Commit graph

932,869 commits

Author SHA1 Message Date
Arnaldo Carvalho de Melo
6703c9771d perf test bpf: Improve message about expected samples
When failing on one of the BPF tests we were just stating:

  BPF filter result incorrect

Add some more info to help figuring out the problem:

 BPF filter result incorrect, expected 56, got 0 samples

This came out while investigating this failure, first seen after
updating the kernel to the 4.15.0-rc6 tag:

  [root@jouet ~]# perf test bpf
  39: BPF filter               :
  39.1: Basic BPF filtering    : FAILED!
  39.2: BPF pinning            : Skip
  39.3: BPF prologue generation: Skip
  39.4: BPF relocation checker : Skip
  [root@jouet ~]#

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-403npu7daupv6b2bmxliv5pk@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-01-08 11:11:56 -03:00
Tejun Heo
40c17f75df workqueue: allow WQ_MEM_RECLAIM on early init workqueues
Workqueues can be created early during boot before workqueue subsystem
in fully online - work items are queued waiting for later full
initialization.  However, early init wasn't supported for
WQ_MEM_RECLAIM workqueues causing unnecessary annoyances for a subset
of users.  Expand early init support to include WQ_MEM_RECLAIM
workqueues.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Paul McKenney <paulmck@linux.vnet.ibm.com>
2018-01-08 05:38:37 -08:00
Tejun Heo
983c751532 workqueue: separate out init_rescuer()
Separate out init_rescuer() from __alloc_workqueue_key() to prepare
for early init support for WQ_MEM_RECLAIM.  This patch doesn't
introduce any functional changes.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Paul McKenney <paulmck@linux.vnet.ibm.com>
2018-01-08 05:38:32 -08:00
Greg Kroah-Hartman
24d142d5be Update extcon for 4.16
Detailed description for this pull request:
 1. Add support to notify USB connector for "ChromeOS Embedded Controller".
 - extcon-usbc-cros-ec driver detects the EXTCON_USB and EXTCON_USB_HOST
   connector type and then notify the state/properties to the consumer device.
 
 2. Update the detection on probe time and clean-up code for "X-Power AXP288".
 - Detect the state of connector after a couple of seconds after probe()
   becasue extcon-axp288.c driver depends on other device driver like mux.
   In order to guarantee the correct state, the extcon-axp288.c uses the
   delayed_work.
 - Set EXTCON_CHG_USB_SDP type as the safe default type if unknown connector
   is attached because the data sheet of axp288 doesn't handle
   the all exception cases.
 - Remove unused code
 
 3. Fix the minor issue of extcon driver
 - Fix platform get_irq's error checking for extcon-adc-jack.
 - Delete unneeded initialization for extcon-max8997/max77693.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJaTDptAAoJEJzN3yze689T4X8P/j2u++jk/fxob0RSNzu0obbJ
 GZwEIrFiUmqOHoDX8cJhG5s1KQMRMzIKv3rqLgJtR4UxcFOWL+rrsJclYUfOWeCp
 DsmJ4HHBozRL/XhF5UWxw0VZYnHfCZP2aLjIuUTMgSb7yMaluRgAhKB5ZE7TtdD9
 Z0BX9KBT9qbqDXkZwxJX78jksN2OapPOMaVrbEHZ2bJpa5OlwIh0dcgwR31qJ7nR
 ZKuv9IDkv/uQIzy5foTDiWUjDsydUJBxia518S95XXN8ehIUilF+xpTGe2/iKOgb
 Wqr8zdZZlgqI8cnC785H2kOg3ehWjV9YnjhmhvI/xxxoR59kMmCsRooTuZrcG8LU
 t/A5nwL3McjRejorLPA5BoOPE4UaLKeAyfI+7xG8r92UiHcEucewclUqYAmZLrUT
 ZiwWCr/6WYYsSgFAIW8ZgVBzSGnmZhIb5QgnvcYSs2k6X1sr2q5zUXgWXMJ8sGF5
 HJzYJEJJeaurWk3xYv9jnCoKj8HF5SnBVaLr+L6aMVT0CDJFkCFnOJRD8Lviuzi6
 jvsZ9g4NOL4EoInS4hMhaE8DjnKRhLNO9fRl0fUVfZrHqYRiQ/W8EvIFB/XKvdhc
 j+UHFT1TfKxHrinuJb50xuiWcUEdMylz42VRJq5WzbHvSlbGRsBgu1bkWTwB1h9D
 k/1kD8gQyDV6oc5afSA1
 =bVYG
 -----END PGP SIGNATURE-----

Merge tag 'extcon-next-for-4.16' of git://git.kernel.org/pub/scm/linux/kernel/git/chanwoo/extcon into char-misc-next

Chanwoo writes:

Update extcon for 4.16

Detailed description for this pull request:
1. Add support to notify USB connector for "ChromeOS Embedded Controller".
- extcon-usbc-cros-ec driver detects the EXTCON_USB and EXTCON_USB_HOST
  connector type and then notify the state/properties to the consumer device.

