Commit graph

932,869 commits

Author SHA1 Message Date
Hans de Goede
6e0c9507bf i2c: i801: Fix Failed to allocate irq -2147483648 error
On Apollo Lake devices the BIOS does not set up IRQ routing for the i801
SMBUS controller IRQ, so we end up with dev->irq set to IRQ_NOTCONNECTED.

Detect this and do not try to use the irq in this case silencing:
i801_smbus 0000:00:1f.1: Failed to allocate irq -2147483648: -107

Cc: stable@vger.kernel.org
BugLink: https://communities.intel.com/thread/114759
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-11-27 19:11:27 +01:00
Sylwester Nawrocki
fe6b204d21 ARM: dts: exynos: Add sound support for Odroid XU4
This patch adds support for Odroid XU4 audio. The main difference
comparing to Odroid XU3 is a missing on-board audio CODEC, only
HDMI output is supported on Odroid XU4. External CODEC could be
optionally connected to the I2S port connector.

Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2017-11-27 19:11:25 +01:00
Sylwester Nawrocki
78a68acf3d ARM: dts: exynos: Switch to dedicated Odroid XU3 sound card binding
The new sound card DT binding is used for Odroid XU3 in order
to properly support the HDMI audio path.  Clocks configuration is
changed so the I2S controller is now the bit clock and the frame clock
master.  The EPLL output clock is now the audio root clock adjusted to
each audio sample rate.

Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2017-11-27 18:58:05 +01:00
Wolfram Sang
4ed152c4da i2c: sh_mobile: make sure to not accidently trigger STOP
The datasheet was a bit vague, but after consultation with HW designers,
we came to the conclusion that we should set the SCP bit always when
dealing only with the ICE bit. A set SCP bit is ignored, and thus fine,
a cleared one may trigger STOP on the bus.

Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Tested-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-11-27 18:53:34 +01:00
Wolfram Sang
a4fde7e5c9 i2c: sh_mobile: send STOP according to datasheet
We initiate STOP (or REP_START) on the second last WAIT interrupt
currently. This works fine but is not according to the datasheet which
says to do it on the last WAIT interrupt. This also simplifies the code
quite a lot, so let's do it.

Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Tested-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-11-27 18:53:29 +01:00
Wolfram Sang
2967f9ca8b i2c: sh_mobile: avoid unnecessary register read
There is no data when the first WAIT interrupt arrives. No need to read
something then.

Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Tested-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-11-27 18:53:23 +01:00
Wolfram Sang
91701ae85d i2c: sh_mobile: let RuntimePM do the clock handling
No need to do it manually.

Reported-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Tested-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-11-27 18:53:18 +01:00
Wolfram Sang
a4d16493be i2c: sh_mobile: shorten exit of xfer routine
We can use the ternary operator for easier reading.

Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-11-27 18:53:12 +01:00
Wolfram Sang
832a522a3e i2c: sh_mobile: use direct writes when accessing ICE bit
ICE bit is for resetting the module. Other bits don't matter then, so we
don't need to use the iic_set_clr() function but can use iic_wr().

Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-11-27 18:53:07 +01:00
Wolfram Sang
91a5e63e3f i2c: sh_mobile: manually "inline" two short functions
Those two functions are very short and only called once. The code
becomes easier to understand if the code is directly put into the main
xfer function.

Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-11-27 18:53:02 +01:00
Wolfram Sang
3f3a513985 i2c: sh_mobile: remove redundant deinitialization
No need to clear the interrupt registers because right after that we
disable the IP core which will reload registers with their initial
values anyhow.

Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-11-27 18:52:56 +01:00
Wolfram Sang
f289800af1 i2c: sh_mobile: remove redundant initialization
Following the documentation, we initialize the HW before each START in
start_ch(). No need to do the same in activate_ch().

Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-11-27 18:52:51 +01:00
Phil Reid
e1eb7d28c0 i2c: remove legacy integer scl/sda gpio for recovery
Remove all reference to code related to using integer based ids for
scl/sda gpio for bus recovery. All in tree drivers are now using the
gpio descriptors to specific the required gpios.

Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Phil Reid <preid@electromag.com.au>
Reviewed-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-11-27 18:40:01 +01:00
Phil Reid
cd2428c368 i2c: davinci: switch to using gpiod for bus recovery gpios
Change the driver to use the gpio descriptors for the bus recovery
information instead of the deprecated integer interface.

Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Phil Reid <preid@electromag.com.au>
Reviewed-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-11-27 18:39:51 +01:00
Phil Reid
ad36a27959 i2c: imx: switch to using gpiod for bus recovery gpios
Change the driver to use the gpio descriptors for the bus recovery
information instead of the deprecated integer interface.

Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Phil Reid <preid@electromag.com.au>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-11-27 18:39:45 +01:00
Tim Sander
ca382f5b38 i2c: designware: add i2c gpio recovery option
This patch contains much input from Phil Reid and has been tested
on Intel/Altera Cyclone V SOC Hardware with Altera GPIO's for the
SCL and SDA GPIO's.

Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Tim Sander <tim@krieglstein.org>
Signed-off-by: Phil Reid <preid@electromag.com.au>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-11-27 18:39:38 +01:00
Phil Reid
0326f9f801 i2c: designware: rename i2c_dw_plat_prepare_clk to i2c_dw_prepare_clk
For consistency with the rest of the file rename function and parameter to
be consistent with the reset of the common file.

Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Phil Reid <preid@electromag.com.au>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-11-27 18:39:30 +01:00
Phil Reid
a34a0b6da2 i2c: designware: move i2c_dw_plat_prepare_clk to common
Move the i2c_dw_plat_prepare_clk funciton to common file in preparation
for its use also by the master driver.

Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Phil Reid <preid@electromag.com.au>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-11-27 18:39:22 +01:00
Phil Reid
3991c5c80b i2c: Switch to using gpiod interface for gpio bus recovery
Currently the i2c gpio recovery code uses gpio integer interface
instead of the gpiod. This change switch the core code to use
the gpiod while still retaining compatibility with the gpio integer
interface. This will allow individual driver to be updated and tested
individual to switch to using the gpiod interface.

Reviewed-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Phil Reid <preid@electromag.com.au>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-11-27 18:39:13 +01:00
Darrick J. Wong
509955823c xfs: log recovery should replay deferred ops in order
As part of testing log recovery with dm_log_writes, Amir Goldstein
discovered an error in the deferred ops recovery that lead to corruption
of the filesystem metadata if a reflink+rmap filesystem happened to shut
down midway through a CoW remap:

"This is what happens [after failed log recovery]:

"Phase 1 - find and verify superblock...
"Phase 2 - using internal log
"        - zero log...
"        - scan filesystem freespace and inode maps...
"        - found root inode chunk
"Phase 3 - for each AG...
"        - scan (but don't clear) agi unlinked lists...
"        - process known inodes and perform inode discovery...
"        - agno = 0
"data fork in regular inode 134 claims CoW block 376
"correcting nextents for inode 134
"bad data fork in inode 134
"would have cleared inode 134"

Hou Tao dissected the log contents of exactly such a crash:

"According to the implementation of xfs_defer_finish(), these ops should
be completed in the following sequence:

"Have been done:
"(1) CUI: Oper (160)
"(2) BUI: Oper (161)
"(3) CUD: Oper (194), for CUI Oper (160)
"(4) RUI A: Oper (197), free rmap [0x155, 2, -9]

"Should be done:
"(5) BUD: for BUI Oper (161)
"(6) RUI B: add rmap [0x155, 2, 137]
"(7) RUD: for RUI A
"(8) RUD: for RUI B

"Actually be done by xlog_recover_process_intents()
"(5) BUD: for BUI Oper (161)
"(6) RUI B: add rmap [0x155, 2, 137]
"(7) RUD: for RUI B
"(8) RUD: for RUI A

"So the rmap entry [0x155, 2, -9] for COW should be freed firstly,
then a new rmap entry [0x155, 2, 137] will be added. However, as we can see
from the log record in post_mount.log (generated after umount) and the trace
print, the new rmap entry [0x155, 2, 137] are added firstly, then the rmap
entry [0x155, 2, -9] are freed."

