Commit graph

932,869 commits

Author SHA1 Message Date
Chris Wilson
f4e15af7e2 drm/i915: Mark the context state as dirty/written
In the next few patches, we will want to both copy out of the context
image and write a valid image into a new context. To be completely safe,
we should then couple in our domain tracking to ensure that we don't
have any issues with stale data remaining in unwanted cachelines.

Historically, we omitted the .write=true from the call to set-gtt-domain
in i915_switch_context() in order to avoid a stall between every request
as we would want to wait for the previous context write from the gpu.
Since then, we limit the set-gtt-domain to only occur when we first bind
the vma, so once in use we will never stall, and we are sure to flush
the context following a load from swap.

Equally we never applied the lessons learnt from ringbuffer submission
to execlists; so time to apply the flush of the lrc after load as well.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Acked-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171110142634.10551-6-chris@chris-wilson.co.uk
2017-11-10 17:20:29 +00:00
Chris Wilson
d378a3efb8 drm/i915: Inline intel_modeset_gem_init()
intel_modeset_gem_init() now only sets up the legacy overlay, so let's
remove the function and call the setup directly during driver load. This
should help us find a better point in the initialisation sequence for it
later.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171110142634.10551-5-chris@chris-wilson.co.uk
2017-11-10 17:20:28 +00:00
Chris Wilson
cc6a818ad6 drm/i915: Move intel_init_clock_gating() to i915_gem_init()
Despite its name intel_init_clock_gating applies both display clock gating
workarounds; GT mmio workarounds and the occasional GT power context
workaround. Worse, sometimes it includes a context register workaround
which we need to apply before we record the default HW state for all
contexts.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171110142634.10551-4-chris@chris-wilson.co.uk
2017-11-10 17:20:27 +00:00
Chris Wilson
f58d13d571 drm/i915: Move GT powersaving init to i915_gem_init()
GT powersaving is tightly coupled to the request infrastructure. To
avoid complications with the order of initialisation in the next patch
(where we want to send requests to hw during GEM init) move the
powersaving initialisation into the purview of i915_gem_init().

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171110142634.10551-3-chris@chris-wilson.co.uk
2017-11-10 17:20:26 +00:00
Chris Wilson
ae6c457478 drm/i915: Force the switch to the i915->kernel_context
In the next few patches, we will have a hard requirement that we emit a
context-switch to the perma-pinned i915->kernel_context (so that we can
save the HW state using that context-switch). As the first context
itself may be classed as a kernel context, we want to be explicit in our
comparison. For an extra-layer of finesse, we can check the last
unretired context on the engine; as well as the last retired context
when idle.

v2: verbose verbosity
v3: Always force the switch, even when the engine is idle, and update
the assert that this happens before suspend.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> #v1
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171110142634.10551-2-chris@chris-wilson.co.uk
2017-11-10 17:20:25 +00:00
Tvrtko Ursulin
1803fcbca2 drm/i915: Define an engine class enum for the uABI
We want to be able to report back to userspace details about an engine's
class, and in return for userspace to be able to request actions
regarding certain classes of engines. To isolate the uABI from any
variations between hw generations, we define an abstract class for the
engines and internally map onto the hw.

v2: Remove MAX from the uABI; keep it internal if we need it, but don't
let userspace make the mistake of using it themselves.
v3: s/OTHER/INVALID/
  The use of OTHER is ill-defined, so remove it from the uABI as any
  future new type of engine can define a class to suit it. But keep a
  reserved value for an invalid class, so that we can always
  unambiguously express when something doesn't belong to the
  classification.

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> #v2
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171110142634.10551-1-chris@chris-wilson.co.uk
2017-11-10 17:20:24 +00:00
oulijun
d551424617 RDMA/hns: Update calculation of irrl_ba field for hip08
The irrl(initiator RDMA Read/Atomic list) base address of qp
context is assigned for addr[63:6]. This patch mainly fixed
it.

Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Signed-off-by: Shaobo Xu <xushaobo2@huawei.com>
Signed-off-by: Yixian Liu <liuyixian@huawei.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-11-10 12:15:11 -05:00
Wei Hu(Xavier)
b5ff0f610b RDMA/hns: Configure sgid type for hip08 RoCE
The hardware vendors need to generate RoCEv1 or RoCEv2
packet according to the sgid type configured.

Besides, update the gid table size for hip08 RoCE
device.

Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Signed-off-by: Shaobo Xu <xushaobo2@huawei.com>
Signed-off-by: Yixian Liu <liuyixian@huawei.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-11-10 12:14:27 -05:00
Wei Hu(Xavier)
023c1477b0 RDMA/hns: Generate gid type of RoCEv2
HNS_ROCE_CAP_FALG_ROCE_V1_V2 is added for selecting capability of
RoCE in hns driver. When HNS_ROCE_CAP_FALG_ROCE_V1_V2 is set,
driver will inform ib core that the related hns device can support
RoCEv2, and ib core can generate the gid of the related type.

Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Signed-off-by: Shaobo Xu <xushaobo2@huawei.com>
Signed-off-by: Yixian Liu <liuyixian@huawei.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-11-10 12:14:27 -05:00
Wei Hu(Xavier)
a2c80b7b41 RDMA/hns: Add rereg mr support for hip08
This patch adds rereg mr support for hip08.

Signed-off-by: Shaobo Xu <xushaobo2@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Yixian Liu <liuyixian@huawei.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-11-10 12:14:27 -05:00
Tony Lindgren
60636a5d0f ARM: dts: Add remote-wakeup-connected for omap OHCI
Add remote-wakeup-connected for omap OHCI as that's needed by
ohci-platform driver.

Cc: devicetree@vger.kernel.org
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Rob Herring <robh@kernel.org>
Cc: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Cc: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Acked-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2017-11-10 09:00:16 -08:00
Chris Wilson
9511ce1ce7 drm/i915/selftests: Initialise mock_i915->mm.obj_lock
lockdep spotted that the mock tests were using the i915->mm.obj_lock
without first initialiasing it:

>[ 1303.217043] [IGT] drv_selftest: starting subtest mock_objects
<4>[ 1303.240898] Setting dangerous option mock_selftests - tainting kernel
<6>[ 1303.253665] i915: Performing mock selftests with st_random_seed=0xd87ea6c6 st_timeout=1000
<4>[ 1303.254812] INFO: trying to register non-static key.
<4>[ 1303.254816] the code is fine but needs lockdep annotation.
<4>[ 1303.254818] turning off the locking correctness validator.
<4>[ 1303.254820] CPU: 4 PID: 13112 Comm: drv_selftest Tainted: G     U  W       4.14.0-rc8-CI-Patchwork_7058+ #1
<4>[ 1303.254823] Hardware name: MSI MS-7924/Z97M-G43(MS-7924), BIOS V1.12 02/15/2016
<4>[ 1303.254825] Call Trace:
<4>[ 1303.254829]  dump_stack+0x68/0x9f
<4>[ 1303.254832]  register_lock_class+0x3fd/0x580
<4>[ 1303.254835]  ? ___slab_alloc.constprop.29+0x157/0x3d0
<4>[ 1303.254837]  ? ___slab_alloc.constprop.29+0x157/0x3d0
<4>[ 1303.254840]  ? sg_kmalloc+0x1e/0x50
<4>[ 1303.254842]  ? debug_smp_processor_id+0x17/0x20
<4>[ 1303.254845]  __lock_acquire+0xa4/0x1b00
<4>[ 1303.254884]  ? __i915_gem_object_set_pages+0x116/0x1f0 [i915]
<4>[ 1303.254887]  ? __this_cpu_preempt_check+0x13/0x20
<4>[ 1303.254889]  ? sg_kmalloc+0x1e/0x50
<4>[ 1303.254891]  lock_acquire+0xb0/0x200
<4>[ 1303.254893]  ? lock_acquire+0xb0/0x200
<4>[ 1303.254917]  ? __i915_gem_object_set_pages+0x116/0x1f0 [i915]
<4>[ 1303.254920]  _raw_spin_lock+0x32/0x50
<4>[ 1303.254944]  ? __i915_gem_object_set_pages+0x116/0x1f0 [i915]
<4>[ 1303.254967]  __i915_gem_object_set_pages+0x116/0x1f0 [i915]
<4>[ 1303.254991]  i915_gem_object_get_pages_phys+0x286/0x2b0 [i915]
<4>[ 1303.255015]  ____i915_gem_object_get_pages+0x20/0x60 [i915]
<4>[ 1303.255039]  i915_gem_object_attach_phys+0x137/0x1a0 [i915]
<4>[ 1303.255063]  igt_phys_object+0x45/0x120 [i915]
<4>[ 1303.255094]  __i915_subtests+0x40/0xd0 [i915]
<4>[ 1303.255099]  ? work_on_cpu_safe+0x60/0x60
<4>[ 1303.255131]  i915_gem_object_mock_selftests+0x34/0x50 [i915]

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.william.auld@gmail.com>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171110151919.18451-1-chris@chris-wilson.co.uk
Reviewed-by: Matthew Auld <matthew.william.auld@gmail.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
2017-11-10 16:21:17 +00:00
Rob Herring
f0e11ff8ff ARM: dts: am33xx: Add missing #phy-cells to ti,am335x-usb-phy
"ti,am335x-usb-phy" is using the phy binding, but is missing #phy-cells
property. Fixes the following warning in TI dts files:

Warning (phys_property): Missing property '#phy-cells' in node ...

Signed-off-by: Rob Herring <robh@kernel.org>
Cc: "Benoît Cousson" <bcousson@baylibre.com>
Cc: Tony Lindgren <tony@atomide.com>
Cc: linux-omap@vger.kernel.org
Signed-off-by: Tony Lindgren <tony@atomide.com>
2017-11-10 08:16:26 -08:00
Rob Herring
f568f6f554 ARM: dts: omap: Add missing #phy-cells to usb-nop-xceiv
"usb-nop-xceiv" is using the phy binding, but is missing #phy-cells
property. This is probably because the binding was the precursor to the phy
binding.