2. Update the detection on probe time and clean-up code for "X-Power AXP288".
- Detect the state of connector after a couple of seconds after probe()
  becasue extcon-axp288.c driver depends on other device driver like mux.
  In order to guarantee the correct state, the extcon-axp288.c uses the
  delayed_work.
- Set EXTCON_CHG_USB_SDP type as the safe default type if unknown connector
  is attached because the data sheet of axp288 doesn't handle
  the all exception cases.
- Remove unused code

3. Fix the minor issue of extcon driver
- Fix platform get_irq's error checking for extcon-adc-jack.
- Delete unneeded initialization for extcon-max8997/max77693.
2018-01-08 14:33:08 +01:00
Greg Kroah-Hartman
f1faf88c13 phy: for 4.16
*) Fix in exynos5-usbdrd to enumerate SuperSpeed devices on Odroid XU3
  *) Fix in Broadcom USB PHY to get Dell Low Speed keyboards working
  *) Fix in Broadcom USB PHY to power down the PHY when XHCI disabled
     to save power
  *) Fix in Broadcom USB PHY to prevent abort in DRD mode
  *) Fix in Broadcom USB PHY to use the correct dt properties
  *) Fix in Mediatek PHY to detect device connection
  *) Make getting resource optional for Mediatek V1 TPHY
  *) Cleanup in Mediatek PHY
 
 Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJaSzimAAoJEA5ceFyATYLZrCUP/3f02fVtkF+OAL3e+ZwgCWy/
 xoGIHffTcrYFimPeHh7INbeA16o2qNcN8JxJqQFFpZtZIoBR60az6ql7P2CZomXv
 Z4S8ftKl8cOEI6O6AmLgRFuxaHSG24IxD54rHwCa6bDAoq36VnHM2CG+EEB6Yd3M
 4eYoS1hQuwFCKeWSmHo4Uq8zyvTwIaxfKhOBlonXZu3/Tt34ZR0sGr3FC2OIamTN
 Isrx/BsdHsfg+mTElos9jnc5/Uhwy/r7JFmRotn06cWGw2EGoM6EOXBrp3WXHD/f
 jQnSSP3ZKmDvq0zY7QywXVo+fVWddZYx3fsbd26A5bUsarcj2VWlbHWyAWtYty3N
 HOuucYbMHSXTFxP/0j6pwONzQIIucisGgNdUc4Zc7nzwcF8A/BWrEMkGqZLit45q
 NalvVz/+lk0be3zZngm/vbaztHbHMQDvKe0U5QbHH9h47MybmydocrPgs7JbDcFd
 P0vHJ1be5CMItcElC0w+fkrRf3tk5IYQb4nZFDaTRSiuLU+S+mgLfYjbGH4lXtnQ
 USsGRv827wFqQVEzay2WvazvviBautoneh2+YDMg7R1cSOh9kQkunPl9ePOig/DR
 Cgy1MEZH8GZIIhIOBshnLQ2FiQbtnn0NkDTOajLNyJssFbE+9XXYKJr/cUvCOArP
 W9GjMMvI06gI7T+sDylY
 =f9so
 -----END PGP SIGNATURE-----

Merge tag 'phy-for-4.16' of git://git.kernel.org/pub/scm/linux/kernel/git/kishon/linux-phy into usb-next

Kishon writes:

phy: for 4.16

 *) Fix in exynos5-usbdrd to enumerate SuperSpeed devices on Odroid XU3
 *) Fix in Broadcom USB PHY to get Dell Low Speed keyboards working
 *) Fix in Broadcom USB PHY to power down the PHY when XHCI disabled
    to save power
 *) Fix in Broadcom USB PHY to prevent abort in DRD mode
 *) Fix in Broadcom USB PHY to use the correct dt properties
 *) Fix in Mediatek PHY to detect device connection
 *) Make getting resource optional for Mediatek V1 TPHY
 *) Cleanup in Mediatek PHY

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2018-01-08 14:17:59 +01:00
Greg Kroah-Hartman
958e052c54 usb: changes for v4.16 merge window
Not many changes here, the most important being an improvement for TI's
 AM57xx and DRA7xx devices which allows them to disable a metastability
 workaround in situations where we know what's going on.
 
