Commit graph

932,869 commits

Author SHA1 Message Date
Paul E. McKenney
a2f2577d96 torture: Eliminate torture_runnable and perf_runnable
The purpose of torture_runnable is to allow rcutorture and locktorture
to be started and stopped via sysfs when they are built into the kernel
(as in not compiled as loadable modules).  However, the 0444 permissions
for both instances of torture_runnable prevent this use case from ever
being put into practice.  Given that there have been no complaints
about this deficiency, it is reasonable to conclude that no one actually
makes use of this sysfs capability.  The perf_runnable module parameter
for rcuperf is in the same situation.

This commit therefore removes both torture_runnable instances as well
as perf_runnable.

Reported-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2017-12-11 09:18:29 -08:00
Paul E. McKenney
4ced3314fd torture: Make stutter less vulnerable to compilers and races
The stutter_wait() function repeatedly fetched stutter_pause_test, and
should really just fetch it once on each pass.  The races should be
harmless, but why have the races?  Also, the whole point of the value
"2" for stutter_pause_test is to get everyone to start at very nearly
the same time, but the value "2" was the first jiffy of the stutter
rather than the last jiffy of the stutter.

This commit rearranges the code to be more sensible.

Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2017-12-11 09:18:29 -08:00
Davidlohr Bueso
2ce77d16db locking/locktorture: Fix num reader/writer corner cases
Things can explode for locktorture if the user does combinations
of nwriters_stress=0 nreaders_stress=0. Fix this by not assuming
we always want to torture writer threads.

Reported-by: Jeremy Linton <jeremy.linton@arm.com>
Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Jeremy Linton <jeremy.linton@arm.com>
Tested-by: Jeremy Linton <jeremy.linton@arm.com>
2017-12-11 09:18:28 -08:00
Davidlohr Bueso
f2f762608f locking/locktorture: Fix rwsem reader_delay
We should account for nreader threads, not writers in this
callback. Could even trigger a div by 0 if the user explicitly
disables writers.

Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2017-12-11 09:18:28 -08:00
Paul E. McKenney
8f9dd83173 torture: Place all torture-test modules in one MAINTAINERS group
There is some confusion about where patches to kernel/torture.c
and kernel/locking/locktorture.c should be sent.  This commit
therefore updates MAINTAINERS appropriately.

Reported-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
2017-12-11 09:18:27 -08:00
SeongJae Park
af0695d3fc rcutorture/kvm-build.sh: Skip build directory check
Check for build-directory existence and write permissions are provided in
both 'kvm-test-1-run.sh' an 'kvm-build.sh'.  Because the 'kvm-build.sh'
is dependent on 'kvm-test-1-run.sh' ('kvm-build.sh' uses variables that
defined from its caller.), these checks are unnecessarily duplicated.
This commit therefore removes the check in from the 'kvm-build.sh' script.

Signed-off-by: SeongJae Park <sj38.park@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2017-12-11 09:18:27 -08:00
SeongJae Park
feef2d286a rcutorture: Simplify functions.sh include path
Inclusions of 'functions.sh' from 'kvm-test-1-run.sh' and
'kvm-recheck*.sh' use its absolute path.  Because the directory containing
'functions.sh' is already in PATH, the full path is unnecessary.  This
commit therefore simplifies the inclusions to use the short relative path.

Signed-off-by: SeongJae Park <sj38.park@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2017-12-11 09:18:26 -08:00
SeongJae Park
fa48beb5f4 rcutorture: Simplify logging
Both the 'kvm.sh' and 'kvm-test-1-run.sh' scripts log messages by printing
the message to 'stdout' and then also printing it into the log file.
Generation of the message thus occurs twice, once for 'stdout' and once
for the log file.  Moreover, many of the messages contain 'date' output,
which results in date being invoked twice (once for stdout print, once
for log file write).  As a result, the date information in stdout and
log file can differ, which could cause confusion.

This commit therefore simplifies the logging procedure by using 'tee'.

