentation
This patch adds documentation of device tree bindings for the timers
found on the Spreadtrum SC9860 platform.

Signed-off-by: Baolin Wang <baolin.wang@spreadtrum.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: devicetree@vger.kernel.org
Link: http://lkml.kernel.org/r/1515418139-23276-7-git-send-email-daniel.lezcano@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-01-08 17:57:24 +01:00
Daniel Lezcano
cf7f46b9b1 clocksource/drivers/timer-of: Add kernel documentation
The current code has no comments, neither any function descriptions. Fix this by
adding function descriptions in kernel doc format.

Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1515418139-23276-6-git-send-email-daniel.lezcano@linaro.org
[ Spelling and style fixes. ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-01-08 17:57:23 +01:00
Daniel Lezcano
5bbf4ad945 clocksource/drivers/timer-of: Fix function names
All the functions are not prefixed with 'timer_of_', fix the naming in order
to have the code consistent.

Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1515418139-23276-5-git-send-email-daniel.lezcano@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-01-08 17:57:23 +01:00
Romain Izard
542f824607 clocksource/drivers/tcb_clksrc: Fix clock speed message
The clock speed displayed at boot in an information message was 500 kHz
too high compared to its real value. As the value is not used anywhere,
there is no functional impact.

Fix the rounding formula to display the correct value.

Signed-off-by: Romain Izard <romain.izard.pro@gmail.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1515418139-23276-4-git-send-email-daniel.lezcano@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-01-08 17:57:23 +01:00
Andreas Färber
0ec5477c3e clocksource/drivers/owl: Add the S700 timer
Actions S700 has two 2Hz timers like S500, and four TIMx timers like S900.

Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1515418139-23276-3-git-send-email-daniel.lezcano@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-01-08 17:57:23 +01:00
Andreas Färber
f58639ac29 clocksource/drivers/owl: Adopt TIMER_OF_DECLARE()
The following commit:

  1727339590 ("clocksource/drivers: Rename CLOCKSOURCE_OF_DECLARE to TIMER_OF_DECLARE")

deprecated CLOCKSOURCE_OF_DECLARE(), so adopt the new TIMER_OF_DECLARE() macro instead.

Reported-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1515418139-23276-2-git-send-email-daniel.lezcano@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-01-08 17:57:23 +01:00
Andreas Färber
f3074a2825 dt-bindings/clocksource: Add Actions Semi S700 timer
Define a compatible string for the Actions Semi S700 SoC timer.

Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: devicetree@vger.kernel.org
Link: http://lkml.kernel.org/r/1515418139-23276-1-git-send-email-daniel.lezcano@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-01-08 17:57:22 +01:00
Wei Yongjun
80cd8f0175 soundwire: Fix typo in return value check of sdw_read()
Fix the typo, 'status' should be instead of 'status2'.

Fixes: b0a9c37b01 ("soundwire: Add slave status handling")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Acked-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-08 17:53:21 +01:00
Colin Ian King
7094dc2b53 soundwire: intel: fix missing assignment to ret
Currently the return status ret is being checked but it has not been
updated since the previous check on ret. It appears that assignment of
ret from return status of the call to sdw_cdns_enable_interrupt was
accidentally ommited.  Fix this.

Detected by CoverityScan, CID#1463148 ("Logically dead code")

Fixes: 71bb8a1b05 ("soundwire: intel: Add Intel Master driver")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-08 17:53:21 +01:00
Colin Ian King
0132af05fc soundwire: fix sign extension when shifting buf[2] 24 places
The buf[2] left shift by 24 bits is promoted to int (32 bit signed)
and then signed-extended to unsigned long long. Hence if the upper
bit to buf[2] is set then all the upper bits of addr end up as 1.
Fix this by casting it to u64 before shifting it. Also replace the
unsigned long long casts to u64 casts to match the same type of
addr.

Detected by CoverityScan, CID#1463147 ("Unintended sign extension")

Fixes: d52d7a1be0 ("soundwire: Add Slave status handling helpers")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-08 17:53:20 +01:00
Jike Song
8d56eff266 x86/mm/pti: Remove dead logic in pti_user_pagetable_walk*()
The following code contains dead logic:

 162 if (pgd_none(*pgd)) {
 163         unsigned long new_p4d_page = __get_free_page(gfp);
 164         if (!new_p4d_page)
 165                 return NULL;
 166
 167         if (pgd_none(*pgd)) {
 168                 set_pgd(pgd, __pgd(_KERNPG_TABLE | __pa(new_p4d_page)));
 169                 new_p4d_page = 0;
 170         }
 171         if (new_p4d_page)
 172                 free_page(new_p4d_page);
 173 }

There can't be any difference between two pgd_none(*pgd) at L162 and L167,
so it's always false at L171.