 Other than that, we have a set of changes on Renesas UDC to make the
 code a little easier to read and maintain while also better supporting
 extcon framework.
 
 The u_serial adaptation layer learned to use kfifo instead of cooking
 its own FIFO implementation.
 
 DWC3 learned to decode a few more USB requests on the trace output.
 -----BEGIN PGP SIGNATURE-----
 
 iQJQBAABCgA7FiEElLzh7wn96CXwjh2IzL64meEamQYFAlpTWGYdHGZlbGlwZS5i
 YWxiaUBsaW51eC5pbnRlbC5jb20ACgkQzL64meEamQYDsw/4jOBzuVM2A28oCDzd
 H9RCagGp4dXpdvLRpueE+L16AA/5MrAI1H1Tdp063Xr+CmlPeMf98JRI5tfBpfn5
 8bE6yTojMfvb7vL82kjrnKwKh59IvKVLlFftPBIGJp1uKl5KwWUWMWRcvnpVJHdY
 SlZ0U79Pje7RBuq0BkBQ9Lm47pPm5sMqzCyyte4wZbR+6GkAA5W0PBuRes0JLBHo
 gUb9h5ns5afrxEdvzUXKpVpd++oP/ZLoZ++jYJ10Z5qSC8+y0DiwRxq7OdOSil+c
 BEMKe7I46tGzDFZ2wuMQByHWqCXp7o+9VSf5BYxyP1L58qH1N7M7GyH0Oe+r5xAi
 tjFrnL0C8Ax+ouaXLBfmFzv/52BjEqGoqtscWZ4XyVqq98NC1bP5b+qVmIkzXkdv
 P7T2lOFZX0ILDX7QXIQbXv71UA/m3bwi3IG0eNX5Rik5xQjDVHnLDpuj87wW1wSH
 aUg7sHpggn6GdOICHw9Zry3Z07u3Rab8ThuH0Z4oBI2+3EGhbXTHDjpKYwFYCWEw
 nI+9XloOdEkOE6P3S2VO1cQ7YkJ+r4/YRDRvPq3XfLETfxPHwIjqiVeSQWaBA2U8
 Om4f/1Oe83jtpfl1T7zL2z08TVPDNMOpE2j4FThA682Pa15emqymRXGDgDmFVizO
 boMiMHcP8Wp0MMegK/3RL4syrg==
 =uwh/
 -----END PGP SIGNATURE-----

Merge tag 'usb-for-v4.16' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-next

Felipe writes:

usb: changes for v4.16 merge window

Not many changes here, the most important being an improvement for TI's
AM57xx and DRA7xx devices which allows them to disable a metastability
workaround in situations where we know what's going on.

Other than that, we have a set of changes on Renesas UDC to make the
code a little easier to read and maintain while also better supporting
extcon framework.

The u_serial adaptation layer learned to use kfifo instead of cooking
its own FIFO implementation.

DWC3 learned to decode a few more USB requests on the trace output.
2018-01-08 14:03:30 +01:00
Thierry Reding
5467a8b8da drm/tegra: dc: Restore YUV overlay support
Commit ebae8d0743 ("drm/tegra: dc: Implement legacy blending") broke
support for YUV overlays by accident. The reason is that YUV formats are
considered opaque because they have no alpha component, but on the other
hand no corresponding format with an alpha component can be returned. In
the case of YUV formats, the opaque format is the same as the alpha
format, so add the special case to restore YUV overlay support.

Reported-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2018-01-08 13:44:17 +01:00
Dhaval Shah
cee8113a29 soc: xilinx: xlnx_vcu: Add Xilinx ZYNQMP VCU logicoreIP init driver
Xilinx ZYNQMP logicoreIP Init driver is based on the new
LogiCoreIP design created. This driver provides the processing system
and programmable logic isolation. Set the frequency based on the clock
information get from the logicoreIP register set.

Signed-off-by: Dhaval Shah <dshah@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-01-08 13:42:47 +01:00
Dhaval Shah
b7511552f9 dt-bindings: soc: xilinx: Add DT bindings to xlnx_vcu driver
Add Device Tree binding document for logicoreIP. This logicoreIP
provides the isolation between the processing system and
programmable logic. Also provides the clock related information.