Signed-off-by: SeongJae Park <sj38.park@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2017-12-11 09:18:26 -08:00
SeongJae Park
81394e3f6d rcutorture/kvm-recheck-*: Improve result directory readability check
The kvm-recheck-(lock|rcu|rcuperf).sh scripts check whether the
user-specified results directory exists.  If not, it prints out error
message that says the specified directory is unreadable.  To make the
message more precise, this commit adds a readability check.

Fixes: 2193e1604e ("rcutorture: Abstract kvm-recheck.sh")

Signed-off-by: SeongJae Park <sj38.park@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2017-12-11 09:18:25 -08:00
SeongJae Park
512e3bd0b5 rcutorture/kvm.sh: Support execution from any directory
The 'kvm.sh' rcutorture script requires that it be invoked from the top
of Linux-kernel source tree.  It is just a subtle restriction, but users
using it for the first time could forget the restriction and be confused.
Moreover, it makes commands a little longer, which can be frustrating.
This commit therefore lets users invoke the script from any location.

Signed-off-by: SeongJae Park <sj38.park@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2017-12-11 09:18:25 -08:00
SeongJae Park
8dcd6f3fe2 rcutorture/kvm.sh: Use consistent help text for --qemu-args
The '--qemu-args' option's help text is wrongly copied from '--qemu-cmd'
option and its argument type description message format is inconsistent
with other arguments.  This commit fixes the usage and type messages to
be consistent with others.

Fixes: e9ce640001 ("rcutorture: Add --qemu-args argument to kvm.sh")

Signed-off-by: SeongJae Park <sj38.park@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2017-12-11 09:18:24 -08:00
SeongJae Park
e5ed531dca rcutorture/kvm.sh: Remove unused variable, alldone
The variable `alldone` is defined but not used within an awk script.
This commit therefore removes it.

Fixes:53954671033d ("rcutorture: Do better bin packing")

Signed-off-by: SeongJae Park <sj38.park@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2017-12-11 09:18:24 -08:00
SeongJae Park
3a0b3bbbff rcutorture: Remove unused script, config2frag.sh
The 'config2frag.sh' script is not used, so this commit removes it.

Fixes: c87b9c601a ("rcutorture: Add KVM-based test framework")

Signed-off-by: SeongJae Park <sj38.park@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2017-12-11 09:18:24 -08:00
SeongJae Park
2adfa4210f rcutorture/configinit: Fix build directory error message
The 'configinit.sh' script checks the format of optional argument for the
build directory, printing an error message if the format is not valid.
However, the error message uses the wrong variable, indicating an empty
string even though the user entered a non-empty (but erroneous) string.
This commit fixes the script to use the correct variable.

Fixes: c87b9c601a ("rcutorture: Add KVM-based test framework")

Signed-off-by: SeongJae Park <sj38.park@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2017-12-11 09:18:23 -08:00
Paul E. McKenney
e8302739aa rcutorture: Preempt RCU-preempt readers more vigorously
This commit attempts to make a very rare rcutorture failure happen
more often by increasing the fraction of RCU-preempt read-side critical
sections that are preempted.

Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2017-12-11 09:18:22 -08:00
Paul E. McKenney
cc1321c96f torture: Reduce #ifdefs for preempt_schedule()
This commit adds a torture_preempt_schedule() that is nothingness
in !PREEMPT builds and is preempt_schedule() otherwise.  Then
torture_preempt_schedule() is used to eliminate several ugly #ifdefs,
both in rcutorture and in locktorture.

Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2017-12-11 09:18:22 -08:00
Rakib Mullick
84b12b752f rcu: Remove have_rcu_nocb_mask from tree_plugin.h
Currently have_rcu_nocb_mask is used to avoid double allocation of
rcu_nocb_mask during boot up. Due to different representation of
cpumask_var_t on different kernel config CPUMASK=y(or n) it was okay.
But now we have a helper cpumask_available(), which can be utilized
to check whether rcu_nocb_mask has been allocated or not without using
a variable.

