Commit graph

932,869 commits

Author SHA1 Message Date
Viresh Kumar
1d0d064307 cpufreq: longhaul: Revert transition_delay_us to 200 ms
The commit e948bc8fbe ("cpufreq: Cap the default transition delay
value to 10 ms") caused a regression on EPIA-M min-ITX computer where
shutdown or reboot hangs occasionally with a print message like:

longhaul: Warning: Timeout while waiting for idle PCI bus
cpufreq: __target_index: Failed to change cpu frequency: -16

This probably happens because the cpufreq governor tries to change the
frequency of the CPU faster than allowed by the hardware.

Before the above commit, the default transition delay was set to 200 ms
for a transition_latency of 200000 ns. Lets revert back to that
transition delay value to fix it. Note that several other transition
delay values were tested like 20 ms and 30 ms and none of them have
resolved system hang issue completely.

Fixes: e948bc8fbe (cpufreq: Cap the default transition delay value to 10 ms)
Reported-by: Meelis Roos <mroos@linux.ee>
Suggested-by: Rafael J. Wysocki <rjw@rjwysocki.net>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-12-13 01:37:09 +01:00
Geert Uytterhoeven
001d50c9a1 PM / Domains: Remove obsolete "samsung,power-domain" check
Currently the generic PM Domain code code checks for the presence of
both (generic) "power-domains" and (Samsung Exynos legacy)
"samsung,power-domain" properties in all device tree nodes representing
devices.

There are two issues with this:
  1. This imposes a small boot-time penalty on all platforms using DT,
  2. Platform-specific checks do not really belong in core framework
     code.

Remove the platform-specific check, as the last user of
"samsung,power-domain" was removed in commit 46dcf0ff0d ("ARM:
dts: exynos: Remove exynos4415.dtsi").  All other users were converted
before in commit 0da6587041 ("ARM: dts: convert to generic power
domain bindings for exynos DT").

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-12-13 01:34:47 +01:00
Bjørn Mork
6993ce46c9 ACPI: battery: Drop redundant test for failure
Merging the two adjacent conditionally built blocks makes the code
a lot more readable.  And as a bonus, we drop a duplicate test when
CONFIG_ACPI_PROCFS_POWER is undefined.

Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-12-13 01:14:54 +01:00
Prarit Bhargava
0f27cff859 ACPI: sysfs: Make ACPI GPE mask kernel parameter cover all GPEs
The acpi_mask_gpe= kernel parameter documentation states that the range
of mask is 128 GPEs (0x00 to 0x7F).  The acpi_masked_gpes mask is a u64 so
only 64 GPEs (0x00 to 0x3F) can really be masked.

Use a bitmap of size 0xFF instead of a u64 for the GPE mask so 256
GPEs can be masked.

Fixes: 9c4aa1eecb (ACPI / sysfs: Provide quirk mechanism to prevent GPE flooding)
Signed-off-by: Prarit Bharava <prarit@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-12-13 01:11:33 +01:00
Arvind Yadav
e8894f5578 ACPI / PMIC: constify platform_device_id
platform_device_id are not supposed to change at runtime. All functions
working with platform_device_id provided by <linux/platform_device.h>
work with const platform_device_id. So mark the non-const structs as
const.

Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-12-13 01:06:59 +01:00
Hans de Goede
9e811e19a7 ACPI: button: Add a LID switch blacklist and add 1 model to it
The GP-electronic T701 tablet does not have a LID switch, but it
does define a LID device in its DSDT. The _LID method points to
the "\\_SB.GPO2" pin 0x18 GPIO with a pull setting of "PullDefault",
which leaves the pin floating.

This causes the ACPI button driver to cause spurious LID closed events,
causing the device to suspend while the user is using it. There is
nothing the ACPI button driver (or the gpio code) can do to fix this,
so the only solution is to add a DMI based blacklist and ignore the LID
device on these tablets.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-12-13 01:05:02 +01:00
Hans de Goede
ae35d656d7 ACPI: button: Add a debug message when we're sending a LID event
I've been debugging some spurious suspend issues on various devices,
at least on some devices these spurious suspends are caused by surious
LID closed events being send to userspace.

