Commit graph

932,869 commits

Author SHA1 Message Date
Josef Bacik
ff57dc94fa nbd: wait uninterruptible for the dead timeout
If we have a pending signal or the user kills their application then
it'll bring down the whole device, which is less than awesome.  Instead
wait uninterruptible for the dead timeout so we're sure we gave it our
best shot.

Fixes: 560bc4b399 ("nbd: handle dead connections")
Cc: stable@vger.kernel.org
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-11-06 14:15:02 -07:00
Alan Mizrahi
3faee9423c leds: Add driver for PC Engines APU/APU2 LEDs
This patch implements the driver to support the front panel LEDs
for PC Engines APU and APU2 boards.

Signed-off-by: Alan Mizrahi <alan@mizrahi.com.ve>
Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
2017-11-06 22:05:00 +01:00
Juergen Gross
8dca4d96c7 xen: select grant interface version
Grant v2 will be needed in cases where a frame number in the grant
table can exceed 32 bits. For PV guests this is a host feature, while
for HVM guests this is a guest feature.

So select grant v2 in case frame numbers can be larger than 32 bits
and grant v1 else.

For testing purposes add a way to specify the grant interface version
via a boot parameter.

Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
2017-11-06 15:50:17 -05:00
Juergen Gross
223c8f3349 xen: update arch/x86/include/asm/xen/cpuid.h
Update arch/x86/include/asm/xen/cpuid.h from the Xen tree to get newest
definitions.

Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
2017-11-06 15:50:17 -05:00
Juergen Gross
83c69324f4 xen: add grant interface version dependent constants to gnttab_ops
Instead of having multiple variables with constants like
grant_table_version or grefs_per_grant_frame add those to struct
gnttab_ops and access them just via the gnttab_interface pointer.

Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
2017-11-06 15:50:17 -05:00
Juergen Gross
56c9c700c4 xen: limit grant v2 interface to the v1 functionality
As there is currently no user for sub-page grants or transient grants
remove that functionality. This at once makes it possible to switch
from grant v2 to grant v1 without restrictions, as there is no loss of
functionality other than the limited frame number width related to
the switch.

Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
2017-11-06 15:50:17 -05:00
Juergen Gross
b988b8ff07 xen: re-introduce support for grant v2 interface
The grant v2 support was removed from the kernel with
commit 438b33c714 ("xen/grant-table:
remove support for V2 tables") as the higher memory footprint of v2
grants resulted in less grants being possible for a kernel compared
to the v1 grant interface.

As machines with more than 16TB of memory are expected to be more
common in the near future support of grant v2 is mandatory in order
to be able to run a Xen pv domain at any memory location.

So re-add grant v2 support basically by reverting above commit.

Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
2017-11-06 15:50:17 -05:00
Kees Cook
5ea22086ed block/aoe: discover_timer: Convert timers to use timer_setup()
In preparation for unconditionally passing the struct timer_list pointer to
all timer callbacks, switch to using the new timer_setup() and from_timer()
to pass the timer pointer explicitly.

This refactors the discover_timer to remove the needless locking and
state machine used for synchronizing timer death. Using del_timer_sync()
will already do the right thing.

Cc: Jens Axboe <axboe@kernel.dk>
Cc: "Ed L. Cashin" <ed.cashin@acm.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Kees Cook <keescook@chromium.org>
2017-11-06 12:50:09 -08:00
Kees Cook
10738ba8e0 ide: Convert timers to use timer_setup()
In preparation for unconditionally passing the struct timer_list pointer to
all timer callbacks, switch to using the new timer_setup() and from_timer()
to pass the timer pointer explicitly.

Cc: "David S. Miller" <davem@davemloft.net>
Cc: linux-ide@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
2017-11-06 12:50:03 -08:00
Kees Cook
2bccef39c0 drbd: Convert timers to use timer_setup()
In preparation for unconditionally passing the struct timer_list pointer to
all timer callbacks, switch to using the new timer_setup() and from_timer()
to pass the timer pointer explicitly.