Fixes the following warning in OMAP dts files:

Warning (phys_property): Missing property '#phy-cells' in node ...

Signed-off-by: Rob Herring <robh@kernel.org>
Cc: "Benoît Cousson" <bcousson@baylibre.com>
Cc: Tony Lindgren <tony@atomide.com>
Cc: Enric Balletbo i Serra <eballetbo@gmail.com>
Cc: Javier Martinez Canillas <javier@dowhile0.org>
Cc: linux-omap@vger.kernel.org
Signed-off-by: Tony Lindgren <tony@atomide.com>
2017-11-10 08:15:56 -08:00
Kees Cook
6c78935777 video: fbdev: Convert timers to use timer_setup()
In preparation for unconditionally passing the struct timer_list pointer to
all timer callbacks, switch to using the new timer_setup() and from_timer()
to pass the timer pointer explicitly. One tracking pointer was added.

Signed-off-by: Kees Cook <keescook@chromium.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: David Lechner <david@lechnology.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Sean Paul <seanpaul@chromium.org>
Cc: Jean Delvare <jdelvare@suse.de>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: "Gustavo A. R. Silva" <gustavo@embeddedor.com>
[b.zolnierkie: ported it over pxa3xx_gcu changes]
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
2017-11-10 16:34:52 +01:00
Kees Cook
e4a67df75a video: fbdev: pxa3xx_gcu: Convert timers to use timer_setup()
In preparation for unconditionally passing the struct timer_list pointer to
all timer callbacks, switch to using the new timer_setup() and from_timer()
to pass the timer pointer explicitly.

This also fixes the use of the "priv" variable in QERROR(), since it was
pointing to struct timer_list, not struct pxa3xx_gcu_priv.

Signed-off-by: Kees Cook <keescook@chromium.org>
Cc: "Gustavo A. R. Silva" <gustavo@embeddedor.com>
Cc: Himanshu Jha <himanshujha199640@gmail.com>
[b.zolnierkie: trivial build fixup]
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
2017-11-10 16:34:51 +01:00
Alexandre Belloni
eaa1dc7ba1 rtc: at91rm9200: fix reading alarm value
When alarm value is read at boot time, at91_alarm_year is not yet set to
the proper value so the year is always set to 1900.

This results in that kind of message at boot:
rtc rtc0: invalid alarm value: 1900-1-14 2:11:39

There is no way to recover from that as the alarm is now only read when
booting.

Instead, rely on the rtc core to figure out the proper year.

Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-11-10 16:24:32 +01:00
Alexandre Belloni
275ebe2b8f rtc: at91rm9200: stop calculating yday in at91_rtc_readalarm
Calculating yday in the read_alarm callback is useless as this value is
never used later. Also, it was buggy anyway because at the time this is
done, tm_year is always 0 as the alarm register doesn't hold the year.

Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-11-10 16:24:27 +01:00
Linus Walleij
d82e99a6f9 ARM: sa1100: simpad: Correct I2C GPIO offsets
Arnd reported the following build bug bug:

In file included from arch/arm/mach-sa1100/simpad.c:20:0:
arch/arm/mach-sa1100/include/mach/SA-1100.h:1118:18: error: large
integer implicitly truncated to unsigned type [-Werror=overflow]
                      (0x00000001 << (Nb))
                      ^
include/linux/gpio/machine.h:56:16: note: in definition of macro
'GPIO_LOOKUP_IDX'
.chip_hwnum = _chip_hwnum,
              ^~~~~~~~~~~
arch/arm/mach-sa1100/include/mach/SA-1100.h:1140:21: note: in
expansion of macro 'GPIO_GPIO'
                    ^~~~~~~~~
arch/arm/mach-sa1100/simpad.c:331:27: note: in expansion of
macro 'GPIO_GPIO21'
  GPIO_LOOKUP_IDX("gpio", GPIO_GPIO21, NULL, 0,

This is what happened:

commit b2e6355559
"i2c: gpio: Convert to use descriptors"
commit 4d0ce62c0a
"i2c: gpio: Augment all boardfiles to use open drain"
together uncovered an old bug in the Simpad board
file: as theGPIO_LOOKUP_IDX() encodes GPIO offsets
on gpiochips in an u16 (see <linux/gpio/machine.h>)
these GPIO "numbers" does not fit, since in
arch/arm/mach-sa1100/include/mach/SA-1100.h it is
defined as:

  #define GPIO_GPIO(Nb) (0x00000001 << (Nb))
  (...)
  #define GPIO_GPIO21 GPIO_GPIO(21) /* GPIO [21] */

This is however provably wrong, since the i2c-gpio
driver uses proper GPIO numbers, albeit earlier from
the global number space, whereas this GPIO_GPIO21
is the local line offset in the GPIO register, which
is used in other code but certainly not in the
gpiolib GPIO driver in drivers/gpio/gpio-sa1100.c, which
has code like this:

static void sa1100_gpio_set(struct gpio_chip *chip,
                            unsigned offset, int value)
{
    int reg = value ? R_GPSR : R_GPCR;

    writel_relaxed(BIT(offset),
        sa1100_gpio_chip(chip)->membase + reg);
}

So far everything however compiled fine as an unsigned
int was used to pass the GPIO numbers in
struct i2c_gpio_platform_data. We can trace the actual error
back to

commit dbd406f9d0
"ARM: 7025/1: simpad: add GPIO based device definitions."
This added the i2c_gpio with the wrong offsets.

