Commit graph

932,869 commits

Author SHA1 Message Date
Linus Torvalds
bde6b37e49 xen: fixes for 4.15-rc4
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQEcBAABAgAGBQJaM17CAAoJELDendYovxMvZs0H/3YIAN3wXEqcaZuAoMKdTU3C
 gSipBUJKwcwo/1qJCtE5CzQnl7U6qC4BPnwNfed1AJUULFBYtpEMw6KFMhK2KELn
 ADWoJzVbBzouZnj0GHuky4dQnsC5lPL3RjlWqKkzlEA3KebrxLsO7inw5Pru9zPZ
 y1Isl/nLxV04f8SYITjgThCCdo9pnQOdx275YAcbQprqsOK45j+4d1Mn0fYb1Rjk
 7Fk4i9UAZlY/VYycpgyC/m3PKFdawl0uqHXwu4yTKXQJGZ3BwED7ifTvHknaSOhA
 DVxktnEOTg5IrrqDrr4EdZIgXQcqQF19oIOtEWCKCLvW8j/sBlSAQYkgtn5OpxY=
 =gqWy
 -----END PGP SIGNATURE-----

Merge tag 'for-linus-4.15-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip

Pull xen fixes from Juergen Gross:
 "Two minor fixes for running as Xen dom0:

   - when built as 32 bit kernel on large machines the Xen LAPIC
     emulation should report a rather modern LAPIC in order to support
     enough APIC-Ids

   - The Xen LAPIC emulation is needed for dom0 only, so build it only
     for kernels supporting to run as Xen dom0"

* tag 'for-linus-4.15-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
  xen: XEN_ACPI_PROCESSOR is Dom0-only
  x86/Xen: don't report ancient LAPIC version
2017-12-15 11:32:09 -08:00
Trond Myklebust
90d91b0cd3 SUNRPC: Fix a race in the receive code path
We must ensure that the call to rpc_sleep_on() in xprt_transmit() cannot
race with the call to xprt_complete_rqst().

Reported-by: Chuck Lever <chuck.lever@oracle.com>
Link: https://bugzilla.linux-nfs.org/show_bug.cgi?id=317
Fixes: ce7c252a8c ("SUNRPC: Add a separate spinlock to protect..")
Cc: stable@vger.kernel.org # 4.14+
Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2017-12-15 14:31:56 -05:00
Scott Mayhew
dc4fd9ab01 nfs: don't wait on commit in nfs_commit_inode() if there were no commit requests
If there were no commit requests, then nfs_commit_inode() should not
wait on the commit or mark the inode dirty, otherwise the following
BUG_ON can be triggered:

[ 1917.130762] kernel BUG at fs/inode.c:578!
[ 1917.130766] Oops: Exception in kernel mode, sig: 5 [#1]
[ 1917.130768] SMP NR_CPUS=2048 NUMA pSeries
[ 1917.130772] Modules linked in: iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi blocklayoutdriver rpcsec_gss_krb5 auth_rpcgss nfsv4 dns_resolver nfs lockd grace fscache sunrpc sg nx_crypto pseries_rng ip_tables xfs libcrc32c sd_mod crc_t10dif crct10dif_generic crct10dif_common ibmvscsi scsi_transport_srp ibmveth scsi_tgt dm_mirror dm_region_hash dm_log dm_mod
[ 1917.130805] CPU: 2 PID: 14923 Comm: umount.nfs4 Tainted: G               ------------ T 3.10.0-768.el7.ppc64 #1
[ 1917.130810] task: c0000005ecd88040 ti: c00000004cea0000 task.ti: c00000004cea0000
[ 1917.130813] NIP: c000000000354178 LR: c000000000354160 CTR: c00000000012db80
[ 1917.130816] REGS: c00000004cea3720 TRAP: 0700   Tainted: G               ------------ T  (3.10.0-768.el7.ppc64)
[ 1917.130820] MSR: 8000000100029032 <SF,EE,ME,IR,DR,RI>  CR: 22002822  XER: 20000000
[ 1917.130828] CFAR: c00000000011f594 SOFTE: 1
GPR00: c000000000354160 c00000004cea39a0 c0000000014c4700 c0000000018cc750
GPR04: 000000000000c750 80c0000000000000 0600000000000000 04eeb76bea749a03
GPR08: 0000000000000034 c0000000018cc758 0000000000000001 d000000005e619e8
GPR12: c00000000012db80 c000000007b31200 0000000000000000 0000000000000000
GPR16: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
GPR20: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
GPR24: 0000000000000000 c000000000dfc3ec 0000000000000000 c0000005eefc02c0
GPR28: d0000000079dbd50 c0000005b94a02c0 c0000005b94a0250 c0000005b94a01c8
[ 1917.130867] NIP [c000000000354178] .evict+0x1c8/0x350
[ 1917.130871] LR [c000000000354160] .evict+0x1b0/0x350
[ 1917.130873] Call Trace:
[ 1917.130876] [c00000004cea39a0] [c000000000354160] .evict+0x1b0/0x350 (unreliable)
[ 1917.130880] [c00000004cea3a30] [c0000000003558cc] .evict_inodes+0x13c/0x270
[ 1917.130884] [c00000004cea3af0] [c000000000327d20] .kill_anon_super+0x70/0x1e0
[ 1917.130896] [c00000004cea3b80] [d000000005e43e30] .nfs_kill_super+0x20/0x60 [nfs]
[ 1917.130900] [c00000004cea3c00] [c000000000328a20] .deactivate_locked_super+0xa0/0x1b0
[ 1917.130903] [c00000004cea3c80] [c00000000035ba54] .cleanup_mnt+0xd4/0x180
[ 1917.130907] [c00000004cea3d10] [c000000000119034] .task_work_run+0x114/0x150
[ 1917.130912] [c00000004cea3db0] [c00000000001ba6c] .do_notify_resume+0xcc/0x100
[ 1917.130916] [c00000004cea3e30] [c00000000000a7b0] .ret_from_except_lite+0x5c/0x60
[ 1917.130919] Instruction dump:
[ 1917.130921] 7fc3f378 486734b5 60000000 387f00a0 38800003 4bdcb365 60000000 e95f00a0
[ 1917.130927] 694a0060 7d4a0074 794ad182 694a0001 <0b0a0000> 892d02a4 2f890000 40de0134