Cc: Philipp Reisner <philipp.reisner@linbit.com>
Cc: Lars Ellenberg <lars.ellenberg@linbit.com>
Cc: drbd-dev@lists.linbit.com
Signed-off-by: Kees Cook <keescook@chromium.org>
2017-11-06 12:49:57 -08:00
Kees Cook
c6f15047dd mailbox: Convert timers to use timer_setup()
In preparation for unconditionally passing the struct timer_list pointer to
all timer callbacks, switch to using the new timer_setup() and from_timer()
to pass the timer pointer explicitly.

Cc: Ley Foon Tan <lftan@altera.com>
Cc: Jassi Brar <jassisinghbrar@gmail.com>
Cc: nios2-dev@lists.rocketboards.org
Signed-off-by: Kees Cook <keescook@chromium.org>
2017-11-06 12:49:51 -08:00
Kees Cook
f34d8d506e crypto: Convert timers to use timer_setup()
In preparation for unconditionally passing the struct timer_list pointer to
all timer callbacks, switch to using the new timer_setup() and from_timer()
to pass the timer pointer explicitly.

Cc: Jesper Nilsson <jesper.nilsson@axis.com>
Cc: Lars Persson <lars.persson@axis.com>
Cc: Niklas Cassel <niklas.cassel@axis.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jamie Iles <jamie@jamieiles.com>
Cc: linux-arm-kernel@axis.com
Cc: linux-crypto@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Acked-by: Jamie Iles <jamie@jamieiles.com>
Acked-by: Lars Persson <lars.persson@axis.com> # for axis
2017-11-06 12:49:44 -08:00
Kees Cook
439dc05fbf drivers/pcmcia: omap1: Fix error in automated timer conversion
One part of automated timer conversion tools did not take into account
void * variables when searching out prior direct timer callback usage,
which resulted in an attempt to dereference the timer field without a
proper type.

Reported-by: kbuild test robot
Signed-off-by: Kees Cook <keescook@chromium.org>
2017-11-06 12:49:15 -08:00
Kees Cook
14c8276d3b ARM: footbridge: Fix typo in timer conversion
This fixes a missing semi-colon. It went unnoticed initially since it is
only built under certain defconfigs.

Reported-by: kbuild test robot
Signed-off-by: Kees Cook <keescook@chromium.org>
2017-11-06 12:49:07 -08:00
Linus Torvalds
e4880bc5df Merge branch 'for-4.14-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq
Pull workqueue fix from Tejun Heo:
 "Another fix for a really old bug.

  It only affects drain_workqueue() which isn't used often and even then
  triggers only during a pretty small race window, so it isn't too
  surprising that it stayed hidden for so long.

  The fix is straight-forward and low-risk. Kudos to Li Bin for
  reporting and fixing the bug"

* 'for-4.14-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
  workqueue: Fix NULL pointer dereference
2017-11-06 12:26:49 -08:00
Roman Gushchin
5f2e673405 cgroup: export list of cgroups v2 features using sysfs
The active development of cgroups v2 sometimes leads to a creation
of interfaces, which are not turned on by default (to provide
backward compatibility). It's handy to know from userspace, which
cgroup v2 features are supported without calculating it based
on the kernel version. So, let's export the list of such features
using /sys/kernel/cgroup/features pseudo-file.

The list is hardcoded and has to be extended when new functionality
is added. Each feature is printed on a new line.

Example:
  $ cat /sys/kernel/cgroup/features
  nsdelegate

Signed-off-by: Roman Gushchin <guro@fb.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: kernel-team@fb.com
Signed-off-by: Tejun Heo <tj@kernel.org>
2017-11-06 12:01:57 -08:00
Roman Gushchin
01ee6cfb14 cgroup: export list of delegatable control files using sysfs
Delegatable cgroup v2 control files may require special handling
(e.g. chowning), and the exact list of such files varies between
kernel versions (and likely to be extended in the future).

To guarantee correctness of this list and simplify the life
of userspace (systemd, first of all), let's export the list
via /sys/kernel/cgroup/delegate pseudo-file.