This commit was before the SA1100 was converted to use
the gpiolib, but as can be seen from the contemporary
gpio.c in mach-sa1100, it was already using:

static int sa1100_gpio_get(struct gpio_chip *chip,
                           unsigned offset)
{
        return GPLR & GPIO_GPIO(offset);
}

And GPIO_GPIO() is essentially the BIT() macro.

Reported-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-11-10 15:48:07 +01:00
Christoph Hellwig
96271654f5 coredump: call do_unlinkat directly instead of sys_unlink
And stop messing with the address limit.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-11-10 08:48:49 -05:00
Christoph Hellwig
da2f1362c8 fs: expose do_unlinkat for built-in callers
And make it take a struct filename instead of a user pointer.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-11-10 08:48:46 -05:00
Al Viro
e145b35bb9 ext4: take handling of EXT4_IOC_GROUP_ADD into a helper, get rid of set_fs()
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-11-10 08:48:44 -05:00
Al Viro
24219d21c7 ipmi: get rid of pointless access_ok()
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-11-10 08:48:42 -05:00
Al Viro
50271d388f pi433: sanitize ioctl
a) those access_ok() are pointless
b) guarding against the ioctl number declaration changes in that
way is pointless, especially since we _know_ the size of object
we want to copy.

[folded braino fixes from Colin Ian King and Dan Carpenter]

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-11-10 08:48:20 -05:00
Chris Wilson
30b29406d9 drm/i915: Restore the wait for idle engine after flushing interrupts
So it appears that commit 5427f20785 ("drm/i915: Bump wait-times for
the final CS interrupt before parking") was a little over optimistic in
its belief that it had successfully waited for all residual activity on
the engines before parking. Numerous sightings in CI since then of

<7>[   52.542886] [IGT] core_auth: executing
<3>[   52.561013] [drm:intel_engines_park [i915]] *ERROR* vcs0 is not idle before parking
<7>[   52.561215] intel_engines_park vcs0
<7>[   52.561229] intel_engines_park 	current seqno 98, last 98, hangcheck 0 [-247449 ms], inflight 0
<7>[   52.561238] intel_engines_park 	Reset count: 0
<7>[   52.561266] intel_engines_park 	Requests:
<7>[   52.561363] intel_engines_park 	RING_START: 0x00000000 [0x00000000]
<7>[   52.561377] intel_engines_park 	RING_HEAD:  0x00000000 [0x00000000]
<7>[   52.561390] intel_engines_park 	RING_TAIL:  0x00000000 [0x00000000]
<7>[   52.561406] intel_engines_park 	RING_CTL:   0x00000000
<7>[   52.561422] intel_engines_park 	RING_MODE:  0x00000200 [idle]
<7>[   52.561442] intel_engines_park 	ACTHD:  0x00000000_00000000
<7>[   52.561459] intel_engines_park 	BBADDR: 0x00000000_00000000
<7>[   52.561474] intel_engines_park 	Execlist status: 0x00000301 00000000
<7>[   52.561489] intel_engines_park 	Execlist CSB read 5 [5 cached], write 5 [5 from hws], interrupt posted? no
<7>[   52.561500] intel_engines_park 		ELSP[0] idle
<7>[   52.561510] intel_engines_park 		ELSP[1] idle
<7>[   52.561519] intel_engines_park 		HW active? 0x0
<7>[   52.561608] intel_engines_park Idle? yes
<7>[   52.561617] intel_engines_park

on Braswell, which indicates that the engine just needs that little bit
longer after flushing the tasklet to settle. So give it a few more
milliseconds before declaring an err and applying the emergency brake.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=103479
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171110112550.28909-1-chris@chris-wilson.co.uk
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
2017-11-10 12:55:57 +00:00
Michael S. Tsirkin
450cbdd012 locking/x86: Use LOCK ADD for smp_mb() instead of MFENCE
MFENCE appears to be way slower than a locked instruction - let's use
LOCK ADD unconditionally, as we always did on old 32-bit.

Performance testing results:

  perf stat -r 10 -- ./virtio_ring_0_9 --sleep --host-affinity 0 --guest-affinity 0
  Before:
         0.922565990 seconds time elapsed                                          ( +-  1.15% )
  After:
         0.578667024 seconds time elapsed                                          ( +-  1.21% )

i.e. about ~60% faster.

Just poking at SP would be the most natural, but if we then read the
value from SP, we get a false dependency which will slow us down.

This was noted in this article:

  http://shipilev.net/blog/2014/on-the-fence-with-dependencies/

And is easy to reproduce by sticking a barrier in a small non-inline
function.