Signed-off-by: Scott Mayhew <smayhew@redhat.com>
Cc: stable@vger.kernel.org # 4.5+
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2017-12-15 14:31:50 -05:00
Chuck Lever
ccede75985 xprtrdma: Spread reply processing over more CPUs
Commit d8f532d20e ("xprtrdma: Invoke rpcrdma_reply_handler
directly from RECV completion") introduced a performance regression
for NFS I/O small enough to not need memory registration. In multi-
threaded benchmarks that generate primarily small I/O requests,
IOPS throughput is reduced by nearly a third. This patch restores
the previous level of throughput.

Because workqueues are typically BOUND (in particular ib_comp_wq,
nfsiod_workqueue, and rpciod_workqueue), NFS/RDMA workloads tend
to aggregate on the CPU that is handling Receive completions.

The usual approach to addressing this problem is to create a QP
and CQ for each CPU, and then schedule transactions on the QP
for the CPU where you want the transaction to complete. The
transaction then does not require an extra context switch during
completion to end up on the same CPU where the transaction was
started.

This approach doesn't work for the Linux NFS/RDMA client because
currently the Linux NFS client does not support multiple connections
per client-server pair, and the RDMA core API does not make it
straightforward for ULPs to determine which CPU is responsible for
handling Receive completions for a CQ.

So for the moment, record the CPU number in the rpcrdma_req before
the transport sends each RPC Call. Then during Receive completion,
queue the RPC completion on that same CPU.

Additionally, move all RPC completion processing to the deferred
handler so that even RPCs with simple small replies complete on
the CPU that sent the corresponding RPC Call.

Fixes: d8f532d20e ("xprtrdma: Invoke rpcrdma_reply_handler ...")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2017-12-15 14:31:50 -05:00
Scott Mayhew
c156618e15 nfs: fix a deadlock in nfs client initialization
The following deadlock can occur between a process waiting for a client
to initialize in while walking the client list during nfsv4 server trunking
detection and another process waiting for the nfs_clid_init_mutex so it
can initialize that client:

Process 1                               Process 2
---------                               ---------
spin_lock(&nn->nfs_client_lock);
list_add_tail(&CLIENTA->cl_share_link,
        &nn->nfs_client_list);
spin_unlock(&nn->nfs_client_lock);
                                        spin_lock(&nn->nfs_client_lock);
                                        list_add_tail(&CLIENTB->cl_share_link,
                                                &nn->nfs_client_list);
                                        spin_unlock(&nn->nfs_client_lock);
                                        mutex_lock(&nfs_clid_init_mutex);
                                        nfs41_walk_client_list(clp, result, cred);
                                        nfs_wait_client_init_complete(CLIENTA);
(waiting for nfs_clid_init_mutex)

Make sure nfs_match_client() only evaluates clients that have completed
initialization in order to prevent that deadlock.

This patch also fixes v4.0 trunking behavior by not marking the client
NFS_CS_READY until the clientid has been confirmed.

