This is an initial version of the PCM186x codec driver supporting both
2-channel and 4-channel device variants. Not all device features are
supported yet such as master/slave mode PLL configuration for which the
codec driver currently relies on the PCM186x built-in clock
auto-detection feature or the connection of digital microphones.
However here is what's here and what should work:
- Support for SPI and I2C low-level interfaces
- Regmap support and basic register definitions
- Input Mixer and Mux selection
- I2C, LJ, and TDM DAI format support
Signed-off-by: Andreas Dannenberg <dannenberg@ti.com>
Signed-off-by: Michael Stecklein <m-stecklein@ti.com>
Signed-off-by: Andrew F. Davis <afd@ti.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Geert reported commit ae6b289a37 ("kbuild: Set KBUILD_CFLAGS before
incl. arch Makefile") broke cross-compilation using a cross-compiler
that supports less compiler options than the host compiler.
For example,
cc1: error: unrecognized command line option "-Wno-unused-but-set-variable"
This problem happens on architectures that setup CROSS_COMPILE in their
arch/*/Makefile.
Move the cc-option and cc-disable-warning back to the original position,
but keep the Clang target options untouched.
Fixes: ae6b289a37 ("kbuild: Set KBUILD_CFLAGS before incl. arch Makefile")
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Tested-by: Geert Uytterhoeven <geert@linux-m68k.org>
The Texas Instruments TAS6424 device is a high-efficiency quad-channel
Class-D audio power amplifier. Its digital time division multiplexed
(TDM) interface enables up to 2 devices to share the same bus,
supporting a total of eight channels from one audio serial port.
Signed-off-by: Andreas Dannenberg <dannenberg@ti.com>
Signed-off-by: Michael Stecklein <m-stecklein@ti.com>
Signed-off-by: Andrew F. Davis <afd@ti.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Add the bindings for the TAS6424 digital amplifier.
Signed-off-by: Michael Stecklein <m-stecklein@ti.com>
Signed-off-by: Andrew F. Davis <afd@ti.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
kexec can leave MMU registers set when booting into a new kernel,
the PIDR (Process Identification Register) in particular. The boot
sequence does not zero PIDR, so it only gets set when CPUs first
switch to a userspace processes (until then it's running a kernel
thread with effective PID = 0).
This leaves a window where a process table entry and page tables are
set up due to user processes running on other CPUs, that happen to
match with a stale PID. The CPU with that PID may cause speculative
accesses that address quadrant 0 (aka userspace addresses), which will
result in cached translations and PWC (Page Walk Cache) for that
process, on a CPU which is not in the mm_cpumask and so they will not
be invalidated properly.
The most common result is the kernel hanging in infinite page fault
loops soon after kexec (usually in schedule_tail, which is usually the
first non-speculative quadrant 0 access to a new PID) due to a stale
PWC. However being a stale translation error, it could result in
anything up to security and data corruption problems.
Fix this by zeroing out PIDR at boot and kexec.
Fixes: 7e381c0ff6 ("powerpc/mm/radix: Add mmu context handling callback for radix")
Cc: stable@vger.kernel.org # v4.7+
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
__restore_processor_context() had a couple of ordering bugs. It
restored GSBASE after calling load_gs_index(), and the latter can
call into tracing code. It also tried to restore segment registers
before restoring the LDT, which is straight-up wrong.
Reorder the code so that we restore GSBASE, then the descriptor
tables, then the segments.
This fixes two bugs. First, it fixes a regression that broke resume
under certain configurations due to irqflag tracing in
native_load_gs_index(). Second, it fixes resume when the userspace
process that initiated suspect had funny segments. The latter can be
reproduced by compiling this:
// SPDX-License-Identifier: GPL-2.0
/*
* ldt_echo.c - Echo argv[1] while using an LDT segment
*/
int main(int argc, char **argv)
{
int ret;
size_t len;
char *buf;
const struct user_desc desc = {
.entry_number = 0,
.base_addr = 0,
.limit = 0xfffff,
.seg_32bit = 1,
.contents = 0, /* Data, grow-up */
.read_exec_only = 0,
.limit_in_pages = 1,
.seg_not_present = 0,
.useable = 0
};
if (argc != 2)
errx(1, "Usage: %s STRING", argv[0]);
len = asprintf(&buf, "%s\n", argv[1]);
if (len < 0)
errx(1, "Out of memory");
ret = syscall(SYS_modify_ldt, 1, &desc, sizeof(desc));
if (ret < -1)
errno = -ret;
if (ret)
err(1, "modify_ldt");
asm volatile ("movw %0, %%es" :: "rm" ((unsigned short)7));
write(1, buf, len);
return 0;
}
and running ldt_echo >/sys/power/mem
Without the fix, the latter causes a triple fault on resume.