Signed-off-by: Dhaval Shah <dshah@xilinx.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-01-08 13:42:46 +01:00
Michal Simek
5abcdc206f soc: xilinx: Create folder structure for soc specific drivers
Create directory structure with Makefile/Kconfig for adding xilinx soc
specific drivers.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-01-08 13:42:39 +01:00
Pierre-Louis Bossart
5c256045b8
ASoC: acpi: fix machine driver selection based on quirk
The ACPI/machine-driver code refactoring introduced in 4.13 introduced
a regression for cases where we need a DMI-based quirk to select the
machine driver (the BIOS reports an invalid HID). The fix is just to
make sure the results of the quirk are actually used.

Fixes: 54746dabf7 ('ASoC: Improve machine driver selection based on quirk data')
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=96691
Tested-by: Nicole Færber <nicole.faerber@dpin.de>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org
2018-01-08 12:17:44 +00:00
Andrew F. Davis
9bf485c955
regmap: Allow empty read/write_flag_mask
All zero read and write masks in the regmap config are used to signal no
special mask is needed and the bus defaults are used. In some devices
all zero read/write masks are the special mask and bus defaults should
not be used. To signal this a new variable is added.

For example SPI often sets bit 7 in address to signal to the device a
read is requested. On TI AFE44xx parts with SPI interfaces no bit
needs to be set as registers are either read or write only and the
operation can be determined from the address only. For this case both
masks must be zero to not effect the address.

Signed-off-by: Andrew F. Davis <afd@ti.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-08 12:15:04 +00:00
Andrew F. Davis
46318b9784
regcache: flat: Un-inline index lookup from cache access
This makes the code slightly more readable and allows for cleaner
addition of functionality in later patches.

Signed-off-by: Andrew F. Davis <afd@ti.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-08 12:08:57 +00:00
Darren Stevens
e47ecd4e48 libata:pata_atiixp: Don't use unconnected secondary port on SB600
The AMD SB600 southbridge has an PATA IDE interface, but the
    secondary port has no physical connections, so is disabled in
    the PCI header which makes it appear as a legacy port.

    On most systems this causes no trouble, but the Amigaone X1000 has
    an SB600 connected to a PowerPC SoC PCI-e root port, with an
    emulated ISA bus. On this system a kernel panic occurs at boot
    time during device attach for the secondary port.

    Mark the port as 'dummy' to prevent this. As a bonus, disabling
    this will slightly speed up booting on PC systems using an
    SB600 as they will now skip 2 known empty ports.

    Signed-off-by: Darren Stevens <Darren@stevens-zone.net>

Signed-off-by: Tejun Heo <tj@kernel.org>
2018-01-08 04:02:02 -08:00
Jani Nikula
67c3f3fc02 Merge tag 'gvt-fixes-2018-01-08' of https://github.com/intel/gvt-linux into drm-intel-fixes
gvt-fixes-2018-01-08

- clear shadow entry for post-sync (Zhi)
- fix stack out-of-bound warning in cmd parser (Changbin)

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180108061130.ucwtumhpbfbu4psu@zhen-hp.sh.intel.com
2018-01-08 13:30:09 +02:00
Matthias Kaehlcke
db51707b9c
ASoC: rockchip: i2s: Support mono capture
The Rockchip I2S controller only allows to configure even numbers of
capture channels. It is still possible to capture monophonic audio by
using dual-channel mode and ignoring the 'data' from the second
channel.

Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-08 11:28:33 +00:00
Wei Yongjun
3e8052d90d
ASoC: mediatek: mt2701: fix return value check in mt2701_afe_pcm_dev_probe()
In case of error, the function syscon_node_to_regmap() returns ERR_PTR()
and never returns NULL. The NULL test in the return value check should
be replaced with IS_ERR().

Fixes: dfa3cbb83e ("ASoC: mediatek: modify MT2701 AFE driver to adapt mfd device")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-08 11:27:45 +00:00
Vinod Koul
7c22ce6e21
regmap: Add SoundWire bus support
SoundWire bus provides sdw_read() and sdw_write() APIs for Slave
devices to program the registers. Provide support in regmap for
SoundWire bus.

Signed-off-by: Hardik T Shah <hardik.t.shah@intel.com>
Signed-off-by: Sanyog Kale <sanyog.r.kale@intel.com>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-08 11:27:18 +00:00
Guenter Roeck
a5a86a7f87
ASoC: fsl_ssi: Fix build error
powerpc:mpc85xx_defconfig fails to build with the following errors.

sound/soc/fsl/fsl_dma.c: In function 'fsl_soc_dma_probe':
sound/soc/fsl/fsl_dma.c:916:34: error: 'CCSR_SSI_STX0' undeclared
sound/soc/fsl/fsl_dma.c:917:34: error: 'CCSR_SSI_SRX0' undeclared

Fixes: a818aa5f96 ("ASoC: fsl_ssi: Rename registers and fields macros")
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Nicolin Chen <nicoleotsuka@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-08 11:21:19 +00:00
Stefan Agner
d593574aff
spi: imx: do not access registers while clocks disabled
Since clocks are disabled except during message transfer clocks
are also disabled when spi_imx_remove gets called. Accessing
registers leads to a freeeze at least on a i.MX 6ULL. Enable
clocks before disabling accessing the MXC_CSPICTRL register.