Format is siple: each control file name is printed on a new line.
Example:
  $ cat /sys/kernel/cgroup/delegate
  cgroup.procs
  cgroup.subtree_control

Signed-off-by: Roman Gushchin <guro@fb.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: kernel-team@fb.com
Signed-off-by: Tejun Heo <tj@kernel.org>
2017-11-06 12:01:54 -08:00
Christoph Hellwig
181fdfe662 xfs: mark xlog_verify_dest_ptr STATIC
We already did it in the forward declaration, but not for the function
body itself.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2017-11-06 11:57:39 -08:00
Christoph Hellwig
e89fbb5ee1 xfs: mark xlog_recover_check_summary STATIC
We already did it in the forward declaration, but not for the function
body itself.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2017-11-06 11:57:39 -08:00
Christoph Hellwig
4483eb566b xfs: mark xfs_btree_check_lblock and xfs_btree_check_ptr static
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2017-11-06 11:57:39 -08:00
Christoph Hellwig
a61a2c8683 xfs: remove unreachable error injection code in xfs_qm_dqget
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2017-11-06 11:57:39 -08:00
Christoph Hellwig
afd72454e1 xfs: remove unused debug counts for xfs_lock_inodes
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2017-11-06 11:57:39 -08:00
Christoph Hellwig
4371155e80 xfs: mark xfs_errortag_ktype static
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2017-11-06 11:57:39 -08:00
Christoph Hellwig
88aa5de46b xfs: trivial sparse fixes for the new scrub code
[darrick: fix broken initializer in xfs_scrub_xattr]

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2017-11-06 11:53:58 -08:00
Christoph Hellwig
fc41e2a193 xfs: always define STATIC to static noinline
Ever since we added the noinline tag there is no good reason to define
away the static for debug builds - we'll get just as good debug
information with our without it, so don't mess up sparse and other
checkers due to it.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2017-11-06 11:53:58 -08:00
Christoph Hellwig
866d7826c9 xfs: move xfs_bmbt_irec and xfs_exntst_t to xfs_types.h
Neither defines an on-disk format, so move them out of xfs_format.h.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2017-11-06 11:53:41 -08:00
Christoph Hellwig
dac9c9b137 xfs: pass struct xfs_bmbt_irec to xfs_bmbt_validate_extent
This removed an unaligned load per extent, as well as the manual poking
into the on-disk extent format.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2017-11-06 11:53:41 -08:00
Christoph Hellwig
c38ccf5990 xfs: remove the nr_extents argument to xfs_iext_remove
We only have two places that remove 2 extents at the same time, so unroll
the loop there.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2017-11-06 11:53:41 -08:00
Christoph Hellwig
0254c2f253 xfs: remove the nr_extents argument to xfs_iext_insert
We only have two places that insert 2 extents at the same time, so unroll
the loop there.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2017-11-06 11:53:41 -08:00
Christoph Hellwig
6bdcf26ade xfs: use a b+tree for the in-core extent list
Replace the current linear list and the indirection array for the in-core
extent list with a b+tree to avoid the need for larger memory allocations
for the indirection array when lots of extents are present.  The current
extent list implementations leads to heavy pressure on the memory
allocator when modifying files with a high extent count, and can lead
to high latencies because of that.

The replacement is a b+tree with a few quirks.  The leaf nodes directly
store the extent record in two u64 values.  The encoding is a little bit
different from the existing in-core extent records so that the start
offset and length which are required for lookups can be retreived with
simple mask operations.  The inner nodes store a 64-bit key containing
the start offset in the first half of the node, and the pointers to the
next lower level in the second half.  In either case we walk the node
from the beginninig to the end and do a linear search, as that is more
efficient for the low number of cache lines touched during a search
(2 for the inner nodes, 4 for the leaf nodes) than a binary search.
We store termination markers (zero length for the leaf nodes, an
otherwise impossible high bit for the inner nodes) to terminate the key
list / records instead of storing a count to use the available cache
lines as efficiently as possible.

One quirk of the algorithm is that while we normally split a node half and
half like usual btree implementations we just spill over entries added at
the very end of the list to a new node on its own.  This means we get a
100% fill grade for the common cases of bulk insertion when reading an
inode into memory, and when only sequentially appending to a file.  The
downside is a slightly higher chance of splits on the first random
insertions.