Running e.g. evemu-record after noticing a spurious suspend is too late
to detect that a LID closed event it the (probable) cause of this.

This commit adds an acpi_handle_debug call to help debugging this.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-12-13 01:05:01 +01:00
Yixun Lan
d72ebbcc44 pinctrl: meson-axg: adjust spicc pin naming
According to datasheet, we should use numbers for the pin naming
instead of letters. The patch here try to fix this to keep
the consistency.

This patch should not bring any functional change.

Fixes: 83c566806a ("pinctrl: meson-axg: Add new pinctrl driver for Meson AXG SoC")
Suggested-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Yixun Lan <yixun.lan@amlogic.com>
Acked-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-12-13 00:52:49 +01:00
Hou Zhiqiang
59b356ffd0 mtd: m25p80: restore the status of SPI flash when exiting
Restore the status to be compatible with legacy devices.
Take Freescale eSPI boot for example, it copies (in 3 Byte
addressing mode) the RCW and bootloader images from SPI flash
without firing a reset signal previously, so the reboot command
will fail without resetting the addressing mode of SPI flash.
This patch implements .shutdown function to restore the status
in reboot process, and add the same operation to the .remove
function.

Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
Signed-off-by: Cyrille Pitchen <cyrille.pitchen@wedev4u.fr>
2017-12-13 00:36:00 +01:00
Hou Zhiqiang
8dee1d971a mtd: spi-nor: add an API to restore the status of SPI flash chip
Add this API to restore the status of SPI flash chip to the default
such as addressing mode, whenever detach the driver from device or
reboot the system.

Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
Signed-off-by: Cyrille Pitchen <cyrille.pitchen@wedev4u.fr>
2017-12-13 00:36:00 +01:00
Aaron Sierra
2666067fdb mtd: spi-nor: Check that BP bits are set properly
Previously, the lock and unlock functions returned success even if the
BP bits were not actually updated in the status register due to
hardware write protection. Introduce write_sr_and_check() to write and
read back the status register to ensure the desired BP bits are
actually set as requested.

Signed-off-by: Joe Schultz <jschultz@xes-inc.com>
Signed-off-by: Aaron Sierra <asierra@xes-inc.com>
Signed-off-by: Cyrille Pitchen <cyrille.pitchen@wedev4u.fr>
2017-12-13 00:36:00 +01:00
Bean Huo (beanhuo)
20ccb993f2 mtd: spi-nor: check FSR error bits for Micron memories
For Micron spi nor device, when erase/program operation
fails, especially the failure results from intending to
modify protected space, spi-nor upper layers still get
the return which shows the operation succeeds. This is
because current spi_nor_fsr_ready() only uses FSR bit.7
(flag status register) to check device whether ready.
This patch fixes this issue by checking relevant error
bits in FSR.
The FSR is a powerful tool to investigate the status of
device, checking information regarding what the memory is
actually doing and detecting possible error conditions.

Signed-off-by: beanhuo <beanhuo@micron.com>
Signed-off-by: Cyrille Pitchen <cyrille.pitchen@wedev4u.fr>
2017-12-13 00:36:00 +01:00
Fabio Estevam
6d17969c8e dt-bindings: mtd: fsl-quadspi: Pass the qspi clock names
In order to improve the bindings documentation, explicitly pass the name
of the clocks: "qspi_en" and "qspi", which are mandatory.

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Cyrille Pitchen <cyrille.pitchen@wedev4u.fr>
2017-12-13 00:36:00 +01:00
Angelo Dureghello
34354d4bf8 mtd: spi-nor: add support for ISSI is25lp128
Add support for ISSI is25lp128 spi nor flash.