Fixes: ca37e57bbe ("x86/entry/64: Add missing irqflags tracing to native_load_gs_index()")
Reported-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lkml.kernel.org/r/6b31721ea92f51ea839e79bd97ade4a75b1eeea2.1512057304.git.luto@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
acpi_os_get_root_pointer() may return a valid address even if acpi_disabled
is set, but the host bridge information from the ACPI tables is not going
to be used in that case and the Broadcom host bridge initialization should
not be skipped then, So make broadcom_postcore_init() check acpi_disabled
too to avoid this issue.
Fixes: 6361d72b04 (x86/PCI: read Broadcom CNB20LE host bridge info before PCI scan)
Reported-by: Dave Hansen <dave.hansen@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Linux PCI <linux-pci@vger.kernel.org>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/3186627.pxZj1QbYNg@aspire.rjw.lan
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The size for the Microcode Patch Block (MPB) for an AMD family 17h
processor is 3200 bytes. Add a #define for fam17h so that it does
not default to 2048 bytes and fail a microcode load/update.
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Borislav Petkov <bp@alien8.de>
Link: https://lkml.kernel.org/r/20171130224640.15391.40247.stgit@tlendack-t1.amdoffice.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The latest AMD AMD64 Architecture Programmer's Manual
adds a CPUID feature XSaveErPtr (CPUID_Fn80000008_EBX[2]).
If this feature is set, the FXSAVE, XSAVE, FXSAVEOPT, XSAVEC, XSAVES
/ FXRSTOR, XRSTOR, XRSTORS always save/restore error pointers,
thus making the X86_BUG_FXSAVE_LEAK workaround obsolete on such CPUs.
Signed-off-by: Rudolf Marek <r.marek@assembler.cz>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Borislav Petkov <bp@suse.de>
Tested-by: Borislav Petkov <bp@suse.de>
Cc: Andy Lutomirski <luto@amacapital.net>
Link: https://lkml.kernel.org/r/bdcebe90-62c5-1f05-083c-eba7f08b2540@assembler.cz
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Trying to read the MAC address from an eeprom that has an offset that
is not a multiple of 4 causes an error currently.
Fix it by changing the nvmem stride to 1.
Cc: stable@vger.kernel.org
Signed-off-by: David Lechner <david@lechnology.com>
[Bartosz: tweaked the commit message]
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
In
commit 613051dac4
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date: Wed Dec 14 00:08:06 2016 +0100
drm: locking&new iterators for connector_list
we've went to extreme lengths to make sure connector iterations works
in any context, without introducing any additional locking context.
This worked, except for a small fumble in the implementation:
When we actually race with a concurrent connector unplug event, and
our temporary connector reference turns out to be the final one, then
everything breaks: We call the connector release function from
whatever context we happen to be in, which can be an irq/atomic
context. And connector freeing grabs all kinds of locks and stuff.
Fix this by creating a specially safe put function for connetor_iter,
which (in this rare case) punts the cleanup to a worker.
Reported-by: Ben Widawsky <ben@bwidawsk.net>
Cc: Ben Widawsky <ben@bwidawsk.net>
Fixes: 613051dac4 ("drm: locking&new iterators for connector_list")
Cc: Dave Airlie <airlied@gmail.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Sean Paul <seanpaul@chromium.org>
Cc: <stable@vger.kernel.org> # v4.11+
Reviewed-by: Dave Airlie <airlied@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171204204818.24745-1-daniel.vetter@ffwll.ch
Fix checkpatch.pl warnings of the form "function definition argument
'foo' should also have an identifier name".
Signed-off-by: Ashish Kalra <eashishkalra@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix checkpatch.pl warnings of the form "function definition argument
'foo' should also have an identifier name".
Signed-off-by: Ashish Kalra <eashishkalra@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
fixed CHECK: Lines should not end with a '('
reported by checkpatch.pl
Signed-off-by: Ashish Kalra <eashishkalra@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Line up arguments to opening parentheses and ensure lines stay under 80
columns, since checkpatch.pl was complaining about incorrect indentation
in function calls and definitions.