Dave Hansen explained:

 Yes, the double-test was part of an optimization where we attempted to
 avoid using a global spinlock in the fork() path.  We would check for
 unallocated mid-level page tables without the lock.  The lock was only
 taken when we needed to *make* an entry to avoid collisions.
 
 Now that it is all single-threaded, there is no chance of a collision,
 no need for a lock, and no need for the re-check.

As all these functions are only called during init, mark them __init as
well.

Fixes: 03f4424f34 ("x86/mm/pti: Add functions to clone kernel PMDs")
Signed-off-by: Jike Song <albcamus@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Alan Cox <gnomes@lxorguk.ukuu.org.uk>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Jiri Koshina <jikos@kernel.org>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Kees Cook <keescook@google.com>
Cc: Andi Lutomirski <luto@amacapital.net>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Greg KH <gregkh@linux-foundation.org>
Cc: David Woodhouse <dwmw@amazon.co.uk>
Cc: Paul Turner <pjt@google.com>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20180108160341.3461-1-albcamus@gmail.com
2018-01-08 17:42:13 +01:00
Ingo Molnar
527187d285 locking/lockdep: Remove cross-release leftovers
There's two cross-release leftover facilities:

 - the crossrelease_hist_*() irq-tracing callbacks (NOPs currently)
 - the complete_release_commit() callback (NOP as well)

Remove them.

Cc: David Sterba <dsterba@suse.com>
Cc: Byungchul Park <byungchul.park@lge.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-01-08 17:30:45 +01:00
Linus Walleij
c858233902 gpio: of: Support SPI nonstandard GPIO properties
Before it was clearly established that all GPIO properties in the
device tree shall be named "foo-gpios" (with the deprecated variant
"foo-gpio" for single lines) we unfortunately merged a few bindings
which named the lines "gpio-foo" instead.

This is most prominent in the GPIO SPI driver in Linux which names
the lines "gpio-sck", "gpio-mosi" and "gpio-miso".

As we want to switch the GPIO SPI driver to using descriptors, we
need devm_gpiod_get() to return something reasonable when looking
up these in the device tree.

Put in a special #ifdef:ed kludge to do this special lookup only
for the SPI case and gets compiled out if we're not enabling SPI.
If we have more oddly defined legacy GPIOs like this, they can be
handled in a similar manner.

Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-01-08 17:29:25 +01:00
Dave Hansen
262b6b3008 x86/tboot: Unbreak tboot with PTI enabled
This is another case similar to what EFI does: create a new set of
page tables, map some code at a low address, and jump to it.  PTI
mistakes this low address for userspace and mistakenly marks it
non-executable in an effort to make it unusable for userspace.

Undo the poison to allow execution.

Fixes: 385ce0ea4c ("x86/mm/pti: Add Kconfig")
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Alan Cox <gnomes@lxorguk.ukuu.org.uk>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Jon Masters <jcm@redhat.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Jeff Law <law@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Greg Kroah-Hartman <gregkh@linux-foundation.org>
Cc: David" <dwmw@amazon.co.uk>
Cc: Nick Clifton <nickc@redhat.com>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20180108102805.GK25546@redhat.com
2018-01-08 17:29:18 +01:00
David Sterba
dba04eb76d locking/Documentation: Remove stale crossrelease_fullstack parameter
The cross-release lockdep functionality has been removed in:

   e966eaeeb6: ("locking/lockdep: Remove the cross-release locking checks")

... leaving the kernel parameter docs behind. The code handling
the parameter does not exist so this is a plain documentation change.

Signed-off-by: David Sterba <dsterba@suse.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: byungchul.park@lge.com
Cc: linux-doc@vger.kernel.org
Link: http://lkml.kernel.org/r/20180108152731.27613-1-dsterba@suse.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-01-08 17:29:17 +01:00
Vinod Koul
8fca15839c
ASoC: Intel: kconfig: drop boiler plate text from config items
Drop "Intel ASoC SST driver for " platforms and "SOC Machine Audio driver
for Intel" for machines..

Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-08 16:20:14 +00:00
Vinod Koul
8967106111
ASoC: Intel: kconfig: add some comments for if symbols
Help in finding matching "if" endings by commenting the "endif".

Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-08 16:20:10 +00:00
Pierre-Louis Bossart
969eaef771
ASoC: Intel: boards: align/fix SKL/BXT/KBL Kconfigs
No reason why SND_SOC_INTEL_SST should be set here.
Also make sure same dependencies are used everywhere (only last one has SPI
in addition). Replace X86_INTEL_LPSS by MFD_INTEL_LPSS since the former
makes no sense for Skylake+ devices

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-By: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-08 16:20:06 +00:00
Pierre-Louis Bossart
99644597d7
ASoC: Intel: boards: align Kconfig configurations for HiFi2
Make sure all the configs are aligned
Also add the missing dependencies on SOC_ACPI stuff used to fix
DAI names based on HID and fix a couple of indentation issues

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-By: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-08 16:20:01 +00:00
Pierre-Louis Bossart
043f5a0b8d
ASoC: Intel: boards: align Kconfig dependencies for Haswell/Broadwell
Make sure that the same I2C/I2C_DESIGNWARE_PLATFORM are selected.
The latter might actually need to be moved to the SOC side of things,
it really has no place in a machine driver dependency

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-By: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-08 16:19:57 +00:00
Pierre-Louis Bossart
f3f2bb7a0e
ASoC: Intel: Fix nested/unnecessary Kconfig dependencies
This patch fixes a number of issues:
1. IOSF_MBI is only needed for byt-cr detection, which is only supported
on Baytrail/Cherrytrail, move to HiFi2 config

2. SND_SOC_INTEL_SST should not select SND_SOC_INTEL_SST_ACPI, the latter
config is only valid for Haswell/Baytrail legacy but not needed by Skylake

3. SND_SST_IPC_ACPI, used only by the atom/sst driver, should not select
SND_SOC_INTEL_SST, none of the code under common/sst*.c is used

This nesting of configs really makes no sense, it's easier to maintain
if for each platform one can control what is strictly required.

Compiled-tested with each of Haswell, Baytrail legacy, HiFi2, SKL cases
selected independently. 0-day and explicit randconfig tests did not report
additional issues and no functionality loss was observed in Intel tests on
HIFI2 and SKYLAKE platforms

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-By: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-08 16:19:53 +00:00
Pierre-Louis Bossart
def2c4284f
ASoC: Intel: document what Kconfig options do
Document in comments what the options are supposed to mean, before
clean-up in next patch.

No functionality change here.

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-By: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-08 16:19:49 +00:00
Pierre-Louis Bossart
4772c16ede
ASoC: Intel: Kconfig: Simplify-clarify ACPI/PCI dependencies
PCI/ACPI selections should not happen in Kconfig for machine drivers,
move to SOC selections.

Add distinction between PCI and ACPI HiFi2 platforms and help text.

There should be no functionality change.

The PCI-based platforms may be removed at some point since Medfield
is not really supported by anyone, and with Edison now defunct support for
Merrifield/Edison is to be determined.

The dependency on SND_DMA_SGBUF for Haswell is not clear at this
point and may have to be further updated.

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-By: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-08 16:19:44 +00:00
Pierre-Louis Bossart
c6059879be
ASoC: Intel: Fix Kconfig with top-level selector
Follow network example suggested by Linus, move Intel definitions
in if/endif block and clarify in help text which options distro
configurations should enable - everything except legacy Baytrail stuff and
NOCODEC (test only)

To avoid user confusion, machine drivers are handled with a submenu made
dependent on this top-level selector.

There should be no functionality change - except that sound capabilities
are restored when using older configs without any user selection.

Note that the SND_SOC_ACPI_INTEL_MATCH config is currently filtered
out by the top-level selector. This will change in the near future to
allow for this option to be selected by both SST and SOF drivers

(simplification with submenu for machine drivers by Vinod Koul)

Fixes: f6a118a800 ("ASoC: Intel: clarify Kconfig dependencies")
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-08 16:18:48 +00:00
John Keeping
c66234cfed
ASoC: rockchip: i2s: fix playback after runtime resume
When restoring registers during runtime resume, we must not write to
I2S_TXDR which is the transmit FIFO as this queues up a sample to be
output and pushes all of the output channels down by one.

This can be demonstrated with the speaker-test utility:

	for i in a b c; do speaker-test -c 2 -s 1; done

which should play a test through the left speaker three times but if the
I2S hardware starts runtime suspended the first sample will be played
through the right speaker.