Signed-off-by: Scott Mayhew <smayhew@redhat.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2017-12-15 14:31:49 -05:00
Jan Kundrát
38d5583ff8 serial: max310x: Fix invalid memory access during GPIO init
The `max310x_spi_probe` function attempted to setup the GPIO bits before
the corresponding structs for each serial port were initialized. If the
DTS file specified a GPIO hog, this led to a crash because the GPIO
stack ended up calling `max310x_gpio_direction_output` which referenced
uninitialized memory:

 [<c04598c0>] (max310x_gpio_direction_output) from [<c03f5a2c>] (_gpiod_direction_output_raw+0x94/0x2d4)
 [<c03f5a2c>] (_gpiod_direction_output_raw) from [<c03f991c>] (gpiod_hog+0x6c/0x154)
 [<c03f991c>] (gpiod_hog) from [<c03fa2d8>] (of_gpiochip_add+0x28c/0x444)
 [<c03fa2d8>] (of_gpiochip_add) from [<c03f6b2c>] (gpiochip_add_data+0x4f8/0x760)
 [<c03f6b2c>] (gpiochip_add_data) from [<c03f6dd4>] (devm_gpiochip_add_data+0x40/0x7c)
 [<c03f6dd4>] (devm_gpiochip_add_data) from [<c0459fec>] (max310x_spi_probe+0x530/0x894)
 [<c0459fec>] (max310x_spi_probe) from [<c0503294>] (spi_drv_probe+0x7c/0xac)
 [<c0503294>] (spi_drv_probe) from [<c046628c>] (driver_probe_device+0x234/0x2e8)
 [<c046628c>] (driver_probe_device) from [<c0464890>] (bus_for_each_drv+0x60/0x94)
 [<c0464890>] (bus_for_each_drv) from [<c0465f78>] (__device_attach+0xb0/0x114)
 [<c0465f78>] (__device_attach) from [<c0465548>] (bus_probe_device+0x84/0x8c)
 [<c0465548>] (bus_probe_device) from [<c0463a00>] (device_add+0x3f4/0x580)
 [<c0463a00>] (device_add) from [<c0504164>] (spi_add_device+0x9c/0x134)
 [<c0504164>] (spi_add_device) from [<c0504c18>] (spi_register_controller+0x484/0x910)
 [<c0504c18>] (spi_register_controller) from [<c0506ee0>] (orion_spi_probe+0x2f4/0x3b4)
 [<c0506ee0>] (orion_spi_probe) from [<c0467dac>] (platform_drv_probe+0x50/0xb0)
 [<c0467dac>] (platform_drv_probe) from [<c046628c>] (driver_probe_device+0x234/0x2e8)
 [<c046628c>] (driver_probe_device) from [<c04663f8>] (__driver_attach+0xb8/0xbc)
 [<c04663f8>] (__driver_attach) from [<c04647e8>] (bus_for_each_dev+0x68/0x9c)
 [<c04647e8>] (bus_for_each_dev) from [<c046574c>] (bus_add_driver+0x104/0x210)
 [<c046574c>] (bus_add_driver) from [<c0466f14>] (driver_register+0x78/0xf4)
 [<c0466f14>] (driver_register) from [<c0101bdc>] (do_one_initcall+0x44/0x168)
 [<c0101bdc>] (do_one_initcall) from [<c0a00dc0>] (kernel_init_freeable+0x140/0x1cc)
 [<c0a00dc0>] (kernel_init_freeable) from [<c078c590>] (kernel_init+0x8/0x108)
 [<c078c590>] (kernel_init) from [<c0107a50>] (ret_from_fork+0x14/0x24)

This can be easily fixed by moving the corresponding code below. And
because the UARTs are already there by the time we reach this point, the
`goto` needs changing so that more stuff is freed. (I have not tested
this error path.)

Signed-off-by: Jan Kundrát <jan.kundrat@cesnet.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-15 20:29:59 +01:00
Miquel Raynal
d160c34134 dt-bindings: mvebu-uart: update documentation with extended UART
Update the device tree binding documentation for the Marvell EBU UART,
in order to allow describing the extended UART IP block, in addition to
the already supported standard UART IP. This requires adding a new
compatible string, the introduction of a clocks property, and extensions
to the interrupts property.

Signed-off-by: Miquel Raynal <miquel.raynal@free-electrons.com>
Reviewed-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-15 20:27:44 +01:00
Branislav Radocaj
5c3055393f tty: serial: mxs-auart: fix error handling in mxs_auart_probe
If uart_add_one_port() fails in mxs_auart_probe, the clks has
to be disabled.Two clks are previously enabled in mxs_get_clks().
Found by Linux Driver Verification project (linuxtesting.org).

Signed-off-by: Branislav Radocaj <branislav@radocaj.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-15 20:27:44 +01:00
Sebastian Andrzej Siewior
6a28fd2bbc tty: goldfish: Enable 'earlycon' only if built-in
Commit 3840ed9548 ("tty: goldfish: Implement support for kernel
'earlycon' parameter") breaks an allmodconfig config on x86:
|  LD      vmlinux.o
|  MODPOST vmlinux.o
|drivers/tty/serial/earlycon.o: In function `parse_options':
|drivers/tty/serial/earlycon.c:97: undefined reference to `uart_parse_earlycon'
|Makefile:1005: recipe for target 'vmlinux' failed

earlycon.c::parse_options() invokes uart_parse_earlycon() from serial_core.c
which is compiled=m because GOLDFISH_TTY itself (and most others) are =m.
To avoid that, I'm adding the _CONSOLE config option which is selected if the
GOLDFISH module itself is =y since it doesn't need the early bits for the =m
case (other drivers do the same dance).
The alternative would be to move uart_parse_earlycon() from
serial_core.c to earlycon.c (we don't have that many users of that
function).