When reconstructing the internal log state from the log items found on
disk, it's required that deferred ops replay in exactly the same order
that they would have had the filesystem not gone down.  However,
replaying unfinished deferred ops can create /more/ deferred ops.  These
new deferred ops are finished in the wrong order.  This causes fs
corruption and replay crashes, so let's create a single defer_ops to
handle the subsequent ops created during replay, then use one single
transaction at the end of log recovery to ensure that everything is
replayed in the same order as they're supposed to be.

Reported-by: Amir Goldstein <amir73il@gmail.com>
Analyzed-by: Hou Tao <houtao1@huawei.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Tested-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2017-11-27 09:34:08 -08:00
Darrick J. Wong
98c4f78dcd xfs: always free inline data before resetting inode fork during ifree
In xfs_ifree, we reset the data/attr forks to extents format without
bothering to free any inline data buffer that might still be around
after all the blocks have been truncated off the file.  Prior to commit
43518812d2 ("xfs: remove support for inlining data/extents into the
inode fork") nobody noticed because the leftover inline data after
truncation was small enough to fit inside the inline buffer inside the
fork itself.

However, now that we've removed the inline buffer, we /always/ have to
free the inline data buffer or else we leak them like crazy.  This test
was found by turning on kmemleak for generic/001 or generic/388.

Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
2017-11-27 09:33:25 -08:00
Stefan Lengfeld
901a891fa6 i2c: use macro IS_ENABLED in header i2c.h
Using the macro IS_ENABLED to check the option CONFIG_I2C=(y|m) makes
the code nicer.  No functional change.

Signed-off-by: Stefan Lengfeld <contact@stefanchrist.eu>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-11-27 18:31:57 +01:00
Jarkko Nikula
43df43e6ba i2c: designware: Don't set SCL timings and speed mode when in slave mode
According to data sheet SCL timing parameters and DW_IC_CON SPEED mode
bits are not used when operating in slave mode.

Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Tested-by: Luis Oliveira <lolivei@synopsys.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-11-27 18:30:13 +01:00
Adam Thomson
b7926c464d
ASoC: da7218: Correct IRQ level in DT binding example
Current DT binding documentation shows an example where the IRQ
for the device is chosen to be ACTIVE_HIGH. This is incorrect as
the device only supports ACTIVE_LOW, so this commit fixes that
discrepancy.

Signed-off-by: Adam Thomson <Adam.Thomson.Opensource@diasemi.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
2017-11-27 17:11:10 +00:00
Adam Thomson
d3b0535216
ASoC: da7219: Correct IRQ level in DT binding example
Current DT binding documentation shows an example where the IRQ
for the device is chosen to be ACTIVE_HIGH. This is incorrect as
the device only supports ACTIVE_LOW, so this commit fixes that
discrepancy.

Signed-off-by: Adam Thomson <Adam.Thomson.Opensource@diasemi.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
2017-11-27 17:10:48 +00:00
Tal Shorer
c98a980509 workqueue: respect isolated cpus when queueing an unbound work
Initialize wq_unbound_cpumask to exclude cpus that were isolated by
the cmdline's isolcpus parameter.

Signed-off-by: Tal Shorer <tal.shorer@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2017-11-27 08:57:00 -08:00
Tal Shorer
7d229c668a main: kernel_start: move housekeeping_init() before workqueue_init_early()
This is needed in order to allow the unbound workqueue to take
housekeeping cpus into accounty

Signed-off-by: Tal Shorer <tal.shorer@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2017-11-27 08:56:57 -08:00
Andreas Gruenbacher
9aa0159327 gfs2: Remove unused gfs2_write_jdata_pagevec parameter
As a follow-up to commit d2bc5b3c67, remove the end parameter which is
now unused.

Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
2017-11-27 10:54:55 -06:00
Paolo Bonzini
a63dd7480d PPC KVM fixes for 4.15
One commit here, that fixes a couple of bugs relating to the patch
 series that enables HPT guests to run on a radix host on POWER9
 systems.  This patch series went upstream in the 4.15 merge window,
 so no stable backport is required.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJaGKSnAAoJEJ2a6ncsY3GfF7MIANLLhznEMrWq8jw4g95WsJU1
 MkDGwp8kIdhIOM9HD6JRskoJZB5Mws2BWlQ5PSaVFxO6v6eUgNLaRb/UBxC1r7gU
 1f9/8corY4BNkezSdJqTL7Xgp13KjTU726OwYAqCPEyCSPEc9ciMyeIgyZuv2dPa
 Pju+u4tnA+9JJyskgNL+/ybOOZwVat91VmNUVRq29zP6+zo1tmIDxrQchy6Bqui/
 7Wg298G+yjAkJ8ktQu69ACk+0oEBGUOcLUlraqGSr9auR+b0nJ1PAGCDRaONdwgE
 +X+OE+t+UC6rU+coUXMwO+Id0X7HMdsLQd3066ODEtD55g8MIVZ126Wt8xDmj5o=
 =GSTh
 -----END PGP SIGNATURE-----

Merge tag 'kvm-ppc-fixes-4.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc into kvm-master

PPC KVM fixes for 4.15

One commit here, that fixes a couple of bugs relating to the patch
series that enables HPT guests to run on a radix host on POWER9
systems.  This patch series went upstream in the 4.15 merge window,
so no stable backport is required.
2017-11-27 17:54:13 +01:00
Jan H. Schönherr
20b7035c66 KVM: Let KVM_SET_SIGNAL_MASK work as advertised
KVM API says for the signal mask you set via KVM_SET_SIGNAL_MASK, that
"any unblocked signal received [...] will cause KVM_RUN to return with
-EINTR" and that "the signal will only be delivered if not blocked by
the original signal mask".

This, however, is only true, when the calling task has a signal handler
registered for a signal. If not, signal evaluation is short-circuited for
SIG_IGN and SIG_DFL, and the signal is either ignored without KVM_RUN
returning or the whole process is terminated.

Make KVM_SET_SIGNAL_MASK behave as advertised by utilizing logic similar
to that in do_sigtimedwait() to avoid short-circuiting of signals.

Signed-off-by: Jan H. Schönherr <jschoenh@amazon.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-11-27 17:53:47 +01:00
Prateek Sood
1599a185f0 cpuset: Make cpuset hotplug synchronous
Convert cpuset_hotplug_workfn() into synchronous call for cpu hotplug
path. For memory hotplug path it still gets queued as a work item.

Since cpuset_hotplug_workfn() can be made synchronous for cpu hotplug
path, it is not required to wait for cpuset hotplug while thawing
processes.

Signed-off-by: Prateek Sood <prsood@codeaurora.org>
Signed-off-by: Tejun Heo <tj@kernel.org>
2017-11-27 08:48:10 -08:00
Prateek Sood
aa24163b2e cgroup/cpuset: remove circular dependency deadlock
Remove circular dependency deadlock in a scenario where hotplug of CPU is
being done while there is updation in cgroup and cpuset triggered from
userspace.

Process A => kthreadd => Process B => Process C => Process A

Process A
cpu_subsys_offline();
  cpu_down();
    _cpu_down();
      percpu_down_write(&cpu_hotplug_lock); //held
      cpuhp_invoke_callback();
	     workqueue_offline_cpu();
            queue_work_on(); // unbind_work on system_highpri_wq
               __queue_work();
                 insert_work();
                    wake_up_worker();
            flush_work();
               wait_for_completion();

worker_thread();
   manage_workers();
      create_worker();
	     kthread_create_on_node();
		    wake_up_process(kthreadd_task);

kthreadd
kthreadd();
  kernel_thread();
    do_fork();
      copy_process();
        percpu_down_read(&cgroup_threadgroup_rwsem);
          __rwsem_down_read_failed_common(); //waiting

Process B
kernfs_fop_write();
  cgroup_file_write();
    cgroup_procs_write();
      percpu_down_write(&cgroup_threadgroup_rwsem); //held
      cgroup_attach_task();
        cgroup_migrate();
          cgroup_migrate_execute();
            cpuset_can_attach();
              mutex_lock(&cpuset_mutex); //waiting

Process C
kernfs_fop_write();
  cgroup_file_write();
    cpuset_write_resmask();
      mutex_lock(&cpuset_mutex); //held
      update_cpumask();
        update_cpumasks_hier();
          rebuild_sched_domains_locked();
            get_online_cpus();
              percpu_down_read(&cpu_hotplug_lock); //waiting

Eliminating deadlock by reversing the locking order for cpuset_mutex and
cpu_hotplug_lock.