Both insert and removal manually recurse into the lower levels, but
the bulk deletion of the whole tree is still implemented as a recursive
function call, although one limited by the overall depth and with very
little stack usage in every iteration.

For the first few extents we dynamically grow the list from a single
extent to the next powers of two until we have a first full leaf block
and that building the actual tree.

The code started out based on the generic lib/btree.c code from Joern
Engel based on earlier work from Peter Zijlstra, but has since been
rewritten beyond recognition.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2017-11-06 11:53:41 -08:00
Christoph Hellwig
135dcc10d6 xfs: allow unaligned extent records in xfs_bmbt_disk_set_all
To make life a little simpler make xfs_bmbt_set_all unaligned access
aware so that we can use it directly on the destination buffer.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2017-11-06 11:53:41 -08:00
Christoph Hellwig
43518812d2 xfs: remove support for inlining data/extents into the inode fork
Supporting a small bit of data inside the inode fork blows up the fork size
a lot, removing the 32 bytes of inline data halves the effective size of
the inode fork (and it still has a lot of unused padding left), and the
performance of a single kmalloc doesn't show up compared to the size to read
an inode or create one.

It also simplifies the fork management code a lot.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2017-11-06 11:53:40 -08:00
Christoph Hellwig
b121459c7a xfs: simplify xfs_reflink_convert_cow
Instead of looking up extents to convert and calling xfs_bmapi_write on
each of them just let xfs_bmapi_write handle the full range.  To make
this robust add a new XFS_BMAPI_CONVERT_ONLY that only converts ranges
and never allocates blocks.

[darrick: shorten the stringified CONVERT_ONLY trace flag]

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2017-11-06 11:53:40 -08:00
Christoph Hellwig
41caabd0ab xfs: iterate backwards in xfs_reflink_cancel_cow_blocks
Match the iteration order for extent deletion in the truncate and
reflink I/O completion path.

This also happens to make implementing the new incore extent list
a lot easier.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2017-11-06 11:53:40 -08:00
Christoph Hellwig
b2b1712a64 xfs: introduce the xfs_iext_cursor abstraction
Add a new xfs_iext_cursor structure to hide the direct extent map
index manipulations. In addition to the existing lookup/get/insert/
remove and update routines new primitives to get the first and last
extent cursor, as well as moving up and down by one extent are
provided.  Also new are convenience to increment/decrement the
cursor and retreive the new extent, as well as to peek into the
previous/next extent without updating the cursor and last but not
least a macro to iterate over all extents in a fork.

[darrick: rename for_each_iext to for_each_xfs_iext]