So let's use a negative offset - which avoids this problem since we
build with the red zone disabled.

For userspace, use an address just below the redzone.

The one difference between LOCK ADD and MFENCE is that LOCK ADD does
not affect CLFLUSH, previous patches converted all uses of CLFLUSH to
call mb(), such that changes to smp_mb() won't affect it.

Update mb/rmb/wmb() on 32-bit to use the negative offset, too, for
consistency.

As a follow-up, it might be worth considering switching users
of CLFLUSH to another API (e.g. clflush_mb()?) - we will
then be able to convert mb() to smp_mb() again.

Also arguably, GCC should switch to use LOCK ADD for __sync_synchronize().
This might be worth pursuing separately.

Suggested-by: Andy Lutomirski <luto@amacapital.net>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: qemu-devel@nongnu.org
Cc: virtualization@lists.linux-foundation.org
Link: http://lkml.kernel.org/r/1509118355-4890-1-git-send-email-mst@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-11-10 13:43:44 +01:00
oder_chiou@realtek.com
de6ae8afb9
ASoC: rt5663: Check the JD status in the button pushing
Check the JD status in the button pushing to prevent the IRQ that is locked
by button pushing event while the jack unpluging.

Signed-off-by: Oder Chiou <oder_chiou@realtek.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2017-11-10 12:34:52 +00:00
Keerthy
125b1192bd
regulator: tps65218: remove unused tps_info structure
remove unused tps_info structure.

Signed-off-by: Keerthy <j-keerthy@ti.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2017-11-10 12:33:15 +00:00
Keerthy
efeb88c68b
regulator: tps65218: Fix strobe assignment
Currentlly tps_info structure is no longer used. So use the
strobes parameter in tps65218 structure to capture the info.

Fixes: 2dc4940360 (regulator: tps65218: Remove all the compatibles)
Signed-off-by: Keerthy <j-keerthy@ti.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2017-11-10 12:33:12 +00:00
Sébastien Szymanski
7da85fbf1c HID: cp2112: fix broken gpio_direction_input callback
When everything goes smoothly, ret is set to 0 which makes the function
to return EIO error.

Fixes: 8e9faa1546 ("HID: cp2112: fix gpio-callback error handling")
Signed-off-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2017-11-10 13:32:35 +01:00
Hans de Goede
a5266db4d3 drm/i915: Acquire PUNIT->PMIC bus for intel_uncore_forcewake_reset()
intel_uncore_forcewake_reset() does forcewake puts and gets as such
we need to make sure that no-one tries to access the PUNIT->PMIC bus
(on systems where this bus is shared) while it runs, otherwise bad
things happen.

Normally this is taken care of by the i915_pmic_bus_access_notifier()
which does an intel_uncore_forcewake_get(FORCEWAKE_ALL) when some other
driver tries to access the PMIC bus, so that later forcewake gets are
no-ops (for the duration of the bus access).

But intel_uncore_forcewake_reset gets called in 3 cases:
1) Before registering the pmic_bus_access_notifier
2) After unregistering the pmic_bus_access_notifier
3) To reset forcewake state on a GPU reset

In all 3 cases the i915_pmic_bus_access_notifier() protection is
insufficient.

This commit fixes this race by calling iosf_mbi_punit_acquire() before
calling intel_uncore_forcewake_reset(). In the case where it is called
directly after unregistering the pmic_bus_access_notifier, we need to
hold the punit-lock over both calls to avoid a race where
intel_uncore_fw_release_timer() may execute between the 2 calls.

Reviewed-by: Imre Deak <imre.deak@intel.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171019111620.26761-3-hdegoede@redhat.com
2017-11-10 13:14:03 +01:00
Hans de Goede
af0ab55ffe x86/platform/intel/iosf_mbi: Add unlocked PMIC bus access notifier unregister
For race free unregistration drivers may need to acquire PMIC bus access
through iosf_mbi_punit_acquire() and then (un)register the notifier without
dropping the lock.

This commit adds an unlocked variant of
iosf_mbi_unregister_pmic_bus_access_notifier for this use case.

Acked-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171019111620.26761-2-hdegoede@redhat.com
2017-11-10 13:14:02 +01:00
Chris Wilson
c16c4ba725 drm/i915: Move irqs enabled assertion deeper for mock breadcrumbs
In order to allow the mock breadcrumbs tests to run without device irqs
being enabled, move the intel_irqs_enabled() assert deeper to just
before we commit to enabling the HW irq.

v2: Add a FIXME explaining that placing the assertion so deep is not
ideal, but a compromise for mock breadcrumbs.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Matthew Auld <matthew.william.auld@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171107102003.1802-1-chris@chris-wilson.co.uk
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
2017-11-10 11:52:57 +00:00
Michał Mirosław
a86f25518e virtgpu: remove redundant task_comm copying
Remove redundant task name copying because:

1. task->comm is already NUL-terminated
2. virtio_gpu_context_create() trims passed dbgname anyway

Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Link: http://patchwork.freedesktop.org/patch/msgid/588612bbc672e8b598e10f79fcbc041122e844ba.1504202471.git.mirq-linux@rere.qmqm.pl
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2017-11-10 12:45:35 +01:00
Colin Ian King
4013e44ffa drm: qxl: remove pr_info message, stops log spamming
Simply mmap'ing /dev/dri/card0 repeatedly will spam the kernel
log with qxl_mmap information messages. The following example code
illustrates this:

int main(void)
{
	int fd = open("/dev/dri/card0", O_RDONLY);
	if (fd == -1)
		err(1, "open failed");

	for (;;) {
		void *m = mmap(NULL, 4096, PROT_READ,
			MAP_SHARED, fd, 0);
		if (m != MAP_FAILED)
			munmap(m, 4096);
	}
}

Stop the spamming by removing the pr_info message. Since the mmap'ing
returns -EINVAL there is no need for the pr_info message.

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170912173422.14062-1-colin.king@canonical.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2017-11-10 12:45:35 +01:00
Lepton Wu
adbf6eb3cd drm/cirrus: add create_handle support.
Add create_handle support to cirrus fb. Without this, screenshot tool
in chromium OS can't work.

Signed-off-by: Lepton Wu <ytht.net@gmail.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20171108185537.56167-1-ytht.net@gmail.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2017-11-10 12:45:34 +01:00
Lepton Wu
7bac534e02 drm/virtio: add create_handle support.
Add create_handle support to virtio fb. Without this, screenshot tool
in chromium OS can't work.

Signed-off-by: Lepton Wu <ytht.net@gmail.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20171108184209.46211-1-ytht.net@gmail.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2017-11-10 12:45:34 +01:00
Chris Wilson
b1a1e5d2ce drm/i915/selftests: Reduce the volume of the timeout message
Originally it was anticipated that timeouts would be a rare event, and
so merit a warning that the test was incomplete. However, for igt we
keep the timeout low, and hitting the timeout is intentional. It no
longer necessitates a warning, but to be expected.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171110101110.12042-1-chris@chris-wilson.co.uk
Reviwed-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
2017-11-10 11:31:58 +00:00
Eric Biggers
1d9ddde12e lib/mpi: call cond_resched() from mpi_powm() loop
On a non-preemptible kernel, if KEYCTL_DH_COMPUTE is called with the
largest permitted inputs (16384 bits), the kernel spends 10+ seconds
doing modular exponentiation in mpi_powm() without rescheduling.  If all
threads do it, it locks up the system.  Moreover, it can cause
rcu_sched-stall warnings.

Notwithstanding the insanity of doing this calculation in kernel mode
rather than in userspace, fix it by calling cond_resched() as each bit
from the exponent is processed.  It's still noninterruptible, but at
least it's preemptible now.

Do the cond_resched() once per bit rather than once per MPI limb because
each limb might still easily take 100+ milliseconds on slow CPUs.

Cc: <stable@vger.kernel.org> # v4.12+
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-11-10 19:20:26 +08:00
Lionel Debieve
63c53823f0 crypto: stm32/hash - Fix return issue on update
When data append reached the threshold for processing,
we must inform that processing is on going to wait before
managing the next request.

Signed-off-by: Lionel Debieve <lionel.debieve@st.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-11-10 19:20:23 +08:00
Eric Biggers
ced6a58638 crypto: dh - Remove pointless checks for NULL 'p' and 'g'
Neither 'p' nor 'g' can be NULL, as they were unpacked using
crypto_dh_decode_key().  And it makes no sense for them to be optional.
So remove the NULL checks that were copy-and-pasted into both modules.

Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-11-10 19:20:22 +08:00
Eric Biggers
5829cc8da9 crypto: qat - Clean up error handling in qat_dh_set_secret()
Update the error handling in qat_dh_set_secret() to mirror
dh_set_secret().  The new version is less error-prone because freeing
memory and setting the pointers to NULL is now only done in one place.

Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-11-10 19:20:20 +08:00
Eric Biggers
ccd9888f14 crypto: dh - Don't permit 'key' or 'g' size longer than 'p'
The "qat-dh" DH implementation assumes that 'key' and 'g' can be copied
into a buffer with size 'p_size'.  However it was never checked that
that was actually the case, which most likely allowed users to cause a
buffer underflow via KEYCTL_DH_COMPUTE.

Fix this by updating crypto_dh_decode_key() to verify this precondition
for all DH implementations.

Fixes: c9839143eb ("crypto: qat - Add DH support")
Cc: <stable@vger.kernel.org> # v4.8+
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-11-10 19:20:17 +08:00
Eric Biggers
199512b123 crypto: dh - Don't permit 'p' to be 0
If 'p' is 0 for the software Diffie-Hellman implementation, then
dh_max_size() returns 0.  In the case of KEYCTL_DH_COMPUTE, this causes
ZERO_SIZE_PTR to be passed to sg_init_one(), which with
CONFIG_DEBUG_SG=y triggers the 'BUG_ON(!virt_addr_valid(buf));' in
sg_set_buf().