Fixes: 3840ed9548 ("tty: goldfish: Implement support for kernel
       'earlycon' parameter")
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Reviewed-by: Miodrag Dinic <miodrag.dinic@mips.com>
Acked-by: Miodrag Dinic <miodrag.dinic@mips.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-15 20:27:44 +01:00
Rolf Evers-Fischer
93ad86735d serial: 8250: 8250_omap: Fix spelling error.
Fixed a spelling error in a comment.

Signed-off-by: Rolf Evers-Fischer <rolf.evers.fischer@aptiv.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-15 20:27:44 +01:00
Stefan Potyra
8af016aa5a serial: 8250_dw: Disable clock on error
If there is no clock rate for uartclk defined, disable the previously
enabled clock again.

Found by Linux Driver Verification project (linuxtesting.org).

Fixes: 23f5b3fdd0 serial: 8250_dw: only get the clock rate in one place
Signed-off-by: Stefan Potyra <Stefan.Potyra@elektrobit.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-15 20:27:43 +01:00
Ludovic Barre
0858fe3c9c serial: stm32: fix name conflict with 8250
This patch replaces stm32 tty name ttyS by ttySTM
to avoid a name conflict when Serial: 8250/16550 driver
is activated.

sysfs: cannot create duplicate filename '/class/tty/ttyS3'
Modules linked in:
CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.14.0-12903-gb392521-dirty #1
[<c03118dc>] (unwind_backtrace) from [<c030c950>] (show_stack+0x10/0x14)
[<c030c950>] (show_stack) from [<c0d31e18>] (dump_stack+0x90/0xa4)
[<c0d31e18>] (dump_stack) from [<c03430a0>] (__warn+0xf8/0x110)
[<c03430a0>] (__warn) from [<c03430f0>] (warn_slowpath_fmt+0x38/0x48)
[<c03430f0>] (warn_slowpath_fmt) from [<c04ce574>] (sysfs_warn_dup+0x68/0x78)
[<c04ce574>] (sysfs_warn_dup) from [<c04ce824>] (sysfs_do_create_link_sd+0xb4/0xc4)
[<c04ce824>] (sysfs_do_create_link_sd) from [<c08c60ec>] (device_add+0x204/0x574)
[<c08c60ec>] (device_add) from [<c07a7ddc>] (tty_register_device_attr+0xc8/0x1bc)
[<c07a7ddc>] (tty_register_device_attr) from [<c07c6530>] (uart_add_one_port+0x22c/0x4f4)

Signed-off-by: Ludovic Barre <ludovic.barre@st.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-15 20:27:43 +01:00
Jia-Ju Bai
fe8e7acea2 tty/isicom: Fix a possible sleep-in-atomic bug in WaitTillCardIsFree
The driver may sleep under a spinlock.
The function call paths are:
isicom_activate (acquire the spinlock)
  isicom_setup_board
    drop_dtr_rts
      WaitTillCardIsFree
        msleep --> may sleep

isicom_set_termios
  isicom_config_port
    drop_dtr
      WaitTillCardIsFree
        msleep --> may sleep

isicom_tiocmset
  drop_dtr
    WaitTillCardIsFree
      msleep --> may sleep

Though "in_atomic" is used to check atomic context,
but it is not recommended to use in driver code (see include/linux/preempt.h).

To fix it, only using mdelay instead.

This bug is found by my static analysis tool(DSAC) and checked by my code review.

Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-15 20:24:14 +01:00
Geert Uytterhoeven
be7e251d20 tty: serial: sh-sci: Hide DMA config question
On most Renesas ARM platforms, the SCIF serial ports can be used with
DMA, so most users will want DMA support to be enabled.

On SuperH platforms, SCI(F) serial ports cannot be used with DMA yet
(see also commit 219fb0c143 ("serial: sh-sci: Remove the platform
data dma slave rx/tx channel IDs")), so users will want it disabled to
reduce kernel size.

Hence follow the above rationale to configure the default, unless
CONFIG_EXPERT is enabled.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-15 20:24:14 +01:00
Geert Uytterhoeven
3a987e7354 tty: serial: sh-sci: Hide earlycon config question
Renesas H8/300 and ARM platforms use DT and support earlycon, so most
users want earlycon support to be enabled.

On SuperH platforms, earlycon is not yet supported.

Hence follow the above rationale to configure the default, unless
CONFIG_EXPERT is enabled.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-15 20:24:14 +01:00
Geert Uytterhoeven
c5bb576d5e tty: serial: sh-sci: Hide serial console config question
Most users will want to use a serial console.