Signed-off-by: Angelo Dureghello <angelo@sysam.it>
Signed-off-by: Cyrille Pitchen <cyrille.pitchen@wedev4u.fr>
2017-12-13 00:35:59 +01:00
David Lechner
00644f9bd3 dt-bindings: Add optional nvmem BD address bindings to ti,wlink-st
This adds optional nvmem consumer properties to the ti,wlink-st device tree
bindings to allow specifying the BD address.

Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: David Lechner <david@lechnology.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2017-12-13 00:28:42 +01:00
David Lechner
aa09939869 Bluetooth: hci_ll: add support for setting public address
This adds support for setting the public address on Texas Instruments
Bluetooth chips using a vendor-specific command.

This has been tested on a CC2560A chip. The TI wiki also indicates that
this command should work on TI WL17xx/WL18xx Bluetooth chips.

During review, there was some question as to the correctness of the byte
swapping since TI's documentation is not clear on this matter. This can
be tested with the btmgmt utility from bluez. The adapter must be powered
off to change the address. If the baswap() is omitted, address is reversed.

In case there is a issue in the future, here is the output of btmon during
the command `btmgmt public-addr 00:11:22:33:44:55`:

Bluetooth monitor ver 5.43
= Note: Linux version 4.15.0-rc2-08561-gcb132a1-dirty (armv5tejl)      0.707043
= Note: Bluetooth subsystem version 2.22                               0.707091
= New Index: 00:17:E7:BD:1C:8E (Primary,UART,hci0)              [hci0] 0.707106
@ MGMT Open: btmgmt (privileged) version 1.14                 {0x0002} 0.707124
@ MGMT Open: bluetoothd (privileged) version 1.14             {0x0001} 0.707137
@ MGMT Open: btmon (privileged) version 1.14                  {0x0003} 0.707540
@ MGMT Command: Set Public Address (0x0039) plen 6    {0x0002} [hci0] 11.167991
        Address: 00:11:22:33:44:55 (CIMSYS Inc)
@ MGMT Event: Command Complete (0x0001) plen 7        {0x0002} [hci0] 11.175681
      Set Public Address (0x0039) plen 4
        Status: Success (0x00)
        Missing options: 0x00000000
@ MGMT Event: Index Removed (0x0005) plen 0           {0x0003} [hci0] 11.175757
@ MGMT Event: Index Removed (0x0005) plen 0           {0x0002} [hci0] 11.175757
@ MGMT Event: Index Removed (0x0005) plen 0           {0x0001} [hci0] 11.175757
= Open Index: 00:17:E7:BD:1C:8E                                [hci0] 11.176807
< HCI Command: Vendor (0x3f|0x0006) plen 6                     [hci0] 11.176975
        00 11 22 33 44 55                                .."3DU
> HCI Event: Command Complete (0x0e) plen 4                    [hci0] 11.188260
      Vendor (0x3f|0x0006) ncmd 1
        Status: Success (0x00)
...
< HCI Command: Read Local Version Info.. (0x04|0x0001) plen 0  [hci0] 11.189859
> HCI Event: Command Complete (0x0e) plen 12                   [hci0] 11.190732
      Read Local Version Information (0x04|0x0001) ncmd 1
        Status: Success (0x00)
        HCI version: Bluetooth 2.1 (0x04) - Revision 0 (0x0000)
        LMP version: Bluetooth 2.1 (0x04) - Subversion 6431 (0x191f)
        Manufacturer: Texas Instruments Inc. (13)
< HCI Command: Read BD ADDR (0x04|0x0009) plen 0               [hci0] 11.191027
> HCI Event: Command Complete (0x0e) plen 10                   [hci0] 11.192101
      Read BD ADDR (0x04|0x0009) ncmd 1
        Status: Success (0x00)
        Address: 00:11:22:33:44:55 (CIMSYS Inc)
...

Signed-off-by: David Lechner <david@lechnology.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2017-12-13 00:28:42 +01:00
Jaganath Kanakkassery
94386b6a5b Bluetooth: Remove redundant disable_advertising()
There is already __hci_req_disable_advertising() function for disabling,
so use it.