Signed-off-by: Prateek Sood <prsood@codeaurora.org>
Signed-off-by: Tejun Heo <tj@kernel.org>
2017-11-27 08:48:10 -08:00
Tetsuo Handa
8b0d7f56b9 gfs2: Fix wrong error handling in init_gfs2_fs()
init_gfs2_fs() is calling e.g. calling unregister_shrinker() without
register_shrinker() when an error occurred during initialization.
Rename goto labels and call appropriate undo function.

Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
2017-11-27 10:47:22 -06:00
Bob Peterson
a18c78c5f5 GFS2: Combine gfs2_free_di with gfs2_free_uninit_di
Before this patch, function gfs2_free_di was 4 lines of code, and
one of those lines was to call gfs2_free_uninit_di. Although
unlikely, if function gfs2_free_uninit_di encountered an error
finding the block to be freed, the error was silently ignored by the
caller, which went ahead and improperly did a quota-change operation
and meta_wipe despite the error. This patch combines the two
functions into one to make the code more readable and fixes the bug
by returning from the combined function before it takes those next
incorrect steps.

Signed-off-by: Bob Peterson <rpeterso@redhat.com>
2017-11-27 10:47:14 -06:00
Maciej S. Szmigiero
74231295c6
ASoC: fsl_ssi: remove duplicated flag setting in fsl_ssi_setup_reg_vals()
We don't need to set CCSR_SSI_SIER_RFF0_EN / CCSR_SSI_SIER_TFE0_EN bits
in reg->rx.sier / reg->tx.sier variables in a non-AC'97 mode considering we
had just initialized these variables to these very values unconditionally a
few lines earlier.

Signed-off-by: Maciej S. Szmigiero <mail@maciej.szmigiero.name>
Acked-by: Nicolin Chen <nicoleotsuka@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2017-11-27 16:45:13 +00:00
oder_chiou@realtek.com
346cccf883
ASoC: rt5514: Add the sanity check for the driver_data in the resume function
If the rt5514 spi driver is loaded, but the snd_soc_platform_driver is not
loaded by the correct DAI settings, the NULL pointer will be gotten by
snd_soc_platform_get_drvdata in the resume function.

Signed-off-by: Oder Chiou <oder_chiou@realtek.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2017-11-27 16:44:57 +00:00
Jesse Chan
0cab20cec0
ASoC: pcm512x: add missing MODULE_DESCRIPTION/AUTHOR/LICENSE
This change resolves a new compile-time warning
when built as a loadable module:

WARNING: modpost: missing MODULE_LICENSE() in sound/soc/codecs/snd-soc-pcm512x-spi.o
see include/linux/module.h for more information

This adds the license as "GPL v2", which matches the header of the file.

MODULE_DESCRIPTION and MODULE_AUTHOR are also added.

Signed-off-by: Jesse Chan <jc@linux.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2017-11-27 16:44:41 +00:00
Maciej S. Szmigiero
b880b8056b
ASoC: fsl_ssi: serialize AC'97 register access operations
AC'97 register access operations (both read and write) on SSI use a one,
shared set of SSI registers for AC'97 register address and data.
This means that only one such access is possible at a time and so all these
operations need to be serialized.

Since an AC'97 register access operation in this driver takes 100us+ let's
use a mutex for this.

Use this opportunity to also change a default value returned from AC'97
register read function from -1 to 0, since that's what AC'97 specs require
to be returned when unknown / undefined registers are read.

Signed-off-by: Maciej S. Szmigiero <mail@maciej.szmigiero.name>
Signed-off-by: Mark Brown <broonie@kernel.org>
2017-11-27 16:43:43 +00:00
Paul E. McKenney
844ccdd7dc rcu: Eliminate rcu_irq_enter_disabled()
Now that the irq path uses the rcu_nmi_{enter,exit}() algorithm,
rcu_irq_enter() and rcu_irq_exit() may be used from any context.  There is
thus no need for rcu_irq_enter_disabled() and for the checks using it.
This commit therefore eliminates rcu_irq_enter_disabled().

Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2017-11-27 08:42:03 -08:00
Paul E. McKenney
51a1fd30f1 rcu: Make ->dynticks_nesting be a simple counter
Now that ->dynticks_nesting counts only process-level dyntick-idle
entry and exit, there is no need for the elaborate segmented counter
with its guard fields and overflow checking.  This commit therefore
makes ->dynticks_nesting be a simple counter.

Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2017-11-27 08:42:03 -08:00
Paul E. McKenney
58721f5da4 rcu: Define rcu_irq_{enter,exit}() in terms of rcu_nmi_{enter,exit}()
RCU currently uses two different mechanisms for tracking irqs and NMIs.
This is unnecessary complexity: Given that NMIs can nest and given that
RCU's tracking handles such nesting, the NMI tracking mechanism can also
be used to track irqs.  This commit therefore defines rcu_irq_enter()
in terms of rcu_nmi_enter() and rcu_irq_exit() in terms of rcu_nmi_exit().

Unfortunately, callers must still distinguish between the irq and NMI
functions because additional actions are taken when an irq interrupts
idle or nohz_full usermode execution, and these actions cannot always
be taken from NMI handlers.

Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2017-11-27 08:42:03 -08:00
Maciej S. Szmigiero
695b78b548
ASoC: fsl_ssi: AC'97 ops need regmap, clock and cleaning up on failure
AC'97 ops (register read / write) need SSI regmap and clock, so they have
to be set after them.

We also need to set these ops back to NULL if we fail the probe.

Signed-off-by: Maciej S. Szmigiero <mail@maciej.szmigiero.name>
Acked-by: Nicolin Chen <nicoleotsuka@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org
2017-11-27 16:41:55 +00:00
Liu Bo
ebb70442cd Btrfs: fix list_add corruption and soft lockups in fsync
Xfstests btrfs/146 revealed this corruption,

[   58.138831] Buffer I/O error on dev dm-0, logical block 2621424, async page read
[   58.151233] BTRFS error (device sdf): bdev /dev/mapper/error-test errs: wr 1, rd 0, flush 0, corrupt 0, gen 0
[   58.152403] list_add corruption. prev->next should be next (ffff88005e6775d8), but was ffffc9000189be88. (prev=ffffc9000189be88).
[   58.153518] ------------[ cut here ]------------
[   58.153892] WARNING: CPU: 1 PID: 1287 at lib/list_debug.c:31 __list_add_valid+0x169/0x1f0
...
[   58.157379] RIP: 0010:__list_add_valid+0x169/0x1f0
...
[   58.161956] Call Trace:
[   58.162264]  btrfs_log_inode_parent+0x5bd/0xfb0 [btrfs]
[   58.163583]  btrfs_log_dentry_safe+0x60/0x80 [btrfs]
[   58.164003]  btrfs_sync_file+0x4c2/0x6f0 [btrfs]
[   58.164393]  vfs_fsync_range+0x5f/0xd0
[   58.164898]  do_fsync+0x5a/0x90
[   58.165170]  SyS_fsync+0x10/0x20
[   58.165395]  entry_SYSCALL_64_fastpath+0x1f/0xbe
...

It turns out that we could record btrfs_log_ctx:io_err in
log_one_extents when IO fails, but make log_one_extents() return '0'
instead of -EIO, so the IO error is not acknowledged by the callers,
i.e.  btrfs_log_inode_parent(), which would remove btrfs_log_ctx:list
from list head 'root->log_ctxs'.  Since btrfs_log_ctx is allocated
from stack memory, it'd get freed with a object alive on the
list. then a future list_add will throw the above warning.

This returns the correct error in the above case.

Jeff also reported this while testing against his fsync error
patch set[1].

[1]: https://www.spinics.net/lists/linux-btrfs/msg65308.html
"btrfs list corruption and soft lockups while testing writeback error handling"

Fixes: 8407f55326 ("Btrfs: fix data corruption after fast fsync and writeback error")
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2017-11-27 17:41:19 +01:00
Paul E. McKenney
6136d6e48a rcu: Clamp ->dynticks_nmi_nesting at eqs entry/exit
In preparation for merging dyntick-idle irq handling into the NMI
algorithm, clamp ->dynticks_nmi_nesting value to allow for interrupts
that enter but never leave and vice versa.