Hence make that the default, unless CONFIG_EXPERT is enabled.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-15 20:24:14 +01:00
Geert Uytterhoeven
f6731485a5 tty: serial: sh-sci: Hide number of ports config question
Auto-configure the maximum number of serial ports based on how many can
be present on the architecture:
  - 3 on H8/300,
  - 10 on SuperH,
  - 18 on Reneas ARM.

The default can still be overridden if CONFIG_EXPERT is enabled.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-15 20:24:14 +01:00
Christian Borntraeger
1598e38c07 serial: forbid 8250 on s390
Using "make kvmconfig" results in a potentially unusable linux image
on s390.  The reason is that both the (default on s390) sclp consoles
as well as the 8250 console register a ttyS<x> as console. Since there
will be no 8250 on s390 let's fence 8250. This will ensure that there
is always a working sclp console.

Reported-by: Alice Frosi <alice@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-15 20:21:28 +01:00
Haishuang Yan
c05fad5713 ip_gre: fix wrong return value of erspan_rcv
If pskb_may_pull return failed, return PACKET_REJECT instead of -ENOMEM.

Fixes: 84e54fe0a5 ("gre: introduce native tunnel support for ERSPAN")
Cc: William Tu <u9012063@gmail.com>
Signed-off-by: Haishuang Yan <yanhaishuang@cmss.chinamobile.com>
Acked-by: William Tu <u9012063@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-15 14:10:39 -05:00
Steve Longerbeam
45267fed3e media: staging/imx: update TODO
Update TODO file:

- Remove TODO info about the OV564x driver, while this still needs
  to be done (add a OV5642 driver or merge with OV5640 driver), it
  is not relevant here.

- Update TODO about methods for retrieving CSI bus config.

- Add some TODO's about OF graph parsing restrictions.

Signed-off-by: Steve Longerbeam <steve_longerbeam@mentor.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-12-15 14:10:26 -05:00
Steve Longerbeam
e762fe4c58 media: staging/imx: reorder function prototypes
Re-order some of the function prototypes in imx-media.h to
group them correctly by source file. No functional changes.

Signed-off-by: Steve Longerbeam <steve_longerbeam@mentor.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-12-15 14:09:42 -05:00
Steve Longerbeam
bd9d208a04 media: staging/imx: convert static vdev lists to list_head
Although not technically necessary because imx-media has only a
maximum of 8 video devices, and once setup the video device lists
are static, in anticipation of moving control ineritance to
v4l2-core, make the vdev lists more generic by converting to
dynamic list_head's.

After doing that, 'struct imx_media_pad' is now just a list_head
of video devices reachable from a pad. Allocate an array of list_head's,
one list_head for each pad, and attach that array to sd->host_priv.
An entry in the pad lists is of type 'struct imx_media_pad_vdev', and
points to a video device from the master list.

Signed-off-by: Steve Longerbeam <steve_longerbeam@mentor.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-12-15 14:08:03 -05:00
Sudeep Holla
f57ab9a01a drivers: base: cacheinfo: fix cache type for non-architected system cache
Commit dfea747d2a ("drivers: base: cacheinfo: support DT overrides for
cache properties") doesn't initialise the cache type if it's present
only in DT and the architecture is not aware of it. They are unified
system level cache which are generally transparent.

This patch check if the cache type is set to NOCACHE but the DT node
indicates that it's unified cache and sets the cache type accordingly.

Fixes: dfea747d2a ("drivers: base: cacheinfo: support DT overrides for cache properties")
Reported-and-tested-by: Tan Xiaojun <tanxiaojun@huawei.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-15 20:07:49 +01:00
Steve Longerbeam
9f6a0c59eb media: staging/imx: remove static subdev arrays
For more complex OF graphs, there will be more async subdevices
registered. Remove the static subdev[IMX_MEDIA_MAX_SUBDEVS] array,
so that imx-media places no limits on the number of async subdevs
that can be added and registered.

There were two uses for 'struct imx_media_subdev'. First was to act
as the async subdev list to be passed to v4l2_async_notifier_register().

Second was to aid in inheriting subdev controls to the capture devices,
and this is done by creating a list of capture devices that can be reached
from a subdev's source pad. So 'struct imx_media_subdev' also contained
a static array of 'struct imx_media_pad' for placing the capture device
lists at each pad.

'struct imx_media_subdev' has been completely removed. Instead, at async
completion, allocate an array of 'struct imx_media_pad' and attach it to
the subdev's host_priv pointer, in order to support subdev controls
inheritance.

Likewise, remove static async_ptrs[IMX_MEDIA_MAX_SUBDEVS] array.
Instead, allocate a 'struct imx_media_async_subdev' when forming
the async list, and add it to an asd_list list_head in
imx_media_add_async_subdev(). At async completion, allocate the
asd pointer list and pull the asd's off asd_list for
v4l2_async_notifier_register().

Signed-off-by: Steve Longerbeam <steve_longerbeam@mentor.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-12-15 14:06:58 -05:00
Steve Longerbeam
4eef678d32 media: staging/imx: pass fwnode handle to find/add async subdev
Pass the subdev's fwnode_handle to imx_media_find_async_subdev() and
imx_media_add_async_subdev(), instead of a device_node.