Removing the variable also reduces vmlinux size.

Unpatched version:
text	   data	    bss	    dec	    hex	filename
13050393	7852470	14543408	35446271	21cddff	vmlinux

Patched version:
 text	   data	    bss	    dec	    hex	filename
13050390	7852438	14543408	35446236	21cdddc	vmlinux

Signed-off-by: Rakib Mullick <rakib.mullick@gmail.com>
Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Lai Jiangshan <jiangshanlai@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2017-12-11 09:17:40 -08:00
Paul E. McKenney
efd88b02bb rcu: Add comment giving debug strategy for double call_rcu()
The following statement has for some reason proven non-intuitive:

	WARN_ON_ONCE(rcu_segcblist_empty(&rdp->cblist) != (count == 0));

This commit therefore adds a comment that states that this warning
usually triggers in response to a double call_rcu(), which is sort
of like a double free.  The comment also suggests building with
CONFIG_DEBUG_OBJECTS_RCU_HEAD=y to track down the double call_rcu().

Reported-by: David Howells <dhowells@redhat.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2017-12-11 09:17:39 -08:00
Steven Rostedt (VMware)
9122caf99b tracing, rcu: Hide trace event rcu_nocb_wake when not used
The trace event rcu_nocb_wake is only used when CONFIG_RCU_NOCB_CPU is
defined. But the trace event is defined regardless. As defined trace
events take up memory, it is a waste to have it defined when not used.
Surround the trace event with an #ifdef to have it only defined when it
is used.

Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2017-12-11 09:17:39 -08:00
Peter Ujfalusi
1239738fa3 ARM: dts: dra7: Add missing hdmi audio DMA channel information
The audio DMA request for hdmi is crossbar 76 and we use sDMA
to handle the data transfer.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2017-12-11 09:16:42 -08:00
David S. Miller
23202e0995 Merge branch 'nfp-dead-code-clean-ups-and-slight-improvements'
Jakub Kicinski says:

====================
nfp: dead code, clean ups and slight improvements

This series contains small clean ups from John and Carl, and brings
no functional changes.

John's improvements target the flower code.  First he makes sure we don't
allocate space in FW request messages for MAC matches if the TC rule does
not contain any.  The remaining two patches remove some dead code and
unused defines.

Carl follows up with a slight optimization to his recent ethtool FW state
dumps, byte swapping input parameters once instead of the data for every
dumped item.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-11 12:08:23 -05:00
Carl Heymann
92a54f4a47 nfp: debug dump - decrease endian conversions
Convert the requested dump level parameter to big-endian at the start of
nfp_net_dump_calculate_size() and nfp_net_dump_populate_buffer(), then
compare and assign it directly where needed in the traversal and prolog
code. This decreases the total number of conversions used.

Signed-off-by: Carl Heymann <carl.heymann@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-11 12:08:13 -05:00
John Hurley
197171e5ba nfp: flower: remove unused defines
Delete match field defines that are not supported at this time.

Signed-off-by: John Hurley <john.hurley@netronome.com>
Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-11 12:08:04 -05:00
John Hurley
a427673e1f nfp: flower: remove dead code paths
Port matching is selected by default on every rule so remove check for it
and delete 'else' side of the statement. Remove nfp_flower_meta_one as now
it will not feature in the code. Rename nfp_flower_meta_two given that one
has been removed.

'Additional metadata' if statement can never be true so remove it as well.

Signed-off-by: John Hurley <john.hurley@netronome.com>
Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-11 12:07:57 -05:00
John Hurley
de7d954984 nfp: flower: do not assume mac/mpls matches
Remove the matching of mac/mpls as a default selection. These are not
necessarily set by a TC rule (unlike the port). Previously a mac/mpls
field would exist in every match and be masked out if not used. This patch
has no impact on functionality but removes unnessary memory assignment in
the match cmsg.