It is important that the clamping happen outside of the extended quiescent
state.  Otherwise, there will be short windows where irqs and NMIs fail
to convince RCU to start watching.

Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2017-11-27 08:40:10 -08:00
Paul E. McKenney
fd581a91ac rcu: Move rcu_nmi_{enter,exit}() to prepare for consolidation
This is a code-motion-only commit that prepares to define rcu_irq_enter()
in terms of rcu_nmi_enter() and rcu_irq_exit() in terms of rcu_irq_exit().

Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2017-11-27 08:40:10 -08:00
Paul E. McKenney
a0eb22bf64 rcu: Reduce dyntick-idle state space
Both extended-quiescent-state entry and exit first update the nesting
counter and then adjust the dyntick-idle state.  This means that there
are four states: (1) Both nesting and dyntick idle indicate idle,
(2) Nesting indicates idle but dyntick idle does not, (3) Nesting indicates
non-idle and dyntick idle does not, and (4) Both nesting and dyntick
idle indicate non-idle.  This commit simplifies the state space by
eliminating #3, reversing the order of updates on exit from extended
quiescent state.

Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2017-11-27 08:40:10 -08:00
Paul E. McKenney
2e672ab2d4 rcu: Avoid ->dynticks_nmi_nesting store tearing
NMIs can nest, and store tearing could in theory happen on carries
from one byte to the next.  This commit therefore adds the WRITE_ONCE()
macros preventing this.

Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2017-11-27 08:40:09 -08:00
Wanpeng Li
b74558259c KVM: VMX: Fix vmx->nested freeing when no SMI handler
Reported by syzkaller:

   ------------[ cut here ]------------
   WARNING: CPU: 5 PID: 2939 at arch/x86/kvm/vmx.c:3844 free_loaded_vmcs+0x77/0x80 [kvm_intel]
   CPU: 5 PID: 2939 Comm: repro Not tainted 4.14.0+ #26
   RIP: 0010:free_loaded_vmcs+0x77/0x80 [kvm_intel]
   Call Trace:
    vmx_free_vcpu+0xda/0x130 [kvm_intel]
    kvm_arch_destroy_vm+0x192/0x290 [kvm]
    kvm_put_kvm+0x262/0x560 [kvm]
    kvm_vm_release+0x2c/0x30 [kvm]
    __fput+0x190/0x370
    task_work_run+0xa1/0xd0
    do_exit+0x4d2/0x13e0
    do_group_exit+0x89/0x140
    get_signal+0x318/0xb80
    do_signal+0x8c/0xb40
    exit_to_usermode_loop+0xe4/0x140
    syscall_return_slowpath+0x206/0x230
    entry_SYSCALL_64_fastpath+0x98/0x9a

The syzkaller testcase will execute VMXON/VMLAUCH instructions, so the
vmx->nested stuff is populated, it will also issue KVM_SMI ioctl. However,
the testcase is just a simple c program and not be lauched by something
like seabios which implements smi_handler. Commit 05cade71cf (KVM: nSVM:
fix SMI injection in guest mode) gets out of guest mode and set nested.vmxon
to false for the duration of SMM according to SDM 34.14.1 "leave VMX
operation" upon entering SMM. We can't alloc/free the vmx->nested stuff
each time when entering/exiting SMM since it will induce more overhead. So
the function vmx_pre_enter_smm() marks nested.vmxon false even if vmx->nested
stuff is still populated. What it expected is em_rsm() can mark nested.vmxon
to be true again. However, the smi_handler/rsm will not execute since there
is no something like seabios in this scenario. The function free_nested()
fails to free the vmx->nested stuff since the vmx->nested.vmxon is false
which results in the above warning.

This patch fixes it by also considering the no SMI handler case, luckily
vmx->nested.smm.vmxon is marked according to the value of vmx->nested.vmxon
in vmx_pre_enter_smm(), we can take advantage of it and free vmx->nested
stuff when L1 goes down.