Signed-off-by: Zebulon McCorkle <zebmccorkle@zeb.fun>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
checkpatch.pl reported the bitshifts (1<<x) as a style violation, so
change them to the BIT macro (BIT(x)).
Signed-off-by: Zebulon McCorkle <zebmccorkle@zeb.fun>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch removes macros in XGI_main.h that contain a xgifb_info
variable. These macros hurt readability by hiding said variable
behind a define. It also uses a temporary variable to keep the
replaced code from getting too long.
Signed-off-by: Joshua Abraham <j.abraham1776@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Func definitions in the aead implementation were did not adhere to
coding style. Fix them for better readability.
Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The aead files was using a func naming convention which was inconsistent
(ssi vs. cc), included a useless prefix (ssi_aead) and often used
too long function names producing monster func names such as
ssi_aead_gcm_setup_ghash_desc() that made the call site code hard
to read.
Make the code more readable by switching to a simpler, consistent naming
conventionfor all the function defined in the file.
Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
backup_info field is only allocated for decrypt code path.
The field was not nullified when not used causing a kfree
in an error handling path to attempt to free random
addresses as uncovered in stress testing.
Fixes: 737aed947f ("staging: ccree: save ciphertext for CTS IV")
Cc: stable@vger.kernel.org
Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Update the ccree staging TODO list in light of recent work.
Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove braces from single statement if clause.
Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix indentation of var assignment split across lines for
better readability.
Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The removal of likely/unlikely unearthed some more
unnecessary parentheses. Remove them for better readability.
Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The ccree code made a lot of use of likely/unlikely qualifiers without
proven measurements showing any benefits. Remove them all until we
see what is justified and what is not.
Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The ccree drivers was marking a lot of big functions in C file as
static inline for no good reason. Remove the inline qualifier from
any but the few truly single line functions.
Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This was found using checkpatch.pl's EMBEDDED_FUNCTION_NAME warning.
It is easier to be consistent and always use __func__ instead of having
to remember to update any hardcoded references to the original name.
Signed-off-by: Genki Sky <sky@genki.is>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This was found using checkpatch.pl's SPLIT_STRING warning. While joining
these strings makes for long lines, the kernel codebase consistently
does it this way to make user-visible strings easier to grep for.
Signed-off-by: Genki Sky <sky@genki.is>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This was found using checkpatch.pl's MULTILINE_DEREFERENCE warning.
Putting the dereference onto one line makes them easier to read,
especially when part of a larger expression (in this case, function
arguments and ternary operator), and when the dereferences are short
(as they are here).
Signed-off-by: Genki Sky <sky@genki.is>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The fix of "FIXME: Notify the subdrivers..." doesn't actually have any
real effect. The "FIXME" changed to simple comment.
Signed-off-by: Mikhail Zaytsev <flashed@mail.ru>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
These duplicate includes have been found with scripts/checkincludes.pl but
they have been removed manually to avoid removing false positives.
Signed-off-by: Pravin Shedge <pravin.shedge4linux@gmail.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Using a period after a newline causes bad output.
Miscellanea:
o Coalesce formats too
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
All skey functions call skey_check_enable at their start, which checks
if we are in the PSTATE and injects a privileged operation exception
if we are.
Unfortunately they continue processing afterwards and perform the
operation anyhow as skey_check_enable does not deliver an error if the
exception injection was successful.
Let's move the PSTATE check into the skey functions and exit them on
such an occasion, also we now do not enable skey handling anymore in
such a case.
Signed-off-by: Janosch Frank <frankja@linux.vnet.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Fixes: a7e19ab ("KVM: s390: handle missing storage-key facility")
Cc: <stable@vger.kernel.org> # v4.8+
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Old kernels did not check for zero in the irq_state.flags field and old
QEMUs did not zero the flag/reserved fields when calling
KVM_S390_*_IRQ_STATE. Let's add comments to prevent future uses of
these fields.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Now that the SPDX tag is in all arch/s390/kvm/ files, that identifies
the license in a specific and legally-defined manner. So the extra GPL
text wording can be removed as it is no longer needed at all.
This is done on a quest to remove the 700+ different ways that files in
the kernel describe the GPL license text. And there's unneeded stuff
like the address (sometimes incorrect) for the FSF which is never
needed.
No copyright headers or other non-license-description text was removed.