Fixes: 9e556dcc55 ("spi: spi-imx: only enable the clocks when we start to transfer a message")
Signed-off-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org
2018-01-08 11:19:07 +00:00
Mika Westerberg
0f89ffefa4 mfd: lpc_ich: Do not touch SPI-NOR write protection bit on Apollo Lake
Just to be on the safe side, don't touch the bit. If write access to the
flash chip is needed, the BIOS needs to enable it explicitly.

Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2018-01-08 11:03:35 +00:00
Hans de Goede
0c384fc862 mfd: axp20x: Mark axp288 CHRG_BAK_CTRL register volatile
The input current limit bits get updated by the charger detection logic,
so we should not cache the contents of this register.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2018-01-08 11:03:35 +00:00
Andy Shevchenko
156d07050b mfd: ab8500: Introduce DEFINE_SHOW_ATTRIBUTE() macro
This macro deduplicates a lot of similar code in the ab8500-debugfs.c module.
Targeting to be moved to seq_file.h eventually.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2018-01-08 11:03:35 +00:00
Romain Izard
7fdec11015 atmel_flexcom: Support resuming after a chip reset
The controller used by a flexcom module is configured at boot, and left
alone after this. In the suspend mode called "backup with self-refresh"
available on SAMA5D2, the chip will resume with most of its registers
reset. In this case, we need to restore the state of the flexcom driver
on resume.

Signed-off-by: Romain Izard <romain.izard.pro@gmail.com>
Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Tested-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2018-01-08 11:03:35 +00:00
Pravin Shedge
63fb9cb51d mfd: Remove duplicate includes
These duplicate includes have been found with scripts/checkincludes.pl but
they have been removed manually to avoid removing false positives.

Signed-off-by: Pravin Shedge <pravin.shedge4linux@gmail.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2018-01-08 11:03:35 +00:00
Fabio Estevam
39ce6133b9 dt-bindings: mfd: mc13xxx: Add the unit address to sysled
As the 'reg' property is mandatory in the subnodes, improve the
example by adding the unit address to the sysled node.

This prevents the following build warning with W=1:

Node /soc/aips@70000000/spba@70000000/ecspi@70010000/pmic@0/leds/sysled0 has a reg or ranges property, but no unit name

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2018-01-08 11:03:35 +00:00
Benjamin Gaignard
fa93f5b7aa mfd: stm32: Adopt SPDX identifier
Add SPDX identifier

Signed-off-by: Benjamin Gaignard <benjamin.gaignard@st.com>
Acked-by: Philippe Ombredanne <pombredanne@nexb.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2018-01-08 11:03:35 +00:00
Quentin Schulz
2bb3253c30 mfd: axp20x: Add pinctrl cell for AXP813
As GPIO/pinctrl driver now supports AXP813, add a cell for it.

Signed-off-by: Quentin Schulz <quentin.schulz@free-electrons.com>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2018-01-08 11:03:35 +00:00
Linus Walleij
a23670df27 mfd: pm8xxx: Make elegible for COMPILE_TEST
This should be enabled so that we get full compile coverage
of the PM8xxx MFD core with the different subdrivers.

Tested on the build servers.

Suggested-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2018-01-08 11:03:35 +00:00
Vasyl Gomonovych
263a7c57db mfd: kempld-core: Use resource_size function on resource object
drivers/mfd/kempld-core.c:461:13-16: WARNING: Suspicious code. resource_size is maybe missing with ioport

Generated by: scripts/coccinelle/api/resource_size.cocci

Signed-off-by: Vasyl Gomonovych <gomonovych@gmail.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2018-01-08 11:03:34 +00:00
Masahiro Yamada
299fad6b9b mfd: tmio: Move register macros to tmio_core.c
These registers are only used in drivers/mfd/tmio_core.c

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2018-01-08 11:03:34 +00:00
Jon Hunter
d501ff903b mfd: cros ec: spi: Simplify delay handling between SPI messages
The EC SPI driver prevents SPI transfers being to rapidly by keeping
track of the time the last transfer was issued via the
'last_transfer_ns' variable. Previously, if the 'last_transfer_ns'
variable was zero, this indicated that no previous transfer had been
sent and that no delay was needed. However, the EC SPI driver has
been updated to always initialise the 'last_transfer_ns' variable
during probe and therefore, it is no longer necessary to test if it
is zero. Remove the code that checks if this variable is zero.

Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Reviewed-by: Brian Norris <briannorris@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Acked-by: Benson Leung <bleung@chromium.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2018-01-08 11:03:34 +00:00
Keerthy
572ff4d560 mfd: palmas: Assign the right powerhold mask for tps65917
The powerhold mask for TPS65917 is different when comapred to
the other palmas versions. Hence assign the right mask that enables
power off of tps65917 pmic correctly.

Signed-off-by: Keerthy <j-keerthy@ti.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2018-01-08 11:03:34 +00:00
Markus Elfring
0a5d79bfc0 mfd: ab8500-debugfs: Use common error handling code in ab8500_print_modem_registers()
Add jump targets so that two error messages are stored only once
at the end of this function implementation.

This issue was detected by using the Coccinelle software.

Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2018-01-08 11:03:34 +00:00
Colin Ian King
e368866ea7 mfd: ti_am335x_tscadc: Remove redundant assignment to node
Node is being initialized a value that is never read, it is
being written over a few statements into the function with
the return value from call to of_get_child_by_name. Hence
this initialization can be removed. Cleans up clang warning:

drivers/mfd/ti_am335x_tscadc.c:127:22: warning: Value stored
to 'node' during its initialization is never read

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2018-01-08 11:03:34 +00:00
Arvind Yadav
f058aa3fab mfd: pcf50633: Fix spelling mistake: 'Falied' -> 'Failed'
Trivial fix to spelling mistakes in 'pcf50633_client_dev_register'.

Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2018-01-08 11:03:34 +00:00
Lee Jones
8848ff4206 Immutable branch for both MFD and EXTCON tree.
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJaTKdFAAoJEJzN3yze689T/vMP/irsEslIVpSWTmKkJVt4UGXC
 pCQwG0xozPF/tZ5dZ+dHznUcQLZE/FxDFzfJGb9pMFHKFt5NNCVXraUOKgVMv3Qv
 Cmy+q9XO6AwKNSm9xj9Bson7gJ5qHNpesG/BSptHshH61QgCUJK3fIG6Q+p6+El4
 P5XHE4iK7aYxHhMfkTDbMiFOl0PmGSliCnTZTpwhkVjq/q0tDdFVgayjltrwhUkH
 vNFRW7monJqeCFcYU85JotVxluMbCK2OuljCCPnQae8TOhvJTLE+QfJsSqtxxUEq
 gXTqqY3pxHWac3YaXzhopV46whODZnft/U7E917OoaNPK4Bf3rgqLTxgEPRU3uHu
 mvDSFPILH2F0lqBQ/WUrFndjmI/kWNvQanFzr07++hg1d0qRH4erax45F6ZoEafP
 73VpXJcTJJ+dyhtaTNKNE/dSRsdHx6gJD38W0J/ZWiSMQNPbQ/RJJSxYJFIjQgrZ
 c3kTCbXzedBjo3jeSMoZjeoomh8ed+PDH/59ISYE7ar16AoHV0KGNVUoTWQUdEhg
 txPVq9Xt6/0cR8u7ZgJi0I88K7plRPne/y/OgHcL5IcDDqXZYOJ5Xi3RTwlm0NO2
 NKmkg+Rt0+yb9zbaIEYulpLZ4WIsXi5Rf1ByhIqJO7Cy5YxSqznDNxtQqnP48jBd
 u9ecKNrScz//pHgGEqTT
 =97Us
 -----END PGP SIGNATURE-----

Merge branches 'ib-mfd-leds-4.16', 'ib-mfd-memstick-misc-mmc-4.16', 'ib-mfd-platform-4.16' and 'ib-mfd-tty-watchdog-4.16', tag 'ib-extcon-mfd-4.16-1' into ibs-for-mfd-merged

Immutable branch for both MFD and EXTCON tree.
2018-01-08 11:02:37 +00:00
Arnd Bergmann
68021bf473 tpm: remove unused variables
The CLKRUN fix caused a few harmless compile-time warnings:

drivers/char/tpm/tpm_tis.c: In function 'tpm_tis_pnp_remove':
drivers/char/tpm/tpm_tis.c:274:23: error: unused variable 'priv' [-Werror=unused-variable]
drivers/char/tpm/tpm_tis.c: In function 'tpm_tis_plat_remove':
drivers/char/tpm/tpm_tis.c:324:23: error: unused variable 'priv' [-Werror=unused-variable]

This removes the variables that have now become unused.