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2017-11-06 11:53:40 -08:00
Christoph Hellwig
906abed501 xfs: iterate over extents in xfs_bmap_extents_to_btree
This actually makes the function very slightly less efficient for now as we
detour through the expanded irect format between the in-core extent format
and the on-disk one instead of just endian swapping them.  But with the
incore extent btree the in-core one will use a different format and the
representation will be entirely hidden.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2017-11-06 11:53:40 -08:00
Christoph Hellwig
71565f4b92 xfs: iterate over extents in xfs_iextents_copy
This actually makes the function very slightly less efficient for now as we
detour through the expanded irect format between the in-core extent format
and the on-disk one instead of just endian swapping them.  But with the
incore extent btree the in-core one will use a different format and the
representation will be entirely hidden.  It also happens to make the
function a whole more readable.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2017-11-06 11:53:39 -08:00
Christoph Hellwig
f36bc228e1 xfs: pass an on-disk extent to xfs_bmbt_validate_extent
This prepares for getting rid of the current in-memory extent format.
At the end of the series we will change the calling convention again
to pass the xfs_bmbt_irec structure once it is available everywhere.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2017-11-06 11:53:39 -08:00
Christoph Hellwig
4263036100 xfs: treat idx as a cursor in xfs_bmap_collapse_extents
Stop poking before and after the index and just increment or decrement
it while doing our operations on it to prepare for a new extent list
implementation.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2017-11-06 11:53:39 -08:00
Christoph Hellwig
657fcb2336 xfs: treat idx as a cursor in xfs_bmap_del_extent_*
Stop poking before and after the index and just increment or decrement
it while doing our operations on it to prepare for a new extent list
implementation.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2017-11-06 11:53:39 -08:00
Christoph Hellwig
a681847796 xfs: treat idx as a cursor in xfs_bmap_add_extent_unwritten_real
Stop poking before and after the index and just increment or decrement
it while doing our operations on it to prepare for a new extent list
implementation.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2017-11-06 11:53:39 -08:00
Christoph Hellwig
1d2e0089e1 xfs: treat idx as a cursor in xfs_bmap_add_extent_hole_real
Stop poking before and after the index and just increment or decrement
it while doing our operations on it to prepare for a new extent list
implementation.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2017-11-06 11:53:39 -08:00
Christoph Hellwig
41d196f439 xfs: treat idx as a cursor in xfs_bmap_add_extent_hole_delay
Stop poking before and after the index and just increment or decrement
it while doing our operations on it to prepare for a new extent list
implementation.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2017-11-06 11:53:38 -08:00
Christoph Hellwig
0d045540ed xfs: treat idx as a cursor in xfs_bmap_add_extent_delay_real
Stop poking before and after the index and just increment or decrement
it while doing our operations on it to prepare for a new extent list
implementation.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2017-11-06 11:53:38 -08:00
Christoph Hellwig
bf99971c82 xfs: remove a duplicate assignment in xfs_bmap_add_extent_delay_real
Reported-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2017-11-06 11:53:38 -08:00
Christoph Hellwig
1bfd7618cb xfs: don't create overlapping extents in xfs_bmap_add_extent_delay_real
Two cases in xfs_bmap_add_extent_delay_real currently insert a new
extent before updating the existing one that is being split.  While
this works fine with a simple extent list, a more complex tree can't
easily cope with overlapping extent.  Reshuffle the code a bit to update
the slot of the existing delalloc extent to the new real extent before
inserting the shortened delalloc extent before or after it.  This
avoids the overlapping extents while still allowing to update the
br_startblock field of the delalloc extent with the updated indirect
block reservation.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2017-11-06 11:53:38 -08:00
Felix Kuehling
115c8c4104 drm/amdkfd: Use order_base_2 to get log2 of buffes sizes
Replace (ffs(size) - 1) with order_base_2(size) as a more straight
forward way to get log2 of buffer sizes.

Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
2017-11-06 14:52:28 -05:00
Felix Kuehling
6d56693025 drm/amdkfd: Hardware DWORD size is 4 bytes
Don't use sizeof(uint32_t) or similar types for hardware or firmware
DWORD size. The hardware and firmware don't care about Linux types.

Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
2017-11-06 14:52:27 -05:00
Tobin C. Harding
136fc5c41f scripts: add leaking_addresses.pl
Currently we are leaking addresses from the kernel to user space. This
script is an attempt to find some of those leakages. Script parses
`dmesg` output and /proc and /sys files for hex strings that look like
kernel addresses.

Only works for 64 bit kernels, the reason being that kernel addresses on
64 bit kernels have 'ffff' as the leading bit pattern making greping
possible. On 32 kernels we don't have this luxury.

Scripts is _slightly_ smarter than a straight grep, we check for false
positives (all 0's or all 1's, and vsyscall start/finish addresses).

[ I think there is a lot of room for improvement here, but it's already
  useful, so I'm merging it as-is. The whole "hash %p format" series is
  expected to go into 4.15, but will not fix %x users, and will not
  incentivize people to look at what they are leaking.     - Linus ]

Signed-off-by: Tobin C. Harding <me@tobin.cc>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-11-06 11:46:42 -08:00
Vineet Gupta
92d4412824 ARCv2: Accomodate HS48 MMUv5 by relaxing MMU ver checking
HS48 cpus will have a new MMUv5, although Linux is currently not
explicitly supporting the newer features (so remains at V4).
The existing software/hardware version check is very tight and causes
boot abort. Given that the MMUv5 hardware is backwards compatible,
relax the boot check to allow current kernel support level to work
with new hardware.

Also while at it, move the ancient MMU related code to under ARCompact
builds as baseline MMU for HS cpus is v4.

Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2017-11-06 11:31:21 -08:00