Signed-off-by: John Hurley <john.hurley@netronome.com>
Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-11 12:07:47 -05:00
Kevin Cernekee
93c647643b netlink: Add netns check on taps
Currently, a nlmon link inside a child namespace can observe systemwide
netlink activity.  Filter the traffic so that nlmon can only sniff
netlink messages from its own netns.

Test case:

    vpnns -- bash -c "ip link add nlmon0 type nlmon; \
                      ip link set nlmon0 up; \
                      tcpdump -i nlmon0 -q -w /tmp/nlmon.pcap -U" &
    sudo ip xfrm state add src 10.1.1.1 dst 10.1.1.2 proto esp \
        spi 0x1 mode transport \
        auth sha1 0x6162633132330000000000000000000000000000 \
        enc aes 0x00000000000000000000000000000000
    grep --binary abc123 /tmp/nlmon.pcap

Signed-off-by: Kevin Cernekee <cernekee@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-11 11:58:18 -05:00
Thomas Petazzoni
2aab6b40b0 net: sh_eth: do not advertise Gigabit capabilities when not available
Not all variants of the sh_eth hardware have Gigabit
support. Unfortunately, the current driver doesn't tell the PHY about
the limited MAC capabilities. Due to this, if you have a Gigabit
capable PHY, the PHY will advertise its Gigabit capability and
establish a link at 1Gbit/s, even though the MAC doesn't support it.

In order to avoid this, we use the recently introduced
phy_set_max_speed() to tell the PHY to not advertise speed higher than
100 MBit/s.

Tested on a SH7786 platform, with a Gigabit PHY.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-11 11:53:55 -05:00
Hans de Goede
ebb82e3c79 ahci: Allow setting a default LPM policy for mobile chipsets
On many laptops setting a different LPM policy then unknown /
max_performance can lead to power-savings of 1.0 - 1.5 Watts (when idle).

Modern ultrabooks idle around 6W (at 50% screen brightness), 1.0 - 1.5W
is a significant chunk of this.

There are some performance / latency costs to enabling LPM by default,
so it is desirable to make it possible to set a different LPM policy
for mobile / laptop variants of chipsets / "South Bridges" vs their
desktop / server counterparts. Also enabling LPM by default is not
entirely without risk of regressions. At least min_power is known to
cause issues with some disks, including some reports of data corruption.

This commits adds a new ahci.mobile_lpm_policy kernel cmdline option,
which defaults to a new SATA_MOBILE_LPM_POLICY Kconfig option so that
Linux distributions can choose to set a LPM policy for mobile chipsets
by default.

The reason to have both a kernel cmdline option and a Kconfig default
value for it, is to allow easy overriding of the default to allow
trouble-shooting without needing to rebuild the kernel.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2017-12-11 08:53:33 -08:00
NeilBrown
474beb575c md/raid1,raid10: silence warning about wait-within-wait
If you prepare_to_wait() after a previous prepare_to_wait(),
but before calling schedule(), you get warning:

  do not call blocking ops when !TASK_RUNNING; state=2

This is appropriate as it is often a bug.  The event that the
first prepare_to_wait() expects might wake up the schedule following
the second prepare_to_wait(), which could be confusing.

However if both prepare_to_wait()s are part of simple wait_event()
loops, and if the inner one is rarely called, then there is
no problem.  The inner loop is too simple to get confused by
a stray wakeup, and the outer loop won't spin unduly because the
inner doesnt affect it often.

This pattern occurs in both raid1.c and raid10.c in the use of
flush_pending_writes().

The warning can be silenced by setting current->state to TASK_RUNNING.

Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Shaohua Li <shli@fb.com>
2017-12-11 08:52:34 -08:00
Song Liu
d5d885fd51 md: introduce new personality funciton start()
In do_md_run(), md threads should not wake up until the array is fully
initialized in md_run(). However, in raid5_run(), raid5-cache may wake
up mddev->thread to flush stripes that need to be written back. This
design doesn't break badly right now. But it could lead to bad bug in
the future.