Fixes: 6d0866cbc2d3 ("tpm: Keep CLKRUN enabled throughout the duration of transmit_cmd()")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Reviewed-by: James Morris <jmorris@namei.org>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2018-01-08 12:58:54 +02:00
Javier Martinez Canillas
b4f20826de tpm: remove unused data fields from I2C and OF device ID tables
The data field for the entries in the device tables are set but not used.

Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Jason Gunthorpe <jgg@ziepe.ca>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2018-01-08 12:58:39 +02:00
Javier Martinez Canillas
6c9f0ce0df tpm: only attempt to disable the LPC CLKRUN if is already enabled
Commit 5e572cab92 ("tpm: Enable CLKRUN protocol for Braswell systems")
added logic in the TPM TIS driver to disable the Low Pin Count CLKRUN
signal during TPM transactions.

Unfortunately this breaks other devices that are attached to the LPC bus
like for example PS/2 mouse and keyboards.

One flaw with the logic is that it assumes that the CLKRUN is always
enabled, and so it unconditionally enables it after a TPM transaction.

But it could be that the CLKRUN# signal was already disabled in the LPC
bus and so after the driver probes, CLKRUN_EN will remain enabled which
may break other devices that are attached to the LPC bus but don't have
support for the CLKRUN protocol.

Fixes: 5e572cab92 ("tpm: Enable CLKRUN protocol for Braswell systems")
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Tested-by: James Ettle <james@ettle.org.uk>
Tested-by: Jeffery Miller <jmiller@neverware.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2018-01-08 12:58:39 +02:00
Javier Martinez Canillas
5fc0bead78 tpm: follow coding style for variable declaration in tpm_tis_core_init()
The coding style says "use just one data declaration per line (no commas
for multiple data declarations)" so follow this convention.

Suggested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2018-01-08 12:58:39 +02:00
Javier Martinez Canillas
764325add6 tpm: delete the TPM_TIS_CLK_ENABLE flag
This flag is only used to warn if CLKRUN_EN wasn't disabled on Braswell
systems, but the only way this can happen is if the code is not correct.

So it's an unnecessary check that just makes the code harder to read.

Suggested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2018-01-08 12:58:38 +02:00
Jason Gunthorpe
2463c4d09e tpm: Update MAINTAINERS for Jason Gunthorpe
Updated for Jason Gunthorpe's email and added web site for linux
integrity.

[jarkko.sakkinen@linux.intel.com: bundled web site update]

Signed-off-by: Jason Gunthorpe <jgunthorpe@ziepe.ca>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2018-01-08 12:58:38 +02:00
Azhar Shaikh
b3e958ce4c tpm: Keep CLKRUN enabled throughout the duration of transmit_cmd()
Commit 5e572cab92 ("tpm: Enable CLKRUN protocol for Braswell
systems") disabled CLKRUN protocol during TPM transactions and re-enabled
once the transaction is completed. But there were still some corner cases
observed where, reading of TPM header failed for savestate command
while going to suspend, which resulted in suspend failure.
To fix this issue keep the CLKRUN protocol disabled for the entire
duration of a single TPM command and not disabling and re-enabling
again for every TPM transaction. For the other TPM accesses outside
TPM command flow, add a higher level of disabling and re-enabling
the CLKRUN protocol, instead of doing for every TPM transaction.

Fixes: 5e572cab92 ("tpm: Enable CLKRUN protocol for Braswell systems")
Signed-off-by: Azhar Shaikh <azhar.shaikh@intel.com>
Reviewed-by: Jarkko Sakkinen  <jarkko.sakkinen@linux.intel.com>
Tested-by: Jarkko Sakkinen  <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen  <jarkko.sakkinen@linux.intel.com>
2018-01-08 12:58:38 +02:00
Azhar Shaikh
c382babccb tpm_tis: Move ilb_base_addr to tpm_tis_data
Move static variable ilb_base_addr to tpm_tis_data.

Cc: stable@vger.kernel.org
Signed-off-by: Azhar Shaikh <azhar.shaikh@intel.com>
Reviewed-by: Jarkko Sakkinen  <jarkko.sakkinen@linux.intel.com>
Tested-by: Jarkko Sakkinen  <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen  <jarkko.sakkinen@linux.intel.com>
2018-01-08 12:58:37 +02:00
Alexander.Steffen@infineon.com
0b66f2a05a tpm2-cmd: allow more attempts for selftest execution
Previously, if the last attempt to execute the selftest command failed with
RC_TESTING, there was still a call to tpm_msleep, even though no further
attempt would be made. This causes an unnecessary delay, therefore ensure
that if the last attempt fails the function is left immediately.