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Cornelia Huck <cohuck@redhat.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Message-Id: <20171124140043.10062-9-gregkh@linuxfoundation.org>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Acked-by: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
It's good to have SPDX identifiers in all files to make it easier to
audit the kernel tree for correct licenses.
Update the arch/s390/kvm/ files with the correct SPDX license
identifier based on the license text in the file itself. The SPDX
identifier is a legally binding shorthand, which can be used instead of
the full boiler plate text.
This work is based on a script and data from Thomas Gleixner, Philippe
Ombredanne, and Kate Stewart.
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Cornelia Huck <cohuck@redhat.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Kate Stewart <kstewart@linuxfoundation.org>
Cc: Philippe Ombredanne <pombredanne@nexb.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Message-Id: <20171124140043.10062-3-gregkh@linuxfoundation.org>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
The capability check in nfnetlink_rcv() verifies that the caller
has CAP_NET_ADMIN in the namespace that "owns" the netlink socket.
However, xt_osf_fingers is shared by all net namespaces on the
system. An unprivileged user can create user and net namespaces
in which he holds CAP_NET_ADMIN to bypass the netlink_net_capable()
check:
vpnns -- nfnl_osf -f /tmp/pf.os
vpnns -- nfnl_osf -f /tmp/pf.os -d
These non-root operations successfully modify the systemwide OS
fingerprint list. Add new capable() checks so that they can't.
Signed-off-by: Kevin Cernekee <cernekee@chromium.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Change the scripting inside the shipped/extra certs C code
generation to not write the file when there are any failures.
That way, if the build aborts due to failures, we don't get
into a situation where a dummy file has been created and the
next build succeeds, but not with the desired output.
Fixes: 90a53e4432 ("cfg80211: implement regdb signature checking")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Since od/sed are in posix, hopefully there's a better chance
people will have them, over hexdump.
Fixes: 90a53e4432 ("cfg80211: implement regdb signature checking")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This is to workaround guest driver hang regression after
preemption enable that gvt hasn't enabled handling of that
for guest workload. So in effect this disables preemption
for gvt context now.
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
(cherry picked from commit 1603660b33)
We shouldn't mark inactive for vGPU context if preempted,
which would still be re-scheduled later. So keep active state.
Fixes: d6c0511300 ("drm/i915/execlists: Distinguish the incomplete context notifies")
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
(cherry picked from commit da5f99eacc)
mmio_read_from_hw() let vgpu could read hw reg, if vgpu's workload
is running on hw, things is good. Otherwise vgpu will get other
vgpu's reg val, it is unsafe.
This patch limit such hw access to active vgpu. If vgpu isn't
running on hw, the reg read of this vgpu will get the last active
val which saved at schedule_out.
v2: ring timestamp is walking continuously even if the ring is idle.
so read hw directly. (Zhenyu)
Signed-off-by: Xiong Zhang <xiong.y.zhang@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
(cherry picked from commit 295764cd2f)
Since many emulation logic needs to convert the offset of ring registers
into ring id, we export it for other caller which might need it.
Signed-off-by: Zhi Wang <zhi.a.wang@intel.com>
(cherry picked from commit 62a6a53786)
Our vGPU doesn't have a device ROM, we need follow the PCI spec to
report this info to drivers. Otherwise, we would see below errors.
Inspecting possible rom at 0xfe049000 (vd=8086:1912 bdf=00:10.0)
qemu-system-x86_64: vfio-pci: Cannot read device rom at 00000000-0000-0000-0000-000000000001
Device option ROM contents are probably invalid (check dmesg).
Skip option ROM probe with rombar=0, or load from file with romfile=No option rom signature (got 4860)
I will also send a improvement patch to PCI subsystem related to PCI ROM.
But no idea to omit below error, since no pattern to detect vbios shadow
without touch its content.
0000:00:10.0: Invalid PCI ROM header signature: expecting 0xaa55, got 0x0000
Signed-off-by: Changbin Du <changbin.du@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
(cherry picked from commit c4270d122c)
When serving multiple resize requests following could happen:
CPU0 CPU1
---- ----
kvm_vm_ioctl_resize_hpt_prepare(1);
-> schedule_work()
/* system_rq might be busy: delay */
kvm_vm_ioctl_resize_hpt_prepare(2);
mutex_lock();
if (resize) {
...
release_hpt_resize();
}
... resize_hpt_prepare_work()
-> schedule_work() {
mutex_unlock() /* resize->kvm could be wrong */
struct kvm *kvm = resize->kvm;
mutex_lock(&kvm->lock); <<<< UAF
...