This patch tries to resolve this problem by splitting start up work
into two personality functions, run() and start(). Tasks that do not
require the md threads should go into run(), while task that require
the md threads go into start().

r5l_load_log() is moved to raid5_start(), so it is not called until
the md threads are started in do_md_run().

Signed-off-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Shaohua Li <shli@fb.com>
2017-12-11 08:52:34 -08:00
Roger Quadros
b8c9c6fa20 ARM: dts: dra7: Disable USB metastability workaround for USB2
The metastability workaround causes Erratic errors [1]
on the HighSpeed USB PHY which can cause upto 2 seconds
delay in enumerating to a USB host while in Gadget mode.

Disable the Run/Stop metastability workaround to avoid this
ill effect. We are aware that this opens up the opportunity
for Run/Stop metastability, however this issue has never been
observed in TI releases so we think that Run/Stop metastability
is a lesser evil than the PHY Erratic errors. So disable it.

[1] USB controller trace during gadget enumeration
    irq/90-dwc3-969   [000] d...    52.323145: dwc3_event: event
    (00000901): Erratic Error [U0]
    irq/90-dwc3-969   [000] d...    52.560646: dwc3_event: event
    (00000901): Erratic Error [U0]
    irq/90-dwc3-969   [000] d...    52.798144: dwc3_event: event
    (00000901): Erratic Error [U0]

Signed-off-by: Roger Quadros <rogerq@ti.com>
Acked-by: Felipe Balbi <felipe.balbi@linux/intel.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2017-12-11 08:46:53 -08:00
Adam Ford
5f9ca11f25 ARM: dts: omap3: logicpd kits: Remove partition information
Since U-Boot passes this information to the kernel, let's remove
the partition information from the device tree for
logicpd-torpedo-37xx-devkit and logicpd-som-lv-37xx-devkit

Signed-off-by: Adam Ford <aford173@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2017-12-11 08:44:12 -08:00
Keerthy
aac4619d02 ARM: dts: DRA76-EVM: Set powerhold property for tps65917
Set powerhold property for tps65917

Signed-off-by: Keerthy <j-keerthy@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2017-12-11 08:43:22 -08:00
Tero Kristo
80a06c0d83 ARM: dts: dm816x: add clkctrl nodes
Add clkctrl nodes for DM816x SoC. These are going to be acting as
replacement for part of the existing clock data and the existing
clkctrl hooks under hwmod data.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2017-12-11 08:28:37 -08:00
Tero Kristo
bb30465b59 ARM: dts: dm814x: add clkctrl nodes
Add clkctrl nodes for DM814x SoC. These are going to be acting as
replacement for part of the existing clock data and the existing
clkctrl hooks under hwmod data.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2017-12-11 08:28:37 -08:00
Tero Kristo
664ae1ab25 ARM: dts: am43xx: add clkctrl nodes
Add clkctrl nodes for AM43xx SoC. These are going to be acting as
replacement for part of the existing clock data and the existing
clkctrl hooks under hwmod data.

This patch also removes any obsolete clock nodes, and reroutes all users
for these to use the new clkctrl clocks instead.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2017-12-11 08:28:37 -08:00
Tero Kristo
0537634f7e ARM: dts: am33xx: add clkctrl nodes
Add clkctrl nodes for AM33xx SoC. These are going to be acting as
replacement for part of the existing clock data and the existing
clkctrl hooks under hwmod data.

This patch also removes any obsolete clock nodes, and reroutes all users
for these to use the new clkctrl clocks instead.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2017-12-11 08:28:36 -08:00
Tero Kristo
1839533f69 ARM: dts: dra7: add clkctrl nodes
Add clkctrl nodes for DRA7 SoC. These are going to be acting as
replacement for part of the existing clock data and the existing
clkctrl hooks under hwmod data.