Signed-off-by: Steve Longerbeam <steve_longerbeam@mentor.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-12-15 14:06:00 -05:00
Steve Longerbeam
4dadf0562b media: staging/imx: remove devname string from imx_media_subdev
A separate string for the device name, for DEVNAME async match, was
never needed. Just assign the asd device name to the passed platform
device name pointer in imx_media_add_async_subdev().

Signed-off-by: Steve Longerbeam <steve_longerbeam@mentor.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-12-15 14:05:29 -05:00
Steve Longerbeam
f5abe1c5f9 media: staging/imx: of: allow for recursing downstream
Calling of_parse_subdev() recursively to a downstream path that has
already been followed is ok, it just means that call will return
immediately since the subdevice was already added to the async list.

With that there is no need to determine whether a subdevice's port
is a sink or source, so 'num_{sink|src}_pads' is no longer used and
is removed.

Signed-off-by: Steve Longerbeam <steve_longerbeam@mentor.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-12-15 14:04:30 -05:00
Steve Longerbeam
621b08eabc media: staging/imx: remove static media link arrays
Remove the static list of media links that were formed at probe time.
These links can instead be created after all registered async subdevices
have been bound in imx_media_probe_complete().

The media links between subdevices that exist in the device tree, can
be created post-async completion by using v4l2_fwnode_parse_link() for
each endpoint node of that subdevice. Note this approach assumes
device-tree ports are equivalent to media pads (pad index equals
port id), and that device-tree endpoints are equivalent to media
links between pads.

Because links are no longer parsed by imx_media_of_parse(), its sole
function is now only to add subdevices that it encounters by walking
the OF graph to the async list, so the function has been renamed
imx_media_add_of_subdevs().

Similarly, the media links between the IPU-internal subdevice pads (the
CSI source pads, and all pads between the vdic, ic-prp, ic-prpenc, and
ic-prpvf subdevices), can be created post-async completion by looping
through the subdevice's media pads and using the const internal_subdev
table.

Because links are no longer parsed by imx_media_add_internal_subdevs(),
this function no longer needs an array of CSI subdevs to form links
from.

In summary, the following functions, which were used to form a list
of media links at probe time, are removed:

imx_media_add_pad_link()
add_internal_links()
of_add_pad_link()

replaced by these functions, called at probe time, which only populate
the async subdev list:

imx_media_add_of_subdevs()
imx_media_add_internal_subdevs()

and these functions, called at async completion, which create the
media links:

imx_media_create_of_links()
imx_media_create_csi_of_links()
imx_media_create_internal_links()

Signed-off-by: Steve Longerbeam <steve_longerbeam@mentor.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-12-15 14:03:20 -05:00
David S. Miller
b3b8707739 Merge branch 'sctp-stream-interleave'
Xin Long says:

====================
sctp: Implement Stream Interleave: Interaction with Other SCTP Extensions

Stream Interleave would be implemented in two Parts:

   1. The I-DATA Chunk Supporting User Message Interleaving
   2. Interaction with Other SCTP Extensions

Overview in section 2.3 of RFC8260 for Part 2:

   The usage of the I-DATA chunk might interfere with other SCTP
   extensions.  Future SCTP extensions MUST describe if and how they
   interfere with the usage of I-DATA chunks.  For the SCTP extensions
   already defined when this document was published, the details are
   given in the following subsections.

As the 2nd part of Stream Interleave Implementation, this patchset mostly
adds the support for SCTP Partial Reliability Extension with I-FORWARD-TSN
chunk. Then adjusts stream scheduler and stream reconfig to make them work
properly with I-DATA chunks.

In the last patch, all stream interleave codes will be enabled by adding
sysctl to allow users to use this feature.

v1 -> v2:
  - removed the intl_enable check from sctp_chunk_event_lookup, as Marcelo's
    suggestion.
  - fixed a typo in changelog.
====================

Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-15 13:52:46 -05:00
Xin Long
463118c34a sctp: support sysctl to allow users to use stream interleave
This is the last patch for support of stream interleave, after this patch,
users could enable stream interleave by systcl -w net.sctp.intl_enable=1.

Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo R. Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-15 13:52:22 -05:00
Xin Long
107e242569 sctp: update mid instead of ssn when doing stream and asoc reset
When using idata and doing stream and asoc reset, setting ssn with
0 could only clear the 1st 16 bits of mid.

So to make this work for both data and idata, it sets mid with 0
instead of ssn, and also mid_uo for unordered idata also need to
be cleared, as said in section 2.3.2 of RFC8260.

Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo R. Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-15 13:52:22 -05:00
Xin Long
ef4775e340 sctp: add stream interleave support in stream scheduler
As Marcelo said in the stream scheduler patch:

  Support for I-DATA chunks, also described in RFC8260, with user message
  interleaving is straightforward as it just requires the schedulers to
  probe for the feature and ignore datamsg boundaries when dequeueing.