}
i.e. a second resize request with different order could be started by
kvm_vm_ioctl_resize_hpt_prepare(), causing the previous request to be
free()d when there's still an active worker thread which will try to
access it. This leads to a use after free in point marked with UAF on
the diagram above.
To prevent this from happening, instead of unconditionally releasing a
pre-existing resize structure from the prepare ioctl(), we check if
the existing structure has an in-progress worker. We do that by
checking if the resize->error == -EBUSY, which is safe because the
resize->error field is protected by the kvm->lock. If there is an
active worker, instead of releasing, we mark the structure as stale by
unlinking it from kvm_struct.
In the worker thread we check for a stale structure (with kvm->lock
held), and in that case abort, releasing the stale structure ourself.
We make the check both before and the actual allocation. Strictly,
only the check afterwards is needed, the check before is an
optimization: if the structure happens to become stale before the
worker thread is dispatched, rather than during the allocation, it
means we can avoid allocating then immediately freeing a potentially
substantial amount of memory.
This fixes following or similar host kernel crash message:
[ 635.277361] Unable to handle kernel paging request for data at address 0x00000000
[ 635.277438] Faulting instruction address: 0xc00000000052f568
[ 635.277446] Oops: Kernel access of bad area, sig: 11 [#1]
[ 635.277451] SMP NR_CPUS=2048 NUMA PowerNV
[ 635.277470] Modules linked in: xt_CHECKSUM iptable_mangle ipt_MASQUERADE
nf_nat_masquerade_ipv4 iptable_nat nf_nat_ipv4 nf_nat nf_conntrack_ipv4
nf_defrag_ipv4 xt_conntrack nf_conntrack ipt_REJECT nf_reject_ipv4 tun bridge stp llc
ebtable_filter ebtables ip6table_filter ip6_tables iptable_filter nfsv3 nfs_acl nfs
lockd grace fscache kvm_hv kvm rpcrdma sunrpc ib_isert iscsi_target_mod ib_iser libiscsi
scsi_transport_iscsi ib_srpt target_core_mod ext4 ib_srp scsi_transport_srp
ib_ipoib mbcache jbd2 rdma_ucm ib_ucm ib_uverbs ib_umad rdma_cm ib_cm iw_cm ocrdma(T)
ib_core ses enclosure scsi_transport_sas sg shpchp leds_powernv ibmpowernv i2c_opal
i2c_core powernv_rng ipmi_powernv ipmi_devintf ipmi_msghandler ip_tables xfs
libcrc32c sr_mod sd_mod cdrom lpfc nvme_fc(T) nvme_fabrics nvme_core ipr nvmet_fc(T)
tg3 nvmet libata be2net crc_t10dif crct10dif_generic scsi_transport_fc ptp scsi_tgt
pps_core crct10dif_common dm_mirror dm_region_hash dm_log dm_mod
[ 635.278687] CPU: 40 PID: 749 Comm: kworker/40:1 Tainted: G
------------ T 3.10.0.bz1510771+ #1
[ 635.278782] Workqueue: events resize_hpt_prepare_work [kvm_hv]
[ 635.278851] task: c0000007e6840000 ti: c0000007e9180000 task.ti: c0000007e9180000
[ 635.278919] NIP: c00000000052f568 LR: c0000000009ea310 CTR: c0000000009ea4f0
[ 635.278988] REGS: c0000007e91837f0 TRAP: 0300 Tainted: G
------------ T (3.10.0.bz1510771+)
[ 635.279077] MSR: 9000000100009033 <SF,HV,EE,ME,IR,DR,RI,LE> CR: 24002022 XER:
00000000
[ 635.279248] CFAR: c000000000009368 DAR: 0000000000000000 DSISR: 40000000 SOFTE: 1
GPR00: c0000000009ea310 c0000007e9183a70 c000000001250b00 c0000007e9183b10
GPR04: 0000000000000000 0000000000000000 c0000007e9183650 0000000000000000
GPR08: c0000007ffff7b80 00000000ffffffff 0000000080000028 d00000000d2529a0
GPR12: 0000000000002200 c000000007b56800 c000000000120028 c0000007f135bb40
GPR16: 0000000000000000 c000000005c1e018 c000000005c1e018 0000000000000000
GPR20: 0000000000000001 c0000000011bf778 0000000000000001 fffffffffffffef7
GPR24: 0000000000000000 c000000f1e262e50 0000000000000002 c0000007e9180000
GPR28: c000000f1e262e4c c000000f1e262e50 0000000000000000 c0000007e9183b10