Fix this by making crypto_dh_decode_key() reject 0 for 'p'.  p=0 makes
no sense for any DH implementation because 'p' is supposed to be a prime
number.  Moreover, 'mod 0' is not mathematically defined.

Bug report:

    kernel BUG at ./include/linux/scatterlist.h:140!
    invalid opcode: 0000 [#1] SMP KASAN
    CPU: 0 PID: 27112 Comm: syz-executor2 Not tainted 4.14.0-rc7-00010-gf5dbb5d0ce32-dirty #7
    Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.3-20171021_125229-anatol 04/01/2014
    task: ffff88006caac0c0 task.stack: ffff88006c7c8000
    RIP: 0010:sg_set_buf include/linux/scatterlist.h:140 [inline]
    RIP: 0010:sg_init_one+0x1b3/0x240 lib/scatterlist.c:156
    RSP: 0018:ffff88006c7cfb08 EFLAGS: 00010216
    RAX: 0000000000010000 RBX: ffff88006c7cfe30 RCX: 00000000000064ee
    RDX: ffffffff81cf64c3 RSI: ffffc90000d72000 RDI: ffffffff92e937e0
    RBP: ffff88006c7cfb30 R08: ffffed000d8f9fab R09: ffff88006c7cfd30
    R10: 0000000000000005 R11: ffffed000d8f9faa R12: ffff88006c7cfd30
    R13: 0000000000000000 R14: 0000000000000010 R15: ffff88006c7cfc50
    FS:  00007fce190fa700(0000) GS:ffff88003ea00000(0000) knlGS:0000000000000000
    CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
    CR2: 00007fffc6b33db8 CR3: 000000003cf64000 CR4: 00000000000006f0
    Call Trace:
     __keyctl_dh_compute+0xa95/0x19b0 security/keys/dh.c:360
     keyctl_dh_compute+0xac/0x100 security/keys/dh.c:434
     SYSC_keyctl security/keys/keyctl.c:1745 [inline]
     SyS_keyctl+0x72/0x2c0 security/keys/keyctl.c:1641
     entry_SYSCALL_64_fastpath+0x1f/0xbe
    RIP: 0033:0x4585c9
    RSP: 002b:00007fce190f9bd8 EFLAGS: 00000216 ORIG_RAX: 00000000000000fa
    RAX: ffffffffffffffda RBX: 0000000000738020 RCX: 00000000004585c9
    RDX: 000000002000d000 RSI: 0000000020000ff4 RDI: 0000000000000017
    RBP: 0000000000000046 R08: 0000000020008000 R09: 0000000000000000
    R10: 0000000000000000 R11: 0000000000000216 R12: 00007fff6e610cde
    R13: 00007fff6e610cdf R14: 00007fce190fa700 R15: 0000000000000000
    Code: 03 0f b6 14 02 48 89 f8 83 e0 07 83 c0 03 38 d0 7c 04 84 d2 75 33 5b 45 89 6c 24 14 41 5c 41 5d 41 5e 41 5f 5d c3 e8 fd 8f 68 ff <0f> 0b e8 f6 8f 68 ff 0f 0b e8 ef 8f 68 ff 0f 0b e8 e8 8f 68 ff 20
    RIP: sg_set_buf include/linux/scatterlist.h:140 [inline] RSP: ffff88006c7cfb08
    RIP: sg_init_one+0x1b3/0x240 lib/scatterlist.c:156 RSP: ffff88006c7cfb08

Fixes: 802c7f1c84 ("crypto: dh - Add DH software implementation")
Cc: <stable@vger.kernel.org> # v4.8+
Reviewed-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-11-10 19:20:17 +08:00
Eric Biggers
12d41a023e crypto: dh - Fix double free of ctx->p
When setting the secret with the software Diffie-Hellman implementation,
if allocating 'g' failed (e.g. if it was longer than
MAX_EXTERN_MPI_BITS), then 'p' was freed twice: once immediately, and
once later when the crypto_kpp tfm was destroyed.

Fix it by using dh_free_ctx() (renamed to dh_clear_ctx()) in the error
paths, as that correctly sets the pointers to NULL.

KASAN report:

    MPI: mpi too large (32760 bits)
    ==================================================================
    BUG: KASAN: use-after-free in mpi_free+0x131/0x170
    Read of size 4 at addr ffff88006c7cdf90 by task reproduce_doubl/367