All needs to do is just to ignore datamsg boundaries when dequeueing.

Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo R. Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-15 13:52:22 -05:00
Xin Long
de60fe9105 sctp: implement handle_ftsn for sctp_stream_interleave
handle_ftsn is added as a member of sctp_stream_interleave, used to skip
ssn for data or mid for idata, called for SCTP_CMD_PROCESS_FWDTSN cmd.

sctp_handle_iftsn works for ifwdtsn, and sctp_handle_fwdtsn works for
fwdtsn. Note that different from sctp_handle_fwdtsn, sctp_handle_iftsn
could do stream abort pd.

Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo R. Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-15 13:52:22 -05:00
Xin Long
47b20a8856 sctp: implement report_ftsn for sctp_stream_interleave
report_ftsn is added as a member of sctp_stream_interleave, used to
skip tsn from tsnmap, remove old events from reasm or lobby queue,
and abort pd for data or idata, called for SCTP_CMD_REPORT_FWDTSN
cmd and asoc reset.

sctp_report_iftsn works for ifwdtsn, and sctp_report_fwdtsn works
for fwdtsn. Note that sctp_report_iftsn doesn't do asoc abort_pd,
as stream abort_pd will be done when handling ifwdtsn. But when
ftsn is equal with ftsn, which means asoc reset, asoc abort_pd has
to be done.

Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo R. Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-15 13:52:22 -05:00
Xin Long
0fc2ea922c sctp: implement validate_ftsn for sctp_stream_interleave
validate_ftsn is added as a member of sctp_stream_interleave, used to
validate ssn/chunk type for fwdtsn or mid (message id)/chunk type for
ifwdtsn, called in sctp_sf_eat_fwd_tsn, just as validate_data.

If this check fails, an abort packet will be sent, as said in section
2.3.1 of RFC8260.

As ifwdtsn and fwdtsn chunks have different length, it also defines
ftsn_chunk_len for sctp_stream_interleave to describe the chunk size.
Then it replaces all sizeof(struct sctp_fwdtsn_chunk) with
sctp_ftsnchk_len.

It also adds the process for ifwdtsn in rx path. As Marcelo pointed
out, there's no need to add event table for ifwdtsn, but just share
prsctp_chunk_event_table with fwdtsn's. It would drop fwdtsn chunk
for ifwdtsn and drop ifwdtsn chunk for fwdtsn by calling validate_ftsn
in sctp_sf_eat_fwd_tsn.

After this patch, the ifwdtsn can be accepted.

Note that this patch also removes the sctp.intl_enable check for
idata chunks in sctp_chunk_event_lookup, as it will do this check
in validate_data later.

Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo R. Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-15 13:52:22 -05:00
Xin Long
8e0c3b73ce sctp: implement generate_ftsn for sctp_stream_interleave
generate_ftsn is added as a member of sctp_stream_interleave, used to
create fwdtsn or ifwdtsn chunk according to abandoned chunks, called
in sctp_retransmit and sctp_outq_sack.

sctp_generate_iftsn works for ifwdtsn, and sctp_generate_fwdtsn is
still used for making fwdtsn.

Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo R. Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-15 13:52:21 -05:00
Xin Long
2d07a49ade sctp: add basic structures and make chunk function for ifwdtsn
sctp_ifwdtsn_skip, sctp_ifwdtsn_hdr and sctp_ifwdtsn_chunk are used to
define and parse I-FWD TSN chunk format, and sctp_make_ifwdtsn is a
function to build the chunk.

The I-FORWARD-TSN Chunk Format is defined in section 2.3.1 of RFC8260.

Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo R. Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-15 13:52:21 -05:00
Florian Fainelli
024778095a net: phy: phylink: Handle NULL fwnode_handle
Unlike the various of_* routines to fetch properties, fwnode_* routines can
have an early check against a NULL fwnode_handle reference which makes them
return -EINVAL (see fwnode_call_int_op), thus making it virtually impossible to
differentiate what type of error is going on.

Have an early check in phylink_register_sfp() so we can keep proceeding with
the initialization, there is not much we can do without a valid fwnode_handle
except return early and treat this similarly to -ENOENT.

Fixes: 8fa7b9b6af ("phylink: convert to fwnode")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-15 13:50:49 -05:00
Bjørn Mork
245d21190a qmi_wwan: set FLAG_SEND_ZLP to avoid network initiated disconnect
It has been reported that the dummy byte we add to avoid
ZLPs can be forwarded by the modem to the PGW/GGSN, and that
some operators will drop the connection if this happens.

In theory, QMI devices are based on CDC ECM and should as such
both support ZLPs and silently ignore the dummy byte.  The latter
assumption failed.  Let's test out the first.

Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-15 13:50:13 -05:00
Daniele Palmas
c647c0d62c net: usb: qmi_wwan: add Telit ME910 PID 0x1101 support
This patch adds support for Telit ME910 PID 0x1101.