[ 635.280149] NIP [c00000000052f568] __list_add+0x38/0x110
[ 635.280197] LR [c0000000009ea310] __mutex_lock_slowpath+0xe0/0x2c0
[ 635.280253] Call Trace:
[ 635.280277] [c0000007e9183af0] [c0000000009ea310] __mutex_lock_slowpath+0xe0/0x2c0
[ 635.280356] [c0000007e9183b70] [c0000000009ea554] mutex_lock+0x64/0x70
[ 635.280426] [c0000007e9183ba0] [d00000000d24da04]
resize_hpt_prepare_work+0xe4/0x1c0 [kvm_hv]
[ 635.280507] [c0000007e9183c40] [c000000000113c0c] process_one_work+0x1dc/0x680
[ 635.280587] [c0000007e9183ce0] [c000000000114250] worker_thread+0x1a0/0x520
[ 635.280655] [c0000007e9183d80] [c00000000012010c] kthread+0xec/0x100
[ 635.280724] [c0000007e9183e30] [c00000000000a4b8] ret_from_kernel_thread+0x5c/0xa4
[ 635.280814] Instruction dump:
[ 635.280880] 7c0802a6 fba1ffe8 fbc1fff0 7cbd2b78 fbe1fff8 7c9e2378 7c7f1b78
f8010010
[ 635.281099] f821ff81 e8a50008 7fa52040 40de00b8 <e8be0000> 7fbd2840 40de008c
7fbff040
[ 635.281324] ---[ end trace b628b73449719b9d ]---
Cc: stable@vger.kernel.org # v4.10+
Fixes: b5baa68773 ("KVM: PPC: Book3S HV: KVM-HV HPT resizing implementation")
Signed-off-by: Serhii Popovych <spopovyc@redhat.com>
[dwg: Replaced BUG_ON()s with WARN_ONs() and reworded commit message
for clarity]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Currently the kvm_resize_hpt structure has two fields relevant to the
state of an ongoing resize: 'prepare_done', which indicates whether
the worker thread has completed or not, and 'error' which indicates
whether it was successful or not.
Since the success/failure isn't known until completion, this is
confusingly redundant. This patch consolidates the information into
just the 'error' value: -EBUSY indicates the worked is still in
progress, other negative values indicate (completed) failure, 0
indicates successful completion.
As a bonus this reduces size of struct kvm_resize_hpt by
__alignof__(struct kvm_hpt_info) and saves few bytes of code.
While there correct comment in struct kvm_resize_hpt which references
a non-existent semaphore (leftover from an early draft).
Assert with WARN_ON() in case of HPT allocation thread work runs more
than once for resize request or resize_hpt_allocate() returns -EBUSY
that is treated specially.
Change comparison against zero to make checkpatch.pl happy.
Cc: stable@vger.kernel.org # v4.10+
Signed-off-by: Serhii Popovych <spopovyc@redhat.com>
[dwg: Changed BUG_ON()s to WARN_ON()s and altered commit message for
clarity]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Things like this will probably keep showing up for other architectures
and other special cases.
I actually thought we already used %lx for this, and that is indeed
_historically_ the case, but we moved to %p when merging the 32-bit and
64-bit cases as a convenient way to get the formatting right (ie
automatically picking "%08lx" vs "%016lx" based on register size).
So just turn this %p into %px.
Reported-by: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The refcount_t protection on x86 was not intended to use the stricter
GPL export. This adjusts the linkage again to avoid a regression in
the availability of the refcount API.
Reported-by: Dave Airlie <airlied@gmail.com>
Fixes: 7a46ec0e2f ("locking/refcounts, x86/asm: Implement fast refcount overflow protection")
Cc: stable@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Julia Cartwright says:
====================
macb rx filter cleanups
Here's a proper patchset based on net-next.
v1 -> v2:
- Rebased on net-next
- Add Nicolas's Acks
- Reorder commits, putting the list_empty() cleanups prior to the
others.
- Added commit reverting the GFP_ATOMIC change.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>