Fix this by marking I2S_TXDR as volatile (which also requires marking it
as readble, even though it technically isn't).  This seems to be the
most robust fix, the alternative of giving I2S_TXDR a default value is
more fragile since it does not prevent regcache writing to the register
in all circumstances.

While here, also fix the configuration of I2S_RXDR and I2S_FIFOLR; these
are not writable so they do not suffer from the same problem as I2S_TXDR
but reading from I2S_RXDR does suffer from a similar problem.

Fixes: f0447f6cbb ("ASoC: rockchip: i2s: restore register during runtime_suspend/resume cycle", 2016-09-07)
Signed-off-by: John Keeping <john@metanate.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org
2018-01-08 16:06:05 +00:00
Pierre-Louis Bossart
ea39bdcf22
ASoC: Intel: bytcr-rt5651: add support for Line In
Add the DAPM widgets and routes.

Tested with MinnowMax Turbot + rt5651 eval board with Speaker
(LineOut) -> LineIn loopback

Thanks to Bard Liao @ Realtek for providing the 0dB settings

"IN Capture Volume" = 23
"ADC Capture Volume" = 47
"OUT Playback Volume" = 31
"DAC1 Playback Volume" = 175

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Acked-By: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-08 16:02:56 +00:00
Pierre-Louis Bossart
416f2b5111
ASoC: Intel: bytcr-rt5651: enable MinnowBoard Turbot quirks
Define DMI quirk for rt5651 eval board connected to MinnowBoard
Turbot. The only difference with a MinnowBoard MAX is that the MCLK
pin is enabled on the LSE connector

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Tested-by: Keqiao.Zhang <Keqiao.zhang@intel.com>
Acked-By: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-08 16:01:50 +00:00
Keyon Jie
60e3b52e93
ASoC: Intel: bytcr-rt5651: add quirk for IN3P which may also be used
On Minnowboard Max with Realtek rt5651 eval board, the IN3P is
connected to Headset Mic.

Here add and select it for Minnowboard Max.

Signed-off-by: Keyon Jie <yang.jie@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Acked-By: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-08 16:01:43 +00:00
Pierre-Louis Bossart
56e49aa41d
ASoC: Intel: bytcr_rt5651: fix Kiano DMI quirk
The current code doesn't enable the MCLK which reduces audio quality
(PLL driven from BLCK), fix the quirk

Tested-by: Carlo Caione <carlo@caione.org>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Acked-By: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-08 16:01:25 +00:00
Christophe JAILLET
25f3fd043e
ASoC: Intel: sst: Fix some style
This patch fixes 3 small issues:
 - missing 2nd '*' at the beginning of a doxygen comment
 - extra space after a '\n' in a dev_dbg message
 - extra tab before a 'return" statement

Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-08 15:57:56 +00:00
Christophe JAILLET
eaadb1caa9
ASoC: Intel: sst: Fix the return value of 'sst_send_byte_stream_mrfld()'
In some error handling paths, an error code is assiegned to 'ret'.
However, the function always return 0.

Fix it and return the error code if such an error paths is taken.

Fixes: 3d9ff34622 ("ASoC: Intel: sst: add stream operations")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-08 15:57:55 +00:00
Israel Rukshin
b837b28394 nvme: fix subsystem multiple controllers support check
There is a problem when another module (e.g. nvmet) takes a reference on
the nvme block device and the physical nvme drive is removed.  In that
case nvme_free_ctrl() will not be called and the controller state will be
"deleting" or "dead" unless nvmet module releases the block device.
Later on, the same nvme drive probes back and nvme_init_subsystem() will
be called and fail due to duplicate subnqn (if the nvme device doesn't
support subsystem with multiple controllers). This will cause a probe
failure.  This commit changes the check of multiple controllers support
at nvme_init_subsystem() by not counting all the controllers at "dead" or
"deleting" state (this is safe because controllers at this state will
never be active again).

Fixes: ab9e00cc72 ("nvme: track subsystems")
Reviewed-by: Max Gurtovoy <maxg@mellanox.com>
Signed-off-by: Israel Rukshin <israelr@mellanox.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2018-01-08 16:57:00 +01:00
Nitzan Carmi
85088c4a0f nvme: take refcount on transport module
The block device is backed by the transport so we must ensure that the
transport driver will not be removed until all references are released.
Otherwise, we might end up referencing freed memory.