This patch also removes any obsolete clock nodes, and reroutes all users
for these to use the new clkctrl clocks instead.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2017-12-11 08:28:36 -08:00
Tero Kristo
460c49610d ARM: dts: omap5: add clkctrl nodes
Add clkctrl nodes for OMAP5 SoC. These are going to be acting as
replacement for part of the existing clock data and the existing
clkctrl hooks under hwmod data.

This patch also removes any obsolete clock nodes, and reroutes all users
for these to use the new clkctrl clocks instead.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2017-12-11 08:28:35 -08:00
Tero Kristo
a5c82a09d8 ARM: dts: omap4: add clkctrl nodes
Add clkctrl nodes for OMAP4 SoC. These are going to be acting as
replacement for part of the existing clock data and the existing
clkctrl hooks under hwmod data.

This patch also removes any obsolete clock nodes, and reroutes all users
for these to use the new clkctrl clocks instead.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2017-12-11 08:28:35 -08:00
Tero Kristo
519262cf56 ARM: dts: dm816x: add bus functionality to base PRCM node
Add simple-bus compatibility and ranges properties to prcm node. This is
done in preparation of adding the support for clkctrl nodes.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2017-12-11 08:28:34 -08:00
Tero Kristo
b535f4e510 ARM: dts: am43xx: add bus functionality to base PRCM node
Add simple-bus compatibility and ranges properties to prcm node. This is
done in preparation of adding the support for clkctrl nodes.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2017-12-11 08:28:34 -08:00
Tero Kristo
0768c9df8e ARM: dts: am33xx: add bus functionality to base PRCM node
Add simple-bus compatibility and ranges properties to prcm node. This is
done in preparation of adding the support for clkctrl nodes.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2017-12-11 08:28:34 -08:00
Tero Kristo
aa29e3a492 ARM: dts: dra7: add bus functionality to base PRCM nodes
Add simple-bus compatibility and ranges properties to cm1, cm2 and prm
nodes. This is done in preparation of adding the support for clkctrl
nodes.

SPLIT: timer1 fck setup

Signed-off-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2017-12-11 08:28:33 -08:00
Tero Kristo
d007d6557f ARM: dts: omap4: add bus functionality to base PRCM nodes
Add simple-bus compatibility and ranges properties to cm1, cm2 and prm
nodes. This is done in preparation of adding the support for clkctrl
nodes.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2017-12-11 08:28:33 -08:00
Tero Kristo
7fcf1c9b24 ARM: dts: omap5: add bus functionality to base PRCM nodes
Add simple-bus compatibility and ranges properties to cm_core_aon, cm_core
and prm nodes. This is done in preparation of adding the support for
clkctrl nodes.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2017-12-11 08:28:32 -08:00
Tero Kristo
ed839c3664 ARM: dts: dm816x: add fck under timers1/2
Add the functional clock definition for timers1/2. This is needed so that
the clock rate claculations continue to function properly once dm816x
transitions away from hwmod data and towards the clkctrl clocks.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2017-12-11 08:28:31 -08:00
Tero Kristo
5277c033af ARM: dts: dm814x: add fck under timers1/2
Add the functional clock definition for timers1/2. This is needed so that
the clock rate claculations continue to function properly once dm814x
transitions away from hwmod data and towards the clkctrl clocks.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2017-12-11 08:28:29 -08:00
Tero Kristo
139e9a6376 ARM: dts: dra7: add fck under timer1
Add the functional clock definition for timer1. This is needed so that
the clock rate calculations continue to function properly once dra7
transitions away from hwmod data and towards the clkctrl clocks.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2017-12-11 08:28:28 -08:00
Tero Kristo
ab44c5b481 ARM: dts: am43xx: add fck under timers1/2
Add the functional clock definition for timers1/2. This is needed so that
the clock rate calculations continue to function properly once am33xx
transitions away from hwmod data and towards the clkctrl clocks.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2017-12-11 08:28:28 -08:00