Signed-off-by: Daniele Palmas <dnlplm@gmail.com>
Acked-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-15 13:46:10 -05:00
David S. Miller
d1fca67fee Merge branch 'net-sched-Make-qdisc-offload-uapi-uniform'
Yuval Mintz says:

====================
net: sched: Make qdisc offload uapi uniform

Several qdiscs can already be offloaded to hardware, but there's an
inconsistecy in regard to the uapi through which they indicate such
an offload is taking place - indication is passed to the user via
TCA_OPTIONS where each qdisc retains private logic for setting it.

The recent addition of offloading to RED in
602f3baf22 ("net_sch: red: Add offload ability to RED qdisc") caused
the addition of yet another uapi field for this purpose -
TC_RED_OFFLOADED.

For clarity and prevention of bloat in the uapi we want to eliminate
said added uapi, replacing it with a common mechanism that can be used
to reflect offload status of the various qdiscs.

The first patch introduces TCA_HW_OFFLOAD as the generic message meant
for this purpose. The second changes the current RED implementation into
setting the internal bits necessary for passing it, and the third removes
TC_RED_OFFLOADED as its no longer needed.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-15 13:35:37 -05:00
Yuval Mintz
4a98795bc8 pkt_sched: Remove TC_RED_OFFLOADED from uapi
Following the previous patch, RED is now using the new uniform uapi
for indicating it's offloaded. As a result, TC_RED_OFFLOADED is no
longer utilized by kernel and can be removed [as it's still not
part of any stable release].

Fixes: 602f3baf22 ("net_sch: red: Add offload ability to RED qdisc")
Signed-off-by: Yuval Mintz <yuvalm@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-15 13:35:37 -05:00
Yuval Mintz
428a68af3a net: sched: Move to new offload indication in RED
Let RED utilize the new internal flag, TCQ_F_OFFLOADED,
to mark a given qdisc as offloaded instead of using a dedicated
indication.

Also, change internal logic into looking at said flag when possible.

Fixes: 602f3baf22 ("net_sch: red: Add offload ability to RED qdisc")
Signed-off-by: Yuval Mintz <yuvalm@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-15 13:35:36 -05:00
Yuval Mintz
7a4fa29106 net: sched: Add TCA_HW_OFFLOAD
Qdiscs can be offloaded to HW, but current implementation isn't uniform.
Instead, qdiscs either pass information about offload status via their
TCA_OPTIONS or omit it altogether.

Introduce a new attribute - TCA_HW_OFFLOAD that would form a uniform
uAPI for the offloading status of qdiscs.

Signed-off-by: Yuval Mintz <yuvalm@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-15 13:35:36 -05:00
Colin Ian King
82f67bc6be net: alteon: acenic: clean up indentation issue
There is a hunk of code that is incorrectly indented with spaces
and rather than a tab.  Clean this up.

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-15 13:28:30 -05:00
David S. Miller
f3ac015346 Merge branch 'sfp-SFF-module-support'
Russell King says:

====================
Add SFF module support

Add support for SFF modules.  SFF modules are similar to SFP modules,
but they have fewer control signals, and are soldered down rather than
pluggable.

They also have different IDs in the EEPROM to identify as soldered down
SFF modules.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-15 13:23:22 -05:00
Russell King
259c8618b0 sfp: add sff module support
Add support for SFF modules, which are soldered down SFP modules.
These have a different phys_id value, and also have the present and
rate select signals omitted compared with their socketed counter-parts.

Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-15 13:23:22 -05:00
Russell King
512dc8fed9 dt-bindings: add sff,sff binding for SFP support
Add "sff,sff" for SFF module support with SFP.  These have a different
phys_id value, and also have the present and rate select signals omitted
compared with their socketed counter-parts.

Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-15 13:23:22 -05:00
David S. Miller
b4cf6a0a23 Merge branch 'nfp-fix-rtsym-and-XPB-register-handling-in-debug-dump'
Simon Horman says:

====================
nfp: fix rtsym and XPB register handling in debug dump

this series resolves two problems in the recently added debug dump facility.

* Correctly handle reading absolute rtysms
* Correctly handle special-case PB register reads

These fixes are for code only present in net-next.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-15 12:48:46 -05:00
Carl Heymann
28b2d7d04b nfp: fix XPB register reads in debug dump
For XPB registers reads, some island IDs require special handling (e.g.
ARM island), which is already taken care of in nfp_xpb_readl(), so use
that instead of a straight CPP read.

Without this fix all "xpbm:ArmIsldXpbmMap.*" registers are reported as
0xffffffff. It has also been observed to cause a system reboot.

With this fix correct values are reported, none of which are 0xffffffff.

The values may be read using ethtool debug level 2.
 # ethtool -W <netdev> 2
 # ethtool -w <netdev> data dump.dat

Fixes: 0e6c4955e1 ("nfp: dump CPP, XPB and direct ME CSRs")
Signed-off-by: Carl Heymann <carl.heymann@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-15 12:48:45 -05:00