    CPU: 1 PID: 367 Comm: reproduce_doubl Not tainted 4.14.0-rc7-00040-g05298abde6fe #7
    Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011
    Call Trace:
     dump_stack+0xb3/0x10b
     ? mpi_free+0x131/0x170
     print_address_description+0x79/0x2a0
     ? mpi_free+0x131/0x170
     kasan_report+0x236/0x340
     ? akcipher_register_instance+0x90/0x90
     __asan_report_load4_noabort+0x14/0x20
     mpi_free+0x131/0x170
     ? akcipher_register_instance+0x90/0x90
     dh_exit_tfm+0x3d/0x140
     crypto_kpp_exit_tfm+0x52/0x70
     crypto_destroy_tfm+0xb3/0x250
     __keyctl_dh_compute+0x640/0xe90
     ? kasan_slab_free+0x12f/0x180
     ? dh_data_from_key+0x240/0x240
     ? key_create_or_update+0x1ee/0xb20
     ? key_instantiate_and_link+0x440/0x440
     ? lock_contended+0xee0/0xee0
     ? kfree+0xcf/0x210
     ? SyS_add_key+0x268/0x340
     keyctl_dh_compute+0xb3/0xf1
     ? __keyctl_dh_compute+0xe90/0xe90
     ? SyS_add_key+0x26d/0x340
     ? entry_SYSCALL_64_fastpath+0x5/0xbe
     ? trace_hardirqs_on_caller+0x3f4/0x560
     SyS_keyctl+0x72/0x2c0
     entry_SYSCALL_64_fastpath+0x1f/0xbe
    RIP: 0033:0x43ccf9
    RSP: 002b:00007ffeeec96158 EFLAGS: 00000246 ORIG_RAX: 00000000000000fa
    RAX: ffffffffffffffda RBX: 000000000248b9b9 RCX: 000000000043ccf9
    RDX: 00007ffeeec96170 RSI: 00007ffeeec96160 RDI: 0000000000000017
    RBP: 0000000000000046 R08: 0000000000000000 R09: 0248b9b9143dc936
    R10: 0000000000001000 R11: 0000000000000246 R12: 0000000000000000
    R13: 0000000000409670 R14: 0000000000409700 R15: 0000000000000000

    Allocated by task 367:
     save_stack_trace+0x16/0x20
     kasan_kmalloc+0xeb/0x180
     kmem_cache_alloc_trace+0x114/0x300
     mpi_alloc+0x4b/0x230
     mpi_read_raw_data+0xbe/0x360
     dh_set_secret+0x1dc/0x460
     __keyctl_dh_compute+0x623/0xe90
     keyctl_dh_compute+0xb3/0xf1
     SyS_keyctl+0x72/0x2c0
     entry_SYSCALL_64_fastpath+0x1f/0xbe

    Freed by task 367:
     save_stack_trace+0x16/0x20
     kasan_slab_free+0xab/0x180
     kfree+0xb5/0x210
     mpi_free+0xcb/0x170
     dh_set_secret+0x2d7/0x460
     __keyctl_dh_compute+0x623/0xe90
     keyctl_dh_compute+0xb3/0xf1
     SyS_keyctl+0x72/0x2c0
     entry_SYSCALL_64_fastpath+0x1f/0xbe

Fixes: 802c7f1c84 ("crypto: dh - Add DH software implementation")
Cc: <stable@vger.kernel.org> # v4.8+
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-11-10 19:20:16 +08:00
Florian Fainelli
c3577f6100 hwrng: iproc-rng200 - Add support for BCM7278
BCM7278 features a RNG200 hardware random number generator block, add
support for this chip by matching the chip-specific compatible string
and extending the Kconfig dependencies to allow building on ARCH_BRCMSTB
(base platform for 7278).

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-11-10 19:20:12 +08:00
Florian Fainelli
8ddef132a3 dt-bindings: rng: Document BCM7278 RNG200 compatible
BCM7278 includes a RGN200 hardware random number generator, document the
compatible string for that version of the IP.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-11-10 19:20:08 +08:00
Nicholas Piggin
1696d0fb7f powerpc/64: Set DSCR default initially from SPR
Take the DSCR value set by firmware as the dscr_default value,
rather than zero.

POWER9 recommends DSCR default to a non-zero value.

Signed-off-by: From: Nicholas Piggin <npiggin@gmail.com>
[mpe: Make record_spr_defaults() __init]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-11-10 22:11:35 +11:00
Nicholas Piggin
339a3293f4 powerpc/powernv: Avoid waiting for secondary hold spinloop with OPAL
OPAL boot does not insert secondaries at 0x60 to wait at the secondary
hold spinloop. Instead they are started later, and inserted at
generic_secondary_smp_init(), which is after the secondary hold
spinloop.

Avoid waiting on this spinloop when booting with OPAL firmware. This
wait always times out that case.

This saves 100ms boot time on powernv, and 10s of seconds of real time
when booting on the simulator in SMP.

Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-11-10 22:00:54 +11:00
Arnd Bergmann
91d2c740f3 pinctrl: samsung/s3c24xx: add CONFIG_OF dependency
The driver fails to build without CONFIG_OF:

drivers/pinctrl/samsung/pinctrl-samsung.c: In function 'samsung_gpiolib_register':
drivers/pinctrl/samsung/pinctrl-samsung.c:936:5: error: 'struct gpio_chip' has no member named 'of_node'

This configuration is now possible since we can now select the
PINCTRL subsystem on S3C24xx machines other than the device tree
based ones.

Fixes: d219b92461 ("pinctrl: change Kconfig PINCTRL variable to a menuconfig")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-11-10 11:40:14 +01:00