Signed-off-by: Jaganath Kanakkassery <jaganathx.kanakkassery@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2017-12-13 00:28:42 +01:00
Andy Shevchenko
8a95079448 Bluetooth: Utilize %*ph specifier
Instead of open coding byte-by-byte printing, re-use %*ph specifier.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2017-12-13 00:28:42 +01:00
David Lechner
c30b93eade Bluetooth: hci_ll: Add endianness conversion when setting baudrate
This adds an endianness conversion when setting the baudrate using a
vendor-specific command. Otherwise, bad things might happen on a big-
endian system.

Suggested-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: David Lechner <david@lechnology.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2017-12-13 00:28:41 +01:00
David Lechner
7c6ca1201e Bluetooth: hci_ll: add constant for vendor-specific command
This adds a #define for the vendor-specific HCI command to set the
baudrate instead of using the bare 0xff36 multiple times.

Signed-off-by: David Lechner <david@lechnology.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2017-12-13 00:28:41 +01:00
David Lechner
d54fdcf924 Bluetooth: serdev: hci_ll: Wait for CTS instead of using msleep
When a TI Bluetooth chip is reset, it takes about 100ms for the RTS line of
the chip to deassert. For my use case with a TI CC2560A chip, this delay
was not long enough and caused the local UART to never transmit at all (TI
AM1808 SoC UART2).

We can wait for the CTS signal using serdev_device_wait_for_cts() instead
of trying to guess using msleep().

Also changed the comment to be more informative while we are touching this
code.

Signed-off-by: David Lechner <david@lechnology.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2017-12-13 00:28:41 +01:00
David Lechner
059fb82307 Bluetooth: hci_ll: remove \n from kernel messages
The bt_* printk macros include a \n already, so we don't need extra ones
here.

Signed-off-by: David Lechner <david@lechnology.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2017-12-13 00:28:41 +01:00
Hans de Goede
b4cdaba274 Bluetooth: btsdio: Do not bind to non-removable BCM43341
BCM43341 devices soldered onto the PCB (non-removable) always (AFAICT)
use an UART connection for bluetooth. But they also advertise btsdio
support on their 3th sdio function, this causes 2 problems:

1) A non functioning BT HCI getting registered

2) Since the btsdio driver does not have suspend/resume callbacks,
mmc_sdio_pre_suspend will return -ENOSYS, causing mmc_pm_notify()
to react as if the SDIO-card is removed and since the slot is
marked as non-removable it will never get detected as inserted again.
Which results in wifi no longer working after a suspend/resume.

This commit fixes both by making btsdio ignore BCM43341 devices
when connected to a slot which is marked non-removable.

Cc: stable@vger.kernel.org
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2017-12-13 00:28:41 +01:00
Hans de Goede
c23fae1111 Bluetooth: hci_bcm: Add support for BCM2E72
The Asus T100HA laptop uses an ACPI HID of BCM2E72 for the bluetooth
part of the SDIO bcm43340 wifi/bt combo chip.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2017-12-13 00:28:41 +01:00
Loic Poulain
67b8fbead4 Bluetooth: btqcomsmd: Fix skb double free corruption
In case of hci send frame failure, skb is still owned
by the caller (hci_core) and then should not be freed.

This fixes crash on dragonboard-410c when sending SCO
packet. skb is freed by both btqcomsmd and hci_core.

Fixes: 1511cc750c ("Bluetooth: Introduce Qualcomm WCNSS SMD based HCI driver")
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2017-12-13 00:28:41 +01:00
Lukas Wunner
d73e172816 Bluetooth: hci_serdev: Init hci_uart proto_lock to avoid oops
John Stultz reports a boot time crash with the HiKey board (which uses
hci_serdev) occurring in hci_uart_tx_wakeup().  That function is
contained in hci_ldisc.c, but also called from the newer hci_serdev.c.
It acquires the proto_lock in struct hci_uart and it turns out that we
forgot to init the lock in the serdev code path, thus causing the crash.