Also, instead of ensuring that the cumulated runtime of all attempts is
larger than the command duration for TPM2_SelfTest, ensure that there is at
least one attempt for which the delay is larger than the expected command
duration. This allows slow TPMs to execute all their tests in the
background, without slowing down faster TPMs that have finished their tests
earlier. If tests are still not finished even with this long delay, then
something is broken and the TPM is not used.

Fixes: 125a221054 ("tpm: React correctly to RC_TESTING from TPM 2.0 self
tests")

Signed-off-by: Alexander Steffen <Alexander.Steffen@infineon.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2018-01-08 12:58:37 +02:00
Javier Martinez Canillas
095531f891 tpm: return a TPM_RC_COMMAND_CODE response if command is not implemented
According to the TPM Library Specification, a TPM device must do a command
header validation before processing and return a TPM_RC_COMMAND_CODE code
if the command is not implemented.

So user-space will expect to handle that response as an error. But if the
in-kernel resource manager is used (/dev/tpmrm?), an -EINVAL errno code is
returned instead if the command isn't implemented. This confuses userspace
since it doesn't expect that error value.

This also isn't consistent with the behavior when not using TPM spaces and
accessing the TPM directly (/dev/tpm?). In this case, the command is sent
to the TPM even when not implemented and the TPM responds with an error.

Instead of returning an -EINVAL errno code when the tpm_validate_command()
function fails, synthesize a TPM command response so user-space can get a
TPM_RC_COMMAND_CODE as expected when a chip doesn't implement the command.

The TPM only sets 12 of the 32 bits in the TPM_RC response, so the TSS and
TAB specifications define that higher layers in the stack should use some
of the unused 20 bits to specify from which level of the stack the error
is coming from.

Since the TPM_RC_COMMAND_CODE response code is sent by the kernel resource
manager, set the error level to the TAB/RM layer so user-space is aware of
this.

Suggested-by: Jason Gunthorpe <jgg@ziepe.ca>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: William Roberts <william.c.roberts@intel.com>
Reviewed-by: Philip Tricca <philip.b.tricca@intel.com>
Reviewed-by: Jarkko Sakkinen  <jarkko.sakkinen@linux.intel.com>
Tested-by: Jarkko Sakkinen  <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen  <jarkko.sakkinen@linux.intel.com>
2018-01-08 12:58:36 +02:00
Jason Gunthorpe
6e592a065d tpm: Move Linux RNG connection to hwrng
The tpm-rng.c approach is completely inconsistent with how the kernel
handles hotplug. Instead manage a hwrng device for each TPM. This will
cause the kernel to read entropy from the TPM when it is plugged in, and
allow access to the TPM rng via /dev/hwrng.

Signed-off-by: Jason Gunthorpe <jgg@ziepe.ca>
Tested-by: PrasannaKumar Muralidharan <prasannatsmkumar@gmail.com>
Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2018-01-08 12:58:36 +02:00
Jarkko Sakkinen
aad887f664 tpm: use struct tpm_chip for tpm_chip_find_get()
Device number (the character device index) is not a stable identifier
for a TPM chip. That is the reason why every call site passes
TPM_ANY_NUM to tpm_chip_find_get().

This commit changes the API in a way that instead a struct tpm_chip
instance is given and NULL means the default chip. In addition, this
commit refines the documentation to be up to date with the
implementation.

Suggested-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> (@chip_num -> @chip part)
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Reviewed-by: Jason Gunthorpe <jgg@ziepe.ca>
Tested-by: PrasannaKumar Muralidharan <prasannatsmkumar@gmail.com>
2018-01-08 12:58:36 +02:00
Thiebaud Weksteen
58cc1e4faf tpm: parse TPM event logs based on EFI table
If we are not able to retrieve the TPM event logs from the ACPI table,
check the EFI configuration table (Linux-specific GUID).

The format version of the log is now returned by the provider function.

Signed-off-by: Thiebaud Weksteen <tweek@google.com>
Reviewed-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Tested-by: Javier Martinez Canillas <javierm@redhat.com>
Tested-by: Jarkko Sakkinen  <jarkko.sakkinen@linux.intel.com>
Reviewed-by: Jarkko Sakkinen  <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen  <jarkko.sakkinen@linux.intel.com>
2018-01-08 12:58:35 +02:00