Reported-by: Dmitry Vyukov <dvyukov@google.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Reviewed-by: Liran Alon <liran.alon@oracle.com>
Fixes: 05cade71cf (KVM: nSVM: fix SMI injection in guest mode)
Signed-off-by: Wanpeng Li <wanpeng.li@hotmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-11-27 17:37:55 +01:00
Wanpeng Li
c37c28730b KVM: VMX: Fix rflags cache during vCPU reset
Reported by syzkaller:

   *** Guest State ***
   CR0: actual=0x0000000080010031, shadow=0x0000000060000010, gh_mask=fffffffffffffff7
   CR4: actual=0x0000000000002061, shadow=0x0000000000000000, gh_mask=ffffffffffffe8f1
   CR3 = 0x000000002081e000
   RSP = 0x000000000000fffa  RIP = 0x0000000000000000
   RFLAGS=0x00023000         DR7 = 0x00000000000000
          ^^^^^^^^^^
   ------------[ cut here ]------------
   WARNING: CPU: 6 PID: 24431 at /home/kernel/linux/arch/x86/kvm//x86.c:7302 kvm_arch_vcpu_ioctl_run+0x651/0x2ea0 [kvm]
   CPU: 6 PID: 24431 Comm: reprotest Tainted: G        W  OE   4.14.0+ #26
   RIP: 0010:kvm_arch_vcpu_ioctl_run+0x651/0x2ea0 [kvm]
   RSP: 0018:ffff880291d179e0 EFLAGS: 00010202
   Call Trace:
    kvm_vcpu_ioctl+0x479/0x880 [kvm]
    do_vfs_ioctl+0x142/0x9a0
    SyS_ioctl+0x74/0x80
    entry_SYSCALL_64_fastpath+0x23/0x9a

The failed vmentry is triggered by the following beautified testcase:

    #include <unistd.h>
    #include <sys/syscall.h>
    #include <string.h>
    #include <stdint.h>
    #include <linux/kvm.h>
    #include <fcntl.h>
    #include <sys/ioctl.h>

    long r[5];
    int main()
    {
        struct kvm_debugregs dr = { 0 };

        r[2] = open("/dev/kvm", O_RDONLY);
        r[3] = ioctl(r[2], KVM_CREATE_VM, 0);
        r[4] = ioctl(r[3], KVM_CREATE_VCPU, 7);
        struct kvm_guest_debug debug = {
                .control = 0xf0403,
                .arch = {
                        .debugreg[6] = 0x2,
                        .debugreg[7] = 0x2
                }
        };
        ioctl(r[4], KVM_SET_GUEST_DEBUG, &debug);
        ioctl(r[4], KVM_RUN, 0);
    }

which testcase tries to setup the processor specific debug
registers and configure vCPU for handling guest debug events through
KVM_SET_GUEST_DEBUG.  The KVM_SET_GUEST_DEBUG ioctl will get and set
rflags in order to set TF bit if single step is needed. All regs' caches
are reset to avail and GUEST_RFLAGS vmcs field is reset to 0x2 during vCPU
reset. However, the cache of rflags is not reset during vCPU reset. The
function vmx_get_rflags() returns an unreset rflags cache value since
the cache is marked avail, it is 0 after boot. Vmentry fails if the
rflags reserved bit 1 is 0.

This patch fixes it by resetting both the GUEST_RFLAGS vmcs field and
its cache to 0x2 during vCPU reset.

Reported-by: Dmitry Vyukov <dvyukov@google.com>
Tested-by: Dmitry Vyukov <dvyukov@google.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Cc: Nadav Amit <nadav.amit@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Wanpeng Li <wanpeng.li@hotmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-11-27 17:37:46 +01:00
Chris Wilson
d02a1d8308 drm/i915: Rename i915_gem_timelines_mark_idle
The kerneldoc markup for i915_gem_timelines_mark_idle() was incorrect,
so take the opportunity to also convert it from the "mark_idle" to "park"
naming scheme.

drivers/gpu/drm/i915/i915_gem_timeline.c:120: warning: No description found for parameter 'i915'

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171127123054.20966-1-chris@chris-wilson.co.uk
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
2017-11-27 16:37:15 +00:00