John bisected the crash to commit 67d2f8781b ("Bluetooth: hci_ldisc:
Allow sleeping while proto locks are held"), but the issue was present
before and the commit merely exposed it.  (Perhaps by luck, the crash
did not occur with rwlocks.)

Init the proto_lock in the serdev code path to avoid the oops.

Stack trace for posterity:

Unable to handle kernel read from unreadable memory at 406f127000
[000000406f127000] user address but active_mm is swapper
Internal error: Oops: 96000005 [#1] PREEMPT SMP
Hardware name: HiKey Development Board (DT)
Call trace:
 hci_uart_tx_wakeup+0x38/0x148
 hci_uart_send_frame+0x28/0x38
 hci_send_frame+0x64/0xc0
 hci_cmd_work+0x98/0x110
 process_one_work+0x134/0x330
 worker_thread+0x130/0x468
 kthread+0xf8/0x128
 ret_from_fork+0x10/0x18

Link: https://lkml.org/lkml/2017/11/15/908
Reported-and-tested-by: John Stultz <john.stultz@linaro.org>
Cc: Ronald Tschalär <ronald@innovation.ch>
Cc: Rob Herring <rob.herring@linaro.org>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2017-12-13 00:28:41 +01:00
Hans de Goede
e7232d184c Bluetooth: btusb: Fix BT_HCIBTUSB_AUTOSUSPEND Kconfig option name
Fix: drivers/bluetooth/Kconfig:35:warning: multi-line strings not
supported warning.

Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2017-12-13 00:28:41 +01:00
Hans de Goede
eff2d68ca7 Bluetooth: btusb: Add a Kconfig option to enable USB autosuspend by default
On many laptops the btusb device is the only USB device not having USB
autosuspend enabled, this causes not only the HCI but also the USB
controller to stay awake, together using aprox. 0.4W of power.

Modern ultrabooks idle around 6W (at 50% screen brightness), 3.5W for
Apollo Lake devices. 0.4W is a significant chunk of this (7 / 11%).

The btusb driver already contains code to allow enabling USB autosuspend,
but currently leaves it up to the user / userspace to enable it. This
means that for most people it will not be enabled, leading to an
unnecessarily high power consumption.

Since enabling it is not entirely without risk of regressions, this
commit adds a Kconfig option so that Linux distributions can choose to
enable it by default. This commit also adds a module option so that when
distros receive bugs they can easily ask the user to disable it again
for easy debugging.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2017-12-13 00:28:40 +01:00
Markus Elfring
1b259904a2 Bluetooth: Use common error handling code in bt_init()
* Improve jump targets so that a bit of exception handling can be better
  reused at the end of this function.

* Adjust five condition checks.

This issue was detected by using the Coccinelle software.

Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2017-12-13 00:28:40 +01:00
Loic Poulain
ba8f359790 Bluetooth: hci_qca: Avoid setup failure on missing rampatch
Assuming that the original code idea was to enable in-band sleeping
only if the setup_rome method returns succes and run in 'standard'
mode otherwise, we should not return setup_rome return value which
makes qca_setup fail if no rampatch/nvm file found.

This fixes BT issue on the dragonboard-820C p4 which includes the
following QCA controller:
hci0: Product:0x00000008
hci0: Patch  :0x00000111
hci0: ROM    :0x00000302
hci0: SOC    :0x00000044

Since there is no rampatch for this controller revision, just make
it work as is.

Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2017-12-13 00:28:40 +01:00
Gustavo Padovan
1313f05419 Bluetooth: Remove myself from the MAINTAINERS file
It's been sometime I'm not involved in Bluetooth anymore but I never
got around to remove my name from it. Doing it now.

Thanks for all the fish! :)

Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2017-12-13 00:28:40 +01:00
Eric Dumazet
9147efcbe0 bpf: add schedule points to map alloc/free
While using large percpu maps, htab_map_alloc() can hold
cpu for hundreds of ms.