Reviewed-by: Max Gurtovoy <maxg@mellanox.com>
Signed-off-by: Nitzan Carmi <nitzanc@mellanox.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2018-01-08 16:56:57 +01:00
Pierre-Louis Bossart
845ab40092
ASoC: acpi: add missing includes for non-ACPI platforms
0-day reports compilation issues with non-ACPI platforms.

In file included from sound/soc/soc-acpi.c:17:0:
>> include/sound/soc-acpi.h:36:46: error: 'ACPI_ID_LEN' undeclared here
(not in a function); did you mean 'ACPI_FILE'?
    snd_soc_acpi_find_name_from_hid(const u8 hid[ACPI_ID_LEN])

 sound/soc/soc-acpi.c: At top level:
>> sound/soc/soc-acpi.c:174:16: error: expected declaration specifiers or
'...' before string constant
    MODULE_LICENSE("GPL v2");

Add missing include files.

Fixes: 7feb2f786a ("ASoC: move ACPI common code out of Intel/sst tree")
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-By: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-08 15:56:34 +00:00
Jeremy Cline
0d5ea120ab
ASoC: Replace snd_soc_acpi_check_hid with acpi_dev_present
Replace snd_soc_acpi_check_hid() with the generic acpi_dev_present()
and remove the now unused snd_soc_acpi_check_hid function. This should
have no functional change.

Signed-off-by: Jeremy Cline <jeremy@jcline.org>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-08 15:55:16 +00:00
Mark Brown
498495dba2
Merge branch 'fix/intel' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into asoc-intel 2018-01-08 15:54:50 +00:00
Andy Shevchenko
f4d0ad1f27 scsi: hpsa: Use vsnprintf extension %phN
Using this extension reduces the object size.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Don Brace <don.brace@microsemi.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-01-08 10:53:39 -05:00
Shubham Kumaram
4305059627 Staging: gs_fpgaboot: remove FSF's mailing address from io.h
This patch removes FSF's mailing address issue from io.h found by
checkpatch.pl tool.

Signed-off-by: Shubham Kumaram <shubhamkumaram@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-08 16:47:23 +01:00
Marcelo Guzmán Lamperti
2c4a97b44f staging: sm750fb: Remove multiple blank lines
Remove multiple blank lines. Issue found by checkpatch.

Signed-off-by: Marcelo Guzmán Lamperti <marcelo.guzman.lamperti@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-08 16:47:23 +01:00
Ioana Radulescu
7ec0596f89 staging: fsl-dpaa2/eth: Use affine DPIO services
Use the newly added DPIO service API to map cpu-affine DPIO services
to channels.

The DPAA2 Ethernet driver already had mappings of frame queues and
channels to cpus, but had no control over the DPIOs used. We can
now ensure full affinity of hotpath hardware resources to cores,
which improves performance and almost eliminates some resource
contentions (e.g. enqueue/dequeue busy counters should be close to
zero from now on).

Making the pull channel operation core affine brings the most
significant benefits. This ensures the same DPIO service will be
used for all dequeue commands issued for a certain frame queue,
which is in line with the way hardware is optimized.

Additionally, we also use affine DPIOs for the frame enqueue and
buffer release operations in order to avoid resource contention.
dpaa2_io_service_register() and dpaa2_io_service_rearm()
functions receive an affine DPIO as argument mostly for uniformity,
but this doesn't change the previous functionality.

Signed-off-by: Ioana Radulescu <ruxandra.radulescu@nxp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-08 16:47:23 +01:00
Ioana Radulescu
1f4953836a staging: fsl-mc/dpio: Add dpaa2_io_service_select() API
All DPIO service API functions receive a dpaa2_io service pointer
as parameter (NULL meaning any service will do) which indicates
the hardware resource to be used to execute the specified command.

There isn't however any available API for obtaining such a service
reference that could be used further, effectively forcing the users
to always request a random service for DPIO operations.
(The DPIO driver holds internally an array mapping services to cpus,
and affine services can be indirectly requested by a couple of API
functions: dpaa2_io_service_register and dpaa2_io_service_rearm
use the cpu id provided by the user to select the corresponding
service)

This patch adds a function for selecting a DPIO service based on
the specified cpu id. If the user provides a "don't care" value
for the cpu, we revert to the default behavior and return the next
DPIO, taken in a round-robin fashion from a list of available
services.

Signed-off-by: Ioana Radulescu <ruxandra.radulescu@nxp.com>
Acked-by: Roy Pledge <roy.pledge@nxp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-08 16:47:23 +01:00