This patch adds cond_resched() calls to percpu alloc/free
call sites, all running in process context.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2017-12-12 15:27:22 -08:00
Linus Walleij
7d42762d8c i2c: imx: Include the right GPIO header
<linux/of_gpio.h> is not used in this file, by
<linux/gpio/consumer.h> is.

Someone is just lucky with their implicit includes.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-12-12 23:31:45 +01:00
Jean Delvare
45fd4470ba i2c: piix4: Fix port number check on release
The port number shift is still hard-coded to 1 while it now depends
on the hardware.

Thankfully 0 is always 0 no matter how you shift it, so this was a
bug without consequences.

Signed-off-by: Jean Delvare <jdelvare@suse.de>
Fixes: 0fe16195f8 ("i2c: piix4: Fix SMBus port selection for AMD Family 17h chips")
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-12-12 23:27:04 +01:00
Benjamin Gaignard
9c41e45218 i2c: stm32: Fix copyrights
Uniformize STMicroelectronics copyrights headers and add SPDX
identifier.

Signed-off-by: Benjamin Gaignard <benjamin.gaignard@st.com>
Acked-by: Alexandre TORGUE <alexandre.torgue@st.com>
Acked-by: Pierre-Yves MORDRET <pierre-yves.mordret@st.com>
Acked-by: M'boumba Cedric Madianga <cedric.madianga@gmail.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-12-12 23:16:04 +01:00
Wolfram Sang
a3fe09bc03 AT24 fixes for 4.15-rc3
-----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEEFp3rbAvDxGAT0sefEacuoBRx13IFAlopTtAACgkQEacuoBRx
 13KotRAAyO8Q5poK+XS/SiDCDUHSW+98kZP6wN2210+6LQ48EBA85cGmApdZn2tG
 918JK3y0sYUzto8EhHTadOnCT9wjOMyhRyxAPx8h2qGNm7ET2xTVWsV5GwNWdvCU
 YB9pD8h9+oSakNriNg5uNuLdNnTfVrhYn07dDp3x13uZQ9KfLV+JQtUYUOefZPpW
 Y/RBemDagFLFggwFR968B1TR+2BPcTc6E1BRiUowbIpNTI5507mo24IDTmaQfd/w
 KGMW0UIVO88aTOCQofFt0b80y0g7m6olt2LZZwVZR/Y8FP39OoTf/W7JeHMiatIw
 oFoEyloj96AcHJuV3g2Suc+/qb07oD3cwx09cKnId5j//x8MX9KnZnlfodcAS9Bz
 mcu0TvOSSwrU1vjkIBlkRuGXcnDVhbdOYzymZJ74cr21CznFRZo/Br9GvLI9VE9n
 zPpVD4Nm8UA6FzSPijFOQK97z1l2CP09XJ4tXu+1udGnebN/JtkD9LeVjO7nnv80
 cuEMBe9rgGIHzvAVCzt+rkBGvzKlkTyNVZoz0mPiRiHPKN73NBaahJrVlYXpd92I
 MJUxkvJlOal242pwLvbfcl9pK8y4Y74Is+z969tuQ6KQGNVGI9wizF9Gjbp+CHy5
 waVVGKVkg02s1ONj/iO5oJICWBfhQ3Slj3VTO8zftRr2Oj+3B+c=
 =E17D
 -----END PGP SIGNATURE-----

Merge tag 'at24-4.15-rc3-fixes-for-wolfram' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux into i2c/for-current

Sakari fixed a regression introduced during the 4.15 merge window and
David submitted a fix for an issue that has existed in at24 since
introducing nvmem.
2017-12-12 23:08:33 +01:00
Chris Wilson
59e4b19d62 drm/i915: Dump the engine state before declaring wedged from wait_for_engines()
If wait_for_engines() fails and we resort to declaring the HW wedged,
dump the engine state for debugging.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171211194135.27095-2-chris@chris-wilson.co.uk
2017-12-12 21:07:41 +00:00
Chris Wilson
ee42c00e1c drm/i915: Bump timeout for wait_for_engines()
Extract the timeout we use in i915_gem_idle_work_handler() and reuse it
for wait_for_engines() in i915_gem_wait_for_idle(). It too has the same
problem in sometimes having to wait for an extended period before the HW
settles, so make use of the same timeout.

References: 5427f20785 ("drm/i915: Bump wait-times for the final CS interrupt before parking")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171211194135.27095-1-chris@chris-wilson.co.uk
2017-12-12 21:07:41 +00:00
Chris Wilson
1875fe7ba1 drm/i915: Downgrade misleading "Memory usable" message
It never meant what it said, as it was always the total size of the
Global GTT and not a limit upon memory usage. Originally it served as a
quick guide to the largest batch that could be submitted by userspace,
an approximation to its maximum RSS, but was phrased badly. Today with
the 48b ppgtt, it is even more meaningless. Replace with a more specific
debug message; those wanting to know how much "video ram" they have
should consult the userspace libraries for the relevant approximation.

v2: Rebase

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171212113532.22574-1-chris@chris-wilson.co.uk
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
2017-12-12 21:07:41 +00:00
Chris Wilson
3ef98f50ca drm/i915: Print an error message for a reset failure on gen2
Since on gen2, we do not universally have a GPU reset implementation, we
fail i915_reset() at intel_has_gpu_reset(). However, this is also
intentionally disabled for CI testing and so it only has a debug
message. Promote that debug message to a user-facing error message that
should explain why their machine became unusable following the GPU hang.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171211204040.22858-1-chris@chris-wilson.co.uk
2017-12-12 21:07:40 +00:00
Ludovic Barre
aa199b7466 dt-bindings: arm: document supported STM32 SoC family
This adds a list of supported STM32 SoC bindings.

Signed-off-by: Gwenael Treuveur <gwenael.treuveur@st.com>
Signed-off-by: Ludovic Barre <ludovic.barre@st.com>
Signed-off-by: Rob Herring <robh@kernel.org>
2017-12-12 15:03:34 -06:00
Monk Liu
0507f438ea drm/amdgpu: fix MAP_QUEUES paramter
Should be 0.

Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-12-12 15:40:11 -05:00
Monk Liu
13d3fc69a0 drm/ttm: max_cpages is in unit of native page
fix calculation.

Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-12-12 15:39:45 -05:00
Monk Liu
a782fc8cc6 drm/ttm: fix incorrect calculate on shrink_pages
shrink_pages is in unit of Order after ttm_page_pool_free,
but it is used by nr_free in next round so need change
it into native page unit

Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Roger He <Hongbo.He@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-12-12 15:39:20 -05:00
Alex Deucher
74e1d67c73 drm/amdgpu: make function names consistent in nbio files
All functions should have nbio_v* prefix.

Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-12-12 14:50:17 -05:00
Frank Min
1cb4ca5968 drm/amdgpu: correct vce fw data and stack size
this fix the VCE world switch hang issue

Signed-off-by: Frank Min <Frank.Min@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-12-12 14:50:12 -05:00
Monk Liu
f4534f0654 drm/amdgpu: fix MAP_QUEUES paramter
Should be 0.

Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-12-12 14:50:05 -05:00
Monk Liu
d118a62153 drm/amdgpu: no need with INT for fence polling
We are polling so no need for INT.

Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-12-12 14:50:00 -05:00
Monk Liu
b9141cd393 drm/amdgpu: no need to evict VRAM in device_fini
this VRAM evict is not needed and also cost 2seconds
to finish because the IRQ is software side disabled
before it.

Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-12-12 14:49:56 -05:00
Monk Liu
a8d25a8629 drm/ttm: max_cpages is in unit of native page
fix calculation.

Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-12-12 14:48:52 -05:00